site.conf 7.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232
  1. {
  2. -- A new node's name will be autogenerated from
  3. -- it's primary MAC address and this prefix.
  4. -- e.g. freifunk-0123456789ab
  5. hostname_prefix = 'freifunk',
  6. -- name of this site
  7. -- site_name = 'Freifunk Hochstift - ${site}',
  8. site_name = 'Bitte wählen',
  9. -- short name of this site
  10. -- site_code = 'ffho_${un-code}'
  11. site_code = 'ffho',
  12. -- v4 and v6 prefixes in which nodes+clients might get an IP
  13. prefix4 = '10.132.0.0/18',
  14. prefix6 = 'fdca:ffee:ff12:132::/64',
  15. -- extra ipv6 prefixes used in this mesh area
  16. additional_prefix6 = {
  17. '2001:470:6d:860::/64',
  18. '2a03:2260:2342:2300::/64',
  19. },
  20. -- timezone
  21. timezone = 'CET-1CEST,M3.5.0,M10.5.0/3', -- Europe/Berlin
  22. -- network-internal ntp service
  23. ntp_servers = {'ntp.in.ffho.net'},
  24. -- OpenWRT Package Repository (IPv6 capable)
  25. opkg_repo = 'http://openwrt.draic.info/%n/%v/%S/packages',
  26. -- regulatory domain of your wifi
  27. regdom = 'DE',
  28. -- wifi settings (2.4 GHz and 5 GHz)
  29. -- ssid = 'hochstift.freifunk.net/${kürzel}',
  30. -- mesh_ssid = 'ffho-mesh-${un-code}',
  31. -- mesh_bssid = '${idividual-mac}'
  32. wifi24 = {
  33. ssid = 'paderborn.freifunk.net',
  34. channel = 1,
  35. htmode = 'HT20',
  36. mesh_ssid = '02:d1:11:13:87:ad',
  37. mesh_bssid = '02:d1:11:13:87:ad',
  38. mesh_mcast_rate = 12000,
  39. },
  40. wifi5 = {
  41. ssid = 'paderborn.freifunk.net',
  42. channel = 44,
  43. htmode = 'HT40+',
  44. mesh_ssid = '02:d1:11:13:87:ad',
  45. mesh_bssid = '02:d1:11:13:87:ad',
  46. mesh_mcast_rate = 12000,
  47. },
  48. -- IP address of each router
  49. -- At this IP a client can always connect to its
  50. -- currently connected node. Both v4 and v6 addr.
  51. -- must lie in the above prefix4 and prefix6.
  52. next_node = {
  53. ip4 = '10.132.0.1',
  54. ip6 = 'fdca:ffee:ff12:132::1',
  55. -- mac address, must be unique in the client network
  56. -- (usually, you don't need to change this)
  57. mac = '16:41:95:40:f7:dc',
  58. },
  59. -- fastd (vpn) settings
  60. fastd_mesh_vpn = {
  61. -- cipher(s) to use
  62. methods = {'salsa2012+gmac'},
  63. -- the maximum transfer unit
  64. -- use 1426 for IPv4 gateways
  65. mtu = 1406,
  66. groups = {
  67. backbone = {
  68. -- specifies how many servers are contacted
  69. -- by a client simultanously
  70. limit = 1,
  71. -- list all available vpn servers
  72. peers = {
  73. gw01 = {
  74. -- public fastd key of the vpn server
  75. key = '97bc56ae561f67cfe15364134868c3553b5f1eab06f7bd9c5b93fbf280a52b51',
  76. -- remotes is an array of ways on how to reach the VPN server
  77. -- Use public addresses here, these addresses are used when the mesh might not be connected yet.
  78. -- format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000'
  79. remotes = {
  80. 'ipv6 "v6.gw01.paderborn.freifunk.net" port 10000',
  81. 'ipv4 "v4.gw01.paderborn.freifunk.net" port 10000',
  82. 'ipv6 "2a01:4f8:190:2105::ff12" port 10000',
  83. 'ipv4 "85.10.248.243" port 10000',
  84. },
  85. },
  86. gw02 = {
  87. key = 'e8fa9bf402fd33dd1ba804a97f2e46c704423ff49e9c55312845a7bfb93121ad',
  88. remotes = {
  89. 'ipv6 "v6.gw02.paderborn.freifunk.net" port 10000',
  90. 'ipv4 "v4.gw02.paderborn.freifunk.net" port 10000',
  91. 'ipv6 "2a01:4f8:190:6500::18:1" port 10000',
  92. 'ipv4 "78.46.242.24" port 10000',
  93. },
  94. },
  95. gw04 = {
  96. key = 'cf3855e5fa04e4c04a294cb6e8902f91c7ff7ef82bf031cc842a2b79b936677c',
  97. remotes = {
  98. 'ipv6 "v6.gw04.paderborn.freifunk.net" port 10000',
  99. 'ipv4 "v4.gw04.paderborn.freifunk.net" port 10000',
  100. 'ipv6 "2a02:450:1:4::10" port 10000',
  101. 'ipv4 "80.70.181.57" port 10000',
  102. },
  103. },
  104. gw05 = {
  105. key = 'd0d32a2f536a0fc1f0c848e6da15bd96851d5ff4fdf9239c830bab033ddcec1a',
  106. remotes = {
  107. 'ipv6 "v6.gw05.paderborn.freifunk.net" port 10000',
  108. 'ipv4 "v4.gw05.paderborn.freifunk.net" port 10000',
  109. 'ipv6 "2001:638:502:1884::ff05" port 10000',
  110. 'ipv4 "192.26.175.182" port 10000',
  111. },
  112. },
  113. gw06 = {
  114. key = 'b912bcf1c1335390364b8030448e53d8869b650f32923e59bf01d763d3028840',
  115. remotes = {
  116. 'ipv6 "v6.gw06.paderborn.freifunk.net" port 10000',
  117. 'ipv4 "v4.gw06.paderborn.freifunk.net" port 10000',
  118. 'ipv6 "2a03:4000:6:20f0::ff12" port 10000',
  119. 'ipv4 "5.45.111.222" port 10000',
  120. },
  121. },
  122. gw08 = {
  123. key = '3da050bbf1c3e95af286af65553f546fd563d9cb5d4b3b3444069bef281de621',
  124. remotes = {
  125. 'ipv6 "v6.gw08.paderborn.freifunk.net" port 10000',
  126. 'ipv4 "v4.gw08.paderborn.freifunk.net" port 10000',
  127. 'ipv6 "2a03:4000:6:1151::ff12" port 10000',
  128. 'ipv4 "5.45.107.59" port 10000',
  129. },
  130. },
  131. },
  132. },
  133. },
  134. },
  135. -- configure the autoupdater
  136. autoupdater = {
  137. enabled = 1,
  138. -- default branch for a firmware
  139. -- In config-mode, the user can select a different branch from below
  140. branch = 'stable',
  141. -- available branches for the autoupdater
  142. branches = {
  143. stable = {
  144. -- visible name of this branch (why not use the internal identifier here, too)
  145. name = 'stable',
  146. -- where to get the manifest file (without the trailing /manifest)
  147. -- It's wise to use an internal address here,
  148. -- but specifying a publicly available update site does not hurt.
  149. mirrors = {'http://[fdca:ffee:ff12:a254::80]/stable', 'http://firmware.paderborn.freifunk.net/stable'},
  150. -- Number of valid manifest signatures necessary to accept the manifest as "good".
  151. good_signatures = 3,
  152. -- list of public keys which are considered "good" for manifest signatures
  153. pubkeys = {
  154. '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
  155. 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
  156. 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
  157. 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
  158. 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
  159. '9841dde0b9f6485d5fcdc858fb15c1db1c3bc77fb81aef3f0d4b835f76a3d73b', -- kb-light
  160. },
  161. },
  162. testing = {
  163. name = 'testing',
  164. mirrors = {'http://[fdca:ffee:ff12:a254::80]/testing','http://firmware.paderborn.freifunk.net/testing'},
  165. good_signatures = 2,
  166. pubkeys = {
  167. '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
  168. 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
  169. 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
  170. 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
  171. 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
  172. '9841dde0b9f6485d5fcdc858fb15c1db1c3bc77fb81aef3f0d4b835f76a3d73b', -- kb-light
  173. },
  174. },
  175. experimental = {
  176. name = 'experimental',
  177. mirrors = {'http://[fdca:ffee:ff12:a254::80]/experimental','http://firmware.paderborn.freifunk.net/experimental'},
  178. good_signatures = 1,
  179. pubkeys = {
  180. '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
  181. 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
  182. 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
  183. 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
  184. 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
  185. '9841dde0b9f6485d5fcdc858fb15c1db1c3bc77fb81aef3f0d4b835f76a3d73b', -- kb-light
  186. },
  187. },
  188. },
  189. },
  190. -- default traffic shaping (bandwidth limit) settings
  191. simple_tc = {
  192. mesh_vpn = {
  193. ifname = 'mesh-vpn',
  194. enabled = false,
  195. limit_egress = 200,
  196. limit_ingress = 3000,
  197. },
  198. },
  199. -- configure ffho-debug
  200. debugserver = {
  201. host = { 'debugreport.ffho.net', 'fdca:ffee:ff12:a254::deb9' },
  202. port = 1337,
  203. liveport = 1338,
  204. },
  205. -- enable BATMAN on WAN interface by default (requires gluon-batman-on-wan package)
  206. batman_on_wan = 0,
  207. }