| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- Gluon 2016.2.2
- ==============
- Added hardware support
- ~~~~~~~~~~~~~~~~~~~~~~
- ar71xx-generic
- ^^^^^^^^^^^^^^
- * TP-Link
- - CPE210/510 EU/US versions
- - TL-WA801N/ND v3
- - TL-WR841ND v11 EU/US versions
- Bugfixes
- ~~~~~~~~
- * Fix boot on certain QCA955x-based devices (e.g. OpenMesh OM5P AC v2) (`#965 <https://github.com/freifunk-gluon/gluon/pull/965>`_)
- This issue was a regression in Gluon v2016.2.1.
- * Build: Fix git downloads from git.kernel.org on Debian Wheezy (`#919 <https://github.com/freifunk-gluon/gluon/issues/919>`_)
- We've switched back from HTTPS to the git protocol for now to avoid using
- the old GnuTLS version of Debian Wheezy which can't establish a HTTPS connection
- with git.kernel.org anymore.
- This issue was a regression in Gluon v2016.2.
- * Fix RX filter of Ubiquiti UAP Outdoor+ (`d43147a8e03d <https://github.com/freifunk-gluon/gluon/commit/d43147a8e03dd17bc27e4ab203736f2151f9db3d>`_)
- This issue was a regression in Gluon v2016.2.
- * Fix switched WAN/LAN interface assignment on CPE210 (`59deb2064d54 <https://github.com/freifunk-gluon/gluon/commit/59deb2064d54a37e27139b76a3b6064f5f10f364>`_)
- This issue was a regression in Gluon v2016.2.
- * Significantly reduce CPU load used by signal strength LEDs (`#897 <https://github.com/freifunk-gluon/gluon/issues/897>`_)
- * Fix ethernet port of the Ubiquiti UAP AC Lite (`#911 <https://github.com/freifunk-gluon/gluon/issues/911>`_)
- * Build: Don't use host ``/tmp`` directory (`f9072a36411b <https://github.com/freifunk-gluon/gluon/commit/f9072a36411b92089c697b2c0a564155bfe10bd1>`_)
- Fixes build when ``/tmp`` is mounted with *noexec*.
- * Fix mesh interface type respondd/alfred announcements when using VLANs over IBSS (`#941 <https://github.com/freifunk-gluon/gluon/issues/941>`_)
- * Fix next-node ebtables rules without *next_node.ip4* (`9dbe9f785d2b <https://github.com/freifunk-gluon/gluon/commit/9dbe9f785d2b439c3ebdae365b808ebf42b3cf03>`_)
- Gluon v2016.2 added support for using the next-node feature without specifying an IPv4
- address. Some scripts had not been adjusted, making the next-node unreliable when
- no IPv4 address was specified.
- Other changes
- ~~~~~~~~~~~~~
- * x86-generic and x86-64 images now have PATA and MMC support to allow using them
- on various devices that were previously unsupported.
- * Clean up opkg postinst scripts up on image generation
- OpenWrt does this by default to save a little space.
- Known Issues
- ~~~~~~~~~~~~
- * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
- Reducing the TX power in the Advanced Settings is recommended.
- * The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
- This may lead to issues in environments where a fixed MAC address is expected (like VMware when promicious mode is disallowed).
- * Inconsistent respondd API (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
- The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while.
|
