{
	-- name of this domain
	domain_names = {
		%DC = '%DN',
	},

	-- domain seed
	domain_seed = '%SE',

	-- hide this domain
	hide_domain = %HI,

	-- v4 and v6 prefixes in which nodes+clients might get an IP
	prefix4 = '%V4',
	prefix6 = '2a03:2260:2342:%V6::/64',

	-- wifi settings (2.4 GHz and 5 GHz)
	wifi24 = {
		ap = {
			ssid = '%SS',
		},
		mesh = {
			id = 'ffho-mesh-%MI',
		},
	},

	wifi5 = {
		ap = {
			ssid = '%SS',
		},
		mesh = {
			id = 'ffho-mesh-%MI',
		},
	},

	-- IP address of each router
	-- At this IP a client can always connect to its
	-- currently connected node. Both v4 and v6 addr.
	-- must lie in the above prefix4 and prefix6.
	next_node = {
		ip4 = '%N4',
		ip6 = '2a03:2260:2342:%V6::1',
		name = {'node.ffho.net', 'node.%DN.ffho.net', 'node.%MI.ffho.net', 'nextnode'},

		-- mac address, must be unique in the client network
		-- (usually, you don't need to change this)
		mac = 'f2:ff:ff:%ID:ff:ff',
	},

	mesh_vpn = {
		-- fastd (vpn) settings
		fastd = {
			groups = {
				backbone = {
					-- list all available vpn servers
					peers = {
						gw01 = {
							key = '97bc56ae561f67cfe15364134868c3553b5f1eab06f7bd9c5b93fbf280a52b51',
							-- remotes is an array of ways on how to reach the VPN server
							-- Use public addresses here, these addresses are used when the mesh might not be connected yet.
							-- format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000'
							remotes = {
								'"gw01.ffho.net" port 100%ID',
								'ipv6 "2001:830:c:9::12" port 100%ID',
								'ipv4 "80.242.130.70" port 100%ID',
							},
						},
						gw02 = {
							key = 'e8fa9bf402fd33dd1ba804a97f2e46c704423ff49e9c55312845a7bfb93121ad',
							remotes = {
								'"gw02.ffho.net" port 100%ID',
								'ipv6 "2a01:4f8:190:6500::18:1" port 100%ID',
								'ipv4 "78.46.242.24" port 100%ID',
							},
						},
						gw03 = {
							key = '629b2742922f068ef49558283aea4b75c1427d8cdd3fcd2dbd7c00880547d3b3',
							remotes = {
								'"gw03.ffho.net" port 100%ID',
								'ipv6 "2a00:13c8:1000:2::165" port 100%ID',
								'ipv4 "185.46.137.165" port 100%ID',
							},
						},
						gw04 = {
							key = 'cf3855e5fa04e4c04a294cb6e8902f91c7ff7ef82bf031cc842a2b79b936677c',
							remotes = {
								'"gw04.ffho.net" port 100%ID',
								'ipv6 "2a02:450:1::22" port 100%ID',
								'ipv4 "80.70.181.63" port 100%ID',
							},
						},
						gw05 = {
							key = 'd0d32a2f536a0fc1f0c848e6da15bd96851d5ff4fdf9239c830bab033ddcec1a',
							remotes = {
								'"gw05.ffho.net" port 100%ID',
								'ipv6 "2001:638:502:1884::ff15" port 100%ID',
								'ipv4 "192.26.175.183" port 100%ID',
							},
						},
						gw06 = {
							key = '88b570c4cc811259b7c4106943098c9bee1126d692ddacedd23cd48efc28b0bf',
							remotes = {
								'"gw06.ffho.net" port 100%ID',
							},
						},
					},
				},
			},
		},
	},

	-- configure the autoupdater
	autoupdater = {
		-- available branches for the autoupdater
		branches = {
			stable = {
				mirrors = {'http://firmware.srv.in.ffho.net/ffho_%DC/stable/sysupgrade', 'http://[2a03:2260:2342:f251::6]/ffho_%DC/stable/sysupgrade'},
			},
			testing = {
				mirrors = {'http://firmware.srv.in.ffho.net/ffho_%DC/testing/sysupgrade', 'http://[2a03:2260:2342:f251::6]/ffho_%DC/testing/sysupgrade'},
			},
			experimental = {
				mirrors = {'http://firmware.srv.in.ffho.net/ffho_%DC/experimental/sysupgrade', 'http://[2a03:2260:2342:f251::6]/ffho_%DC/experimental/sysupgrade'},
			},
		},
	},
}