fixed comment char in site.conf

site.conf

@@ -1,34 +1,34 @@
 {
-	// A new node's name will be autogenerated from
-	// it's primary MAC address and this prefix.
-	// e.g. freifunk-0123456789ab
+	# A new node's name will be autogenerated from
+	# it's primary MAC address and this prefix.
+	# e.g. freifunk-0123456789ab
 	hostname_prefix => 'freifunk',
 
-	// name of this community
+	# name of this community
 	site_name => 'Freifunk Paderborn',
-	// short name of this community
+	# short name of this community
 	site_code => 'ffpb',
 
-	// firmware release (use "'.nightly" to include current date)
+	# firmware release (use "'.nightly" to include current date)
 	release => '0.4~beta2',
 
-	// v4 and v6 prefixes in which nodes+clients might get an IP
+	# v4 and v6 prefixes in which nodes+clients might get an IP
 	prefix4 => '10.132.0.0/16',
 	prefix6 => 'fdca:ffee:ff12:132::/64',
 
-	// timezone
+	# timezone
 	timezone => 'CET-1CEST,M3.5.0,M10.5.0/3', # Europe/Berlin
 
-	// network-internal ntp service
+	# network-internal ntp service
 	ntp_servers => ['ntp.services.ffpb'],
 
-	// regulatory domain of your wifi
+	# regulatory domain of your wifi
 	regdom => 'DE',
 
-	// wifi settings (2.4 GHz and 5 GHz)
-	// the most important thing to change is the SSID
-	// of the client network (yourcity.freifunk.net) and
-	// both(!) mesh_?ssid ad-hoc mesh network ids.
+	# wifi settings (2.4 GHz and 5 GHz)
+	# the most important thing to change is the SSID
+	# of the client network (yourcity.freifunk.net) and
+	# both(!) mesh_?ssid ad-hoc mesh network ids.
 	wifi24 => {
 		ssid => 'paderborn.freifunk.net',
 		channel => 1,
@@ -46,41 +46,41 @@
 		mesh_mcast_rate => 12000,
 	},
 
-	// IP address of each router
-	// At this IP a client can always connect to its
-	// currently connected node. Both v4 and v6 addr.
-	// must lie in the above prefix4 and prefix6.
+	# IP address of each router
+	# At this IP a client can always connect to its
+	# currently connected node. Both v4 and v6 addr.
+	# must lie in the above prefix4 and prefix6.
 	next_node => {
 		ip4 => '10.132.0.1',
 		ip6 => 'fdca:ffee:ff12:132::1',
 
-		// mac address, must be unique in the client network
-		// (usually, you don't need to change this)
+		# mac address, must be unique in the client network
+		# (usually, you don't need to change this)
 		mac => '16:41:95:40:f7:dc',
 	},
 
-	// fastd (vpn) settings
+	# fastd (vpn) settings
 	fastd_mesh_vpn => {
-		// cipher(s) to use
+		# cipher(s) to use
 		methods => ['salsa2012+gmac'],
 
-		// the maximum transfer unit
-		// use 1426 for IPv4 gateways
+		# the maximum transfer unit
+		# use 1426 for IPv4 gateways
 		mtu => 1426,
 
 		backbone => {
-			// specifies how many servers are contacted
-			// by a client simultanously
+			# specifies how many servers are contacted
+			# by a client simultanously
 			limit => 2,
 
-			// list all available vpn servers
+			# list all available vpn servers
 			peers => {
 				gw01 => {
-					// public fastd key of the vpn server
+					# public fastd key of the vpn server
 					key => '97bc56ae561f67cfe15364134868c3553b5f1eab06f7bd9c5b93fbf280a52b51',
-					// remotes is an array of ways on how to reach the VPN server
-					// Use public addresses here, these addresses are used when the mesh might not be connected yet.
-					// format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000'
+					# remotes is an array of ways on how to reach the VPN server
+					# Use public addresses here, these addresses are used when the mesh might not be connected yet.
+					# format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000'
 					remotes => ['ipv6 "gw01.paderborn.freifunk.net" port 10000', 'ipv4 "gw01.paderborn.freifunk.net" port 10000'],
 				},
 				gw02 => {
@@ -91,33 +91,33 @@
 		},
 	},
 
-	// configure the autoupdater
+	# configure the autoupdater
 	autoupdater => {
 		enabled => 1,
 
-		// default branch for a firmware
-		// In config-mode, the user can select a different branch from below
+		# default branch for a firmware
+		# In config-mode, the user can select a different branch from below
 		branch => 'stable',
 
-		// available branches for the autoupdater
+		# available branches for the autoupdater
 		branches => {
 			stable => {
-				// visible name of this branch (why not use the internal identifier here, too)
+				# visible name of this branch (why not use the internal identifier here, too)
 				name => 'stable',
 
-				// where to get the manifest file (without the trailing /manifest)
-				// It's wise to use an internal address here,
-				// but specifying a publicly available update site does not hurt.
+				# where to get the manifest file (without the trailing /manifest)
+				# It's wise to use an internal address here,
+				# but specifying a publicly available update site does not hurt.
 				mirrors => ['http://[fdca:ffee:ff12:132:1::42]/stable','http://firmware.paderborn.freifunk.net/stable'],
-				// A node rolls the dice once per hour - with
-				// this probably the dice says "go check if there is new firmware"
-				// A value of 8% (0.08) means that we estimate a update check every 12-13 hours (100/8=12.5).
+				# A node rolls the dice once per hour - with
+				# this probably the dice says "go check if there is new firmware"
+				# A value of 8% (0.08) means that we estimate a update check every 12-13 hours (100/8=12.5).
 				probability => 0.08,
 
-				// Number of valid manifest signatures necessary to accept the manifest as "good".
+				# Number of valid manifest signatures necessary to accept the manifest as "good".
 				good_signatures => 2,
 
-				// list of public keys which are considered "good" for manifest signatures
+				# list of public keys which are considered "good" for manifest signatures
 				pubkeys => [
 					'16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', # HeJ
 					'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', # thardes2
@@ -138,7 +138,7 @@
 		},
 	},
 
-	// default traffic shaping (bandwidth limit) settings
+	# default traffic shaping (bandwidth limit) settings
 	simple_tc => {
 		mesh_vpn => {
 			ifname => 'mesh-vpn',
@@ -148,7 +148,7 @@
 		},
 	},
 
-	// custom messages in config mode
+	# custom messages in config mode
 	config_mode => {
 		msg_welcome => <<'END',
 Willkommen zum Einrichtungsassistenten für deinen neuen Paderborner