123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657 |
- From: Matthias Schiffer <mschiffer@universe-factory.net>
- Date: Thu, 6 Aug 2015 03:01:38 +0200
- Subject: ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)
- The initialization routines for these boards were relying on some (wrong)
- defaults for the QCA953x ethernet. Make these defaults explicit to prevent
- breaking them when the QCA953x defaults are fixed.
- Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
- index c28afc6..3e5c2a2 100644
- --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
- +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
- @@ -109,12 +109,18 @@ static void __init tl_ap143_setup(void)
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- + ath79_eth1_data.duplex = DUPLEX_FULL;
- + ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- + ath79_eth0_data.duplex = DUPLEX_FULL;
- + ath79_eth0_data.speed = SPEED_100;
- + ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
- index bc13d70..e665a2e 100644
- --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
- +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
- @@ -105,12 +105,19 @@ static void __init common_setup(void)
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- + ath79_eth0_data.duplex = DUPLEX_FULL;
- + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- + ath79_eth0_data.speed = SPEED_100;
- + ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- + ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- + ath79_eth1_data.speed = SPEED_100;
- + ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_register_eth(1);
-
|