12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
- Date: Wed, 23 Mar 2016 12:52:12 +0000
- Subject: ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR1750
- The MR1750 must unset some bits in ETH_CFG which were set by u-boot to work
- correctly under OpenWrt. But the global function
- ath79_setup_qca955x_eth_cfg will not unset all of them to increase the
- backward compatiblity with older mach-* files. A private (simplified)
- version for MR1750 can be used instead.
- Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
- Backport of r49070
- Forwarded: https://patchwork.ozlabs.org/patch/624188/
- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
- index f9e45bd..e3c04e7 100644
- --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
- +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
- @@ -108,6 +108,28 @@ static struct mdio_board_info mr1750_mdio0_info[] = {
- },
- };
-
- +static void __init mr1750_setup_qca955x_eth_cfg(u32 mask,
- + unsigned int rxd,
- + unsigned int rxdv,
- + unsigned int txd,
- + unsigned int txe)
- +{
- + void __iomem *base;
- + u32 t;
- +
- + base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
- +
- + t = mask;
- + t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- + t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- + t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- + t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
- +
- + __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
- +
- + iounmap(base);
- +}
- +
- static void __init mr1750_setup(void)
- {
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- @@ -129,7 +151,7 @@ static void __init mr1750_setup(void)
- ath79_register_wmac(art + MR1750_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
-
- - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
- + mr1750_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(mr1750_mdio0_info,
|