{ -- name of this domain domain_names = { %CO = '%NA', }, -- domain seed domain_seed = '%SE', -- hide this domain hide_domain = %HI, -- v4 and v6 prefixes in which nodes+clients might get an IP prefix4 = '%V4', prefix6 = '2a03:2260:2342:%V6::/64', -- wifi settings (2.4 GHz and 5 GHz) wifi24 = { ap = { ssid = '%SS', }, mesh = { id = 'ffho-mesh-%MI', }, }, wifi5 = { ap = { ssid = '%SS', }, mesh = { id = 'ffho-mesh-%MI', }, }, -- IP address of each router -- At this IP a client can always connect to its -- currently connected node. Both v4 and v6 addr. -- must lie in the above prefix4 and prefix6. next_node = { ip4 = '%N4', ip6 = '2a03:2260:2342:%V6::1', -- mac address, must be unique in the client network -- (usually, you don't need to change this) mac = 'f2:ff:ff:%ID:ff:ff', }, mesh_vpn = { -- fastd (vpn) settings fastd = { groups = { backbone = { -- list all available vpn servers peers = { gw01 = { key = '97bc56ae561f67cfe15364134868c3553b5f1eab06f7bd9c5b93fbf280a52b51', -- remotes is an array of ways on how to reach the VPN server -- Use public addresses here, these addresses are used when the mesh might not be connected yet. -- format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000' remotes = { '"gw01.ffho.net" port 100%ID', 'ipv6 "2001:830:c:9::12" port 100%ID', 'ipv4 "80.242.130.70" port 100%ID', }, }, gw02 = { key = 'e8fa9bf402fd33dd1ba804a97f2e46c704423ff49e9c55312845a7bfb93121ad', remotes = { '"gw02.ffho.net" port 100%ID', 'ipv6 "2a01:4f8:190:6500::18:1" port 100%ID', 'ipv4 "78.46.242.24" port 100%ID', }, }, gw03 = { key = '629b2742922f068ef49558283aea4b75c1427d8cdd3fcd2dbd7c00880547d3b3', remotes = { '"gw03.ffho.net" port 100%ID', 'ipv6 "2a00:13c8:1000:2::165" port 100%ID', 'ipv4 "185.46.137.165" port 100%ID', }, }, gw04 = { key = 'cf3855e5fa04e4c04a294cb6e8902f91c7ff7ef82bf031cc842a2b79b936677c', remotes = { '"gw04.ffho.net" port 100%ID', 'ipv6 "2a02:450:1::22" port 100%ID', 'ipv4 "80.70.181.63" port 100%ID', }, }, gw05 = { key = 'd0d32a2f536a0fc1f0c848e6da15bd96851d5ff4fdf9239c830bab033ddcec1a', remotes = { '"gw05.ffho.net" port 100%ID', 'ipv6 "2001:638:502:1884::ff15" port 100%ID', 'ipv4 "192.26.175.183" port 100%ID', }, }, gw06 = { key = '88b570c4cc811259b7c4106943098c9bee1126d692ddacedd23cd48efc28b0bf', remotes = { '"gw06.ffho.net" port 100%ID', }, }, }, }, }, }, }, -- configure the autoupdater autoupdater = { -- available branches for the autoupdater branches = { stable = { mirrors = {'http://firmware.srv.in.ffho.net/%CO/stable/sysupgrade', 'http://[2a03:2260:2342:f251::6]/%CO/stable/sysupgrade'}, }, testing = { mirrors = {'http://firmware.srv.in.ffho.net/%CO/testing/sysupgrade', 'http://[2a03:2260:2342:f251::6]/%CO/testing/sysupgrade'}, }, experimental = { mirrors = {'http://firmware.srv.in.ffho.net/%CO/experimental/sysupgrade', 'http://[2a03:2260:2342:f251::6]/%CO/experimental/sysupgrade'}, }, }, }, }