gluon/patches/openwrt/0006-mac80211-backport-from-trunk-r47249.patch

From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Tue, 23 Dec 2014 18:57:16 +0100
Subject: mac80211: backport from trunk r47249

diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index a1eedce..f332cbd 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2015-03-09
-PKG_RELEASE:=3
+PKG_VERSION:=2015-07-21
+PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 PKG_BACKPORT_VERSION:=
-PKG_MD5SUM:=6d4b04e4ce8a1f54dabfb04f4709453c
+PKG_MD5SUM:=ec529acfb9c942daf8116e5cff47c999
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@@ -23,15 +23,28 @@ PKG_BUILD_PARALLEL:=1
 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 
 PKG_DRIVERS = \
-	adm8211 ath5k libertas-usb libertas-sdio p54-common p54-pci p54-usb p54-spi \
-	rt2x00-lib rt2x00-pci rt2x00-usb rt2800-lib rt2400-pci rt2500-pci \
-	rt2500-usb rt61-pci rt73-usb rt2800-mmio rt2800-pci rt2800-usb rt2800-soc \
-	rtl8180 rtl8187 zd1211rw mac80211-hwsim carl9170 b43 b43legacy \
-	ath9k-common ath9k ath9k-htc ath10k ath net-libipw net-ipw2100 net-ipw2200 \
-	mwl8k mwifiex-pcie net-hermes net-hermes-pci net-hermes-plx net-hermes-pcmcia \
-	iwl-legacy iwl3945 iwl4965 iwlagn wlcore wl12xx wl18xx lib80211 \
+	adm8211 \
+	ath ath5k ath9k ath9k-common ath9k-htc ath10k \
+	b43 b43legacy \
+	carl9170 \
+	hermes hermes-pci hermes-pcmcia hermes-plx\
+	iwl-legacy iwl3945 iwl4965 iwlwifi \
+	lib80211 \
+	libipw ipw2100 ipw2200 \
+	libertas-sdio libertas-usb \
+	mac80211-hwsim \
+	mt7601u \
+	mwl8k mwifiex-pcie \
+	p54-common p54-pci p54-spi p54-usb \
+	rt2x00-lib rt2x00-pci rt2x00-usb \
+	rt2400-pci rt2500-pci rt2500-usb \
+	rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \
+	rt61-pci rt73-usb \
+	rtl8180 rtl8187 \
 	rtlwifi rtlwifi-pci rtlwifi-usb rtl8192c-common rtl8192ce rtl8192se \
-	rtl8192de rtl8192cu
+	rtl8192de rtl8192cu \
+	wlcore wl12xx wl18xx \
+	zd1211rw
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_kmod-mac80211 \
@@ -60,7 +73,6 @@ define KernelPackage/mac80211/Default
   SUBMENU:=$(WMENU)
   URL:=https://wireless.wiki.kernel.org/
   MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-  DEPENDS:=@!TARGET_uml
 endef
 
 define KernelPackage/cfg80211
@@ -79,7 +91,7 @@ endef
 define KernelPackage/mac80211
   $(call KernelPackage/mac80211/Default)
   TITLE:=Linux 802.11 Wireless Networking Stack
-  DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211 +hostapd-common
+  DEPENDS+= +kmod-cfg80211 +hostapd-common
   KCONFIG:=\
 	CONFIG_AVERAGE=y
   FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko
@@ -109,8 +121,8 @@ Generic IEEE 802.11 Networking Stack (mac80211)
 endef
 
 PKG_LINUX_FIRMWARE_NAME:=linux-firmware
-PKG_LINUX_FIRMWARE_VERSION:=f404336ba808cbd57547196e13367079a23b822c
-PKG_LINUX_FIRMWARE_SOURCE:=$(PKG_LINUX_FIRMWARE_NAME)-2015-03-20-$(PKG_LINUX_FIRMWARE_VERSION).tar.bz2
+PKG_LINUX_FIRMWARE_VERSION:=6ebf5d57d9f6d0cf05558baef1af2b90a3fe98ed
+PKG_LINUX_FIRMWARE_SOURCE:=$(PKG_LINUX_FIRMWARE_NAME)-2015-09-03-$(PKG_LINUX_FIRMWARE_VERSION).tar.xz
 PKG_LINUX_FIRMWARE_PROTO:=git
 PKG_LINUX_FIRMWARE_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
 PKG_LINUX_FIRMWARE_SUBDIR:=$(PKG_LINUX_FIRMWARE_NAME)-$(PKG_LINUX_FIRMWARE_VERSION)
@@ -127,723 +139,769 @@ define Download/linux-firmware
 endef
 $(eval $(call Download,linux-firmware))
 
-PKG_ATH10K_LINUX_FIRMWARE_NAME:=ath10k-firmware
-PKG_ATH10K_LINUX_FIRMWARE_VERSION:=da0f85d924226ee30c46e037120621c9e192b39e
-PKG_ATH10K_LINUX_FIRMWARE_SOURCE:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION).tar.bz2
-PKG_ATH10K_LINUX_FIRMWARE_PROTO:=git
-PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
-PKG_ATH10K_LINUX_FIRMWARE_SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
-#PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM:=?
 
-define Download/ath10k-firmware
-  FILE:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
-  URL:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL)
-  PROTO:=$(PKG_ATH10K_LINUX_FIRMWARE_PROTO)
-  VERSION:=$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
-  SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)
-  #MIRROR_MD5SUM:=$(PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM)
+define KernelPackage/adm8211
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=ADMTek 8211 support
+  DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko
+  AUTOLOAD:=$(call AutoProbe,adm8211)
 endef
-$(eval $(call Download,ath10k-firmware))
 
-# Prism54 drivers
-P54PCIFW:=2.13.12.0.arm
-P54USBFW:=2.13.24.0.lm87.arm
-P54SPIFW:=2.13.0.0.a.13.14.arm
+define KernelPackage/ath/config
+  if PACKAGE_kmod-ath
+	config ATH_USER_REGD
+		bool "Force Atheros drivers to respect the user's regdomain settings"
+		help
+		  Atheros' idea of regulatory handling is that the EEPROM of the card defines
+		  the regulatory limits and the user is only allowed to restrict the settings
+		  even further, even if the country allows frequencies or power levels that
+		  are forbidden by the EEPROM settings.
 
-define Download/p54usb
-  FILE:=$(P54USBFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb
-  MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6
-endef
-$(eval $(call Download,p54usb))
+		  Select this option if you want the driver to respect the user's decision about
+		  regulatory settings.
 
-define Download/p54pci
-  FILE:=$(P54PCIFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac
-  MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4
-endef
-$(eval $(call Download,p54pci))
+	config PACKAGE_ATH_DEBUG
+		bool "Atheros wireless debugging"
+		help
+		  Say Y, if you want to debug atheros wireless drivers.
+		  Only ath9k & ath10k make use of this.
 
-define Download/p54spi
-  FILE:=$(P54SPIFW)
-  URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560
-  MD5SUM:=42661f8ecbadd88012807493f596081d
-endef
-$(eval $(call Download,p54spi))
+	config PACKAGE_ATH_DFS
+		bool "Enable DFS support"
+		default y
+		help
+		  Dynamic frequency selection (DFS) is required for most of the 5 GHz band
+		  channels in Europe, US, and Japan.
 
-define KernelPackage/p54/Default
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Prism54 Drivers
-endef
+		  Select this option if you want to use such channels.
 
-define KernelPackage/p54/description
-  Kernel module for Prism54 chipsets (mac80211)
+  endif
 endef
 
-define KernelPackage/p54-common
-  $(call KernelPackage/p54/Default)
-  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
-  TITLE+= (COMMON)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko
+define KernelPackage/ath
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros common driver part
+  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
+  MENU:=1
 endef
 
-define KernelPackage/p54-pci
-  $(call KernelPackage/p54/Default)
-  TITLE+= (PCI)
-  DEPENDS+= @PCI_SUPPORT +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko
-  AUTOLOAD:=$(call AutoProbe,p54pci)
+define KernelPackage/ath/description
+ This module contains some common parts needed by Atheros Wireless drivers.
 endef
 
-define KernelPackage/p54-usb
-  $(call KernelPackage/p54/Default)
-  TITLE+= (USB)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko
-  AUTOLOAD:=$(call AutoProbe,p54usb)
+define KernelPackage/ath5k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 5xxx wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
+  DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
+  AUTOLOAD:=$(call AutoProbe,ath5k)
 endef
 
-define KernelPackage/p54-spi
-  $(call KernelPackage/p54/Default)
-  TITLE+= (SPI)
-  DEPENDS+= @TARGET_omap24xx +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko
-  AUTOLOAD:=$(call AutoProbe,p54spi)
+define KernelPackage/ath5k/description
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
 endef
 
-define KernelPackage/rt2x00/Default
+define KernelPackage/ath9k-common
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Ralink Drivers for RT2x00 cards
+  TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
 endef
 
-define KernelPackage/rt2x00-lib
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
-  TITLE+= (LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko
-  MENU:=1
+define KernelPackage/ath9k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11n PCI wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
+  AUTOLOAD:=$(call AutoProbe,ath9k)
 endef
 
-define KernelPackage/rt2x00-lib/config
-  if PACKAGE_kmod-rt2x00-lib
-
-	config PACKAGE_RT2X00_LIB_DEBUGFS
-		bool "Enable rt2x00 debugfs support"
-		depends on PACKAGE_MAC80211_DEBUGFS
-		help
-		  Enable creation of debugfs files for the rt2x00 drivers.
-		  These debugfs files support both reading and writing of the
-		  most important register types of the rt2x00 hardware.
-
-	config PACKAGE_RT2X00_DEBUG
-		bool "Enable rt2x00 debug output"
-		help
-		  Enable debugging output for all rt2x00 modules
-
-  endif
+define KernelPackage/ath9k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
 endef
 
-define KernelPackage/rt2x00-mmio
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
-  HIDDEN:=1
-  TITLE+= (MMIO)
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko
-endef
+define KernelPackage/ath9k/config
 
-define KernelPackage/rt2x00-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
-  HIDDEN:=1
-  TITLE+= (PCI)
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2x00pci)
-endef
+	config ATH9K_SUPPORT_PCOEM
+		bool "Support chips used in PC OEM cards"
+		depends on PACKAGE_kmod-ath9k
 
-define KernelPackage/rt2x00-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
-  HIDDEN:=1
-  TITLE+= (USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2x00usb)
 endef
 
-define KernelPackage/rt2800-lib
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
-  HIDDEN:=1
-  TITLE+= (rt2800 LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko
+define KernelPackage/ath9k-htc
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11n USB device support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+  DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
+  AUTOLOAD:=$(call AutoProbe,ath9k_htc)
 endef
 
-define KernelPackage/rt2400-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2400 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2400pci)
+define KernelPackage/ath9k-htc/description
+This module adds support for wireless adapters based on
+Atheros USB AR9271 and AR7010 family of chipsets.
 endef
 
-define KernelPackage/rt2500-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2500 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2500pci)
+define KernelPackage/ath10k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Atheros 802.11ac wireless cards support
+  URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
+  DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
+  AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci)
 endef
 
-define KernelPackage/rt2500-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
-  TITLE+= (RT2500 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2500usb)
+define KernelPackage/ath10k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11ac family of chipsets. For now only
+PCI is supported.
 endef
 
-define KernelPackage/rt61-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
-  TITLE+= (RT2x61 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt61pci)
-endef
+PKG_ATH10K_LINUX_FIRMWARE_NAME:=ath10k-firmware
+PKG_ATH10K_LINUX_FIRMWARE_VERSION:=b46f3e01a6c1f9150fb4612ef53611d714565842
+PKG_ATH10K_LINUX_FIRMWARE_SOURCE:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION).tar.bz2
+PKG_ATH10K_LINUX_FIRMWARE_PROTO:=git
+PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
+PKG_ATH10K_LINUX_FIRMWARE_SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
+#PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM:=?
 
-define KernelPackage/rt73-usb
-  $(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
-  TITLE+= (RT73 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt73usb)
+define Download/ath10k-firmware
+  FILE:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
+  URL:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL)
+  PROTO:=$(PKG_ATH10K_LINUX_FIRMWARE_PROTO)
+  VERSION:=$(PKG_ATH10K_LINUX_FIRMWARE_VERSION)
+  SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)
+  #MIRROR_MD5SUM:=$(PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM)
 endef
+$(eval $(call Download,ath10k-firmware))
 
-define KernelPackage/rt2800-mmio
-$(call KernelPackage/rt2x00/Default)
-  TITLE += (RT28xx/RT3xxx MMIO)
-  DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
-  HIDDEN:=1
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800mmio.ko
-endef
 
-define KernelPackage/rt2800-soc
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
-  TITLE += (RT28xx/RT3xxx SoC)
-  FILES := \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800soc.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800soc)
-endef
+#Broadcom firmware
+ifneq ($(CONFIG_B43_FW_6_30),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=6.30.163.46
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+  PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d
+else
+ifneq ($(CONFIG_B43_FW_5_10),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.10.56.27.3
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac
+else
+ifneq ($(CONFIG_B43_FW_4_178),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=4.178.10.4
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
+else
+ifneq ($(CONFIG_B43_FW_5_100_138),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.100.138
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+  PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+else
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=4.150.10.5
+  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
+  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+  PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
+endif
+endif
+endif
+endif
+ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+  PKG_B43_FWV4_NAME:=broadcom-wl
+  PKG_B43_FWV4_VERSION:=5.2
+  PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
+  PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
+  PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/
+  PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa
+endif
 
-define KernelPackage/rt2800-pci
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio
-  TITLE+= (RT2860 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800pci)
+
+PKG_B43_FWV3_NAME:=wl_apsta
+PKG_B43_FWV3_VERSION:=3.130.20.0
+PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
+PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
+PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
+
+define Download/b43
+  FILE:=$(PKG_B43_FWV4_SOURCE)
+  URL:=$(PKG_B43_FWV4_SOURCE_URL)
+  MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
 endef
+$(eval $(call Download,b43))
 
-define KernelPackage/rt2800-usb
-$(call KernelPackage/rt2x00/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt
-  TITLE+= (RT2870 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko
-  AUTOLOAD:=$(call AutoProbe,rt2800usb)
+define Download/b43legacy
+  FILE:=$(PKG_B43_FWV3_SOURCE)
+  URL:=$(PKG_B43_FWV3_SOURCE_URL)
+  MD5SUM:=$(PKG_B43_FWV3_MD5SUM)
 endef
+$(eval $(call Download,b43legacy))
 
-define KernelPackage/rtl818x/Default
+
+define KernelPackage/b43
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek Drivers for RTL818x devices
-  URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187
-  DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211
+  TITLE:=Broadcom 43xx wireless support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+  KCONFIG:= \
+  	CONFIG_HW_RANDOM=y
+  # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
+  DEPENDS += \
+	@PCI_SUPPORT +kmod-mac80211 \
+	$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
+	$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
+  AUTOLOAD:=$(call AutoProbe,b43)
+  MENU:=1
 endef
 
-define KernelPackage/rtl8180
-  $(call KernelPackage/rtl818x/Default)
-  DEPENDS+= @PCI_SUPPORT
-  TITLE+= (RTL8180 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180/rtl818x_pci.ko
-  AUTOLOAD:=$(call AutoProbe,rtl818x_pci)
-endef
+define KernelPackage/b43/config
 
-define KernelPackage/rtl8187
-$(call KernelPackage/rtl818x/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core
-  TITLE+= (RTL8187 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8187)
-endef
+config PACKAGE_B43_USE_SSB
+	select PACKAGE_kmod-ssb
+	tristate
+	depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 
-define KernelPackage/rtlwifi/config
-	config PACKAGE_RTLWIFI_DEBUG
-		bool "Realtek wireless debugging"
-		depends on PACKAGE_kmod-rtlwifi
+config PACKAGE_B43_USE_BCMA
+	select PACKAGE_kmod-bcma
+	tristate
+	depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
+
+  if PACKAGE_kmod-b43
+
+	choice
+		prompt "b43 firmware version"
+		default B43_FW_5_100_138
 		help
-		  Say Y, if you want to debug realtek wireless drivers.
+		  This option allows you to select the version of the b43 firmware.
 
-endef
+	config B43_FW_4_150
+		bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
+		help
+		  Old stable firmware for BCM43xx devices.
 
-define KernelPackage/rtlwifi
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part
-  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtlwifi.ko
-  HIDDEN:=1
-endef
+		  If unsure, select this.
 
-define KernelPackage/rtlwifi-pci
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part (PCI support)
-  DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_pci.ko
-  AUTOLOAD:=$(call AutoProbe,rtl_pci)
-  HIDDEN:=1
-endef
+	config B43_FW_4_178
+		bool "Firmware 478.104 from driver 4.178.10.4"
+		help
+		  Older firmware for BCM43xx devices.
 
-define KernelPackage/rtlwifi-usb
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek common driver part (USB support)
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_usb.ko
-  AUTOLOAD:=$(call AutoProbe,rtl_usb)
-  HIDDEN:=1
-endef
+		  If unsure, select the "stable" firmware.
 
-define KernelPackage/rtl8192c-common
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CE/RTL8192CU common support module
-  DEPENDS+= +kmod-rtlwifi
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
-  HIDDEN:=1
-endef
+	config B43_FW_5_10
+		bool "Firmware 508.1084 from driver 5.10.56.27"
+		help
+		  Older firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192ce
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CE/RTL8188CE support
-  DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192ce)
-endef
+		  If unsure, select the "stable" firmware.
 
-define KernelPackage/rtl8192ce/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfw.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU_B.bin $(1)/lib/firmware/rtlwifi
-endef
+	config B43_FW_5_100_138
+		bool "Firmware 666.2 from driver 5.100.138 (stable)"
+		help
+		  The currently default firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192se
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192SE/RTL8191SE support
-  DEPENDS+= +kmod-rtlwifi-pci
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192se)
-endef
+		  This firmware currently gets most of the testing and is needed for some N-PHY devices.
 
-define KernelPackage/rtl8192se/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi
-endef
+		  If unsure, select the this firmware.
 
-define KernelPackage/rtl8192de
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192DE/RTL8188DE support
-  DEPENDS+= +kmod-rtlwifi-pci
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192de)
-endef
+	config B43_FW_6_30
+		bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
+		help
+		  Newer experimental firmware for BCM43xx devices.
 
-define KernelPackage/rtl8192de/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi
-endef
+		  This firmware is mostly untested.
 
-define KernelPackage/rtl8192cu
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Realtek RTL8192CU/RTL8188CU support
-  DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common
-  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko
-  AUTOLOAD:=$(call AutoProbe,rtl8192cu)
-endef
+		  If unsure, select the "stable" firmware.
 
-define KernelPackage/rtl8192cu/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_A.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_B.bin $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_TMSC.bin $(1)/lib/firmware/rtlwifi
-endef
+	config B43_OPENFIRMWARE
+		bool "Open FirmWare for WiFi networks"
+		help
+		  Opensource firmware for BCM43xx devices.
 
-ZD1211FW_NAME:=zd1211-firmware
-ZD1211FW_VERSION:=1.4
-define Download/zd1211rw
-  FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
-  URL:=@SF/zd1211/
-  MD5SUM:=19f28781d76569af8551c9d11294c870
-endef
-$(eval $(call Download,zd1211rw))
+		  Do _not_ select this, unless you know what you are doing.
+		  The Opensource firmware is not suitable for embedded devices, yet.
+		  It does not support QoS, which is bad for AccessPoints.
+		  It does not support hardware crypto acceleration, which is a showstopper
+		  for embedded devices with low CPU resources.
 
-define KernelPackage/zd1211rw
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Zydas ZD1211 support
-  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko
-  AUTOLOAD:=$(call AutoProbe,zd1211rw)
-endef
+		  If unsure, select the "stable" firmware.
 
-define KernelPackage/adm8211
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=ADMTek 8211 support
-  DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko
-  AUTOLOAD:=$(call AutoProbe,adm8211)
-endef
+	endchoice
+
+	config B43_FW_SQUASH
+		bool "Remove unnecessary firmware files"
+		depends on !B43_OPENFIRMWARE
+		default y
+		help
+		  This options allows you to remove unnecessary b43 firmware files
+		  from the final rootfs image. This can reduce the rootfs size by
+		  up to 200k.
+
+		  If unsure, say Y.
+
+	config B43_FW_SQUASH_COREREVS
+		string "Core revisions to include"
+		depends on B43_FW_SQUASH
+		default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
+		default "16,28,29,30" if TARGET_brcm47xx_mips74k
+		default "5,6,7,8,9,10,11,13,15,16,28,29,30"
+		help
+		  This is a comma seperated list of core revision numbers.
+
+		  Example (keep files for rev5 only):
+		    5
+
+		  Example (keep files for rev5 and rev11):
+		    5,11
+
+	config B43_FW_SQUASH_PHYTYPES
+		string "PHY types to include"
+		depends on B43_FW_SQUASH
+		default "G,N,LP" if TARGET_brcm47xx_legacy
+		default "N,HT" if TARGET_brcm47xx_mips74k
+		default "G,N,LP,HT"
+		help
+		  This is a comma seperated list of PHY types:
+		    A  => A-PHY
+		    AG => Dual A-PHY G-PHY
+		    G  => G-PHY
+		    LP => LP-PHY
+		    N  => N-PHY
+		    HT  => HT-PHY
+		    LCN  => LCN-PHY
+		    LCN40  => LCN40-PHY
+		    AC  => AC-PHY
+
+		  Example (keep files for G-PHY only):
+		    G
+
+		  Example (keep files for G-PHY and N-PHY):
+		    G,N
+
+	choice
+		prompt "Supported buses"
+		default PACKAGE_B43_BUSES_BCMA_AND_SSB
+		help
+		  This allows choosing buses that b43 should support.
+
+	config PACKAGE_B43_BUSES_BCMA_AND_SSB
+		depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		bool "BCMA and SSB"
+
+	config PACKAGE_B43_BUSES_BCMA
+		depends on !TARGET_brcm47xx_legacy
+		bool "BCMA only"
+
+	config PACKAGE_B43_BUSES_SSB
+		depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		bool "SSB only"
+
+	endchoice
+
+	config PACKAGE_B43_DEBUG
+		bool "Enable debug output and debugfs for b43"
+		default n
+		help
+		  Enable additional debug output and runtime sanity checks for b43
+		  and enables the debugfs interface.
+
+		  If unsure, say N.
+
+	config PACKAGE_B43_PIO
+		bool "Enable support for PIO transfer mode"
+		default n
+		help
+		  Enable support for using PIO instead of DMA. Unless you have DMA
+		  transfer problems you don't need this.
+
+		  If unsure, say N.
+
+	config PACKAGE_B43_PHY_G
+		bool "Enable support for G-PHYs"
+		default n if TARGET_brcm47xx_mips74k
+		default y
+		help
+		  Enable support for G-PHY. This includes support for the following devices:
+		  PCI: BCM4306, BCM4311, BCM4318
+		  SoC: BCM5352E, BCM4712
 
-define KernelPackage/ath/config
-  if PACKAGE_kmod-ath
-	config ATH_USER_REGD
-		bool "Force Atheros drivers to respect the user's regdomain settings"
+		  If unsure, say Y.
+
+	config PACKAGE_B43_PHY_N
+		bool "Enable support for N-PHYs"
+		default y
 		help
-		  Atheros' idea of regulatory handling is that the EEPROM of the card defines
-		  the regulatory limits and the user is only allowed to restrict the settings
-		  even further, even if the country allows frequencies or power levels that
-		  are forbidden by the EEPROM settings.
+		  Enable support for N-PHY. This includes support for the following devices:
+		  PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
+		  SoC: BCM4716, BCM4717, BCM4718
 
-		  Select this option if you want the driver to respect the user's decision about
-		  regulatory settings.
+		  Currently only 11g speed is available.
 
-	config PACKAGE_ATH_DEBUG
-		bool "Atheros wireless debugging"
+		  If unsure, say Y.
+
+	config PACKAGE_B43_PHY_LP
+		bool "Enable support for LP-PHYs"
+		default n if TARGET_brcm47xx_mips74k
+		default y
 		help
-		  Say Y, if you want to debug atheros wireless drivers.
-		  Right now only ath9k makes use of this.
+		  Enable support for LP-PHY. This includes support for the following devices:
+		  PCI: BCM4312
+		  SoC: BCM5354
 
-	config PACKAGE_ATH_DFS
-		bool "Enable DFS support"
+		  If unsure, say Y.
+
+	config PACKAGE_B43_PHY_HT
+		bool "Enable support for HT-PHYs"
+		default n if TARGET_brcm47xx_legacy
 		default y
 		help
-		  Dynamic frequency selection (DFS) is required for most of the 5 GHz band
-		  channels in Europe, US, and Japan.
+		  Enable support for HT-PHY. This includes support for the following devices:
+		  PCI: BCM4331
 
-		  Select this option if you want to use such channels.
+		  Currently only 11g speed is available.
 
-  endif
-endef
+		  If unsure, say Y.
 
-define KernelPackage/ath
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros common driver part
-  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
-  MENU:=1
-endef
+	config PACKAGE_B43_PHY_LCN
+		bool "Enable support for LCN-PHYs"
+		depends on BROKEN
+		default n
+		help
+		  Currently broken.
 
-define KernelPackage/ath/description
- This module contains some common parts needed by Atheros Wireless drivers.
-endef
+		  If unsure, say N.
 
-define KernelPackage/ath5k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 5xxx wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
-  DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
-  AUTOLOAD:=$(call AutoProbe,ath5k)
+  endif
 endef
 
-define KernelPackage/ath5k/description
- This module adds support for wireless adapters based on
- Atheros 5xxx chipset.
+define KernelPackage/b43/description
+Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
 endef
 
-define KernelPackage/ath9k-common
+define KernelPackage/b43legacy
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@KERNEL_RELAY
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
+  TITLE:=Broadcom 43xx-legacy wireless support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+  KCONFIG:= \
+  	CONFIG_HW_RANDOM=y
+  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
+  AUTOLOAD:=$(call AutoProbe,b43legacy)
+  MENU:=1
 endef
 
-define KernelPackage/ath9k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n PCI wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
-  AUTOLOAD:=$(call AutoProbe,ath9k)
-endef
+define KernelPackage/b43legacy/config
+  if PACKAGE_kmod-b43legacy
 
-define KernelPackage/ath9k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
-endef
+	config B43LEGACY_FW_SQUASH
+		bool "Remove unnecessary firmware files"
+		default y
+		help
+		  This options allows you to remove unnecessary b43legacy firmware files
+		  from the final rootfs image. This can reduce the rootfs size by
+		  up to 50k.
 
-define KernelPackage/ath9k/config
+		  If unsure, say Y.
 
-	config ATH9K_SUPPORT_PCOEM
-		bool "Support chips used in PC OEM cards"
-		depends on PACKAGE_kmod-ath9k
-	
-endef
+	config B43LEGACY_FW_SQUASH_COREREVS
+		string "Core revisions to include"
+		depends on B43LEGACY_FW_SQUASH
+		default "1,2,3,4"
+		help
+		  This is a comma seperated list of core revision numbers.
 
-define KernelPackage/ath9k-htc
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11n USB device support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
-  DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
-  AUTOLOAD:=$(call AutoProbe,ath9k_htc)
+		  Example (keep files for rev4 only):
+		    4
+
+		  Example (keep files for rev2 and rev4):
+		    2,4
+
+  endif
 endef
 
-define KernelPackage/ath9k-htc/description
-This module adds support for wireless adapters based on
-Atheros USB AR9271 and AR7010 family of chipsets.
+define KernelPackage/b43legacy/description
+Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
 endef
 
-define KernelPackage/ath10k
+
+define KernelPackage/brcmutil
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros 802.11ac wireless cards support
-  URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
-  DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
-  AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci)
+  TITLE:=Broadcom IEEE802.11n common driver parts
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
+  AUTOLOAD:=$(call AutoProbe,brcmutil)
+  MENU:=1
 endef
 
-define KernelPackage/ath10k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11ac family of chipsets. For now only
-PCI is supported.
+define KernelPackage/brcmutil/description
+ This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
 endef
 
-define KernelPackage/ath10k/config
-  if PACKAGE_kmod-ath10k
-
-	config ATH10K_STA_FW
-		bool "Firmware optimized for STA operation"
-		default n
-		help
-		  Use the ath10k firmware optimized for wireless client instead
-		  of access point operation.
+define KernelPackage/brcmutil/config
+  if PACKAGE_kmod-brcmutil
 
-	config ATH10K_API2_FW
-		bool "Firmware optimized for AP operation (v10.1 / API v2)"
-		default n
-		depends on !ATH10K_STA_FW
+	config PACKAGE_BRCM80211_DEBUG
+		bool "Broadcom wireless driver debugging"
 		help
-		  Use the ath10k firmware from the 10.1 SDK using API v2 optimized
-		  for access point operation if the default firmware keeps crashing.
+		  Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
 
   endif
 endef
 
-define KernelPackage/carl9170
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Atheros AR9170 USB sticks
-  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
-  AUTOLOAD:=$(call AutoProbe,carl9170)
+PKG_BRCMSMAC_FW_NAME:=broadcom-wl
+PKG_BRCMSMAC_FW_VERSION:=5.100.138
+PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
+PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
+PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+
+define Download/brcmsmac
+  FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
+  URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
+  MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM)
 endef
+$(eval $(call Download,brcmsmac))
 
-define KernelPackage/lib80211
+define KernelPackage/brcmsmac
   $(call KernelPackage/mac80211/Default)
-  TITLE:=802.11 Networking stack
-  DEPENDS:=+kmod-cfg80211
-  FILES:= \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
-	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
-  AUTOLOAD:=$(call AutoProbe, \
-	lib80211 \
-	lib80211_crypt_wep \
-	lib80211_crypt_ccmp \
-	lib80211_crypt_tkip \
-  )
+  TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
+  AUTOLOAD:=$(call AutoProbe,brcmsmac)
+  MENU:=1
 endef
 
-define KernelPackage/lib80211/description
- Kernel modules for 802.11 Networking stack
- Includes:
- - lib80211
- - lib80211_crypt_wep
- - lib80211_crypt_tkip
- - lib80211_crytp_ccmp
+define KernelPackage/brcmsmac/description
+ Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
 endef
 
-define KernelPackage/libertas-usb
-  $(call KernelPackage/mac80211/Default)
-  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT
-  TITLE:=Marvell 88W8015 Wireless Driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
-  AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
-endef
+define KernelPackage/brcmsmac/config
+  if PACKAGE_kmod-brcmsmac
 
-define KernelPackage/libertas-sdio
-  $(call KernelPackage/mac80211/Default)
-  DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml
-  TITLE:=Marvell 88W8686 Wireless Driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
-  AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
+	config BRCMSMAC_USE_FW_FROM_WL
+		bool "Use firmware extracted from broadcom proprietary driver"
+		default y
+		help
+		  Instead of using the official brcmsmac firmware a firmware
+		  version 666.2 extracted from the proprietary Broadcom driver
+		  is used. This is needed to get core rev 17 used in bcm4716
+		  to work.
+
+		  If unsure, say Y.
+
+  endif
 endef
 
-define KernelPackage/mac80211-hwsim
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=mac80211 HW simulation device
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
-  AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
-endef
 
-define KernelPackage/net-libipw
+define KernelPackage/brcmfmac
   $(call KernelPackage/mac80211/Default)
-  TITLE:=libipw for ipw2100 and ipw2200
-  DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
-  AUTOLOAD:=$(call AutoProbe,libipw)
+  TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
+  AUTOLOAD:=$(call AutoProbe,brcmfmac)
 endef
 
-define KernelPackage/net-libipw/description
- Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
+define KernelPackage/brcmfmac/description
+ Kernel module for Broadcom IEEE802.11n USB Wireless cards
 endef
 
-IPW2100_NAME:=ipw2100-fw
-IPW2100_VERSION:=1.3
-
-define Download/net-ipw2100
-  URL:=http://bughost.org/firmware/
-  FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
-  MD5SUM=46aa75bcda1a00efa841f9707bbbd113
-endef
-$(eval $(call Download,net-ipw2100))
+define KernelPackage/brcmfmac/config
+  if PACKAGE_kmod-brcmfmac
 
-define KernelPackage/net-ipw2100
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Intel IPW2100 driver
-  DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
-  AUTOLOAD:=$(call AutoProbe,ipw2100)
-endef
+	config BRCMFMAC_SDIO
+		bool "Enable SDIO bus interface support"
+		default n
+		help
+		  Enable support for cards attached to an SDIO bus.
+		  Select this option only if you are sure that your
+		  board has a Broadcom wireless chip atacched to
+		  that bus.
 
-define KernelPackage/net-ipw2100/description
- Kernel support for Intel IPW2100
- Includes:
- - ipw2100
-endef
+	config BRCMFMAC_USB
+		bool "Enable USB bus interface support"
+		depends on USB_SUPPORT
+		default y
+		help
+		  Supported USB connected chipsets:
+		  BCM43235, BCM43236, BCM43238 (all in revision 3 only)
+		  BCM43143, BCM43242, BCM43566, BCM43569
 
-IPW2200_NAME:=ipw2200-fw
-IPW2200_VERSION:=3.1
+	config BRCMFMAC_PCIE
+		bool "Enable PCIE bus interface support"
+		depends on PCI_SUPPORT
+		default y
+		help
+		  Supported PCIe connected chipsets:
+		  BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
 
-define Download/net-ipw2200
-  URL:=http://bughost.org/firmware/
-  FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
-  MD5SUM=eaba788643c7cc7483dd67ace70f6e99
+  endif
 endef
-$(eval $(call Download,net-ipw2200))
 
-define KernelPackage/net-ipw2200
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Intel IPW2200 driver
-  DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
-  AUTOLOAD:=$(call AutoProbe,ipw2200)
-endef
 
-define KernelPackage/net-ipw2200/description
- Kernel support for Intel IPW2200
- Includes:
- - ipw2200
+define KernelPackage/carl9170
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Atheros AR9170 USB sticks
+  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
+  AUTOLOAD:=$(call AutoProbe,carl9170)
 endef
 
 
-define KernelPackage/net-hermes
+define KernelPackage/hermes
   $(call KernelPackage/mac80211/Default)
   TITLE:=Hermes 802.11b chipset support
-  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko
   AUTOLOAD:=$(call AutoProbe,orinoco)
 endef
 
-define KernelPackage/net-hermes/description
+define KernelPackage/hermes/description
  Kernel support for Hermes 802.11b chipsets
 endef
 
-define KernelPackage/net-hermes-pci
+define KernelPackage/hermes-pci
   $(call KernelPackage/mac80211/Default)
   TITLE:=Intersil Prism 2.5 PCI support
-  DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
+  DEPENDS:=@PCI_SUPPORT +kmod-hermes
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_pci)
 endef
 
-define KernelPackage/net-hermes-pci/description
+define KernelPackage/hermes-pci/description
  Kernel modules for Intersil Prism 2.5 PCI support
 endef
 
-define KernelPackage/net-hermes-plx
+define KernelPackage/hermes-plx
   $(call KernelPackage/mac80211/Default)
   TITLE:=PLX9052 based PCI adaptor
-  DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
+  DEPENDS:=@PCI_SUPPORT +kmod-hermes
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_plx)
 endef
 
-define KernelPackage/net-hermes-plx/description
+define KernelPackage/hermes-plx/description
  Kernel modules for Hermes in PLX9052 based PCI adaptors
 endef
 
-define KernelPackage/net-hermes-pcmcia
+define KernelPackage/hermes-pcmcia
   $(call KernelPackage/mac80211/Default)
   TITLE:=Hermes based PCMCIA adaptors
-  DEPENDS:=@PCMCIA_SUPPORT +kmod-net-hermes @BROKEN
+  DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko
   AUTOLOAD:=$(call AutoProbe,orinoco_cs)
 endef
 
-define KernelPackage/net-hermes-pcmcia/description
+define KernelPackage/hermes-pcmcia/description
  Kernel modules for Hermes based PCMCIA adaptors
 endef
 
-define KernelPackage/iwlagn
+
+define KernelPackage/iwlwifi
   $(call KernelPackage/mac80211/Default)
   DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT
   TITLE:=Intel AGN Wireless support
   FILES:= \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko
-  AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm)
+	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko
+  AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm)
   MENU:=1
 endef
 
-define KernelPackage/iwlagn/description
- iwlagn kernel module for Intel 5000/5150/1000/6000/6050/6005/6030/100 support
-endef
+define KernelPackage/iwlwifi/description
+ iwlwifi kernel module for
+ Intel Wireless WiFi Link 6250AGN Adapter
+ Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+ Intel WiFi Link 1000BGN
+ Intel Wireless WiFi 5150AGN
+ Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+ Intel 6005 Series Wi-Fi Adapters
+ Intel 6030 Series Wi-Fi Adapters
+ Intel Wireless WiFi Link 6150BGN 2 Adapter
+ Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+ Intel 2000 Series Wi-Fi Adapters
+ Intel 7260 Wi-Fi Adapter
+ Intel 3160 Wi-Fi Adapter
+ Intel 7265 Wi-Fi Adapter
+ Intel 8260 Wi-Fi Adapter
+ Intel 3165 Wi-Fi Adapter
+endef
+
+define KernelPackage/iwlwifi/config
+  if PACKAGE_kmod-iwlwifi
+
+	config PACKAGE_IWLWIFI_DEBUG
+		bool "Enable full debugging output in the iwlwifi driver"
+		default n
+		help
+		  This option will enable debug tracing output for the iwlwifi drivers
 
-define KernelPackage/iwlagn/config
-  if PACKAGE_kmod-iwlagn
+		  This will result in the kernel module being ~100k larger.  You can
+		  control which debug output is sent to the kernel log by setting the
+		  value in
 
-	config IWL5000_FW
-		bool "Intel 5000 Firmware"
-		default y
+			/sys/module/iwlwifi/parameters/debug
+
+		  This entry will only exist if this option is enabled.
+
+		  To set a value, simply echo an 8-byte hex value to the same file:
+
+			  % echo 0x43fff > /sys/module/iwlwifi/parameters/debug
+
+		  You can find the list of debug mask values in:
+			  drivers/net/wireless/iwlwifi/iwl-debug.h
+
+		  If this is your first time using this driver, you should say Y here
+		  as the debug information can assist others in helping you resolve
+		  any problems you may encounter.
+
+	config PACKAGE_IWLWIFI_DEBUGFS
+	        bool "iwlwifi debugfs support"
+		depends on PACKAGE_MAC80211_DEBUGFS
+		default n
 		help
-		  Download and install firmware for:
-		    Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+		  Enable creation of debugfs files for the iwlwifi drivers. This
+		  is a low-impact option that allows getting insight into the
+		  driver's state at runtime.
 
-	config IWL5150_FW
-		bool "Intel 5150 Firmware"
+	config IWL100_FW
+		bool "Intel 100 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Wireless WiFi 5150AGN
+		    Intel Centrino Wireless-N 100
 
 	config IWL1000_FW
 		bool "Intel 1000 Firmware"
@@ -852,89 +910,104 @@ define KernelPackage/iwlagn/config
 		  Download and install firmware for:
 		    Intel Centrino Wireless-N 1000
 
-	config IWL6000_FW
-		bool "Intel 6000 Firmware"
+	config IWL105_FW
+		bool "Intel 105 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Ultimate-N 6300 and Advanced-N 6200
+		    Intel Centrino Wireless-N 105
 
-	config IWL6050_FW
-		bool "Intel 6050 Firmware"
+	config IWL135_FW
+		bool "Intel 135 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150
+		    Intel Centrino Wireless-N 135
 
-	config IWL6005_FW
-		bool "Intel 6005 Firmware"
+	config IWL2000_FW
+		bool "Intel 2000 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Advanced-N 6205
+		    Intel Centrino Wireless-N 2200
 
-	config IWL6030_FW
-		bool "Intel 6030 Firmware"
+	config IWL2030_FW
+		bool "Intel 2030 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235
+		    Intel Centrino Wireless-N 2230
 
-	config IWL7260_FW
-		bool "Intel 7260 Firmware"
+	config IWL3160_FW
+		bool "Intel 3160 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260
+		    Intel Wireless WiFi 3160
 
-	config IWL7265_FW
-		bool "Intel 7265 Firmware"
+	config IWL5000_FW
+		bool "Intel 5000 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Wireless 7265
+		    Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
 
-	config IWL100_FW
-		bool "Intel 100 Firmware"
+	config IWL5150_FW
+		bool "Intel 5150 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Wireless-N 100
+		    Intel Wireless WiFi 5150AGN
 
-	config IWL2000_FW
-		bool "Intel 2000 Firmware"
+	config IWL6000_FW
+		bool "Intel 6000 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Wireless-N 2200
+		    Intel Centrino Ultimate-N 6300 and Advanced-N 6200
 
-	config IWL2030_FW
-		bool "Intel 2030 Firmware"
+	config IWL6005_FW
+		bool "Intel 6005 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Wireless-N 2230
+		    Intel Centrino Advanced-N 6205
 
-	config IWL105_FW
-		bool "Intel 105 Firmware"
+	config IWL6030_FW
+		bool "Intel 6030 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Wireless-N 105
+		    Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235
 
-	config IWL135_FW
-		bool "Intel 135 Firmware"
+	config IWL6050_FW
+		bool "Intel 6050 Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Centrino Wireless-N 135
+		    Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150
 
-	config IWL3160_FW
-		bool "Intel 3160 Firmware"
+	config IWL7260_FW
+		bool "Intel 7260 Firmware"
+		default y
+		help
+		  Download and install firmware for:
+		    Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260
+
+	config IWL7265_FW
+		bool "Intel 7265 Firmware"
+		default y
+		help
+		  Download and install firmware for:
+		    Intel Wireless 7265, 7265D, 3165
+
+	config IWL8000_FW
+		bool "Intel 8000 Series Firmware"
 		default y
 		help
 		  Download and install firmware for:
-		    Intel Wireless 3160
+		    Intel Wireless Series 8260, 4165
+
   endif
 endef
 
@@ -953,578 +1026,587 @@ endef
 define KernelPackage/iwl3945
   $(call KernelPackage/mac80211/Default)
   DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy
-  TITLE:=Intel iwl3945 Wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko
-  AUTOLOAD:=$(call AutoProbe,iwl3945)
-endef
-
-define KernelPackage/iwl3945/description
- iwl3945 kernel module for Intel 3945 support
-endef
-
-define KernelPackage/iwl4965
-  $(call KernelPackage/mac80211/Default)
-  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT
-  TITLE:=Intel iwl4965 Wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko
-  AUTOLOAD:=$(call AutoProbe,iwl4965)
-endef
-
-define KernelPackage/iwl4965/description
- iwl4965 kernel module for Intel 4965 support
-endef
-
-
-define KernelPackage/mwl8k
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
-  URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
-  AUTOLOAD:=$(call AutoProbe,mwl8k)
-endef
-
-define KernelPackage/mwl8k/description
- Kernel modules for Marvell TOPDOG 802.11 Wireless cards
-endef
-
-
-define KernelPackage/mwifiex-pcie
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
-  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko
-  AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
-endef
-
-define KernelPackage/mwifiex-pcie/description
- Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
-endef
-
-
-define KernelPackage/wlcore
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=TI common driver part
-  DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
-  AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
-endef
-
-define KernelPackage/wlcore/description
- This module contains some common parts needed by TI Wireless drivers.
-endef
-
-define KernelPackage/wl12xx
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for TI WL12xx
-  URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
-  DEPENDS+= +kmod-wlcore
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
-  AUTOLOAD:=$(call AutoProbe,wl12xx)
+  TITLE:=Intel iwl3945 Wireless support
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko
+  AUTOLOAD:=$(call AutoProbe,iwl3945)
 endef
 
-define KernelPackage/wl12xx/description
- Kernel modules for TI WL12xx
+define KernelPackage/iwl3945/description
+ iwl3945 kernel module for Intel 3945 support
 endef
 
-define KernelPackage/wl18xx
+define KernelPackage/iwl4965
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for TI WL18xx
-  URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
-  DEPENDS+= +kmod-wlcore
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
-  AUTOLOAD:=$(call AutoProbe,wl18xx)
+  DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT
+  TITLE:=Intel iwl4965 Wireless support
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko
+  AUTOLOAD:=$(call AutoProbe,iwl4965)
 endef
 
-define KernelPackage/wl18xx/description
- Kernel modules for TI WL18xx
+define KernelPackage/iwl4965/description
+ iwl4965 kernel module for Intel 4965 support
 endef
 
 
-#Broadcom firmware
-ifneq ($(CONFIG_B43_FW_6_30),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=6.30.163.46
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-  PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d
-else
-ifneq ($(CONFIG_B43_FW_5_10),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.10.56.27.3
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac
-else
-ifneq ($(CONFIG_B43_FW_4_178),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=4.178.10.4
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
-else
-ifneq ($(CONFIG_B43_FW_5_100_138),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.100.138
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-  PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
-else
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=4.150.10.5
-  PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
-  PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
-  PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-  PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
-endif
-endif
-endif
-endif
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
-  PKG_B43_FWV4_NAME:=broadcom-wl
-  PKG_B43_FWV4_VERSION:=5.2
-  PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
-  PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
-  PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/
-  PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa
-endif
-
-
-PKG_B43_FWV3_NAME:=wl_apsta
-PKG_B43_FWV3_VERSION:=3.130.20.0
-PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
-PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
-PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
-
-define Download/b43
-  FILE:=$(PKG_B43_FWV4_SOURCE)
-  URL:=$(PKG_B43_FWV4_SOURCE_URL)
-  MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
+define KernelPackage/lib80211
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=802.11 Networking stack
+  DEPENDS:=+kmod-cfg80211
+  FILES:= \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
+	$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
+  AUTOLOAD:=$(call AutoProbe, \
+	lib80211 \
+	lib80211_crypt_wep \
+	lib80211_crypt_ccmp \
+	lib80211_crypt_tkip \
+  )
 endef
-$(eval $(call Download,b43))
 
-define Download/b43legacy
-  FILE:=$(PKG_B43_FWV3_SOURCE)
-  URL:=$(PKG_B43_FWV3_SOURCE_URL)
-  MD5SUM:=$(PKG_B43_FWV3_MD5SUM)
+define KernelPackage/lib80211/description
+ Kernel modules for 802.11 Networking stack
+ Includes:
+ - lib80211
+ - lib80211_crypt_wep
+ - lib80211_crypt_tkip
+ - lib80211_crytp_ccmp
 endef
-$(eval $(call Download,b43legacy))
 
 
-define KernelPackage/b43
+define KernelPackage/libipw
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom 43xx wireless support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
-  KCONFIG:= \
-  	CONFIG_HW_RANDOM=y
-  # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
-  DEPENDS += \
-	@PCI_SUPPORT +kmod-mac80211 \
-	$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
-	$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
-  AUTOLOAD:=$(call AutoProbe,b43)
-  MENU:=1
+  TITLE:=libipw for ipw2100 and ipw2200
+  DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
+  AUTOLOAD:=$(call AutoProbe,libipw)
 endef
 
-define KernelPackage/b43/config
-
-config PACKAGE_B43_USE_SSB
-	select PACKAGE_kmod-ssb
-	tristate
-	depends on !TARGET_brcm47xx && !TARGET_brcm63xx
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
+define KernelPackage/libipw/description
+ Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
+endef
 
-config PACKAGE_B43_USE_BCMA
-	select PACKAGE_kmod-bcma
-	tristate
-	depends on !TARGET_brcm47xx && !TARGET_bcm53xx
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
-	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
+IPW2100_NAME:=ipw2100-fw
+IPW2100_VERSION:=1.3
 
-  if PACKAGE_kmod-b43
+define Download/ipw2100
+  URL:=http://bughost.org/firmware/
+  FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
+  MD5SUM=46aa75bcda1a00efa841f9707bbbd113
+endef
+$(eval $(call Download,ipw2100))
 
-	choice
-		prompt "b43 firmware version"
-		default B43_FW_5_100_138
-		help
-		  This option allows you to select the version of the b43 firmware.
+define KernelPackage/ipw2100
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Intel IPW2100 driver
+  DEPENDS:=@PCI_SUPPORT +kmod-libipw
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
+  AUTOLOAD:=$(call AutoProbe,ipw2100)
+endef
 
-	config B43_FW_4_150
-		bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
-		help
-		  Old stable firmware for BCM43xx devices.
+define KernelPackage/ipw2100/description
+ Kernel support for Intel IPW2100
+ Includes:
+ - ipw2100
+endef
 
-		  If unsure, select this.
+IPW2200_NAME:=ipw2200-fw
+IPW2200_VERSION:=3.1
 
-	config B43_FW_4_178
-		bool "Firmware 478.104 from driver 4.178.10.4"
-		help
-		  Older firmware for BCM43xx devices.
+define Download/ipw2200
+  URL:=http://bughost.org/firmware/
+  FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
+  MD5SUM=eaba788643c7cc7483dd67ace70f6e99
+endef
+$(eval $(call Download,ipw2200))
 
-		  If unsure, select the "stable" firmware.
+define KernelPackage/ipw2200
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Intel IPW2200 driver
+  DEPENDS:=@PCI_SUPPORT +kmod-libipw
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
+  AUTOLOAD:=$(call AutoProbe,ipw2200)
+endef
 
-	config B43_FW_5_10
-		bool "Firmware 508.1084 from driver 5.10.56.27"
-		help
-		  Older firmware for BCM43xx devices.
+define KernelPackage/ipw2200/description
+ Kernel support for Intel IPW2200
+ Includes:
+ - ipw2200
+endef
 
-		  If unsure, select the "stable" firmware.
 
-	config B43_FW_5_100_138
-		bool "Firmware 666.2 from driver 5.100.138 (stable)"
-		help
-		  The currently default firmware for BCM43xx devices.
+define KernelPackage/libertas-usb
+  $(call KernelPackage/mac80211/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT
+  TITLE:=Marvell 88W8015 Wireless Driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
+  AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
+endef
 
-		  This firmware currently gets most of the testing and is needed for some N-PHY devices.
+define KernelPackage/libertas-sdio
+  $(call KernelPackage/mac80211/Default)
+  DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml
+  TITLE:=Marvell 88W8686 Wireless Driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
+endef
 
-		  If unsure, select the this firmware.
+define KernelPackage/mac80211-hwsim
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=mac80211 HW simulation device
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
+  AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
+endef
 
-	config B43_FW_6_30
-		bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
-		help
-		  Newer experimental firmware for BCM43xx devices.
+PKG_MT7601U_FW_NAME:=DPO_MT7601U_LinuxSTA
+PKG_MT7601U_FW_VERSION:=3.0.0.4_20130913
+PKG_MT7601U_FW_MD5SUM:=5f440dccc8bc952745a191994fc34699
+PKG_MT7601U_FW_SOURCE:=$(PKG_MT7601U_FW_NAME)_$(PKG_MT7601U_FW_VERSION).tar.bz2
+PKG_MT7601U_FW_SOURCE_URL:=http://www.mediatek.com/AmazonS3/Downloads/linux/
+define Download/mt7601u-firmware
+  FILE:=$(PKG_MT7601U_FW_SOURCE)
+  URL:=$(PKG_MT7601U_FW_SOURCE_URL)
+  MD5SUM:=$(PKG_MT7601U_FW_MD5SUM)
+  SUBDIR:=$(PKG_MT7601U_FW_NAME)_$(PKG_MT7601U_FW_VERSION)
+endef
+$(eval $(call Download,mt7601u-firmware))
 
-		  This firmware is mostly untested.
+define KernelPackage/mt7601u
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=MT7601U-based USB dongles Wireless Driver
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT @USB_SUPPORT +kmod-usb-core
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko
+  AUTOLOAD:=$(call AutoProbe,mt7601)
+endef
 
-		  If unsure, select the "stable" firmware.
 
-	config B43_OPENFIRMWARE
-		bool "Open FirmWare for WiFi networks"
-		help
-		  Opensource firmware for BCM43xx devices.
+define KernelPackage/mwl8k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
+  URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
+  AUTOLOAD:=$(call AutoProbe,mwl8k)
+endef
 
-		  Do _not_ select this, unless you know what you are doing.
-		  The Opensource firmware is not suitable for embedded devices, yet.
-		  It does not support QoS, which is bad for AccessPoints.
-		  It does not support hardware crypto acceleration, which is a showstopper
-		  for embedded devices with low CPU resources.
+define KernelPackage/mwl8k/description
+ Kernel modules for Marvell TOPDOG 802.11 Wireless cards
+endef
 
-		  If unsure, select the "stable" firmware.
 
-	endchoice
+define KernelPackage/mwifiex-pcie
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
+  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko
+  AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
+endef
 
-	config B43_FW_SQUASH
-		bool "Remove unnecessary firmware files"
-		depends on !B43_OPENFIRMWARE
-		default y
-		help
-		  This options allows you to remove unnecessary b43 firmware files
-		  from the final rootfs image. This can reduce the rootfs size by
-		  up to 200k.
+define KernelPackage/mwifiex-pcie/description
+ Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
+endef
 
-		  If unsure, say Y.
 
-	config B43_FW_SQUASH_COREREVS
-		string "Core revisions to include"
-		depends on B43_FW_SQUASH
-		default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
-		default "16,28,29,30" if TARGET_brcm47xx_mips74k
-		default "5,6,7,8,9,10,11,13,15,16,28,29,30"
-		help
-		  This is a comma seperated list of core revision numbers.
+# Prism54 drivers
+P54PCIFW:=2.13.12.0.arm
+P54USBFW:=2.13.24.0.lm87.arm
+P54SPIFW:=2.13.0.0.a.13.14.arm
 
-		  Example (keep files for rev5 only):
-		    5
+define Download/p54usb
+  FILE:=$(P54USBFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb
+  MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6
+endef
+$(eval $(call Download,p54usb))
 
-		  Example (keep files for rev5 and rev11):
-		    5,11
+define Download/p54pci
+  FILE:=$(P54PCIFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac
+  MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4
+endef
+$(eval $(call Download,p54pci))
 
-	config B43_FW_SQUASH_PHYTYPES
-		string "PHY types to include"
-		depends on B43_FW_SQUASH
-		default "G,N,LP" if TARGET_brcm47xx_legacy
-		default "N,HT" if TARGET_brcm47xx_mips74k
-		default "G,N,LP,HT"
-		help
-		  This is a comma seperated list of PHY types:
-		    A  => A-PHY
-		    AG => Dual A-PHY G-PHY
-		    G  => G-PHY
-		    LP => LP-PHY
-		    N  => N-PHY
-		    HT  => HT-PHY
-		    LCN  => LCN-PHY
-		    LCN40  => LCN40-PHY
-		    AC  => AC-PHY
+define Download/p54spi
+  FILE:=$(P54SPIFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560
+  MD5SUM:=42661f8ecbadd88012807493f596081d
+endef
+$(eval $(call Download,p54spi))
 
-		  Example (keep files for G-PHY only):
-		    G
+define KernelPackage/p54/Default
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Prism54 Drivers
+endef
 
-		  Example (keep files for G-PHY and N-PHY):
-		    G,N
+define KernelPackage/p54/description
+  Kernel module for Prism54 chipsets (mac80211)
+endef
 
-	choice
-		prompt "Supported buses"
-		default PACKAGE_B43_BUSES_BCMA_AND_SSB
-		help
-		  This allows choosing buses that b43 should support.
+define KernelPackage/p54-common
+  $(call KernelPackage/p54/Default)
+  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
+  TITLE+= (COMMON)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko
+endef
 
-	config PACKAGE_B43_BUSES_BCMA_AND_SSB
-		depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
-		bool "BCMA and SSB"
+define KernelPackage/p54-pci
+  $(call KernelPackage/p54/Default)
+  TITLE+= (PCI)
+  DEPENDS+= @PCI_SUPPORT +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko
+  AUTOLOAD:=$(call AutoProbe,p54pci)
+endef
 
-	config PACKAGE_B43_BUSES_BCMA
-		depends on !TARGET_brcm47xx_legacy
-		bool "BCMA only"
+define KernelPackage/p54-usb
+  $(call KernelPackage/p54/Default)
+  TITLE+= (USB)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko
+  AUTOLOAD:=$(call AutoProbe,p54usb)
+endef
 
-	config PACKAGE_B43_BUSES_SSB
-		depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
-		bool "SSB only"
+define KernelPackage/p54-spi
+  $(call KernelPackage/p54/Default)
+  TITLE+= (SPI)
+  DEPENDS+= @TARGET_omap24xx +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko
+  AUTOLOAD:=$(call AutoProbe,p54spi)
+endef
 
-	endchoice
+define KernelPackage/rt2x00/Default
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Ralink Drivers for RT2x00 cards
+endef
 
-	config PACKAGE_B43_DEBUG
-		bool "Enable debug output and debugfs for b43"
-		default n
-		help
-		  Enable additional debug output and runtime sanity checks for b43
-		  and enables the debugfs interface.
+define KernelPackage/rt2x00-lib
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
+  TITLE+= (LIB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko
+  MENU:=1
+endef
 
-		  If unsure, say N.
+define KernelPackage/rt2x00-lib/config
+  if PACKAGE_kmod-rt2x00-lib
 
-	config PACKAGE_B43_PIO
-		bool "Enable support for PIO transfer mode"
-		default n
+	config PACKAGE_RT2X00_LIB_DEBUGFS
+		bool "Enable rt2x00 debugfs support"
+		depends on PACKAGE_MAC80211_DEBUGFS
 		help
-		  Enable support for using PIO instead of DMA. Unless you have DMA
-		  transfer problems you don't need this.
-
-		  If unsure, say N.
+		  Enable creation of debugfs files for the rt2x00 drivers.
+		  These debugfs files support both reading and writing of the
+		  most important register types of the rt2x00 hardware.
 
-	config PACKAGE_B43_PHY_G
-		bool "Enable support for G-PHYs"
-		default n if TARGET_brcm47xx_mips74k
-		default y
+	config PACKAGE_RT2X00_DEBUG
+		bool "Enable rt2x00 debug output"
 		help
-		  Enable support for G-PHY. This includes support for the following devices:
-		  PCI: BCM4306, BCM4311, BCM4318
-		  SoC: BCM5352E, BCM4712
+		  Enable debugging output for all rt2x00 modules
 
-		  If unsure, say Y.
+  endif
+endef
 
-	config PACKAGE_B43_PHY_N
-		bool "Enable support for N-PHYs"
-		default y
-		help
-		  Enable support for N-PHY. This includes support for the following devices:
-		  PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
-		  SoC: BCM4716, BCM4717, BCM4718
+define KernelPackage/rt2x00-mmio
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
+  HIDDEN:=1
+  TITLE+= (MMIO)
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko
+endef
 
-		  Currently only 11g speed is available.
+define KernelPackage/rt2x00-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
+  HIDDEN:=1
+  TITLE+= (PCI)
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2x00pci)
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2x00-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
+  HIDDEN:=1
+  TITLE+= (USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2x00usb)
+endef
 
-	config PACKAGE_B43_PHY_LP
-		bool "Enable support for LP-PHYs"
-		default n if TARGET_brcm47xx_mips74k
-		default y
-		help
-		  Enable support for LP-PHY. This includes support for the following devices:
-		  PCI: BCM4312
-		  SoC: BCM5354
+define KernelPackage/rt2800-lib
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
+  HIDDEN:=1
+  TITLE+= (rt2800 LIB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2400-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
+  TITLE+= (RT2400 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2400pci)
+endef
 
-	config PACKAGE_B43_PHY_HT
-		bool "Enable support for HT-PHYs"
-		default n if TARGET_brcm47xx_legacy
-		default y
-		help
-		  Enable support for HT-PHY. This includes support for the following devices:
-		  PCI: BCM4331
+define KernelPackage/rt2500-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
+  TITLE+= (RT2500 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2500pci)
+endef
+
+define KernelPackage/rt2500-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
+  TITLE+= (RT2500 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2500usb)
+endef
+
+define KernelPackage/rt2800-mmio
+$(call KernelPackage/rt2x00/Default)
+  TITLE += (RT28xx/RT3xxx MMIO)
+  DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800mmio.ko
+endef
 
-		  Currently only 11g speed is available.
+define KernelPackage/rt2800-soc
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
+  TITLE += (RT28xx/RT3xxx SoC)
+  FILES := \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800soc.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800soc)
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rt2800-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio
+  TITLE+= (RT2860 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800pci)
+endef
 
-	config PACKAGE_B43_PHY_LCN
-		bool "Enable support for LCN-PHYs"
-		depends on BROKEN
-		default n
-		help
-		  Currently broken.
+define KernelPackage/rt2800-usb
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt
+  TITLE+= (RT2870 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt2800usb)
+endef
 
-		  If unsure, say N.
 
-  endif
+define KernelPackage/rt61-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
+  TITLE+= (RT2x61 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt61pci)
 endef
 
-define KernelPackage/b43/description
-Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
+define KernelPackage/rt73-usb
+  $(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
+  TITLE+= (RT73 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt73usb)
 endef
 
-define KernelPackage/b43legacy
+
+define KernelPackage/rtl818x/Default
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom 43xx-legacy wireless support
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
-  KCONFIG:= \
-  	CONFIG_HW_RANDOM=y
-  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
-  AUTOLOAD:=$(call AutoProbe,b43legacy)
-  MENU:=1
+  TITLE:=Realtek Drivers for RTL818x devices
+  URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187
+  DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211
 endef
 
-define KernelPackage/b43legacy/config
-  if PACKAGE_kmod-b43legacy
-
-	config B43LEGACY_FW_SQUASH
-		bool "Remove unnecessary firmware files"
-		default y
-		help
-		  This options allows you to remove unnecessary b43legacy firmware files
-		  from the final rootfs image. This can reduce the rootfs size by
-		  up to 50k.
+define KernelPackage/rtl8180
+  $(call KernelPackage/rtl818x/Default)
+  DEPENDS+= @PCI_SUPPORT
+  TITLE+= (RTL8180 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180/rtl818x_pci.ko
+  AUTOLOAD:=$(call AutoProbe,rtl818x_pci)
+endef
 
-		  If unsure, say Y.
+define KernelPackage/rtl8187
+$(call KernelPackage/rtl818x/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core
+  TITLE+= (RTL8187 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8187)
+endef
 
-	config B43LEGACY_FW_SQUASH_COREREVS
-		string "Core revisions to include"
-		depends on B43LEGACY_FW_SQUASH
-		default "1,2,3,4"
+define KernelPackage/rtlwifi/config
+	config PACKAGE_RTLWIFI_DEBUG
+		bool "Realtek wireless debugging"
+		depends on PACKAGE_kmod-rtlwifi
 		help
-		  This is a comma seperated list of core revision numbers.
+		  Say Y, if you want to debug realtek wireless drivers.
 
-		  Example (keep files for rev4 only):
-		    4
+endef
 
-		  Example (keep files for rev2 and rev4):
-		    2,4
+define KernelPackage/rtlwifi
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek common driver part
+  DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtlwifi.ko
+  HIDDEN:=1
+endef
 
-  endif
+define KernelPackage/rtlwifi-pci
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek common driver part (PCI support)
+  DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_pci.ko
+  AUTOLOAD:=$(call AutoProbe,rtl_pci)
+  HIDDEN:=1
 endef
 
-define KernelPackage/b43legacy/description
-Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
+define KernelPackage/rtlwifi-usb
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek common driver part (USB support)
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_usb.ko
+  AUTOLOAD:=$(call AutoProbe,rtl_usb)
+  HIDDEN:=1
 endef
 
+define KernelPackage/rtl8192c-common
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192CE/RTL8192CU common support module
+  DEPENDS+= +kmod-rtlwifi
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
+  HIDDEN:=1
+endef
 
-define KernelPackage/brcmutil
+define KernelPackage/rtl8192ce
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n common driver parts
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
-  AUTOLOAD:=$(call AutoProbe,brcmutil)
-  MENU:=1
+  TITLE:=Realtek RTL8192CE/RTL8188CE support
+  DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192ce)
 endef
 
-define KernelPackage/brcmutil/description
- This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
+define KernelPackage/rtl8192ce/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfw.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU_B.bin $(1)/lib/firmware/rtlwifi
 endef
 
-define KernelPackage/brcmutil/config
-  if PACKAGE_kmod-brcmutil
+define KernelPackage/rtl8192se
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192SE/RTL8191SE support
+  DEPENDS+= +kmod-rtlwifi-pci
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192se)
+endef
 
-	config PACKAGE_BRCM80211_DEBUG
-		bool "Broadcom wireless driver debugging"
-		help
-		  Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
+define KernelPackage/rtl8192se/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi
+endef
 
-  endif
+define KernelPackage/rtl8192de
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192DE/RTL8188DE support
+  DEPENDS+= +kmod-rtlwifi-pci
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192de)
 endef
 
-PKG_BRCMSMAC_FW_NAME:=broadcom-wl
-PKG_BRCMSMAC_FW_VERSION:=5.100.138
-PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
-PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
-PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
+define KernelPackage/rtl8192de/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi
+endef
 
-define Download/brcmsmac
-  FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
-  URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
-  MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM)
+define KernelPackage/rtl8192cu
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Realtek RTL8192CU/RTL8188CU support
+  DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common
+  FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8192cu)
 endef
-$(eval $(call Download,brcmsmac))
 
-define KernelPackage/brcmsmac
+define KernelPackage/rtl8192cu/install
+	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_A.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_B.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_TMSC.bin $(1)/lib/firmware/rtlwifi
+endef
+
+
+define KernelPackage/wlcore
   $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
-  AUTOLOAD:=$(call AutoProbe,brcmsmac)
-  MENU:=1
+  TITLE:=TI common driver part
+  DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
 endef
 
-define KernelPackage/brcmsmac/description
- Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
+define KernelPackage/wlcore/description
+ This module contains some common parts needed by TI Wireless drivers.
 endef
 
-define KernelPackage/brcmsmac/config
-  if PACKAGE_kmod-brcmsmac
+define KernelPackage/wl12xx
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for TI WL12xx
+  URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
+  DEPENDS+= +kmod-wlcore
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
+  AUTOLOAD:=$(call AutoProbe,wl12xx)
+endef
 
-	config BRCMSMAC_USE_FW_FROM_WL
-		bool "Use firmware extracted from broadcom proprietary driver"
-		default y
-		help
-		  Instead of using the official brcmsmac firmware a firmware
-		  version 666.2 extracted from the proprietary Broadcom driver
-		  is used. This is needed to get core rev 17 used in bcm4716
-		  to work.
+define KernelPackage/wl12xx/description
+ Kernel modules for TI WL12xx
+endef
 
-		  If unsure, say Y.
+define KernelPackage/wl18xx
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for TI WL18xx
+  URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
+  DEPENDS+= +kmod-wlcore
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
+  AUTOLOAD:=$(call AutoProbe,wl18xx)
+endef
 
-  endif
+define KernelPackage/wl18xx/description
+ Kernel modules for TI WL18xx
 endef
 
 
-define KernelPackage/brcmfmac
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
-  URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
-  AUTOLOAD:=$(call AutoProbe,brcmfmac)
+ZD1211FW_NAME:=zd1211-firmware
+ZD1211FW_VERSION:=1.4
+define Download/zd1211rw
+  FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
+  URL:=@SF/zd1211/
+  MD5SUM:=19f28781d76569af8551c9d11294c870
 endef
+$(eval $(call Download,zd1211rw))
 
-define KernelPackage/brcmfmac/description
- Kernel module for Broadcom IEEE802.11n USB Wireless cards
+define KernelPackage/zd1211rw
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Zydas ZD1211 support
+  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko
+  AUTOLOAD:=$(call AutoProbe,zd1211rw)
 endef
 
-define KernelPackage/brcmfmac/config
-  if PACKAGE_kmod-brcmfmac
-
-	config BRCMFMAC_SDIO
-		bool "Enable SDIO bus interface support"
-		default n
-		help
-		  Enable support for cards attached to an SDIO bus.
-		  Select this option only if you are sure that your
-		  board has a Broadcom wireless chip atacched to
-		  that bus.
-
-	config BRCMFMAC_USB
-		bool "Enable USB bus interface support"
-		depends on USB_SUPPORT
-		default y
-		help
-		  Supported USB connected chipsets:
-		  BCM43235, BCM43236, BCM43238 (all in revision 3 only)
-		  BCM43143, BCM43242, BCM43566, BCM43569
-
-	config BRCMFMAC_PCIE
-		bool "Enable PCIE bus interface support"
-		depends on PCI_SUPPORT
-		default y
-		help
-		  Supported PCIe connected chipsets:
-		  BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
 
-  endif
-endef
 
 config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m)
 
@@ -1602,6 +1684,8 @@ config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
 config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
 
 config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
+config-$(call config_package,mt7601u) += MT7601U
+config-y += WL_MEDIATEK
 
 config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB
 config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI
@@ -1623,26 +1707,28 @@ config-$(call config_package,rt2800-pci) += RT2800PCI
 config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290
 
 config-$(call config_package,rt2800-usb) += RT2800USB
-config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX
+config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN
 
 config-$(call config_package,iwl-legacy) += IWLEGACY
 config-$(call config_package,iwl3945) += IWL3945
 config-$(call config_package,iwl4965) += IWL4965
-config-$(call config_package,iwlagn) += IWLWIFI IWLDVM
+config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM
+config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG
+config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS
 
-config-$(call config_package,net-libipw) += LIBIPW
-config-$(call config_package,net-ipw2100) += IPW2100
-config-$(call config_package,net-ipw2200) += IPW2200
+config-$(call config_package,libipw) += LIBIPW
+config-$(call config_package,ipw2100) += IPW2100
+config-$(call config_package,ipw2200) += IPW2200
 
 config-$(call config_package,p54-common) += P54_COMMON
 config-$(call config_package,p54-pci) += P54_PCI
 config-$(call config_package,p54-usb) += P54_USB
 config-$(call config_package,p54-spi) += P54_SPI
 
-config-$(call config_package,net-hermes) += HERMES
-config-$(call config_package,net-hermes-pci) += PCI_HERMES
-config-$(call config_package,net-hermes-plx) += PLX_HERMES
-config-$(call config_package,net-hermes-pcmcia) += PCMCIA_HERMES
+config-$(call config_package,hermes) += HERMES
+config-$(call config_package,hermes-pci) += PCI_HERMES
+config-$(call config_package,hermes-plx) += PLX_HERMES
+config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES
 config-y += HERMES_PRISM
 
 config-$(call config_package,adm8211) += ADM8211
@@ -1702,8 +1788,9 @@ define Build/Prepare
 	$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
 	$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
 	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
-	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE)
+	$(TAR) -C $(PKG_BUILD_DIR) -xJf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE)
 	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
+	$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_MT7601U_FW_SOURCE)
 	rm -rf \
 		$(PKG_BUILD_DIR)/include/linux/ssb \
 		$(PKG_BUILD_DIR)/include/linux/bcma \
@@ -1739,233 +1826,37 @@ define Build/Compile
 	$(MAKE) $(MAKE_OPTS) allnoconfig
 	$(call Build/Compile/kmod)
 endef
-
-define Build/InstallDev
-	mkdir -p \
-		$(1)/usr/include/mac80211 \
-		$(1)/usr/include/mac80211-backport \
-		$(1)/usr/include/mac80211/ath \
-		$(1)/usr/include/net/mac80211
-	$(CP) $(PKG_BUILD_DIR)/net/mac80211/*.h $(PKG_BUILD_DIR)/include/* $(1)/usr/include/mac80211/
-	$(CP) $(PKG_BUILD_DIR)/backport-include/* $(1)/usr/include/mac80211-backport/
-	$(CP) $(PKG_BUILD_DIR)/net/mac80211/rate.h $(1)/usr/include/net/mac80211/
-	$(CP) $(PKG_BUILD_DIR)/drivers/net/wireless/ath/*.h $(1)/usr/include/mac80211/ath/
-	rm -f $(1)/usr/include/mac80211-backport/linux/module.h
-endef
-
-define KernelPackage/libertas-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware/libertas
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8388_v9.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8682.bin \
-		$(1)/lib/firmware/libertas/
-endef
-
-define KernelPackage/libertas-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/libertas
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688_helper.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688.bin \
-		$(1)/lib/firmware/libertas
-endef
-
-define KernelPackage/cfg80211/install
-	$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
-	$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
-	$(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless
-endef
-
-define KernelPackage/p54-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci
-endef
-
-define KernelPackage/p54-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb
-endef
-
-define KernelPackage/p54-spi/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm
-endef
-
-define KernelPackage/rt61-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561s.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2661.bin \
-		$(1)/lib/firmware/
-endef
-
-define KernelPackage/rt73-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt73.bin $(1)/lib/firmware/
-endef
-
-define KernelPackage/rt2800-pci/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2860.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt3290.bin \
-		$(1)/lib/firmware
-endef
-
-define KernelPackage/rt2800-usb/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2870.bin $(1)/lib/firmware/
-endef
-
-define KernelPackage/wl12xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-mr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-plt.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-sr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl1271-nvs.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-mr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-plt.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-sr.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-nvs.bin \
-		$(1)/lib/firmware/ti-connectivity
-endef
-
-define KernelPackage/wl18xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-conf.bin \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-3.bin \
-		$(1)/lib/firmware/ti-connectivity
-endef
-
-define KernelPackage/zd1211rw/install
-	$(INSTALL_DIR) $(1)/lib/firmware/zd1211
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
-endef
-
-define KernelPackage/carl9170/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/carl9170-1.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/ath9k-htc/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_9271.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_7010.fw \
-		$(1)/lib/firmware/
-endef
-
-define KernelPackage/ath10k/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/ath10k/QCA988X/hw2.0/board.bin \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
-ifeq ($(CONFIG_ATH10K_STA_FW),y)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/main/firmware-2.bin_999.999.0.636 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
-else ifeq ($(CONFIG_ATH10K_API2_FW),y)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.1/firmware-2.bin_10.1.467.2-1 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
-else
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.2.4/firmware-4.bin_10.2.4.45 \
-		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-4.bin
-endif
-endef
-
-define KernelPackage/mwl8k/install
-	$(INSTALL_DIR) $(1)/lib/firmware/mwl8k
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366_ap-3.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8366.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8687.fw \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8687.fw \
-		$(1)/lib/firmware/mwl8k/
-endef
-
-define KernelPackage/mwifiex-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mrvl/pcie8897_uapsta.bin \
-		$(1)/lib/firmware/mrvl/
-endef
-
-define KernelPackage/net-ipw2100/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/net-ipw2200/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware
-endef
-
-define KernelPackage/iwlagn/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-ifneq ($(CONFIG_IWL5000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL5150_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL1000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6050_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6005_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL6030_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL7260_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7260-9.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL7265_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7265-9.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL100_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-100-5.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL2000_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL2030_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL105_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-105-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL135_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-135-6.ucode $(1)/lib/firmware
-endif
-ifneq ($(CONFIG_IWL3160_FW),)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3160-9.ucode $(1)/lib/firmware
-endif
+
+define Build/InstallDev
+	mkdir -p \
+		$(1)/usr/include/mac80211 \
+		$(1)/usr/include/mac80211-backport \
+		$(1)/usr/include/mac80211/ath \
+		$(1)/usr/include/net/mac80211
+	$(CP) $(PKG_BUILD_DIR)/net/mac80211/*.h $(PKG_BUILD_DIR)/include/* $(1)/usr/include/mac80211/
+	$(CP) $(PKG_BUILD_DIR)/backport-include/* $(1)/usr/include/mac80211-backport/
+	$(CP) $(PKG_BUILD_DIR)/net/mac80211/rate.h $(1)/usr/include/net/mac80211/
+	$(CP) $(PKG_BUILD_DIR)/drivers/net/wireless/ath/*.h $(1)/usr/include/mac80211/ath/
+	rm -f $(1)/usr/include/mac80211-backport/linux/module.h
 endef
 
-define KernelPackage/iwl3945/install
+
+define KernelPackage/ath9k-htc/install
 	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_9271.fw \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_7010.fw \
+		$(1)/lib/firmware/
 endef
 
-define KernelPackage/iwl4965/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware
+define KernelPackage/ath10k/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/ath10k/QCA988X/hw2.0/board.bin \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.2.4/untested/firmware-5.bin_10.2.4.70-2 \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
 endef
 
 define KernelPackage/b43/install
@@ -2028,13 +1919,237 @@ ifneq ($(CONFIG_BRCMFMAC_PCIE),)
 endif
 endef
 
+define KernelPackage/carl9170/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/carl9170-1.fw $(1)/lib/firmware
+endef
+
+define KernelPackage/cfg80211/install
+	$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
+	$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
+	$(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless
+endef
+
+define KernelPackage/ipw2100/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware
+endef
+
+define KernelPackage/ipw2200/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware
+endef
+
+define KernelPackage/iwlwifi/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+ifneq ($(CONFIG_IWL100_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-100-5.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL1000_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL105_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-105-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL135_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-135-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL2000_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL2030_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL3160_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3160-13.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL5000_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL5150_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL6000_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL6005_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL6030_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL6050_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL7260_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7260-13.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL7265_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7265-13.ucode $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7265D-13.ucode $(1)/lib/firmware
+endif
+ifneq ($(CONFIG_IWL8000_FW),)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-8000C-13.ucode $(1)/lib/firmware
+endif
+endef
+
+define KernelPackage/iwl3945/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware
+endef
+
+define KernelPackage/iwl4965/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware
+endef
+
+define KernelPackage/libertas-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware/libertas
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8388_v9.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8682.bin \
+		$(1)/lib/firmware/libertas/
+endef
+
+define KernelPackage/libertas-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/libertas
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385_helper.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9_helper.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688_helper.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688.bin \
+		$(1)/lib/firmware/libertas
+endef
+
+define KernelPackage/mt7601u/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_MT7601U_FW_NAME)_$(PKG_MT7601U_FW_VERSION)/mcu/bin/MT7601.bin \
+		$(1)/lib/firmware/mt7601u.bin
+endef
+
+define KernelPackage/mwl8k/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mwl8k
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366_ap-3.fw \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366.fw \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8366.fw \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8687.fw \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8687.fw \
+		$(1)/lib/firmware/mwl8k/
+endef
+
+define KernelPackage/mwifiex-pcie/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mrvl/pcie8897_uapsta.bin \
+		$(1)/lib/firmware/mrvl/
+endef
+
+define KernelPackage/p54-pci/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci
+endef
+
+define KernelPackage/p54-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb
+endef
+
+define KernelPackage/p54-spi/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm
+endef
+
+define KernelPackage/rt2800-pci/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2860.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt3290.bin \
+		$(1)/lib/firmware
+endef
+
+define KernelPackage/rt2800-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2870.bin $(1)/lib/firmware/
+endef
+
+define KernelPackage/rt61-pci/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561s.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2661.bin \
+		$(1)/lib/firmware/
+endef
+
+define KernelPackage/rt73-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt73.bin $(1)/lib/firmware/
+endef
+
+define KernelPackage/wl12xx/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-mr.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-plt.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-sr.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl1271-nvs.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-mr.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-plt.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-sr.bin \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-nvs.bin \
+		$(1)/lib/firmware/ti-connectivity
+endef
+
+define KernelPackage/wl18xx/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-4.bin \
+		$(1)/lib/firmware/ti-connectivity
+endef
+
+define KernelPackage/zd1211rw/install
+	$(INSTALL_DIR) $(1)/lib/firmware/zd1211
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
+endef
+
+
 $(eval $(call KernelPackage,adm8211))
+$(eval $(call KernelPackage,ath))
+$(eval $(call KernelPackage,ath10k))
 $(eval $(call KernelPackage,ath5k))
+$(eval $(call KernelPackage,ath9k))
+$(eval $(call KernelPackage,ath9k-common))
+$(eval $(call KernelPackage,ath9k-htc))
+$(eval $(call KernelPackage,b43))
+$(eval $(call KernelPackage,b43legacy))
+$(eval $(call KernelPackage,brcmsmac))
+$(eval $(call KernelPackage,brcmfmac))
+$(eval $(call KernelPackage,brcmutil))
+$(eval $(call KernelPackage,carl9170))
+$(eval $(call KernelPackage,cfg80211))
+$(eval $(call KernelPackage,hermes))
+$(eval $(call KernelPackage,hermes-pci))
+$(eval $(call KernelPackage,hermes-plx))
+$(eval $(call KernelPackage,hermes-pcmcia))
+$(eval $(call KernelPackage,iwlwifi))
+$(eval $(call KernelPackage,iwl-legacy))
+$(eval $(call KernelPackage,iwl4965))
+$(eval $(call KernelPackage,iwl3945))
 $(eval $(call KernelPackage,lib80211))
 $(eval $(call KernelPackage,libertas-usb))
 $(eval $(call KernelPackage,libertas-sdio))
-$(eval $(call KernelPackage,cfg80211))
+$(eval $(call KernelPackage,libipw))
+$(eval $(call KernelPackage,ipw2100))
+$(eval $(call KernelPackage,ipw2200))
 $(eval $(call KernelPackage,mac80211))
+$(eval $(call KernelPackage,mac80211-hwsim))
+$(eval $(call KernelPackage,mt7601u))
+$(eval $(call KernelPackage,mwl8k))
+$(eval $(call KernelPackage,mwifiex-pcie))
 $(eval $(call KernelPackage,p54-common))
 $(eval $(call KernelPackage,p54-pci))
 $(eval $(call KernelPackage,p54-usb))
@@ -2047,12 +2162,12 @@ $(eval $(call KernelPackage,rt2800-lib))
 $(eval $(call KernelPackage,rt2400-pci))
 $(eval $(call KernelPackage,rt2500-pci))
 $(eval $(call KernelPackage,rt2500-usb))
-$(eval $(call KernelPackage,rt61-pci))
-$(eval $(call KernelPackage,rt73-usb))
 $(eval $(call KernelPackage,rt2800-mmio))
 $(eval $(call KernelPackage,rt2800-soc))
 $(eval $(call KernelPackage,rt2800-pci))
 $(eval $(call KernelPackage,rt2800-usb))
+$(eval $(call KernelPackage,rt61-pci))
+$(eval $(call KernelPackage,rt73-usb))
 $(eval $(call KernelPackage,rtl8180))
 $(eval $(call KernelPackage,rtl8187))
 $(eval $(call KernelPackage,rtlwifi))
@@ -2063,32 +2178,7 @@ $(eval $(call KernelPackage,rtl8192ce))
 $(eval $(call KernelPackage,rtl8192se))
 $(eval $(call KernelPackage,rtl8192de))
 $(eval $(call KernelPackage,rtl8192cu))
-$(eval $(call KernelPackage,zd1211rw))
-$(eval $(call KernelPackage,mac80211-hwsim))
-$(eval $(call KernelPackage,ath9k-common))
-$(eval $(call KernelPackage,ath9k))
-$(eval $(call KernelPackage,ath9k-htc))
-$(eval $(call KernelPackage,ath10k))
-$(eval $(call KernelPackage,ath))
-$(eval $(call KernelPackage,carl9170))
-$(eval $(call KernelPackage,b43))
-$(eval $(call KernelPackage,b43legacy))
-$(eval $(call KernelPackage,brcmutil))
-$(eval $(call KernelPackage,brcmsmac))
-$(eval $(call KernelPackage,brcmfmac))
-$(eval $(call KernelPackage,net-libipw))
-$(eval $(call KernelPackage,net-ipw2100))
-$(eval $(call KernelPackage,net-ipw2200))
-$(eval $(call KernelPackage,iwlagn))
-$(eval $(call KernelPackage,iwl-legacy))
-$(eval $(call KernelPackage,iwl4965))
-$(eval $(call KernelPackage,iwl3945))
-$(eval $(call KernelPackage,mwl8k))
-$(eval $(call KernelPackage,mwifiex-pcie))
-$(eval $(call KernelPackage,net-hermes))
-$(eval $(call KernelPackage,net-hermes-pci))
-$(eval $(call KernelPackage,net-hermes-plx))
-$(eval $(call KernelPackage,net-hermes-pcmcia))
 $(eval $(call KernelPackage,wlcore))
 $(eval $(call KernelPackage,wl12xx))
 $(eval $(call KernelPackage,wl18xx))
+$(eval $(call KernelPackage,zd1211rw))
diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
index c9bc3d6..2a8d2f9 100644
--- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
+++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
@@ -486,7 +486,7 @@ mac80211_prepare_vif() {
 		# All interfaces must have unique mac addresses
 		# which can either be explicitly set in the device
 		# section, or automatically generated
-		ifconfig "$ifname" hw ether "$macaddr"
+		ip link set dev "$ifname" address "$macaddr"
 	fi
 
 	json_select ..
@@ -582,7 +582,7 @@ mac80211_setup_vif() {
 	json_get_vars mode
 	json_get_var vif_txpower txpower
 
-	ifconfig "$ifname" up || {
+	ip link set dev "$ifname" up || {
 		wireless_setup_vif_failed IFUP_ERROR
 		json_select ..
 		return
@@ -638,7 +638,7 @@ mac80211_interface_cleanup() {
 	local phy="$1"
 
 	for wdev in $(list_phy_interfaces "$phy"); do
-		ifconfig "$wdev" down 2>/dev/null
+		ip link set dev "$wdev" down 2>/dev/null
 		iw dev "$wdev" del
 	done
 }
diff --git a/package/kernel/mac80211/files/regdb.txt b/package/kernel/mac80211/files/regdb.txt
index ba95fc6..84413fd 100644
--- a/package/kernel/mac80211/files/regdb.txt
+++ b/package/kernel/mac80211/files/regdb.txt
@@ -6,7 +6,7 @@ country 00:
 	# Channel 14. Only JP enables this and for 802.11b only
 	(2474 - 2494 @ 20), (20), NO-IR, NO-OFDM
 	# Channel 36 - 48
-	(5170 - 5250 @ 80), (20)
+	(5170 - 5250 @ 80), (20), AUTO-BW
 	# Channel 52 - 64
 	(5250 - 5330 @ 80), (20), NO-IR, DFS, AUTO-BW
 	# Channel 100 - 144
@@ -54,8 +54,8 @@ country AL: DFS-ETSI
 
 country AM: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (18)
-	(5250 - 5330 @ 80), (18), DFS
+	(5170 - 5250 @ 20), (18)
+	(5250 - 5330 @ 20), (18), DFS
 
 country AN: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
@@ -85,7 +85,7 @@ country AT: DFS-ETSI
 	# 60 gHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
-country AU:
+country AU: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
@@ -141,14 +141,20 @@ country BG: DFS-ETSI
 	(5170 - 5250 @ 80), (20), AUTO-BW
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5490 - 5710 @ 160), (27), DFS
+	# 5 gHz Short Range Devices, ref:
+	# Etsi EN 300 440-1
+	# Etsi EN 300 440-2
+	# http://crc.bg/files/_bg/Spisak_2015.pdf
+	# http://crc.bg/files/_bg/Pravila_2015_resh24.pdf
+	(5725 - 5875 @ 80), (14)
 	# 60 gHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
 country BH: DFS-JP
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (20)
-	(5250 - 5330 @ 80), (20), DFS
-	(5735 - 5835 @ 80), (20)
+	(5170 - 5250 @ 20), (20)
+	(5250 - 5330 @ 20), (20), DFS
+	(5735 - 5835 @ 20), (20)
 
 country BL: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
@@ -263,10 +269,10 @@ country CO: DFS-FCC
 
 country CR: DFS-FCC
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (17)
-	(5250 - 5330 @ 80), (24), DFS
-	(5490 - 5730 @ 80), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 20), (17)
+	(5250 - 5330 @ 20), (24), DFS
+	(5490 - 5730 @ 20), (24), DFS
+	(5735 - 5835 @ 20), (30)
 
 country CX: DFS-FCC
 	(2402 - 2482 @ 40), (20)
@@ -349,10 +355,10 @@ country DZ: DFS-JP
 
 country EC: DFS-FCC
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (17)
-	(5250 - 5330 @ 80), (24), DFS
-	(5490 - 5730 @ 80), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 20), (17)
+	(5250 - 5330 @ 20), (24), DFS
+	(5490 - 5730 @ 20), (24), DFS
+	(5735 - 5835 @ 20), (30)
 
 country EE: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
@@ -364,8 +370,8 @@ country EE: DFS-ETSI
 
 country EG: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (20)
-	(5250 - 5330 @ 80), (20), DFS
+	(5170 - 5250 @ 40), (20)
+	(5250 - 5330 @ 40), (20), DFS
 
 # Orden IET/787/2013, de 25 de abril, por la que se aprueba
 # el cuadro nacional de atribución de frecuencias.
@@ -474,10 +480,10 @@ country GT: DFS-FCC
 
 country GU: DFS-FCC
 	(2402 - 2472 @ 40), (30)
-	(5170 - 5250 @ 80), (17)
-	(5250 - 5330 @ 80), (24), DFS
-	(5490 - 5730 @ 80), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 20), (17)
+	(5250 - 5330 @ 20), (24), DFS
+	(5490 - 5730 @ 20), (24), DFS
+	(5735 - 5835 @ 20), (30)
 
 country GY:
 	(2402 - 2482 @ 40), (30)
@@ -522,8 +528,8 @@ country HU: DFS-ETSI
 
 country ID: DFS-JP
 	# ref: http://www.postel.go.id/content/ID/regulasi/standardisasi/kepdir/bwa%205,8%20ghz.pdf
-	(2402 - 2482 @ 40), (20)
-	(5735 - 5815 @ 80), (23)
+	(2402 - 2482 @ 20), (20)
+	(5735 - 5815 @ 20), (23)
 
 country IE: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
@@ -584,6 +590,9 @@ country JP: DFS-JP
 	(5170 - 5250 @ 80), (20), AUTO-BW
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5490 - 5710 @ 160), (23), DFS
+	# 60 GHz band channels 2-4 at 10mW,
+	# ref: http://www.arib.or.jp/english/html/overview/doc/1-STD-T74v1_1.pdf
+	(59000 - 66000 @ 2160), (10 mW)
 
 country KE: DFS-JP
 	(2402 - 2482 @ 40), (20)
@@ -607,11 +616,11 @@ country KN: DFS-ETSI
 	(5735 - 5815 @ 80), (30)
 
 country KP: DFS-JP
-	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (20), AUTO-BW
-	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
-	(5490 - 5630 @ 80), (30), DFS
-	(5735 - 5815 @ 80), (30)
+	(2402 - 2482 @ 20), (20)
+	(5170 - 5250 @ 20), (20)
+	(5250 - 5330 @ 20), (20), DFS
+	(5490 - 5630 @ 20), (30), DFS
+	(5735 - 5815 @ 20), (30)
 
 country KR: DFS-JP
 	(2402 - 2482 @ 40), (20)
@@ -659,10 +668,10 @@ country LI: DFS-ETSI
 
 country LK: DFS-FCC
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (17)
-	(5250 - 5330 @ 80), (24), DFS
-	(5490 - 5730 @ 80), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 20), (17)
+	(5250 - 5330 @ 20), (24), DFS
+	(5490 - 5730 @ 20), (24), DFS
+	(5735 - 5835 @ 20), (30)
 
 # Source:
 # http://lca.org.ls/images/documents/lesotho_national_frequency_allocation_plan.pdf
@@ -751,11 +760,12 @@ country MN: DFS-FCC
 	(5490 - 5730 @ 160), (24), DFS
 	(5735 - 5835 @ 80), (30)
 
-country MO:
-	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 40), (23)
-	(5250 - 5330 @ 40), (23), DFS
-	(5735 - 5835 @ 40), (30)
+country MO: DFS-FCC
+	(2402 - 2482 @ 40), (23)
+	(5170 - 5250 @ 80), (23), AUTO-BW
+	(5250 - 5330 @ 80), (23), DFS, AUTO-BW
+	(5490 - 5730 @ 160), (30), DFS
+	(5735 - 5835 @ 80), (30)
 
 country MP: DFS-FCC
 	(2402 - 2472 @ 40), (30)
@@ -793,6 +803,14 @@ country MU: DFS-FCC
 	(5490 - 5730 @ 160), (24), DFS
 	(5735 - 5835 @ 80), (30)
 
+# Source:
+# http://www.cam.gov.mv/docs/tech_standards/TAM-TS-100-2004-WLAN.pdf
+country MV: DFS-ETSI
+	(2400 - 2483.5 @ 40), (100 mW)
+	(5150 - 5250 @ 80), (200 mW), AUTO-BW
+	(5250 - 5350 @ 80), (100 mW), DFS, AUTO-BW
+	(5725 - 5850 @ 80), (100 mW)
+
 country MW: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 80), (20), AUTO-BW
@@ -812,6 +830,11 @@ country MY: DFS-FCC
 	(5250 - 5330 @ 80), (23), DFS, AUTO-BW
 	(5735 - 5835 @ 80), (30)
 
+country NG: DFS-ETSI
+	(2402 - 2482 @ 40), (20)
+	(5250 - 5330 @ 80), (30), DFS
+	(5735 - 5835 @ 80), (30)
+
 country NI: DFS-FCC
 	(2402 - 2472 @ 40), (30)
 	(5170 - 5250 @ 80), (24), AUTO-BW
@@ -848,7 +871,7 @@ country NP: DFS-JP
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5735 - 5835 @ 80), (20)
 
-country NZ: DFS-FCC
+country NZ: DFS-ETSI
 	(2402 - 2482 @ 40), (30)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
@@ -971,10 +994,12 @@ country RS: DFS-ETSI
 
 country RU: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (20)
-	(5250 - 5330 @ 80), (20), DFS
-	(5650 - 5730 @ 80), (30), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 40), (20)
+	(5250 - 5330 @ 40), (20), DFS
+	(5650 - 5730 @ 40), (30), DFS
+	(5735 - 5835 @ 40), (30)
+	# 60 GHz band channels 1-4, ref: Changes to NLA 124_Order №129_22042015.pdf
+	(57000 - 66000 @ 2160), (40)
 
 country RW: DFS-FCC
 	(2402 - 2482 @ 40), (20)
@@ -1037,9 +1062,9 @@ country SR: DFS-ETSI
 
 country SV: DFS-FCC
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (17)
-	(5250 - 5330 @ 80), (23), DFS
-	(5735 - 5835 @ 80), (30)
+	(5170 - 5250 @ 20), (17)
+	(5250 - 5330 @ 20), (23), DFS
+	(5735 - 5835 @ 20), (30)
 
 country SY:
 	(2402 - 2482 @ 40), (20)
@@ -1099,6 +1124,10 @@ country TW: DFS-JP
 	(5650 - 5710 @ 40), (30), DFS
 	(5735 - 5835 @ 80), (30)
  
+country TZ:
+	(2402 - 2482 @ 40), (20)
+	(5735 - 5835 @ 80), (30)
+
 # Source:
 # #914 / 06 Sep 2007: http://www.ucrf.gov.ua/uk/doc/nkrz/1196068874
 # #1174 / 23 Oct 2008: http://www.nkrz.gov.ua/uk/activities/ruling/1225269361
@@ -1125,6 +1154,7 @@ country US: DFS-FCC
 	(2402 - 2472 @ 40), (30)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (23), DFS, AUTO-BW
+	(5490 - 5730 @ 160), (23), DFS
 	(5735 - 5835 @ 80), (30)
 	# 60g band
 	# reference: http://cfr.regstoday.com/47cfr15.aspx#47_CFR_15p255
@@ -1192,6 +1222,12 @@ country WF: DFS-ETSI
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5490 - 5710 @ 160), (27), DFS
 
+country WS: DFS-ETSI
+	(2402 - 2482 @ 40), (20)
+	(5170 - 5250 @ 40), (20)
+	(5250 - 5330 @ 40), (20), DFS
+	(5490 - 5710 @ 40), (27), DFS
+
 country YE:
 	(2402 - 2482 @ 40), (20)
 
diff --git a/package/kernel/mac80211/patches/001-fix_build.patch b/package/kernel/mac80211/patches/001-fix_build.patch
index 818983e..402649d 100644
--- a/package/kernel/mac80211/patches/001-fix_build.patch
+++ b/package/kernel/mac80211/patches/001-fix_build.patch
@@ -27,7 +27,7 @@
  	@set -e ; test -f .local-symbols || (						\
  	echo "/--------------"								;\
  	echo "| You shouldn't run make in the backports tree, but only in"		;\
-@@ -60,56 +62,60 @@ mrproper:
+@@ -60,57 +62,61 @@ mrproper:
  	echo "| (that isn't currently running.)"					;\
  	echo "\\--"									;\
  	false)
@@ -56,11 +56,12 @@
 -			done								\
 -		) > Kconfig.kernel							;\
 -		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
--			sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d')			;\
+-			sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
 -		test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 -		test "$$kver" != ""							;\
 -		kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
--		kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')"				;\
+-		kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')"				;\
+-		kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')"				;\
 -		print=0									;\
 -		for v in $$kvers ; do							\
 -			if [ "$$print" = "1" ] ; then					\
@@ -111,11 +112,12 @@
 +
 +Kconfig.versions: Kconfig.kernel
 +	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
-+		sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d')			;\
++		sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
 +	test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 +	test "$$kver" != ""							;\
 +	kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
-+	kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')"				;\
++	kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')"				;\
++	kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')"				;\
 +	print=0									;\
 +	for v in $$kvers ; do							\
 +		if [ "$$print" = "1" ] ; then					\
diff --git a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch b/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch
deleted file mode 100644
index d48a723..0000000
--- a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/backport-include/linux/debugfs.h
-+++ b/backport-include/linux/debugfs.h
-@@ -3,6 +3,7 @@
- #include_next <linux/debugfs.h>
- #include <linux/version.h>
- #include <generated/utsrelease.h>
-+#include <linux/device.h>
- 
- #if defined(CONFIG_DEBUG_FS)
- struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
diff --git a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch b/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
deleted file mode 100644
index e07f323..0000000
--- a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1858,6 +1858,13 @@ void ieee80211_remove_interfaces(struct
- 	}
- 	mutex_unlock(&local->iflist_mtx);
- 	unregister_netdevice_many(&unreg_list);
-+#if (!(LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,45) && \
-+       LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)) && \
-+     !(LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,9) && \
-+       LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)) && \
-+     (LINUX_VERSION_CODE < KERNEL_VERSION(3,16,0)))
-+	list_del(&unreg_list);
-+#endif
- 
- 	list_for_each_entry_safe(sdata, tmp, &wdev_list, list) {
- 		list_del(&sdata->list);
diff --git a/package/kernel/mac80211/patches/020-add_mpls_h.patch b/package/kernel/mac80211/patches/020-add_mpls_h.patch
deleted file mode 100644
index e5310bc..0000000
--- a/package/kernel/mac80211/patches/020-add_mpls_h.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- /dev/null
-+++ b/include/uapi/linux/mpls.h
-@@ -0,0 +1,34 @@
-+#ifndef _UAPI_MPLS_H
-+#define _UAPI_MPLS_H
-+
-+#include <linux/types.h>
-+#include <asm/byteorder.h>
-+
-+/* Reference: RFC 5462, RFC 3032
-+ *
-+ *  0                   1                   2                   3
-+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * |                Label                  | TC  |S|       TTL     |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ *
-+ *	Label:  Label Value, 20 bits
-+ *	TC:     Traffic Class field, 3 bits
-+ *	S:      Bottom of Stack, 1 bit
-+ *	TTL:    Time to Live, 8 bits
-+ */
-+
-+struct mpls_label {
-+	__be32 entry;
-+};
-+
-+#define MPLS_LS_LABEL_MASK      0xFFFFF000
-+#define MPLS_LS_LABEL_SHIFT     12
-+#define MPLS_LS_TC_MASK         0x00000E00
-+#define MPLS_LS_TC_SHIFT        9
-+#define MPLS_LS_S_MASK          0x00000100
-+#define MPLS_LS_S_SHIFT         8
-+#define MPLS_LS_TTL_MASK        0x000000FF
-+#define MPLS_LS_TTL_SHIFT       0
-+
-+#endif /* _UAPI_MPLS_H */
diff --git a/package/kernel/mac80211/patches/020-backports-do-not-add-debugfs_create_devm_seqfile-on-.patch b/package/kernel/mac80211/patches/020-backports-do-not-add-debugfs_create_devm_seqfile-on-.patch
new file mode 100644
index 0000000..97f678c
--- /dev/null
+++ b/package/kernel/mac80211/patches/020-backports-do-not-add-debugfs_create_devm_seqfile-on-.patch
@@ -0,0 +1,33 @@
+From e15e9231e7a9f81f5264d294fd3fd96a20d92516 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 25 Jul 2015 15:19:17 +0200
+Subject: [PATCH 3/3] backports: do not add debugfs_create_devm_seqfile() on
+ recent kernel versions
+
+An #ifdef for the kernel version was missing around the header of
+debugfs_create_devm_seqfile() and the LINUX_BACKPORT() was also not
+done.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ backport/backport-include/linux/debugfs.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/backport-include/linux/debugfs.h
++++ b/backport-include/linux/debugfs.h
+@@ -5,6 +5,8 @@
+ #include <linux/device.h>
+ #include <generated/utsrelease.h>
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
++#define debugfs_create_devm_seqfile LINUX_BACKPORT(debugfs_create_devm_seqfile)
+ #if defined(CONFIG_DEBUG_FS)
+ struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
+ 					   struct dentry *parent,
+@@ -20,5 +22,6 @@ static inline struct dentry *debugfs_cre
+ 	return ERR_PTR(-ENODEV);
+ }
+ #endif /* CONFIG_DEBUG_FS */
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) */
+ 
+ #endif /* __BACKPORT_DEBUGFS_H_ */
diff --git a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch b/package/kernel/mac80211/patches/045-bcma-from-4.1.patch
deleted file mode 100644
index dce217f..0000000
--- a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- a/drivers/bcma/driver_pci.c
-+++ b/drivers/bcma/driver_pci.c
-@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
- }
- EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
- 
--int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
--			  bool enable)
--{
--	struct pci_dev *pdev;
--	u32 coremask, tmp;
--	int err = 0;
--
--	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
--		/* This bcma device is not on a PCI host-bus. So the IRQs are
--		 * not routed through the PCI core.
--		 * So we must not enable routing through the PCI core. */
--		goto out;
--	}
--
--	pdev = bus->host_pci;
--
--	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
--	if (err)
--		goto out;
--
--	coremask = BIT(core->core_index) << 8;
--	if (enable)
--		tmp |= coremask;
--	else
--		tmp &= ~coremask;
--
--	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
--
--out:
--	return err;
--}
--EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
--
- static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
- {
- 	u32 w;
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus
- 		bcma_core_pci_down(&bus->drv_pci[0]);
- }
- EXPORT_SYMBOL_GPL(bcma_host_pci_down);
-+
-+/* See also si_pci_setup */
-+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-+			  bool enable)
-+{
-+	struct pci_dev *pdev;
-+	u32 coremask, tmp;
-+	int err = 0;
-+
-+	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-+		/* This bcma device is not on a PCI host-bus. So the IRQs are
-+		 * not routed through the PCI core.
-+		 * So we must not enable routing through the PCI core. */
-+		goto out;
-+	}
-+
-+	pdev = bus->host_pci;
-+
-+	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-+	if (err)
-+		goto out;
-+
-+	coremask = BIT(core->core_index) << 8;
-+	if (enable)
-+		tmp |= coremask;
-+	else
-+		tmp &= ~coremask;
-+
-+	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-+
-+out:
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct
- 	switch (dev->dev->bus_type) {
- #ifdef CPTCFG_B43_BCMA
- 	case B43_BUS_BCMA:
--		bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
-+		bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
- 				      dev->dev->bdev, true);
- 		bcma_host_pci_up(dev->dev->bdev->bus);
- 		break;
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
-@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
- 	 * Configure pci/pcmcia here instead of in brcms_c_attach()
- 	 * to allow mfg hotswap:  down, hotswap (chip power cycle), up.
- 	 */
--	bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
-+	bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
- 			      true);
- 
- 	/*
diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
index d307949..4fbab23 100644
--- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
+++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
@@ -1,6 +1,6 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -344,40 +344,3 @@ USB_CDC_PHONET=
+@@ -449,43 +449,6 @@ USB_CDC_PHONET=
  USB_IPHETH=
  USB_SIERRA_NET=
  USB_VL600=
@@ -32,26 +32,18 @@
 -BCMA_BLOCKIO=
 -BCMA_HOST_PCI_POSSIBLE=
 -BCMA_HOST_PCI=
--BCMA_DRIVER_PCI_HOSTMODE=
 -BCMA_HOST_SOC=
 -BCMA_DRIVER_PCI=
+-BCMA_DRIVER_PCI_HOSTMODE=
 -BCMA_DRIVER_MIPS=
 -BCMA_SFLASH=
 -BCMA_NFLASH=
 -BCMA_DRIVER_GMAC_CMN=
 -BCMA_DRIVER_GPIO=
 -BCMA_DEBUG=
---- a/Makefile.kernel
-+++ b/Makefile.kernel
-@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
- obj-$(CPTCFG_WLAN) += drivers/net/wireless/
- #obj-$(CPTCFG_BT) += net/bluetooth/
- #obj-$(CPTCFG_BT) += drivers/bluetooth/
--obj-$(CPTCFG_SSB) += drivers/ssb/
--obj-$(CPTCFG_BCMA) += drivers/bcma/
- #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
- obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
- #obj-$(CPTCFG_NFC) += net/nfc/
+ NFC=
+ NFC_DIGITAL=
+ NFC_NCI=
 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
 @@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
@@ -63,7 +55,7 @@
  	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
  #else
  	return bus->chipco.dev;
-@@ -4907,7 +4907,7 @@ static int b43_wireless_core_init(struct
+@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct
  	}
  	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
  		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
@@ -116,12 +108,23 @@
 --- a/Kconfig.sources
 +++ b/Kconfig.sources
 @@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele
- #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
  source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
  
 -source "$BACKPORT_DIR/drivers/ssb/Kconfig"
 -source "$BACKPORT_DIR/drivers/bcma/Kconfig"
 -
- #source "$BACKPORT_DIR/net/nfc/Kconfig"
+ source "$BACKPORT_DIR/net/nfc/Kconfig"
  
- #source "$BACKPORT_DIR/drivers/media/Kconfig"
+ source "$BACKPORT_DIR/drivers/media/Kconfig"
+--- a/Makefile.kernel
++++ b/Makefile.kernel
+@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
+ obj-$(CPTCFG_BT) += net/bluetooth/
+ obj-$(CPTCFG_BT) += drivers/bluetooth/
+-obj-$(CPTCFG_SSB) += drivers/ssb/
+-obj-$(CPTCFG_BCMA) += drivers/bcma/
+ obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
+ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
+ obj-$(CPTCFG_NFC) += net/nfc/
diff --git a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch b/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch
deleted file mode 100644
index 85c5280..0000000
--- a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/backport-include/linux/wait.h
-+++ b/backport-include/linux/wait.h
-@@ -23,7 +23,7 @@ backport_wait_on_bit_io(void *word, int
- 
- #endif
- 
--#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- #define WQ_FLAG_WOKEN		0x02
- 
- #define wait_woken LINUX_BACKPORT(wait_woken)
---- a/compat/backport-3.19.c
-+++ b/compat/backport-3.19.c
-@@ -15,6 +15,7 @@
- #include <linux/netdevice.h>
- #include <linux/debugfs.h>
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- static inline bool is_kthread_should_stop(void)
- {
- 	return (current->flags & PF_KTHREAD) && kthread_should_stop();
-@@ -79,6 +80,7 @@ int woken_wake_function(wait_queue_t *wa
- 	return default_wake_function(wait, mode, sync, key);
- }
- EXPORT_SYMBOL(woken_wake_function);
-+#endif
- 
- #ifdef __BACKPORT_NETDEV_RSS_KEY_FILL
- u8 netdev_rss_key[NETDEV_RSS_KEY_LEN];
diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
new file mode 100644
index 0000000..07dde54
--- /dev/null
+++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
@@ -0,0 +1,376 @@
+--- a/net/mac80211/Kconfig
++++ b/net/mac80211/Kconfig
+@@ -5,8 +5,6 @@ config MAC80211
+ 	depends on CRYPTO
+ 	depends on CRYPTO_ARC4
+ 	depends on CRYPTO_AES
+-	select BPAUTO_CRYPTO_CCM
+-	depends on CRYPTO_GCM
+ 	depends on CRC32
+ 	select BPAUTO_AVERAGE
+ 	---help---
+--- a/net/mac80211/Makefile
++++ b/net/mac80211/Makefile
+@@ -15,9 +15,7 @@ mac80211-y := \
+ 	michael.o \
+ 	tkip.o \
+ 	aes_ccm.o \
+-	aes_gcm.o \
+ 	aes_cmac.o \
+-	aes_gmac.o \
+ 	cfg.o \
+ 	ethtool.o \
+ 	rx.o \
+--- a/net/mac80211/aes_ccm.c
++++ b/net/mac80211/aes_ccm.c
+@@ -13,89 +13,132 @@
+ #include <linux/types.h>
+ #include <linux/err.h>
+ #include <crypto/aead.h>
++#include <crypto/aes.h>
+ 
+ #include <net/mac80211.h>
+ #include "key.h"
+ #include "aes_ccm.h"
+ 
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
+-			       u8 *data, size_t data_len, u8 *mic,
+-			       size_t mic_len)
++static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0,
++			    u8 *a, u8 *b)
+ {
+-	struct scatterlist sg[3];
++	int i;
++
++	crypto_cipher_encrypt_one(tfm, b, b_0);
++
++	/* Extra Authenticate-only data (always two AES blocks) */
++	for (i = 0; i < AES_BLOCK_SIZE; i++)
++		aad[i] ^= b[i];
++	crypto_cipher_encrypt_one(tfm, b, aad);
++
++	aad += AES_BLOCK_SIZE;
++
++	for (i = 0; i < AES_BLOCK_SIZE; i++)
++		aad[i] ^= b[i];
++	crypto_cipher_encrypt_one(tfm, a, aad);
+ 
+-	char aead_req_data[sizeof(struct aead_request) +
+-			   crypto_aead_reqsize(tfm)]
+-		__aligned(__alignof__(struct aead_request));
+-	struct aead_request *aead_req = (void *) aead_req_data;
++	/* Mask out bits from auth-only-b_0 */
++	b_0[0] &= 0x07;
+ 
+-	memset(aead_req, 0, sizeof(aead_req_data));
++	/* S_0 is used to encrypt T (= MIC) */
++	b_0[14] = 0;
++	b_0[15] = 0;
++	crypto_cipher_encrypt_one(tfm, s_0, b_0);
++}
+ 
+-	sg_init_table(sg, 3);
+-	sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
+-	sg_set_buf(&sg[1], data, data_len);
+-	sg_set_buf(&sg[2], mic, mic_len);
+ 
+-	aead_request_set_tfm(aead_req, tfm);
+-	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
+-	aead_request_set_ad(aead_req, sg[0].length);
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
++			       u8 *data, size_t data_len, u8 *mic,
++			       size_t mic_len)
++{
++	int i, j, last_len, num_blocks;
++	u8 b[AES_BLOCK_SIZE];
++	u8 s_0[AES_BLOCK_SIZE];
++	u8 e[AES_BLOCK_SIZE];
++	u8 *pos, *cpos;
++
++	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++	last_len = data_len % AES_BLOCK_SIZE;
++	aes_ccm_prepare(tfm, b_0, aad, s_0, b, b);
++
++	/* Process payload blocks */
++	pos = data;
++	cpos = data;
++	for (j = 1; j <= num_blocks; j++) {
++		int blen = (j == num_blocks && last_len) ?
++			last_len : AES_BLOCK_SIZE;
++
++		/* Authentication followed by encryption */
++		for (i = 0; i < blen; i++)
++			b[i] ^= pos[i];
++		crypto_cipher_encrypt_one(tfm, b, b);
++
++		b_0[14] = (j >> 8) & 0xff;
++		b_0[15] = j & 0xff;
++		crypto_cipher_encrypt_one(tfm, e, b_0);
++		for (i = 0; i < blen; i++)
++			*cpos++ = *pos++ ^ e[i];
++	}
+ 
+-	crypto_aead_encrypt(aead_req);
++	for (i = 0; i < mic_len; i++)
++		mic[i] = b[i] ^ s_0[i];
+ }
+ 
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			      u8 *data, size_t data_len, u8 *mic,
+ 			      size_t mic_len)
+ {
+-	struct scatterlist sg[3];
+-	char aead_req_data[sizeof(struct aead_request) +
+-			   crypto_aead_reqsize(tfm)]
+-		__aligned(__alignof__(struct aead_request));
+-	struct aead_request *aead_req = (void *) aead_req_data;
+-
+-	if (data_len == 0)
+-		return -EINVAL;
+-
+-	memset(aead_req, 0, sizeof(aead_req_data));
+-
+-	sg_init_table(sg, 3);
+-	sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
+-	sg_set_buf(&sg[1], data, data_len);
+-	sg_set_buf(&sg[2], mic, mic_len);
+-
+-	aead_request_set_tfm(aead_req, tfm);
+-	aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0);
+-	aead_request_set_ad(aead_req, sg[0].length);
++	int i, j, last_len, num_blocks;
++	u8 *pos, *cpos;
++	u8 a[AES_BLOCK_SIZE];
++	u8 b[AES_BLOCK_SIZE];
++	u8 s_0[AES_BLOCK_SIZE];
++
++	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++	last_len = data_len % AES_BLOCK_SIZE;
++	aes_ccm_prepare(tfm, b_0, aad, s_0, a, b);
++
++	/* Process payload blocks */
++	cpos = data;
++	pos = data;
++	for (j = 1; j <= num_blocks; j++) {
++		int blen = (j == num_blocks && last_len) ?
++			last_len : AES_BLOCK_SIZE;
++
++		/* Decryption followed by authentication */
++		b_0[14] = (j >> 8) & 0xff;
++		b_0[15] = j & 0xff;
++		crypto_cipher_encrypt_one(tfm, b, b_0);
++		for (i = 0; i < blen; i++) {
++			*pos = *cpos++ ^ b[i];
++			a[i] ^= *pos++;
++		}
++		crypto_cipher_encrypt_one(tfm, a, a);
++	}
++
++	for (i = 0; i < mic_len; i++) {
++		if ((mic[i] ^ s_0[i]) != a[i])
++			return -1;
++	}
+ 
+-	return crypto_aead_decrypt(aead_req);
++	return 0;
+ }
+ 
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+-						    size_t key_len,
+-						    size_t mic_len)
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++						      size_t key_len,
++						      size_t mic_len)
+ {
+-	struct crypto_aead *tfm;
+-	int err;
++	struct crypto_cipher *tfm;
+ 
+-	tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
+-	if (IS_ERR(tfm))
+-		return tfm;
+-
+-	err = crypto_aead_setkey(tfm, key, key_len);
+-	if (err)
+-		goto free_aead;
+-	err = crypto_aead_setauthsize(tfm, mic_len);
+-	if (err)
+-		goto free_aead;
++	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
++	if (!IS_ERR(tfm))
++		crypto_cipher_setkey(tfm, key, key_len);
+ 
+ 	return tfm;
+-
+-free_aead:
+-	crypto_free_aead(tfm);
+-	return ERR_PTR(err);
+ }
+ 
+-void ieee80211_aes_key_free(struct crypto_aead *tfm)
++
++void ieee80211_aes_key_free(struct crypto_cipher *tfm)
+ {
+-	crypto_free_aead(tfm);
++	crypto_free_cipher(tfm);
+ }
+--- a/net/mac80211/aes_ccm.h
++++ b/net/mac80211/aes_ccm.h
+@@ -12,15 +12,15 @@
+ 
+ #include <linux/crypto.h>
+ 
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+-						    size_t key_len,
+-						    size_t mic_len);
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++						      size_t key_len,
++						      size_t mic_len);
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			       u8 *data, size_t data_len, u8 *mic,
+ 			       size_t mic_len);
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ 			      u8 *data, size_t data_len, u8 *mic,
+ 			      size_t mic_len);
+-void ieee80211_aes_key_free(struct crypto_aead *tfm);
++void ieee80211_aes_key_free(struct crypto_cipher *tfm);
+ 
+ #endif /* AES_CCM_H */
+--- a/net/mac80211/aes_gcm.h
++++ b/net/mac80211/aes_gcm.h
+@@ -11,12 +11,28 @@
+ 
+ #include <linux/crypto.h>
+ 
+-void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+-			       u8 *data, size_t data_len, u8 *mic);
+-int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+-			      u8 *data, size_t data_len, u8 *mic);
+-struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
+-							size_t key_len);
+-void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
++static inline void
++ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++			  u8 *data, size_t data_len, u8 *mic)
++{
++}
++
++static inline int
++ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++			  u8 *data, size_t data_len, u8 *mic)
++{
++    return -EOPNOTSUPP;
++}
++
++static inline struct crypto_aead *
++ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], size_t key_len)
++{
++    return NULL;
++}
++
++static inline void
++ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
++{
++}
+ 
+ #endif /* AES_GCM_H */
+--- a/net/mac80211/aes_gmac.h
++++ b/net/mac80211/aes_gmac.h
+@@ -11,10 +11,22 @@
+ 
+ #include <linux/crypto.h>
+ 
+-struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
+-						 size_t key_len);
+-int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
+-		       const u8 *data, size_t data_len, u8 *mic);
+-void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
++static inline struct crypto_aead *
++ieee80211_aes_gmac_key_setup(const u8 key[], size_t key_len)
++{
++	return NULL;
++}
++
++static inline int
++ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
++		   const u8 *data, size_t data_len, u8 *mic)
++{
++	return -EOPNOTSUPP;
++}
++
++static inline void
++ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
++{
++}
+ 
+ #endif /* AES_GMAC_H */
+--- a/net/mac80211/key.h
++++ b/net/mac80211/key.h
+@@ -84,7 +84,7 @@ struct ieee80211_key {
+ 			 * Management frames.
+ 			 */
+ 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
+-			struct crypto_aead *tfm;
++			struct crypto_cipher *tfm;
+ 			u32 replays; /* dot11RSNAStatsCCMPReplays */
+ 		} ccmp;
+ 		struct {
+--- a/net/mac80211/wpa.c
++++ b/net/mac80211/wpa.c
+@@ -304,7 +304,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+ }
+ 
+ 
+-static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
++static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad,
++				u16 data_len)
+ {
+ 	__le16 mask_fc;
+ 	int a4_included, mgmt;
+@@ -334,14 +335,8 @@ static void ccmp_special_blocks(struct s
+ 	else
+ 		qos_tid = 0;
+ 
+-	/* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
+-	 * mode authentication are not allowed to collide, yet both are derived
+-	 * from this vector b_0. We only set L := 1 here to indicate that the
+-	 * data size can be represented in (L+1) bytes. The CCM layer will take
+-	 * care of storing the data length in the top (L+1) bytes and setting
+-	 * and clearing the other bits as is required to derive the two IVs.
+-	 */
+-	b_0[0] = 0x1;
++	/* First block, b_0 */
++	b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
+ 
+ 	/* Nonce: Nonce Flags | A2 | PN
+ 	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
+@@ -349,6 +344,8 @@ static void ccmp_special_blocks(struct s
+ 	b_0[1] = qos_tid | (mgmt << 4);
+ 	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
+ 	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
++	/* l(m) */
++	put_unaligned_be16(data_len, &b_0[14]);
+ 
+ 	/* AAD (extra authenticate-only data) / masked 802.11 header
+ 	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
+@@ -460,7 +457,7 @@ static int ccmp_encrypt_skb(struct ieee8
+ 		return 0;
+ 
+ 	pos += IEEE80211_CCMP_HDR_LEN;
+-	ccmp_special_blocks(skb, pn, b_0, aad);
++	ccmp_special_blocks(skb, pn, b_0, aad, len);
+ 	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
+ 				  skb_put(skb, mic_len), mic_len);
+ 
+@@ -531,7 +528,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+ 			u8 aad[2 * AES_BLOCK_SIZE];
+ 			u8 b_0[AES_BLOCK_SIZE];
+ 			/* hardware didn't decrypt/verify MIC */
+-			ccmp_special_blocks(skb, pn, b_0, aad);
++			ccmp_special_blocks(skb, pn, b_0, aad, data_len);
+ 
+ 			if (ieee80211_aes_ccm_decrypt(
+ 				    key->u.ccmp.tfm, b_0, aad,
diff --git a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch b/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch
deleted file mode 100644
index ceca952..0000000
--- a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch
+++ /dev/null
@@ -1,2055 +0,0 @@
-This patch reverts the following commits from wireless-testing:
-
-8ade538bf39b1ee53418528fdacd36b8e65621b9
-56c52da2d554f081e8fce58ecbcf6a40c605b95b
-2b2ba0db1c820d04d5143452d70012cd44d7b578
-00b9cfa3ff38401bd70c34b250ca13e5ea347b4a
-4f031fa9f188b2b0641ac20087d9e16bcfb4e49d
-6e1ee5d2e9e411892b5d84e3ea93e3fc88ac786c
-30ef7ef9672d92ab2cac37f60a31955c118321e7
-f359d3fe832e49eeec2232b2af5a9e3aee6b4862 (only the changes in aes_cmac.{c,h})
-7ec7c4a9a686c608315739ab6a2b0527a240883c
----
-
---- a/include/linux/ieee80211.h
-+++ b/include/linux/ieee80211.h
-@@ -1017,15 +1017,6 @@ struct ieee80211_mmie {
- 	u8 mic[8];
- } __packed;
- 
--/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */
--struct ieee80211_mmie_16 {
--	u8 element_id;
--	u8 length;
--	__le16 key_id;
--	u8 sequence_number[6];
--	u8 mic[16];
--} __packed;
--
- struct ieee80211_vendor_ie {
- 	u8 element_id;
- 	u8 len;
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -1306,8 +1306,8 @@ struct ieee80211_vif *wdev_to_ieee80211_
-  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
-  *	that the key is pairwise rather then a shared key.
-  * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a
-- *	CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames
-- *	(MFP) to be done in software.
-+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
-+ *	be done in software.
-  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
-  *	if space should be prepared for the IV, but the IV
-  *	itself should not be generated. Do not set together with
-@@ -1322,7 +1322,7 @@ struct ieee80211_vif *wdev_to_ieee80211_
-  *	RX, if your crypto engine can't deal with TX you can also set the
-  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
-  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
-- *	driver for a CCMP/GCMP key to indicate that is requires IV generation
-+ *	driver for a CCMP key to indicate that is requires IV generation
-  *	only for managment frames (MFP).
-  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
-  *	driver for a key to indicate that sufficient tailroom must always
-@@ -4112,10 +4112,6 @@ void ieee80211_aes_cmac_calculate_k1_k2(
-  *	reverse order than in packet)
-  * @aes_cmac: PN data, most significant byte first (big endian,
-  *	reverse order than in packet)
-- * @aes_gmac: PN data, most significant byte first (big endian,
-- *	reverse order than in packet)
-- * @gcmp: PN data, most significant byte first (big endian,
-- *	reverse order than in packet)
-  */
- struct ieee80211_key_seq {
- 	union {
-@@ -4129,12 +4125,6 @@ struct ieee80211_key_seq {
- 		struct {
- 			u8 pn[6];
- 		} aes_cmac;
--		struct {
--			u8 pn[6];
--		} aes_gmac;
--		struct {
--			u8 pn[6];
--		} gcmp;
- 	};
- };
- 
-@@ -4159,7 +4149,7 @@ void ieee80211_get_key_tx_seq(struct iee
-  * ieee80211_get_key_rx_seq - get key RX sequence counter
-  *
-  * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
-  *	the value on TID 0 is also used for non-QoS frames. For
-  *	CMAC, only TID 0 is valid.
-  * @seq: buffer to receive the sequence data
-@@ -4195,7 +4185,7 @@ void ieee80211_set_key_tx_seq(struct iee
-  * ieee80211_set_key_rx_seq - set key RX sequence counter
-  *
-  * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
-  *	the value on TID 0 is also used for non-QoS frames. For
-  *	CMAC, only TID 0 is valid.
-  * @seq: new sequence data
---- a/net/mac80211/Kconfig
-+++ b/net/mac80211/Kconfig
-@@ -5,8 +5,6 @@ config MAC80211
- 	depends on CRYPTO
- 	depends on CRYPTO_ARC4
- 	depends on CRYPTO_AES
--	select BPAUTO_CRYPTO_CCM
--	depends on CRYPTO_GCM
- 	depends on CRC32
- 	select BPAUTO_AVERAGE
- 	---help---
---- a/net/mac80211/Makefile
-+++ b/net/mac80211/Makefile
-@@ -15,9 +15,7 @@ mac80211-y := \
- 	michael.o \
- 	tkip.o \
- 	aes_ccm.o \
--	aes_gcm.o \
- 	aes_cmac.o \
--	aes_gmac.o \
- 	cfg.o \
- 	ethtool.o \
- 	rx.o \
---- a/net/mac80211/aes_ccm.c
-+++ b/net/mac80211/aes_ccm.c
-@@ -2,8 +2,6 @@
-  * Copyright 2003-2004, Instant802 Networks, Inc.
-  * Copyright 2005-2006, Devicescape Software, Inc.
-  *
-- * Rewrite: Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
-- *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-@@ -19,82 +17,134 @@
- #include "key.h"
- #include "aes_ccm.h"
- 
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic,
--			       size_t mic_len)
-+static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *scratch, u8 *a)
-+{
-+	int i;
-+	u8 *b_0, *aad, *b, *s_0;
-+
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+	aad = scratch + 4 * AES_BLOCK_SIZE;
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+
-+	crypto_cipher_encrypt_one(tfm, b, b_0);
-+
-+	/* Extra Authenticate-only data (always two AES blocks) */
-+	for (i = 0; i < AES_BLOCK_SIZE; i++)
-+		aad[i] ^= b[i];
-+	crypto_cipher_encrypt_one(tfm, b, aad);
-+
-+	aad += AES_BLOCK_SIZE;
-+
-+	for (i = 0; i < AES_BLOCK_SIZE; i++)
-+		aad[i] ^= b[i];
-+	crypto_cipher_encrypt_one(tfm, a, aad);
-+
-+	/* Mask out bits from auth-only-b_0 */
-+	b_0[0] &= 0x07;
-+
-+	/* S_0 is used to encrypt T (= MIC) */
-+	b_0[14] = 0;
-+	b_0[15] = 0;
-+	crypto_cipher_encrypt_one(tfm, s_0, b_0);
-+}
-+
-+
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			       u8 *data, size_t data_len,
-+			       u8 *cdata, u8 *mic)
- {
--	struct scatterlist assoc, pt, ct[2];
-+	int i, j, last_len, num_blocks;
-+	u8 *pos, *cpos, *b, *s_0, *e, *b_0;
- 
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *) aead_req_data;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, mic_len);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, &pt, ct, data_len, b_0);
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+	e = scratch + 2 * AES_BLOCK_SIZE;
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+	last_len = data_len % AES_BLOCK_SIZE;
-+	aes_ccm_prepare(tfm, scratch, b);
-+
-+	/* Process payload blocks */
-+	pos = data;
-+	cpos = cdata;
-+	for (j = 1; j <= num_blocks; j++) {
-+		int blen = (j == num_blocks && last_len) ?
-+			last_len : AES_BLOCK_SIZE;
-+
-+		/* Authentication followed by encryption */
-+		for (i = 0; i < blen; i++)
-+			b[i] ^= pos[i];
-+		crypto_cipher_encrypt_one(tfm, b, b);
-+
-+		b_0[14] = (j >> 8) & 0xff;
-+		b_0[15] = j & 0xff;
-+		crypto_cipher_encrypt_one(tfm, e, b_0);
-+		for (i = 0; i < blen; i++)
-+			*cpos++ = *pos++ ^ e[i];
-+	}
- 
--	crypto_aead_encrypt(aead_req);
-+	for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++)
-+		mic[i] = b[i] ^ s_0[i];
- }
- 
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic,
--			      size_t mic_len)
-+
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			      u8 *cdata, size_t data_len, u8 *mic, u8 *data)
- {
--	struct scatterlist assoc, pt, ct[2];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *) aead_req_data;
--
--	if (data_len == 0)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, mic_len);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, ct, &pt, data_len + mic_len, b_0);
-+	int i, j, last_len, num_blocks;
-+	u8 *pos, *cpos, *b, *s_0, *a, *b_0;
-+
-+	b = scratch;
-+	s_0 = scratch + AES_BLOCK_SIZE;
-+	a = scratch + 2 * AES_BLOCK_SIZE;
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+	num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+	last_len = data_len % AES_BLOCK_SIZE;
-+	aes_ccm_prepare(tfm, scratch, a);
-+
-+	/* Process payload blocks */
-+	cpos = cdata;
-+	pos = data;
-+	for (j = 1; j <= num_blocks; j++) {
-+		int blen = (j == num_blocks && last_len) ?
-+			last_len : AES_BLOCK_SIZE;
-+
-+		/* Decryption followed by authentication */
-+		b_0[14] = (j >> 8) & 0xff;
-+		b_0[15] = j & 0xff;
-+		crypto_cipher_encrypt_one(tfm, b, b_0);
-+		for (i = 0; i < blen; i++) {
-+			*pos = *cpos++ ^ b[i];
-+			a[i] ^= *pos++;
-+		}
-+		crypto_cipher_encrypt_one(tfm, a, a);
-+	}
-+
-+	for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) {
-+		if ((mic[i] ^ s_0[i]) != a[i])
-+			return -1;
-+	}
- 
--	return crypto_aead_decrypt(aead_req);
-+	return 0;
- }
- 
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
--						    size_t key_len,
--						    size_t mic_len)
-+
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
- {
--	struct crypto_aead *tfm;
--	int err;
-+	struct crypto_cipher *tfm;
- 
--	tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, mic_len);
--	if (!err)
--		return tfm;
-+	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
-+	if (!IS_ERR(tfm))
-+		crypto_cipher_setkey(tfm, key, WLAN_KEY_LEN_CCMP);
- 
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
-+	return tfm;
- }
- 
--void ieee80211_aes_key_free(struct crypto_aead *tfm)
-+
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm)
- {
--	crypto_free_aead(tfm);
-+	crypto_free_cipher(tfm);
- }
---- a/net/mac80211/aes_ccm.h
-+++ b/net/mac80211/aes_ccm.h
-@@ -12,15 +12,13 @@
- 
- #include <linux/crypto.h>
- 
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
--						    size_t key_len,
--						    size_t mic_len);
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic,
--			       size_t mic_len);
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic,
--			      size_t mic_len);
--void ieee80211_aes_key_free(struct crypto_aead *tfm);
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]);
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			       u8 *data, size_t data_len,
-+			       u8 *cdata, u8 *mic);
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+			      u8 *cdata, size_t data_len,
-+			      u8 *mic, u8 *data);
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm);
- 
- #endif /* AES_CCM_H */
---- a/net/mac80211/aes_cmac.c
-+++ b/net/mac80211/aes_cmac.c
-@@ -18,8 +18,8 @@
- #include "key.h"
- #include "aes_cmac.h"
- 
-+#define AES_CMAC_KEY_LEN 16
- #define CMAC_TLEN 8 /* CMAC TLen = 64 bits (8 octets) */
--#define CMAC_TLEN_256 16 /* CMAC TLen = 128 bits (16 octets) */
- #define AAD_LEN 20
- 
- 
-@@ -35,9 +35,9 @@ static void gf_mulx(u8 *pad)
- 		pad[AES_BLOCK_SIZE - 1] ^= 0x87;
- }
- 
--static void aes_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
--			    const u8 *addr[], const size_t *len, u8 *mac,
--			    size_t mac_len)
-+
-+static void aes_128_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
-+				const u8 *addr[], const size_t *len, u8 *mac)
- {
- 	u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE];
- 	const u8 *pos, *end;
-@@ -88,7 +88,7 @@ static void aes_cmac_vector(struct crypt
- 	for (i = 0; i < AES_BLOCK_SIZE; i++)
- 		pad[i] ^= cbc[i];
- 	crypto_cipher_encrypt_one(tfm, pad, pad);
--	memcpy(mac, pad, mac_len);
-+	memcpy(mac, pad, CMAC_TLEN);
- }
- 
- 
-@@ -107,35 +107,17 @@ void ieee80211_aes_cmac(struct crypto_ci
- 	addr[2] = zero;
- 	len[2] = CMAC_TLEN;
- 
--	aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN);
-+	aes_128_cmac_vector(tfm, 3, addr, len, mic);
- }
- 
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
--			    const u8 *data, size_t data_len, u8 *mic)
--{
--	const u8 *addr[3];
--	size_t len[3];
--	u8 zero[CMAC_TLEN_256];
--
--	memset(zero, 0, CMAC_TLEN_256);
--	addr[0] = aad;
--	len[0] = AAD_LEN;
--	addr[1] = data;
--	len[1] = data_len - CMAC_TLEN_256;
--	addr[2] = zero;
--	len[2] = CMAC_TLEN_256;
--
--	aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN_256);
--}
- 
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
--						   size_t key_len)
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[])
- {
- 	struct crypto_cipher *tfm;
- 
- 	tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
- 	if (!IS_ERR(tfm))
--		crypto_cipher_setkey(tfm, key, key_len);
-+		crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN);
- 
- 	return tfm;
- }
---- a/net/mac80211/aes_cmac.h
-+++ b/net/mac80211/aes_cmac.h
-@@ -11,12 +11,9 @@
- 
- #include <linux/crypto.h>
- 
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
--						   size_t key_len);
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[]);
- void ieee80211_aes_cmac(struct crypto_cipher *tfm, const u8 *aad,
- 			const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
--			    const u8 *data, size_t data_len, u8 *mic);
- void ieee80211_aes_cmac_key_free(struct crypto_cipher *tfm);
- 
- #endif /* AES_CMAC_H */
---- a/net/mac80211/aes_gcm.c
-+++ /dev/null
-@@ -1,95 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gcm.h"
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist assoc, pt, ct[2];
--
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, &pt, ct, data_len, j_0);
--
--	crypto_aead_encrypt(aead_req);
--}
--
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist assoc, pt, ct[2];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--
--	if (data_len == 0)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	sg_init_one(&pt, data, data_len);
--	sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
--	sg_init_table(ct, 2);
--	sg_set_buf(&ct[0], data, data_len);
--	sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, &assoc, assoc.length);
--	aead_request_set_crypt(aead_req, ct, &pt,
--			       data_len + IEEE80211_GCMP_MIC_LEN, j_0);
--
--	return crypto_aead_decrypt(aead_req);
--}
--
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
--							size_t key_len)
--{
--	struct crypto_aead *tfm;
--	int err;
--
--	tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, IEEE80211_GCMP_MIC_LEN);
--	if (!err)
--		return tfm;
--
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
--}
--
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
--{
--	crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gcm.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GCM_H
--#define AES_GCM_H
--
--#include <linux/crypto.h>
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			       u8 *data, size_t data_len, u8 *mic);
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
--			      u8 *data, size_t data_len, u8 *mic);
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
--							size_t key_len);
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GCM_H */
---- a/net/mac80211/aes_gmac.c
-+++ /dev/null
-@@ -1,84 +0,0 @@
--/*
-- * AES-GMAC for IEEE 802.11 BIP-GMAC-128 and BIP-GMAC-256
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gmac.h"
--
--#define GMAC_MIC_LEN 16
--#define GMAC_NONCE_LEN 12
--#define AAD_LEN 20
--
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
--		       const u8 *data, size_t data_len, u8 *mic)
--{
--	struct scatterlist sg[3], ct[1];
--	char aead_req_data[sizeof(struct aead_request) +
--			   crypto_aead_reqsize(tfm)]
--		__aligned(__alignof__(struct aead_request));
--	struct aead_request *aead_req = (void *)aead_req_data;
--	u8 zero[GMAC_MIC_LEN], iv[AES_BLOCK_SIZE];
--
--	if (data_len < GMAC_MIC_LEN)
--		return -EINVAL;
--
--	memset(aead_req, 0, sizeof(aead_req_data));
--
--	memset(zero, 0, GMAC_MIC_LEN);
--	sg_init_table(sg, 3);
--	sg_set_buf(&sg[0], aad, AAD_LEN);
--	sg_set_buf(&sg[1], data, data_len - GMAC_MIC_LEN);
--	sg_set_buf(&sg[2], zero, GMAC_MIC_LEN);
--
--	memcpy(iv, nonce, GMAC_NONCE_LEN);
--	memset(iv + GMAC_NONCE_LEN, 0, sizeof(iv) - GMAC_NONCE_LEN);
--	iv[AES_BLOCK_SIZE - 1] = 0x01;
--
--	sg_init_table(ct, 1);
--	sg_set_buf(&ct[0], mic, GMAC_MIC_LEN);
--
--	aead_request_set_tfm(aead_req, tfm);
--	aead_request_set_assoc(aead_req, sg, AAD_LEN + data_len);
--	aead_request_set_crypt(aead_req, NULL, ct, 0, iv);
--
--	crypto_aead_encrypt(aead_req);
--
--	return 0;
--}
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
--						 size_t key_len)
--{
--	struct crypto_aead *tfm;
--	int err;
--
--	tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
--	if (IS_ERR(tfm))
--		return tfm;
--
--	err = crypto_aead_setkey(tfm, key, key_len);
--	if (!err)
--		return tfm;
--	if (!err)
--		err = crypto_aead_setauthsize(tfm, GMAC_MIC_LEN);
--
--	crypto_free_aead(tfm);
--	return ERR_PTR(err);
--}
--
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
--{
--	crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gmac.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--/*
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GMAC_H
--#define AES_GMAC_H
--
--#include <linux/crypto.h>
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
--						 size_t key_len);
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
--		       const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GMAC_H */
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -162,13 +162,8 @@ static int ieee80211_add_key(struct wiph
- 			return -EINVAL;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- 	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
- 		break;
- 	default:
- 		cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type);
-@@ -353,7 +348,6 @@ static int ieee80211_get_key(struct wiph
- 		params.seq_len = 6;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- 		seq[0] = pn64;
- 		seq[1] = pn64 >> 8;
-@@ -365,35 +359,10 @@ static int ieee80211_get_key(struct wiph
- 		params.seq_len = 6;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		seq[0] = pn64;
- 		seq[1] = pn64 >> 8;
- 		seq[2] = pn64 >> 16;
--		seq[3] = pn64 >> 24;
--		seq[4] = pn64 >> 32;
--		seq[5] = pn64 >> 40;
--		params.seq = seq;
--		params.seq_len = 6;
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
--		seq[0] = pn64;
--		seq[1] = pn64 >> 8;
--		seq[2] = pn64 >> 16;
--		seq[3] = pn64 >> 24;
--		seq[4] = pn64 >> 32;
--		seq[5] = pn64 >> 40;
--		params.seq = seq;
--		params.seq_len = 6;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = atomic64_read(&key->u.gcmp.tx_pn);
--		seq[0] = pn64;
--		seq[1] = pn64 >> 8;
--		seq[2] = pn64 >> 16;
- 		seq[3] = pn64 >> 24;
- 		seq[4] = pn64 >> 32;
- 		seq[5] = pn64 >> 40;
---- a/net/mac80211/debugfs_key.c
-+++ b/net/mac80211/debugfs_key.c
-@@ -94,33 +94,17 @@ static ssize_t key_tx_spec_read(struct f
- 				key->u.tkip.tx.iv16);
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn = atomic64_read(&key->u.ccmp.tx_pn);
- 		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- 				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- 				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- 				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- 				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn = atomic64_read(&key->u.aes_gmac.tx_pn);
--		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
--				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
--				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn = atomic64_read(&key->u.gcmp.tx_pn);
--		len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
--				(u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
--				(u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -150,7 +134,6 @@ static ssize_t key_rx_spec_read(struct f
- 		len = p - buf;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
- 			rpn = key->u.ccmp.rx_pn[i];
- 			p += scnprintf(p, sizeof(buf)+buf-p,
-@@ -161,7 +144,6 @@ static ssize_t key_rx_spec_read(struct f
- 		len = p - buf;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		rpn = key->u.aes_cmac.rx_pn;
- 		p += scnprintf(p, sizeof(buf)+buf-p,
- 			       "%02x%02x%02x%02x%02x%02x\n",
-@@ -169,26 +151,6 @@ static ssize_t key_rx_spec_read(struct f
- 			       rpn[3], rpn[4], rpn[5]);
- 		len = p - buf;
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		rpn = key->u.aes_gmac.rx_pn;
--		p += scnprintf(p, sizeof(buf)+buf-p,
--			       "%02x%02x%02x%02x%02x%02x\n",
--			       rpn[0], rpn[1], rpn[2],
--			       rpn[3], rpn[4], rpn[5]);
--		len = p - buf;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
--			rpn = key->u.gcmp.rx_pn[i];
--			p += scnprintf(p, sizeof(buf)+buf-p,
--				       "%02x%02x%02x%02x%02x%02x\n",
--				       rpn[0], rpn[1], rpn[2],
--				       rpn[3], rpn[4], rpn[5]);
--		}
--		len = p - buf;
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -205,23 +167,12 @@ static ssize_t key_replays_read(struct f
- 
- 	switch (key->conf.cipher) {
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n",
- 				key->u.aes_cmac.replays);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n",
--				key->u.aes_gmac.replays);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n", key->u.gcmp.replays);
--		break;
- 	default:
- 		return 0;
- 	}
-@@ -238,15 +189,9 @@ static ssize_t key_icverrors_read(struct
- 
- 	switch (key->conf.cipher) {
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		len = scnprintf(buf, sizeof(buf), "%u\n",
- 				key->u.aes_cmac.icverrors);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		len = scnprintf(buf, sizeof(buf), "%u\n",
--				key->u.aes_gmac.icverrors);
--		break;
- 	default:
- 		return 0;
- 	}
---- a/net/mac80211/key.c
-+++ b/net/mac80211/key.c
-@@ -24,8 +24,6 @@
- #include "debugfs_key.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
- 
- 
- /**
-@@ -164,13 +162,7 @@ static int ieee80211_key_enable_hw_accel
- 	case WLAN_CIPHER_SUITE_WEP104:
- 	case WLAN_CIPHER_SUITE_TKIP:
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
- 		/* all of these we can do in software - if driver can */
- 		if (ret == 1)
- 			return 0;
-@@ -394,26 +386,7 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		 * Initialize AES key state here as an optimization so that
- 		 * it does not need to be initialized for every packet.
- 		 */
--		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
--			key_data, key_len, IEEE80211_CCMP_MIC_LEN);
--		if (IS_ERR(key->u.ccmp.tfm)) {
--			err = PTR_ERR(key->u.ccmp.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		key->conf.iv_len = IEEE80211_CCMP_256_HDR_LEN;
--		key->conf.icv_len = IEEE80211_CCMP_256_MIC_LEN;
--		for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
--			for (j = 0; j < IEEE80211_CCMP_256_PN_LEN; j++)
--				key->u.ccmp.rx_pn[i][j] =
--					seq[IEEE80211_CCMP_256_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
--			key_data, key_len, IEEE80211_CCMP_256_MIC_LEN);
-+		key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(key_data);
- 		if (IS_ERR(key->u.ccmp.tfm)) {
- 			err = PTR_ERR(key->u.ccmp.tfm);
- 			kfree(key);
-@@ -421,12 +394,8 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		}
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		key->conf.iv_len = 0;
--		if (cipher == WLAN_CIPHER_SUITE_AES_CMAC)
--			key->conf.icv_len = sizeof(struct ieee80211_mmie);
--		else
--			key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
-+		key->conf.icv_len = sizeof(struct ieee80211_mmie);
- 		if (seq)
- 			for (j = 0; j < IEEE80211_CMAC_PN_LEN; j++)
- 				key->u.aes_cmac.rx_pn[j] =
-@@ -436,51 +405,13 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 		 * it does not need to be initialized for every packet.
- 		 */
- 		key->u.aes_cmac.tfm =
--			ieee80211_aes_cmac_key_setup(key_data, key_len);
-+			ieee80211_aes_cmac_key_setup(key_data);
- 		if (IS_ERR(key->u.aes_cmac.tfm)) {
- 			err = PTR_ERR(key->u.aes_cmac.tfm);
- 			kfree(key);
- 			return ERR_PTR(err);
- 		}
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		key->conf.iv_len = 0;
--		key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
--		if (seq)
--			for (j = 0; j < IEEE80211_GMAC_PN_LEN; j++)
--				key->u.aes_gmac.rx_pn[j] =
--					seq[IEEE80211_GMAC_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.aes_gmac.tfm =
--			ieee80211_aes_gmac_key_setup(key_data, key_len);
--		if (IS_ERR(key->u.aes_gmac.tfm)) {
--			err = PTR_ERR(key->u.aes_gmac.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		key->conf.iv_len = IEEE80211_GCMP_HDR_LEN;
--		key->conf.icv_len = IEEE80211_GCMP_MIC_LEN;
--		for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
--			for (j = 0; j < IEEE80211_GCMP_PN_LEN; j++)
--				key->u.gcmp.rx_pn[i][j] =
--					seq[IEEE80211_GCMP_PN_LEN - j - 1];
--		/* Initialize AES key state here as an optimization so that
--		 * it does not need to be initialized for every packet.
--		 */
--		key->u.gcmp.tfm = ieee80211_aes_gcm_key_setup_encrypt(key_data,
--								      key_len);
--		if (IS_ERR(key->u.gcmp.tfm)) {
--			err = PTR_ERR(key->u.gcmp.tfm);
--			kfree(key);
--			return ERR_PTR(err);
--		}
--		break;
- 	default:
- 		if (cs) {
- 			size_t len = (seq_len > MAX_PN_LEN) ?
-@@ -502,24 +433,10 @@ ieee80211_key_alloc(u32 cipher, int idx,
- 
- static void ieee80211_key_free_common(struct ieee80211_key *key)
- {
--	switch (key->conf.cipher) {
--	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
-+	if (key->conf.cipher == WLAN_CIPHER_SUITE_CCMP)
- 		ieee80211_aes_key_free(key->u.ccmp.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-+	if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
- 		ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		ieee80211_aes_gmac_key_free(key->u.aes_gmac.tfm);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		ieee80211_aes_gcm_key_free(key->u.gcmp.tfm);
--		break;
--	}
- 	kzfree(key);
- }
- 
-@@ -826,7 +743,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->tkip.iv16 = key->u.tkip.tx.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- 		seq->ccmp.pn[5] = pn64;
- 		seq->ccmp.pn[4] = pn64 >> 8;
-@@ -836,7 +752,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->ccmp.pn[0] = pn64 >> 40;
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- 		seq->ccmp.pn[5] = pn64;
- 		seq->ccmp.pn[4] = pn64 >> 8;
-@@ -845,26 +760,6 @@ void ieee80211_get_key_tx_seq(struct iee
- 		seq->ccmp.pn[1] = pn64 >> 32;
- 		seq->ccmp.pn[0] = pn64 >> 40;
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
--		seq->ccmp.pn[5] = pn64;
--		seq->ccmp.pn[4] = pn64 >> 8;
--		seq->ccmp.pn[3] = pn64 >> 16;
--		seq->ccmp.pn[2] = pn64 >> 24;
--		seq->ccmp.pn[1] = pn64 >> 32;
--		seq->ccmp.pn[0] = pn64 >> 40;
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = atomic64_read(&key->u.gcmp.tx_pn);
--		seq->gcmp.pn[5] = pn64;
--		seq->gcmp.pn[4] = pn64 >> 8;
--		seq->gcmp.pn[3] = pn64 >> 16;
--		seq->gcmp.pn[2] = pn64 >> 24;
--		seq->gcmp.pn[1] = pn64 >> 32;
--		seq->gcmp.pn[0] = pn64 >> 40;
--		break;
- 	default:
- 		WARN_ON(1);
- 	}
-@@ -887,7 +782,6 @@ void ieee80211_get_key_rx_seq(struct iee
- 		seq->tkip.iv16 = key->u.tkip.rx[tid].iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- 			return;
- 		if (tid < 0)
-@@ -897,29 +791,11 @@ void ieee80211_get_key_rx_seq(struct iee
- 		memcpy(seq->ccmp.pn, pn, IEEE80211_CCMP_PN_LEN);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		if (WARN_ON(tid != 0))
- 			return;
- 		pn = key->u.aes_cmac.rx_pn;
- 		memcpy(seq->aes_cmac.pn, pn, IEEE80211_CMAC_PN_LEN);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		if (WARN_ON(tid != 0))
--			return;
--		pn = key->u.aes_gmac.rx_pn;
--		memcpy(seq->aes_gmac.pn, pn, IEEE80211_GMAC_PN_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
--			return;
--		if (tid < 0)
--			pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
--		else
--			pn = key->u.gcmp.rx_pn[tid];
--		memcpy(seq->gcmp.pn, pn, IEEE80211_GCMP_PN_LEN);
--		break;
- 	}
- }
- EXPORT_SYMBOL(ieee80211_get_key_rx_seq);
-@@ -938,7 +814,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		key->u.tkip.tx.iv16 = seq->tkip.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		pn64 = (u64)seq->ccmp.pn[5] |
- 		       ((u64)seq->ccmp.pn[4] << 8) |
- 		       ((u64)seq->ccmp.pn[3] << 16) |
-@@ -948,7 +823,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		atomic64_set(&key->u.ccmp.tx_pn, pn64);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		pn64 = (u64)seq->aes_cmac.pn[5] |
- 		       ((u64)seq->aes_cmac.pn[4] << 8) |
- 		       ((u64)seq->aes_cmac.pn[3] << 16) |
-@@ -957,26 +831,6 @@ void ieee80211_set_key_tx_seq(struct iee
- 		       ((u64)seq->aes_cmac.pn[0] << 40);
- 		atomic64_set(&key->u.aes_cmac.tx_pn, pn64);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		pn64 = (u64)seq->aes_gmac.pn[5] |
--		       ((u64)seq->aes_gmac.pn[4] << 8) |
--		       ((u64)seq->aes_gmac.pn[3] << 16) |
--		       ((u64)seq->aes_gmac.pn[2] << 24) |
--		       ((u64)seq->aes_gmac.pn[1] << 32) |
--		       ((u64)seq->aes_gmac.pn[0] << 40);
--		atomic64_set(&key->u.aes_gmac.tx_pn, pn64);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		pn64 = (u64)seq->gcmp.pn[5] |
--		       ((u64)seq->gcmp.pn[4] << 8) |
--		       ((u64)seq->gcmp.pn[3] << 16) |
--		       ((u64)seq->gcmp.pn[2] << 24) |
--		       ((u64)seq->gcmp.pn[1] << 32) |
--		       ((u64)seq->gcmp.pn[0] << 40);
--		atomic64_set(&key->u.gcmp.tx_pn, pn64);
--		break;
- 	default:
- 		WARN_ON(1);
- 		break;
-@@ -1000,7 +854,6 @@ void ieee80211_set_key_rx_seq(struct iee
- 		key->u.tkip.rx[tid].iv16 = seq->tkip.iv16;
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--	case WLAN_CIPHER_SUITE_CCMP_256:
- 		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- 			return;
- 		if (tid < 0)
-@@ -1010,29 +863,11 @@ void ieee80211_set_key_rx_seq(struct iee
- 		memcpy(pn, seq->ccmp.pn, IEEE80211_CCMP_PN_LEN);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- 		if (WARN_ON(tid != 0))
- 			return;
- 		pn = key->u.aes_cmac.rx_pn;
- 		memcpy(pn, seq->aes_cmac.pn, IEEE80211_CMAC_PN_LEN);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		if (WARN_ON(tid != 0))
--			return;
--		pn = key->u.aes_gmac.rx_pn;
--		memcpy(pn, seq->aes_gmac.pn, IEEE80211_GMAC_PN_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
--			return;
--		if (tid < 0)
--			pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
--		else
--			pn = key->u.gcmp.rx_pn[tid];
--		memcpy(pn, seq->gcmp.pn, IEEE80211_GCMP_PN_LEN);
--		break;
- 	default:
- 		WARN_ON(1);
- 		break;
---- a/net/mac80211/key.h
-+++ b/net/mac80211/key.h
-@@ -84,7 +84,7 @@ struct ieee80211_key {
- 			 * Management frames.
- 			 */
- 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
--			struct crypto_aead *tfm;
-+			struct crypto_cipher *tfm;
- 			u32 replays; /* dot11RSNAStatsCCMPReplays */
- 		} ccmp;
- 		struct {
-@@ -95,24 +95,6 @@ struct ieee80211_key {
- 			u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
- 		} aes_cmac;
- 		struct {
--			atomic64_t tx_pn;
--			u8 rx_pn[IEEE80211_GMAC_PN_LEN];
--			struct crypto_aead *tfm;
--			u32 replays; /* dot11RSNAStatsCMACReplays */
--			u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
--		} aes_gmac;
--		struct {
--			atomic64_t tx_pn;
--			/* Last received packet number. The first
--			 * IEEE80211_NUM_TIDS counters are used with Data
--			 * frames and the last counter is used with Robust
--			 * Management frames.
--			 */
--			u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_GCMP_PN_LEN];
--			struct crypto_aead *tfm;
--			u32 replays; /* dot11RSNAStatsGCMPReplays */
--		} gcmp;
--		struct {
- 			/* generic cipher scheme */
- 			u8 rx_pn[IEEE80211_NUM_TIDS + 1][MAX_PN_LEN];
- 		} gen;
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -666,15 +666,9 @@ static int ieee80211_init_cipher_suites(
- 		WLAN_CIPHER_SUITE_WEP104,
- 		WLAN_CIPHER_SUITE_TKIP,
- 		WLAN_CIPHER_SUITE_CCMP,
--		WLAN_CIPHER_SUITE_CCMP_256,
--		WLAN_CIPHER_SUITE_GCMP,
--		WLAN_CIPHER_SUITE_GCMP_256,
- 
- 		/* keep last -- depends on hw flags! */
--		WLAN_CIPHER_SUITE_AES_CMAC,
--		WLAN_CIPHER_SUITE_BIP_CMAC_256,
--		WLAN_CIPHER_SUITE_BIP_GMAC_128,
--		WLAN_CIPHER_SUITE_BIP_GMAC_256,
-+		WLAN_CIPHER_SUITE_AES_CMAC
- 	};
- 
- 	if (local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL ||
-@@ -713,7 +707,7 @@ static int ieee80211_init_cipher_suites(
- 		local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
- 
- 		if (!have_mfp)
--			local->hw.wiphy->n_cipher_suites -= 4;
-+			local->hw.wiphy->n_cipher_suites--;
- 
- 		if (!have_wep) {
- 			local->hw.wiphy->cipher_suites += 2;
-@@ -730,42 +724,32 @@ static int ieee80211_init_cipher_suites(
- 		/* Driver specifies cipher schemes only (but not cipher suites
- 		 * including the schemes)
- 		 *
--		 * We start counting ciphers defined by schemes, TKIP, CCMP,
--		 * CCMP-256, GCMP, and GCMP-256
-+		 * We start counting ciphers defined by schemes, TKIP and CCMP
- 		 */
--		n_suites = local->hw.n_cipher_schemes + 5;
-+		n_suites = local->hw.n_cipher_schemes + 2;
- 
- 		/* check if we have WEP40 and WEP104 */
- 		if (have_wep)
- 			n_suites += 2;
- 
--		/* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
--		 * BIP-GMAC-256
--		 */
-+		/* check if we have AES_CMAC */
- 		if (have_mfp)
--			n_suites += 4;
-+			n_suites++;
- 
- 		suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
- 		if (!suites)
- 			return -ENOMEM;
- 
- 		suites[w++] = WLAN_CIPHER_SUITE_CCMP;
--		suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
- 		suites[w++] = WLAN_CIPHER_SUITE_TKIP;
--		suites[w++] = WLAN_CIPHER_SUITE_GCMP;
--		suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
- 
- 		if (have_wep) {
- 			suites[w++] = WLAN_CIPHER_SUITE_WEP40;
- 			suites[w++] = WLAN_CIPHER_SUITE_WEP104;
- 		}
- 
--		if (have_mfp) {
-+		if (have_mfp)
- 			suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
--			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
--		}
- 
- 		for (r = 0; r < local->hw.n_cipher_schemes; r++)
- 			suites[w++] = cs[r].cipher;
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -647,7 +647,6 @@ static int ieee80211_get_mmie_keyidx(str
- {
- 	struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data;
- 	struct ieee80211_mmie *mmie;
--	struct ieee80211_mmie_16 *mmie16;
- 
- 	if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da))
- 		return -1;
-@@ -657,18 +656,11 @@ static int ieee80211_get_mmie_keyidx(str
- 
- 	mmie = (struct ieee80211_mmie *)
- 		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id == WLAN_EID_MMIE &&
--	    mmie->length == sizeof(*mmie) - 2)
--		return le16_to_cpu(mmie->key_id);
--
--	mmie16 = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie16));
--	if (skb->len >= 24 + sizeof(*mmie16) &&
--	    mmie16->element_id == WLAN_EID_MMIE &&
--	    mmie16->length == sizeof(*mmie16) - 2)
--		return le16_to_cpu(mmie16->key_id);
-+	if (mmie->element_id != WLAN_EID_MMIE ||
-+	    mmie->length != sizeof(*mmie) - 2)
-+		return -1;
- 
--	return -1;
-+	return le16_to_cpu(mmie->key_id);
- }
- 
- static int iwl80211_get_cs_keyid(const struct ieee80211_cipher_scheme *cs,
-@@ -1658,27 +1650,11 @@ ieee80211_rx_h_decrypt(struct ieee80211_
- 		result = ieee80211_crypto_tkip_decrypt(rx);
- 		break;
- 	case WLAN_CIPHER_SUITE_CCMP:
--		result = ieee80211_crypto_ccmp_decrypt(
--			rx, IEEE80211_CCMP_MIC_LEN);
--		break;
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		result = ieee80211_crypto_ccmp_decrypt(
--			rx, IEEE80211_CCMP_256_MIC_LEN);
-+		result = ieee80211_crypto_ccmp_decrypt(rx);
- 		break;
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
- 		result = ieee80211_crypto_aes_cmac_decrypt(rx);
- 		break;
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		result = ieee80211_crypto_aes_cmac_256_decrypt(rx);
--		break;
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		result = ieee80211_crypto_aes_gmac_decrypt(rx);
--		break;
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		result = ieee80211_crypto_gcmp_decrypt(rx);
--		break;
- 	default:
- 		result = ieee80211_crypto_hw_decrypt(rx);
- 	}
-@@ -1805,9 +1781,7 @@ ieee80211_rx_h_defragment(struct ieee802
- 		/* This is the first fragment of a new frame. */
- 		entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
- 						 rx->seqno_idx, &(rx->skb));
--		if (rx->key &&
--		    (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
--		     rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256) &&
-+		if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP &&
- 		    ieee80211_has_protected(fc)) {
- 			int queue = rx->security_idx;
- 			/* Store CCMP PN so that we can verify that the next
-@@ -1836,9 +1810,7 @@ ieee80211_rx_h_defragment(struct ieee802
- 		int i;
- 		u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
- 		int queue;
--		if (!rx->key ||
--		    (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
--		     rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256))
-+		if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP)
- 			return RX_DROP_UNUSABLE;
- 		memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
- 		for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -626,9 +626,6 @@ ieee80211_tx_h_select_key(struct ieee802
- 				tx->key = NULL;
- 			break;
- 		case WLAN_CIPHER_SUITE_CCMP:
--		case WLAN_CIPHER_SUITE_CCMP_256:
--		case WLAN_CIPHER_SUITE_GCMP:
--		case WLAN_CIPHER_SUITE_GCMP_256:
- 			if (!ieee80211_is_data_present(hdr->frame_control) &&
- 			    !ieee80211_use_mfp(hdr->frame_control, tx->sta,
- 					       tx->skb))
-@@ -639,9 +636,6 @@ ieee80211_tx_h_select_key(struct ieee802
- 					ieee80211_is_mgmt(hdr->frame_control);
- 			break;
- 		case WLAN_CIPHER_SUITE_AES_CMAC:
--		case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--		case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- 			if (!ieee80211_is_mgmt(hdr->frame_control))
- 				tx->key = NULL;
- 			break;
-@@ -1017,21 +1011,9 @@ ieee80211_tx_h_encrypt(struct ieee80211_
- 	case WLAN_CIPHER_SUITE_TKIP:
- 		return ieee80211_crypto_tkip_encrypt(tx);
- 	case WLAN_CIPHER_SUITE_CCMP:
--		return ieee80211_crypto_ccmp_encrypt(
--			tx, IEEE80211_CCMP_MIC_LEN);
--	case WLAN_CIPHER_SUITE_CCMP_256:
--		return ieee80211_crypto_ccmp_encrypt(
--			tx, IEEE80211_CCMP_256_MIC_LEN);
-+		return ieee80211_crypto_ccmp_encrypt(tx);
- 	case WLAN_CIPHER_SUITE_AES_CMAC:
- 		return ieee80211_crypto_aes_cmac_encrypt(tx);
--	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
--		return ieee80211_crypto_aes_cmac_256_encrypt(tx);
--	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
--	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
--		return ieee80211_crypto_aes_gmac_encrypt(tx);
--	case WLAN_CIPHER_SUITE_GCMP:
--	case WLAN_CIPHER_SUITE_GCMP_256:
--		return ieee80211_crypto_gcmp_encrypt(tx);
- 	default:
- 		return ieee80211_crypto_hw_encrypt(tx);
- 	}
---- a/net/mac80211/wpa.c
-+++ b/net/mac80211/wpa.c
-@@ -22,8 +22,6 @@
- #include "tkip.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
- #include "wpa.h"
- 
- ieee80211_tx_result
-@@ -304,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee
- }
- 
- 
--static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
-+static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *scratch,
-+				int encrypted)
- {
- 	__le16 mask_fc;
- 	int a4_included, mgmt;
- 	u8 qos_tid;
--	u16 len_a;
-+	u8 *b_0, *aad;
-+	u16 data_len, len_a;
- 	unsigned int hdrlen;
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- 
-+	memset(scratch, 0, 6 * AES_BLOCK_SIZE);
-+
-+	b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+	aad = scratch + 4 * AES_BLOCK_SIZE;
-+
- 	/*
- 	 * Mask FC: zero subtype b4 b5 b6 (if not mgmt)
- 	 * Retry, PwrMgt, MoreData; set Protected
-@@ -334,21 +339,20 @@ static void ccmp_special_blocks(struct s
- 	else
- 		qos_tid = 0;
- 
--	/* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
--	 * mode authentication are not allowed to collide, yet both are derived
--	 * from this vector b_0. We only set L := 1 here to indicate that the
--	 * data size can be represented in (L+1) bytes. The CCM layer will take
--	 * care of storing the data length in the top (L+1) bytes and setting
--	 * and clearing the other bits as is required to derive the two IVs.
--	 */
--	b_0[0] = 0x1;
-+	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN;
-+	if (encrypted)
-+		data_len -= IEEE80211_CCMP_MIC_LEN;
- 
-+	/* First block, b_0 */
-+	b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
- 	/* Nonce: Nonce Flags | A2 | PN
- 	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
- 	 */
- 	b_0[1] = qos_tid | (mgmt << 4);
- 	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
- 	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
-+	/* l(m) */
-+	put_unaligned_be16(data_len, &b_0[14]);
- 
- 	/* AAD (extra authenticate-only data) / masked 802.11 header
- 	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -395,8 +399,7 @@ static inline void ccmp_hdr2pn(u8 *pn, u
- }
- 
- 
--static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb,
--			    unsigned int mic_len)
-+static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
- {
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- 	struct ieee80211_key *key = tx->key;
-@@ -405,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8
- 	u8 *pos;
- 	u8 pn[6];
- 	u64 pn64;
--	u8 aad[2 * AES_BLOCK_SIZE];
--	u8 b_0[AES_BLOCK_SIZE];
-+	u8 scratch[6 * AES_BLOCK_SIZE];
- 
- 	if (info->control.hw_key &&
- 	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
-@@ -427,7 +429,7 @@ static int ccmp_encrypt_skb(struct ieee8
- 	if (info->control.hw_key)
- 		tail = 0;
- 	else
--		tail = mic_len;
-+		tail = IEEE80211_CCMP_MIC_LEN;
- 
- 	if (WARN_ON(skb_tailroom(skb) < tail ||
- 		    skb_headroom(skb) < IEEE80211_CCMP_HDR_LEN))
-@@ -460,24 +462,23 @@ static int ccmp_encrypt_skb(struct ieee8
- 		return 0;
- 
- 	pos += IEEE80211_CCMP_HDR_LEN;
--	ccmp_special_blocks(skb, pn, b_0, aad);
--	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
--				  skb_put(skb, mic_len), mic_len);
-+	ccmp_special_blocks(skb, pn, scratch, 0);
-+	ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, scratch, pos, len,
-+				  pos, skb_put(skb, IEEE80211_CCMP_MIC_LEN));
- 
- 	return 0;
- }
- 
- 
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
--			      unsigned int mic_len)
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx)
- {
- 	struct sk_buff *skb;
- 
- 	ieee80211_tx_set_protected(tx);
- 
- 	skb_queue_walk(&tx->skbs, skb) {
--		if (ccmp_encrypt_skb(tx, skb, mic_len) < 0)
-+		if (ccmp_encrypt_skb(tx, skb) < 0)
- 			return TX_DROP;
- 	}
- 
-@@ -486,8 +487,7 @@ ieee80211_crypto_ccmp_encrypt(struct iee
- 
- 
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
--			      unsigned int mic_len)
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx)
- {
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
- 	int hdrlen;
-@@ -504,7 +504,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	    !ieee80211_is_robust_mgmt_frame(skb))
- 		return RX_CONTINUE;
- 
--	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
-+	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN -
-+		   IEEE80211_CCMP_MIC_LEN;
- 	if (!rx->sta || data_len < 0)
- 		return RX_DROP_UNUSABLE;
- 
-@@ -526,23 +527,23 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	}
- 
- 	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		u8 aad[2 * AES_BLOCK_SIZE];
--		u8 b_0[AES_BLOCK_SIZE];
-+		u8 scratch[6 * AES_BLOCK_SIZE];
- 		/* hardware didn't decrypt/verify MIC */
--		ccmp_special_blocks(skb, pn, b_0, aad);
-+		ccmp_special_blocks(skb, pn, scratch, 1);
- 
- 		if (ieee80211_aes_ccm_decrypt(
--			    key->u.ccmp.tfm, b_0, aad,
-+			    key->u.ccmp.tfm, scratch,
- 			    skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN,
- 			    data_len,
--			    skb->data + skb->len - mic_len, mic_len))
-+			    skb->data + skb->len - IEEE80211_CCMP_MIC_LEN,
-+			    skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN))
- 			return RX_DROP_UNUSABLE;
- 	}
- 
- 	memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN);
- 
- 	/* Remove CCMP header and MIC */
--	if (pskb_trim(skb, skb->len - mic_len))
-+	if (pskb_trim(skb, skb->len - IEEE80211_CCMP_MIC_LEN))
- 		return RX_DROP_UNUSABLE;
- 	memmove(skb->data + IEEE80211_CCMP_HDR_LEN, skb->data, hdrlen);
- 	skb_pull(skb, IEEE80211_CCMP_HDR_LEN);
-@@ -550,229 +551,6 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- 	return RX_CONTINUE;
- }
- 
--static void gcmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *j_0, u8 *aad)
--{
--	__le16 mask_fc;
--	u8 qos_tid;
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	memcpy(j_0, hdr->addr2, ETH_ALEN);
--	memcpy(&j_0[ETH_ALEN], pn, IEEE80211_GCMP_PN_LEN);
--	j_0[13] = 0;
--	j_0[14] = 0;
--	j_0[AES_BLOCK_SIZE - 1] = 0x01;
--
--	/* AAD (extra authenticate-only data) / masked 802.11 header
--	 * FC | A1 | A2 | A3 | SC | [A4] | [QC]
--	 */
--	put_unaligned_be16(ieee80211_hdrlen(hdr->frame_control) - 2, &aad[0]);
--	/* Mask FC: zero subtype b4 b5 b6 (if not mgmt)
--	 * Retry, PwrMgt, MoreData; set Protected
--	 */
--	mask_fc = hdr->frame_control;
--	mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY |
--				IEEE80211_FCTL_PM | IEEE80211_FCTL_MOREDATA);
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		mask_fc &= ~cpu_to_le16(0x0070);
--	mask_fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
--
--	put_unaligned(mask_fc, (__le16 *)&aad[2]);
--	memcpy(&aad[4], &hdr->addr1, 3 * ETH_ALEN);
--
--	/* Mask Seq#, leave Frag# */
--	aad[22] = *((u8 *)&hdr->seq_ctrl) & 0x0f;
--	aad[23] = 0;
--
--	if (ieee80211_is_data_qos(hdr->frame_control))
--		qos_tid = *ieee80211_get_qos_ctl(hdr) &
--			IEEE80211_QOS_CTL_TID_MASK;
--	else
--		qos_tid = 0;
--
--	if (ieee80211_has_a4(hdr->frame_control)) {
--		memcpy(&aad[24], hdr->addr4, ETH_ALEN);
--		aad[30] = qos_tid;
--		aad[31] = 0;
--	} else {
--		memset(&aad[24], 0, ETH_ALEN + IEEE80211_QOS_CTL_LEN);
--		aad[24] = qos_tid;
--	}
--}
--
--static inline void gcmp_pn2hdr(u8 *hdr, const u8 *pn, int key_id)
--{
--	hdr[0] = pn[5];
--	hdr[1] = pn[4];
--	hdr[2] = 0;
--	hdr[3] = 0x20 | (key_id << 6);
--	hdr[4] = pn[3];
--	hdr[5] = pn[2];
--	hdr[6] = pn[1];
--	hdr[7] = pn[0];
--}
--
--static inline void gcmp_hdr2pn(u8 *pn, const u8 *hdr)
--{
--	pn[0] = hdr[7];
--	pn[1] = hdr[6];
--	pn[2] = hdr[5];
--	pn[3] = hdr[4];
--	pn[4] = hdr[1];
--	pn[5] = hdr[0];
--}
--
--static int gcmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
--{
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
--	int hdrlen, len, tail;
--	u8 *pos;
--	u8 pn[6];
--	u64 pn64;
--	u8 aad[2 * AES_BLOCK_SIZE];
--	u8 j_0[AES_BLOCK_SIZE];
--
--	if (info->control.hw_key &&
--	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
--	    !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
--	    !((info->control.hw_key->flags &
--	       IEEE80211_KEY_FLAG_GENERATE_IV_MGMT) &&
--	      ieee80211_is_mgmt(hdr->frame_control))) {
--		/* hwaccel has no need for preallocated room for GCMP
--		 * header or MIC fields
--		 */
--		return 0;
--	}
--
--	hdrlen = ieee80211_hdrlen(hdr->frame_control);
--	len = skb->len - hdrlen;
--
--	if (info->control.hw_key)
--		tail = 0;
--	else
--		tail = IEEE80211_GCMP_MIC_LEN;
--
--	if (WARN_ON(skb_tailroom(skb) < tail ||
--		    skb_headroom(skb) < IEEE80211_GCMP_HDR_LEN))
--		return -1;
--
--	pos = skb_push(skb, IEEE80211_GCMP_HDR_LEN);
--	memmove(pos, pos + IEEE80211_GCMP_HDR_LEN, hdrlen);
--	skb_set_network_header(skb, skb_network_offset(skb) +
--				    IEEE80211_GCMP_HDR_LEN);
--
--	/* the HW only needs room for the IV, but not the actual IV */
--	if (info->control.hw_key &&
--	    (info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE))
--		return 0;
--
--	hdr = (struct ieee80211_hdr *)pos;
--	pos += hdrlen;
--
--	pn64 = atomic64_inc_return(&key->u.gcmp.tx_pn);
--
--	pn[5] = pn64;
--	pn[4] = pn64 >> 8;
--	pn[3] = pn64 >> 16;
--	pn[2] = pn64 >> 24;
--	pn[1] = pn64 >> 32;
--	pn[0] = pn64 >> 40;
--
--	gcmp_pn2hdr(pos, pn, key->conf.keyidx);
--
--	/* hwaccel - with software GCMP header */
--	if (info->control.hw_key)
--		return 0;
--
--	pos += IEEE80211_GCMP_HDR_LEN;
--	gcmp_special_blocks(skb, pn, j_0, aad);
--	ieee80211_aes_gcm_encrypt(key->u.gcmp.tfm, j_0, aad, pos, len,
--				  skb_put(skb, IEEE80211_GCMP_MIC_LEN));
--
--	return 0;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--
--	ieee80211_tx_set_protected(tx);
--
--	skb_queue_walk(&tx->skbs, skb) {
--		if (gcmp_encrypt_skb(tx, skb) < 0)
--			return TX_DROP;
--	}
--
--	return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
--	int hdrlen;
--	struct ieee80211_key *key = rx->key;
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	u8 pn[IEEE80211_GCMP_PN_LEN];
--	int data_len;
--	int queue;
--
--	hdrlen = ieee80211_hdrlen(hdr->frame_control);
--
--	if (!ieee80211_is_data(hdr->frame_control) &&
--	    !ieee80211_is_robust_mgmt_frame(skb))
--		return RX_CONTINUE;
--
--	data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN -
--		   IEEE80211_GCMP_MIC_LEN;
--	if (!rx->sta || data_len < 0)
--		return RX_DROP_UNUSABLE;
--
--	if (status->flag & RX_FLAG_DECRYPTED) {
--		if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_GCMP_HDR_LEN))
--			return RX_DROP_UNUSABLE;
--	} else {
--		if (skb_linearize(rx->skb))
--			return RX_DROP_UNUSABLE;
--	}
--
--	gcmp_hdr2pn(pn, skb->data + hdrlen);
--
--	queue = rx->security_idx;
--
--	if (memcmp(pn, key->u.gcmp.rx_pn[queue], IEEE80211_GCMP_PN_LEN) <= 0) {
--		key->u.gcmp.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		u8 aad[2 * AES_BLOCK_SIZE];
--		u8 j_0[AES_BLOCK_SIZE];
--		/* hardware didn't decrypt/verify MIC */
--		gcmp_special_blocks(skb, pn, j_0, aad);
--
--		if (ieee80211_aes_gcm_decrypt(
--			    key->u.gcmp.tfm, j_0, aad,
--			    skb->data + hdrlen + IEEE80211_GCMP_HDR_LEN,
--			    data_len,
--			    skb->data + skb->len - IEEE80211_GCMP_MIC_LEN))
--			return RX_DROP_UNUSABLE;
--	}
--
--	memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN);
--
--	/* Remove GCMP header and MIC */
--	if (pskb_trim(skb, skb->len - IEEE80211_GCMP_MIC_LEN))
--		return RX_DROP_UNUSABLE;
--	memmove(skb->data + IEEE80211_GCMP_HDR_LEN, skb->data, hdrlen);
--	skb_pull(skb, IEEE80211_GCMP_HDR_LEN);
--
--	return RX_CONTINUE;
--}
--
- static ieee80211_tx_result
- ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx,
- 			    struct sk_buff *skb)
-@@ -956,48 +734,6 @@ ieee80211_crypto_aes_cmac_encrypt(struct
- 	return TX_CONTINUE;
- }
- 
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--	struct ieee80211_tx_info *info;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20];
--	u64 pn64;
--
--	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
--		return TX_DROP;
--
--	skb = skb_peek(&tx->skbs);
--
--	info = IEEE80211_SKB_CB(skb);
--
--	if (info->control.hw_key)
--		return TX_CONTINUE;
--
--	if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
--		return TX_DROP;
--
--	mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
--	mmie->element_id = WLAN_EID_MMIE;
--	mmie->length = sizeof(*mmie) - 2;
--	mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
--	/* PN = PN + 1 */
--	pn64 = atomic64_inc_return(&key->u.aes_cmac.tx_pn);
--
--	bip_ipn_set64(mmie->sequence_number, pn64);
--
--	bip_aad(skb, aad);
--
--	/* MIC = AES-256-CMAC(IGTK, AAD || Management Frame Body || MMIE, 128)
--	 */
--	ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
--			       skb->data + 24, skb->len - 24, mmie->mic);
--
--	return TX_CONTINUE;
--}
- 
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx)
-@@ -1045,160 +781,6 @@ ieee80211_crypto_aes_cmac_decrypt(struct
- 
- 	/* Remove MMIE */
- 	skb_trim(skb, skb->len - sizeof(*mmie));
--
--	return RX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	struct ieee80211_key *key = rx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20], mic[16], ipn[6];
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		return RX_CONTINUE;
--
--	/* management frames are already linear */
--
--	if (skb->len < 24 + sizeof(*mmie))
--		return RX_DROP_UNUSABLE;
--
--	mmie = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id != WLAN_EID_MMIE ||
--	    mmie->length != sizeof(*mmie) - 2)
--		return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
--	bip_ipn_swap(ipn, mmie->sequence_number);
--
--	if (memcmp(ipn, key->u.aes_cmac.rx_pn, 6) <= 0) {
--		key->u.aes_cmac.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		/* hardware didn't decrypt/verify MIC */
--		bip_aad(skb, aad);
--		ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
--				       skb->data + 24, skb->len - 24, mic);
--		if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
--			key->u.aes_cmac.icverrors++;
--			return RX_DROP_UNUSABLE;
--		}
--	}
--
--	memcpy(key->u.aes_cmac.rx_pn, ipn, 6);
--
--	/* Remove MMIE */
--	skb_trim(skb, skb->len - sizeof(*mmie));
--
--	return RX_CONTINUE;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx)
--{
--	struct sk_buff *skb;
--	struct ieee80211_tx_info *info;
--	struct ieee80211_key *key = tx->key;
--	struct ieee80211_mmie_16 *mmie;
--	struct ieee80211_hdr *hdr;
--	u8 aad[20];
--	u64 pn64;
--	u8 nonce[12];
--
--	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
--		return TX_DROP;
--
--	skb = skb_peek(&tx->skbs);
--
--	info = IEEE80211_SKB_CB(skb);
--
--	if (info->control.hw_key)
--		return TX_CONTINUE;
--
--	if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
--		return TX_DROP;
--
--	mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
--	mmie->element_id = WLAN_EID_MMIE;
--	mmie->length = sizeof(*mmie) - 2;
--	mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
--	/* PN = PN + 1 */
--	pn64 = atomic64_inc_return(&key->u.aes_gmac.tx_pn);
--
--	bip_ipn_set64(mmie->sequence_number, pn64);
--
--	bip_aad(skb, aad);
--
--	hdr = (struct ieee80211_hdr *)skb->data;
--	memcpy(nonce, hdr->addr2, ETH_ALEN);
--	bip_ipn_swap(nonce + ETH_ALEN, mmie->sequence_number);
--
--	/* MIC = AES-GMAC(IGTK, AAD || Management Frame Body || MMIE, 128) */
--	if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
--			       skb->data + 24, skb->len - 24, mmie->mic) < 0)
--		return TX_DROP;
--
--	return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx)
--{
--	struct sk_buff *skb = rx->skb;
--	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
--	struct ieee80211_key *key = rx->key;
--	struct ieee80211_mmie_16 *mmie;
--	u8 aad[20], mic[16], ipn[6], nonce[12];
--	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
--	if (!ieee80211_is_mgmt(hdr->frame_control))
--		return RX_CONTINUE;
--
--	/* management frames are already linear */
--
--	if (skb->len < 24 + sizeof(*mmie))
--		return RX_DROP_UNUSABLE;
--
--	mmie = (struct ieee80211_mmie_16 *)
--		(skb->data + skb->len - sizeof(*mmie));
--	if (mmie->element_id != WLAN_EID_MMIE ||
--	    mmie->length != sizeof(*mmie) - 2)
--		return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
--	bip_ipn_swap(ipn, mmie->sequence_number);
--
--	if (memcmp(ipn, key->u.aes_gmac.rx_pn, 6) <= 0) {
--		key->u.aes_gmac.replays++;
--		return RX_DROP_UNUSABLE;
--	}
--
--	if (!(status->flag & RX_FLAG_DECRYPTED)) {
--		/* hardware didn't decrypt/verify MIC */
--		bip_aad(skb, aad);
--
--		memcpy(nonce, hdr->addr2, ETH_ALEN);
--		memcpy(nonce + ETH_ALEN, ipn, 6);
--
--		if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
--				       skb->data + 24, skb->len - 24,
--				       mic) < 0 ||
--		    memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
--			key->u.aes_gmac.icverrors++;
--			return RX_DROP_UNUSABLE;
--		}
--	}
--
--	memcpy(key->u.aes_gmac.rx_pn, ipn, 6);
--
--	/* Remove MMIE */
--	skb_trim(skb, skb->len - sizeof(*mmie));
- 
- 	return RX_CONTINUE;
- }
---- a/net/mac80211/wpa.h
-+++ b/net/mac80211/wpa.h
-@@ -24,32 +24,17 @@ ieee80211_rx_result
- ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx);
- 
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
--			      unsigned int mic_len);
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
--			      unsigned int mic_len);
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx);
- 
- ieee80211_tx_result
- ieee80211_crypto_aes_cmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx);
- ieee80211_tx_result
- ieee80211_crypto_hw_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_hw_decrypt(struct ieee80211_rx_data *rx);
- 
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx);
--
- #endif /* WPA_H */
diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
index 41a3c4f..cff6d89 100644
--- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
+++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -856,7 +856,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -886,7 +886,6 @@ static int ieee80211_stop_ap(struct wiph
  	sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
  
  	__sta_info_flush(sdata, true);
diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
index de79bd2..5fc9454 100644
--- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
+++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
@@ -18,7 +18,7 @@
  static int ieee80211_ifa6_changed(struct notifier_block *nb,
  				  unsigned long data, void *arg)
  {
-@@ -1057,14 +1057,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1086,14 +1086,14 @@ int ieee80211_register_hw(struct ieee802
  	if (result)
  		goto fail_pm_qos;
  
@@ -35,7 +35,7 @@
  	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
  	result = register_inet6addr_notifier(&local->ifa6_notifier);
  	if (result)
-@@ -1073,13 +1073,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1102,13 +1102,13 @@ int ieee80211_register_hw(struct ieee802
  
  	return 0;
  
@@ -52,7 +52,7 @@
   fail_ifa:
  	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
  			       &local->network_latency_notifier);
-@@ -1124,10 +1124,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1141,10 +1141,10 @@ void ieee80211_unregister_hw(struct ieee
  
  	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
  			       &local->network_latency_notifier);
diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch
index 47dcec3..29f05c4 100644
--- a/package/kernel/mac80211/patches/210-ap_scan.patch
+++ b/package/kernel/mac80211/patches/210-ap_scan.patch
@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1963,7 +1963,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2008,7 +2008,7 @@ static int ieee80211_scan(struct wiphy *
  		 * the  frames sent while scanning on other channel will be
  		 * lost)
  		 */
diff --git a/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch
new file mode 100644
index 0000000..bddb15a
--- /dev/null
+++ b/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch
@@ -0,0 +1,31 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 7 Jun 2015 13:53:35 +0200
+Subject: [PATCH] ath9k: force rx_clear when disabling rx
+
+This makes stopping Rx more reliable and should reduce the frequency of
+Rx related DMA stop warnings
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/mac.c
++++ b/drivers/net/wireless/ath/ath9k/mac.c
+@@ -677,13 +677,15 @@ void ath9k_hw_startpcureceive(struct ath
+ 
+ 	ath9k_ani_reset(ah, is_scanning);
+ 
+-	REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
++	REG_CLR_BIT(ah, AR_DIAG_SW,
++		    AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+ }
+ EXPORT_SYMBOL(ath9k_hw_startpcureceive);
+ 
+ void ath9k_hw_abortpcurecv(struct ath_hw *ah)
+ {
+-	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
++	REG_SET_BIT(ah, AR_DIAG_SW,
++		    AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+ 
+ 	ath9k_hw_disable_mib_counters(ah);
+ }
diff --git a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch b/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch
deleted file mode 100644
index 237121b..0000000
--- a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch
+++ /dev/null
@@ -1,882 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 18 Nov 2014 23:58:51 +0100
-Subject: [PATCH] mac80211: add an intermediate software queue implementation
-
-This allows drivers to request per-vif and per-sta-tid queues from which
-they can pull frames. This makes it easier to keep the hardware queues
-short, and to improve fairness between clients and vifs.
-
-The task of scheduling packet transmission is left up to the driver -
-queueing is controlled by mac80211. Drivers can only dequeue packets by
-calling ieee80211_tx_dequeue. This makes it possible to add active queue
-management later without changing drivers using this code.
-
-This can also be used as a starting point to implement A-MSDU
-aggregation in a way that does not add artificially induced latency.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -84,6 +84,39 @@
-  *
-  */
- 
-+/**
-+ * DOC: mac80211 software tx queueing
-+ *
-+ * mac80211 provides an optional intermediate queueing implementation designed
-+ * to allow the driver to keep hardware queues short and provide some fairness
-+ * between different stations/interfaces.
-+ * In this model, the driver pulls data frames from the mac80211 queue instead
-+ * of letting mac80211 push them via drv_tx().
-+ * Other frames (e.g. control or management) are still pushed using drv_tx().
-+ *
-+ * Drivers indicate that they use this model by implementing the .wake_tx_queue
-+ * driver operation.
-+ *
-+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
-+ * single per-vif queue for multicast data frames.
-+ *
-+ * The driver is expected to initialize its private per-queue data for stations
-+ * and interfaces in the .add_interface and .sta_add ops.
-+ *
-+ * The driver can't access the queue directly. To dequeue a frame, it calls
-+ * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
-+ * calls the .wake_tx_queue driver op.
-+ *
-+ * For AP powersave TIM handling, the driver only needs to indicate if it has
-+ * buffered packets in the driver specific data structures by calling
-+ * ieee80211_sta_set_buffered(). For frames buffered in the ieee80211_txq
-+ * struct, mac80211 sets the appropriate TIM PVB bits and calls
-+ * .release_buffered_frames().
-+ * In that callback the driver is therefore expected to release its own
-+ * buffered frames and afterwards also frames from the ieee80211_txq (obtained
-+ * via the usual ieee80211_tx_dequeue).
-+ */
-+
- struct device;
- 
- /**
-@@ -1246,6 +1279,7 @@ enum ieee80211_vif_flags {
-  *	monitor interface (if that is requested.)
-  * @drv_priv: data area for driver use, will always be aligned to
-  *	sizeof(void *).
-+ * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
-  */
- struct ieee80211_vif {
- 	enum nl80211_iftype type;
-@@ -1257,6 +1291,8 @@ struct ieee80211_vif {
- 	u8 cab_queue;
- 	u8 hw_queue[IEEE80211_NUM_ACS];
- 
-+	struct ieee80211_txq *txq;
-+
- 	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
- 
- 	u32 driver_flags;
-@@ -1501,6 +1537,7 @@ struct ieee80211_sta_rates {
-  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
-  *	valid if the STA is a TDLS peer in the first place.
-  * @mfp: indicates whether the STA uses management frame protection or not.
-+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
-  */
- struct ieee80211_sta {
- 	u32 supp_rates[IEEE80211_NUM_BANDS];
-@@ -1519,6 +1556,8 @@ struct ieee80211_sta {
- 	bool tdls_initiator;
- 	bool mfp;
- 
-+	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
-+
- 	/* must be last */
- 	u8 drv_priv[0] __aligned(sizeof(void *));
- };
-@@ -1547,6 +1586,27 @@ struct ieee80211_tx_control {
- };
- 
- /**
-+ * struct ieee80211_txq - Software intermediate tx queue
-+ *
-+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
-+ * @sta: station table entry, %NULL for per-vif queue
-+ * @tid: the TID for this queue (unused for per-vif queue)
-+ * @ac: the AC for this queue
-+ *
-+ * The driver can obtain packets from this queue by calling
-+ * ieee80211_tx_dequeue().
-+ */
-+struct ieee80211_txq {
-+	struct ieee80211_vif *vif;
-+	struct ieee80211_sta *sta;
-+	u8 tid;
-+	u8 ac;
-+
-+	/* must be last */
-+	u8 drv_priv[0] __aligned(sizeof(void *));
-+};
-+
-+/**
-  * enum ieee80211_hw_flags - hardware flags
-  *
-  * These flags are used to indicate hardware capabilities to
-@@ -1770,6 +1830,8 @@ enum ieee80211_hw_flags {
-  *	within &struct ieee80211_sta.
-  * @chanctx_data_size: size (in bytes) of the drv_priv data area
-  *	within &struct ieee80211_chanctx_conf.
-+ * @txq_data_size: size (in bytes) of the drv_priv data area
-+ *	within @struct ieee80211_txq.
-  *
-  * @max_rates: maximum number of alternate rate retry stages the hw
-  *	can handle.
-@@ -1818,6 +1880,9 @@ enum ieee80211_hw_flags {
-  * @n_cipher_schemes: a size of an array of cipher schemes definitions.
-  * @cipher_schemes: a pointer to an array of cipher scheme definitions
-  *	supported by HW.
-+ *
-+ * @txq_ac_max_pending: maximum number of frames per AC pending in all txq
-+ *	entries for a vif.
-  */
- struct ieee80211_hw {
- 	struct ieee80211_conf conf;
-@@ -1830,6 +1895,7 @@ struct ieee80211_hw {
- 	int vif_data_size;
- 	int sta_data_size;
- 	int chanctx_data_size;
-+	int txq_data_size;
- 	u16 queues;
- 	u16 max_listen_interval;
- 	s8 max_signal;
-@@ -1846,6 +1912,7 @@ struct ieee80211_hw {
- 	u8 uapsd_max_sp_len;
- 	u8 n_cipher_schemes;
- 	const struct ieee80211_cipher_scheme *cipher_schemes;
-+	int txq_ac_max_pending;
- };
- 
- /**
-@@ -3007,6 +3074,8 @@ enum ieee80211_reconfig_type {
-  *	response template is provided, together with the location of the
-  *	switch-timing IE within the template. The skb can only be used within
-  *	the function call.
-+ *
-+ * @wake_tx_queue: Called when new packets have been added to the queue.
-  */
- struct ieee80211_ops {
- 	void (*tx)(struct ieee80211_hw *hw,
-@@ -3238,6 +3307,9 @@ struct ieee80211_ops {
- 	void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw,
- 					 struct ieee80211_vif *vif,
- 					 struct ieee80211_tdls_ch_sw_params *params);
-+
-+	void (*wake_tx_queue)(struct ieee80211_hw *hw,
-+			      struct ieee80211_txq *txq);
- };
- 
- /**
-@@ -5249,4 +5321,15 @@ void ieee80211_unreserve_tid(struct ieee
-  */
- size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
- 			  const u8 *ids, int n_ids, size_t offset);
-+
-+/**
-+ * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ *
-+ * Returns the skb if successful, %NULL if no frame was available.
-+ */
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+				     struct ieee80211_txq *txq);
- #endif /* MAC80211_H */
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1367,4 +1367,16 @@ drv_tdls_recv_channel_switch(struct ieee
- 	trace_drv_return_void(local);
- }
- 
-+static inline void drv_wake_tx_queue(struct ieee80211_local *local,
-+				     struct txq_info *txq)
-+{
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
-+
-+	if (!check_sdata_in_driver(sdata))
-+		return;
-+
-+	trace_drv_wake_tx_queue(local, sdata, txq);
-+	local->ops->wake_tx_queue(&local->hw, &txq->txq);
-+}
-+
- #endif /* __MAC80211_DRIVER_OPS */
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -809,6 +809,19 @@ struct mac80211_qos_map {
- 	struct rcu_head rcu_head;
- };
- 
-+enum txq_info_flags {
-+	IEEE80211_TXQ_STOP,
-+	IEEE80211_TXQ_AMPDU,
-+};
-+
-+struct txq_info {
-+	struct sk_buff_head queue;
-+	unsigned long flags;
-+
-+	/* keep last! */
-+	struct ieee80211_txq txq;
-+};
-+
- struct ieee80211_sub_if_data {
- 	struct list_head list;
- 
-@@ -853,6 +866,7 @@ struct ieee80211_sub_if_data {
- 	bool control_port_no_encrypt;
- 	int encrypt_headroom;
- 
-+	atomic_t txqs_len[IEEE80211_NUM_ACS];
- 	struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
- 	struct mac80211_qos_map __rcu *qos_map;
- 
-@@ -1453,6 +1467,10 @@ static inline struct ieee80211_local *hw
- 	return container_of(hw, struct ieee80211_local, hw);
- }
- 
-+static inline struct txq_info *to_txq_info(struct ieee80211_txq *txq)
-+{
-+	return container_of(txq, struct txq_info, txq);
-+}
- 
- static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
- {
-@@ -1905,6 +1923,9 @@ static inline bool ieee80211_can_run_wor
- 	return true;
- }
- 
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+			     struct sta_info *sta,
-+			     struct txq_info *txq, int tid);
- void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
- 			 u16 transaction, u16 auth_alg, u16 status,
- 			 const u8 *extra, size_t extra_len, const u8 *bssid,
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -969,6 +969,13 @@ static void ieee80211_do_stop(struct iee
- 	}
- 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- 
-+	if (sdata->vif.txq) {
-+		struct txq_info *txqi = to_txq_info(sdata->vif.txq);
-+
-+		ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+		atomic_set(&sdata->txqs_len[txqi->txq.ac], 0);
-+	}
-+
- 	if (local->open_count == 0)
- 		ieee80211_clear_tx_pending(local);
- 
-@@ -1674,6 +1681,7 @@ int ieee80211_if_add(struct ieee80211_lo
- {
- 	struct net_device *ndev = NULL;
- 	struct ieee80211_sub_if_data *sdata = NULL;
-+	struct txq_info *txqi;
- 	int ret, i;
- 	int txqs = 1;
- 
-@@ -1693,10 +1701,18 @@ int ieee80211_if_add(struct ieee80211_lo
- 		ieee80211_assign_perm_addr(local, wdev->address, type);
- 		memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
- 	} else {
-+		int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size,
-+				 sizeof(void *));
-+		int txq_size = 0;
-+
-+		if (local->ops->wake_tx_queue)
-+			txq_size += sizeof(struct txq_info) +
-+				    local->hw.txq_data_size;
-+
- 		if (local->hw.queues >= IEEE80211_NUM_ACS)
- 			txqs = IEEE80211_NUM_ACS;
- 
--		ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
-+		ndev = alloc_netdev_mqs(size + txq_size,
- 					name, NET_NAME_UNKNOWN,
- 					ieee80211_if_setup, txqs, 1);
- 		if (!ndev)
-@@ -1731,6 +1747,11 @@ int ieee80211_if_add(struct ieee80211_lo
- 		memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
- 		memcpy(sdata->name, ndev->name, IFNAMSIZ);
- 
-+		if (txq_size) {
-+			txqi = netdev_priv(ndev) + size;
-+			ieee80211_init_tx_queue(sdata, NULL, txqi, 0);
-+		}
-+
- 		sdata->dev = ndev;
- 	}
- 
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -1019,6 +1019,9 @@ int ieee80211_register_hw(struct ieee802
- 
- 	local->dynamic_ps_forced_timeout = -1;
- 
-+	if (!local->hw.txq_ac_max_pending)
-+		local->hw.txq_ac_max_pending = 64;
-+
- 	result = ieee80211_wep_init(local);
- 	if (result < 0)
- 		wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -118,6 +118,16 @@ static void __cleanup_single_sta(struct
- 		atomic_dec(&ps->num_sta_ps);
- 	}
- 
-+	if (sta->sta.txq[0]) {
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+			int n = skb_queue_len(&txqi->queue);
-+
-+			ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+			atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]);
-+		}
-+	}
-+
- 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
- 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
- 		ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
-@@ -234,6 +244,8 @@ void sta_info_free(struct ieee80211_loca
- 
- 	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
- 
-+	if (sta->sta.txq[0])
-+		kfree(to_txq_info(sta->sta.txq[0]));
- 	kfree(rcu_dereference_raw(sta->sta.rates));
- 	kfree(sta);
- }
-@@ -285,11 +297,12 @@ struct sta_info *sta_info_alloc(struct i
- 				const u8 *addr, gfp_t gfp)
- {
- 	struct ieee80211_local *local = sdata->local;
-+	struct ieee80211_hw *hw = &local->hw;
- 	struct sta_info *sta;
- 	struct timespec uptime;
- 	int i;
- 
--	sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
-+	sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp);
- 	if (!sta)
- 		return NULL;
- 
-@@ -321,11 +334,25 @@ struct sta_info *sta_info_alloc(struct i
- 	for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++)
- 		ewma_init(&sta->chain_signal_avg[i], 1024, 8);
- 
--	if (sta_prepare_rate_control(local, sta, gfp)) {
--		kfree(sta);
--		return NULL;
-+	if (local->ops->wake_tx_queue) {
-+		void *txq_data;
-+		int size = sizeof(struct txq_info) +
-+			   ALIGN(hw->txq_data_size, sizeof(void *));
-+
-+		txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp);
-+		if (!txq_data)
-+			goto free;
-+
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txq = txq_data + i * size;
-+
-+			ieee80211_init_tx_queue(sdata, sta, txq, i);
-+		}
- 	}
- 
-+	if (sta_prepare_rate_control(local, sta, gfp))
-+		goto free_txq;
-+
- 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
- 		/*
- 		 * timer_to_tid must be initialized with identity mapping
-@@ -346,7 +373,7 @@ struct sta_info *sta_info_alloc(struct i
- 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
- 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
- 		struct ieee80211_supported_band *sband =
--			local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
-+			hw->wiphy->bands[ieee80211_get_sdata_band(sdata)];
- 		u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
- 				IEEE80211_HT_CAP_SM_PS_SHIFT;
- 		/*
-@@ -371,6 +398,13 @@ struct sta_info *sta_info_alloc(struct i
- 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
- 
- 	return sta;
-+
-+free_txq:
-+	if (sta->sta.txq[0])
-+		kfree(to_txq_info(sta->sta.txq[0]));
-+free:
-+	kfree(sta);
-+	return NULL;
- }
- 
- static int sta_info_insert_check(struct sta_info *sta)
-@@ -640,6 +674,8 @@ static void __sta_info_recalc_tim(struct
- 
- 		indicate_tim |=
- 			sta->driver_buffered_tids & tids;
-+		indicate_tim |=
-+			sta->txq_buffered_tids & tids;
- 	}
- 
-  done:
-@@ -1071,7 +1107,7 @@ void ieee80211_sta_ps_deliver_wakeup(str
- 	struct ieee80211_sub_if_data *sdata = sta->sdata;
- 	struct ieee80211_local *local = sdata->local;
- 	struct sk_buff_head pending;
--	int filtered = 0, buffered = 0, ac;
-+	int filtered = 0, buffered = 0, ac, i;
- 	unsigned long flags;
- 	struct ps_data *ps;
- 
-@@ -1090,10 +1126,22 @@ void ieee80211_sta_ps_deliver_wakeup(str
- 
- 	BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
- 	sta->driver_buffered_tids = 0;
-+	sta->txq_buffered_tids = 0;
- 
- 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
- 		drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta);
- 
-+	if (sta->sta.txq[0]) {
-+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+
-+			if (!skb_queue_len(&txqi->queue))
-+				continue;
-+
-+			drv_wake_tx_queue(local, txqi);
-+		}
-+	}
-+
- 	skb_queue_head_init(&pending);
- 
- 	/* sync with ieee80211_tx_h_unicast_ps_buf */
-@@ -1275,8 +1323,10 @@ ieee80211_sta_ps_deliver_response(struct
- 		/* if we already have frames from software, then we can't also
- 		 * release from hardware queues
- 		 */
--		if (skb_queue_empty(&frames))
-+		if (skb_queue_empty(&frames)) {
- 			driver_release_tids |= sta->driver_buffered_tids & tids;
-+			driver_release_tids |= sta->txq_buffered_tids & tids;
-+		}
- 
- 		if (driver_release_tids) {
- 			/* If the driver has data on more than one TID then
-@@ -1447,6 +1497,9 @@ ieee80211_sta_ps_deliver_response(struct
- 
- 		sta_info_recalc_tim(sta);
- 	} else {
-+		unsigned long tids = sta->txq_buffered_tids & driver_release_tids;
-+		int tid;
-+
- 		/*
- 		 * We need to release a frame that is buffered somewhere in the
- 		 * driver ... it'll have to handle that.
-@@ -1466,8 +1519,22 @@ ieee80211_sta_ps_deliver_response(struct
- 		 * that the TID(s) became empty before returning here from the
- 		 * release function.
- 		 * Either way, however, when the driver tells us that the TID(s)
--		 * became empty we'll do the TIM recalculation.
-+		 * became empty or we find that a txq became empty, we'll do the
-+		 * TIM recalculation.
- 		 */
-+
-+		if (!sta->sta.txq[0])
-+			return;
-+
-+		for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+			struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+			if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue))
-+				continue;
-+
-+			sta_info_recalc_tim(sta);
-+			break;
-+		}
- 	}
- }
- 
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -274,6 +274,7 @@ struct sta_ampdu_mlme {
-  *	entered power saving state, these are also delivered to
-  *	the station when it leaves powersave or polls for frames
-  * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
-+ * @txq_buffered_tids: bitmap of TIDs that mac80211 has txq data buffered on
-  * @rx_packets: Number of MSDUs received from this STA
-  * @rx_bytes: Number of bytes received from this STA
-  * @last_rx: time (in jiffies) when last frame was received from this STA
-@@ -368,6 +369,7 @@ struct sta_info {
- 	struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
- 	struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
- 	unsigned long driver_buffered_tids;
-+	unsigned long txq_buffered_tids;
- 
- 	/* Updated from RX path only, no locking requirements */
- 	unsigned long rx_packets;
---- a/net/mac80211/trace.h
-+++ b/net/mac80211/trace.h
-@@ -2312,6 +2312,37 @@ TRACE_EVENT(drv_tdls_recv_channel_switch
- 	)
- );
- 
-+TRACE_EVENT(drv_wake_tx_queue,
-+	TP_PROTO(struct ieee80211_local *local,
-+		 struct ieee80211_sub_if_data *sdata,
-+		 struct txq_info *txq),
-+
-+	TP_ARGS(local, sdata, txq),
-+
-+	TP_STRUCT__entry(
-+		LOCAL_ENTRY
-+		VIF_ENTRY
-+		STA_ENTRY
-+		__field(u8, ac)
-+		__field(u8, tid)
-+	),
-+
-+	TP_fast_assign(
-+		struct ieee80211_sta *sta = txq->txq.sta;
-+
-+		LOCAL_ASSIGN;
-+		VIF_ASSIGN;
-+		STA_ASSIGN;
-+		__entry->ac = txq->txq.ac;
-+		__entry->tid = txq->txq.tid;
-+	),
-+
-+	TP_printk(
-+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " ac:%d tid:%d",
-+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->ac, __entry->tid
-+	)
-+);
-+
- #ifdef CPTCFG_MAC80211_MESSAGE_TRACING
- #undef TRACE_SYSTEM
- #define TRACE_SYSTEM mac80211_msg
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -776,12 +776,22 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
- 	return TX_CONTINUE;
- }
- 
-+static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid)
-+{
-+	u16 *seq = &sta->tid_seq[tid];
-+	__le16 ret = cpu_to_le16(*seq);
-+
-+	/* Increase the sequence number. */
-+	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+
-+	return ret;
-+}
-+
- static ieee80211_tx_result debug_noinline
- ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
- {
- 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
--	u16 *seq;
- 	u8 *qc;
- 	int tid;
- 
-@@ -832,13 +842,10 @@ ieee80211_tx_h_sequence(struct ieee80211
- 
- 	qc = ieee80211_get_qos_ctl(hdr);
- 	tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
--	seq = &tx->sta->tid_seq[tid];
- 	tx->sta->tx_msdu[tid]++;
- 
--	hdr->seq_ctrl = cpu_to_le16(*seq);
--
--	/* Increase the sequence number. */
--	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+	if (!tx->sta->sta.txq[0])
-+		hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid);
- 
- 	return TX_CONTINUE;
- }
-@@ -1067,7 +1074,7 @@ static bool ieee80211_tx_prep_agg(struct
- 		 * nothing -- this aggregation session is being started
- 		 * but that might still fail with the driver
- 		 */
--	} else {
-+	} else if (!tx->sta->sta.txq[tid]) {
- 		spin_lock(&tx->sta->lock);
- 		/*
- 		 * Need to re-check now, because we may get here
-@@ -1201,13 +1208,102 @@ ieee80211_tx_prepare(struct ieee80211_su
- 	return TX_CONTINUE;
- }
- 
-+static void ieee80211_drv_tx(struct ieee80211_local *local,
-+			     struct ieee80211_vif *vif,
-+			     struct ieee80211_sta *pubsta,
-+			     struct sk_buff *skb)
-+{
-+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
-+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+	struct ieee80211_tx_control control = {
-+		.sta = pubsta,
-+	};
-+	struct ieee80211_txq *txq = NULL;
-+	struct txq_info *txqi;
-+	u8 ac;
-+
-+	if (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)
-+		goto tx_normal;
-+
-+	if (!ieee80211_is_data(hdr->frame_control))
-+		goto tx_normal;
-+
-+	if (pubsta) {
-+		u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
-+
-+		txq = pubsta->txq[tid];
-+	} else if (vif) {
-+		txq = vif->txq;
-+	}
-+
-+	if (!txq)
-+		goto tx_normal;
-+
-+	ac = txq->ac;
-+	txqi = to_txq_info(txq);
-+	atomic_inc(&sdata->txqs_len[ac]);
-+	if (atomic_read(&sdata->txqs_len[ac]) >= local->hw.txq_ac_max_pending)
-+		netif_stop_subqueue(sdata->dev, ac);
-+
-+	skb_queue_tail(&txqi->queue, skb);
-+	drv_wake_tx_queue(local, txqi);
-+
-+	return;
-+
-+tx_normal:
-+	drv_tx(local, &control, skb);
-+}
-+
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+				     struct ieee80211_txq *txq)
-+{
-+	struct ieee80211_local *local = hw_to_local(hw);
-+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->vif);
-+	struct txq_info *txqi = container_of(txq, struct txq_info, txq);
-+	struct ieee80211_hdr *hdr;
-+	struct sk_buff *skb = NULL;
-+	u8 ac = txq->ac;
-+
-+	spin_lock_bh(&txqi->queue.lock);
-+
-+	if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags))
-+		goto out;
-+
-+	skb = __skb_dequeue(&txqi->queue);
-+	if (!skb)
-+		goto out;
-+
-+	atomic_dec(&sdata->txqs_len[ac]);
-+	if (__netif_subqueue_stopped(sdata->dev, ac))
-+		ieee80211_propagate_queue_wake(local, sdata->vif.hw_queue[ac]);
-+
-+	hdr = (struct ieee80211_hdr *)skb->data;
-+	if (txq->sta && ieee80211_is_data_qos(hdr->frame_control)) {
-+		struct sta_info *sta = container_of(txq->sta, struct sta_info,
-+						    sta);
-+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+
-+		hdr->seq_ctrl = ieee80211_tx_next_seq(sta, txq->tid);
-+		if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags))
-+			info->flags |= IEEE80211_TX_CTL_AMPDU;
-+		else
-+			info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-+	}
-+
-+out:
-+	spin_unlock_bh(&txqi->queue.lock);
-+
-+	return skb;
-+}
-+EXPORT_SYMBOL(ieee80211_tx_dequeue);
-+
- static bool ieee80211_tx_frags(struct ieee80211_local *local,
- 			       struct ieee80211_vif *vif,
- 			       struct ieee80211_sta *sta,
- 			       struct sk_buff_head *skbs,
- 			       bool txpending)
- {
--	struct ieee80211_tx_control control;
- 	struct sk_buff *skb, *tmp;
- 	unsigned long flags;
- 
-@@ -1265,10 +1361,9 @@ static bool ieee80211_tx_frags(struct ie
- 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- 
- 		info->control.vif = vif;
--		control.sta = sta;
- 
- 		__skb_unlink(skb, skbs);
--		drv_tx(local, &control, skb);
-+		ieee80211_drv_tx(local, vif, sta, skb);
- 	}
- 
- 	return true;
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -308,6 +308,11 @@ void ieee80211_propagate_queue_wake(stru
- 		for (ac = 0; ac < n_acs; ac++) {
- 			int ac_queue = sdata->vif.hw_queue[ac];
- 
-+			if (local->ops->wake_tx_queue &&
-+			    (atomic_read(&sdata->txqs_len[ac]) >
-+			     local->hw.txq_ac_max_pending))
-+				continue;
-+
- 			if (ac_queue == queue ||
- 			    (sdata->vif.cab_queue == queue &&
- 			     local->queue_stop_reasons[ac_queue] == 0 &&
-@@ -3307,3 +3312,20 @@ u8 *ieee80211_add_wmm_info_ie(u8 *buf, u
- 
- 	return buf;
- }
-+
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+			     struct sta_info *sta,
-+			     struct txq_info *txqi, int tid)
-+{
-+	skb_queue_head_init(&txqi->queue);
-+	txqi->txq.vif = &sdata->vif;
-+
-+	if (sta) {
-+		txqi->txq.sta = &sta->sta;
-+		sta->sta.txq[tid] = &txqi->txq;
-+		txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
-+	} else {
-+		sdata->vif.txq = &txqi->txq;
-+		txqi->txq.ac = IEEE80211_AC_BE;
-+	}
-+}
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1176,6 +1176,7 @@ static void sta_ps_start(struct sta_info
- 	struct ieee80211_sub_if_data *sdata = sta->sdata;
- 	struct ieee80211_local *local = sdata->local;
- 	struct ps_data *ps;
-+	int tid;
- 
- 	if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
- 	    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-@@ -1189,6 +1190,18 @@ static void sta_ps_start(struct sta_info
- 		drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta);
- 	ps_dbg(sdata, "STA %pM aid %d enters power save mode\n",
- 	       sta->sta.addr, sta->sta.aid);
-+
-+	if (!sta->sta.txq[0])
-+		return;
-+
-+	for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+		struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+		if (!skb_queue_len(&txqi->queue))
-+			set_bit(tid, &sta->txq_buffered_tids);
-+		else
-+			clear_bit(tid, &sta->txq_buffered_tids);
-+	}
- }
- 
- static void sta_ps_end(struct sta_info *sta)
---- a/net/mac80211/agg-tx.c
-+++ b/net/mac80211/agg-tx.c
-@@ -188,6 +188,43 @@ ieee80211_wake_queue_agg(struct ieee8021
- 	__release(agg_queue);
- }
- 
-+static void
-+ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
-+{
-+	struct ieee80211_txq *txq = sta->sta.txq[tid];
-+	struct txq_info *txqi;
-+
-+	if (!txq)
-+		return;
-+
-+	txqi = to_txq_info(txq);
-+
-+	/* Lock here to protect against further seqno updates on dequeue */
-+	spin_lock_bh(&txqi->queue.lock);
-+	set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+	spin_unlock_bh(&txqi->queue.lock);
-+}
-+
-+static void
-+ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
-+{
-+	struct ieee80211_txq *txq = sta->sta.txq[tid];
-+	struct txq_info *txqi;
-+
-+	if (!txq)
-+		return;
-+
-+	txqi = to_txq_info(txq);
-+
-+	if (enable)
-+		set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+	else
-+		clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+
-+	clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+	drv_wake_tx_queue(sta->sdata->local, txqi);
-+}
-+
- /*
-  * splice packets from the STA's pending to the local pending,
-  * requires a call to ieee80211_agg_splice_finish later
-@@ -247,6 +284,7 @@ static void ieee80211_remove_tid_tx(stru
- 	ieee80211_assign_tid_tx(sta, tid, NULL);
- 
- 	ieee80211_agg_splice_finish(sta->sdata, tid);
-+	ieee80211_agg_start_txq(sta, tid, false);
- 
- 	kfree_rcu(tid_tx, rcu_head);
- }
-@@ -418,6 +456,8 @@ void ieee80211_tx_ba_session_handle_star
- 	 */
- 	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
- 
-+	ieee80211_agg_stop_txq(sta, tid);
-+
- 	/*
- 	 * Make sure no packets are being processed. This ensures that
- 	 * we have a valid starting sequence number and that in-flight
-@@ -440,6 +480,8 @@ void ieee80211_tx_ba_session_handle_star
- 		ieee80211_agg_splice_finish(sdata, tid);
- 		spin_unlock_bh(&sta->lock);
- 
-+		ieee80211_agg_start_txq(sta, tid, false);
-+
- 		kfree_rcu(tid_tx, rcu_head);
- 		return;
- 	}
-@@ -666,6 +708,8 @@ static void ieee80211_agg_tx_operational
- 	ieee80211_agg_splice_finish(sta->sdata, tid);
- 
- 	spin_unlock_bh(&sta->lock);
-+
-+	ieee80211_agg_start_txq(sta, tid, true);
- }
- 
- void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
diff --git a/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch
new file mode 100644
index 0000000..4faac0d
--- /dev/null
+++ b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch
@@ -0,0 +1,121 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 2 Jul 2015 15:20:56 +0200
+Subject: [PATCH] ath9k: limit retries for powersave response frames
+
+In some cases, the channel might be busy enough that an ath9k AP's
+response to PS-Poll frames might be too slow and the station has already
+gone to sleep. To avoid wasting too much airtime on this, limit the
+number of retries on such frames and ensure that no sample rate gets
+used.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -147,10 +147,25 @@ static void ath_send_bar(struct ath_atx_
+ }
+ 
+ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+-			  struct ath_buf *bf)
++			  struct ath_buf *bf, bool ps)
+ {
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
++
++	if (ps) {
++		/* Clear the first rate to avoid using a sample rate for PS frames */
++		info->control.rates[0].idx = -1;
++		info->control.rates[0].count = 0;
++	}
++
+ 	ieee80211_get_tx_rates(vif, sta, bf->bf_mpdu, bf->rates,
+ 			       ARRAY_SIZE(bf->rates));
++	if (!ps)
++		return;
++
++	if (bf->rates[0].count > 2)
++		bf->rates[0].count = 2;
++
++	bf->rates[1].idx = -1;
+ }
+ 
+ static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+@@ -1430,7 +1445,7 @@ ath_tx_form_burst(struct ath_softc *sc,
+ 		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ 			break;
+ 
+-		ath_set_rates(tid->an->vif, tid->an->sta, bf);
++		ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ 	} while (1);
+ }
+ 
+@@ -1461,7 +1476,7 @@ static bool ath_tx_sched_aggr(struct ath
+ 		return false;
+ 	}
+ 
+-	ath_set_rates(tid->an->vif, tid->an->sta, bf);
++	ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ 	if (aggr)
+ 		last = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf,
+ 					tid_q, &aggr_len);
+@@ -1653,7 +1668,7 @@ void ath9k_release_buffered_frames(struc
+ 
+ 			__skb_unlink(bf->bf_mpdu, tid_q);
+ 			list_add_tail(&bf->list, &bf_q);
+-			ath_set_rates(tid->an->vif, tid->an->sta, bf);
++			ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
+ 			if (bf_isampdu(bf)) {
+ 				ath_tx_addto_baw(sc, tid, bf);
+ 				bf->bf_state.bf_type &= ~BUF_AGGR;
+@@ -2318,7 +2333,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 	struct ath_txq *txq = txctl->txq;
+ 	struct ath_atx_tid *tid = NULL;
+ 	struct ath_buf *bf;
+-	bool queue, skip_uapsd = false, ps_resp;
++	bool queue, ps_resp;
+ 	int q, ret;
+ 
+ 	if (vif)
+@@ -2365,13 +2380,13 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 		if (!txctl->an)
+ 			txctl->an = &avp->mcast_node;
+ 		queue = true;
+-		skip_uapsd = true;
++		ps_resp = false;
+ 	}
+ 
+ 	if (txctl->an && queue)
+ 		tid = ath_get_skb_tid(sc, txctl->an, skb);
+ 
+-	if (!skip_uapsd && ps_resp) {
++	if (ps_resp) {
+ 		ath_txq_unlock(sc, txq);
+ 		txq = sc->tx.uapsdq;
+ 		ath_txq_lock(sc, txq);
+@@ -2409,7 +2424,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 	if (txctl->paprd)
+ 		bf->bf_state.bfs_paprd_timestamp = jiffies;
+ 
+-	ath_set_rates(vif, sta, bf);
++	ath_set_rates(vif, sta, bf, ps_resp);
+ 	ath_tx_send_normal(sc, txq, tid, skb);
+ 
+ out:
+@@ -2448,7 +2463,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
+ 			break;
+ 
+ 		bf->bf_lastbf = bf;
+-		ath_set_rates(vif, NULL, bf);
++		ath_set_rates(vif, NULL, bf, false);
+ 		ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
+ 		duration += info.rates[0].PktDuration;
+ 		if (bf_tail)
+@@ -2968,7 +2983,7 @@ int ath9k_tx99_send(struct ath_softc *sc
+ 		return -EINVAL;
+ 	}
+ 
+-	ath_set_rates(sc->tx99_vif, NULL, bf);
++	ath_set_rates(sc->tx99_vif, NULL, bf, false);
+ 
+ 	ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
+ 	ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
diff --git a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch b/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch
deleted file mode 100644
index 465d943..0000000
--- a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 11 Mar 2015 09:14:15 +0100
-Subject: [PATCH] mac80211: lock rate control
-
-Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate
-control aren't properly taking concurrency into account. It's
-likely that the same is true for other rate control algorithms.
-
-In the case of minstrel this manifests itself in crashes when an
-update and other data access are run concurrently, for example
-when the stations change bandwidth or similar. In iwlwifi, this
-can cause firmware crashes.
-
-Since fixing all rate control algorithms will be very difficult,
-just provide locking for invocations. This protects the internal
-data structures the algorithms maintain.
-
-I've manipulated hostapd to test this, by having it change its
-advertised bandwidth roughly ever 150ms. At the same time, I'm
-running a flood ping between the client and the AP, which causes
-this race of update vs. get_rate/status to easily happen on the
-client. With this change, the system survives this test.
-
-Reported-by: Sven Eckelmann <sven@open-mesh.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/rate.c
-+++ b/net/mac80211/rate.c
-@@ -683,7 +683,13 @@ void rate_control_get_rate(struct ieee80
- 	if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
- 		return;
- 
--	ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+	if (ista) {
-+		spin_lock_bh(&sta->rate_ctrl_lock);
-+		ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+		spin_unlock_bh(&sta->rate_ctrl_lock);
-+	} else {
-+		ref->ops->get_rate(ref->priv, NULL, NULL, txrc);
-+	}
- 
- 	if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_RC_TABLE)
- 		return;
---- a/net/mac80211/rate.h
-+++ b/net/mac80211/rate.h
-@@ -42,10 +42,12 @@ static inline void rate_control_tx_statu
- 	if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
- 		return;
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	if (ref->ops->tx_status)
- 		ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
- 	else
- 		ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- }
- 
- static inline void
-@@ -64,7 +66,9 @@ rate_control_tx_status_noskb(struct ieee
- 	if (WARN_ON_ONCE(!ref->ops->tx_status_noskb))
- 		return;
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- }
- 
- static inline void rate_control_rate_init(struct sta_info *sta)
-@@ -91,8 +95,10 @@ static inline void rate_control_rate_ini
- 
- 	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
- 
-+	spin_lock_bh(&sta->rate_ctrl_lock);
- 	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
- 			    priv_sta);
-+	spin_unlock_bh(&sta->rate_ctrl_lock);
- 	rcu_read_unlock();
- 	set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
- }
-@@ -115,18 +121,20 @@ static inline void rate_control_rate_upd
- 			return;
- 		}
- 
-+		spin_lock_bh(&sta->rate_ctrl_lock);
- 		ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
- 				      ista, priv_sta, changed);
-+		spin_unlock_bh(&sta->rate_ctrl_lock);
- 		rcu_read_unlock();
- 	}
- 	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
- }
- 
- static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
--					   struct ieee80211_sta *sta,
--					   gfp_t gfp)
-+					   struct sta_info *sta, gfp_t gfp)
- {
--	return ref->ops->alloc_sta(ref->priv, sta, gfp);
-+	spin_lock_init(&sta->rate_ctrl_lock);
-+	return ref->ops->alloc_sta(ref->priv, &sta->sta, gfp);
- }
- 
- static inline void rate_control_free_sta(struct sta_info *sta)
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -286,7 +286,7 @@ static int sta_prepare_rate_control(stru
- 
- 	sta->rate_ctrl = local->rate_ctrl;
- 	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
--						     &sta->sta, gfp);
-+						     sta, gfp);
- 	if (!sta->rate_ctrl_priv)
- 		return -ENOMEM;
- 
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -349,6 +349,7 @@ struct sta_info {
- 	u8 ptk_idx;
- 	struct rate_control_ref *rate_ctrl;
- 	void *rate_ctrl_priv;
-+	spinlock_t rate_ctrl_lock;
- 	spinlock_t lock;
- 
- 	struct work_struct drv_deliver_wk;
diff --git a/package/kernel/mac80211/patches/302-ath10k-Delay-device-access-after-cold-reset.patch b/package/kernel/mac80211/patches/302-ath10k-Delay-device-access-after-cold-reset.patch
new file mode 100644
index 0000000..820aa9a
--- /dev/null
+++ b/package/kernel/mac80211/patches/302-ath10k-Delay-device-access-after-cold-reset.patch
@@ -0,0 +1,56 @@
+From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
+Date: Fri, 3 Jul 2015 11:45:42 +0530
+Subject: [PATCH] ath10k: Delay device access after cold reset
+
+It is observed that during cold reset pcie access right
+after a write operation to SOC_GLOBAL_RESET_ADDRESS causes
+Data Bus Error and system hard lockup. The reason
+for bus error is that pcie needs some time to get
+back to stable state for any transaction during cold reset. Add
+delay of 20 msecs after write of SOC_GLOBAL_RESET_ADDRESS
+to fix this issue.
+
+Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -2761,7 +2761,6 @@ static int ath10k_pci_wait_for_target_in
+ 
+ static int ath10k_pci_cold_reset(struct ath10k *ar)
+ {
+-	int i;
+ 	u32 val;
+ 
+ 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n");
+@@ -2777,23 +2776,18 @@ static int ath10k_pci_cold_reset(struct
+ 	val |= 1;
+ 	ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
+ 
+-	for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+-		if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
+-					  RTC_STATE_COLD_RESET_MASK)
+-			break;
+-		msleep(1);
+-	}
++	/* After writing into SOC_GLOBAL_RESET to put device into
++	 * reset and pulling out of reset pcie may not be stable
++	 * for any immediate pcie register access and cause bus error,
++	 * add delay before any pcie access request to fix this issue.
++	 */
++	msleep(20);
+ 
+ 	/* Pull Target, including PCIe, out of RESET. */
+ 	val &= ~1;
+ 	ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
+ 
+-	for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+-		if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
+-					    RTC_STATE_COLD_RESET_MASK))
+-			break;
+-		msleep(1);
+-	}
++	msleep(20);
+ 
+ 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n");
+ 
diff --git a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch b/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch
deleted file mode 100644
index e54e16e..0000000
--- a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:29 +0100
-Subject: [PATCH] ath9k: restart only triggering DFS detector line
-
-To support HT40 DFS mode, a triggering detector must
-reset only itself but not other detector lines.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/dfs_pattern_detector.c
-+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
-@@ -289,7 +289,7 @@ dpd_add_pulse(struct dfs_pattern_detecto
- 				"count=%d, count_false=%d\n",
- 				event->freq, pd->rs->type_id,
- 				ps->pri, ps->count, ps->count_falses);
--			channel_detector_reset(dpd, cd);
-+			pd->reset(pd, dpd->last_pulse_ts);
- 			return true;
- 		}
- 	}
diff --git a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch b/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch
deleted file mode 100644
index ed268ea..0000000
--- a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:30 +0100
-Subject: [PATCH] ath9k: add DFS support for extension channel
-
-In HT40 modes, pulse events on primary and extension
-channel are processed individually. If valid, a pulse
-event will be fed into the detector
-* for primary frequency, or
-* for extension frequency (+/-20MHz based on HT40-mode)
-* or both
-
-With that, a 40MHz radar will result in two individual
-radar events.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/dfs.c
-+++ b/drivers/net/wireless/ath/ath9k/dfs.c
-@@ -126,8 +126,19 @@ ath9k_postprocess_radar_event(struct ath
- 	DFS_STAT_INC(sc, pulses_detected);
- 	return true;
- }
--#undef PRI_CH_RADAR_FOUND
--#undef EXT_CH_RADAR_FOUND
-+
-+static void
-+ath9k_dfs_process_radar_pulse(struct ath_softc *sc, struct pulse_event *pe)
-+{
-+	struct dfs_pattern_detector *pd = sc->dfs_detector;
-+	DFS_STAT_INC(sc, pulses_processed);
-+	if (pd == NULL)
-+		return;
-+	if (!pd->add_pulse(pd, pe))
-+		return;
-+	DFS_STAT_INC(sc, radar_detected);
-+	ieee80211_radar_detected(sc->hw);
-+}
- 
- /*
-  * DFS: check PHY-error for radar pulse and feed the detector
-@@ -176,18 +187,21 @@ void ath9k_dfs_process_phyerr(struct ath
- 	ard.pulse_length_pri = vdata_end[-3];
- 	pe.freq = ah->curchan->channel;
- 	pe.ts = mactime;
--	if (ath9k_postprocess_radar_event(sc, &ard, &pe)) {
--		struct dfs_pattern_detector *pd = sc->dfs_detector;
--		ath_dbg(common, DFS,
--			"ath9k_dfs_process_phyerr: channel=%d, ts=%llu, "
--			"width=%d, rssi=%d, delta_ts=%llu\n",
--			pe.freq, pe.ts, pe.width, pe.rssi,
--			pe.ts - sc->dfs_prev_pulse_ts);
--		sc->dfs_prev_pulse_ts = pe.ts;
--		DFS_STAT_INC(sc, pulses_processed);
--		if (pd != NULL && pd->add_pulse(pd, &pe)) {
--			DFS_STAT_INC(sc, radar_detected);
--			ieee80211_radar_detected(sc->hw);
--		}
-+	if (!ath9k_postprocess_radar_event(sc, &ard, &pe))
-+		return;
-+
-+	ath_dbg(common, DFS,
-+		"ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, "
-+		"width=%d, rssi=%d, delta_ts=%llu\n",
-+		ard.pulse_bw_info, pe.freq, pe.ts, pe.width, pe.rssi,
-+		pe.ts - sc->dfs_prev_pulse_ts);
-+	sc->dfs_prev_pulse_ts = pe.ts;
-+	if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND)
-+		ath9k_dfs_process_radar_pulse(sc, &pe);
-+	if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
-+		pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20;
-+		ath9k_dfs_process_radar_pulse(sc, &pe);
- 	}
- }
-+#undef PRI_CH_RADAR_FOUND
-+#undef EXT_CH_RADAR_FOUND
diff --git a/package/kernel/mac80211/patches/303-ath9k-add-fast-xmit-support.patch b/package/kernel/mac80211/patches/303-ath9k-add-fast-xmit-support.patch
new file mode 100644
index 0000000..139015c
--- /dev/null
+++ b/package/kernel/mac80211/patches/303-ath9k-add-fast-xmit-support.patch
@@ -0,0 +1,17 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Mon, 11 May 2015 18:35:20 +0200
+Subject: [PATCH] ath9k: add fast-xmit support
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -826,6 +826,7 @@ static void ath9k_set_hw_capab(struct at
+ 	ieee80211_hw_set(hw, SIGNAL_DBM);
+ 	ieee80211_hw_set(hw, RX_INCLUDES_FCS);
+ 	ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
++	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
+ 
+ 	if (ath9k_ps_enable)
+ 		ieee80211_hw_set(hw, SUPPORTS_PS);
diff --git a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch b/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch
deleted file mode 100644
index e1eab64..0000000
--- a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:31 +0100
-Subject: [PATCH] ath9k: allow 40MHz radar detection width
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -763,7 +763,8 @@ static const struct ieee80211_iface_comb
- 		.num_different_channels = 1,
- 		.beacon_int_infra_match = true,
- 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
--					BIT(NL80211_CHAN_WIDTH_20),
-+					BIT(NL80211_CHAN_WIDTH_20) |
-+					BIT(NL80211_CHAN_WIDTH_40),
- 	}
- #endif
- };
diff --git a/package/kernel/mac80211/patches/304-ath9k-remove-struct-ath_atx_ac.patch b/package/kernel/mac80211/patches/304-ath9k-remove-struct-ath_atx_ac.patch
new file mode 100644
index 0000000..9f04276
--- /dev/null
+++ b/package/kernel/mac80211/patches/304-ath9k-remove-struct-ath_atx_ac.patch
@@ -0,0 +1,385 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sat, 4 Apr 2015 18:39:06 +0200
+Subject: [PATCH] ath9k: remove struct ath_atx_ac
+
+struct ath_atx_ac contains a list of active TIDs belonging to one WMM AC.
+This patch changes the code to track active station TIDs in the txq directly.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -173,14 +173,6 @@ struct ath_txq {
+ 	struct sk_buff_head complete_q;
+ };
+ 
+-struct ath_atx_ac {
+-	struct ath_txq *txq;
+-	struct list_head list;
+-	struct list_head tid_q;
+-	bool clear_ps_filter;
+-	bool sched;
+-};
+-
+ struct ath_frame_info {
+ 	struct ath_buf *bf;
+ 	u16 framelen;
+@@ -243,7 +235,7 @@ struct ath_atx_tid {
+ 	struct sk_buff_head buf_q;
+ 	struct sk_buff_head retry_q;
+ 	struct ath_node *an;
+-	struct ath_atx_ac *ac;
++	struct ath_txq *txq;
+ 	unsigned long tx_buf[BITS_TO_LONGS(ATH_TID_MAX_BUFS)];
+ 	u16 seq_start;
+ 	u16 seq_next;
+@@ -255,6 +247,7 @@ struct ath_atx_tid {
+ 	s8 bar_index;
+ 	bool sched;
+ 	bool active;
++	bool clear_ps_filter;
+ };
+ 
+ struct ath_node {
+@@ -262,7 +255,6 @@ struct ath_node {
+ 	struct ieee80211_sta *sta; /* station struct we're part of */
+ 	struct ieee80211_vif *vif; /* interface with which we're associated */
+ 	struct ath_atx_tid tid[IEEE80211_NUM_TIDS];
+-	struct ath_atx_ac ac[IEEE80211_NUM_ACS];
+ 
+ 	u16 maxampdu;
+ 	u8 mpdudensity;
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -106,7 +106,6 @@ void ath_txq_unlock_complete(struct ath_
+ static void ath_tx_queue_tid(struct ath_softc *sc, struct ath_txq *txq,
+ 			     struct ath_atx_tid *tid)
+ {
+-	struct ath_atx_ac *ac = tid->ac;
+ 	struct list_head *list;
+ 	struct ath_vif *avp = (struct ath_vif *) tid->an->vif->drv_priv;
+ 	struct ath_chanctx *ctx = avp->chanctx;
+@@ -118,15 +117,8 @@ static void ath_tx_queue_tid(struct ath_
+ 		return;
+ 
+ 	tid->sched = true;
+-	list_add_tail(&tid->list, &ac->tid_q);
+-
+-	if (ac->sched)
+-		return;
+-
+-	ac->sched = true;
+-
+ 	list = &ctx->acq[TID_TO_WME_AC(tid->tidno)];
+-	list_add_tail(&ac->list, list);
++	list_add_tail(&tid->list, list);
+ }
+ 
+ static struct ath_frame_info *get_frame_info(struct sk_buff *skb)
+@@ -223,7 +215,7 @@ static struct sk_buff *ath_tid_dequeue(s
+ static void
+ ath_tx_tid_change_state(struct ath_softc *sc, struct ath_atx_tid *tid)
+ {
+-	struct ath_txq *txq = tid->ac->txq;
++	struct ath_txq *txq = tid->txq;
+ 	struct ieee80211_tx_info *tx_info;
+ 	struct sk_buff *skb, *tskb;
+ 	struct ath_buf *bf;
+@@ -252,7 +244,7 @@ ath_tx_tid_change_state(struct ath_softc
+ 
+ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+ {
+-	struct ath_txq *txq = tid->ac->txq;
++	struct ath_txq *txq = tid->txq;
+ 	struct sk_buff *skb;
+ 	struct ath_buf *bf;
+ 	struct list_head bf_head;
+@@ -659,7 +651,7 @@ static void ath_tx_complete_aggr(struct
+ 			ath_tx_queue_tid(sc, txq, tid);
+ 
+ 			if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY))
+-				tid->ac->clear_ps_filter = true;
++				tid->clear_ps_filter = true;
+ 		}
+ 	}
+ 
+@@ -749,7 +741,7 @@ static u32 ath_lookup_rate(struct ath_so
+ 	struct ieee80211_tx_rate *rates;
+ 	u32 max_4ms_framelen, frmlen;
+ 	u16 aggr_limit, bt_aggr_limit, legacy = 0;
+-	int q = tid->ac->txq->mac80211_qnum;
++	int q = tid->txq->mac80211_qnum;
+ 	int i;
+ 
+ 	skb = bf->bf_mpdu;
+@@ -1486,8 +1478,8 @@ static bool ath_tx_sched_aggr(struct ath
+ 	if (list_empty(&bf_q))
+ 		return false;
+ 
+-	if (tid->ac->clear_ps_filter || tid->an->no_ps_filter) {
+-		tid->ac->clear_ps_filter = false;
++	if (tid->clear_ps_filter || tid->an->no_ps_filter) {
++		tid->clear_ps_filter = false;
+ 		tx_info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ 	}
+ 
+@@ -1506,7 +1498,7 @@ int ath_tx_aggr_start(struct ath_softc *
+ 
+ 	an = (struct ath_node *)sta->drv_priv;
+ 	txtid = ATH_AN_2_TID(an, tid);
+-	txq = txtid->ac->txq;
++	txq = txtid->txq;
+ 
+ 	ath_txq_lock(sc, txq);
+ 
+@@ -1540,7 +1532,7 @@ void ath_tx_aggr_stop(struct ath_softc *
+ {
+ 	struct ath_node *an = (struct ath_node *)sta->drv_priv;
+ 	struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
+-	struct ath_txq *txq = txtid->ac->txq;
++	struct ath_txq *txq = txtid->txq;
+ 
+ 	ath_txq_lock(sc, txq);
+ 	txtid->active = false;
+@@ -1553,7 +1545,6 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ 		       struct ath_node *an)
+ {
+ 	struct ath_atx_tid *tid;
+-	struct ath_atx_ac *ac;
+ 	struct ath_txq *txq;
+ 	bool buffered;
+ 	int tidno;
+@@ -1561,8 +1552,7 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ 	for (tidno = 0, tid = &an->tid[tidno];
+ 	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
+ 
+-		ac = tid->ac;
+-		txq = ac->txq;
++		txq = tid->txq;
+ 
+ 		ath_txq_lock(sc, txq);
+ 
+@@ -1576,11 +1566,6 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ 		tid->sched = false;
+ 		list_del(&tid->list);
+ 
+-		if (ac->sched) {
+-			ac->sched = false;
+-			list_del(&ac->list);
+-		}
+-
+ 		ath_txq_unlock(sc, txq);
+ 
+ 		ieee80211_sta_set_buffered(sta, tidno, buffered);
+@@ -1590,18 +1575,16 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an)
+ {
+ 	struct ath_atx_tid *tid;
+-	struct ath_atx_ac *ac;
+ 	struct ath_txq *txq;
+ 	int tidno;
+ 
+ 	for (tidno = 0, tid = &an->tid[tidno];
+ 	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
+ 
+-		ac = tid->ac;
+-		txq = ac->txq;
++		txq = tid->txq;
+ 
+ 		ath_txq_lock(sc, txq);
+-		ac->clear_ps_filter = true;
++		tid->clear_ps_filter = true;
+ 
+ 		if (ath_tid_has_buffered(tid)) {
+ 			ath_tx_queue_tid(sc, txq, tid);
+@@ -1621,7 +1604,7 @@ void ath_tx_aggr_resume(struct ath_softc
+ 
+ 	an = (struct ath_node *)sta->drv_priv;
+ 	tid = ATH_AN_2_TID(an, tidno);
+-	txq = tid->ac->txq;
++	txq = tid->txq;
+ 
+ 	ath_txq_lock(sc, txq);
+ 
+@@ -1660,7 +1643,7 @@ void ath9k_release_buffered_frames(struc
+ 
+ 		tid = ATH_AN_2_TID(an, i);
+ 
+-		ath_txq_lock(sc, tid->ac->txq);
++		ath_txq_lock(sc, tid->txq);
+ 		while (nframes > 0) {
+ 			bf = ath_tx_get_tid_subframe(sc, sc->tx.uapsdq, tid, &tid_q);
+ 			if (!bf)
+@@ -1684,7 +1667,7 @@ void ath9k_release_buffered_frames(struc
+ 			if (an->sta && !ath_tid_has_buffered(tid))
+ 				ieee80211_sta_set_buffered(an->sta, i, false);
+ 		}
+-		ath_txq_unlock_complete(sc, tid->ac->txq);
++		ath_txq_unlock_complete(sc, tid->txq);
+ 	}
+ 
+ 	if (list_empty(&bf_q))
+@@ -1933,9 +1916,8 @@ void ath_tx_cleanupq(struct ath_softc *s
+ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
+ {
+ 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+-	struct ath_atx_ac *ac, *last_ac;
+ 	struct ath_atx_tid *tid, *last_tid;
+-	struct list_head *ac_list;
++	struct list_head *tid_list;
+ 	bool sent = false;
+ 
+ 	if (txq->mac80211_qnum < 0)
+@@ -1945,63 +1927,46 @@ void ath_txq_schedule(struct ath_softc *
+ 		return;
+ 
+ 	spin_lock_bh(&sc->chan_lock);
+-	ac_list = &sc->cur_chan->acq[txq->mac80211_qnum];
++	tid_list = &sc->cur_chan->acq[txq->mac80211_qnum];
+ 
+-	if (list_empty(ac_list)) {
++	if (list_empty(tid_list)) {
+ 		spin_unlock_bh(&sc->chan_lock);
+ 		return;
+ 	}
+ 
+ 	rcu_read_lock();
+ 
+-	last_ac = list_entry(ac_list->prev, struct ath_atx_ac, list);
+-	while (!list_empty(ac_list)) {
++	last_tid = list_entry(tid_list->prev, struct ath_atx_tid, list);
++	while (!list_empty(tid_list)) {
+ 		bool stop = false;
+ 
+ 		if (sc->cur_chan->stopped)
+ 			break;
+ 
+-		ac = list_first_entry(ac_list, struct ath_atx_ac, list);
+-		last_tid = list_entry(ac->tid_q.prev, struct ath_atx_tid, list);
+-		list_del(&ac->list);
+-		ac->sched = false;
+-
+-		while (!list_empty(&ac->tid_q)) {
+-
+-			tid = list_first_entry(&ac->tid_q, struct ath_atx_tid,
+-					       list);
+-			list_del(&tid->list);
+-			tid->sched = false;
+-
+-			if (ath_tx_sched_aggr(sc, txq, tid, &stop))
+-				sent = true;
+-
+-			/*
+-			 * add tid to round-robin queue if more frames
+-			 * are pending for the tid
+-			 */
+-			if (ath_tid_has_buffered(tid))
+-				ath_tx_queue_tid(sc, txq, tid);
++		tid = list_first_entry(tid_list, struct ath_atx_tid, list);
++		list_del(&tid->list);
++		tid->sched = false;
+ 
+-			if (stop || tid == last_tid)
+-				break;
+-		}
++		if (ath_tx_sched_aggr(sc, txq, tid, &stop))
++			sent = true;
+ 
+-		if (!list_empty(&ac->tid_q) && !ac->sched) {
+-			ac->sched = true;
+-			list_add_tail(&ac->list, ac_list);
+-		}
++		/*
++		 * add tid to round-robin queue if more frames
++		 * are pending for the tid
++		 */
++		if (ath_tid_has_buffered(tid))
++			ath_tx_queue_tid(sc, txq, tid);
+ 
+ 		if (stop)
+ 			break;
+ 
+-		if (ac == last_ac) {
++		if (tid == last_tid) {
+ 			if (!sent)
+ 				break;
+ 
+ 			sent = false;
+-			last_ac = list_entry(ac_list->prev,
+-					     struct ath_atx_ac, list);
++			last_tid = list_entry(tid_list->prev,
++					      struct ath_atx_tid, list);
+ 		}
+ 	}
+ 
+@@ -2391,10 +2356,10 @@ int ath_tx_start(struct ieee80211_hw *hw
+ 		txq = sc->tx.uapsdq;
+ 		ath_txq_lock(sc, txq);
+ 	} else if (txctl->an && queue) {
+-		WARN_ON(tid->ac->txq != txctl->txq);
++		WARN_ON(tid->txq != txctl->txq);
+ 
+ 		if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
+-			tid->ac->clear_ps_filter = true;
++			tid->clear_ps_filter = true;
+ 
+ 		/*
+ 		 * Add this frame to software queue for scheduling later
+@@ -2888,7 +2853,6 @@ int ath_tx_init(struct ath_softc *sc, in
+ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
+ {
+ 	struct ath_atx_tid *tid;
+-	struct ath_atx_ac *ac;
+ 	int tidno, acno;
+ 
+ 	for (tidno = 0, tid = &an->tid[tidno];
+@@ -2901,24 +2865,16 @@ void ath_tx_node_init(struct ath_softc *
+ 		tid->baw_head  = tid->baw_tail = 0;
+ 		tid->sched     = false;
+ 		tid->active	   = false;
++		tid->clear_ps_filter = true;
+ 		__skb_queue_head_init(&tid->buf_q);
+ 		__skb_queue_head_init(&tid->retry_q);
+ 		acno = TID_TO_WME_AC(tidno);
+-		tid->ac = &an->ac[acno];
+-	}
+-
+-	for (acno = 0, ac = &an->ac[acno];
+-	     acno < IEEE80211_NUM_ACS; acno++, ac++) {
+-		ac->sched    = false;
+-		ac->clear_ps_filter = true;
+-		ac->txq = sc->tx.txq_map[acno];
+-		INIT_LIST_HEAD(&ac->tid_q);
++		tid->txq = sc->tx.txq_map[acno];
+ 	}
+ }
+ 
+ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
+ {
+-	struct ath_atx_ac *ac;
+ 	struct ath_atx_tid *tid;
+ 	struct ath_txq *txq;
+ 	int tidno;
+@@ -2926,8 +2882,7 @@ void ath_tx_node_cleanup(struct ath_soft
+ 	for (tidno = 0, tid = &an->tid[tidno];
+ 	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
+ 
+-		ac = tid->ac;
+-		txq = ac->txq;
++		txq = tid->txq;
+ 
+ 		ath_txq_lock(sc, txq);
+ 
+@@ -2936,11 +2891,6 @@ void ath_tx_node_cleanup(struct ath_soft
+ 			tid->sched = false;
+ 		}
+ 
+-		if (ac->sched) {
+-			list_del(&ac->list);
+-			tid->ac->sched = false;
+-		}
+-
+ 		ath_tid_drain(sc, txq, tid);
+ 		tid->active = false;
+ 
diff --git a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch b/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
deleted file mode 100644
index 4cfa53f..0000000
--- a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:10 +0300
-Subject: [PATCH] ath5k: channel change fix
-
-ath5k updates the channel pointer and after that it stops the Rx logic
-and apply channel to HW. In case of channel switch, such sequence
-creates a small window when a frame, which is received on the old
-channel is considered as a frame received on the new one.
-
-The most notable consequence of this situation occurs during the switch
-from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received
-with CCK rate, e.g. beacon received at the 1mbps, causes the following
-warning:
-
-  WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
-  invalid hw_rix: 1a
-  [..]
-  Call Trace:
-  [<802656a8>] show_stack+0x48/0x70
-  [<802dd92c>] warn_slowpath_common+0x88/0xbc
-  [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
-  [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
-  [<8028ac64>] tasklet_action+0x8c/0xf0
-  [<80075804>] __do_softirq+0x180/0x32c
-  [<80196ce8>] irq_exit+0x54/0x70
-  [<80041848>] ret_from_irq+0x0/0x4
-  [<80182fdc>] ioread32+0x4/0xc
-  [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
-  [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
-  [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
-  [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
-  [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
-  [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
-  [<8022c3f4>] process_one_work+0x28c/0x400
-  [<802df8f8>] worker_thread+0x258/0x3c0
-  [<801b5710>] kthread+0xe0/0xec
-  [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-The easiest way to reproduce this warning is to run scan with dualband
-NIC in noisy environments, when the channel 11 runs multiple APs. In my
-tests if the APs num >= 12, the warning appears in the first few
-seconds of scanning.
-
-In order to fix this, the Rx disable code moved to a higher level and
-placed before the channel pointer update. This is also makes the code a
-bit more symmetrical, since we disable and enable the Rx in the same
-function.
-
-In fact, at the pointer update time new frames should not appear,
-because interrupt generation at this point should already be disabled.
-The next patch should address this issue.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -2858,7 +2858,7 @@ ath5k_reset(struct ath5k_hw *ah, struct
- {
- 	struct ath_common *common = ath5k_hw_common(ah);
- 	int ret, ani_mode;
--	bool fast;
-+	bool fast = chan && modparam_fastchanswitch ? 1 : 0;
- 
- 	ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
- 
-@@ -2876,11 +2876,29 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 	 * so we should also free any remaining
- 	 * tx buffers */
- 	ath5k_drain_tx_buffs(ah);
-+
-+	/* Stop PCU */
-+	ath5k_hw_stop_rx_pcu(ah);
-+
-+	/* Stop DMA
-+	 *
-+	 * Note: If DMA didn't stop continue
-+	 * since only a reset will fix it.
-+	 */
-+	ret = ath5k_hw_dma_stop(ah);
-+
-+	/* RF Bus grant won't work if we have pending
-+	 * frames
-+	 */
-+	if (ret && fast) {
-+		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
-+			  "DMA didn't stop, falling back to normal reset\n");
-+		fast = false;
-+	}
-+
- 	if (chan)
- 		ah->curchan = chan;
- 
--	fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
--
- 	ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
- 	if (ret) {
- 		ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
---- a/drivers/net/wireless/ath/ath5k/reset.c
-+++ b/drivers/net/wireless/ath/ath5k/reset.c
-@@ -1169,30 +1169,6 @@ ath5k_hw_reset(struct ath5k_hw *ah, enum
- 	if (ah->ah_version == AR5K_AR5212)
- 		ath5k_hw_set_sleep_clock(ah, false);
- 
--	/*
--	 * Stop PCU
--	 */
--	ath5k_hw_stop_rx_pcu(ah);
--
--	/*
--	 * Stop DMA
--	 *
--	 * Note: If DMA didn't stop continue
--	 * since only a reset will fix it.
--	 */
--	ret = ath5k_hw_dma_stop(ah);
--
--	/* RF Bus grant won't work if we have pending
--	 * frames */
--	if (ret && fast) {
--		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
--			"DMA didn't stop, falling back to normal reset\n");
--		fast = false;
--		/* Non fatal, just continue with
--		 * normal reset */
--		ret = 0;
--	}
--
- 	mode = channel->hw_value;
- 	switch (mode) {
- 	case AR5K_MODE_11A:
diff --git a/package/kernel/mac80211/patches/305-ath9k-remove-the-sched-field-in-struct-ath_atx_tid.patch b/package/kernel/mac80211/patches/305-ath9k-remove-the-sched-field-in-struct-ath_atx_tid.patch
new file mode 100644
index 0000000..ec860dc
--- /dev/null
+++ b/package/kernel/mac80211/patches/305-ath9k-remove-the-sched-field-in-struct-ath_atx_tid.patch
@@ -0,0 +1,90 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sat, 4 Apr 2015 18:42:33 +0200
+Subject: [PATCH] ath9k: remove the sched field in struct ath_atx_tid
+
+Use list_empty(&tid->list) instead
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -245,7 +245,6 @@ struct ath_atx_tid {
+ 	int baw_tail;   /* next unused tx buffer slot */
+ 
+ 	s8 bar_index;
+-	bool sched;
+ 	bool active;
+ 	bool clear_ps_filter;
+ };
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -113,12 +113,9 @@ static void ath_tx_queue_tid(struct ath_
+ 	if (!ctx)
+ 		return;
+ 
+-	if (tid->sched)
+-		return;
+-
+-	tid->sched = true;
+ 	list = &ctx->acq[TID_TO_WME_AC(tid->tidno)];
+-	list_add_tail(&tid->list, list);
++	if (list_empty(&tid->list))
++		list_add_tail(&tid->list, list);
+ }
+ 
+ static struct ath_frame_info *get_frame_info(struct sk_buff *skb)
+@@ -1556,15 +1553,14 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ 
+ 		ath_txq_lock(sc, txq);
+ 
+-		if (!tid->sched) {
++		if (list_empty(&tid->list)) {
+ 			ath_txq_unlock(sc, txq);
+ 			continue;
+ 		}
+ 
+ 		buffered = ath_tid_has_buffered(tid);
+ 
+-		tid->sched = false;
+-		list_del(&tid->list);
++		list_del_init(&tid->list);
+ 
+ 		ath_txq_unlock(sc, txq);
+ 
+@@ -1944,8 +1940,7 @@ void ath_txq_schedule(struct ath_softc *
+ 			break;
+ 
+ 		tid = list_first_entry(tid_list, struct ath_atx_tid, list);
+-		list_del(&tid->list);
+-		tid->sched = false;
++		list_del_init(&tid->list);
+ 
+ 		if (ath_tx_sched_aggr(sc, txq, tid, &stop))
+ 			sent = true;
+@@ -2863,11 +2858,11 @@ void ath_tx_node_init(struct ath_softc *
+ 		tid->seq_start = tid->seq_next = 0;
+ 		tid->baw_size  = WME_MAX_BA;
+ 		tid->baw_head  = tid->baw_tail = 0;
+-		tid->sched     = false;
+ 		tid->active	   = false;
+ 		tid->clear_ps_filter = true;
+ 		__skb_queue_head_init(&tid->buf_q);
+ 		__skb_queue_head_init(&tid->retry_q);
++		INIT_LIST_HEAD(&tid->list);
+ 		acno = TID_TO_WME_AC(tidno);
+ 		tid->txq = sc->tx.txq_map[acno];
+ 	}
+@@ -2886,10 +2881,8 @@ void ath_tx_node_cleanup(struct ath_soft
+ 
+ 		ath_txq_lock(sc, txq);
+ 
+-		if (tid->sched) {
+-			list_del(&tid->list);
+-			tid->sched = false;
+-		}
++		if (!list_empty(&tid->list))
++			list_del_init(&tid->list);
+ 
+ 		ath_tid_drain(sc, txq, tid);
+ 		tid->active = false;
diff --git a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch b/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch
deleted file mode 100644
index 85a1904..0000000
--- a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:11 +0300
-Subject: [PATCH] ath5k: fix reset race
-
-To prepare for reset ath5k should finish all asynchronous tasks. At
-first, it disables the interrupt generation, then it waits for the
-interrupt handler and tasklets completion, and then proceeds to the HW
-configuration update. But it does not consider that the interrupt
-handler or tasklet re-enables the interrupt generation. And we fall in a
-situation when ath5k assumes that interrupts are disabled, but it is
-not.
-
-This can lead to different consequences, such as reception of the frame,
-when we do not expect it. Under certain circumstances, this can lead to
-the following warning:
-
-  WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
-  invalid hw_rix: 1a
-  [..]
-  Call Trace:
-  [<802656a8>] show_stack+0x48/0x70
-  [<802dd92c>] warn_slowpath_common+0x88/0xbc
-  [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
-  [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
-  [<8028ac64>] tasklet_action+0x8c/0xf0
-  [<80075804>] __do_softirq+0x180/0x32c
-  [<80196ce8>] irq_exit+0x54/0x70
-  [<80041848>] ret_from_irq+0x0/0x4
-  [<80182fdc>] ioread32+0x4/0xc
-  [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
-  [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
-  [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
-  [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
-  [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
-  [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
-  [<8022c3f4>] process_one_work+0x28c/0x400
-  [<802df8f8>] worker_thread+0x258/0x3c0
-  [<801b5710>] kthread+0xe0/0xec
-  [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-Fix this issue by adding a new status flag, which forbids to re-enable
-the interrupt generation until the HW configuration is completed.
-
-Note: previous patch, which reorders the Rx disable code helps to avoid
-the above warning, but not fixes the root cause of unexpected frame
-receiving.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/ath5k.h
-+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1283,6 +1283,7 @@ struct ath5k_hw {
- #define ATH_STAT_PROMISC	1
- #define ATH_STAT_LEDSOFT	2		/* enable LED gpio status */
- #define ATH_STAT_STARTED	3		/* opened & irqs enabled */
-+#define ATH_STAT_RESET		4		/* hw reset */
- 
- 	unsigned int		filter_flags;	/* HW flags, AR5K_RX_FILTER_* */
- 	unsigned int		fif_filter_flags; /* Current FIF_* filter flags */
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -1523,6 +1523,9 @@ ath5k_set_current_imask(struct ath5k_hw
- 	enum ath5k_int imask;
- 	unsigned long flags;
- 
-+	if (test_bit(ATH_STAT_RESET, ah->status))
-+		return;
-+
- 	spin_lock_irqsave(&ah->irqlock, flags);
- 	imask = ah->imask;
- 	if (ah->rx_pending)
-@@ -2862,6 +2865,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 
- 	ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
- 
-+	__set_bit(ATH_STAT_RESET, ah->status);
-+
- 	ath5k_hw_set_imr(ah, 0);
- 	synchronize_irq(ah->irq);
- 	ath5k_stop_tasklets(ah);
-@@ -2952,6 +2957,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 	 */
- /*	ath5k_chan_change(ah, c); */
- 
-+	__clear_bit(ATH_STAT_RESET, ah->status);
-+
- 	ath5k_beacon_config(ah);
- 	/* intrs are enabled by ath5k_beacon_config */
- 
diff --git a/package/kernel/mac80211/patches/306-mac80211-Deinline-rate_control_rate_init-rate_contro.patch b/package/kernel/mac80211/patches/306-mac80211-Deinline-rate_control_rate_init-rate_contro.patch
new file mode 100644
index 0000000..928c93b
--- /dev/null
+++ b/package/kernel/mac80211/patches/306-mac80211-Deinline-rate_control_rate_init-rate_contro.patch
@@ -0,0 +1,161 @@
+From: Denys Vlasenko <dvlasenk@redhat.com>
+Date: Wed, 15 Jul 2015 14:56:06 +0200
+Subject: [PATCH] mac80211: Deinline rate_control_rate_init,
+ rate_control_rate_update
+
+With this .config: http://busybox.net/~vda/kernel_config,
+after deinlining these functions have sizes and callsite counts
+as follows:
+
+rate_control_rate_init: 554 bytes, 8 calls
+rate_control_rate_update: 1596 bytes, 5 calls
+
+Total size reduction: about 11 kbytes.
+
+Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
+CC: John Linville <linville@tuxdriver.com>
+CC: Michal Kazior <michal.kazior@tieto.com>
+CC: Johannes Berg <johannes.berg@intel.com>
+Cc: linux-wireless@vger.kernel.org
+Cc: netdev@vger.kernel.org
+CC: linux-kernel@vger.kernel.org
+---
+
+--- a/net/mac80211/rate.c
++++ b/net/mac80211/rate.c
+@@ -29,6 +29,65 @@ module_param(ieee80211_default_rc_algo,
+ MODULE_PARM_DESC(ieee80211_default_rc_algo,
+ 		 "Default rate control algorithm for mac80211 to use");
+ 
++void rate_control_rate_init(struct sta_info *sta)
++{
++	struct ieee80211_local *local = sta->sdata->local;
++	struct rate_control_ref *ref = sta->rate_ctrl;
++	struct ieee80211_sta *ista = &sta->sta;
++	void *priv_sta = sta->rate_ctrl_priv;
++	struct ieee80211_supported_band *sband;
++	struct ieee80211_chanctx_conf *chanctx_conf;
++
++	ieee80211_sta_set_rx_nss(sta);
++
++	if (!ref)
++		return;
++
++	rcu_read_lock();
++
++	chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf);
++	if (WARN_ON(!chanctx_conf)) {
++		rcu_read_unlock();
++		return;
++	}
++
++	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
++
++	spin_lock_bh(&sta->rate_ctrl_lock);
++	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
++			    priv_sta);
++	spin_unlock_bh(&sta->rate_ctrl_lock);
++	rcu_read_unlock();
++	set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
++}
++
++void rate_control_rate_update(struct ieee80211_local *local,
++				    struct ieee80211_supported_band *sband,
++				    struct sta_info *sta, u32 changed)
++{
++	struct rate_control_ref *ref = local->rate_ctrl;
++	struct ieee80211_sta *ista = &sta->sta;
++	void *priv_sta = sta->rate_ctrl_priv;
++	struct ieee80211_chanctx_conf *chanctx_conf;
++
++	if (ref && ref->ops->rate_update) {
++		rcu_read_lock();
++
++		chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf);
++		if (WARN_ON(!chanctx_conf)) {
++			rcu_read_unlock();
++			return;
++		}
++
++		spin_lock_bh(&sta->rate_ctrl_lock);
++		ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
++				      ista, priv_sta, changed);
++		spin_unlock_bh(&sta->rate_ctrl_lock);
++		rcu_read_unlock();
++	}
++	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
++}
++
+ int ieee80211_rate_control_register(const struct rate_control_ops *ops)
+ {
+ 	struct rate_control_alg *alg;
+--- a/net/mac80211/rate.h
++++ b/net/mac80211/rate.h
+@@ -71,64 +71,10 @@ rate_control_tx_status_noskb(struct ieee
+ 	spin_unlock_bh(&sta->rate_ctrl_lock);
+ }
+ 
+-static inline void rate_control_rate_init(struct sta_info *sta)
+-{
+-	struct ieee80211_local *local = sta->sdata->local;
+-	struct rate_control_ref *ref = sta->rate_ctrl;
+-	struct ieee80211_sta *ista = &sta->sta;
+-	void *priv_sta = sta->rate_ctrl_priv;
+-	struct ieee80211_supported_band *sband;
+-	struct ieee80211_chanctx_conf *chanctx_conf;
+-
+-	ieee80211_sta_set_rx_nss(sta);
+-
+-	if (!ref)
+-		return;
+-
+-	rcu_read_lock();
+-
+-	chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf);
+-	if (WARN_ON(!chanctx_conf)) {
+-		rcu_read_unlock();
+-		return;
+-	}
+-
+-	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
+-
+-	spin_lock_bh(&sta->rate_ctrl_lock);
+-	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
+-			    priv_sta);
+-	spin_unlock_bh(&sta->rate_ctrl_lock);
+-	rcu_read_unlock();
+-	set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
+-}
+-
+-static inline void rate_control_rate_update(struct ieee80211_local *local,
++void rate_control_rate_init(struct sta_info *sta);
++void rate_control_rate_update(struct ieee80211_local *local,
+ 				    struct ieee80211_supported_band *sband,
+-				    struct sta_info *sta, u32 changed)
+-{
+-	struct rate_control_ref *ref = local->rate_ctrl;
+-	struct ieee80211_sta *ista = &sta->sta;
+-	void *priv_sta = sta->rate_ctrl_priv;
+-	struct ieee80211_chanctx_conf *chanctx_conf;
+-
+-	if (ref && ref->ops->rate_update) {
+-		rcu_read_lock();
+-
+-		chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf);
+-		if (WARN_ON(!chanctx_conf)) {
+-			rcu_read_unlock();
+-			return;
+-		}
+-
+-		spin_lock_bh(&sta->rate_ctrl_lock);
+-		ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
+-				      ista, priv_sta, changed);
+-		spin_unlock_bh(&sta->rate_ctrl_lock);
+-		rcu_read_unlock();
+-	}
+-	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
+-}
++				    struct sta_info *sta, u32 changed);
+ 
+ static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
+ 					   struct sta_info *sta, gfp_t gfp)
diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch b/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch
deleted file mode 100644
index ab9771e..0000000
--- a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 12 Mar 2015 17:10:50 +0100
-Subject: [PATCH] ath9k: fix tracking of enabled AP beacons
-
-sc->nbcnvifs tracks assigned beacon slots, not enabled beacons.
-Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool)
-should be updated, or if beacons have been enabled already.
-With the current code (depending on the order of calls), beacons often
-do not get enabled in an AP+STA setup.
-To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a
-bitmask of enabled beacon slots.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -219,12 +219,15 @@ void ath9k_beacon_remove_slot(struct ath
- 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- 	struct ath_vif *avp = (void *)vif->drv_priv;
- 	struct ath_buf *bf = avp->av_bcbuf;
-+	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
- 
- 	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
- 		avp->av_bslot);
- 
- 	tasklet_disable(&sc->bcon_tasklet);
- 
-+	cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+
- 	if (bf && bf->bf_mpdu) {
- 		struct sk_buff *skb = bf->bf_mpdu;
- 		dma_unmap_single(sc->dev, bf->bf_buf_addr,
-@@ -521,8 +524,7 @@ static bool ath9k_allow_beacon_config(st
- 	}
- 
- 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
--		if ((vif->type != NL80211_IFTYPE_AP) ||
--		    (sc->nbcnvifs > 1)) {
-+		if (vif->type != NL80211_IFTYPE_AP) {
- 			ath_dbg(common, CONFIG,
- 				"An AP interface is already present !\n");
- 			return false;
-@@ -616,12 +618,14 @@ void ath9k_beacon_config(struct ath_soft
- 	 * enabling/disabling SWBA.
- 	 */
- 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
--		if (!bss_conf->enable_beacon &&
--		    (sc->nbcnvifs <= 1)) {
--			cur_conf->enable_beacon = false;
--		} else if (bss_conf->enable_beacon) {
--			cur_conf->enable_beacon = true;
--			ath9k_cache_beacon_config(sc, ctx, bss_conf);
-+		bool enabled = cur_conf->enable_beacon;
-+
-+		if (!bss_conf->enable_beacon) {
-+			cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+		} else {
-+			cur_conf->enable_beacon |= BIT(avp->av_bslot);
-+			if (!enabled)
-+				ath9k_cache_beacon_config(sc, ctx, bss_conf);
- 		}
- 	}
- 
---- a/drivers/net/wireless/ath/ath9k/common.h
-+++ b/drivers/net/wireless/ath/ath9k/common.h
-@@ -54,7 +54,7 @@ struct ath_beacon_config {
- 	u16 dtim_period;
- 	u16 bmiss_timeout;
- 	u8 dtim_count;
--	bool enable_beacon;
-+	u8 enable_beacon;
- 	bool ibss_creator;
- 	u32 nexttbtt;
- 	u32 intval;
diff --git a/package/kernel/mac80211/patches/307-mac80211-Deinline-drv_sta_state.patch b/package/kernel/mac80211/patches/307-mac80211-Deinline-drv_sta_state.patch
new file mode 100644
index 0000000..474c409
--- /dev/null
+++ b/package/kernel/mac80211/patches/307-mac80211-Deinline-drv_sta_state.patch
@@ -0,0 +1,116 @@
+From: Denys Vlasenko <dvlasenk@redhat.com>
+Date: Wed, 15 Jul 2015 14:56:05 +0200
+Subject: [PATCH] mac80211: Deinline drv_sta_state
+
+With this .config: http://busybox.net/~vda/kernel_config,
+after deinlining the function size is 3132 bytes and there are
+7 callsites.
+
+Total size reduction: about 20 kbytes.
+
+Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
+CC: John Linville <linville@tuxdriver.com>
+CC: Michal Kazior <michal.kazior@tieto.com>
+Cc: Johannes Berg <johannes.berg@intel.com>
+Cc: linux-wireless@vger.kernel.org
+Cc: netdev@vger.kernel.org
+CC: linux-kernel@vger.kernel.org
+---
+ create mode 100644 net/mac80211/driver-ops.c
+
+--- a/net/mac80211/Makefile
++++ b/net/mac80211/Makefile
+@@ -3,6 +3,7 @@ obj-$(CPTCFG_MAC80211) += mac80211.o
+ # mac80211 objects
+ mac80211-y := \
+ 	main.o status.o \
++	driver-ops.o \
+ 	sta_info.o \
+ 	wep.o \
+ 	wpa.o \
+--- /dev/null
++++ b/net/mac80211/driver-ops.c
+@@ -0,0 +1,41 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <net/mac80211.h>
++#include "ieee80211_i.h"
++#include "trace.h"
++#include "driver-ops.h"
++
++__must_check
++int drv_sta_state(struct ieee80211_local *local,
++		  struct ieee80211_sub_if_data *sdata,
++		  struct sta_info *sta,
++		  enum ieee80211_sta_state old_state,
++		  enum ieee80211_sta_state new_state)
++{
++	int ret = 0;
++
++	might_sleep();
++
++	sdata = get_bss_sdata(sdata);
++	if (!check_sdata_in_driver(sdata))
++		return -EIO;
++
++	trace_drv_sta_state(local, sdata, &sta->sta, old_state, new_state);
++	if (local->ops->sta_state) {
++		ret = local->ops->sta_state(&local->hw, &sdata->vif, &sta->sta,
++					    old_state, new_state);
++	} else if (old_state == IEEE80211_STA_AUTH &&
++		   new_state == IEEE80211_STA_ASSOC) {
++		ret = drv_sta_add(local, sdata, &sta->sta);
++		if (ret == 0)
++			sta->uploaded = true;
++	} else if (old_state == IEEE80211_STA_ASSOC &&
++		   new_state == IEEE80211_STA_AUTH) {
++		drv_sta_remove(local, sdata, &sta->sta);
++	}
++	trace_drv_return_int(local, ret);
++	return ret;
++}
+--- a/net/mac80211/driver-ops.h
++++ b/net/mac80211/driver-ops.h
+@@ -573,37 +573,12 @@ static inline void drv_sta_pre_rcu_remov
+ 	trace_drv_return_void(local);
+ }
+ 
+-static inline __must_check
++__must_check
+ int drv_sta_state(struct ieee80211_local *local,
+ 		  struct ieee80211_sub_if_data *sdata,
+ 		  struct sta_info *sta,
+ 		  enum ieee80211_sta_state old_state,
+-		  enum ieee80211_sta_state new_state)
+-{
+-	int ret = 0;
+-
+-	might_sleep();
+-
+-	sdata = get_bss_sdata(sdata);
+-	if (!check_sdata_in_driver(sdata))
+-		return -EIO;
+-
+-	trace_drv_sta_state(local, sdata, &sta->sta, old_state, new_state);
+-	if (local->ops->sta_state) {
+-		ret = local->ops->sta_state(&local->hw, &sdata->vif, &sta->sta,
+-					    old_state, new_state);
+-	} else if (old_state == IEEE80211_STA_AUTH &&
+-		   new_state == IEEE80211_STA_ASSOC) {
+-		ret = drv_sta_add(local, sdata, &sta->sta);
+-		if (ret == 0)
+-			sta->uploaded = true;
+-	} else if (old_state == IEEE80211_STA_ASSOC &&
+-		   new_state == IEEE80211_STA_AUTH) {
+-		drv_sta_remove(local, sdata, &sta->sta);
+-	}
+-	trace_drv_return_int(local, ret);
+-	return ret;
+-}
++		  enum ieee80211_sta_state new_state);
+ 
+ static inline void drv_sta_rc_update(struct ieee80211_local *local,
+ 				     struct ieee80211_sub_if_data *sdata,
diff --git a/package/kernel/mac80211/patches/308-ath9k-Fix-NF-CCA-limits-for-AR9287-and-AR9227.patch b/package/kernel/mac80211/patches/308-ath9k-Fix-NF-CCA-limits-for-AR9287-and-AR9227.patch
new file mode 100644
index 0000000..1a3a9d4
--- /dev/null
+++ b/package/kernel/mac80211/patches/308-ath9k-Fix-NF-CCA-limits-for-AR9287-and-AR9227.patch
@@ -0,0 +1,30 @@
+From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Date: Wed, 22 Jul 2015 10:42:43 +0200
+Subject: [PATCH] ath9k: Fix NF CCA limits for AR9287 and AR9227
+
+The FreeBSD driver [0] uses the same 2G values as for the AR9280 chips.
+Using the same values in ath9k results in much better throughput for me.
+
+Before this patch I had a huge amount of packet loss (sometimes up to
+40%) and the max transfer speed was somewhere around 5Mbit/s. With this
+patch applied I have zero packet loss and ten times the throughput.
+My device uses a AR9227 which is the PCI variant of the AR9287.
+
+[0] http://bxr.su/FreeBSD/sys/dev/ath/ath_hal/ar9002/ar9287.h
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h
++++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
+@@ -610,8 +610,8 @@
+ #define AR_PHY_CCA_MIN_GOOD_VAL_9271_2GHZ      -127
+ #define AR_PHY_CCA_MAX_GOOD_VAL_9271_2GHZ      -116
+ 
+-#define AR_PHY_CCA_NOM_VAL_9287_2GHZ           -120
++#define AR_PHY_CCA_NOM_VAL_9287_2GHZ           -112
+ #define AR_PHY_CCA_MIN_GOOD_VAL_9287_2GHZ    -127
+-#define AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ    -110
++#define AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ    -97
+ 
+ #endif
diff --git a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch b/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch
deleted file mode 100644
index d132636..0000000
--- a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Fri, 13 Mar 2015 10:49:40 +0100
-Subject: [PATCH] mac80211: minstrel_ht: fix rounding issue in MCS duration
- calculation
-
-On very high MCS bitrates, the calculated duration of rates that are
-next to each other can be very imprecise, due to the small packet size
-used as reference (1200 bytes).
-This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the
-same throughput when the probability is also the same. This leads to a
-bad rate selection for such rates.
-
-Fix this issue by introducing an average A-MPDU size factor into the
-calculation.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -17,10 +17,11 @@
- #include "rc80211_minstrel.h"
- #include "rc80211_minstrel_ht.h"
- 
-+#define AVG_AMPDU_SIZE	16
- #define AVG_PKT_SIZE	1200
- 
- /* Number of bits for an average sized packet */
--#define MCS_NBITS (AVG_PKT_SIZE << 3)
-+#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3)
- 
- /* Number of symbols for a packet with (bps) bits per symbol */
- #define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps))
-@@ -33,7 +34,8 @@
- 	)
- 
- /* Transmit duration for the raw data part of an average sized packet */
--#define MCS_DURATION(streams, sgi, bps) MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps)))
-+#define MCS_DURATION(streams, sgi, bps) \
-+	(MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE)
- 
- #define BW_20			0
- #define BW_40			1
diff --git a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch b/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch
deleted file mode 100644
index 945fbce..0000000
--- a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 15 Mar 2015 08:02:37 +0100
-Subject: [PATCH] ath9k: disable TPC support again (for now)
-
-TPC support has been observed to cause some tx power fluctuations on
-some devices with at least AR934x and AR938x chips.
-Disable it for now until the bugs have been found and fixed
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -424,7 +424,7 @@ static void ath9k_hw_init_defaults(struc
- 	ah->power_mode = ATH9K_PM_UNDEFINED;
- 	ah->htc_reset_init = true;
- 
--	ah->tpc_enabled = true;
-+	ah->tpc_enabled = false;
- 
- 	ah->ani_function = ATH9K_ANI_ALL;
- 	if (!AR_SREV_9300_20_OR_LATER(ah))
diff --git a/package/kernel/mac80211/patches/309-mac80211-make-local-tx_headroom-a-multiple-of-4.patch b/package/kernel/mac80211/patches/309-mac80211-make-local-tx_headroom-a-multiple-of-4.patch
new file mode 100644
index 0000000..e8e9617
--- /dev/null
+++ b/package/kernel/mac80211/patches/309-mac80211-make-local-tx_headroom-a-multiple-of-4.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 30 Jul 2015 14:12:25 +0200
+Subject: [PATCH] mac80211: make local->tx_headroom a multiple of 4
+
+This ensures that mac80211 generated management frames and beacons are
+aligned before being passed to the driver
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/main.c
++++ b/net/mac80211/main.c
+@@ -1031,6 +1031,7 @@ int ieee80211_register_hw(struct ieee802
+ 	 */
+ 	local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
+ 				   IEEE80211_TX_STATUS_HEADROOM);
++	local->tx_headroom = ALIGN(local->tx_headroom, 4);
+ 
+ 	debugfs_hw_add(local);
+ 
diff --git a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch b/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch
deleted file mode 100644
index bd3050e..0000000
--- a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 24 Feb 2015 00:28:18 +0100
-Subject: [PATCH] mac80211: don't look up stations for multicast addresses
-
-Since multicast addresses don't exist as stations, don't attempt
-to look them up in the hashtable on TX.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1161,7 +1161,7 @@ ieee80211_tx_prepare(struct ieee80211_su
- 		   tx->sdata->control_port_protocol == tx->skb->protocol) {
- 		tx->sta = sta_info_get_bss(sdata, hdr->addr1);
- 	}
--	if (!tx->sta)
-+	if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
- 		tx->sta = sta_info_get(sdata, hdr->addr1);
- 
- 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
diff --git a/package/kernel/mac80211/patches/310-mac80211-fix-invalid-read-in-minstrel_sort_best_tp_r.patch b/package/kernel/mac80211/patches/310-mac80211-fix-invalid-read-in-minstrel_sort_best_tp_r.patch
new file mode 100644
index 0000000..51a315c
--- /dev/null
+++ b/package/kernel/mac80211/patches/310-mac80211-fix-invalid-read-in-minstrel_sort_best_tp_r.patch
@@ -0,0 +1,34 @@
+From: Adrien Schildknecht <adrien+dev@schischi.me>
+Date: Tue, 28 Jul 2015 10:30:16 +0200
+Subject: [PATCH] mac80211: fix invalid read in minstrel_sort_best_tp_rates()
+
+At the last iteration of the loop, j may equal zero and thus
+tp_list[j - 1] causes an invalid read.
+Changed the logic of the loop so that j - 1 is always >= 0.
+
+Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
+---
+
+--- a/net/mac80211/rc80211_minstrel.c
++++ b/net/mac80211/rc80211_minstrel.c
+@@ -92,14 +92,15 @@ int minstrel_get_tp_avg(struct minstrel_
+ static inline void
+ minstrel_sort_best_tp_rates(struct minstrel_sta_info *mi, int i, u8 *tp_list)
+ {
+-	int j = MAX_THR_RATES;
+-	struct minstrel_rate_stats *tmp_mrs = &mi->r[j - 1].stats;
++	int j;
++	struct minstrel_rate_stats *tmp_mrs;
+ 	struct minstrel_rate_stats *cur_mrs = &mi->r[i].stats;
+ 
+-	while (j > 0 && (minstrel_get_tp_avg(&mi->r[i], cur_mrs->prob_ewma) >
+-	       minstrel_get_tp_avg(&mi->r[tp_list[j - 1]], tmp_mrs->prob_ewma))) {
+-		j--;
++	for (j = MAX_THR_RATES; j > 0; --j) {
+ 		tmp_mrs = &mi->r[tp_list[j - 1]].stats;
++		if (minstrel_get_tp_avg(&mi->r[i], cur_mrs->prob_ewma) <=
++		    minstrel_get_tp_avg(&mi->r[tp_list[j - 1]], tmp_mrs->prob_ewma))
++			break;
+ 	}
+ 
+ 	if (j < MAX_THR_RATES - 1)
diff --git a/package/kernel/mac80211/patches/311-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch b/package/kernel/mac80211/patches/311-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
new file mode 100644
index 0000000..e44f121
--- /dev/null
+++ b/package/kernel/mac80211/patches/311-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
@@ -0,0 +1,45 @@
+From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
+Date: Thu, 9 Jul 2015 13:43:18 +0530
+Subject: [PATCH] brcmfmac: dhd_sdio.c: use existing atomic_or primitive
+
+There's already a generic implementation so use that instead.
+
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+@@ -2564,15 +2564,6 @@ static inline void brcmf_sdio_clrintr(st
+ 	}
+ }
+ 
+-static void atomic_orr(int val, atomic_t *v)
+-{
+-	int old_val;
+-
+-	old_val = atomic_read(v);
+-	while (atomic_cmpxchg(v, old_val, val | old_val) != old_val)
+-		old_val = atomic_read(v);
+-}
+-
+ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
+ {
+ 	struct brcmf_core *buscore;
+@@ -2595,7 +2586,7 @@ static int brcmf_sdio_intr_rstatus(struc
+ 	if (val) {
+ 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
+ 		bus->sdcnt.f1regdata++;
+-		atomic_orr(val, &bus->intstatus);
++		atomic_or(val, &bus->intstatus);
+ 	}
+ 
+ 	return ret;
+@@ -2712,7 +2703,7 @@ static void brcmf_sdio_dpc(struct brcmf_
+ 
+ 	/* Keep still-pending events for next scheduling */
+ 	if (intstatus)
+-		atomic_orr(intstatus, &bus->intstatus);
++		atomic_or(intstatus, &bus->intstatus);
+ 
+ 	brcmf_sdio_clrintr(bus);
+ 
diff --git a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch b/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch
deleted file mode 100644
index b2475b9..0000000
--- a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 11:41:58 +0100
-Subject: [PATCH] mac80211: remove drop_unencrypted code
-
-This mechanism was historic, and only ever used by IBSS, which
-also doesn't need to have it as it properly manages station's
-802.1X PAE state (or, with WEP, always has a key.)
-
-Remove the mechanism to clean up the code.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -274,8 +274,6 @@ void debugfs_hw_add(struct ieee80211_loc
- #ifdef CPTCFG_MAC80211_DEBUG_COUNTERS
- 	DEBUGFS_STATS_ADD(tx_handlers_drop, local->tx_handlers_drop);
- 	DEBUGFS_STATS_ADD(tx_handlers_queued, local->tx_handlers_queued);
--	DEBUGFS_STATS_ADD(tx_handlers_drop_unencrypted,
--		local->tx_handlers_drop_unencrypted);
- 	DEBUGFS_STATS_ADD(tx_handlers_drop_fragment,
- 		local->tx_handlers_drop_fragment);
- 	DEBUGFS_STATS_ADD(tx_handlers_drop_wep,
---- a/net/mac80211/debugfs_netdev.c
-+++ b/net/mac80211/debugfs_netdev.c
-@@ -177,7 +177,6 @@ static ssize_t ieee80211_if_write_##name
- 	IEEE80211_IF_FILE_R(name)
- 
- /* common attributes */
--IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
- IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
- 		  HEX);
- IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
-@@ -562,7 +561,6 @@ IEEE80211_IF_FILE(dot11MeshAwakeWindowDu
- 
- static void add_common_files(struct ieee80211_sub_if_data *sdata)
- {
--	DEBUGFS_ADD(drop_unencrypted);
- 	DEBUGFS_ADD(rc_rateidx_mask_2ghz);
- 	DEBUGFS_ADD(rc_rateidx_mask_5ghz);
- 	DEBUGFS_ADD(rc_rateidx_mcs_mask_2ghz);
---- a/net/mac80211/ibss.c
-+++ b/net/mac80211/ibss.c
-@@ -249,8 +249,6 @@ static void __ieee80211_sta_join_ibss(st
- 	if (presp)
- 		kfree_rcu(presp, rcu_head);
- 
--	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
--
- 	/* make a copy of the chandef, it could be modified below. */
- 	chandef = *req_chandef;
- 	chan = chandef.chan;
-@@ -1289,8 +1287,6 @@ static void ieee80211_sta_create_ibss(st
- 
- 	if (ifibss->privacy)
- 		capability |= WLAN_CAPABILITY_PRIVACY;
--	else
--		sdata->drop_unencrypted = 0;
- 
- 	__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
- 				  &ifibss->chandef, ifibss->basic_rates,
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -842,8 +842,6 @@ struct ieee80211_sub_if_data {
- 
- 	unsigned long state;
- 
--	int drop_unencrypted;
--
- 	char name[IFNAMSIZ];
- 
- 	/* Fragment table for host-based reassembly */
-@@ -1289,7 +1287,6 @@ struct ieee80211_local {
- 	/* TX/RX handler statistics */
- 	unsigned int tx_handlers_drop;
- 	unsigned int tx_handlers_queued;
--	unsigned int tx_handlers_drop_unencrypted;
- 	unsigned int tx_handlers_drop_fragment;
- 	unsigned int tx_handlers_drop_wep;
- 	unsigned int tx_handlers_drop_not_assoc;
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1535,7 +1535,6 @@ int ieee80211_if_change_type(struct ieee
- 	}
- 
- 	/* reset some values that shouldn't be kept across type changes */
--	sdata->drop_unencrypted = 0;
- 	if (type == NL80211_IFTYPE_STATION)
- 		sdata->u.mgd.use_4addr = false;
- 
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1897,8 +1897,7 @@ static int ieee80211_drop_unencrypted(st
- 	/* Drop unencrypted frames if key is set. */
- 	if (unlikely(!ieee80211_has_protected(fc) &&
- 		     !ieee80211_is_nullfunc(fc) &&
--		     ieee80211_is_data(fc) &&
--		     (rx->key || rx->sdata->drop_unencrypted)))
-+		     ieee80211_is_data(fc) && rx->key))
- 		return -EACCES;
- 
- 	return 0;
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -594,23 +594,8 @@ ieee80211_tx_h_select_key(struct ieee802
- 	else if (!is_multicast_ether_addr(hdr->addr1) &&
- 		 (key = rcu_dereference(tx->sdata->default_unicast_key)))
- 		tx->key = key;
--	else if (info->flags & IEEE80211_TX_CTL_INJECTED)
-+	else
- 		tx->key = NULL;
--	else if (!tx->sdata->drop_unencrypted)
--		tx->key = NULL;
--	else if (tx->skb->protocol == tx->sdata->control_port_protocol)
--		tx->key = NULL;
--	else if (ieee80211_is_robust_mgmt_frame(tx->skb) &&
--		 !(ieee80211_is_action(hdr->frame_control) &&
--		   tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP)))
--		tx->key = NULL;
--	else if (ieee80211_is_mgmt(hdr->frame_control) &&
--		 !ieee80211_is_robust_mgmt_frame(tx->skb))
--		tx->key = NULL;
--	else {
--		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
--		return TX_DROP;
--	}
- 
- 	if (tx->key) {
- 		bool skip_hw = false;
diff --git a/package/kernel/mac80211/patches/312-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch b/package/kernel/mac80211/patches/312-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
new file mode 100644
index 0000000..bb27115
--- /dev/null
+++ b/package/kernel/mac80211/patches/312-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
@@ -0,0 +1,46 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Thu, 20 Aug 2015 00:16:42 +0200
+Subject: [PATCH] brcmfmac: check all combinations when setting wiphy's
+ addresses
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom is working on better reflection of interface combinations. With
+upcoming patches we may have 1st combination supporting less interfaces
+than others.
+To don't run out of addresses check all combinations to find the one
+with the greatest max_interfaces value.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -5786,7 +5786,9 @@ static void brcmf_wiphy_wowl_params(stru
+ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
+ {
+ 	struct brcmf_pub *drvr = ifp->drvr;
++	const struct ieee80211_iface_combination *combo;
+ 	struct ieee80211_supported_band *band;
++	u16 max_interfaces = 0;
+ 	__le32 bandlist[3];
+ 	u32 n_bands;
+ 	int err, i;
+@@ -5799,8 +5801,13 @@ static int brcmf_setup_wiphy(struct wiph
+ 	if (err)
+ 		return err;
+ 
+-	for (i = 0; i < wiphy->iface_combinations->max_interfaces &&
+-	     i < ARRAY_SIZE(drvr->addresses); i++) {
++	for (i = 0, combo = wiphy->iface_combinations;
++	     i < wiphy->n_iface_combinations; i++, combo++) {
++		max_interfaces = max(max_interfaces, combo->max_interfaces);
++	}
++
++	for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses);
++	     i++) {
+ 		u8 *addr = drvr->addresses[i].addr;
+ 
+ 		memcpy(addr, drvr->mac, ETH_ALEN);
diff --git a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch b/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch
deleted file mode 100644
index 02a7fab..0000000
--- a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:21 +0100
-Subject: [PATCH] mac80211: don't look up destination station twice
-
-There's no need to look up the destination station twice while
-building the 802.11 header for a given frame if the frame will
-actually be transmitted to the station we initially looked up.
-
-This happens for 4-addr VLAN interfaces and TDLS connections, which
-both directly send the frame to the station they looked up, though
-in the case of TDLS some station conditions need to be checked.
-
-To avoid that, add a variable indicating that we've looked up the
-station that the frame is going to be transmitted to, and avoid the
-lookup/flag checking if it already has been done.
-
-In the TDLS case, also move the authorized/wme_sta flag assignment
-to the correct place, i.e. only when that station is really used.
-Before this change, the new lookup should always have succeeded so
-that the potentially erroneous data would be overwritten.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1894,6 +1894,7 @@ static struct sk_buff *ieee80211_build_h
- 	bool wme_sta = false, authorized = false, tdls_auth = false;
- 	bool tdls_peer = false, tdls_setup_frame = false;
- 	bool multicast;
-+	bool have_station = false;
- 	u16 info_id = 0;
- 	struct ieee80211_chanctx_conf *chanctx_conf;
- 	struct ieee80211_sub_if_data *ap_sdata;
-@@ -1918,6 +1919,7 @@ static struct sk_buff *ieee80211_build_h
- 			hdrlen = 30;
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
-+			have_station = true;
- 		}
- 		ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- 					u.ap);
-@@ -2034,9 +2036,6 @@ static struct sk_buff *ieee80211_build_h
- 		if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) {
- 			sta = sta_info_get(sdata, skb->data);
- 			if (sta) {
--				authorized = test_sta_flag(sta,
--							WLAN_STA_AUTHORIZED);
--				wme_sta = sta->sta.wme;
- 				tdls_peer = test_sta_flag(sta,
- 							  WLAN_STA_TDLS_PEER);
- 				tdls_auth = test_sta_flag(sta,
-@@ -2068,6 +2067,9 @@ static struct sk_buff *ieee80211_build_h
- 			memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
- 			memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN);
- 			hdrlen = 24;
-+			have_station = true;
-+			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
-+			wme_sta = sta->sta.wme;
- 		}  else if (sdata->u.mgd.use_4addr &&
- 			    cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2130,7 +2132,7 @@ static struct sk_buff *ieee80211_build_h
- 	 * in AP mode)
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast) {
-+	if (!multicast && !have_station) {
- 		sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
diff --git a/package/kernel/mac80211/patches/313-brcmfmac-correct-interface-combination-info.patch b/package/kernel/mac80211/patches/313-brcmfmac-correct-interface-combination-info.patch
new file mode 100644
index 0000000..baee295
--- /dev/null
+++ b/package/kernel/mac80211/patches/313-brcmfmac-correct-interface-combination-info.patch
@@ -0,0 +1,204 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Thu, 20 Aug 2015 22:06:03 +0200
+Subject: [PATCH] brcmfmac: correct interface combination info
+
+The interface combination provided by brcmfmac did not truly reflect
+the combinations supported by driver and/or firmware.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -5695,63 +5695,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
+ 	}
+ };
+ 
++/**
++ * brcmf_setup_ifmodes() - determine interface modes and combinations.
++ *
++ * @wiphy: wiphy object.
++ * @ifp: interface object needed for feat module api.
++ *
++ * The interface modes and combinations are determined dynamically here
++ * based on firmware functionality.
++ *
++ * no p2p and no mbss:
++ *
++ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
++ *
++ * no p2p and mbss:
++ *
++ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
++ *	#AP <= 4, matching BI, channels = 1, 4 total
++ *
++ * p2p, no mchan, and mbss:
++ *
++ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
++ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
++ *	#AP <= 4, matching BI, channels = 1, 4 total
++ *
++ * p2p, mchan, and mbss:
++ *
++ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
++ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
++ *	#AP <= 4, matching BI, channels = 1, 4 total
++ */
+ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
+ {
+ 	struct ieee80211_iface_combination *combo = NULL;
+-	struct ieee80211_iface_limit *limits = NULL;
+-	int i = 0, max_iface_cnt;
++	struct ieee80211_iface_limit *c0_limits = NULL;
++	struct ieee80211_iface_limit *p2p_limits = NULL;
++	struct ieee80211_iface_limit *mbss_limits = NULL;
++	bool mbss, p2p;
++	int i, c, n_combos;
+ 
+-	combo = kzalloc(sizeof(*combo), GFP_KERNEL);
++	mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
++	p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
++
++	n_combos = 1 + !!p2p + !!mbss;
++	combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
+ 	if (!combo)
+ 		goto err;
+ 
+-	limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
+-	if (!limits)
++	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
++	if (!c0_limits)
+ 		goto err;
+ 
++	if (p2p) {
++		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
++		if (!p2p_limits)
++			goto err;
++	}
++
++	if (mbss) {
++		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
++		if (!mbss_limits)
++			goto err;
++	}
++
+ 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ 				 BIT(NL80211_IFTYPE_ADHOC) |
+ 				 BIT(NL80211_IFTYPE_AP);
+ 
+-	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
+-		combo->num_different_channels = 2;
+-	else
+-		combo->num_different_channels = 1;
+-
+-	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
+-		limits[i].max = 1;
+-		limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+-		limits[i].max = 4;
+-		limits[i++].types = BIT(NL80211_IFTYPE_AP);
+-		max_iface_cnt = 5;
+-	} else {
+-		limits[i].max = 2;
+-		limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
+-				    BIT(NL80211_IFTYPE_AP);
+-		max_iface_cnt = 2;
+-	}
+-
+-	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
++	c = 0;
++	i = 0;
++	combo[c].num_different_channels = 1;
++	c0_limits[i].max = 1;
++	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
++	if (p2p) {
++		if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
++			combo[c].num_different_channels = 2;
+ 		wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ 					  BIT(NL80211_IFTYPE_P2P_GO) |
+ 					  BIT(NL80211_IFTYPE_P2P_DEVICE);
+-		limits[i].max = 1;
+-		limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+-				    BIT(NL80211_IFTYPE_P2P_GO);
+-		limits[i].max = 1;
+-		limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+-		max_iface_cnt += 2;
+-	}
+-	combo->max_interfaces = max_iface_cnt;
+-	combo->limits = limits;
+-	combo->n_limits = i;
++		c0_limits[i].max = 1;
++		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
++		c0_limits[i].max = 1;
++		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
++				       BIT(NL80211_IFTYPE_P2P_GO);
++	} else {
++		c0_limits[i].max = 1;
++		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
++	}
++	combo[c].max_interfaces = i;
++	combo[c].n_limits = i;
++	combo[c].limits = c0_limits;
++
++	if (p2p) {
++		c++;
++		i = 0;
++		combo[c].num_different_channels = 1;
++		p2p_limits[i].max = 1;
++		p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
++		p2p_limits[i].max = 1;
++		p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
++		p2p_limits[i].max = 1;
++		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
++		p2p_limits[i].max = 1;
++		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
++		combo[c].max_interfaces = i;
++		combo[c].n_limits = i;
++		combo[c].limits = p2p_limits;
++	}
+ 
++	if (mbss) {
++		c++;
++		combo[c].beacon_int_infra_match = true;
++		combo[c].num_different_channels = 1;
++		mbss_limits[0].max = 4;
++		mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
++		combo[c].max_interfaces = 4;
++		combo[c].n_limits = 1;
++		combo[c].limits = mbss_limits;
++	}
++	wiphy->n_iface_combinations = n_combos;
+ 	wiphy->iface_combinations = combo;
+-	wiphy->n_iface_combinations = 1;
+ 	return 0;
+ 
+ err:
+-	kfree(limits);
++	kfree(c0_limits);
++	kfree(p2p_limits);
++	kfree(mbss_limits);
+ 	kfree(combo);
+ 	return -ENOMEM;
+ }
+@@ -6080,11 +6149,15 @@ static void brcmf_cfg80211_reg_notifier(
+ 
+ static void brcmf_free_wiphy(struct wiphy *wiphy)
+ {
++	int i;
++
+ 	if (!wiphy)
+ 		return;
+ 
+-	if (wiphy->iface_combinations)
+-		kfree(wiphy->iface_combinations->limits);
++	if (wiphy->iface_combinations) {
++		for (i = 0; i < wiphy->n_iface_combinations; i++)
++			kfree(wiphy->iface_combinations[i].limits);
++	}
+ 	kfree(wiphy->iface_combinations);
+ 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
+ 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch b/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch
deleted file mode 100644
index 4125351..0000000
--- a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:22 +0100
-Subject: [PATCH] mac80211: drop 4-addr VLAN frames earlier if not
- connected
-
-If there's no station on the 4-addr VLAN interface, then frames
-cannot be transmitted. Drop such frames earlier, before setting
-up all the information for them.
-
-We should keep the old check though since that code might be used
-for other internally-generated frames.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1920,6 +1920,9 @@ static struct sk_buff *ieee80211_build_h
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 			have_station = true;
-+		} else if (sdata->wdev.use_4addr) {
-+			ret = -ENOLINK;
-+			goto free;
- 		}
- 		ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- 					u.ap);
diff --git a/package/kernel/mac80211/patches/314-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch b/package/kernel/mac80211/patches/314-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
new file mode 100644
index 0000000..9768ef2
--- /dev/null
+++ b/package/kernel/mac80211/patches/314-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
@@ -0,0 +1,87 @@
+From: Franky Lin <frankyl@broadcom.com>
+Date: Thu, 20 Aug 2015 22:06:04 +0200
+Subject: [PATCH] brcmfmac: add debugfs entry for msgbuf statistics
+
+Expose ring buffer read/write pointers and other useful statistics
+through debugfs.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Franky Lin <frankyl@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+@@ -1360,6 +1360,60 @@ void brcmf_msgbuf_delete_flowring(struct
+ 	}
+ }
+ 
++#ifdef DEBUG
++static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
++{
++	struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
++	struct brcmf_pub *drvr = bus_if->drvr;
++	struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
++	struct brcmf_commonring *commonring;
++	u16 i;
++	struct brcmf_flowring_ring *ring;
++	struct brcmf_flowring_hash *hash;
++
++	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
++	seq_printf(seq, "h2d_ctl_submit: rp %4u, wp %4u, depth %4u\n",
++		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
++	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_RXPOST_SUBMIT];
++	seq_printf(seq, "h2d_rx_submit:  rp %4u, wp %4u, depth %4u\n",
++		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
++	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_CONTROL_COMPLETE];
++	seq_printf(seq, "d2h_ctl_cmplt:  rp %4u, wp %4u, depth %4u\n",
++		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
++	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_TX_COMPLETE];
++	seq_printf(seq, "d2h_tx_cmplt:   rp %4u, wp %4u, depth %4u\n",
++		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
++	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE];
++	seq_printf(seq, "d2h_rx_cmplt:   rp %4u, wp %4u, depth %4u\n",
++		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
++
++	seq_printf(seq, "\nh2d_flowrings: depth %u\n",
++		   BRCMF_H2D_TXFLOWRING_MAX_ITEM);
++	seq_puts(seq, "Active flowrings:\n");
++	hash = msgbuf->flow->hash;
++	for (i = 0; i < msgbuf->flow->nrofrings; i++) {
++		if (!msgbuf->flow->rings[i])
++			continue;
++		ring = msgbuf->flow->rings[i];
++		if (ring->status != RING_OPEN)
++			continue;
++		commonring = msgbuf->flowrings[i];
++		hash = &msgbuf->flow->hash[ring->hash_id];
++		seq_printf(seq, "id %3u: rp %4u, wp %4u, qlen %4u, blocked %u\n"
++				"        ifidx %u, fifo %u, da %pM\n",
++				i, commonring->r_ptr, commonring->w_ptr,
++				skb_queue_len(&ring->skblist), ring->blocked,
++				hash->ifidx, hash->fifo, hash->mac);
++	}
++
++	return 0;
++}
++#else
++static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
++{
++	return 0;
++}
++#endif
+ 
+ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
+ {
+@@ -1460,6 +1514,8 @@ int brcmf_proto_msgbuf_attach(struct brc
+ 	spin_lock_init(&msgbuf->flowring_work_lock);
+ 	INIT_LIST_HEAD(&msgbuf->work_queue);
+ 
++	brcmf_debugfs_add_entry(drvr, "msgbuf_stats", brcmf_msgbuf_stats_read);
++
+ 	return 0;
+ 
+ fail:
diff --git a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch b/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch
deleted file mode 100644
index 9105a64..0000000
--- a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:23 +0100
-Subject: [PATCH] mac80211: mesh: avoid pointless station lookup
-
-In ieee80211_build_hdr(), the station is looked up to build the
-header correctly (QoS field) and to check for authorization. For
-mesh, authorization isn't checked here, and QoS capability is
-mandatory, so the station lookup can be avoided.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -2130,12 +2130,14 @@ static struct sk_buff *ieee80211_build_h
- 	}
- 
- 	/*
--	 * There's no need to try to look up the destination
--	 * if it is a multicast address (which can only happen
--	 * in AP mode)
-+	 * There's no need to try to look up the destination station
-+	 * if it is a multicast address. In mesh, there's no need to
-+	 * look up the station at all as it always must be QoS capable
-+	 * and mesh mode checks authorization later.
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast && !have_station) {
-+	if (!multicast && !have_station &&
-+	    !ieee80211_vif_is_mesh(&sdata->vif)) {
- 		sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
diff --git a/package/kernel/mac80211/patches/315-brcmfmac-make-use-of-cfg80211_check_combinations.patch b/package/kernel/mac80211/patches/315-brcmfmac-make-use-of-cfg80211_check_combinations.patch
new file mode 100644
index 0000000..281f02b
--- /dev/null
+++ b/package/kernel/mac80211/patches/315-brcmfmac-make-use-of-cfg80211_check_combinations.patch
@@ -0,0 +1,83 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Thu, 20 Aug 2015 22:06:05 +0200
+Subject: [PATCH] brcmfmac: make use of cfg80211_check_combinations()
+
+Use cfg80211_check_combinations() so we can bail out early when an
+interface add or change results in an invalid combination.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -469,6 +469,36 @@ brcmf_find_wpsie(const u8 *parse, u32 le
+ 	return NULL;
+ }
+ 
++static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg,
++				     struct brcmf_cfg80211_vif *vif,
++				     enum nl80211_iftype new_type)
++{
++	int iftype_num[NUM_NL80211_IFTYPES];
++	struct brcmf_cfg80211_vif *pos;
++
++	memset(&iftype_num[0], 0, sizeof(iftype_num));
++	list_for_each_entry(pos, &cfg->vif_list, list)
++		if (pos == vif)
++			iftype_num[new_type]++;
++		else
++			iftype_num[pos->wdev.iftype]++;
++
++	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
++}
++
++static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg,
++				  enum nl80211_iftype new_type)
++{
++	int iftype_num[NUM_NL80211_IFTYPES];
++	struct brcmf_cfg80211_vif *pos;
++
++	memset(&iftype_num[0], 0, sizeof(iftype_num));
++	list_for_each_entry(pos, &cfg->vif_list, list)
++		iftype_num[pos->wdev.iftype]++;
++
++	iftype_num[new_type]++;
++	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
++}
+ 
+ static void convert_key_from_CPU(struct brcmf_wsec_key *key,
+ 				 struct brcmf_wsec_key_le *key_le)
+@@ -663,8 +693,14 @@ static struct wireless_dev *brcmf_cfg802
+ 						     struct vif_params *params)
+ {
+ 	struct wireless_dev *wdev;
++	int err;
+ 
+ 	brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
++	err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
++	if (err) {
++		brcmf_err("iface validation failed: err=%d\n", err);
++		return ERR_PTR(err);
++	}
+ 	switch (type) {
+ 	case NL80211_IFTYPE_ADHOC:
+ 	case NL80211_IFTYPE_STATION:
+@@ -823,8 +859,12 @@ brcmf_cfg80211_change_iface(struct wiphy
+ 	s32 ap = 0;
+ 	s32 err = 0;
+ 
+-	brcmf_dbg(TRACE, "Enter, ndev=%p, type=%d\n", ndev, type);
+-
++	brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
++	err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
++	if (err) {
++		brcmf_err("iface validation failed: err=%d\n", err);
++		return err;
++	}
+ 	switch (type) {
+ 	case NL80211_IFTYPE_MONITOR:
+ 	case NL80211_IFTYPE_WDS:
diff --git a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch b/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch
deleted file mode 100644
index d143025..0000000
--- a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 14:18:27 +0100
-Subject: [PATCH] mac80211: avoid duplicate TX path station lookup
-
-Instead of looking up the destination station twice in the TX path
-(first to build the header, and then for control processing), save
-it when building the header and use it later in the TX path.
-
-To avoid having to look up the station in the many callers, allow
-those to pass %NULL which keeps the existing lookup.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -3565,7 +3565,7 @@ static int ieee80211_probe_client(struct
- 		nullfunc->qos_ctrl = cpu_to_le16(7);
- 
- 	local_bh_disable();
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
- 	local_bh_enable();
- 	rcu_read_unlock();
- 
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -1775,7 +1775,8 @@ void mac80211_ev_michael_mic_failure(str
- 				     gfp_t gfp);
- void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
- 			       bool bss_notify);
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+		    struct sta_info *sta, struct sk_buff *skb);
- 
- void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
- 				 struct sk_buff *skb, int tid,
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -1279,7 +1279,7 @@ static void ieee80211_send_null_response
- 	}
- 
- 	info->band = chanctx_conf->def.chan->band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
- 	rcu_read_unlock();
- }
- 
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1110,11 +1110,13 @@ static bool ieee80211_tx_prep_agg(struct
- 
- /*
-  * initialises @tx
-+ * pass %NULL for the station if unknown, a valid pointer if known
-+ * or an ERR_PTR() if the station is known not to exist
-  */
- static ieee80211_tx_result
- ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
- 		     struct ieee80211_tx_data *tx,
--		     struct sk_buff *skb)
-+		     struct sta_info *sta, struct sk_buff *skb)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_hdr *hdr;
-@@ -1137,17 +1139,22 @@ ieee80211_tx_prepare(struct ieee80211_su
- 
- 	hdr = (struct ieee80211_hdr *) skb->data;
- 
--	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
--		tx->sta = rcu_dereference(sdata->u.vlan.sta);
--		if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr)
--			return TX_DROP;
--	} else if (info->flags & (IEEE80211_TX_CTL_INJECTED |
--				  IEEE80211_TX_INTFL_NL80211_FRAME_TX) ||
--		   tx->sdata->control_port_protocol == tx->skb->protocol) {
--		tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+	if (likely(sta)) {
-+		if (!IS_ERR(sta))
-+			tx->sta = sta;
-+	} else {
-+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-+			tx->sta = rcu_dereference(sdata->u.vlan.sta);
-+			if (!tx->sta && sdata->wdev.use_4addr)
-+				return TX_DROP;
-+		} else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
-+					  IEEE80211_TX_CTL_INJECTED) ||
-+			   tx->sdata->control_port_protocol == tx->skb->protocol) {
-+			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+		}
-+		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
-+			tx->sta = sta_info_get(sdata, hdr->addr1);
- 	}
--	if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
--		tx->sta = sta_info_get(sdata, hdr->addr1);
- 
- 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
- 	    !ieee80211_is_qos_nullfunc(hdr->frame_control) &&
-@@ -1485,7 +1492,7 @@ bool ieee80211_tx_prepare_skb(struct iee
- 	struct ieee80211_tx_data tx;
- 	struct sk_buff *skb2;
- 
--	if (ieee80211_tx_prepare(sdata, &tx, skb) == TX_DROP)
-+	if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP)
- 		return false;
- 
- 	info->band = band;
-@@ -1518,7 +1525,8 @@ EXPORT_SYMBOL(ieee80211_tx_prepare_skb);
-  * Returns false if the frame couldn't be transmitted but was queued instead.
-  */
- static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata,
--			 struct sk_buff *skb, bool txpending)
-+			 struct sta_info *sta, struct sk_buff *skb,
-+			 bool txpending)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_data tx;
-@@ -1534,7 +1542,7 @@ static bool ieee80211_tx(struct ieee8021
- 
- 	/* initialises tx */
- 	led_len = skb->len;
--	res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
-+	res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb);
- 
- 	if (unlikely(res_prepare == TX_DROP)) {
- 		ieee80211_free_txskb(&local->hw, skb);
-@@ -1590,7 +1598,8 @@ static int ieee80211_skb_resize(struct i
- 	return 0;
- }
- 
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+		    struct sta_info *sta, struct sk_buff *skb)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-@@ -1625,7 +1634,7 @@ void ieee80211_xmit(struct ieee80211_sub
- 	}
- 
- 	ieee80211_set_qos_hdr(sdata, skb);
--	ieee80211_tx(sdata, skb, false);
-+	ieee80211_tx(sdata, sta, skb, false);
- }
- 
- static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb)
-@@ -1846,7 +1855,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
- 		goto fail_rcu;
- 
- 	info->band = chandef->chan->band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, NULL, skb);
- 	rcu_read_unlock();
- 
- 	return NETDEV_TX_OK;
-@@ -1877,7 +1886,8 @@ fail:
-  * Returns: the (possibly reallocated) skb or an ERR_PTR() code
-  */
- static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
--					   struct sk_buff *skb, u32 info_flags)
-+					   struct sk_buff *skb, u32 info_flags,
-+					   struct sta_info **sta_out)
- {
- 	struct ieee80211_local *local = sdata->local;
- 	struct ieee80211_tx_info *info;
-@@ -1920,6 +1930,7 @@ static struct sk_buff *ieee80211_build_h
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 			have_station = true;
-+			*sta_out = sta;
- 		} else if (sdata->wdev.use_4addr) {
- 			ret = -ENOLINK;
- 			goto free;
-@@ -2073,6 +2084,7 @@ static struct sk_buff *ieee80211_build_h
- 			have_station = true;
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
-+			*sta_out = sta;
- 		}  else if (sdata->u.mgd.use_4addr &&
- 			    cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2136,13 +2148,18 @@ static struct sk_buff *ieee80211_build_h
- 	 * and mesh mode checks authorization later.
- 	 */
- 	multicast = is_multicast_ether_addr(hdr.addr1);
--	if (!multicast && !have_station &&
--	    !ieee80211_vif_is_mesh(&sdata->vif)) {
--		sta = sta_info_get(sdata, hdr.addr1);
-+	if (multicast) {
-+		*sta_out = ERR_PTR(-ENOENT);
-+	} else if (!have_station && !ieee80211_vif_is_mesh(&sdata->vif)) {
-+		if (sdata->control_port_protocol == skb->protocol)
-+			sta = sta_info_get_bss(sdata, hdr.addr1);
-+		else
-+			sta = sta_info_get(sdata, hdr.addr1);
- 		if (sta) {
- 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- 			wme_sta = sta->sta.wme;
- 		}
-+		*sta_out = sta ?: ERR_PTR(-ENOENT);
- 	}
- 
- 	/* For mesh, the use of the QoS header is mandatory */
-@@ -2320,6 +2337,7 @@ void __ieee80211_subif_start_xmit(struct
- 				  u32 info_flags)
- {
- 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-+	struct sta_info *sta = NULL;
- 
- 	if (unlikely(skb->len < ETH_HLEN)) {
- 		kfree_skb(skb);
-@@ -2328,7 +2346,7 @@ void __ieee80211_subif_start_xmit(struct
- 
- 	rcu_read_lock();
- 
--	skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+	skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta);
- 	if (IS_ERR(skb))
- 		goto out;
- 
-@@ -2336,7 +2354,7 @@ void __ieee80211_subif_start_xmit(struct
- 	dev->stats.tx_bytes += skb->len;
- 	dev->trans_start = jiffies;
- 
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, sta, skb);
-  out:
- 	rcu_read_unlock();
- }
-@@ -2364,10 +2382,11 @@ ieee80211_build_data_template(struct iee
- 		.local = sdata->local,
- 		.sdata = sdata,
- 	};
-+	struct sta_info *sta_ignore;
- 
- 	rcu_read_lock();
- 
--	skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+	skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta_ignore);
- 	if (IS_ERR(skb))
- 		goto out;
- 
-@@ -2425,7 +2444,7 @@ static bool ieee80211_tx_pending_skb(str
- 			return true;
- 		}
- 		info->band = chanctx_conf->def.chan->band;
--		result = ieee80211_tx(sdata, skb, true);
-+		result = ieee80211_tx(sdata, NULL, skb, true);
- 	} else {
- 		struct sk_buff_head skbs;
- 
-@@ -3163,7 +3182,7 @@ ieee80211_get_buffered_bc(struct ieee802
- 
- 		if (sdata->vif.type == NL80211_IFTYPE_AP)
- 			sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
--		if (!ieee80211_tx_prepare(sdata, &tx, skb))
-+		if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb))
- 			break;
- 		dev_kfree_skb_any(skb);
- 	}
-@@ -3295,6 +3314,6 @@ void __ieee80211_tx_skb_tid_band(struct
- 	 */
- 	local_bh_disable();
- 	IEEE80211_SKB_CB(skb)->band = band;
--	ieee80211_xmit(sdata, skb);
-+	ieee80211_xmit(sdata, NULL, skb);
- 	local_bh_enable();
- }
diff --git a/package/kernel/mac80211/patches/316-brcmfmac-block-the-correct-flowring-when-backup-queu.patch b/package/kernel/mac80211/patches/316-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
new file mode 100644
index 0000000..2d5f7b9
--- /dev/null
+++ b/package/kernel/mac80211/patches/316-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
@@ -0,0 +1,48 @@
+From: Franky Lin <frankyl@broadcom.com>
+Date: Thu, 20 Aug 2015 22:06:06 +0200
+Subject: [PATCH] brcmfmac: block the correct flowring when backup queue
+ overflow
+
+brcmf_flowring_block blocks the last active flowring under the same
+interface instead of the one provided by caller. This could lead to a
+dead lock of netif stop if there are more than one flowring under the
+interface and the traffic is high enough so brcmf_flowring_enqueue can
+not unblock the ring right away.
+
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Franky Lin <frankyl@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
+@@ -194,11 +194,15 @@ static void brcmf_flowring_block(struct
+ 	spin_lock_irqsave(&flow->block_lock, flags);
+ 
+ 	ring = flow->rings[flowid];
++	if (ring->blocked == blocked) {
++		spin_unlock_irqrestore(&flow->block_lock, flags);
++		return;
++	}
+ 	ifidx = brcmf_flowring_ifidx_get(flow, flowid);
+ 
+ 	currently_blocked = false;
+ 	for (i = 0; i < flow->nrofrings; i++) {
+-		if (flow->rings[i]) {
++		if ((flow->rings[i]) && (i != flowid)) {
+ 			ring = flow->rings[i];
+ 			if ((ring->status == RING_OPEN) &&
+ 			    (brcmf_flowring_ifidx_get(flow, i) == ifidx)) {
+@@ -209,8 +213,8 @@ static void brcmf_flowring_block(struct
+ 			}
+ 		}
+ 	}
+-	ring->blocked = blocked;
+-	if (currently_blocked == blocked) {
++	flow->rings[flowid]->blocked = blocked;
++	if (currently_blocked) {
+ 		spin_unlock_irqrestore(&flow->block_lock, flags);
+ 		return;
+ 	}
diff --git a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch b/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch
deleted file mode 100644
index 77a82c2..0000000
--- a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Linville <linville@tuxdriver.com>
-Date: Tue, 31 Mar 2015 10:49:14 -0400
-Subject: [PATCH] mac80211: reduce log spam from ieee80211_handle_pwr_constr
-
-This changes a couple of messages from sdata_info to sdata_dbg.
-This should reduce some log spam, as reported here:
-
-	https://bugzilla.redhat.com/show_bug.cgi?id=1206468
-
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/mlme.c
-+++ b/net/mac80211/mlme.c
-@@ -1347,15 +1347,15 @@ static u32 ieee80211_handle_pwr_constr(s
- 	 */
- 	if (has_80211h_pwr &&
- 	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
--		sdata_info(sdata,
--			   "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
--			   pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
--			   sdata->u.mgd.bssid);
-+		sdata_dbg(sdata,
-+			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
-+			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
-+			  sdata->u.mgd.bssid);
- 		new_ap_level = pwr_level_80211h;
- 	} else {  /* has_cisco_pwr is always true here. */
--		sdata_info(sdata,
--			   "Limiting TX power to %d dBm as advertised by %pM\n",
--			   pwr_level_cisco, sdata->u.mgd.bssid);
-+		sdata_dbg(sdata,
-+			  "Limiting TX power to %d dBm as advertised by %pM\n",
-+			  pwr_level_cisco, sdata->u.mgd.bssid);
- 		new_ap_level = pwr_level_cisco;
- 	}
- 
diff --git a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch b/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch
deleted file mode 100644
index e005fe7..0000000
--- a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:41 +0100
-Subject: [PATCH] brcmfmac: Fix race condition in msgbuf ioctl processing.
-
-Msgbuf is using a wait_event_timeout to wait for the response on
-an ioctl. The wakeup routine uses waitqueue_active to see if
-wait_event_timeout has been called. There is a chance that the
-response arrives before wait_event_timeout is called, this
-will result in situation that wait_event_timeout never gets
-woken again and assumed result will be a timeout. This patch
-removes that errornous situation by always setting the
-ctl_completed var before checking for queue active.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -481,10 +481,9 @@ static int brcmf_msgbuf_ioctl_resp_wait(
- 
- static void brcmf_msgbuf_ioctl_resp_wake(struct brcmf_msgbuf *msgbuf)
- {
--	if (waitqueue_active(&msgbuf->ioctl_resp_wait)) {
--		msgbuf->ctl_completed = true;
-+	msgbuf->ctl_completed = true;
-+	if (waitqueue_active(&msgbuf->ioctl_resp_wait))
- 		wake_up(&msgbuf->ioctl_resp_wait);
--	}
- }
- 
- 
diff --git a/package/kernel/mac80211/patches/317-brcmfmac-bump-highest-event-number-for-4339-firmware.patch b/package/kernel/mac80211/patches/317-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
new file mode 100644
index 0000000..7378401
--- /dev/null
+++ b/package/kernel/mac80211/patches/317-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
@@ -0,0 +1,52 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Thu, 20 Aug 2015 22:06:07 +0200
+Subject: [PATCH] brcmfmac: bump highest event number for 4339 firmware
+
+The event mask length is determined by the highest event number
+that is specified in the driver. When this length is shorter than
+firmware expects setting event mask will fail and device becomes
+pretty useless. This issue was reported with bcm4339 firmware that
+was recently released.
+
+Reported-by: Pontus Fuchs <pontusf@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
+@@ -85,7 +85,6 @@ struct brcmf_event;
+ 	BRCMF_ENUM_DEF(IF, 54) \
+ 	BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \
+ 	BRCMF_ENUM_DEF(RSSI, 56) \
+-	BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \
+ 	BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \
+ 	BRCMF_ENUM_DEF(ACTION_FRAME, 59) \
+ 	BRCMF_ENUM_DEF(ACTION_FRAME_COMPLETE, 60) \
+@@ -103,8 +102,7 @@ struct brcmf_event;
+ 	BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \
+ 	BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \
+ 	BRCMF_ENUM_DEF(TDLS_PEER_EVENT, 92) \
+-	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) \
+-	BRCMF_ENUM_DEF(PSTA_PRIMARY_INTF_IND, 128)
++	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127)
+ 
+ #define BRCMF_ENUM_DEF(id, val) \
+ 	BRCMF_E_##id = (val),
+@@ -112,7 +110,11 @@ struct brcmf_event;
+ /* firmware event codes sent by the dongle */
+ enum brcmf_fweh_event_code {
+ 	BRCMF_FWEH_EVENT_ENUM_DEFLIST
+-	BRCMF_E_LAST
++	/* this determines event mask length which must match
++	 * minimum length check in device firmware so it is
++	 * hard-coded here.
++	 */
++	BRCMF_E_LAST = 139
+ };
+ #undef BRCMF_ENUM_DEF
+ 
diff --git a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch b/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch
deleted file mode 100644
index c2cd1c5..0000000
--- a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:23 +0100
-Subject: [PATCH] brcmfmac: Update msgbuf commonring size for improved
- throughput.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-@@ -17,11 +17,11 @@
- 
- #ifdef CPTCFG_BRCMFMAC_PROTO_MSGBUF
- 
--#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM	20
--#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM	256
--#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM	20
-+#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM	64
-+#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM	512
-+#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM	64
- #define BRCMF_D2H_MSGRING_TX_COMPLETE_MAX_ITEM		1024
--#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM		256
-+#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM		512
- #define BRCMF_H2D_TXFLOWRING_MAX_ITEM			512
- 
- #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_ITEMSIZE	40
diff --git a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch b/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch
deleted file mode 100644
index 6af69eb..0000000
--- a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:46 +0100
-Subject: [PATCH] ath9k_htc: add new WMI_REG_RMW_CMDID command
-
-Since usb bus add extra delay on each request, a command
-with read + write requests is too expensive. We can dramtically
-reduce usb load by moving this command to firmware.
-
-In my tests, this patch will reduce channel scan time
-for about 5-10 seconds.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath.h
-+++ b/drivers/net/wireless/ath/ath.h
-@@ -131,6 +131,9 @@ struct ath_ops {
- 	void (*enable_write_buffer)(void *);
- 	void (*write_flush) (void *);
- 	u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
-+	void (*enable_rmw_buffer)(void *);
-+	void (*rmw_flush) (void *);
-+
- };
- 
- struct ath_common;
---- a/drivers/net/wireless/ath/ath9k/htc.h
-+++ b/drivers/net/wireless/ath/ath9k/htc.h
-@@ -444,6 +444,10 @@ static inline void ath9k_htc_stop_btcoex
- #define OP_BT_SCAN                 BIT(4)
- #define OP_TSF_RESET               BIT(6)
- 
-+enum htc_op_flags {
-+	HTC_FWFLAG_NO_RMW,
-+};
-+
- struct ath9k_htc_priv {
- 	struct device *dev;
- 	struct ieee80211_hw *hw;
-@@ -482,6 +486,7 @@ struct ath9k_htc_priv {
- 	bool reconfig_beacon;
- 	unsigned int rxfilter;
- 	unsigned long op_flags;
-+	unsigned long fw_flags;
- 
- 	struct ath9k_hw_cal_data caldata;
- 	struct ath_spec_scan_priv spec_priv;
---- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-@@ -376,17 +376,139 @@ static void ath9k_regwrite_flush(void *h
- 	mutex_unlock(&priv->wmi->multi_write_mutex);
- }
- 
--static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+static void ath9k_reg_rmw_buffer(void *hw_priv,
-+				 u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	u32 rsp_status;
-+	int r;
-+
-+	mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+	/* Store the register/value */
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].reg =
-+		cpu_to_be32(reg_offset);
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].set =
-+		cpu_to_be32(set);
-+	priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].clr =
-+		cpu_to_be32(clr);
-+
-+	priv->wmi->multi_rmw_idx++;
-+
-+	/* If the buffer is full, send it out. */
-+	if (priv->wmi->multi_rmw_idx == MAX_RMW_CMD_NUMBER) {
-+		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &priv->wmi->multi_rmw,
-+			  sizeof(struct register_write) * priv->wmi->multi_rmw_idx,
-+			  (u8 *) &rsp_status, sizeof(rsp_status),
-+			  100);
-+		if (unlikely(r)) {
-+			ath_dbg(common, WMI,
-+				"REGISTER RMW FAILED, multi len: %d\n",
-+				priv->wmi->multi_rmw_idx);
-+		}
-+		priv->wmi->multi_rmw_idx = 0;
-+	}
-+
-+	mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_reg_rmw_flush(void *hw_priv)
- {
--	u32 val;
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	u32 rsp_status;
-+	int r;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+		return;
-+
-+	atomic_dec(&priv->wmi->m_rmw_cnt);
-+
-+	mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+	if (priv->wmi->multi_rmw_idx) {
-+		r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &priv->wmi->multi_rmw,
-+			  sizeof(struct register_rmw) * priv->wmi->multi_rmw_idx,
-+			  (u8 *) &rsp_status, sizeof(rsp_status),
-+			  100);
-+		if (unlikely(r)) {
-+			ath_dbg(common, WMI,
-+				"REGISTER RMW FAILED, multi len: %d\n",
-+				priv->wmi->multi_rmw_idx);
-+		}
-+		priv->wmi->multi_rmw_idx = 0;
-+	}
- 
--	val = ath9k_regread(hw_priv, reg_offset);
--	val &= ~clr;
--	val |= set;
--	ath9k_regwrite(hw_priv, val, reg_offset);
-+	mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_enable_rmw_buffer(void *hw_priv)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+		return;
-+
-+	atomic_inc(&priv->wmi->m_rmw_cnt);
-+}
-+
-+static u32 ath9k_reg_rmw_single(void *hw_priv,
-+				 u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+	struct register_rmw buf, buf_ret;
-+	int ret;
-+	u32 val = 0;
-+
-+	buf.reg = cpu_to_be32(reg_offset);
-+	buf.set = cpu_to_be32(set);
-+	buf.clr = cpu_to_be32(clr);
-+
-+	ret = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+			  (u8 *) &buf, sizeof(buf),
-+			  (u8 *) &buf_ret, sizeof(buf_ret),
-+			  100);
-+	if (unlikely(ret)) {
-+		ath_dbg(common, WMI, "REGISTER RMW FAILED:(0x%04x, %d)\n",
-+			reg_offset, ret);
-+	}
- 	return val;
- }
- 
-+static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+{
-+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+	struct ath_common *common = ath9k_hw_common(ah);
-+	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+	if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) {
-+		u32 val;
-+
-+		val = REG_READ(ah, reg_offset);
-+		val &= ~clr;
-+		val |= set;
-+		REG_WRITE(ah, reg_offset, val);
-+
-+		return 0;
-+	}
-+
-+	if (atomic_read(&priv->wmi->m_rmw_cnt))
-+		ath9k_reg_rmw_buffer(hw_priv, reg_offset, set, clr);
-+	else
-+		ath9k_reg_rmw_single(hw_priv, reg_offset, set, clr);
-+
-+	return 0;
-+}
-+
- static void ath_usb_read_cachesize(struct ath_common *common, int *csz)
- {
- 	*csz = L1_CACHE_BYTES >> 2;
-@@ -501,6 +623,8 @@ static int ath9k_init_priv(struct ath9k_
- 	ah->reg_ops.write = ath9k_regwrite;
- 	ah->reg_ops.enable_write_buffer = ath9k_enable_regwrite_buffer;
- 	ah->reg_ops.write_flush = ath9k_regwrite_flush;
-+	ah->reg_ops.enable_rmw_buffer = ath9k_enable_rmw_buffer;
-+	ah->reg_ops.rmw_flush = ath9k_reg_rmw_flush;
- 	ah->reg_ops.rmw = ath9k_reg_rmw;
- 	priv->ah = ah;
- 
-@@ -686,6 +810,12 @@ static int ath9k_init_firmware_version(s
- 		return -EINVAL;
- 	}
- 
-+	if (priv->fw_version_major == 1 && priv->fw_version_minor < 4)
-+		set_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags);
-+
-+	dev_info(priv->dev, "FW RMW support: %s\n",
-+		test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags) ? "Off" : "On");
-+
- 	return 0;
- }
- 
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -100,6 +100,18 @@
- 			(_ah)->reg_ops.write_flush((_ah));	\
- 	} while (0)
- 
-+#define ENABLE_REG_RMW_BUFFER(_ah)					\
-+	do {								\
-+		if ((_ah)->reg_ops.enable_rmw_buffer)	\
-+			(_ah)->reg_ops.enable_rmw_buffer((_ah)); \
-+	} while (0)
-+
-+#define REG_RMW_BUFFER_FLUSH(_ah)					\
-+	do {								\
-+		if ((_ah)->reg_ops.rmw_flush)		\
-+			(_ah)->reg_ops.rmw_flush((_ah));	\
-+	} while (0)
-+
- #define PR_EEP(_s, _val)						\
- 	do {								\
- 		len += scnprintf(buf + len, size - len, "%20s : %10d\n",\
---- a/drivers/net/wireless/ath/ath9k/wmi.c
-+++ b/drivers/net/wireless/ath/ath9k/wmi.c
-@@ -61,6 +61,8 @@ static const char *wmi_cmd_to_name(enum
- 		return "WMI_REG_READ_CMDID";
- 	case WMI_REG_WRITE_CMDID:
- 		return "WMI_REG_WRITE_CMDID";
-+	case WMI_REG_RMW_CMDID:
-+		return "WMI_REG_RMW_CMDID";
- 	case WMI_RC_STATE_CHANGE_CMDID:
- 		return "WMI_RC_STATE_CHANGE_CMDID";
- 	case WMI_RC_RATE_UPDATE_CMDID:
-@@ -101,6 +103,7 @@ struct wmi *ath9k_init_wmi(struct ath9k_
- 	spin_lock_init(&wmi->event_lock);
- 	mutex_init(&wmi->op_mutex);
- 	mutex_init(&wmi->multi_write_mutex);
-+	mutex_init(&wmi->multi_rmw_mutex);
- 	init_completion(&wmi->cmd_wait);
- 	INIT_LIST_HEAD(&wmi->pending_tx_events);
- 	tasklet_init(&wmi->wmi_event_tasklet, ath9k_wmi_event_tasklet,
---- a/drivers/net/wireless/ath/ath9k/wmi.h
-+++ b/drivers/net/wireless/ath/ath9k/wmi.h
-@@ -112,6 +112,7 @@ enum wmi_cmd_id {
- 	WMI_TX_STATS_CMDID,
- 	WMI_RX_STATS_CMDID,
- 	WMI_BITRATE_MASK_CMDID,
-+	WMI_REG_RMW_CMDID,
- };
- 
- enum wmi_event_id {
-@@ -125,12 +126,19 @@ enum wmi_event_id {
- };
- 
- #define MAX_CMD_NUMBER 62
-+#define MAX_RMW_CMD_NUMBER 15
- 
- struct register_write {
- 	__be32 reg;
- 	__be32 val;
- };
- 
-+struct register_rmw {
-+	__be32 reg;
-+	__be32 set;
-+	__be32 clr;
-+} __packed;
-+
- struct ath9k_htc_tx_event {
- 	int count;
- 	struct __wmi_event_txstatus txs;
-@@ -156,10 +164,18 @@ struct wmi {
- 
- 	spinlock_t wmi_lock;
- 
-+	/* multi write section */
- 	atomic_t mwrite_cnt;
- 	struct register_write multi_write[MAX_CMD_NUMBER];
- 	u32 multi_write_idx;
- 	struct mutex multi_write_mutex;
-+
-+	/* multi rmw section */
-+	atomic_t m_rmw_cnt;
-+	struct register_rmw multi_rmw[MAX_RMW_CMD_NUMBER];
-+	u32 multi_rmw_idx;
-+	struct mutex multi_rmw_mutex;
-+
- };
- 
- struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
diff --git a/package/kernel/mac80211/patches/319-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch b/package/kernel/mac80211/patches/319-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
new file mode 100644
index 0000000..97444b3
--- /dev/null
+++ b/package/kernel/mac80211/patches/319-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
@@ -0,0 +1,138 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:53 +0200
+Subject: [PATCH] brcmfmac: consolidate ifp lookup in driver core
+
+In rx path the firmware provide an interface index which is used to
+map to a struct brcmf_if instance. However, this involves some trick
+that is done in two places. This is changed by having driver core
+providing brcmf_get_ifp() function.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
+@@ -276,6 +276,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 			 struct sk_buff *pktbuf)
+ {
+ 	struct brcmf_proto_bcdc_header *h;
++	struct brcmf_if *ifp;
+ 
+ 	brcmf_dbg(BCDC, "Enter\n");
+ 
+@@ -289,30 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 	trace_brcmf_bcdchdr(pktbuf->data);
+ 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
+ 
+-	*ifidx = BCDC_GET_IF_IDX(h);
+-	if (*ifidx >= BRCMF_MAX_IFS) {
+-		brcmf_err("rx data ifnum out of range (%d)\n", *ifidx);
++	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
++	if (IS_ERR_OR_NULL(ifp)) {
++		brcmf_dbg(INFO, "no matching ifp found\n");
+ 		return -EBADE;
+ 	}
+-	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
+-	 * events this is easy because it contains the bssidx which maps
+-	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
+-	 * bssidx 1 is used for p2p0 and no data can be received or
+-	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
+-	 */
+-	if (*ifidx)
+-		(*ifidx)++;
+-
+ 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
+ 	    BCDC_PROTO_VER) {
+ 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
+-			  brcmf_ifname(drvr, *ifidx), h->flags);
++			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
+ 		return -EBADE;
+ 	}
+ 
+ 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
+ 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
+-			  brcmf_ifname(drvr, *ifidx), h->flags);
++			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
+ 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
+ 	}
+ 
+@@ -320,12 +312,15 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 
+ 	skb_pull(pktbuf, BCDC_HEADER_LEN);
+ 	if (do_fws)
+-		brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf);
++		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
++				  pktbuf);
+ 	else
+ 		skb_pull(pktbuf, h->data_offset << 2);
+ 
+ 	if (pktbuf->len == 0)
+ 		return -ENODATA;
++
++	*ifidx = ifp->ifidx;
+ 	return 0;
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -83,6 +83,25 @@ char *brcmf_ifname(struct brcmf_pub *drv
+ 	return "<if_none>";
+ }
+ 
++struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
++{
++	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
++		brcmf_err("ifidx %d out of range\n", ifidx);
++		return ERR_PTR(-ERANGE);
++	}
++
++	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
++	 * events this is easy because it contains the bssidx which maps
++	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
++	 * bssidx 1 is used for p2p0 and no data can be received or
++	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
++	 */
++	if (ifidx)
++		ifidx++;
++
++	return drvr->iflist[ifidx];
++}
++
+ static void _brcmf_set_multicast_list(struct work_struct *work)
+ {
+ 	struct brcmf_if *ifp;
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
+@@ -202,7 +202,7 @@ int brcmf_netdev_wait_pend8021x(struct b
+ 
+ /* Return pointer to interface name */
+ char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
+-
++struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
+ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
+ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
+ 			      char *name, u8 *mac_addr);
+--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+@@ -1081,16 +1081,8 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
+ {
+ 	struct brcmf_if *ifp;
+ 
+-	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
+-	 * events this is easy because it contains the bssidx which maps
+-	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
+-	 * bssidx 1 is used for p2p0 and no data can be received or
+-	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
+-	 */
+-	if (ifidx)
+-		(ifidx)++;
+-	ifp = msgbuf->drvr->iflist[ifidx];
+-	if (!ifp || !ifp->ndev) {
++	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
++	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
+ 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
+ 		brcmu_pkt_buf_free_skb(skb);
+ 		return;
diff --git a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch b/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch
deleted file mode 100644
index c4dd1af..0000000
--- a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:47 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal - use defs instead of magin
- numbers
-
-This function uses mixed styles for register names/numbers which
-is make harder reading and optimisation.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -430,22 +430,22 @@ static void ar9271_hw_pa_cal(struct ath_
- 	u32 regVal;
- 	unsigned int i;
- 	u32 regList[][2] = {
--		{ 0x786c, 0 },
--		{ 0x7854, 0 },
--		{ 0x7820, 0 },
--		{ 0x7824, 0 },
--		{ 0x7868, 0 },
--		{ 0x783c, 0 },
--		{ 0x7838, 0 } ,
--		{ 0x7828, 0 } ,
-+		{ AR9285_AN_TOP3, 0 },
-+		{ AR9285_AN_RXTXBB1, 0 },
-+		{ AR9285_AN_RF2G1, 0 },
-+		{ AR9285_AN_RF2G2, 0 },
-+		{ AR9285_AN_TOP2, 0 },
-+		{ AR9285_AN_RF2G8, 0 },
-+		{ AR9285_AN_RF2G7, 0 } ,
-+		{ AR9285_AN_RF2G3, 0 } ,
- 	};
- 
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
--	regVal = REG_READ(ah, 0x7834);
-+	regVal = REG_READ(ah, AR9285_AN_RF2G6);
- 	regVal &= (~(0x1));
--	REG_WRITE(ah, 0x7834, regVal);
-+	REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 	regVal = REG_READ(ah, 0x9808);
- 	regVal |= (0x1 << 27);
- 	REG_WRITE(ah, 0x9808, regVal);
-@@ -477,7 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 	 * does not matter since we turn it off
- 	 */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
--
-+	/* 7828, b0-11, ccom=fff */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
- 
- 	/* Set:
-@@ -490,15 +490,16 @@ static void ar9271_hw_pa_cal(struct ath_
- 
- 	/* find off_6_1; */
- 	for (i = 6; i > 0; i--) {
--		regVal = REG_READ(ah, 0x7834);
-+		regVal = REG_READ(ah, AR9285_AN_RF2G6);
- 		regVal |= (1 << (20 + i));
--		REG_WRITE(ah, 0x7834, regVal);
-+		REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 		udelay(1);
- 		/* regVal = REG_READ(ah, 0x7834); */
- 		regVal &= (~(0x1 << (20 + i)));
--		regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
-+		regVal |= (MS(REG_READ(ah, AR9285_AN_RF2G9),
-+			      AR9285_AN_RXTXBB1_SPARE9)
- 			    << (20 + i));
--		REG_WRITE(ah, 0x7834, regVal);
-+		REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- 	}
- 
- 	regVal = (regVal >> 20) & 0x7f;
-@@ -517,9 +518,9 @@ static void ar9271_hw_pa_cal(struct ath_
- 
- 	ENABLE_REGWRITE_BUFFER(ah);
- 
--	regVal = REG_READ(ah, 0x7834);
-+	regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
- 	regVal |= 0x1;
--	REG_WRITE(ah, 0x7834, regVal);
-+	REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
- 	regVal = REG_READ(ah, 0x9808);
- 	regVal &= (~(0x1 << 27));
- 	REG_WRITE(ah, 0x9808, regVal);
diff --git a/package/kernel/mac80211/patches/320-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch b/package/kernel/mac80211/patches/320-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
new file mode 100644
index 0000000..632714c
--- /dev/null
+++ b/package/kernel/mac80211/patches/320-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
@@ -0,0 +1,222 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:54 +0200
+Subject: [PATCH] brcmfmac: make brcmf_proto_hdrpull() return struct
+ brcmf_if instance
+
+Avoid spreading the ifidx in the driver, but have it return the
+struct brcmf_if instance.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
+@@ -272,11 +272,11 @@ brcmf_proto_bcdc_hdrpush(struct brcmf_pu
+ }
+ 
+ static int
+-brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
+-			 struct sk_buff *pktbuf)
++brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws,
++			 struct sk_buff *pktbuf, struct brcmf_if **ifp)
+ {
+ 	struct brcmf_proto_bcdc_header *h;
+-	struct brcmf_if *ifp;
++	struct brcmf_if *tmp_if;
+ 
+ 	brcmf_dbg(BCDC, "Enter\n");
+ 
+@@ -290,21 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 	trace_brcmf_bcdchdr(pktbuf->data);
+ 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
+ 
+-	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
+-	if (IS_ERR_OR_NULL(ifp)) {
++	tmp_if = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
++	if (!tmp_if) {
+ 		brcmf_dbg(INFO, "no matching ifp found\n");
+ 		return -EBADE;
+ 	}
+ 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
+ 	    BCDC_PROTO_VER) {
+ 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
+-			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
++			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
+ 		return -EBADE;
+ 	}
+ 
+ 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
+ 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
+-			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
++			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
+ 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
+ 	}
+ 
+@@ -312,7 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 
+ 	skb_pull(pktbuf, BCDC_HEADER_LEN);
+ 	if (do_fws)
+-		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
++		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
+ 				  pktbuf);
+ 	else
+ 		skb_pull(pktbuf, h->data_offset << 2);
+@@ -320,7 +320,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 	if (pktbuf->len == 0)
+ 		return -ENODATA;
+ 
+-	*ifidx = ifp->ifidx;
++	*ifp = tmp_if;
+ 	return 0;
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -87,7 +87,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
+ {
+ 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
+ 		brcmf_err("ifidx %d out of range\n", ifidx);
+-		return ERR_PTR(-ERANGE);
++		return NULL;
+ 	}
+ 
+ 	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
+@@ -539,17 +539,15 @@ void brcmf_rx_frame(struct device *dev,
+ 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ 	struct brcmf_pub *drvr = bus_if->drvr;
+ 	struct brcmf_skb_reorder_data *rd;
+-	u8 ifidx;
+ 	int ret;
+ 
+ 	brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
+ 
+ 	/* process and remove protocol-specific header */
+-	ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb);
+-	ifp = drvr->iflist[ifidx];
++	ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
+ 
+ 	if (ret || !ifp || !ifp->ndev) {
+-		if ((ret != -ENODATA) && ifp)
++		if (ret != -ENODATA && ifp)
+ 			ifp->stats.rx_errors++;
+ 		brcmu_pkt_buf_free_skb(skb);
+ 		return;
+@@ -592,17 +590,17 @@ void brcmf_txcomplete(struct device *dev
+ {
+ 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ 	struct brcmf_pub *drvr = bus_if->drvr;
+-	u8 ifidx;
++	struct brcmf_if *ifp;
+ 
+ 	/* await txstatus signal for firmware if active */
+ 	if (brcmf_fws_fc_active(drvr->fws)) {
+ 		if (!success)
+ 			brcmf_fws_bustxfail(drvr->fws, txp);
+ 	} else {
+-		if (brcmf_proto_hdrpull(drvr, false, &ifidx, txp))
++		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
+ 			brcmu_pkt_buf_free_skb(txp);
+ 		else
+-			brcmf_txfinalize(drvr, txp, ifidx, success);
++			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
+ 	}
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+@@ -1448,7 +1448,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
+ 	struct sk_buff *skb;
+ 	struct brcmf_skbuff_cb *skcb;
+ 	struct brcmf_fws_mac_descriptor *entry = NULL;
+-	u8 ifidx;
++	struct brcmf_if *ifp;
+ 
+ 	brcmf_dbg(DATA, "flags %d\n", flags);
+ 
+@@ -1497,15 +1497,16 @@ brcmf_fws_txs_process(struct brcmf_fws_i
+ 	}
+ 	brcmf_fws_macdesc_return_req_credit(skb);
+ 
+-	if (brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb)) {
++	ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp);
++	if (ret) {
+ 		brcmu_pkt_buf_free_skb(skb);
+ 		return -EINVAL;
+ 	}
+ 	if (!remove_from_hanger)
+-		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifidx,
++		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
+ 						    genbit, seq);
+ 	if (remove_from_hanger || ret)
+-		brcmf_txfinalize(fws->drvr, skb, ifidx, true);
++		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
+ 
+ 	return 0;
+ }
+@@ -1848,7 +1849,7 @@ static int brcmf_fws_commit_skb(struct b
+ 		entry->transit_count--;
+ 		if (entry->suppressed)
+ 			entry->suppr_transit_count--;
+-		brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
++		(void)brcmf_proto_hdrpull(fws->drvr, false, skb, NULL);
+ 		goto rollback;
+ 	}
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+@@ -522,7 +522,7 @@ static int brcmf_msgbuf_set_dcmd(struct
+ 
+ 
+ static int brcmf_msgbuf_hdrpull(struct brcmf_pub *drvr, bool do_fws,
+-				u8 *ifidx, struct sk_buff *skb)
++				struct sk_buff *skb, struct brcmf_if **ifp)
+ {
+ 	return -ENODEV;
+ }
+@@ -1082,7 +1082,7 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
+ 	struct brcmf_if *ifp;
+ 
+ 	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
+-	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
++	if (!ifp || !ifp->ndev) {
+ 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
+ 		brcmu_pkt_buf_free_skb(skb);
+ 		return;
+--- a/drivers/net/wireless/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h
+@@ -24,8 +24,8 @@ enum proto_addr_mode {
+ 
+ 
+ struct brcmf_proto {
+-	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
+-		       struct sk_buff *skb);
++	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws,
++		       struct sk_buff *skb, struct brcmf_if **ifp);
+ 	int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd,
+ 			  void *buf, uint len);
+ 	int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
+@@ -46,9 +46,19 @@ int brcmf_proto_attach(struct brcmf_pub
+ void brcmf_proto_detach(struct brcmf_pub *drvr);
+ 
+ static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
+-				      u8 *ifidx, struct sk_buff *skb)
++				      struct sk_buff *skb,
++				      struct brcmf_if **ifp)
+ {
+-	return drvr->proto->hdrpull(drvr, do_fws, ifidx, skb);
++	struct brcmf_if *tmp = NULL;
++
++	/* assure protocol is always called with
++	 * non-null initialized pointer.
++	 */
++	if (ifp)
++		*ifp = NULL;
++	else
++		ifp = &tmp;
++	return drvr->proto->hdrpull(drvr, do_fws, skb, ifp);
+ }
+ static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx,
+ 					 uint cmd, void *buf, uint len)
diff --git a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch b/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch
deleted file mode 100644
index f05287d..0000000
--- a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:48 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use proper makroses.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -443,33 +443,30 @@ static void ar9271_hw_pa_cal(struct ath_
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
--	regVal = REG_READ(ah, AR9285_AN_RF2G6);
--	regVal &= (~(0x1));
--	REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
--	regVal = REG_READ(ah, 0x9808);
--	regVal |= (0x1 << 27);
--	REG_WRITE(ah, 0x9808, regVal);
--
-+	/* 7834, b1=0 */
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+	/* 9808, b27=1 */
-+	REG_SET_BIT(ah, 0x9808, 1 << 27);
- 	/* 786c,b23,1, pwddac=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
-+	REG_SET_BIT(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC);
- 	/* 7854, b5,1, pdrxtxbb=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1);
- 	/* 7854, b7,1, pdv2i=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I);
- 	/* 7854, b8,1, pddacinterface=1 */
--	REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
-+	REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF);
- 	/* 7824,b12,0, offcal=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL);
- 	/* 7838, b1,0, pwddb=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB);
- 	/* 7820,b11,0, enpacal=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL);
- 	/* 7820,b25,1, pdpadrv1=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1);
- 	/* 7820,b24,0, pdpadrv2=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2);
- 	/* 7820,b23,0, pdpaout=0 */
--	REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
-+	REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT);
- 	/* 783c,b14-16,7, padrvgn2tab_0=7 */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
- 	/*
-@@ -516,15 +513,13 @@ static void ar9271_hw_pa_cal(struct ath_
- 		ah->pacal_info.prev_offset = regVal;
- 	}
- 
--	ENABLE_REGWRITE_BUFFER(ah);
- 
--	regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
--	regVal |= 0x1;
--	REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
--	regVal = REG_READ(ah, 0x9808);
--	regVal &= (~(0x1 << 27));
--	REG_WRITE(ah, 0x9808, regVal);
-+	/* 7834, b1=1 */
-+	REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+	/* 9808, b27=0 */
-+	REG_CLR_BIT(ah, 0x9808, 1 << 27);
- 
-+	ENABLE_REGWRITE_BUFFER(ah);
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		REG_WRITE(ah, regList[i][0], regList[i][1]);
- 
diff --git a/package/kernel/mac80211/patches/321-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch b/package/kernel/mac80211/patches/321-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
new file mode 100644
index 0000000..3360cbc
--- /dev/null
+++ b/package/kernel/mac80211/patches/321-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
@@ -0,0 +1,87 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:55 +0200
+Subject: [PATCH] brcmfmac: change parameters for
+ brcmf_remove_interface()
+
+Just pass the interface to be removed, ie. the struct brcmf_if instance.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -4983,7 +4983,7 @@ brcmf_notify_connect_status_ap(struct br
+ 		brcmf_dbg(CONN, "AP mode link down\n");
+ 		complete(&cfg->vif_disabled);
+ 		if (ifp->vif->mbss)
+-			brcmf_remove_interface(ifp->drvr, ifp->bssidx);
++			brcmf_remove_interface(ifp);
+ 		return 0;
+ 	}
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -887,12 +887,13 @@ static void brcmf_del_if(struct brcmf_pu
+ 	}
+ }
+ 
+-void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx)
++void brcmf_remove_interface(struct brcmf_if *ifp)
+ {
+-	if (drvr->iflist[bssidx]) {
+-		brcmf_fws_del_interface(drvr->iflist[bssidx]);
+-		brcmf_del_if(drvr, bssidx);
+-	}
++	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp))
++		return;
++
++	brcmf_fws_del_interface(ifp);
++	brcmf_del_if(ifp->drvr, ifp->bssidx);
+ }
+ 
+ int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr)
+@@ -1122,7 +1123,7 @@ void brcmf_detach(struct device *dev)
+ 
+ 	/* make sure primary interface removed last */
+ 	for (i = BRCMF_MAX_IFS-1; i > -1; i--)
+-		brcmf_remove_interface(drvr, i);
++		brcmf_remove_interface(drvr->iflist[i]);
+ 
+ 	brcmf_cfg80211_detach(drvr->config);
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
+@@ -206,7 +206,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
+ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
+ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
+ 			      char *name, u8 *mac_addr);
+-void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx);
++void brcmf_remove_interface(struct brcmf_if *ifp);
+ int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
+ void brcmf_txflowblock_if(struct brcmf_if *ifp,
+ 			  enum brcmf_netif_stop_reason reason, bool state);
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
+@@ -222,7 +222,7 @@ static void brcmf_fweh_handle_if_event(s
+ 	err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
+ 
+ 	if (ifp && ifevent->action == BRCMF_E_IF_DEL)
+-		brcmf_remove_interface(drvr, ifevent->bssidx);
++		brcmf_remove_interface(ifp);
+ }
+ 
+ /**
+--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru
+ {
+ 	cfg80211_unregister_wdev(&vif->wdev);
+ 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
+-	brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx);
++	brcmf_remove_interface(vif->ifp);
+ 	brcmf_free_vif(vif);
+ }
+ 
diff --git a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch b/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch
deleted file mode 100644
index 7247369..0000000
--- a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:49 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use RMW buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -436,13 +436,14 @@ static void ar9271_hw_pa_cal(struct ath_
- 		{ AR9285_AN_RF2G2, 0 },
- 		{ AR9285_AN_TOP2, 0 },
- 		{ AR9285_AN_RF2G8, 0 },
--		{ AR9285_AN_RF2G7, 0 } ,
--		{ AR9285_AN_RF2G3, 0 } ,
-+		{ AR9285_AN_RF2G7, 0 },
-+		{ AR9285_AN_RF2G3, 0 },
- 	};
- 
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
- 		regList[i][1] = REG_READ(ah, regList[i][0]);
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=0 */
- 	REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- 	/* 9808, b27=1 */
-@@ -476,6 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
- 	/* 7828, b0-11, ccom=fff */
- 	REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	/* Set:
- 	 * localmode=1,bmode=1,bmoderxtx=1,synthon=1,
-@@ -514,10 +516,12 @@ static void ar9271_hw_pa_cal(struct ath_
- 	}
- 
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=1 */
- 	REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- 	/* 9808, b27=0 */
- 	REG_CLR_BIT(ah, 0x9808, 1 << 27);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	ENABLE_REGWRITE_BUFFER(ah);
- 	for (i = 0; i < ARRAY_SIZE(regList); i++)
diff --git a/package/kernel/mac80211/patches/322-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch b/package/kernel/mac80211/patches/322-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
new file mode 100644
index 0000000..2b61f4e
--- /dev/null
+++ b/package/kernel/mac80211/patches/322-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
@@ -0,0 +1,92 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:56 +0200
+Subject: [PATCH] brcmfmac: only call brcmf_cfg80211_detach() when attach
+ was successful
+
+In brcmf_bus_start() the function brcmf_cfg80211_attach() is called which
+may fail. If this happens we should not call brcmf_cfg80211_detach() in
+the failure path as it will result in NULL pointer dereference:
+
+  brcmf_fweh_activate_events: Set event_msgs error (-5)
+  brcmf_bus_start: failed: -5
+  brcmf_sdio_firmware_callback: dongle is not responding
+  BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
+  IP: [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
+  PGD 0
+  Oops: 0000 [#1] SMP
+  Modules linked in: brcmfmac(O) brcmutil(O) cfg80211 auth_rpcgss
+  CPU: 1 PID: 45 Comm: kworker/1:1 Tainted: G           O
+  Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
+  Workqueue: events request_firmware_work_func
+  task: ffff880036c09ac0 ti: ffff880036dd4000 task.ti: ffff880036dd4000
+  RIP: 0010:[<ffffffff811e8f08>]  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
+  RSP: 0018:ffff880036dd7a28  EFLAGS: 00010246
+  RAX: ffff880036c09ac0 RBX: 0000000000000000 RCX: 000000007fffffff
+  RDX: 0000000000000000 RSI: ffffffff816578b9 RDI: 0000000000000000
+  RBP: ffff880036dd7a48 R08: 0000000000000000 R09: ffff880036c0b340
+  R10: 00000000000002ec R11: ffff880036dd7b08 R12: ffffffff816578b9
+  R13: 0000000000000000 R14: ffffffff816578b9 R15: ffff8800c6c87000
+  FS:  0000000000000000(0000) GS:ffff88012bc40000(0000) knlGS:0000000000000000
+  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
+  CR2: 0000000000000068 CR3: 0000000001a0b000 CR4: 00000000000006e0
+  Stack:
+   0000000000000000 ffffffff816578b9 0000000000000000 ffff8800c0d003c8
+   ffff880036dd7a78 ffffffff811e8ff5 0000000ffffffff1 ffffffff81a9b060
+   ffff8800c789f880 ffff8800c0d00000 ffff880036dd7a98 ffffffff811ebe0d
+  Call Trace:
+   [<ffffffff811e8ff5>] kernfs_find_and_get_ns+0x35/0x60
+   [<ffffffff811ebe0d>] sysfs_unmerge_group+0x1d/0x60
+   [<ffffffff81404ef2>] dpm_sysfs_remove+0x22/0x60
+   [<ffffffff813f9db9>] device_del+0x49/0x240
+   [<ffffffff815da768>] rfkill_unregister+0x58/0xc0
+   [<ffffffffa06bd91b>] wiphy_unregister+0xab/0x2f0 [cfg80211]
+   [<ffffffffa0742fe3>] brcmf_cfg80211_detach+0x23/0x50 [brcmfmac]
+   [<ffffffffa074d986>] brcmf_detach+0x86/0xe0 [brcmfmac]
+   [<ffffffffa0757de8>] brcmf_sdio_remove+0x48/0x120 [brcmfmac]
+   [<ffffffffa0758ed9>] brcmf_sdiod_remove+0x29/0xd0 [brcmfmac]
+   [<ffffffffa0759031>] brcmf_ops_sdio_remove+0xb1/0x110 [brcmfmac]
+   [<ffffffffa001c267>] sdio_bus_remove+0x37/0x100 [mmc_core]
+   [<ffffffff813fe026>] __device_release_driver+0x96/0x130
+   [<ffffffff813fe0e3>] device_release_driver+0x23/0x30
+   [<ffffffffa0754bc8>] brcmf_sdio_firmware_callback+0x2a8/0x5d0 [brcmfmac]
+   [<ffffffffa074deaf>] brcmf_fw_request_nvram_done+0x15f/0x5e0 [brcmfmac]
+   [<ffffffff8140142f>] ? devres_add+0x3f/0x50
+   [<ffffffff810642b5>] ? usermodehelper_read_unlock+0x15/0x20
+   [<ffffffff81400000>] ? platform_match+0x70/0xa0
+   [<ffffffff8140f400>] request_firmware_work_func+0x30/0x60
+   [<ffffffff8106828c>] process_one_work+0x14c/0x3d0
+   [<ffffffff8106862a>] worker_thread+0x11a/0x450
+   [<ffffffff81068510>] ? process_one_work+0x3d0/0x3d0
+   [<ffffffff8106d692>] kthread+0xd2/0xf0
+   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
+   [<ffffffff815ed35f>] ret_from_fork+0x3f/0x70
+   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
+  Code: e9 40 fe ff ff 48 89 d8 eb 87 66 0f 1f 84 00 00 00 00 00 66 66 66 66
+	90 55 48 89 e5 41 56 49 89 f6 41 55 49 89 d5 31 d2 41 54 53 <0f> b7
+	47 68 48 8b 5f 48 66 c1 e8 05 83 e0 01 4d 85 ed 0f b6 c8
+  RIP  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
+   RSP <ffff880036dd7a28>
+  CR2: 0000000000000068
+  ---[ end trace 87d6ec0d3fe46740 ]---
+
+Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -1049,7 +1049,10 @@ int brcmf_bus_start(struct device *dev)
+ fail:
+ 	if (ret < 0) {
+ 		brcmf_err("failed: %d\n", ret);
+-		brcmf_cfg80211_detach(drvr->config);
++		if (drvr->config) {
++			brcmf_cfg80211_detach(drvr->config);
++			drvr->config = NULL;
++		}
+ 		if (drvr->fws) {
+ 			brcmf_fws_del_interface(ifp);
+ 			brcmf_fws_deinit(drvr);
diff --git a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch b/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch
deleted file mode 100644
index 246bb9d..0000000
--- a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:50 +0100
-Subject: [PATCH] ath9k: add multi_read to be compatible with ath9k_htc
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -141,6 +141,16 @@ static unsigned int ath9k_ioread32(void
- 	return val;
- }
- 
-+static void ath9k_multi_ioread32(void *hw_priv, u32 *addr,
-+                                u32 *val, u16 count)
-+{
-+	int i;
-+
-+	for (i = 0; i < count; i++)
-+		val[i] = ath9k_ioread32(hw_priv, addr[i]);
-+}
-+
-+
- static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset,
- 				    u32 set, u32 clr)
- {
-@@ -530,6 +540,7 @@ static int ath9k_init_softc(u16 devid, s
- 	ah->hw = sc->hw;
- 	ah->hw_version.devid = devid;
- 	ah->reg_ops.read = ath9k_ioread32;
-+	ah->reg_ops.multi_read = ath9k_multi_ioread32;
- 	ah->reg_ops.write = ath9k_iowrite32;
- 	ah->reg_ops.rmw = ath9k_reg_rmw;
- 	pCap = &ah->caps;
diff --git a/package/kernel/mac80211/patches/323-brcmfmac-correct-detection-of-p2pdev-interface-event.patch b/package/kernel/mac80211/patches/323-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
new file mode 100644
index 0000000..868b0a8
--- /dev/null
+++ b/package/kernel/mac80211/patches/323-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
@@ -0,0 +1,105 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:57 +0200
+Subject: [PATCH] brcmfmac: correct detection of p2pdev interface event
+
+The p2pdev interface is setup in firmware resulting in a interface
+event. This event has role and no-if flag. When role is p2p client
+and no-if flag is set it indicates that this is the p2pdev interface.
+This info is used in handling the event and adding interface in the
+driver.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -795,7 +795,7 @@ fail:
+ }
+ 
+ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
+-			      char *name, u8 *mac_addr)
++			      bool is_p2pdev, char *name, u8 *mac_addr)
+ {
+ 	struct brcmf_if *ifp;
+ 	struct net_device *ndev;
+@@ -821,7 +821,7 @@ struct brcmf_if *brcmf_add_if(struct brc
+ 		}
+ 	}
+ 
+-	if (!brcmf_p2p_enable && bssidx == 1) {
++	if (!brcmf_p2p_enable && is_p2pdev) {
+ 		/* this is P2P_DEVICE interface */
+ 		brcmf_dbg(INFO, "allocate non-netdev interface\n");
+ 		ifp = kzalloc(sizeof(*ifp), GFP_KERNEL);
+@@ -999,12 +999,12 @@ int brcmf_bus_start(struct device *dev)
+ 	brcmf_dbg(TRACE, "\n");
+ 
+ 	/* add primary networking interface */
+-	ifp = brcmf_add_if(drvr, 0, 0, "wlan%d", NULL);
++	ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL);
+ 	if (IS_ERR(ifp))
+ 		return PTR_ERR(ifp);
+ 
+ 	if (brcmf_p2p_enable)
+-		p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL);
++		p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL);
+ 	else
+ 		p2p_ifp = NULL;
+ 	if (IS_ERR(p2p_ifp))
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
+@@ -205,7 +205,7 @@ char *brcmf_ifname(struct brcmf_pub *drv
+ struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
+ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
+ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
+-			      char *name, u8 *mac_addr);
++			      bool is_p2pdev, char *name, u8 *mac_addr);
+ void brcmf_remove_interface(struct brcmf_if *ifp);
+ int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
+ void brcmf_txflowblock_if(struct brcmf_if *ifp,
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
+@@ -179,6 +179,7 @@ static void brcmf_fweh_handle_if_event(s
+ {
+ 	struct brcmf_if_event *ifevent = data;
+ 	struct brcmf_if *ifp;
++	bool is_p2pdev;
+ 	int err = 0;
+ 
+ 	brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n",
+@@ -186,18 +187,16 @@ static void brcmf_fweh_handle_if_event(s
+ 		  ifevent->flags, ifevent->role);
+ 
+ 	/* The P2P Device interface event must not be ignored
+-	 * contrary to what firmware tells us. The only way to
+-	 * distinguish the P2P Device is by looking at the ifidx
+-	 * and bssidx received.
++	 * contrary to what firmware tells us.
+ 	 */
+-	if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
+-	    (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
++	is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
++		    ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT;
++	if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
+ 		brcmf_dbg(EVENT, "event can be ignored\n");
+ 		return;
+ 	}
+ 	if (ifevent->ifidx >= BRCMF_MAX_IFS) {
+-		brcmf_err("invalid interface index: %u\n",
+-			  ifevent->ifidx);
++		brcmf_err("invalid interface index: %u\n", ifevent->ifidx);
+ 		return;
+ 	}
+ 
+@@ -207,7 +206,7 @@ static void brcmf_fweh_handle_if_event(s
+ 		brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname,
+ 			  emsg->addr);
+ 		ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx,
+-				   emsg->ifname, emsg->addr);
++				   is_p2pdev, emsg->ifname, emsg->addr);
+ 		if (IS_ERR(ifp))
+ 			return;
+ 		brcmf_fws_add_interface(ifp);
diff --git a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch b/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch
deleted file mode 100644
index 2eda1c9..0000000
--- a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:51 +0100
-Subject: [PATCH] ath9k: add new function ath9k_hw_read_array
-
-REG_READ generate most overhead on usb bus. It send and read micro packages
-and reduce usb bandwidth. To reduce this overhead we should read in batches.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -121,6 +121,36 @@ void ath9k_hw_write_array(struct ath_hw
- 	REGWRITE_BUFFER_FLUSH(ah);
- }
- 
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size)
-+{
-+	u32 *tmp_reg_list, *tmp_data;
-+	int i;
-+
-+	tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+	if (!tmp_reg_list) {
-+		dev_err(ah->dev, "%s: tmp_reg_list: alloc filed\n", __func__);
-+		return;
-+	}
-+
-+	tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+	if (!tmp_data) {
-+		dev_err(ah->dev, "%s tmp_data: alloc filed\n", __func__);
-+		goto error_tmp_data;
-+	}
-+
-+	for (i = 0; i < size; i++)
-+		tmp_reg_list[i] = array[i][0];
-+
-+	REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size);
-+
-+	for (i = 0; i < size; i++)
-+		array[i][1] = tmp_data[i];
-+
-+	kfree(tmp_data);
-+error_tmp_data:
-+	kfree(tmp_reg_list);
-+}
-+
- u32 ath9k_hw_reverse_bits(u32 val, u32 n)
- {
- 	u32 retval;
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -138,6 +138,8 @@
- 
- #define REG_WRITE_ARRAY(iniarray, column, regWr) \
- 	ath9k_hw_write_array(ah, iniarray, column, &(regWr))
-+#define REG_READ_ARRAY(ah, array, size) \
-+	ath9k_hw_read_array(ah, array, size)
- 
- #define AR_GPIO_OUTPUT_MUX_AS_OUTPUT             0
- #define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
-@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw
- bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
- void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
- 			  int column, unsigned int *writecnt);
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size);
- u32 ath9k_hw_reverse_bits(u32 val, u32 n);
- u16 ath9k_hw_computetxtime(struct ath_hw *ah,
- 			   u8 phy, int kbps,
diff --git a/package/kernel/mac80211/patches/324-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch b/package/kernel/mac80211/patches/324-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
new file mode 100644
index 0000000..abd6681
--- /dev/null
+++ b/package/kernel/mac80211/patches/324-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
@@ -0,0 +1,126 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:58 +0200
+Subject: [PATCH] brcmfmac: use brcmf_get_ifp() to map ifidx to struct
+ brcmf_if instance
+
+The knowledge on how to map the interface index to a struct brcmf_if
+instance is in brcmf_get_ifp() so use that function when only the
+interface index is known instead of accessing brcmf_pub::iflist
+directly.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
+@@ -149,7 +149,7 @@ static s32 brcmf_btcoex_params_read(stru
+ static void brcmf_btcoex_boost_wifi(struct brcmf_btcoex_info *btci,
+ 				    bool trump_sco)
+ {
+-	struct brcmf_if *ifp = btci->cfg->pub->iflist[0];
++	struct brcmf_if *ifp = brcmf_get_ifp(btci->cfg->pub, 0);
+ 
+ 	if (trump_sco && !btci->saved_regs_part2) {
+ 		/* this should reduce eSCO agressive
+@@ -468,7 +468,7 @@ int brcmf_btcoex_set_mode(struct brcmf_c
+ {
+ 	struct brcmf_cfg80211_info *cfg = wiphy_priv(vif->wdev.wiphy);
+ 	struct brcmf_btcoex_info *btci = cfg->btcoex;
+-	struct brcmf_if *ifp = cfg->pub->iflist[0];
++	struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
+ 
+ 	switch (mode) {
+ 	case BRCMF_BTCOEX_DISABLED:
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -6213,7 +6213,7 @@ static void brcmf_free_wiphy(struct wiph
+ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
+ 						  struct device *busdev)
+ {
+-	struct net_device *ndev = drvr->iflist[0]->ndev;
++	struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
+ 	struct brcmf_cfg80211_info *cfg;
+ 	struct wiphy *wiphy;
+ 	struct brcmf_cfg80211_vif *vif;
+--- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
+@@ -121,7 +121,7 @@ static void brcmf_feat_iovar_int_set(str
+ 
+ void brcmf_feat_attach(struct brcmf_pub *drvr)
+ {
+-	struct brcmf_if *ifp = drvr->iflist[0];
++	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
+ 
+ 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
+ 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
+--- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
+@@ -221,7 +221,7 @@ static void brcmf_flowring_block(struct
+ 
+ 	bus_if = dev_get_drvdata(flow->dev);
+ 	drvr = bus_if->drvr;
+-	ifp = drvr->iflist[ifidx];
++	ifp = brcmf_get_ifp(drvr, ifidx);
+ 	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FLOW, blocked);
+ 
+ 	spin_unlock_irqrestore(&flow->block_lock, flags);
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
+@@ -334,7 +334,7 @@ void brcmf_fweh_attach(struct brcmf_pub
+ void brcmf_fweh_detach(struct brcmf_pub *drvr)
+ {
+ 	struct brcmf_fweh_info *fweh = &drvr->fweh;
+-	struct brcmf_if *ifp = drvr->iflist[0];
++	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
+ 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
+ 
+ 	if (ifp) {
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+@@ -972,7 +972,7 @@ static void
+ brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
+ 			     u8 if_id)
+ {
+-	struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1];
++	struct brcmf_if *ifp = brcmf_get_ifp(fws->drvr, if_id);
+ 
+ 	if (WARN_ON(!ifp))
+ 		return;
+@@ -2118,6 +2118,7 @@ static int brcmf_debugfs_fws_stats_read(
+ int brcmf_fws_init(struct brcmf_pub *drvr)
+ {
+ 	struct brcmf_fws_info *fws;
++	struct brcmf_if *ifp;
+ 	u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS;
+ 	int rc;
+ 	u32 mode;
+@@ -2177,21 +2178,22 @@ int brcmf_fws_init(struct brcmf_pub *drv
+ 	 * continue. Set mode back to none indicating not enabled.
+ 	 */
+ 	fws->fw_signals = true;
+-	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) {
++	ifp = brcmf_get_ifp(drvr, 0);
++	if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) {
+ 		brcmf_err("failed to set bdcv2 tlv signaling\n");
+ 		fws->fcmode = BRCMF_FWS_FCMODE_NONE;
+ 		fws->fw_signals = false;
+ 	}
+ 
+-	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1))
++	if (brcmf_fil_iovar_int_set(ifp, "ampdu_hostreorder", 1))
+ 		brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n");
+ 
+ 	/* Enable seq number reuse, if supported */
+-	if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) {
++	if (brcmf_fil_iovar_int_get(ifp, "wlfc_mode", &mode) == 0) {
+ 		if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) {
+ 			mode = 0;
+ 			BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1);
+-			if (brcmf_fil_iovar_int_set(drvr->iflist[0],
++			if (brcmf_fil_iovar_int_set(ifp,
+ 						    "wlfc_mode", mode) == 0) {
+ 				BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1);
+ 			}
diff --git a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch b/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch
deleted file mode 100644
index 4e4888f..0000000
--- a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:52 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
-
-insted of reading each register separatly
-and waste 4ms on each operation, we can
-use one shot read.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -440,8 +440,7 @@ static void ar9271_hw_pa_cal(struct ath_
- 		{ AR9285_AN_RF2G3, 0 },
- 	};
- 
--	for (i = 0; i < ARRAY_SIZE(regList); i++)
--		regList[i][1] = REG_READ(ah, regList[i][0]);
-+	REG_READ_ARRAY(ah, regList, ARRAY_SIZE(regList));
- 
- 	ENABLE_REG_RMW_BUFFER(ah);
- 	/* 7834, b1=0 */
diff --git a/package/kernel/mac80211/patches/325-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch b/package/kernel/mac80211/patches/325-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
new file mode 100644
index 0000000..23a7b6f
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
@@ -0,0 +1,122 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:14:59 +0200
+Subject: [PATCH] brcmfmac: pass struct brcmf_if instance in
+ brcmf_txfinalize()
+
+Most call sites of brcmf_txfinalize already have struct brcmf_if
+instance so pass that to brcmf_txfinalize() as the function
+needs it anyway.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -560,17 +560,11 @@ void brcmf_rx_frame(struct device *dev,
+ 		brcmf_netif_rx(ifp, skb);
+ }
+ 
+-void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
+-		      bool success)
++void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
+ {
+-	struct brcmf_if *ifp;
+ 	struct ethhdr *eh;
+ 	u16 type;
+ 
+-	ifp = drvr->iflist[ifidx];
+-	if (!ifp)
+-		goto done;
+-
+ 	eh = (struct ethhdr *)(txp->data);
+ 	type = ntohs(eh->h_proto);
+ 
+@@ -582,7 +576,7 @@ void brcmf_txfinalize(struct brcmf_pub *
+ 
+ 	if (!success)
+ 		ifp->stats.tx_errors++;
+-done:
++
+ 	brcmu_pkt_buf_free_skb(txp);
+ }
+ 
+@@ -600,7 +594,7 @@ void brcmf_txcomplete(struct device *dev
+ 		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
+ 			brcmu_pkt_buf_free_skb(txp);
+ 		else
+-			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
++			brcmf_txfinalize(ifp, txp, success);
+ 	}
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
+@@ -210,8 +210,7 @@ void brcmf_remove_interface(struct brcmf
+ int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
+ void brcmf_txflowblock_if(struct brcmf_if *ifp,
+ 			  enum brcmf_netif_stop_reason reason, bool state);
+-void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
+-		      bool success);
++void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
+ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
+ 
+ /* Sets dongle media info (drv_version, mac address). */
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+@@ -1506,7 +1506,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
+ 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
+ 						    genbit, seq);
+ 	if (remove_from_hanger || ret)
+-		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
++		brcmf_txfinalize(ifp, skb, true);
+ 
+ 	return 0;
+ }
+@@ -1905,7 +1905,7 @@ int brcmf_fws_process_skb(struct brcmf_i
+ 	if (fws->avoid_queueing) {
+ 		rc = brcmf_proto_txdata(drvr, ifp->ifidx, 0, skb);
+ 		if (rc < 0)
+-			brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
++			brcmf_txfinalize(ifp, skb, false);
+ 		return rc;
+ 	}
+ 
+@@ -1929,7 +1929,7 @@ int brcmf_fws_process_skb(struct brcmf_i
+ 		brcmf_fws_schedule_deq(fws);
+ 	} else {
+ 		brcmf_err("drop skb: no hanger slot\n");
+-		brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
++		brcmf_txfinalize(ifp, skb, false);
+ 		rc = -ENOMEM;
+ 	}
+ 	brcmf_fws_unlock(fws);
+@@ -2009,8 +2009,9 @@ static void brcmf_fws_dequeue_worker(str
+ 				ret = brcmf_proto_txdata(drvr, ifidx, 0, skb);
+ 				brcmf_fws_lock(fws);
+ 				if (ret < 0)
+-					brcmf_txfinalize(drvr, skb, ifidx,
+-							 false);
++					brcmf_txfinalize(brcmf_get_ifp(drvr,
++								       ifidx),
++							 skb, false);
+ 				if (fws->bus_flow_blocked)
+ 					break;
+ 			}
+--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+@@ -873,7 +873,11 @@ brcmf_msgbuf_process_txstatus(struct brc
+ 	commonring = msgbuf->flowrings[flowid];
+ 	atomic_dec(&commonring->outstanding_tx);
+ 
+-	brcmf_txfinalize(msgbuf->drvr, skb, tx_status->msg.ifidx, true);
++	/* Hante: i believe this was a bug as tx_status->msg.ifidx was used
++	 * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny?
++	 */
++	brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx),
++			 skb, true);
+ }
+ 
+ 
diff --git a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch b/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch
deleted file mode 100644
index a22cd1d..0000000
--- a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:53 +0100
-Subject: [PATCH] ath9k: use one shot read in ath9k_hw_update_mibstats
-
-this will reduce some overhead on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ani.c
-+++ b/drivers/net/wireless/ath/ath9k/ani.c
-@@ -107,11 +107,21 @@ static const struct ani_cck_level_entry
- static void ath9k_hw_update_mibstats(struct ath_hw *ah,
- 				     struct ath9k_mib_stats *stats)
- {
--	stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
--	stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
--	stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
--	stats->rts_good += REG_READ(ah, AR_RTS_OK);
--	stats->beacons += REG_READ(ah, AR_BEACON_CNT);
-+	u32 addr[5] = {AR_RTS_OK, AR_RTS_FAIL, AR_ACK_FAIL,
-+		       AR_FCS_FAIL, AR_BEACON_CNT};
-+	u32 data[5];
-+
-+	REG_READ_MULTI(ah, &addr[0], &data[0], 5);
-+	/* AR_RTS_OK */
-+	stats->rts_good += data[0];
-+	/* AR_RTS_FAIL */
-+	stats->rts_bad += data[1];
-+	/* AR_ACK_FAIL */
-+	stats->ackrcv_bad += data[2];
-+	/* AR_FCS_FAIL */
-+	stats->fcs_bad += data[3];
-+	/* AR_BEACON_CNT */
-+	stats->beacons += data[4];
- }
- 
- static void ath9k_ani_restart(struct ath_hw *ah)
diff --git a/package/kernel/mac80211/patches/326-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch b/package/kernel/mac80211/patches/326-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
new file mode 100644
index 0000000..8ddc0a6
--- /dev/null
+++ b/package/kernel/mac80211/patches/326-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
@@ -0,0 +1,92 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:15:00 +0200
+Subject: [PATCH] brcmfmac: add mapping for interface index to bsscfg
+ index
+
+Because the P2P Device interface in firmware uses the same interface
+index as the primary interface we use the bsscfg index as index in the
+struct brcmf_pub::iflist. However, in the data path we get the interface
+index and not the bsscfg index. So we need a mapping of interface index
+to bsscfg index, which can be determined upon handle adding the interface.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -85,21 +85,20 @@ char *brcmf_ifname(struct brcmf_pub *drv
+ 
+ struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
+ {
++	struct brcmf_if *ifp;
++	s32 bssidx;
++
+ 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
+ 		brcmf_err("ifidx %d out of range\n", ifidx);
+ 		return NULL;
+ 	}
+ 
+-	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
+-	 * events this is easy because it contains the bssidx which maps
+-	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
+-	 * bssidx 1 is used for p2p0 and no data can be received or
+-	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
+-	 */
+-	if (ifidx)
+-		ifidx++;
++	ifp = NULL;
++	bssidx = drvr->if2bss[ifidx];
++	if (bssidx >= 0)
++		ifp = drvr->iflist[bssidx];
+ 
+-	return drvr->iflist[ifidx];
++	return ifp;
+ }
+ 
+ static void _brcmf_set_multicast_list(struct work_struct *work)
+@@ -831,6 +830,8 @@ struct brcmf_if *brcmf_add_if(struct brc
+ 
+ 		ifp = netdev_priv(ndev);
+ 		ifp->ndev = ndev;
++		/* store mapping ifidx to bssidx */
++		drvr->if2bss[ifidx] = bssidx;
+ 	}
+ 
+ 	ifp->drvr = drvr;
+@@ -855,6 +856,7 @@ static void brcmf_del_if(struct brcmf_pu
+ 	struct brcmf_if *ifp;
+ 
+ 	ifp = drvr->iflist[bssidx];
++	drvr->if2bss[ifp->ifidx] = -1;
+ 	drvr->iflist[bssidx] = NULL;
+ 	if (!ifp) {
+ 		brcmf_err("Null interface, idx=%d\n", bssidx);
+@@ -862,6 +864,7 @@ static void brcmf_del_if(struct brcmf_pu
+ 	}
+ 	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx);
+ 	if (ifp->ndev) {
++		drvr->if2bss[ifp->ifidx] = -1;
+ 		if (bssidx == 0) {
+ 			if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
+ 				rtnl_lock();
+@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev)
+ 	if (!drvr)
+ 		return -ENOMEM;
+ 
++	memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss));
+ 	mutex_init(&drvr->proto_block);
+ 
+ 	/* Link to bus module */
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
+@@ -122,6 +122,7 @@ struct brcmf_pub {
+ 	struct mac_address addresses[BRCMF_MAX_IFS];
+ 
+ 	struct brcmf_if *iflist[BRCMF_MAX_IFS];
++	s32 if2bss[BRCMF_MAX_IFS];
+ 
+ 	struct mutex proto_block;
+ 	unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
diff --git a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch b/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch
deleted file mode 100644
index e5a362f..0000000
--- a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:54 +0100
-Subject: [PATCH] ath9k: ath9k_hw_loadnf: use REG_RMW
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/calib.c
-+++ b/drivers/net/wireless/ath/ath9k/calib.c
-@@ -238,7 +238,6 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- {
- 	struct ath9k_nfcal_hist *h = NULL;
- 	unsigned i, j;
--	int32_t val;
- 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
- 	struct ath_common *common = ath9k_hw_common(ah);
- 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
-@@ -246,6 +245,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	if (ah->caldata)
- 		h = ah->caldata->nfCalHist;
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	for (i = 0; i < NUM_NF_READINGS; i++) {
- 		if (chainmask & (1 << i)) {
- 			s16 nfval;
-@@ -258,10 +258,8 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 			else
- 				nfval = default_nf;
- 
--			val = REG_READ(ah, ah->nf_regs[i]);
--			val &= 0xFFFFFE00;
--			val |= (((u32) nfval << 1) & 0x1ff);
--			REG_WRITE(ah, ah->nf_regs[i], val);
-+			REG_RMW(ah, ah->nf_regs[i],
-+				(((u32) nfval << 1) & 0x1ff), 0x1ff);
- 		}
- 	}
- 
-@@ -274,6 +272,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
- 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
- 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	/*
- 	 * Wait for load to complete, should be fast, a few 10s of us.
-@@ -309,19 +308,17 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- 	 * by the median we just loaded.  This will be initial (and max) value
- 	 * of next noise floor calibration the baseband does.
- 	 */
--	ENABLE_REGWRITE_BUFFER(ah);
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	for (i = 0; i < NUM_NF_READINGS; i++) {
- 		if (chainmask & (1 << i)) {
- 			if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
- 				continue;
- 
--			val = REG_READ(ah, ah->nf_regs[i]);
--			val &= 0xFFFFFE00;
--			val |= (((u32) (-50) << 1) & 0x1ff);
--			REG_WRITE(ah, ah->nf_regs[i], val);
-+			REG_RMW(ah, ah->nf_regs[i],
-+					(((u32) (-50) << 1) & 0x1ff), 0x1ff);
- 		}
- 	}
--	REGWRITE_BUFFER_FLUSH(ah);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	return 0;
- }
diff --git a/package/kernel/mac80211/patches/327-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch b/package/kernel/mac80211/patches/327-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
new file mode 100644
index 0000000..a0a798b
--- /dev/null
+++ b/package/kernel/mac80211/patches/327-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
@@ -0,0 +1,103 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:15:01 +0200
+Subject: [PATCH] brcmfmac: add dedicated debug level for firmware
+ console logging
+
+Both PCIe and SDIO devices have the possibility to log the firmware
+console output in kernel log. For PCIe it is logged when PCIE debug
+level is enabled. For SDIO it is logged when user specifies a non-zero
+console interval through debugfs. This patch tries to make it a
+bit more consistent. The firmware console output is only logged when
+FWCON debug level is enabled.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
+@@ -37,6 +37,7 @@
+ #define BRCMF_SDIO_VAL		0x00020000
+ #define BRCMF_MSGBUF_VAL	0x00040000
+ #define BRCMF_PCIE_VAL		0x00080000
++#define BRCMF_FWCON_VAL		0x00100000
+ 
+ /* set default print format */
+ #undef pr_fmt
+@@ -78,6 +79,7 @@ do {								\
+ #define BRCMF_GLOM_ON()		(brcmf_msg_level & BRCMF_GLOM_VAL)
+ #define BRCMF_EVENT_ON()	(brcmf_msg_level & BRCMF_EVENT_VAL)
+ #define BRCMF_FIL_ON()		(brcmf_msg_level & BRCMF_FIL_VAL)
++#define BRCMF_FWCON_ON()	(brcmf_msg_level & BRCMF_FWCON_VAL)
+ 
+ #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
+ 
+@@ -90,6 +92,7 @@ do {								\
+ #define BRCMF_GLOM_ON()		0
+ #define BRCMF_EVENT_ON()	0
+ #define BRCMF_FIL_ON()		0
++#define BRCMF_FWCON_ON()	0
+ 
+ #endif /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+@@ -644,7 +644,7 @@ static void brcmf_pcie_bus_console_init(
+ 	addr = console->base_addr + BRCMF_CONSOLE_BUFSIZE_OFFSET;
+ 	console->bufsize = brcmf_pcie_read_tcm32(devinfo, addr);
+ 
+-	brcmf_dbg(PCIE, "Console: base %x, buf %x, size %d\n",
++	brcmf_dbg(FWCON, "Console: base %x, buf %x, size %d\n",
+ 		  console->base_addr, console->buf_addr, console->bufsize);
+ }
+ 
+@@ -656,6 +656,9 @@ static void brcmf_pcie_bus_console_read(
+ 	u8 ch;
+ 	u32 newidx;
+ 
++	if (!BRCMF_FWCON_ON())
++		return;
++
+ 	console = &devinfo->shared.console;
+ 	addr = console->base_addr + BRCMF_CONSOLE_WRITEIDX_OFFSET;
+ 	newidx = brcmf_pcie_read_tcm32(devinfo, addr);
+@@ -677,7 +680,7 @@ static void brcmf_pcie_bus_console_read(
+ 		}
+ 		if (ch == '\n') {
+ 			console->log_str[console->log_idx] = 0;
+-			brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
++			pr_debug("CONSOLE: %s", console->log_str);
+ 			console->log_idx = 0;
+ 		}
+ 	}
+--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+@@ -123,6 +123,7 @@ struct rte_console {
+ 
+ #define BRCMF_FIRSTREAD	(1 << 6)
+ 
++#define BRCMF_CONSOLE	10	/* watchdog interval to poll console */
+ 
+ /* SBSDIO_DEVICE_CTL */
+ 
+@@ -3204,6 +3205,8 @@ static void brcmf_sdio_debugfs_create(st
+ 	if (IS_ERR_OR_NULL(dentry))
+ 		return;
+ 
++	bus->console_interval = BRCMF_CONSOLE;
++
+ 	brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
+ 	brcmf_debugfs_add_entry(drvr, "counters",
+ 				brcmf_debugfs_sdio_count_read);
+@@ -3613,7 +3616,7 @@ static void brcmf_sdio_bus_watchdog(stru
+ 	}
+ #ifdef DEBUG
+ 	/* Poll for console output periodically */
+-	if (bus->sdiodev->state == BRCMF_SDIOD_DATA &&
++	if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
+ 	    bus->console_interval != 0) {
+ 		bus->console.count += BRCMF_WD_POLL_MS;
+ 		if (bus->console.count >= bus->console_interval) {
diff --git a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch b/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch
deleted file mode 100644
index 01c8011..0000000
--- a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:55 +0100
-Subject: [PATCH] ath9k: write buffer related optimisation in
- ar5008_hw_set_channel_regs
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -681,12 +681,13 @@ static void ar5008_hw_set_channel_regs(s
- 			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
- 
- 	}
-+	ENABLE_REGWRITE_BUFFER(ah);
- 	REG_WRITE(ah, AR_PHY_TURBO, phymode);
- 
-+	/* This function do only REG_WRITE, so
-+	 * we can include it to REGWRITE_BUFFER. */
- 	ath9k_hw_set11nmac2040(ah, chan);
- 
--	ENABLE_REGWRITE_BUFFER(ah);
--
- 	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
- 	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
- 
diff --git a/package/kernel/mac80211/patches/328-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch b/package/kernel/mac80211/patches/328-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
new file mode 100644
index 0000000..53e7ede
--- /dev/null
+++ b/package/kernel/mac80211/patches/328-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
@@ -0,0 +1,34 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:15:02 +0200
+Subject: [PATCH] brcmfmac: remove ifidx parameter from
+ brcmf_fws_txstatus_suppressed()
+
+The brcmf_fws_txstatus_suppressed() function prototype specifies an
+ifidx parameter which is not used within the function implementation.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+@@ -1398,7 +1398,7 @@ done:
+ }
+ 
+ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
+-					 struct sk_buff *skb, u8 ifidx,
++					 struct sk_buff *skb,
+ 					 u32 genbit, u16 seq)
+ {
+ 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
+@@ -1503,7 +1503,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
+ 		return -EINVAL;
+ 	}
+ 	if (!remove_from_hanger)
+-		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
++		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb,
+ 						    genbit, seq);
+ 	if (remove_from_hanger || ret)
+ 		brcmf_txfinalize(ifp, skb, true);
diff --git a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch b/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch
deleted file mode 100644
index e5219f2..0000000
--- a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:56 +0100
-Subject: [PATCH] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -389,6 +389,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- 		}
- 	}
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
- 		      (numXpdGain - 1) & 0x3);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
-@@ -396,6 +397,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
- 		      xpdGainValues[1]);
- 	REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0);
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
- 		regChainOffset = i * 0x1000;
diff --git a/package/kernel/mac80211/patches/329-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch b/package/kernel/mac80211/patches/329-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
new file mode 100644
index 0000000..bb05235
--- /dev/null
+++ b/package/kernel/mac80211/patches/329-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
@@ -0,0 +1,97 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:15:03 +0200
+Subject: [PATCH] brcmfmac: change prototype for brcmf_fws_hdrpull()
+
+Instead of passing ifidx and drvr just pass struct brcmf_if pointer
+which holds both parameters.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
+@@ -312,8 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
+ 
+ 	skb_pull(pktbuf, BCDC_HEADER_LEN);
+ 	if (do_fws)
+-		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
+-				  pktbuf);
++		brcmf_fws_hdrpull(tmp_if, h->data_offset << 2, pktbuf);
+ 	else
+ 		skb_pull(pktbuf, h->data_offset << 2);
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+@@ -1616,11 +1616,10 @@ static int brcmf_fws_notify_bcmc_credit_
+ 	return 0;
+ }
+ 
+-int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
+-		      struct sk_buff *skb)
++void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb)
+ {
+ 	struct brcmf_skb_reorder_data *rd;
+-	struct brcmf_fws_info *fws = drvr->fws;
++	struct brcmf_fws_info *fws = ifp->drvr->fws;
+ 	u8 *signal_data;
+ 	s16 data_len;
+ 	u8 type;
+@@ -1630,20 +1629,20 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
+ 	s32 err;
+ 
+ 	brcmf_dbg(HDRS, "enter: ifidx %d, skblen %u, sig %d\n",
+-		  ifidx, skb->len, signal_len);
++		  ifp->ifidx, skb->len, siglen);
+ 
+-	WARN_ON(signal_len > skb->len);
++	WARN_ON(siglen > skb->len);
+ 
+-	if (!signal_len)
+-		return 0;
++	if (!siglen)
++		return;
+ 	/* if flow control disabled, skip to packet data and leave */
+ 	if ((!fws) || (!fws->fw_signals)) {
+-		skb_pull(skb, signal_len);
+-		return 0;
++		skb_pull(skb, siglen);
++		return;
+ 	}
+ 
+ 	fws->stats.header_pulls++;
+-	data_len = signal_len;
++	data_len = siglen;
+ 	signal_data = skb->data;
+ 
+ 	status = BRCMF_FWS_RET_OK_NOSCHEDULE;
+@@ -1731,14 +1730,12 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
+ 	/* signalling processing result does
+ 	 * not affect the actual ethernet packet.
+ 	 */
+-	skb_pull(skb, signal_len);
++	skb_pull(skb, siglen);
+ 
+ 	/* this may be a signal-only packet
+ 	 */
+ 	if (skb->len == 0)
+ 		fws->stats.header_only_pkt++;
+-
+-	return 0;
+ }
+ 
+ static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
+--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
+@@ -21,8 +21,7 @@
+ int brcmf_fws_init(struct brcmf_pub *drvr);
+ void brcmf_fws_deinit(struct brcmf_pub *drvr);
+ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
+-int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
+-		      struct sk_buff *skb);
++void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb);
+ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb);
+ 
+ void brcmf_fws_reset_interface(struct brcmf_if *ifp);
diff --git a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch b/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch
deleted file mode 100644
index 6ce3f40..0000000
--- a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:57 +0100
-Subject: [PATCH] ath9k: use rmw buffer in ath9k_hw_set_operating_mode
- and ath9k_hw_reset
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1227,6 +1227,7 @@ static void ath9k_hw_set_operating_mode(
- 	u32 mask = AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC;
- 	u32 set = AR_STA_ID1_KSRCH_MODE;
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	switch (opmode) {
- 	case NL80211_IFTYPE_ADHOC:
- 		if (!AR_SREV_9340_13(ah)) {
-@@ -1248,6 +1249,7 @@ static void ath9k_hw_set_operating_mode(
- 		break;
- 	}
- 	REG_RMW(ah, AR_STA_ID1, set, mask);
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
-@@ -1960,6 +1962,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- 	if (!ath9k_hw_mci_is_enabled(ah))
- 		REG_WRITE(ah, AR_OBS, 8);
- 
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	if (ah->config.rx_intr_mitigation) {
- 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, ah->config.rimt_last);
- 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, ah->config.rimt_first);
-@@ -1969,6 +1972,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- 		REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_LAST, 300);
- 		REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_FIRST, 750);
- 	}
-+	REG_RMW_BUFFER_FLUSH(ah);
- 
- 	ath9k_hw_init_bb(ah, chan);
- 
diff --git a/package/kernel/mac80211/patches/330-brcmfmac-introduce-brcmf_net_detach-function.patch b/package/kernel/mac80211/patches/330-brcmfmac-introduce-brcmf_net_detach-function.patch
new file mode 100644
index 0000000..0651a2f
--- /dev/null
+++ b/package/kernel/mac80211/patches/330-brcmfmac-introduce-brcmf_net_detach-function.patch
@@ -0,0 +1,99 @@
+From: Arend van Spriel <arend@broadcom.com>
+Date: Wed, 26 Aug 2015 22:15:04 +0200
+Subject: [PATCH] brcmfmac: introduce brcmf_net_detach() function
+
+In case of error during brcmf_bus_start() the network interfaces were
+freed using free_netdev(). However, the interfaces may have additional
+memory allocated which is not freed. The netdev has destructor set to
+brcmf_cfg80211_free_netdev() which frees the additional memory if
+allocated and call free_netdev(). The brcmf_net_detach() either calls
+brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when
+struct net_device::reg_state indicates the netdev was registered.
+
+Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+@@ -4747,7 +4747,8 @@ void brcmf_cfg80211_free_netdev(struct n
+ 	ifp = netdev_priv(ndev);
+ 	vif = ifp->vif;
+ 
+-	brcmf_free_vif(vif);
++	if (vif)
++		brcmf_free_vif(vif);
+ 	free_netdev(ndev);
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
+@@ -718,8 +718,6 @@ int brcmf_net_attach(struct brcmf_if *if
+ 	}
+ 
+ 	brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
+-
+-	ndev->destructor = brcmf_cfg80211_free_netdev;
+ 	return 0;
+ 
+ fail:
+@@ -729,6 +727,14 @@ fail:
+ 	return -EBADE;
+ }
+ 
++static void brcmf_net_detach(struct net_device *ndev)
++{
++	if (ndev->reg_state == NETREG_REGISTERED)
++		unregister_netdev(ndev);
++	else
++		brcmf_cfg80211_free_netdev(ndev);
++}
++
+ static int brcmf_net_p2p_open(struct net_device *ndev)
+ {
+ 	brcmf_dbg(TRACE, "Enter\n");
+@@ -805,8 +811,7 @@ struct brcmf_if *brcmf_add_if(struct brc
+ 			  ifp->ndev->name);
+ 		if (ifidx) {
+ 			netif_stop_queue(ifp->ndev);
+-			unregister_netdev(ifp->ndev);
+-			free_netdev(ifp->ndev);
++			brcmf_net_detach(ifp->ndev);
+ 			drvr->iflist[bssidx] = NULL;
+ 		} else {
+ 			brcmf_err("ignore IF event\n");
+@@ -828,6 +833,7 @@ struct brcmf_if *brcmf_add_if(struct brc
+ 		if (!ndev)
+ 			return ERR_PTR(-ENOMEM);
+ 
++		ndev->destructor = brcmf_cfg80211_free_netdev;
+ 		ifp = netdev_priv(ndev);
+ 		ifp->ndev = ndev;
+ 		/* store mapping ifidx to bssidx */
+@@ -879,8 +885,7 @@ static void brcmf_del_if(struct brcmf_pu
+ 			cancel_work_sync(&ifp->setmacaddr_work);
+ 			cancel_work_sync(&ifp->multicast_work);
+ 		}
+-		/* unregister will take care of freeing it */
+-		unregister_netdev(ifp->ndev);
++		brcmf_net_detach(ifp->ndev);
+ 	}
+ }
+ 
+@@ -1056,11 +1061,11 @@ fail:
+ 			brcmf_fws_deinit(drvr);
+ 		}
+ 		if (drvr->iflist[0]) {
+-			free_netdev(ifp->ndev);
++			brcmf_net_detach(ifp->ndev);
+ 			drvr->iflist[0] = NULL;
+ 		}
+ 		if (p2p_ifp) {
+-			free_netdev(p2p_ifp->ndev);
++			brcmf_net_detach(p2p_ifp->ndev);
+ 			drvr->iflist[1] = NULL;
+ 		}
+ 		return ret;
diff --git a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch b/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch
deleted file mode 100644
index edd6160..0000000
--- a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:58 +0100
-Subject: [PATCH] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -1082,6 +1082,7 @@ static void ath9k_hw_4k_set_board_values
- 		mask = BIT(0)|BIT(5)|BIT(10)|BIT(15)|BIT(20)|BIT(25);
- 		pwrctrl = mask * bb_desired_scale;
- 		clr = mask * 0x1f;
-+		ENABLE_REG_RMW_BUFFER(ah);
- 		REG_RMW(ah, AR_PHY_TX_PWRCTRL8, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_TX_PWRCTRL10, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL12, pwrctrl, clr);
-@@ -1096,6 +1097,7 @@ static void ath9k_hw_4k_set_board_values
- 		clr = mask * 0x1f;
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL11, pwrctrl, clr);
- 		REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL13, pwrctrl, clr);
-+		REG_RMW_BUFFER_FLUSH(ah);
- 	}
- }
- 
diff --git a/package/kernel/mac80211/patches/331-brcmfmac-Reset-PCIE-devices-after-recognition.patch b/package/kernel/mac80211/patches/331-brcmfmac-Reset-PCIE-devices-after-recognition.patch
new file mode 100644
index 0000000..5a7e447
--- /dev/null
+++ b/package/kernel/mac80211/patches/331-brcmfmac-Reset-PCIE-devices-after-recognition.patch
@@ -0,0 +1,193 @@
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Thu, 27 Aug 2015 16:14:06 +0200
+Subject: [PATCH] brcmfmac: Reset PCIE devices after recognition.
+
+When PCIE type devices are being FW reloaded without being properly
+reset then the device ends up in a locked state, requiring the
+device to be completely powered down. This patch adds a reset
+through watchdog at the moment the device (cores) has been
+recognized. This will solve warm reboot issues.
+
+Cc: Rafal Milecki <zajec5@gmail.com>
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+---
+
+--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+@@ -101,6 +101,9 @@
+ /* ARM Cortex M3 core, ID 0x82a */
+ #define BCM4329_CORE_ARM_BASE		0x18002000
+ 
++/* Max possibly supported memory size (limited by IO mapped memory) */
++#define BRCMF_CHIP_MAX_MEMSIZE		(4 * 1024 * 1024)
++
+ #define CORE_SB(base, field) \
+ 		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
+ #define	SBCOREREV(sbidh) \
+@@ -687,6 +690,12 @@ static int brcmf_chip_get_raminfo(struct
+ 		brcmf_err("RAM size is undetermined\n");
+ 		return -ENOMEM;
+ 	}
++
++	if (ci->pub.ramsize > BRCMF_CHIP_MAX_MEMSIZE) {
++		brcmf_err("RAM size is incorrect\n");
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -899,6 +908,15 @@ static int brcmf_chip_recognition(struct
+ 
+ 	/* assure chip is passive for core access */
+ 	brcmf_chip_set_passive(&ci->pub);
++
++	/* Call bus specific reset function now. Cores have been determined
++	 * but further access may require a chip specific reset at this point.
++	 */
++	if (ci->ops->reset) {
++		ci->ops->reset(ci->ctx, &ci->pub);
++		brcmf_chip_set_passive(&ci->pub);
++	}
++
+ 	return brcmf_chip_get_raminfo(ci);
+ }
+ 
+--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
++++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
+@@ -73,6 +73,7 @@ struct brcmf_buscore_ops {
+ 	u32 (*read32)(void *ctx, u32 addr);
+ 	void (*write32)(void *ctx, u32 addr, u32 value);
+ 	int (*prepare)(void *ctx);
++	int (*reset)(void *ctx, struct brcmf_chip *chip);
+ 	int (*setup)(void *ctx, struct brcmf_chip *chip);
+ 	void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
+ };
+--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+@@ -74,6 +74,8 @@ enum brcmf_pcie_state {
+ #define BRCMF_PCIE_REG_INTMASK			0x94
+ #define BRCMF_PCIE_REG_SBMBX			0x98
+ 
++#define BRCMF_PCIE_REG_LINK_STATUS_CTRL		0xBC
++
+ #define BRCMF_PCIE_PCIE2REG_INTMASK		0x24
+ #define BRCMF_PCIE_PCIE2REG_MAILBOXINT		0x48
+ #define BRCMF_PCIE_PCIE2REG_MAILBOXMASK		0x4C
+@@ -466,6 +468,7 @@ brcmf_pcie_select_core(struct brcmf_pcie
+ 
+ static void brcmf_pcie_reset_device(struct brcmf_pciedev_info *devinfo)
+ {
++	struct brcmf_core *core;
+ 	u16 cfg_offset[] = { BRCMF_PCIE_CFGREG_STATUS_CMD,
+ 			     BRCMF_PCIE_CFGREG_PM_CSR,
+ 			     BRCMF_PCIE_CFGREG_MSI_CAP,
+@@ -484,32 +487,38 @@ static void brcmf_pcie_reset_device(stru
+ 	if (!devinfo->ci)
+ 		return;
+ 
++	/* Disable ASPM */
+ 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+-	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
+-			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
+-	lsc = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA);
++	pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
++			      &lsc);
+ 	val = lsc & (~BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB);
+-	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, val);
++	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
++			       val);
+ 
++	/* Watchdog reset */
+ 	brcmf_pcie_select_core(devinfo, BCMA_CORE_CHIPCOMMON);
+ 	WRITECC32(devinfo, watchdog, 4);
+ 	msleep(100);
+ 
++	/* Restore ASPM */
+ 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+-	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
+-			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
+-	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, lsc);
++	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
++			       lsc);
+ 
+-	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+-	for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
+-		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
+-				       cfg_offset[i]);
+-		val = brcmf_pcie_read_reg32(devinfo,
+-					    BRCMF_PCIE_PCIE2REG_CONFIGDATA);
+-		brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
+-			  cfg_offset[i], val);
+-		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA,
+-				       val);
++	core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
++	if (core->rev <= 13) {
++		for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
++			brcmf_pcie_write_reg32(devinfo,
++					       BRCMF_PCIE_PCIE2REG_CONFIGADDR,
++					       cfg_offset[i]);
++			val = brcmf_pcie_read_reg32(devinfo,
++				BRCMF_PCIE_PCIE2REG_CONFIGDATA);
++			brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
++				  cfg_offset[i], val);
++			brcmf_pcie_write_reg32(devinfo,
++					       BRCMF_PCIE_PCIE2REG_CONFIGDATA,
++					       val);
++		}
+ 	}
+ }
+ 
+@@ -519,8 +528,6 @@ static void brcmf_pcie_attach(struct brc
+ 	u32 config;
+ 
+ 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+-	if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0)
+-		brcmf_pcie_reset_device(devinfo);
+ 	/* BAR1 window may not be sized properly */
+ 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+ 	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, 0x4e0);
+@@ -1636,6 +1643,23 @@ static int brcmf_pcie_buscoreprep(void *
+ }
+ 
+ 
++static int brcmf_pcie_buscore_reset(void *ctx, struct brcmf_chip *chip)
++{
++	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
++	u32 val;
++
++	devinfo->ci = chip;
++	brcmf_pcie_reset_device(devinfo);
++
++	val = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
++	if (val != 0xffffffff)
++		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
++				       val);
++
++	return 0;
++}
++
++
+ static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
+ 					u32 rstvec)
+ {
+@@ -1647,6 +1671,7 @@ static void brcmf_pcie_buscore_activate(
+ 
+ static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
+ 	.prepare = brcmf_pcie_buscoreprep,
++	.reset = brcmf_pcie_buscore_reset,
+ 	.activate = brcmf_pcie_buscore_activate,
+ 	.read32 = brcmf_pcie_buscore_read32,
+ 	.write32 = brcmf_pcie_buscore_write32,
+@@ -1814,7 +1839,6 @@ brcmf_pcie_remove(struct pci_dev *pdev)
+ 		brcmf_pcie_intr_disable(devinfo);
+ 
+ 	brcmf_detach(&pdev->dev);
+-	brcmf_pcie_reset_device(devinfo);
+ 
+ 	kfree(bus->bus_priv.pcie);
+ 	kfree(bus->msgbuf->flowrings);
diff --git a/package/kernel/mac80211/patches/332-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch b/package/kernel/mac80211/patches/332-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
new file mode 100644
index 0000000..52b7fa9
--- /dev/null
+++ b/package/kernel/mac80211/patches/332-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
@@ -0,0 +1,33 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 13 Sep 2015 22:26:10 +0200
+Subject: [PATCH] ath10k: fix DMA related firmware crashes on multiple devices
+
+Some platforms really don't like DMA bursts of 256 bytes, and this
+causes the firmware to crash when sending beacons.
+Also, changing this based on the firmware version does not seem to make
+much sense, so use 128 bytes for all versions.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/hw.h
++++ b/drivers/net/wireless/ath/ath10k/hw.h
+@@ -340,7 +340,7 @@ enum ath10k_hw_rate_cck {
+ #define TARGET_10X_MAX_FRAG_ENTRIES		0
+ 
+ /* 10.2 parameters */
+-#define TARGET_10_2_DMA_BURST_SIZE		1
++#define TARGET_10_2_DMA_BURST_SIZE		0
+ 
+ /* Target specific defines for WMI-TLV firmware */
+ #define TARGET_TLV_NUM_VDEVS			4
+@@ -397,7 +397,7 @@ enum ath10k_hw_rate_cck {
+ 
+ #define TARGET_10_4_TX_DBG_LOG_SIZE		1024
+ #define TARGET_10_4_NUM_WDS_ENTRIES		32
+-#define TARGET_10_4_DMA_BURST_SIZE		1
++#define TARGET_10_4_DMA_BURST_SIZE		0
+ #define TARGET_10_4_MAC_AGGR_DELIM		0
+ #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+ #define TARGET_10_4_VOW_CONFIG			0
diff --git a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch b/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch
deleted file mode 100644
index 3ce4428..0000000
--- a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:59 +0100
-Subject: [PATCH] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW
-
-use REG_RMW in ath9k_hw_analog_shift_rmw.
-It will double execution speed on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
-@@ -27,12 +27,7 @@ void ath9k_hw_analog_shift_regwrite(stru
- void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
- 			       u32 shift, u32 val)
- {
--	u32 regVal;
--
--	regVal = REG_READ(ah, reg) & ~mask;
--	regVal |= (val << shift) & mask;
--
--	REG_WRITE(ah, reg, regVal);
-+	REG_RMW(ah, reg, ((val << shift) & mask), mask);
- 
- 	if (ah->config.analog_shiftreg)
- 		udelay(100);
diff --git a/package/kernel/mac80211/patches/333-ath9k-enable-hw-manual-peak-calibration-for-QCA9561.patch b/package/kernel/mac80211/patches/333-ath9k-enable-hw-manual-peak-calibration-for-QCA9561.patch
new file mode 100644
index 0000000..faf6cdc
--- /dev/null
+++ b/package/kernel/mac80211/patches/333-ath9k-enable-hw-manual-peak-calibration-for-QCA9561.patch
@@ -0,0 +1,33 @@
+From: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+Date: Tue, 1 Sep 2015 10:56:09 +0800
+Subject: [PATCH] ath9k: enable hw manual peak calibration for QCA9561
+
+This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
+2015-August/034979.html. As the peak detect calibration is set
+incorrectly.
+
+Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+@@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(st
+ 		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
+ 			      AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
+ 
+-	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
++	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
++	    AR_SREV_9561(ah)) {
+ 		if (is_2g)
+ 			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
+ 				      AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
+@@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struc
+ 
+ skip_tx_iqcal:
+ 	if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
+-		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
++		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
++		    AR_SREV_9561(ah)) {
+ 			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+ 				if (!(ah->rxchainmask & (1 << i)))
+ 					continue;
diff --git a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch b/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch
deleted file mode 100644
index 8f12b36..0000000
--- a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:01 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_4k_set_gain
-
-it is possible to reduce time needed for this function
-by rplacing REG_WRITE with REG_RMW (plus dummy 0) and putt all commands
-in same buffer.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -772,15 +772,14 @@ static void ath9k_hw_4k_set_gain(struct
- 				 struct ar5416_eeprom_4k *eep,
- 				 u8 txRxAttenLocal)
- {
--	REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0,
--		  pModal->antCtrlChain[0]);
--
--	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0),
--		  (REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
--		   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
--		     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
--		  SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
--		  SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
-+	ENABLE_REG_RMW_BUFFER(ah);
-+	REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0,
-+		pModal->antCtrlChain[0], 0);
-+
-+	REG_RMW(ah, AR_PHY_TIMING_CTRL4(0),
-+		SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
-+		SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF),
-+		AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF);
- 
- 	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- 	    AR5416_EEP_MINOR_VER_3) {
-@@ -819,6 +818,7 @@ static void ath9k_hw_4k_set_gain(struct
- 		      AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
- 	REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000,
- 		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- /*
diff --git a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch b/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch
deleted file mode 100644
index f26e059..0000000
--- a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:03 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_def_set_gain
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
-@@ -466,6 +466,7 @@ static void ath9k_hw_def_set_gain(struct
- 				  struct ar5416_eeprom_def *eep,
- 				  u8 txRxAttenLocal, int regChainOffset, int i)
- {
-+	ENABLE_REG_RMW_BUFFER(ah);
- 	if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
- 		txRxAttenLocal = pModal->txRxAttenCh[i];
- 
-@@ -483,16 +484,12 @@ static void ath9k_hw_def_set_gain(struct
- 			      AR_PHY_GAIN_2GHZ_XATTEN2_DB,
- 			      pModal->xatten2Db[i]);
- 		} else {
--			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
--			  | SM(pModal-> bswMargin[i],
--			       AR_PHY_GAIN_2GHZ_BSW_MARGIN));
--			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
--			  | SM(pModal->bswAtten[i],
--			       AR_PHY_GAIN_2GHZ_BSW_ATTEN));
-+			REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+				SM(pModal-> bswMargin[i], AR_PHY_GAIN_2GHZ_BSW_MARGIN),
-+				AR_PHY_GAIN_2GHZ_BSW_MARGIN);
-+			REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+				SM(pModal->bswAtten[i], AR_PHY_GAIN_2GHZ_BSW_ATTEN),
-+				AR_PHY_GAIN_2GHZ_BSW_ATTEN);
- 		}
- 	}
- 
-@@ -504,17 +501,14 @@ static void ath9k_hw_def_set_gain(struct
- 		      AR_PHY_RXGAIN + regChainOffset,
- 		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
- 	} else {
--		REG_WRITE(ah,
--			  AR_PHY_RXGAIN + regChainOffset,
--			  (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
--			   ~AR_PHY_RXGAIN_TXRX_ATTEN)
--			  | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
--		REG_WRITE(ah,
--			  AR_PHY_GAIN_2GHZ + regChainOffset,
--			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
--			   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
--			  SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
-+		REG_RMW(ah, AR_PHY_RXGAIN + regChainOffset,
-+			SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN),
-+			AR_PHY_RXGAIN_TXRX_ATTEN);
-+		REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+			SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN),
-+			AR_PHY_GAIN_2GHZ_RXTX_MARGIN);
- 	}
-+	REG_RMW_BUFFER_FLUSH(ah);
- }
- 
- static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
diff --git a/package/kernel/mac80211/patches/334-mac80211-fix-tx-sequence-number-assignment-with-soft.patch b/package/kernel/mac80211/patches/334-mac80211-fix-tx-sequence-number-assignment-with-soft.patch
new file mode 100644
index 0000000..b19e7ee
--- /dev/null
+++ b/package/kernel/mac80211/patches/334-mac80211-fix-tx-sequence-number-assignment-with-soft.patch
@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 24 Sep 2015 14:10:07 +0200
+Subject: [PATCH] mac80211: fix tx sequence number assignment with software
+ queue + fast-xmit
+
+When using software queueing, tx sequence number assignment happens at
+ieee80211_tx_dequeue time, so the fast-xmit codepath must not do that.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -2766,7 +2766,8 @@ static bool ieee80211_xmit_fast(struct i
+ 
+ 	if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) {
+ 		*ieee80211_get_qos_ctl(hdr) = tid;
+-		hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid);
++		if (!sta->sta.txq[0])
++			hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid);
+ 	} else {
+ 		info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+ 		hdr->seq_ctrl = cpu_to_le16(sdata->sequence_number);
diff --git a/package/kernel/mac80211/patches/335-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch b/package/kernel/mac80211/patches/335-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch
deleted file mode 100644
index 5e63a80..0000000
--- a/package/kernel/mac80211/patches/335-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:38 +0100
-Subject: [PATCH] brcmfmac: Fix oops when SDIO device is removed.
-
-On removal of SDIO card both functions of card will be getting
-a remove call. When the first is hanging in ctrl frame xmit then
-the second will cause oops. This patch fixes the xmit ctrl
-handling in case of serious errors and also limits the handling
-for remove to function 1 only.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1194,7 +1194,7 @@ static void brcmf_ops_sdio_remove(struct
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function: %d\n", func->num);
- 
--	if (func->num != 1 && func->num != 2)
-+	if (func->num != 1)
- 		return;
- 
- 	bus_if = dev_get_drvdata(&func->dev);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2740,6 +2740,11 @@ static void brcmf_sdio_dpc(struct brcmf_
- 	if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
- 		brcmf_err("failed backplane access over SDIO, halting operation\n");
- 		atomic_set(&bus->intstatus, 0);
-+		if (bus->ctrl_frame_stat) {
-+			bus->ctrl_frame_err = -ENODEV;
-+			bus->ctrl_frame_stat = false;
-+			brcmf_sdio_wait_event_wakeup(bus);
-+		}
- 	} else if (atomic_read(&bus->intstatus) ||
- 		   atomic_read(&bus->ipend) > 0 ||
- 		   (!atomic_read(&bus->fcstate) &&
diff --git a/package/kernel/mac80211/patches/335-mac80211-fix-handling-of-PS-filtering-with-fast-xmit.patch b/package/kernel/mac80211/patches/335-mac80211-fix-handling-of-PS-filtering-with-fast-xmit.patch
new file mode 100644
index 0000000..7aef205
--- /dev/null
+++ b/package/kernel/mac80211/patches/335-mac80211-fix-handling-of-PS-filtering-with-fast-xmit.patch
@@ -0,0 +1,45 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 24 Sep 2015 14:11:40 +0200
+Subject: [PATCH] mac80211: fix handling of PS filtering with fast-xmit
+
+Fixes dropped packets in the tx path in case a non-PS station triggers
+the tx filter.
+
+Cc: stable@vger.kernel.org # 4.2
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/status.c
++++ b/net/mac80211/status.c
+@@ -101,6 +101,7 @@ static void ieee80211_handle_filtered_fr
+ 	 * when it wakes up for the next time.
+ 	 */
+ 	set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT);
++	ieee80211_clear_fast_xmit(sta);
+ 
+ 	/*
+ 	 * This code races in the following way:
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1217,8 +1217,10 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 
+ 	if (!tx->sta)
+ 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+-	else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT))
++	else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) {
+ 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
++		ieee80211_check_fast_xmit(tx->sta);
++	}
+ 
+ 	info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT;
+ 
+@@ -2450,7 +2452,8 @@ void ieee80211_check_fast_xmit(struct st
+ 
+ 	if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
+ 	    test_sta_flag(sta, WLAN_STA_PS_DRIVER) ||
+-	    test_sta_flag(sta, WLAN_STA_PS_DELIVER))
++	    test_sta_flag(sta, WLAN_STA_PS_DELIVER) ||
++	    test_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT))
+ 		goto out;
+ 
+ 	if (sdata->noack_map)
diff --git a/package/kernel/mac80211/patches/336-ath9k-declare-required-extra-tx-headroom.patch b/package/kernel/mac80211/patches/336-ath9k-declare-required-extra-tx-headroom.patch
new file mode 100644
index 0000000..4d88591
--- /dev/null
+++ b/package/kernel/mac80211/patches/336-ath9k-declare-required-extra-tx-headroom.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 24 Sep 2015 16:57:37 +0200
+Subject: [PATCH] ath9k: declare required extra tx headroom
+
+ath9k inserts padding between the 802.11 header and the data area (to
+align it). Since it didn't declare this extra required headroom, this
+led to some nasty issues like randomly dropped packets in some setups.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -875,6 +875,7 @@ static void ath9k_set_hw_capab(struct at
+ 	hw->max_rate_tries = 10;
+ 	hw->sta_data_size = sizeof(struct ath_node);
+ 	hw->vif_data_size = sizeof(struct ath_vif);
++	hw->extra_tx_headroom = 4;
+ 
+ 	hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
+ 	hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
diff --git a/package/kernel/mac80211/patches/336-brcmfmac-Simplify-watchdog-sleep.patch b/package/kernel/mac80211/patches/336-brcmfmac-Simplify-watchdog-sleep.patch
deleted file mode 100644
index 201da75..0000000
--- a/package/kernel/mac80211/patches/336-brcmfmac-Simplify-watchdog-sleep.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:39 +0100
-Subject: [PATCH] brcmfmac: Simplify watchdog sleep.
-
-The watchdog thread is used to put the SDIO bus to sleep when the
-system is idling. This patch simplifies the way it is determined
-when sleep can be entered.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -485,10 +485,9 @@ struct brcmf_sdio {
- #endif				/* DEBUG */
- 
- 	uint clkstate;		/* State of sd and backplane clock(s) */
--	bool activity;		/* Activity flag for clock down */
- 	s32 idletime;		/* Control for activity timeout */
--	s32 idlecount;	/* Activity timeout counter */
--	s32 idleclock;	/* How to set bus driver when idle */
-+	s32 idlecount;		/* Activity timeout counter */
-+	s32 idleclock;		/* How to set bus driver when idle */
- 	bool rxflow_mode;	/* Rx flow control mode */
- 	bool rxflow;		/* Is rx flow control on */
- 	bool alp_only;		/* Don't use HT clock (ALP only) */
-@@ -511,6 +510,7 @@ struct brcmf_sdio {
- 	struct workqueue_struct *brcmf_wq;
- 	struct work_struct datawork;
- 	atomic_t dpc_tskcnt;
-+	atomic_t dpc_running;
- 
- 	bool txoff;		/* Transmit flow-controlled */
- 	struct brcmf_sdio_count sdcnt;
-@@ -959,13 +959,8 @@ static int brcmf_sdio_clkctl(struct brcm
- 	brcmf_dbg(SDIO, "Enter\n");
- 
- 	/* Early exit if we're already there */
--	if (bus->clkstate == target) {
--		if (target == CLK_AVAIL) {
--			brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--			bus->activity = true;
--		}
-+	if (bus->clkstate == target)
- 		return 0;
--	}
- 
- 	switch (target) {
- 	case CLK_AVAIL:
-@@ -975,7 +970,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 		/* Now request HT Avail on the backplane */
- 		brcmf_sdio_htclk(bus, true, pendok);
- 		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--		bus->activity = true;
- 		break;
- 
- 	case CLK_SDONLY:
-@@ -1024,17 +1018,6 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
- 
- 		/* Going to sleep */
- 		if (sleep) {
--			/* Don't sleep if something is pending */
--			if (atomic_read(&bus->intstatus) ||
--			    atomic_read(&bus->ipend) > 0 ||
--			    bus->ctrl_frame_stat ||
--			    (!atomic_read(&bus->fcstate) &&
--			    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
--			    data_ok(bus))) {
--				 err = -EBUSY;
--				 goto done;
--			}
--
- 			clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
- 						   SBSDIO_FUNC1_CHIPCLKCSR,
- 						   &err);
-@@ -1045,11 +1028,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
- 						  SBSDIO_ALP_AVAIL_REQ, &err);
- 			}
- 			err = brcmf_sdio_kso_control(bus, false);
--			/* disable watchdog */
--			if (!err)
--				brcmf_sdio_wd_timer(bus, 0);
- 		} else {
--			bus->idlecount = 0;
- 			err = brcmf_sdio_kso_control(bus, true);
- 		}
- 		if (err) {
-@@ -3566,7 +3545,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 	queue_work(bus->brcmf_wq, &bus->datawork);
- }
- 
--static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
-+static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
- {
- 	brcmf_dbg(TIMER, "Enter\n");
- 
-@@ -3627,22 +3606,21 @@ static bool brcmf_sdio_bus_watchdog(stru
- #endif				/* DEBUG */
- 
- 	/* On idle timeout clear activity flag and/or turn off clock */
--	if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
--		if (++bus->idlecount >= bus->idletime) {
-+	if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
-+	    (atomic_read(&bus->dpc_running) == 0) &&
-+	    (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
-+		bus->idlecount++;
-+		if (bus->idlecount > bus->idletime) {
-+			brcmf_dbg(SDIO, "idle\n");
-+			sdio_claim_host(bus->sdiodev->func[1]);
-+			brcmf_sdio_wd_timer(bus, 0);
- 			bus->idlecount = 0;
--			if (bus->activity) {
--				bus->activity = false;
--				brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
--			} else {
--				brcmf_dbg(SDIO, "idle\n");
--				sdio_claim_host(bus->sdiodev->func[1]);
--				brcmf_sdio_bus_sleep(bus, true, false);
--				sdio_release_host(bus->sdiodev->func[1]);
--			}
-+			brcmf_sdio_bus_sleep(bus, true, false);
-+			sdio_release_host(bus->sdiodev->func[1]);
- 		}
-+	} else {
-+		bus->idlecount = 0;
- 	}
--
--	return (atomic_read(&bus->ipend) > 0);
- }
- 
- static void brcmf_sdio_dataworker(struct work_struct *work)
-@@ -3651,8 +3629,11 @@ static void brcmf_sdio_dataworker(struct
- 					      datawork);
- 
- 	while (atomic_read(&bus->dpc_tskcnt)) {
-+		atomic_set(&bus->dpc_running, 1);
- 		atomic_set(&bus->dpc_tskcnt, 0);
- 		brcmf_sdio_dpc(bus);
-+		bus->idlecount = 0;
-+		atomic_set(&bus->dpc_running, 0);
- 	}
- 	if (brcmf_sdiod_freezing(bus->sdiodev)) {
- 		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
-@@ -4154,6 +4135,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 	}
- 	/* Initialize DPC thread */
- 	atomic_set(&bus->dpc_tskcnt, 0);
-+	atomic_set(&bus->dpc_running, 0);
- 
- 	/* Assign bus interface call back */
- 	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
diff --git a/package/kernel/mac80211/patches/337-brcmfmac-Fix-possible-race-condition.patch b/package/kernel/mac80211/patches/337-brcmfmac-Fix-possible-race-condition.patch
deleted file mode 100644
index 3a2de7a..0000000
--- a/package/kernel/mac80211/patches/337-brcmfmac-Fix-possible-race-condition.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:40 +0100
-Subject: [PATCH] brcmfmac: Fix possible race-condition.
-
-SDIO is using a "shared" variable to handoff ctl frames to DPC
-and to see when they are done. In a timeout situation this can
-lead to erroneous situation where DPC started to handle the ctl
-frame while the timeout expired. This patch will fix this by
-adding locking around the shared variable.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2700,11 +2700,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
- 	    data_ok(bus)) {
- 		sdio_claim_host(bus->sdiodev->func[1]);
--		err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
--					      bus->ctrl_frame_len);
-+		if (bus->ctrl_frame_stat) {
-+			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
-+						      bus->ctrl_frame_len);
-+			bus->ctrl_frame_err = err;
-+			bus->ctrl_frame_stat = false;
-+		}
- 		sdio_release_host(bus->sdiodev->func[1]);
--		bus->ctrl_frame_err = err;
--		bus->ctrl_frame_stat = false;
- 		brcmf_sdio_wait_event_wakeup(bus);
- 	}
- 	/* Send queued frames (limit 1 if rx may still be pending) */
-@@ -2720,9 +2722,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- 		brcmf_err("failed backplane access over SDIO, halting operation\n");
- 		atomic_set(&bus->intstatus, 0);
- 		if (bus->ctrl_frame_stat) {
--			bus->ctrl_frame_err = -ENODEV;
--			bus->ctrl_frame_stat = false;
--			brcmf_sdio_wait_event_wakeup(bus);
-+			sdio_claim_host(bus->sdiodev->func[1]);
-+			if (bus->ctrl_frame_stat) {
-+				bus->ctrl_frame_err = -ENODEV;
-+				bus->ctrl_frame_stat = false;
-+				brcmf_sdio_wait_event_wakeup(bus);
-+			}
-+			sdio_release_host(bus->sdiodev->func[1]);
- 		}
- 	} else if (atomic_read(&bus->intstatus) ||
- 		   atomic_read(&bus->ipend) > 0 ||
-@@ -2930,15 +2936,20 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	brcmf_sdio_trigger_dpc(bus);
- 	wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
- 					 msecs_to_jiffies(CTL_DONE_TIMEOUT));
--
--	if (!bus->ctrl_frame_stat) {
-+	ret = 0;
-+	if (bus->ctrl_frame_stat) {
-+		sdio_claim_host(bus->sdiodev->func[1]);
-+		if (bus->ctrl_frame_stat) {
-+			brcmf_dbg(SDIO, "ctrl_frame timeout\n");
-+			bus->ctrl_frame_stat = false;
-+			ret = -ETIMEDOUT;
-+		}
-+		sdio_release_host(bus->sdiodev->func[1]);
-+	}
-+	if (!ret) {
- 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- 			  bus->ctrl_frame_err);
- 		ret = bus->ctrl_frame_err;
--	} else {
--		brcmf_dbg(SDIO, "ctrl_frame timeout\n");
--		bus->ctrl_frame_stat = false;
--		ret = -ETIMEDOUT;
- 	}
- 
- 	if (ret)
diff --git a/package/kernel/mac80211/patches/337-nl80211-put-current-TX-power-in-interface-info.patch b/package/kernel/mac80211/patches/337-nl80211-put-current-TX-power-in-interface-info.patch
new file mode 100644
index 0000000..df2cc4b
--- /dev/null
+++ b/package/kernel/mac80211/patches/337-nl80211-put-current-TX-power-in-interface-info.patch
@@ -0,0 +1,37 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 31 Aug 2015 22:59:38 +0200
+Subject: [PATCH] nl80211: put current TX power in interface info
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Many drivers implement reading current TX power (using either cfg80211
+or ieee80211 op) but userspace can't get it using nl80211. Right now the
+only way to access it is to call some wext ioctl.
+Let's put TX power in interface info reply (callback is wdev specific)
+just like we do with current channel.
+To be consistent (e.g. NL80211_CMD_SET_WIPHY) let's use mBm as na unit.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -2406,6 +2406,16 @@ static int nl80211_send_iface(struct sk_
+ 		}
+ 	}
+ 
++	if (rdev->ops->get_tx_power) {
++		int dbm, ret;
++
++		ret = rdev_get_tx_power(rdev, wdev, &dbm);
++		if (ret == 0 &&
++		    nla_put_u32(msg, NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
++				DBM_TO_MBM(dbm)))
++			goto nla_put_failure;
++	}
++
+ 	if (wdev->ssid_len) {
+ 		if (nla_put(msg, NL80211_ATTR_SSID, wdev->ssid_len, wdev->ssid))
+ 			goto nla_put_failure;
diff --git a/package/kernel/mac80211/patches/338-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch b/package/kernel/mac80211/patches/338-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch
deleted file mode 100644
index c9eb900..0000000
--- a/package/kernel/mac80211/patches/338-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Syed Asifful Dayyan <syedd@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:42 +0100
-Subject: [PATCH] brcmfmac: Add support for BCM4345 SDIO chipset.
-
-These changes add support for BCM4345 SDIO chipset.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1096,6 +1096,7 @@ static const struct sdio_device_id brcmf
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- 	{ /* end: all zeroes */ }
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -491,6 +491,10 @@ static void brcmf_chip_get_raminfo(struc
- 	case BRCM_CC_43362_CHIP_ID:
- 		ci->pub.ramsize = 0x3c000;
- 		break;
-+	case BRCM_CC_4345_CHIP_ID:
-+		ci->pub.ramsize = 0xc8000;
-+		ci->pub.rambase = 0x198000;
-+		break;
- 	case BRCM_CC_4339_CHIP_ID:
- 	case BRCM_CC_4354_CHIP_ID:
- 	case BRCM_CC_4356_CHIP_ID:
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,6 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
-+#define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
-+#define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
- 
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
- 
-@@ -669,6 +673,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID		43362
- #define BRCM_CC_4335_CHIP_ID		0x4335
- #define BRCM_CC_4339_CHIP_ID		0x4339
-+#define BRCM_CC_4345_CHIP_ID		0x4345
- #define BRCM_CC_4354_CHIP_ID		0x4354
- #define BRCM_CC_4356_CHIP_ID		0x4356
- #define BRCM_CC_43566_CHIP_ID		43566
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341		0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_4345		0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
- 
- #define SDIO_VENDOR_ID_INTEL			0x0089
diff --git a/package/kernel/mac80211/patches/338-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch b/package/kernel/mac80211/patches/338-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
new file mode 100644
index 0000000..2f492e0
--- /dev/null
+++ b/package/kernel/mac80211/patches/338-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
@@ -0,0 +1,21 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Mon, 5 Oct 2015 17:41:25 +0200
+Subject: [PATCH] mac80211: initialize tid field in struct ieee80211_txq
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/net/mac80211/util.c
++++ b/net/mac80211/util.c
+@@ -3288,9 +3288,11 @@ void ieee80211_init_tx_queue(struct ieee
+ 	if (sta) {
+ 		txqi->txq.sta = &sta->sta;
+ 		sta->sta.txq[tid] = &txqi->txq;
++		txqi->txq.tid = tid;
+ 		txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
+ 	} else {
+ 		sdata->vif.txq = &txqi->txq;
++		txqi->txq.tid = 0;
+ 		txqi->txq.ac = IEEE80211_AC_BE;
+ 	}
+ }
diff --git a/package/kernel/mac80211/patches/339-brcmfmac-remove-duplication-of-ramsize-info.patch b/package/kernel/mac80211/patches/339-brcmfmac-remove-duplication-of-ramsize-info.patch
deleted file mode 100644
index 7a688c4..0000000
--- a/package/kernel/mac80211/patches/339-brcmfmac-remove-duplication-of-ramsize-info.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:27 +0100
-Subject: [PATCH] brcmfmac: remove duplication of ramsize info
-
-Removing the ramsize from the brcmf_sdio structure to avoid
-duplication. The information is available in brcmf_chip
-structure.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -432,8 +432,6 @@ struct brcmf_sdio {
- 	struct brcmf_sdio_dev *sdiodev;	/* sdio device handler */
- 	struct brcmf_chip *ci;	/* Chip info struct */
- 
--	u32 ramsize;		/* Size of RAM in SOCRAM (bytes) */
--
- 	u32 hostintmask;	/* Copy of Host Interrupt Mask */
- 	atomic_t intstatus;	/* Intstatus bits (events) pending */
- 	atomic_t fcstate;	/* State of dongle flow-control */
-@@ -1075,7 +1073,7 @@ static int brcmf_sdio_readshared(struct
- 	struct sdpcm_shared_le sh_le;
- 	__le32 addr_le;
- 
--	shaddr = bus->ci->rambase + bus->ramsize - 4;
-+	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
- 
- 	/*
- 	 * Read last word in socram to determine
-@@ -3871,13 +3869,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- 		drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- 	brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
- 
--	/* Get info on the SOCRAM cores... */
--	bus->ramsize = bus->ci->ramsize;
--	if (!(bus->ramsize)) {
--		brcmf_err("failed to find SOCRAM memory!\n");
--		goto fail;
--	}
--
- 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
- 	reg_val = brcmf_sdiod_regrb(bus->sdiodev,
- 				    SDIO_CCCR_BRCM_CARDCTRL, &err);
diff --git a/package/kernel/mac80211/patches/340-brcmfmac-always-perform-cores-checks.patch b/package/kernel/mac80211/patches/340-brcmfmac-always-perform-cores-checks.patch
deleted file mode 100644
index e2a2074..0000000
--- a/package/kernel/mac80211/patches/340-brcmfmac-always-perform-cores-checks.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:28 +0100
-Subject: [PATCH] brcmfmac: always perform cores checks
-
-Instead of checking the cores in the chip only if CONFIG_BRCMDBG
-is selected perform the check always and extend it with more sanity
-checking.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -419,13 +419,13 @@ static struct brcmf_core *brcmf_chip_add
- 	return &core->pub;
- }
- 
--#ifdef DEBUG
- /* safety check for chipinfo */
- static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
- {
- 	struct brcmf_core_priv *core;
- 	bool need_socram = false;
- 	bool has_socram = false;
-+	bool cpu_found = false;
- 	int idx = 1;
- 
- 	list_for_each_entry(core, &ci->cores, list) {
-@@ -435,12 +435,14 @@ static int brcmf_chip_cores_check(struct
- 
- 		switch (core->pub.id) {
- 		case BCMA_CORE_ARM_CM3:
-+			cpu_found = true;
- 			need_socram = true;
- 			break;
- 		case BCMA_CORE_INTERNAL_MEM:
- 			has_socram = true;
- 			break;
- 		case BCMA_CORE_ARM_CR4:
-+			cpu_found = true;
- 			if (ci->pub.rambase == 0) {
- 				brcmf_err("RAM base not provided with ARM CR4 core\n");
- 				return -ENOMEM;
-@@ -451,19 +453,21 @@ static int brcmf_chip_cores_check(struct
- 		}
- 	}
- 
-+	if (!cpu_found) {
-+		brcmf_err("CPU core not detected\n");
-+		return -ENXIO;
-+	}
- 	/* check RAM core presence for ARM CM3 core */
- 	if (need_socram && !has_socram) {
- 		brcmf_err("RAM core not provided with ARM CM3 core\n");
- 		return -ENODEV;
- 	}
-+	if (!ci->pub.ramsize) {
-+		brcmf_err("RAM size is undetermined\n");
-+		return -ENOMEM;
-+	}
- 	return 0;
- }
--#else	/* DEBUG */
--static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
--{
--	return 0;
--}
--#endif
- 
- static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
- {
diff --git a/package/kernel/mac80211/patches/341-brcmfmac-rename-chip-download-functions.patch b/package/kernel/mac80211/patches/341-brcmfmac-rename-chip-download-functions.patch
deleted file mode 100644
index a272800..0000000
--- a/package/kernel/mac80211/patches/341-brcmfmac-rename-chip-download-functions.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:29 +0100
-Subject: [PATCH] brcmfmac: rename chip download functions
-
-The functions brcmf_chip_[enter/exit]_download() are not exclusively
-used for firmware download so rename these more appropriate.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -807,7 +807,7 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 		err = -EINVAL;
- 	if (WARN_ON(!ops->prepare))
- 		err = -EINVAL;
--	if (WARN_ON(!ops->exit_dl))
-+	if (WARN_ON(!ops->activate))
- 		err = -EINVAL;
- 	if (err < 0)
- 		return ERR_PTR(-EINVAL);
-@@ -905,7 +905,7 @@ void brcmf_chip_resetcore(struct brcmf_c
- }
- 
- static void
--brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -919,7 +919,7 @@ brcmf_chip_cm3_enterdl(struct brcmf_chip
- 	brcmf_chip_resetcore(core, 0, 0, 0);
- }
- 
--static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip)
-+static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -929,7 +929,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- 		return false;
- 	}
- 
--	chip->ops->exit_dl(chip->ctx, &chip->pub, 0);
-+	chip->ops->activate(chip->ctx, &chip->pub, 0);
- 
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3);
- 	brcmf_chip_resetcore(core, 0, 0, 0);
-@@ -938,7 +938,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- }
- 
- static inline void
--brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
- 
-@@ -951,11 +951,11 @@ brcmf_chip_cr4_enterdl(struct brcmf_chip
- 			     D11_BCMA_IOCTL_PHYCLOCKEN);
- }
- 
--static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec)
-+static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
- {
- 	struct brcmf_core *core;
- 
--	chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec);
-+	chip->ops->activate(chip->ctx, &chip->pub, rstvec);
- 
- 	/* restore ARM */
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4);
-@@ -964,7 +964,7 @@ static bool brcmf_chip_cr4_exitdl(struct
- 	return true;
- }
- 
--void brcmf_chip_enter_download(struct brcmf_chip *pub)
-+void brcmf_chip_set_passive(struct brcmf_chip *pub)
- {
- 	struct brcmf_chip_priv *chip;
- 	struct brcmf_core *arm;
-@@ -974,14 +974,14 @@ void brcmf_chip_enter_download(struct br
- 	chip = container_of(pub, struct brcmf_chip_priv, pub);
- 	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- 	if (arm) {
--		brcmf_chip_cr4_enterdl(chip);
-+		brcmf_chip_cr4_set_passive(chip);
- 		return;
- 	}
- 
--	brcmf_chip_cm3_enterdl(chip);
-+	brcmf_chip_cm3_set_passive(chip);
- }
- 
--bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
-+bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec)
- {
- 	struct brcmf_chip_priv *chip;
- 	struct brcmf_core *arm;
-@@ -991,9 +991,9 @@ bool brcmf_chip_exit_download(struct brc
- 	chip = container_of(pub, struct brcmf_chip_priv, pub);
- 	arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- 	if (arm)
--		return brcmf_chip_cr4_exitdl(chip, rstvec);
-+		return brcmf_chip_cr4_set_active(chip, rstvec);
- 
--	return brcmf_chip_cm3_exitdl(chip);
-+	return brcmf_chip_cm3_set_active(chip);
- }
- 
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -64,7 +64,7 @@ struct brcmf_core {
-  * @write32: write 32-bit value over bus.
-  * @prepare: prepare bus for core configuration.
-  * @setup: bus-specific core setup.
-- * @exit_dl: exit download state.
-+ * @active: chip becomes active.
-  *	The callback should use the provided @rstvec when non-zero.
-  */
- struct brcmf_buscore_ops {
-@@ -72,7 +72,7 @@ struct brcmf_buscore_ops {
- 	void (*write32)(void *ctx, u32 addr, u32 value);
- 	int (*prepare)(void *ctx);
- 	int (*setup)(void *ctx, struct brcmf_chip *chip);
--	void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
-+	void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
- };
- 
- struct brcmf_chip *brcmf_chip_attach(void *ctx,
-@@ -84,8 +84,8 @@ bool brcmf_chip_iscoreup(struct brcmf_co
- void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
- void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
- 			  u32 postreset);
--void brcmf_chip_enter_download(struct brcmf_chip *ci);
--bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec);
-+void brcmf_chip_set_passive(struct brcmf_chip *ci);
-+bool brcmf_chip_set_active(struct brcmf_chip *ci, u32 rstvec);
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub);
- 
- #endif /* BRCMF_AXIDMP_H */
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,7 +509,7 @@ static void brcmf_pcie_attach(struct brc
- 
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
--	brcmf_chip_enter_download(devinfo->ci);
-+	brcmf_chip_set_passive(devinfo->ci);
- 
- 	if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- 		brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
-@@ -536,7 +536,7 @@ static int brcmf_pcie_exit_download_stat
- 		brcmf_chip_resetcore(core, 0, 0, 0);
- 	}
- 
--	return !brcmf_chip_exit_download(devinfo->ci, resetintr);
-+	return !brcmf_chip_set_active(devinfo->ci, resetintr);
- }
- 
- 
-@@ -1566,8 +1566,8 @@ static int brcmf_pcie_buscoreprep(void *
- }
- 
- 
--static void brcmf_pcie_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
--				      u32 rstvec)
-+static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+					u32 rstvec)
- {
- 	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
- 
-@@ -1577,7 +1577,7 @@ static void brcmf_pcie_buscore_exitdl(vo
- 
- static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
- 	.prepare = brcmf_pcie_buscoreprep,
--	.exit_dl = brcmf_pcie_buscore_exitdl,
-+	.activate = brcmf_pcie_buscore_activate,
- 	.read32 = brcmf_pcie_buscore_read32,
- 	.write32 = brcmf_pcie_buscore_write32,
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3357,7 +3357,7 @@ static int brcmf_sdio_download_firmware(
- 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 
- 	/* Keep arm in reset */
--	brcmf_chip_enter_download(bus->ci);
-+	brcmf_chip_set_passive(bus->ci);
- 
- 	rstvec = get_unaligned_le32(fw->data);
- 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
-@@ -3378,7 +3378,7 @@ static int brcmf_sdio_download_firmware(
- 	}
- 
- 	/* Take arm out of reset */
--	if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
-+	if (!brcmf_chip_set_active(bus->ci, rstvec)) {
- 		brcmf_err("error getting out of ARM core reset\n");
- 		goto err;
- 	}
-@@ -3771,8 +3771,8 @@ static int brcmf_sdio_buscoreprep(void *
- 	return 0;
- }
- 
--static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
--				      u32 rstvec)
-+static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+					u32 rstvec)
- {
- 	struct brcmf_sdio_dev *sdiodev = ctx;
- 	struct brcmf_core *core;
-@@ -3815,7 +3815,7 @@ static void brcmf_sdio_buscore_write32(v
- 
- static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
- 	.prepare = brcmf_sdio_buscoreprep,
--	.exit_dl = brcmf_sdio_buscore_exitdl,
-+	.activate = brcmf_sdio_buscore_activate,
- 	.read32 = brcmf_sdio_buscore_read32,
- 	.write32 = brcmf_sdio_buscore_write32,
- };
-@@ -4239,12 +4239,11 @@ void brcmf_sdio_remove(struct brcmf_sdio
- 				sdio_claim_host(bus->sdiodev->func[1]);
- 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 				/* Leave the device in state where it is
--				 * 'quiet'. This is done by putting it in
--				 * download_state which essentially resets
--				 * all necessary cores.
-+				 * 'passive'. This is done by resetting all
-+				 * necessary cores.
- 				 */
- 				msleep(20);
--				brcmf_chip_enter_download(bus->ci);
-+				brcmf_chip_set_passive(bus->ci);
- 				brcmf_sdio_clkctl(bus, CLK_NONE, false);
- 				sdio_release_host(bus->sdiodev->func[1]);
- 			}
diff --git a/package/kernel/mac80211/patches/342-brcmfmac-assure-device-is-ready-for-download-after-b.patch b/package/kernel/mac80211/patches/342-brcmfmac-assure-device-is-ready-for-download-after-b.patch
deleted file mode 100644
index 6b1dd81..0000000
--- a/package/kernel/mac80211/patches/342-brcmfmac-assure-device-is-ready-for-download-after-b.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:30 +0100
-Subject: [PATCH] brcmfmac: assure device is ready for download after
- brcmf_chip_attach()
-
-Make the brcmf_chip_attach() function responsible for putting the
-device in a state where it is accessible for firmware download.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -786,12 +786,6 @@ static int brcmf_chip_setup(struct brcmf
- 	if (chip->ops->setup)
- 		ret = chip->ops->setup(chip->ctx, pub);
- 
--	/*
--	 * Make sure any on-chip ARM is off (in case strapping is wrong),
--	 * or downloaded code was already running.
--	 */
--	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
--	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
- 	return ret;
- }
- 
-@@ -833,6 +827,8 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 	if (err < 0)
- 		goto fail;
- 
-+	/* assure chip is passive for download */
-+	brcmf_chip_set_passive(&chip->pub);
- 	return &chip->pub;
- 
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,8 +509,6 @@ static void brcmf_pcie_attach(struct brc
- 
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
--	brcmf_chip_set_passive(devinfo->ci);
--
- 	if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- 		brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
- 		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_ARMCR4REG_BANKIDX,
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3356,9 +3356,6 @@ static int brcmf_sdio_download_firmware(
- 	sdio_claim_host(bus->sdiodev->func[1]);
- 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 
--	/* Keep arm in reset */
--	brcmf_chip_set_passive(bus->ci);
--
- 	rstvec = get_unaligned_le32(fw->data);
- 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
- 
diff --git a/package/kernel/mac80211/patches/343-brcmfmac-extract-ram-size-info-from-internal-memory-.patch b/package/kernel/mac80211/patches/343-brcmfmac-extract-ram-size-info-from-internal-memory-.patch
deleted file mode 100644
index bcc2ed4..0000000
--- a/package/kernel/mac80211/patches/343-brcmfmac-extract-ram-size-info-from-internal-memory-.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:31 +0100
-Subject: [PATCH] brcmfmac: extract ram size info from internal memory
- registers
-
-Instead of hard-coded memory sizes it is possible to obtain that
-information from the internal memory registers.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -100,9 +100,6 @@
- #define BCM4329_CORE_SOCRAM_BASE	0x18003000
- /* ARM Cortex M3 core, ID 0x82a */
- #define BCM4329_CORE_ARM_BASE		0x18002000
--#define BCM4329_RAMSIZE			0x48000
--/* bcm43143 */
--#define BCM43143_RAMSIZE		0x70000
- 
- #define CORE_SB(base, field) \
- 		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
-@@ -150,6 +147,78 @@ struct sbconfig {
- 	u32 sbidhigh;	/* identification */
- };
- 
-+/* bankidx and bankinfo reg defines corerev >= 8 */
-+#define SOCRAM_BANKINFO_RETNTRAM_MASK	0x00010000
-+#define SOCRAM_BANKINFO_SZMASK		0x0000007f
-+#define SOCRAM_BANKIDX_ROM_MASK		0x00000100
-+
-+#define SOCRAM_BANKIDX_MEMTYPE_SHIFT	8
-+/* socram bankinfo memtype */
-+#define SOCRAM_MEMTYPE_RAM		0
-+#define SOCRAM_MEMTYPE_R0M		1
-+#define SOCRAM_MEMTYPE_DEVRAM		2
-+
-+#define SOCRAM_BANKINFO_SZBASE		8192
-+#define SRCI_LSS_MASK		0x00f00000
-+#define SRCI_LSS_SHIFT		20
-+#define	SRCI_SRNB_MASK		0xf0
-+#define	SRCI_SRNB_SHIFT		4
-+#define	SRCI_SRBSZ_MASK		0xf
-+#define	SRCI_SRBSZ_SHIFT	0
-+#define SR_BSZ_BASE		14
-+
-+struct sbsocramregs {
-+	u32 coreinfo;
-+	u32 bwalloc;
-+	u32 extracoreinfo;
-+	u32 biststat;
-+	u32 bankidx;
-+	u32 standbyctrl;
-+
-+	u32 errlogstatus;	/* rev 6 */
-+	u32 errlogaddr;	/* rev 6 */
-+	/* used for patching rev 3 & 5 */
-+	u32 cambankidx;
-+	u32 cambankstandbyctrl;
-+	u32 cambankpatchctrl;
-+	u32 cambankpatchtblbaseaddr;
-+	u32 cambankcmdreg;
-+	u32 cambankdatareg;
-+	u32 cambankmaskreg;
-+	u32 PAD[1];
-+	u32 bankinfo;	/* corev 8 */
-+	u32 bankpda;
-+	u32 PAD[14];
-+	u32 extmemconfig;
-+	u32 extmemparitycsr;
-+	u32 extmemparityerrdata;
-+	u32 extmemparityerrcnt;
-+	u32 extmemwrctrlandsize;
-+	u32 PAD[84];
-+	u32 workaround;
-+	u32 pwrctl;		/* corerev >= 2 */
-+	u32 PAD[133];
-+	u32 sr_control;     /* corerev >= 15 */
-+	u32 sr_status;      /* corerev >= 15 */
-+	u32 sr_address;     /* corerev >= 15 */
-+	u32 sr_data;        /* corerev >= 15 */
-+};
-+
-+#define SOCRAMREGOFFS(_f)	offsetof(struct sbsocramregs, _f)
-+
-+#define ARMCR4_CAP		(0x04)
-+#define ARMCR4_BANKIDX		(0x40)
-+#define ARMCR4_BANKINFO		(0x44)
-+#define ARMCR4_BANKPDA		(0x4C)
-+
-+#define	ARMCR4_TCBBNB_MASK	0xf0
-+#define	ARMCR4_TCBBNB_SHIFT	4
-+#define	ARMCR4_TCBANB_MASK	0xf
-+#define	ARMCR4_TCBANB_SHIFT	0
-+
-+#define	ARMCR4_BSZ_MASK		0x3f
-+#define	ARMCR4_BSZ_MULT		8192
-+
- struct brcmf_core_priv {
- 	struct brcmf_core pub;
- 	u32 wrapbase;
-@@ -443,10 +512,6 @@ static int brcmf_chip_cores_check(struct
- 			break;
- 		case BCMA_CORE_ARM_CR4:
- 			cpu_found = true;
--			if (ci->pub.rambase == 0) {
--				brcmf_err("RAM base not provided with ARM CR4 core\n");
--				return -ENOMEM;
--			}
- 			break;
- 		default:
- 			break;
-@@ -462,60 +527,160 @@ static int brcmf_chip_cores_check(struct
- 		brcmf_err("RAM core not provided with ARM CM3 core\n");
- 		return -ENODEV;
- 	}
--	if (!ci->pub.ramsize) {
--		brcmf_err("RAM size is undetermined\n");
--		return -ENOMEM;
--	}
- 	return 0;
- }
- 
--static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+static u32 brcmf_chip_core_read32(struct brcmf_core_priv *core, u16 reg)
- {
--	switch (ci->pub.chip) {
--	case BRCM_CC_4329_CHIP_ID:
--		ci->pub.ramsize = BCM4329_RAMSIZE;
--		break;
--	case BRCM_CC_43143_CHIP_ID:
--		ci->pub.ramsize = BCM43143_RAMSIZE;
--		break;
--	case BRCM_CC_43241_CHIP_ID:
--		ci->pub.ramsize = 0x90000;
--		break;
--	case BRCM_CC_4330_CHIP_ID:
--		ci->pub.ramsize = 0x48000;
--		break;
-+	return core->chip->ops->read32(core->chip->ctx, core->pub.base + reg);
-+}
-+
-+static void brcmf_chip_core_write32(struct brcmf_core_priv *core,
-+				    u16 reg, u32 val)
-+{
-+	core->chip->ops->write32(core->chip->ctx, core->pub.base + reg, val);
-+}
-+
-+static bool brcmf_chip_socram_banksize(struct brcmf_core_priv *core, u8 idx,
-+				       u32 *banksize)
-+{
-+	u32 bankinfo;
-+	u32 bankidx = (SOCRAM_MEMTYPE_RAM << SOCRAM_BANKIDX_MEMTYPE_SHIFT);
-+
-+	bankidx |= idx;
-+	brcmf_chip_core_write32(core, SOCRAMREGOFFS(bankidx), bankidx);
-+	bankinfo = brcmf_chip_core_read32(core, SOCRAMREGOFFS(bankinfo));
-+	*banksize = (bankinfo & SOCRAM_BANKINFO_SZMASK) + 1;
-+	*banksize *= SOCRAM_BANKINFO_SZBASE;
-+	return !!(bankinfo & SOCRAM_BANKINFO_RETNTRAM_MASK);
-+}
-+
-+static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize,
-+				      u32 *srsize)
-+{
-+	u32 coreinfo;
-+	uint nb, banksize, lss;
-+	bool retent;
-+	int i;
-+
-+	*ramsize = 0;
-+	*srsize = 0;
-+
-+	if (WARN_ON(sr->pub.rev < 4))
-+		return;
-+
-+	if (!brcmf_chip_iscoreup(&sr->pub))
-+		brcmf_chip_resetcore(&sr->pub, 0, 0, 0);
-+
-+	/* Get info for determining size */
-+	coreinfo = brcmf_chip_core_read32(sr, SOCRAMREGOFFS(coreinfo));
-+	nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+
-+	if ((sr->pub.rev <= 7) || (sr->pub.rev == 12)) {
-+		banksize = (coreinfo & SRCI_SRBSZ_MASK);
-+		lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
-+		if (lss != 0)
-+			nb--;
-+		*ramsize = nb * (1 << (banksize + SR_BSZ_BASE));
-+		if (lss != 0)
-+			*ramsize += (1 << ((lss - 1) + SR_BSZ_BASE));
-+	} else {
-+		nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+		for (i = 0; i < nb; i++) {
-+			retent = brcmf_chip_socram_banksize(sr, i, &banksize);
-+			*ramsize += banksize;
-+			if (retent)
-+				*srsize += banksize;
-+		}
-+	}
-+
-+	/* hardcoded save&restore memory sizes */
-+	switch (sr->chip->pub.chip) {
- 	case BRCM_CC_4334_CHIP_ID:
--	case BRCM_CC_43340_CHIP_ID:
--		ci->pub.ramsize = 0x80000;
-+		if (sr->chip->pub.chiprev < 2)
-+			*srsize = (32 * 1024);
- 		break;
--	case BRCM_CC_4335_CHIP_ID:
--		ci->pub.ramsize = 0xc0000;
--		ci->pub.rambase = 0x180000;
--		break;
--	case BRCM_CC_43362_CHIP_ID:
--		ci->pub.ramsize = 0x3c000;
-+	default:
- 		break;
-+	}
-+}
-+
-+/** Return the TCM-RAM size of the ARMCR4 core. */
-+static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
-+{
-+	u32 corecap;
-+	u32 memsize = 0;
-+	u32 nab;
-+	u32 nbb;
-+	u32 totb;
-+	u32 bxinfo;
-+	u32 idx;
-+
-+	corecap = brcmf_chip_core_read32(cr4, ARMCR4_CAP);
-+
-+	nab = (corecap & ARMCR4_TCBANB_MASK) >> ARMCR4_TCBANB_SHIFT;
-+	nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT;
-+	totb = nab + nbb;
-+
-+	for (idx = 0; idx < totb; idx++) {
-+		brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx);
-+		bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO);
-+		memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT;
-+	}
-+
-+	return memsize;
-+}
-+
-+static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
-+{
-+	switch (ci->pub.chip) {
- 	case BRCM_CC_4345_CHIP_ID:
--		ci->pub.ramsize = 0xc8000;
--		ci->pub.rambase = 0x198000;
--		break;
-+		return 0x198000;
-+	case BRCM_CC_4335_CHIP_ID:
- 	case BRCM_CC_4339_CHIP_ID:
- 	case BRCM_CC_4354_CHIP_ID:
- 	case BRCM_CC_4356_CHIP_ID:
- 	case BRCM_CC_43567_CHIP_ID:
- 	case BRCM_CC_43569_CHIP_ID:
- 	case BRCM_CC_43570_CHIP_ID:
--		ci->pub.ramsize = 0xc0000;
--		ci->pub.rambase = 0x180000;
--		break;
- 	case BRCM_CC_43602_CHIP_ID:
--		ci->pub.ramsize = 0xf0000;
--		ci->pub.rambase = 0x180000;
--		break;
-+		return 0x180000;
- 	default:
- 		brcmf_err("unknown chip: %s\n", ci->pub.name);
- 		break;
- 	}
-+	return 0;
-+}
-+
-+static int brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+{
-+	struct brcmf_core_priv *mem_core;
-+	struct brcmf_core *mem;
-+
-+	mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_ARM_CR4);
-+	if (mem) {
-+		mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+		ci->pub.ramsize = brcmf_chip_tcm_ramsize(mem_core);
-+		ci->pub.rambase = brcmf_chip_tcm_rambase(ci);
-+		if (!ci->pub.rambase) {
-+			brcmf_err("RAM base not provided with ARM CR4 core\n");
-+			return -EINVAL;
-+		}
-+	} else {
-+		mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM);
-+		mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+		brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize,
-+					  &ci->pub.srsize);
-+	}
-+	brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n",
-+		  ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize,
-+		  ci->pub.srsize, ci->pub.srsize);
-+
-+	if (!ci->pub.ramsize) {
-+		brcmf_err("RAM size is undetermined\n");
-+		return -ENOMEM;
-+	}
-+	return 0;
- }
- 
- static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr,
-@@ -668,6 +833,7 @@ static int brcmf_chip_recognition(struct
- 	struct brcmf_core *core;
- 	u32 regdata;
- 	u32 socitype;
-+	int ret;
- 
- 	/* Get CC core rev
- 	 * Chipid is assume to be at offset 0 from SI_ENUM_BASE
-@@ -720,9 +886,13 @@ static int brcmf_chip_recognition(struct
- 		return -ENODEV;
- 	}
- 
--	brcmf_chip_get_raminfo(ci);
--
--	return brcmf_chip_cores_check(ci);
-+	ret = brcmf_chip_cores_check(ci);
-+	if (ret)
-+		return ret;
-+
-+	/* assure chip is passive for core access */
-+	brcmf_chip_set_passive(&ci->pub);
-+	return brcmf_chip_get_raminfo(ci);
- }
- 
- static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id)
-@@ -827,8 +997,6 @@ struct brcmf_chip *brcmf_chip_attach(voi
- 	if (err < 0)
- 		goto fail;
- 
--	/* assure chip is passive for download */
--	brcmf_chip_set_passive(&chip->pub);
- 	return &chip->pub;
- 
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -30,7 +30,8 @@
-  * @pmucaps: PMU capabilities.
-  * @pmurev: PMU revision.
-  * @rambase: RAM base address (only applicable for ARM CR4 chips).
-- * @ramsize: amount of RAM on chip.
-+ * @ramsize: amount of RAM on chip including retention.
-+ * @srsize: amount of retention RAM on chip.
-  * @name: string representation of the chip identifier.
-  */
- struct brcmf_chip {
-@@ -41,6 +42,7 @@ struct brcmf_chip {
- 	u32 pmurev;
- 	u32 rambase;
- 	u32 ramsize;
-+	u32 srsize;
- 	char name[8];
- };
- 
diff --git a/package/kernel/mac80211/patches/344-brcmfmac-take-save-restore-memory-into-account-for-S.patch b/package/kernel/mac80211/patches/344-brcmfmac-take-save-restore-memory-into-account-for-S.patch
deleted file mode 100644
index 69618a7..0000000
--- a/package/kernel/mac80211/patches/344-brcmfmac-take-save-restore-memory-into-account-for-S.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:32 +0100
-Subject: [PATCH] brcmfmac: take save&restore memory into account for SDIO
- shared info
-
-The firmware provides pointer to SDIO shared information at end of
-RAM during firmware initialization. End of RAM is obviously determined
-by the actual ram size, but part of that may be used for save&restore
-memory. In that case another location in RAM will hold the pointer.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -1067,44 +1067,47 @@ static inline bool brcmf_sdio_valid_shar
- static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
- 				 struct sdpcm_shared *sh)
- {
--	u32 addr;
-+	u32 addr = 0;
- 	int rv;
- 	u32 shaddr = 0;
- 	struct sdpcm_shared_le sh_le;
- 	__le32 addr_le;
- 
--	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+	sdio_claim_host(bus->sdiodev->func[1]);
-+	brcmf_sdio_bus_sleep(bus, false, false);
- 
- 	/*
- 	 * Read last word in socram to determine
- 	 * address of sdpcm_shared structure
- 	 */
--	sdio_claim_host(bus->sdiodev->func[1]);
--	brcmf_sdio_bus_sleep(bus, false, false);
--	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
--	sdio_release_host(bus->sdiodev->func[1]);
-+	shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+	if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci))
-+		shaddr -= bus->ci->srsize;
-+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr,
-+			       (u8 *)&addr_le, 4);
- 	if (rv < 0)
--		return rv;
--
--	addr = le32_to_cpu(addr_le);
--
--	brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
-+		goto fail;
- 
- 	/*
- 	 * Check if addr is valid.
- 	 * NVRAM length at the end of memory should have been overwritten.
- 	 */
-+	addr = le32_to_cpu(addr_le);
- 	if (!brcmf_sdio_valid_shared_address(addr)) {
--			brcmf_err("invalid sdpcm_shared address 0x%08X\n",
--				  addr);
--			return -EINVAL;
-+		brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr);
-+		rv = -EINVAL;
-+		goto fail;
- 	}
- 
-+	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
-+
- 	/* Read hndrte_shared structure */
- 	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
- 			       sizeof(struct sdpcm_shared_le));
- 	if (rv < 0)
--		return rv;
-+		goto fail;
-+
-+	sdio_release_host(bus->sdiodev->func[1]);
- 
- 	/* Endianness */
- 	sh->flags = le32_to_cpu(sh_le.flags);
-@@ -1121,8 +1124,13 @@ static int brcmf_sdio_readshared(struct
- 			  sh->flags & SDPCM_SHARED_VERSION_MASK);
- 		return -EPROTO;
- 	}
--
- 	return 0;
-+
-+fail:
-+	brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
-+		  rv, addr);
-+	sdio_release_host(bus->sdiodev->func[1]);
-+	return rv;
- }
- 
- static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
diff --git a/package/kernel/mac80211/patches/345-brcmfmac-fix-watchdog-timer-regression.patch b/package/kernel/mac80211/patches/345-brcmfmac-fix-watchdog-timer-regression.patch
deleted file mode 100644
index 1b10dbb..0000000
--- a/package/kernel/mac80211/patches/345-brcmfmac-fix-watchdog-timer-regression.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:33 +0100
-Subject: [PATCH] brcmfmac: fix watchdog timer regression
-
-The watchdog timer is used to put the device in a low-power mode when
-it is idle for some time. This timer is stopped during that mode and
-should be restarted upon activity. This has been broken by commit
-d4150fced0365 ("brcmfmac: Simplify watchdog sleep."). This patch
-restores the behaviour as it was before that commit.
-
-Reported-by: Pontus Fuchs <pontusf@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -972,7 +972,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 			brcmf_sdio_sdclk(bus, true);
- 		/* Now request HT Avail on the backplane */
- 		brcmf_sdio_htclk(bus, true, pendok);
--		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 		break;
- 
- 	case CLK_SDONLY:
-@@ -984,7 +983,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 		else
- 			brcmf_err("request for %d -> %d\n",
- 				  bus->clkstate, target);
--		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 		break;
- 
- 	case CLK_NONE:
-@@ -993,7 +991,6 @@ static int brcmf_sdio_clkctl(struct brcm
- 			brcmf_sdio_htclk(bus, false, false);
- 		/* Now remove the SD clock */
- 		brcmf_sdio_sdclk(bus, false);
--		brcmf_sdio_wd_timer(bus, 0);
- 		break;
- 	}
- #ifdef DEBUG
-@@ -1048,6 +1045,7 @@ end:
- 			brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
- 	} else {
- 		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
-+		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- 	}
- 	bus->sleeping = sleep;
- 	brcmf_dbg(SDIO, "new state %s\n",
-@@ -4242,6 +4240,7 @@ void brcmf_sdio_remove(struct brcmf_sdio
- 		if (bus->ci) {
- 			if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
- 				sdio_claim_host(bus->sdiodev->func[1]);
-+				brcmf_sdio_wd_timer(bus, 0);
- 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- 				/* Leave the device in state where it is
- 				 * 'passive'. This is done by resetting all
diff --git a/package/kernel/mac80211/patches/346-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch b/package/kernel/mac80211/patches/346-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch
deleted file mode 100644
index af76f13..0000000
--- a/package/kernel/mac80211/patches/346-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:21 +0100
-Subject: [PATCH] brcmfmac: avoid runtime-pm for sdio host controller
-
-Several host controllers supporting runtime-pm are causing issues
-with our sdio wireless cards because they disable the sdio interrupt
-upon going into runtime suspend. This patch avoids that by doing
-a pm_runtime_forbid() call during the probe. Tested with Sony Vaio
-Duo 13 which uses sdhci-acpi host controller.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -29,6 +29,7 @@
- #include <linux/mmc/host.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/brcmfmac-sdio.h>
-+#include <linux/pm_runtime.h>
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-@@ -1006,6 +1007,7 @@ static int brcmf_sdiod_remove(struct brc
- 	sg_free_table(&sdiodev->sgtable);
- 	sdiodev->sbwad = 0;
- 
-+	pm_runtime_allow(sdiodev->func[1]->card->host->parent);
- 	return 0;
- }
- 
-@@ -1074,7 +1076,7 @@ static int brcmf_sdiod_probe(struct brcm
- 		ret = -ENODEV;
- 		goto out;
- 	}
--
-+	pm_runtime_forbid(host->parent);
- out:
- 	if (ret)
- 		brcmf_sdiod_remove(sdiodev);
diff --git a/package/kernel/mac80211/patches/347-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch b/package/kernel/mac80211/patches/347-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch
deleted file mode 100644
index c419cc6..0000000
--- a/package/kernel/mac80211/patches/347-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:22 +0100
-Subject: [PATCH] brcmfmac: Add necessary memory barriers for SDIO.
-
-SDIO uses a thread to handle all communication with the device,
-for this data is exchanged between threads. This data needs proper
-memory barriers to make sure that data "exchange" is going correct.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -507,8 +507,8 @@ struct brcmf_sdio {
- 
- 	struct workqueue_struct *brcmf_wq;
- 	struct work_struct datawork;
--	atomic_t dpc_tskcnt;
--	atomic_t dpc_running;
-+	bool dpc_triggered;
-+	bool dpc_running;
- 
- 	bool txoff;		/* Transmit flow-controlled */
- 	struct brcmf_sdio_count sdcnt;
-@@ -2713,6 +2713,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
- 						      bus->ctrl_frame_len);
- 			bus->ctrl_frame_err = err;
-+			wmb();
- 			bus->ctrl_frame_stat = false;
- 		}
- 		sdio_release_host(bus->sdiodev->func[1]);
-@@ -2734,6 +2735,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 			sdio_claim_host(bus->sdiodev->func[1]);
- 			if (bus->ctrl_frame_stat) {
- 				bus->ctrl_frame_err = -ENODEV;
-+				wmb();
- 				bus->ctrl_frame_stat = false;
- 				brcmf_sdio_wait_event_wakeup(bus);
- 			}
-@@ -2744,7 +2746,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 		   (!atomic_read(&bus->fcstate) &&
- 		    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
- 		    data_ok(bus))) {
--		atomic_inc(&bus->dpc_tskcnt);
-+		bus->dpc_triggered = true;
- 	}
- }
- 
-@@ -2940,6 +2942,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	/* Send from dpc */
- 	bus->ctrl_frame_buf = msg;
- 	bus->ctrl_frame_len = msglen;
-+	wmb();
- 	bus->ctrl_frame_stat = true;
- 
- 	brcmf_sdio_trigger_dpc(bus);
-@@ -2958,6 +2961,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	if (!ret) {
- 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- 			  bus->ctrl_frame_err);
-+		rmb();
- 		ret = bus->ctrl_frame_err;
- 	}
- 
-@@ -3526,8 +3530,8 @@ done:
- 
- void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus)
- {
--	if (atomic_read(&bus->dpc_tskcnt) == 0) {
--		atomic_inc(&bus->dpc_tskcnt);
-+	if (!bus->dpc_triggered) {
-+		bus->dpc_triggered = true;
- 		queue_work(bus->brcmf_wq, &bus->datawork);
- 	}
- }
-@@ -3558,7 +3562,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 	if (!bus->intr)
- 		brcmf_err("isr w/o interrupt configured!\n");
- 
--	atomic_inc(&bus->dpc_tskcnt);
-+	bus->dpc_triggered = true;
- 	queue_work(bus->brcmf_wq, &bus->datawork);
- }
- 
-@@ -3578,7 +3582,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 		if (!bus->intr ||
- 		    (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
- 
--			if (atomic_read(&bus->dpc_tskcnt) == 0) {
-+			if (!bus->dpc_triggered) {
- 				u8 devpend;
- 
- 				sdio_claim_host(bus->sdiodev->func[1]);
-@@ -3596,7 +3600,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 				bus->sdcnt.pollcnt++;
- 				atomic_set(&bus->ipend, 1);
- 
--				atomic_inc(&bus->dpc_tskcnt);
-+				bus->dpc_triggered = true;
- 				queue_work(bus->brcmf_wq, &bus->datawork);
- 			}
- 		}
-@@ -3623,17 +3627,21 @@ static void brcmf_sdio_bus_watchdog(stru
- #endif				/* DEBUG */
- 
- 	/* On idle timeout clear activity flag and/or turn off clock */
--	if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
--	    (atomic_read(&bus->dpc_running) == 0) &&
--	    (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
--		bus->idlecount++;
--		if (bus->idlecount > bus->idletime) {
--			brcmf_dbg(SDIO, "idle\n");
--			sdio_claim_host(bus->sdiodev->func[1]);
--			brcmf_sdio_wd_timer(bus, 0);
-+	if (!bus->dpc_triggered) {
-+		rmb();
-+		if ((!bus->dpc_running) && (bus->idletime > 0) &&
-+		    (bus->clkstate == CLK_AVAIL)) {
-+			bus->idlecount++;
-+			if (bus->idlecount > bus->idletime) {
-+				brcmf_dbg(SDIO, "idle\n");
-+				sdio_claim_host(bus->sdiodev->func[1]);
-+				brcmf_sdio_wd_timer(bus, 0);
-+				bus->idlecount = 0;
-+				brcmf_sdio_bus_sleep(bus, true, false);
-+				sdio_release_host(bus->sdiodev->func[1]);
-+			}
-+		} else {
- 			bus->idlecount = 0;
--			brcmf_sdio_bus_sleep(bus, true, false);
--			sdio_release_host(bus->sdiodev->func[1]);
- 		}
- 	} else {
- 		bus->idlecount = 0;
-@@ -3645,13 +3653,14 @@ static void brcmf_sdio_dataworker(struct
- 	struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
- 					      datawork);
- 
--	while (atomic_read(&bus->dpc_tskcnt)) {
--		atomic_set(&bus->dpc_running, 1);
--		atomic_set(&bus->dpc_tskcnt, 0);
-+	bus->dpc_running = true;
-+	wmb();
-+	while (ACCESS_ONCE(bus->dpc_triggered)) {
-+		bus->dpc_triggered = false;
- 		brcmf_sdio_dpc(bus);
- 		bus->idlecount = 0;
--		atomic_set(&bus->dpc_running, 0);
- 	}
-+	bus->dpc_running = false;
- 	if (brcmf_sdiod_freezing(bus->sdiodev)) {
- 		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
- 		brcmf_sdiod_try_freeze(bus->sdiodev);
-@@ -4144,8 +4153,8 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 		bus->watchdog_tsk = NULL;
- 	}
- 	/* Initialize DPC thread */
--	atomic_set(&bus->dpc_tskcnt, 0);
--	atomic_set(&bus->dpc_running, 0);
-+	bus->dpc_triggered = false;
-+	bus->dpc_running = false;
- 
- 	/* Assign bus interface call back */
- 	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
diff --git a/package/kernel/mac80211/patches/348-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch b/package/kernel/mac80211/patches/348-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch
deleted file mode 100644
index 1bc98a0..0000000
--- a/package/kernel/mac80211/patches/348-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:24 +0100
-Subject: [PATCH] brcmfmac: Remove unnecessary new-line in pcie console
- logging.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -651,10 +651,9 @@ static void brcmf_pcie_bus_console_read(
- 			console->log_str[console->log_idx] = ch;
- 			console->log_idx++;
- 		}
--
- 		if (ch == '\n') {
- 			console->log_str[console->log_idx] = 0;
--			brcmf_dbg(PCIE, "CONSOLE: %s\n", console->log_str);
-+			brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
- 			console->log_idx = 0;
- 		}
- 	}
diff --git a/package/kernel/mac80211/patches/349-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch b/package/kernel/mac80211/patches/349-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch
deleted file mode 100644
index fcf0bf3..0000000
--- a/package/kernel/mac80211/patches/349-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:25 +0100
-Subject: [PATCH] brcmfmac: add MODULE_FIRMWARE() macros for bcm4356 PCIe
- device
-
-The BCM4356 PCIe wireless device was added recently but overlooked
-the fact that the MODULE_FIRMWARE() macros were missing for the
-firmwares needed by this device.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -189,6 +189,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
- 
diff --git a/package/kernel/mac80211/patches/350-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch b/package/kernel/mac80211/patches/350-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch
deleted file mode 100644
index b3e9bc9..0000000
--- a/package/kernel/mac80211/patches/350-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:26 +0100
-Subject: [PATCH] brcmfmac: add support for BCM43430 SDIO chipset
-
-This patch added support for the BCM43430 802.11n SDIO chipset.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1098,6 +1098,7 @@ static const struct sdio_device_id brcmf
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- 	{ /* end: all zeroes */ }
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -600,6 +600,12 @@ static void brcmf_chip_socram_ramsize(st
- 		if (sr->chip->pub.chiprev < 2)
- 			*srsize = (32 * 1024);
- 		break;
-+	case BRCM_CC_43430_CHIP_ID:
-+		/* assume sr for now as we can not check
-+		 * firmware sr capability at this point.
-+		 */
-+		*srsize = (64 * 1024);
-+		break;
- 	default:
- 		break;
- 	}
-@@ -1072,6 +1078,7 @@ static void
- brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- 	struct brcmf_core *core;
-+	struct brcmf_core_priv *sr;
- 
- 	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
-@@ -1081,6 +1088,13 @@ brcmf_chip_cm3_set_passive(struct brcmf_
- 			     D11_BCMA_IOCTL_PHYCLOCKEN);
- 	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM);
- 	brcmf_chip_resetcore(core, 0, 0, 0);
-+
-+	/* disable bank #3 remap for this device */
-+	if (chip->pub.chip == BRCM_CC_43430_CHIP_ID) {
-+		sr = container_of(core, struct brcmf_core_priv, pub);
-+		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankidx), 3);
-+		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankpda), 0);
-+	}
- }
- 
- static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
-@@ -1188,6 +1202,10 @@ bool brcmf_chip_sr_capable(struct brcmf_
- 		addr = CORE_CC_REG(base, chipcontrol_data);
- 		reg = chip->ops->read32(chip->ctx, addr);
- 		return (reg & pmu_cc3_mask) != 0;
-+	case BRCM_CC_43430_CHIP_ID:
-+		addr = CORE_CC_REG(base, sr_control1);
-+		reg = chip->ops->read32(chip->ctx, addr);
-+		return reg != 0;
- 	default:
- 		addr = CORE_CC_REG(base, pmucapabilities_ext);
- 		reg = chip->ops->read32(chip->ctx, addr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -615,6 +615,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
-+#define BCM43430_FIRMWARE_NAME		"brcm/brcmfmac43430-sdio.bin"
-+#define BCM43430_NVRAM_NAME		"brcm/brcmfmac43430-sdio.txt"
- #define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
- #define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
-@@ -671,6 +675,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+	{ BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
- 	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID		43362
- #define BRCM_CC_4335_CHIP_ID		0x4335
- #define BRCM_CC_4339_CHIP_ID		0x4339
-+#define BRCM_CC_43430_CHIP_ID		43430
- #define BRCM_CC_4345_CHIP_ID		0x4345
- #define BRCM_CC_4354_CHIP_ID		0x4354
- #define BRCM_CC_4356_CHIP_ID		0x4356
---- a/drivers/net/wireless/brcm80211/include/chipcommon.h
-+++ b/drivers/net/wireless/brcm80211/include/chipcommon.h
-@@ -183,7 +183,14 @@ struct chipcregs {
- 	u8 uart1lsr;
- 	u8 uart1msr;
- 	u8 uart1scratch;
--	u32 PAD[126];
-+	u32 PAD[62];
-+
-+	/* save/restore, corerev >= 48 */
-+	u32 sr_capability;          /* 0x500 */
-+	u32 sr_control0;            /* 0x504 */
-+	u32 sr_control1;            /* 0x508 */
-+	u32 gpio_control;           /* 0x50C */
-+	u32 PAD[60];
- 
- 	/* PMU registers (corerev >= 20) */
- 	u32 pmucontrol;	/* 0x600 */
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341		0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_43430		0xa9a6
- #define SDIO_DEVICE_ID_BROADCOM_4345		0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
- 
diff --git a/package/kernel/mac80211/patches/351-brcmfmac-only-support-the-BCM43455-7-device.patch b/package/kernel/mac80211/patches/351-brcmfmac-only-support-the-BCM43455-7-device.patch
deleted file mode 100644
index c3d7bc2..0000000
--- a/package/kernel/mac80211/patches/351-brcmfmac-only-support-the-BCM43455-7-device.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:27 +0100
-Subject: [PATCH] brcmfmac: only support the BCM43455/7 device
-
-Recently support was added for the BCM4345 SDIO chipset by
-commit 9c51026509d7 ("brcmfmac: Add support for BCM4345 SDIO chipset")
-however this was verified using a BCM43455 device, which is
-a more recent revision of the chip. This patch assure that
-older revisions are not probed as they would fail.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,8 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
- #define BCM43430_FIRMWARE_NAME		"brcm/brcmfmac43430-sdio.bin"
- #define BCM43430_NVRAM_NAME		"brcm/brcmfmac43430-sdio.txt"
--#define BCM4345_FIRMWARE_NAME		"brcm/brcmfmac4345-sdio.bin"
--#define BCM4345_NVRAM_NAME		"brcm/brcmfmac4345-sdio.txt"
-+#define BCM43455_FIRMWARE_NAME		"brcm/brcmfmac43455-sdio.bin"
-+#define BCM43455_NVRAM_NAME		"brcm/brcmfmac43455-sdio.txt"
- #define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
- 
-@@ -644,8 +644,8 @@ MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43455_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
- 
-@@ -676,7 +676,7 @@ static const struct brcmf_firmware_names
- 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
- 	{ BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
--	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
-+	{ BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) },
- 	{ BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
- 
diff --git a/package/kernel/mac80211/patches/352-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch b/package/kernel/mac80211/patches/352-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch
deleted file mode 100644
index a62cfdf..0000000
--- a/package/kernel/mac80211/patches/352-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:28 +0100
-Subject: [PATCH] brcmfmac: remove support for unreleased BCM4354 PCIe
-
-There are no known BCM4354 PCIe devices released so removing
-support from the driver until proven otherwise.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -47,8 +47,6 @@ enum brcmf_pcie_state {
- 
- #define BRCMF_PCIE_43602_FW_NAME		"brcm/brcmfmac43602-pcie.bin"
- #define BRCMF_PCIE_43602_NVRAM_NAME		"brcm/brcmfmac43602-pcie.txt"
--#define BRCMF_PCIE_4354_FW_NAME			"brcm/brcmfmac4354-pcie.bin"
--#define BRCMF_PCIE_4354_NVRAM_NAME		"brcm/brcmfmac4354-pcie.txt"
- #define BRCMF_PCIE_4356_FW_NAME			"brcm/brcmfmac4356-pcie.bin"
- #define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
-@@ -187,8 +185,6 @@ enum brcmf_pcie_state {
- 
- MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
-@@ -1327,10 +1323,6 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_43602_FW_NAME;
- 		nvram_name = BRCMF_PCIE_43602_NVRAM_NAME;
- 		break;
--	case BRCM_CC_4354_CHIP_ID:
--		fw_name = BRCMF_PCIE_4354_FW_NAME;
--		nvram_name = BRCMF_PCIE_4354_NVRAM_NAME;
--		break;
- 	case BRCM_CC_4356_CHIP_ID:
- 		fw_name = BRCMF_PCIE_4356_FW_NAME;
- 		nvram_name = BRCMF_PCIE_4356_NVRAM_NAME;
-@@ -1855,7 +1847,6 @@ cleanup:
- 	PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
- 
- static struct pci_device_id brcmf_pcie_devid_table[] = {
--	BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
diff --git a/package/kernel/mac80211/patches/353-brcmfmac-disable-MBSS-feature-for-BCM43362.patch b/package/kernel/mac80211/patches/353-brcmfmac-disable-MBSS-feature-for-BCM43362.patch
deleted file mode 100644
index 366ff85..0000000
--- a/package/kernel/mac80211/patches/353-brcmfmac-disable-MBSS-feature-for-BCM43362.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Fri, 20 Mar 2015 22:18:17 +0100
-Subject: [PATCH] brcmfmac: disable MBSS feature for BCM43362
-
-The BCM43362 firmware falsely reports it is capable of providing
-MBSS. As a result AP mode no longer works for this device. Therefor
-disable MBSS in the driver for this chipset.
-
-Cc: stable@vger.kernel.org # 3.19.y
-Reported-by: Jorg Krause <jkrause@posteo.de>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -126,7 +126,8 @@ void brcmf_feat_attach(struct brcmf_pub
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
- 	if (drvr->bus_if->wowl_supported)
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
--	brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
-+		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
- 
- 	/* set chip related quirks */
- 	switch (drvr->bus_if->chip) {
diff --git a/package/kernel/mac80211/patches/354-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch b/package/kernel/mac80211/patches/354-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch
deleted file mode 100644
index 6e461f6..0000000
--- a/package/kernel/mac80211/patches/354-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:24 +0200
-Subject: [PATCH] brcmfmac: use static superset of channels for wiphy
- bands
-
-The driver was constructing a list of channels per wiphy band
-by querying the device. This list is not what the hardware is
-able to do as it is already filtered by the country setting in
-the device. As user-space may change the country this would
-require updating the channel list which is not recommended [1].
-This patch introduces a superset of channels. The individual
-channels are disabled appropriately by querying the device.
-
-[1] http://mid.gmane.org/1426706320.3001.21.camel@sipsolutions.net
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -129,13 +129,47 @@ static struct ieee80211_rate __wl_rates[
- 	RATETAB_ENT(BRCM_RATE_54M, 0),
- };
- 
--#define wl_a_rates		(__wl_rates + 4)
--#define wl_a_rates_size	8
- #define wl_g_rates		(__wl_rates + 0)
--#define wl_g_rates_size	12
-+#define wl_g_rates_size		ARRAY_SIZE(__wl_rates)
-+#define wl_a_rates		(__wl_rates + 4)
-+#define wl_a_rates_size		(wl_g_rates_size - 4)
-+
-+#define CHAN2G(_channel, _freq) {				\
-+	.band			= IEEE80211_BAND_2GHZ,		\
-+	.center_freq		= (_freq),			\
-+	.hw_value		= (_channel),			\
-+	.flags			= IEEE80211_CHAN_DISABLED,	\
-+	.max_antenna_gain	= 0,				\
-+	.max_power		= 30,				\
-+}
-+
-+#define CHAN5G(_channel) {					\
-+	.band			= IEEE80211_BAND_5GHZ,		\
-+	.center_freq		= 5000 + (5 * (_channel)),	\
-+	.hw_value		= (_channel),			\
-+	.flags			= IEEE80211_CHAN_DISABLED,	\
-+	.max_antenna_gain	= 0,				\
-+	.max_power		= 30,				\
-+}
-+
-+static struct ieee80211_channel __wl_2ghz_channels[] = {
-+	CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
-+	CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
-+	CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
-+	CHAN2G(13, 2472), CHAN2G(14, 2484)
-+};
-+
-+static struct ieee80211_channel __wl_5ghz_channels[] = {
-+	CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
-+	CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
-+	CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
-+	CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
-+	CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
-+	CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
-+};
- 
- /* Band templates duplicated per wiphy. The channel info
-- * is filled in after querying the device.
-+ * above is added to the band during setup.
-  */
- static const struct ieee80211_supported_band __wl_band_2ghz = {
- 	.band = IEEE80211_BAND_2GHZ,
-@@ -143,7 +177,7 @@ static const struct ieee80211_supported_
- 	.n_bitrates = wl_g_rates_size,
- };
- 
--static const struct ieee80211_supported_band __wl_band_5ghz_a = {
-+static const struct ieee80211_supported_band __wl_band_5ghz = {
- 	.band = IEEE80211_BAND_5GHZ,
- 	.bitrates = wl_a_rates,
- 	.n_bitrates = wl_a_rates_size,
-@@ -5252,40 +5286,6 @@ dongle_scantime_out:
- 	return err;
- }
- 
--/* Filter the list of channels received from firmware counting only
-- * the 20MHz channels. The wiphy band data only needs those which get
-- * flagged to indicate if they can take part in higher bandwidth.
-- */
--static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
--				       struct brcmf_chanspec_list *chlist,
--				       u32 chcnt[])
--{
--	u32 total = le32_to_cpu(chlist->count);
--	struct brcmu_chan ch;
--	int i;
--
--	for (i = 0; i < total; i++) {
--		ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
--		cfg->d11inf.decchspec(&ch);
--
--		/* Firmware gives a ordered list. We skip non-20MHz
--		 * channels is 2G. For 5G we can abort upon reaching
--		 * a non-20MHz channel in the list.
--		 */
--		if (ch.bw != BRCMU_CHAN_BW_20) {
--			if (ch.band == BRCMU_CHAN_BAND_5G)
--				break;
--			else
--				continue;
--		}
--
--		if (ch.band == BRCMU_CHAN_BAND_2G)
--			chcnt[0] += 1;
--		else if (ch.band == BRCMU_CHAN_BAND_5G)
--			chcnt[1] += 1;
--	}
--}
--
- static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
- 					   struct brcmu_chan *ch)
- {
-@@ -5321,7 +5321,6 @@ static int brcmf_construct_chaninfo(stru
- 	u32 i, j;
- 	u32 total;
- 	u32 chaninfo;
--	u32 chcnt[2] = { 0, 0 };
- 	u32 index;
- 
- 	pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
-@@ -5338,42 +5337,15 @@ static int brcmf_construct_chaninfo(stru
- 		goto fail_pbuf;
- 	}
- 
--	brcmf_count_20mhz_channels(cfg, list, chcnt);
- 	wiphy = cfg_to_wiphy(cfg);
--	if (chcnt[0]) {
--		band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
--			       GFP_KERNEL);
--		if (band == NULL) {
--			err = -ENOMEM;
--			goto fail_pbuf;
--		}
--		band->channels = kcalloc(chcnt[0], sizeof(*channel),
--					 GFP_KERNEL);
--		if (band->channels == NULL) {
--			kfree(band);
--			err = -ENOMEM;
--			goto fail_pbuf;
--		}
--		band->n_channels = 0;
--		wiphy->bands[IEEE80211_BAND_2GHZ] = band;
--	}
--	if (chcnt[1]) {
--		band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a),
--			       GFP_KERNEL);
--		if (band == NULL) {
--			err = -ENOMEM;
--			goto fail_band2g;
--		}
--		band->channels = kcalloc(chcnt[1], sizeof(*channel),
--					 GFP_KERNEL);
--		if (band->channels == NULL) {
--			kfree(band);
--			err = -ENOMEM;
--			goto fail_band2g;
--		}
--		band->n_channels = 0;
--		wiphy->bands[IEEE80211_BAND_5GHZ] = band;
--	}
-+	band = wiphy->bands[IEEE80211_BAND_2GHZ];
-+	if (band)
-+		for (i = 0; i < band->n_channels; i++)
-+			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
-+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
-+	if (band)
-+		for (i = 0; i < band->n_channels; i++)
-+			band->channels[i].flags = IEEE80211_CHAN_DISABLED;
- 
- 	total = le32_to_cpu(list->count);
- 	for (i = 0; i < total; i++) {
-@@ -5388,6 +5360,8 @@ static int brcmf_construct_chaninfo(stru
- 			brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
- 			continue;
- 		}
-+		if (!band)
-+			continue;
- 		if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
- 		    ch.bw == BRCMU_CHAN_BW_40)
- 			continue;
-@@ -5415,9 +5389,9 @@ static int brcmf_construct_chaninfo(stru
- 		} else if (ch.bw == BRCMU_CHAN_BW_40) {
- 			brcmf_update_bw40_channel_flag(&channel[index], &ch);
- 		} else {
--			/* disable other bandwidths for now as mentioned
--			 * order assure they are enabled for subsequent
--			 * chanspecs.
-+			/* enable the channel and disable other bandwidths
-+			 * for now as mentioned order assure they are enabled
-+			 * for subsequent chanspecs.
- 			 */
- 			channel[index].flags = IEEE80211_CHAN_NO_HT40 |
- 					       IEEE80211_CHAN_NO_80MHZ;
-@@ -5436,16 +5410,8 @@ static int brcmf_construct_chaninfo(stru
- 						IEEE80211_CHAN_NO_IR;
- 			}
- 		}
--		if (index == band->n_channels)
--			band->n_channels++;
- 	}
--	kfree(pbuf);
--	return 0;
- 
--fail_band2g:
--	kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
--	kfree(wiphy->bands[IEEE80211_BAND_2GHZ]);
--	wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
- fail_pbuf:
- 	kfree(pbuf);
- 	return err;
-@@ -5778,7 +5744,12 @@ static void brcmf_wiphy_wowl_params(stru
- 
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
-+	struct ieee80211_supported_band *band;
- 	struct ieee80211_iface_combination ifc_combo;
-+	__le32 bandlist[3];
-+	u32 n_bands;
-+	int err, i;
-+
- 	wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- 	wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- 	wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
-@@ -5820,7 +5791,52 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
- 		brcmf_wiphy_wowl_params(wiphy);
- 
--	return brcmf_setup_wiphybands(wiphy);
-+	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
-+				     sizeof(bandlist));
-+	if (err) {
-+		brcmf_err("could not obtain band info: err=%d\n", err);
-+		return err;
-+	}
-+	/* first entry in bandlist is number of bands */
-+	n_bands = le32_to_cpu(bandlist[0]);
-+	for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
-+		if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
-+			band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
-+				       GFP_KERNEL);
-+			if (!band)
-+				return -ENOMEM;
-+
-+			band->channels = kmemdup(&__wl_2ghz_channels,
-+						 sizeof(__wl_2ghz_channels),
-+						 GFP_KERNEL);
-+			if (!band->channels) {
-+				kfree(band);
-+				return -ENOMEM;
-+			}
-+
-+			band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
-+			wiphy->bands[IEEE80211_BAND_2GHZ] = band;
-+		}
-+		if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
-+			band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
-+				       GFP_KERNEL);
-+			if (!band)
-+				return -ENOMEM;
-+
-+			band->channels = kmemdup(&__wl_5ghz_channels,
-+						 sizeof(__wl_5ghz_channels),
-+						 GFP_KERNEL);
-+			if (!band->channels) {
-+				kfree(band);
-+				return -ENOMEM;
-+			}
-+
-+			band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
-+			wiphy->bands[IEEE80211_BAND_5GHZ] = band;
-+		}
-+	}
-+	err = brcmf_setup_wiphybands(wiphy);
-+	return err;
- }
- 
- static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
-@@ -6011,6 +6027,9 @@ static void brcmf_cfg80211_reg_notifier(
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
- {
-+	if (!wiphy)
-+		return;
-+
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/355-brcmfmac-update-wiphy-band-information-upon-updating.patch b/package/kernel/mac80211/patches/355-brcmfmac-update-wiphy-band-information-upon-updating.patch
deleted file mode 100644
index a0c22eb..0000000
--- a/package/kernel/mac80211/patches/355-brcmfmac-update-wiphy-band-information-upon-updating.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:25 +0200
-Subject: [PATCH] brcmfmac: update wiphy band information upon updating
- regulatory domain
-
-When change the country code the available channels may change. So
-the wiphy bands should be updated accordingly.
-
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6022,7 +6022,11 @@ static void brcmf_cfg80211_reg_notifier(
- 	memset(&ccreq, 0, sizeof(ccreq));
- 	ccreq.rev = cpu_to_le32(-1);
- 	memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
--	brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
-+	if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
-+		brcmf_err("firmware rejected country setting\n");
-+		return;
-+	}
-+	brcmf_setup_wiphybands(wiphy);
- }
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
diff --git a/package/kernel/mac80211/patches/356-brcmfmac-add-description-for-feature-flags.patch b/package/kernel/mac80211/patches/356-brcmfmac-add-description-for-feature-flags.patch
deleted file mode 100644
index 193f507..0000000
--- a/package/kernel/mac80211/patches/356-brcmfmac-add-description-for-feature-flags.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:26 +0200
-Subject: [PATCH] brcmfmac: add description for feature flags
-
-Some feature flags were not described in the header file. Adding
-the description.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -19,7 +19,9 @@
- /*
-  * Features:
-  *
-+ * MBSS: multiple BSSID support (eg. guest network in AP mode).
-  * MCHAN: multi-channel for concurrent P2P.
-+ * WOWL: Wake-On-WLAN.
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
diff --git a/package/kernel/mac80211/patches/357-brcmfmac-make-scheduled-scan-support-conditional.patch b/package/kernel/mac80211/patches/357-brcmfmac-make-scheduled-scan-support-conditional.patch
deleted file mode 100644
index 42330b4..0000000
--- a/package/kernel/mac80211/patches/357-brcmfmac-make-scheduled-scan-support-conditional.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:27 +0200
-Subject: [PATCH] brcmfmac: make scheduled scan support conditional
-
-The scheduled scan support depends on firmware supporting the PNO
-feature. This feature is optional so add a feature flag for this
-in the driver and announce scheduled scan support accordingly.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5782,7 +5782,8 @@ static int brcmf_setup_wiphy(struct wiph
- 		wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
- 	wiphy->mgmt_stypes = brcmf_txrx_stypes;
- 	wiphy->max_remain_on_channel_duration = 5000;
--	brcmf_wiphy_pno_params(wiphy);
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
-+		brcmf_wiphy_pno_params(wiphy);
- 
- 	/* vendor commands/events support */
- 	wiphy->vendor_commands = brcmf_vendor_cmds;
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -124,6 +124,7 @@ void brcmf_feat_attach(struct brcmf_pub
- 	struct brcmf_if *ifp = drvr->iflist[0];
- 
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
-+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
- 	if (drvr->bus_if->wowl_supported)
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- 	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -21,11 +21,13 @@
-  *
-  * MBSS: multiple BSSID support (eg. guest network in AP mode).
-  * MCHAN: multi-channel for concurrent P2P.
-+ * PNO: preferred network offload.
-  * WOWL: Wake-On-WLAN.
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
- 	BRCMF_FEAT_DEF(MCHAN) \
-+	BRCMF_FEAT_DEF(PNO) \
- 	BRCMF_FEAT_DEF(WOWL)
- /*
-  * Quirks:
diff --git a/package/kernel/mac80211/patches/358-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch b/package/kernel/mac80211/patches/358-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch
deleted file mode 100644
index b859d46..0000000
--- a/package/kernel/mac80211/patches/358-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:28 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4324 rev B5 chipset
-
-This patch adds support for the BCM4324 B5 revision. This device
-is similar to BCM43241 from driver and firmware perspective. It
-is known to be used in Lenovo Thinkpad Tablet devices.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -601,6 +601,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43241B0_NVRAM_NAME		"brcm/brcmfmac43241b0-sdio.txt"
- #define BCM43241B4_FIRMWARE_NAME	"brcm/brcmfmac43241b4-sdio.bin"
- #define BCM43241B4_NVRAM_NAME		"brcm/brcmfmac43241b4-sdio.txt"
-+#define BCM43241B5_FIRMWARE_NAME	"brcm/brcmfmac43241b5-sdio.bin"
-+#define BCM43241B5_NVRAM_NAME		"brcm/brcmfmac43241b5-sdio.txt"
- #define BCM4329_FIRMWARE_NAME		"brcm/brcmfmac4329-sdio.bin"
- #define BCM4329_NVRAM_NAME		"brcm/brcmfmac4329-sdio.txt"
- #define BCM4330_FIRMWARE_NAME		"brcm/brcmfmac4330-sdio.bin"
-@@ -628,6 +630,8 @@ MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME
- MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
-@@ -667,7 +671,8 @@ enum brcmf_firmware_type {
- static const struct brcmf_firmware_names brcmf_fwname_data[] = {
- 	{ BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
- 	{ BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
--	{ BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+	{ BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+	{ BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) },
- 	{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
- 	{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
- 	{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
diff --git a/package/kernel/mac80211/patches/359-brcmfmac-process-interrupt-regardless-sdiod-state.patch b/package/kernel/mac80211/patches/359-brcmfmac-process-interrupt-regardless-sdiod-state.patch
deleted file mode 100644
index d420308..0000000
--- a/package/kernel/mac80211/patches/359-brcmfmac-process-interrupt-regardless-sdiod-state.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:29 +0200
-Subject: [PATCH] brcmfmac: process interrupt regardless sdiod state
-
-When the sdio bus state is not ready to process we abort the
-interrupt service routine. This is not wanted as it keeps the
-interrupt source active. Better clear the interrupt source.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3555,10 +3555,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- 		return;
- 	}
- 
--	if (bus->sdiodev->state != BRCMF_SDIOD_DATA) {
--		brcmf_err("bus is down. we have nothing to do\n");
--		return;
--	}
- 	/* Count the interrupt call */
- 	bus->sdcnt.intrcount++;
- 	if (in_interrupt())
diff --git a/package/kernel/mac80211/patches/360-brcmfmac-fix-sdio-suspend-and-resume.patch b/package/kernel/mac80211/patches/360-brcmfmac-fix-sdio-suspend-and-resume.patch
deleted file mode 100644
index ac5584e..0000000
--- a/package/kernel/mac80211/patches/360-brcmfmac-fix-sdio-suspend-and-resume.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:30 +0200
-Subject: [PATCH] brcmfmac: fix sdio suspend and resume
-
-commit 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.")
-changed the behaviour by removing the MMC_PM_KEEP_POWER flag for
-non-wowl scenario, which needs to be restored. Another necessary
-change is to mark the card as being non-removable. With this in place
-the suspend resume test passes successfully doing:
-
- # echo devices > /sys/power/pm_test
- # echo mem > /sys/power/state
-
-Note that power may still be switched off when system is going
-in S3 state.
-
-Reported-by: Fu, Zhonghui <<zhonghui.fu@linux.intel.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1011,6 +1011,14 @@ static int brcmf_sdiod_remove(struct brc
- 	return 0;
- }
- 
-+static void brcmf_sdiod_host_fixup(struct mmc_host *host)
-+{
-+	/* runtime-pm powers off the device */
-+	pm_runtime_forbid(host->parent);
-+	/* avoid removal detection upon resume */
-+	host->caps |= MMC_CAP_NONREMOVABLE;
-+}
-+
- static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
- {
- 	struct sdio_func *func;
-@@ -1076,7 +1084,7 @@ static int brcmf_sdiod_probe(struct brcm
- 		ret = -ENODEV;
- 		goto out;
- 	}
--	pm_runtime_forbid(host->parent);
-+	brcmf_sdiod_host_fixup(host);
- out:
- 	if (ret)
- 		brcmf_sdiod_remove(sdiodev);
-@@ -1246,15 +1254,15 @@ static int brcmf_ops_sdio_suspend(struct
- 	brcmf_sdiod_freezer_on(sdiodev);
- 	brcmf_sdio_wd_timer(sdiodev->bus, 0);
- 
-+	sdio_flags = MMC_PM_KEEP_POWER;
- 	if (sdiodev->wowl_enabled) {
--		sdio_flags = MMC_PM_KEEP_POWER;
- 		if (sdiodev->pdata->oob_irq_supported)
- 			enable_irq_wake(sdiodev->pdata->oob_irq_nr);
- 		else
--			sdio_flags = MMC_PM_WAKE_SDIO_IRQ;
--		if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
--			brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
-+			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
- 	}
-+	if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
-+		brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
- 	return 0;
- }
- 
diff --git a/package/kernel/mac80211/patches/361-brcmfmac-add-support-for-BCM4358-PCIe-device.patch b/package/kernel/mac80211/patches/361-brcmfmac-add-support-for-BCM4358-PCIe-device.patch
deleted file mode 100644
index a521b65..0000000
--- a/package/kernel/mac80211/patches/361-brcmfmac-add-support-for-BCM4358-PCIe-device.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:31 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4358 PCIe device
-
-This patch adds support for the BCM4358 2x2 11ac device.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -649,6 +649,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- 	case BRCM_CC_43567_CHIP_ID:
- 	case BRCM_CC_43569_CHIP_ID:
- 	case BRCM_CC_43570_CHIP_ID:
-+	case BRCM_CC_4358_CHIP_ID:
- 	case BRCM_CC_43602_CHIP_ID:
- 		return 0x180000;
- 	default:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -51,6 +51,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_4356_NVRAM_NAME		"brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME		"brcm/brcmfmac43570-pcie.bin"
- #define BRCMF_PCIE_43570_NVRAM_NAME		"brcm/brcmfmac43570-pcie.txt"
-+#define BRCMF_PCIE_4358_FW_NAME			"brcm/brcmfmac4358-pcie.bin"
-+#define BRCMF_PCIE_4358_NVRAM_NAME		"brcm/brcmfmac4358-pcie.txt"
- 
- #define BRCMF_PCIE_FW_UP_TIMEOUT		2000 /* msec */
- 
-@@ -189,6 +191,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME)
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
- 
- 
- struct brcmf_pcie_console {
-@@ -1333,6 +1337,10 @@ static int brcmf_pcie_get_fwnames(struct
- 		fw_name = BRCMF_PCIE_43570_FW_NAME;
- 		nvram_name = BRCMF_PCIE_43570_NVRAM_NAME;
- 		break;
-+	case BRCM_CC_4358_CHIP_ID:
-+		fw_name = BRCMF_PCIE_4358_FW_NAME;
-+		nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
-+		break;
- 	default:
- 		brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
- 		return -ENODEV;
-@@ -1850,6 +1858,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -45,6 +45,7 @@
- #define BRCM_CC_43567_CHIP_ID		43567
- #define BRCM_CC_43569_CHIP_ID		43569
- #define BRCM_CC_43570_CHIP_ID		43570
-+#define BRCM_CC_4358_CHIP_ID		0x4358
- #define BRCM_CC_43602_CHIP_ID		43602
- 
- /* USB Device IDs */
-@@ -59,6 +60,7 @@
- #define BRCM_PCIE_4356_DEVICE_ID	0x43ec
- #define BRCM_PCIE_43567_DEVICE_ID	0x43d3
- #define BRCM_PCIE_43570_DEVICE_ID	0x43d9
-+#define BRCM_PCIE_4358_DEVICE_ID	0x43e9
- #define BRCM_PCIE_43602_DEVICE_ID	0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
diff --git a/package/kernel/mac80211/patches/362-brcmfmac-add-additional-43602-pcie-device-id.patch b/package/kernel/mac80211/patches/362-brcmfmac-add-additional-43602-pcie-device-id.patch
deleted file mode 100644
index bcbb984..0000000
--- a/package/kernel/mac80211/patches/362-brcmfmac-add-additional-43602-pcie-device-id.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:32 +0200
-Subject: [PATCH] brcmfmac: add additional 43602 pcie device id.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1862,6 +1862,7 @@ static struct pci_device_id brcmf_pcie_d
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
-+	BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID),
- 	{ /* end: all zeroes */ }
- };
- 
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -64,6 +64,7 @@
- #define BRCM_PCIE_43602_DEVICE_ID	0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID	0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID	0x43bc
-+#define BRCM_PCIE_43602_RAW_DEVICE_ID	43602
- 
- /* brcmsmac IDs */
- #define BCM4313_D11N2G_ID	0x4727	/* 4313 802.11n 2.4G device */
diff --git a/package/kernel/mac80211/patches/363-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch b/package/kernel/mac80211/patches/363-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch
deleted file mode 100644
index 5f9bbea..0000000
--- a/package/kernel/mac80211/patches/363-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:33 +0200
-Subject: [PATCH] brcmfmac: Add support for multiple PCIE devices in
- nvram.
-
-With PCIE it is possible to support multiple devices with the
-same device type. They all load the same nvram file. In order to
-support this the nvram can specify which part of the nvram is
-for which pcie device. This patch adds support for these new
-types of nvram files.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -23,6 +23,10 @@
- #include "debug.h"
- #include "firmware.h"
- 
-+#define BRCMF_FW_MAX_NVRAM_SIZE			64000
-+#define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN		9	/* pcie/1/4/ */
-+
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
- 		    BRCMF_FW_PATH_LEN, 0440);
-@@ -46,6 +50,8 @@ enum nvram_parser_state {
-  * @column: current column in line.
-  * @pos: byte offset in input buffer.
-  * @entry: start position of key,value entry.
-+ * @multi_dev_v1: detect pcie multi device v1 (compressed).
-+ * @multi_dev_v2: detect pcie multi device v2.
-  */
- struct nvram_parser {
- 	enum nvram_parser_state state;
-@@ -56,6 +62,8 @@ struct nvram_parser {
- 	u32 column;
- 	u32 pos;
- 	u32 entry;
-+	bool multi_dev_v1;
-+	bool multi_dev_v2;
- };
- 
- static bool is_nvram_char(char c)
-@@ -108,6 +116,10 @@ static enum nvram_parser_state brcmf_nvr
- 			st = COMMENT;
- 		else
- 			st = VALUE;
-+		if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+			nvp->multi_dev_v1 = true;
-+		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+			nvp->multi_dev_v2 = true;
- 	} else if (!is_nvram_char(c)) {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- 			  nvp->line, nvp->column);
-@@ -133,6 +145,8 @@ brcmf_nvram_handle_value(struct nvram_pa
- 		ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
- 		skv = (u8 *)&nvp->fwnv->data[nvp->entry];
- 		cplen = ekv - skv;
-+		if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
-+			return END;
- 		/* copy to output buffer */
- 		memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen);
- 		nvp->nvram_len += cplen;
-@@ -180,10 +194,18 @@ static enum nvram_parser_state
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
- 				   const struct firmware *nv)
- {
-+	size_t size;
-+
- 	memset(nvp, 0, sizeof(*nvp));
- 	nvp->fwnv = nv;
-+	/* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
-+	if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+		size = BRCMF_FW_MAX_NVRAM_SIZE;
-+	else
-+		size = nv->size;
- 	/* Alloc for extra 0 byte + roundup by 4 + length field */
--	nvp->nvram = kzalloc(nv->size + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	size += 1 + 3 + sizeof(u32);
-+	nvp->nvram = kzalloc(size, GFP_KERNEL);
- 	if (!nvp->nvram)
- 		return -ENOMEM;
- 
-@@ -192,12 +214,136 @@ static int brcmf_init_nvram_parser(struc
- 	return 0;
- }
- 
-+/* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v1 is the version where nvram is stored
-+ * compressed and "devpath" maps to index for valid entries.
-+ */
-+static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
-+				    u16 bus_nr)
-+{
-+	u32 i, j;
-+	bool found;
-+	u8 *nvram;
-+	u8 id;
-+
-+	nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	if (!nvram)
-+		goto fail;
-+
-+	/* min length: devpath0=pcie/1/4/ + 0:x=y */
-+	if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6)
-+		goto fail;
-+
-+	/* First search for the devpathX and see if it is the configuration
-+	 * for domain_nr/bus_nr. Search complete nvp
-+	 */
-+	found = false;
-+	i = 0;
-+	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-+		/* Format: devpathX=pcie/Y/Z/
-+		 * Y = domain_nr, Z = bus_nr, X = virtual ID
-+		 */
-+		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
-+		    (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
-+			if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
-+			    ((nvp->nvram[i + 16] - '0') == bus_nr)) {
-+				id = nvp->nvram[i + 7] - '0';
-+				found = true;
-+				break;
-+			}
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	if (!found)
-+		goto fail;
-+
-+	/* Now copy all valid entries, release old nvram and assign new one */
-+	i = 0;
-+	j = 0;
-+	while (i < nvp->nvram_len) {
-+		if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) {
-+			i += 2;
-+			while (nvp->nvram[i] != 0) {
-+				nvram[j] = nvp->nvram[i];
-+				i++;
-+				j++;
-+			}
-+			nvram[j] = 0;
-+			j++;
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	kfree(nvp->nvram);
-+	nvp->nvram = nvram;
-+	nvp->nvram_len = j;
-+	return;
-+
-+fail:
-+	kfree(nvram);
-+	nvp->nvram_len = 0;
-+}
-+
-+/* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v2 is the version where nvram is stored
-+ * uncompressed, all relevant valid entries are identified by
-+ * pcie/domain_nr/bus_nr:
-+ */
-+static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
-+				    u16 bus_nr)
-+{
-+	u32 i, j;
-+	u8 *nvram;
-+
-+	nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+	if (!nvram)
-+		goto fail;
-+
-+	/* Copy all valid entries, release old nvram and assign new one.
-+	 * Valid entries are of type pcie/X/Y/ where X = domain_nr and
-+	 * Y = bus_nr.
-+	 */
-+	i = 0;
-+	j = 0;
-+	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
-+		if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
-+		    (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
-+		    ((nvp->nvram[i + 5] - '0') == domain_nr) &&
-+		    ((nvp->nvram[i + 7] - '0') == bus_nr)) {
-+			i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+			while (nvp->nvram[i] != 0) {
-+				nvram[j] = nvp->nvram[i];
-+				i++;
-+				j++;
-+			}
-+			nvram[j] = 0;
-+			j++;
-+		}
-+		while (nvp->nvram[i] != 0)
-+			i++;
-+		i++;
-+	}
-+	kfree(nvp->nvram);
-+	nvp->nvram = nvram;
-+	nvp->nvram_len = j;
-+	return;
-+fail:
-+	kfree(nvram);
-+	nvp->nvram_len = 0;
-+}
-+
- /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
-  * and ending in a NUL. Removes carriage returns, empty lines, comment lines,
-  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
-  * End of buffer is completed with token identifying length of buffer.
-  */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length)
-+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
-+				  u16 domain_nr, u16 bus_nr)
- {
- 	struct nvram_parser nvp;
- 	u32 pad;
-@@ -212,6 +358,16 @@ static void *brcmf_fw_nvram_strip(const
- 		if (nvp.state == END)
- 			break;
- 	}
-+	if (nvp.multi_dev_v1)
-+		brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr);
-+	else if (nvp.multi_dev_v2)
-+		brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr);
-+
-+	if (nvp.nvram_len == 0) {
-+		kfree(nvp.nvram);
-+		return NULL;
-+	}
-+
- 	pad = nvp.nvram_len;
- 	*new_length = roundup(nvp.nvram_len + 1, 4);
- 	while (pad != *new_length) {
-@@ -239,6 +395,8 @@ struct brcmf_fw {
- 	u16 flags;
- 	const struct firmware *code;
- 	const char *nvram_name;
-+	u16 domain_nr;
-+	u16 bus_nr;
- 	void (*done)(struct device *dev, const struct firmware *fw,
- 		     void *nvram_image, u32 nvram_len);
- };
-@@ -254,7 +412,8 @@ static void brcmf_fw_request_nvram_done(
- 		goto fail;
- 
- 	if (fw) {
--		nvram = brcmf_fw_nvram_strip(fw, &nvram_length);
-+		nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+					     fwctx->domain_nr, fwctx->bus_nr);
- 		release_firmware(fw);
- 		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
- 			goto fail;
-@@ -309,11 +468,12 @@ fail:
- 	kfree(fwctx);
- }
- 
--int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
--			   const char *code, const char *nvram,
--			   void (*fw_cb)(struct device *dev,
--					 const struct firmware *fw,
--					 void *nvram_image, u32 nvram_len))
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+				const char *code, const char *nvram,
-+				void (*fw_cb)(struct device *dev,
-+					      const struct firmware *fw,
-+					      void *nvram_image, u32 nvram_len),
-+				u16 domain_nr, u16 bus_nr)
- {
- 	struct brcmf_fw *fwctx;
- 
-@@ -333,8 +493,21 @@ int brcmf_fw_get_firmwares(struct device
- 	fwctx->done = fw_cb;
- 	if (flags & BRCMF_FW_REQUEST_NVRAM)
- 		fwctx->nvram_name = nvram;
-+	fwctx->domain_nr = domain_nr;
-+	fwctx->bus_nr = bus_nr;
- 
- 	return request_firmware_nowait(THIS_MODULE, true, code, dev,
- 				       GFP_KERNEL, fwctx,
- 				       brcmf_fw_request_code_done);
- }
-+
-+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
-+			   const char *code, const char *nvram,
-+			   void (*fw_cb)(struct device *dev,
-+					 const struct firmware *fw,
-+					 void *nvram_image, u32 nvram_len))
-+{
-+	return brcmf_fw_get_firmwares_pcie(dev, flags, code, nvram, fw_cb, 0,
-+					   0);
-+}
-+
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-@@ -32,6 +32,12 @@ void brcmf_fw_nvram_free(void *nvram);
-  * fails it will not use the callback, but call device_release_driver()
-  * instead which will call the driver .remove() callback.
-  */
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+				const char *code, const char *nvram,
-+				void (*fw_cb)(struct device *dev,
-+					      const struct firmware *fw,
-+					      void *nvram_image, u32 nvram_len),
-+				u16 domain_nr, u16 bus_nr);
- int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
- 			   const char *code, const char *nvram,
- 			   void (*fw_cb)(struct device *dev,
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1649,8 +1649,13 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 	struct brcmf_pciedev_info *devinfo;
- 	struct brcmf_pciedev *pcie_bus_dev;
- 	struct brcmf_bus *bus;
-+	u16 domain_nr;
-+	u16 bus_nr;
- 
--	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
-+	domain_nr = pci_domain_nr(pdev->bus) + 1;
-+	bus_nr = pdev->bus->number;
-+	brcmf_dbg(PCIE, "Enter %x:%x (%d/%d)\n", pdev->vendor, pdev->device,
-+		  domain_nr, bus_nr);
- 
- 	ret = -ENOMEM;
- 	devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
-@@ -1699,10 +1704,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 	if (ret)
- 		goto fail_bus;
- 
--	ret = brcmf_fw_get_firmwares(bus->dev, BRCMF_FW_REQUEST_NVRAM |
--					       BRCMF_FW_REQ_NV_OPTIONAL,
--				     devinfo->fw_name, devinfo->nvram_name,
--				     brcmf_pcie_setup);
-+	ret = brcmf_fw_get_firmwares_pcie(bus->dev, BRCMF_FW_REQUEST_NVRAM |
-+						    BRCMF_FW_REQ_NV_OPTIONAL,
-+					  devinfo->fw_name, devinfo->nvram_name,
-+					  brcmf_pcie_setup, domain_nr, bus_nr);
- 	if (ret == 0)
- 		return 0;
- fail_bus:
diff --git a/package/kernel/mac80211/patches/364-brcmfmac-cleanup-a-sizeof.patch b/package/kernel/mac80211/patches/364-brcmfmac-cleanup-a-sizeof.patch
deleted file mode 100644
index d26e118..0000000
--- a/package/kernel/mac80211/patches/364-brcmfmac-cleanup-a-sizeof.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Thu, 7 May 2015 12:59:19 +0300
-Subject: [PATCH] brcmfmac: cleanup a sizeof()
-
-"flowrings" and "*flowrings" are both pointers so this always returns
-sizeof(void *) and the current code works fine.  But "*flowrings" is
-intended here and static checkers complain, so lets change it.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1617,7 +1617,7 @@ static void brcmf_pcie_setup(struct devi
- 		bus->msgbuf->commonrings[i] =
- 				&devinfo->shared.commonrings[i]->commonring;
- 
--	flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(flowrings),
-+	flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
- 			    GFP_KERNEL);
- 	if (!flowrings)
- 		goto fail;
diff --git a/package/kernel/mac80211/patches/365-brcmfmac-check-result-of-USB-firmware-request.patch b/package/kernel/mac80211/patches/365-brcmfmac-check-result-of-USB-firmware-request.patch
deleted file mode 100644
index 9b2880d..0000000
--- a/package/kernel/mac80211/patches/365-brcmfmac-check-result-of-USB-firmware-request.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 7 May 2015 14:13:03 +0200
-Subject: [PATCH] brcmfmac: check result of USB firmware request
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This prevents silence failures with driver waiting (infinitely) for a
-callback.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -1270,8 +1270,13 @@ static int brcmf_usb_probe_cb(struct brc
- 	bus->chiprev = bus_pub->chiprev;
- 
- 	/* request firmware here */
--	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
--			       brcmf_usb_probe_phase2);
-+	ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo),
-+				     NULL, brcmf_usb_probe_phase2);
-+	if (ret) {
-+		brcmf_err("firmware request failed: %d\n", ret);
-+		goto fail;
-+	}
-+
- 	return 0;
- 
- fail:
diff --git a/package/kernel/mac80211/patches/366-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch b/package/kernel/mac80211/patches/366-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch
deleted file mode 100644
index d46b300..0000000
--- a/package/kernel/mac80211/patches/366-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: "Fu, Zhonghui" <zhonghui.fu@linux.intel.com>
-Date: Mon, 11 May 2015 10:41:32 +0800
-Subject: [PATCH] brcmfmac: prohibit ACPI power management for brcmfmac driver
-
-ACPI will manage WiFi chip's power state during suspend/resume
-process on some tablet platforms(such as ASUS T100TA). This is
-not supported by brcmfmac driver now, and the context of WiFi
-chip will be damaged after resume. This patch informs ACPI not
-to manage WiFi chip's power state.
-
-Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -33,6 +33,7 @@
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-+#include <linux/acpi.h>
- #include <net/cfg80211.h>
- 
- #include <defs.h>
-@@ -1122,6 +1123,8 @@ static int brcmf_ops_sdio_probe(struct s
- 	int err;
- 	struct brcmf_sdio_dev *sdiodev;
- 	struct brcmf_bus *bus_if;
-+	struct device *dev;
-+	struct acpi_device *adev;
- 
- 	brcmf_dbg(SDIO, "Enter\n");
- 	brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1129,6 +1132,12 @@ static int brcmf_ops_sdio_probe(struct s
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
- 
-+	/* prohibit ACPI power management for this device */
-+	dev = &func->dev;
-+	adev = ACPI_COMPANION(dev);
-+	if (adev)
-+		adev->flags.power_manageable = 0;
-+
- 	/* Consume func num 1 but dont do anything with it. */
- 	if (func->num == 1)
- 		return 0;
diff --git a/package/kernel/mac80211/patches/367-brcmfmac-avoid-gcc-5.1-warning.patch b/package/kernel/mac80211/patches/367-brcmfmac-avoid-gcc-5.1-warning.patch
deleted file mode 100644
index 9b4609f..0000000
--- a/package/kernel/mac80211/patches/367-brcmfmac-avoid-gcc-5.1-warning.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 12 May 2015 23:54:25 +0200
-Subject: [PATCH] brcmfmac: avoid gcc-5.1 warning
-
-gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
-driver:
-
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
-
-This is a false positive, and marking the brcmf_fws_hanger_poppkt function
-as 'static inline' makes the warning go away. I have checked the object
-file output and while a little code gets moved around, the size of
-the binary remains identical.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -635,7 +635,7 @@ static int brcmf_fws_hanger_pushpkt(stru
- 	return 0;
- }
- 
--static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
-+static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
- 					  u32 slot_id, struct sk_buff **pktout,
- 					  bool remove_item)
- {
diff --git a/package/kernel/mac80211/patches/368-brcmfmac-allow-device-tree-node-without-interrupts-p.patch b/package/kernel/mac80211/patches/368-brcmfmac-allow-device-tree-node-without-interrupts-p.patch
deleted file mode 100644
index b16782d..0000000
--- a/package/kernel/mac80211/patches/368-brcmfmac-allow-device-tree-node-without-interrupts-p.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 20 May 2015 14:09:47 +0200
-Subject: [PATCH] brcmfmac: allow device tree node without 'interrupts'
- property
-
-As described in the device tree bindings for 'brcm,bcm4329-fmac'
-nodes, the interrupts property is optional. So adding a check
-for the presence of this property before attempting to parse
-and map the interrupt. If not present or parsing fails return
-and fallback to in-band sdio interrupt.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/of.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/of.c
-@@ -39,10 +39,16 @@ void brcmf_of_probe(struct brcmf_sdio_de
- 	if (!sdiodev->pdata)
- 		return;
- 
-+	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-+		sdiodev->pdata->drive_strength = val;
-+
-+	/* make sure there are interrupts defined in the node */
-+	if (!of_find_property(np, "interrupts", NULL))
-+		return;
-+
- 	irq = irq_of_parse_and_map(np, 0);
- 	if (!irq) {
- 		brcmf_err("interrupt could not be mapped\n");
--		devm_kfree(dev, sdiodev->pdata);
- 		return;
- 	}
- 	irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
-@@ -50,7 +56,4 @@ void brcmf_of_probe(struct brcmf_sdio_de
- 	sdiodev->pdata->oob_irq_supported = true;
- 	sdiodev->pdata->oob_irq_nr = irq;
- 	sdiodev->pdata->oob_irq_flags = irqf;
--
--	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
--		sdiodev->pdata->drive_strength = val;
- }
diff --git a/package/kernel/mac80211/patches/369-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch b/package/kernel/mac80211/patches/369-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch
deleted file mode 100644
index f81250e..0000000
--- a/package/kernel/mac80211/patches/369-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 20 May 2015 14:09:48 +0200
-Subject: [PATCH] brcmfmac: Improve throughput by scheduling msbug flow worker.
-
-The tx flow worker in msgbuf gets scheduled at tx till a certain
-threshold has been reached. Then the tx completes will take over
-the scheduling. When amsdu and ampdu is used the frames are
-transferred wireless in a very bulky fashion, in combination
-with this scheduling algorithm and buffer limiters in the stack
-this can result in limited throughput. This change causes the
-flow worker to be scheduled more frequently from tx.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -249,8 +249,8 @@ void brcmf_flowring_delete(struct brcmf_
- }
- 
- 
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
--			    struct sk_buff *skb)
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+			   struct sk_buff *skb)
- {
- 	struct brcmf_flowring_ring *ring;
- 
-@@ -271,6 +271,7 @@ void brcmf_flowring_enqueue(struct brcmf
- 		if (skb_queue_len(&ring->skblist) < BRCMF_FLOWRING_LOW)
- 			brcmf_flowring_block(flow, flowid, false);
- 	}
-+	return skb_queue_len(&ring->skblist);
- }
- 
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-@@ -64,8 +64,8 @@ u32 brcmf_flowring_create(struct brcmf_f
- void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid);
- u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid);
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
--			    struct sk_buff *skb);
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+			   struct sk_buff *skb);
- struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
- 			     struct sk_buff *skb);
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -73,7 +73,7 @@
- #define BRCMF_MSGBUF_TX_FLUSH_CNT1		32
- #define BRCMF_MSGBUF_TX_FLUSH_CNT2		96
- 
--#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	64
-+#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
- 
- struct msgbuf_common_hdr {
-@@ -797,6 +797,8 @@ static int brcmf_msgbuf_txdata(struct br
- 	struct brcmf_flowring *flow = msgbuf->flow;
- 	struct ethhdr *eh = (struct ethhdr *)(skb->data);
- 	u32 flowid;
-+	u32 queue_count;
-+	bool force;
- 
- 	flowid = brcmf_flowring_lookup(flow, eh->h_dest, skb->priority, ifidx);
- 	if (flowid == BRCMF_FLOWRING_INVALID_ID) {
-@@ -804,8 +806,9 @@ static int brcmf_msgbuf_txdata(struct br
- 		if (flowid == BRCMF_FLOWRING_INVALID_ID)
- 			return -ENOMEM;
- 	}
--	brcmf_flowring_enqueue(flow, flowid, skb);
--	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, false);
-+	queue_count = brcmf_flowring_enqueue(flow, flowid, skb);
-+	force = ((queue_count % BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS) == 0);
-+	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, force);
- 
- 	return 0;
- }
diff --git a/package/kernel/mac80211/patches/370-brcmfmac-remove-pci-shared-structure-rev4-support.patch b/package/kernel/mac80211/patches/370-brcmfmac-remove-pci-shared-structure-rev4-support.patch
deleted file mode 100644
index 61153c4..0000000
--- a/package/kernel/mac80211/patches/370-brcmfmac-remove-pci-shared-structure-rev4-support.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:49 +0200
-Subject: [PATCH] brcmfmac: remove pci shared structure rev4 support
-
-All pcie full dongle chips supported by fmac are using rev 5+ shared
-structure. This patch removes the rev4 related code.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -112,10 +112,9 @@ enum brcmf_pcie_state {
- 						 BRCMF_PCIE_MB_INT_D2H3_DB0 | \
- 						 BRCMF_PCIE_MB_INT_D2H3_DB1)
- 
--#define BRCMF_PCIE_MIN_SHARED_VERSION		4
-+#define BRCMF_PCIE_MIN_SHARED_VERSION		5
- #define BRCMF_PCIE_MAX_SHARED_VERSION		5
- #define BRCMF_PCIE_SHARED_VERSION_MASK		0x00FF
--#define BRCMF_PCIE_SHARED_TXPUSH_SUPPORT	0x4000
- 
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT		0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT		0x8000
-@@ -1280,11 +1279,6 @@ brcmf_pcie_init_share_ram_info(struct br
- 		brcmf_err("Unsupported PCIE version %d\n", version);
- 		return -EINVAL;
- 	}
--	if (shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT) {
--		brcmf_err("Unsupported legacy TX mode 0x%x\n",
--			  shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT);
--		return -EINVAL;
--	}
- 
- 	addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- 	shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
diff --git a/package/kernel/mac80211/patches/371-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch b/package/kernel/mac80211/patches/371-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch
deleted file mode 100644
index 8c8eebe..0000000
--- a/package/kernel/mac80211/patches/371-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:50 +0200
-Subject: [PATCH] brcmfmac: remove dummy cache flush/invalidate function
-
-brcmf_dma_flush and brcmf_dma_invalidate_cache are not necessary and
-have never been implemented.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -22,17 +22,6 @@
- #include "core.h"
- #include "commonring.h"
- 
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- * SEE ALSO msgbuf.c
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- void brcmf_commonring_register_cb(struct brcmf_commonring *commonring,
- 				  int (*cr_ring_bell)(void *ctx),
- 				  int (*cr_update_rptr)(void *ctx),
-@@ -206,14 +195,9 @@ int brcmf_commonring_write_complete(stru
- 	address = commonring->buf_addr;
- 	address += (commonring->f_ptr * commonring->item_len);
- 	if (commonring->f_ptr > commonring->w_ptr) {
--		brcmf_dma_flush(address,
--				(commonring->depth - commonring->f_ptr) *
--				commonring->item_len);
- 		address = commonring->buf_addr;
- 		commonring->f_ptr = 0;
- 	}
--	brcmf_dma_flush(address, (commonring->w_ptr - commonring->f_ptr) *
--			commonring->item_len);
- 
- 	commonring->f_ptr = commonring->w_ptr;
- 
-@@ -258,8 +242,6 @@ void *brcmf_commonring_get_read_ptr(stru
- 	if (commonring->r_ptr == commonring->depth)
- 		commonring->r_ptr = 0;
- 
--	brcmf_dma_invalidate_cache(ret_addr, *n_ items * commonring->item_len);
--
- 	return ret_addr;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -278,16 +278,6 @@ struct brcmf_msgbuf_pktids {
- 	struct brcmf_msgbuf_pktid *array;
- };
- 
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static void brcmf_msgbuf_rxbuf_ioctlresp_post(struct brcmf_msgbuf *msgbuf);
- 
- 
-@@ -462,7 +452,6 @@ static int brcmf_msgbuf_tx_ioctl(struct
- 		memcpy(msgbuf->ioctbuf, buf, buf_len);
- 	else
- 		memset(msgbuf->ioctbuf, 0, buf_len);
--	brcmf_dma_flush(ioctl_buf, buf_len);
- 
- 	err = brcmf_commonring_write_complete(commonring);
- 	brcmf_commonring_unlock(commonring);
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -276,15 +276,6 @@ static const u32 brcmf_ring_itemsize[BRC
- };
- 
- 
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static u32
- brcmf_pcie_read_reg32(struct brcmf_pciedev_info *devinfo, u32 reg_offset)
- {
-@@ -1174,7 +1165,6 @@ static int brcmf_pcie_init_scratchbuffer
- 		goto fail;
- 
- 	memset(devinfo->shared.scratch, 0, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
--	brcmf_dma_flush(devinfo->shared.scratch, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
- 
- 	addr = devinfo->shared.tcm_base_address +
- 	       BRCMF_SHARED_DMA_SCRATCH_ADDR_OFFSET;
-@@ -1192,7 +1182,6 @@ static int brcmf_pcie_init_scratchbuffer
- 		goto fail;
- 
- 	memset(devinfo->shared.ringupd, 0, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
--	brcmf_dma_flush(devinfo->shared.ringupd, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
- 
- 	addr = devinfo->shared.tcm_base_address +
- 	       BRCMF_SHARED_DMA_RINGUPD_ADDR_OFFSET;
diff --git a/package/kernel/mac80211/patches/372-brcmfmac-add-support-for-dma-indices-feature.patch b/package/kernel/mac80211/patches/372-brcmfmac-add-support-for-dma-indices-feature.patch
deleted file mode 100644
index 2f50abd..0000000
--- a/package/kernel/mac80211/patches/372-brcmfmac-add-support-for-dma-indices-feature.patch
+++ /dev/null
@@ -1,270 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:51 +0200
-Subject: [PATCH] brcmfmac: add support for dma indices feature
-
-PCIe full dongle firmware can support a dma indices feature with which
-firmware can update/fetch the read/write indices of message buffer
-rings on both host to dongle and dongle to host directions. The support is
-announced by firmware through shared flags.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -115,6 +115,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_MIN_SHARED_VERSION		5
- #define BRCMF_PCIE_MAX_SHARED_VERSION		5
- #define BRCMF_PCIE_SHARED_VERSION_MASK		0x00FF
-+#define BRCMF_PCIE_SHARED_DMA_INDEX		0x10000
-+#define BRCMF_PCIE_SHARED_DMA_2B_IDX		0x100000
- 
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT		0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT		0x8000
-@@ -146,6 +148,10 @@ enum brcmf_pcie_state {
- #define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET	8
- #define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET	12
- #define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET	16
-+#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET	20
-+#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET	28
-+#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET	36
-+#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET	44
- #define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET	0
- #define BRCMF_SHARED_RING_MAX_SUB_QUEUES	52
- 
-@@ -247,6 +253,13 @@ struct brcmf_pciedev_info {
- 	bool mbdata_completed;
- 	bool irq_allocated;
- 	bool wowl_enabled;
-+	u8 dma_idx_sz;
-+	void *idxbuf;
-+	u32 idxbuf_sz;
-+	dma_addr_t idxbuf_dmahandle;
-+	u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
-+	void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+			  u16 value);
- };
- 
- struct brcmf_pcie_ringbuf {
-@@ -323,6 +336,25 @@ brcmf_pcie_write_tcm16(struct brcmf_pcie
- }
- 
- 
-+static u16
-+brcmf_pcie_read_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
-+{
-+	u16 *address = devinfo->idxbuf + mem_offset;
-+
-+	return (*(address));
-+}
-+
-+
-+static void
-+brcmf_pcie_write_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+		     u16 value)
-+{
-+	u16 *address = devinfo->idxbuf + mem_offset;
-+
-+	*(address) = value;
-+}
-+
-+
- static u32
- brcmf_pcie_read_tcm32(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
- {
-@@ -868,7 +900,7 @@ static int brcmf_pcie_ring_mb_write_rptr
- 	brcmf_dbg(PCIE, "W r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- 		  commonring->w_ptr, ring->id);
- 
--	brcmf_pcie_write_tcm16(devinfo, ring->r_idx_addr, commonring->r_ptr);
-+	devinfo->write_ptr(devinfo, ring->r_idx_addr, commonring->r_ptr);
- 
- 	return 0;
- }
-@@ -886,7 +918,7 @@ static int brcmf_pcie_ring_mb_write_wptr
- 	brcmf_dbg(PCIE, "W w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- 		  commonring->r_ptr, ring->id);
- 
--	brcmf_pcie_write_tcm16(devinfo, ring->w_idx_addr, commonring->w_ptr);
-+	devinfo->write_ptr(devinfo, ring->w_idx_addr, commonring->w_ptr);
- 
- 	return 0;
- }
-@@ -915,7 +947,7 @@ static int brcmf_pcie_ring_mb_update_rpt
- 	if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- 		return -EIO;
- 
--	commonring->r_ptr = brcmf_pcie_read_tcm16(devinfo, ring->r_idx_addr);
-+	commonring->r_ptr = devinfo->read_ptr(devinfo, ring->r_idx_addr);
- 
- 	brcmf_dbg(PCIE, "R r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- 		  commonring->w_ptr, ring->id);
-@@ -933,7 +965,7 @@ static int brcmf_pcie_ring_mb_update_wpt
- 	if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- 		return -EIO;
- 
--	commonring->w_ptr = brcmf_pcie_read_tcm16(devinfo, ring->w_idx_addr);
-+	commonring->w_ptr = devinfo->read_ptr(devinfo, ring->w_idx_addr);
- 
- 	brcmf_dbg(PCIE, "R w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- 		  commonring->r_ptr, ring->id);
-@@ -1038,6 +1070,13 @@ static void brcmf_pcie_release_ringbuffe
- 	}
- 	kfree(devinfo->shared.flowrings);
- 	devinfo->shared.flowrings = NULL;
-+	if (devinfo->idxbuf) {
-+		dma_free_coherent(&devinfo->pdev->dev,
-+				  devinfo->idxbuf_sz,
-+				  devinfo->idxbuf,
-+				  devinfo->idxbuf_dmahandle);
-+		devinfo->idxbuf = NULL;
-+	}
- }
- 
- 
-@@ -1053,19 +1092,72 @@ static int brcmf_pcie_init_ringbuffers(s
- 	u32 addr;
- 	u32 ring_mem_ptr;
- 	u32 i;
-+	u64 address;
-+	u32 bufsz;
- 	u16 max_sub_queues;
-+	u8 idx_offset;
- 
- 	ring_addr = devinfo->shared.ring_info_addr;
- 	brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
-+	addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
-+	max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
- 
--	addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
--	d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
--	d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
--	h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
--	addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
--	h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+	if (devinfo->dma_idx_sz != 0) {
-+		bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
-+			devinfo->dma_idx_sz * 2;
-+		devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
-+						     &devinfo->idxbuf_dmahandle,
-+						     GFP_KERNEL);
-+		if (!devinfo->idxbuf)
-+			devinfo->dma_idx_sz = 0;
-+	}
-+
-+	if (devinfo->dma_idx_sz == 0) {
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
-+		d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
-+		d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
-+		h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
-+		h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+		idx_offset = sizeof(u32);
-+		devinfo->write_ptr = brcmf_pcie_write_tcm16;
-+		devinfo->read_ptr = brcmf_pcie_read_tcm16;
-+		brcmf_dbg(PCIE, "Using TCM indices\n");
-+	} else {
-+		memset(devinfo->idxbuf, 0, bufsz);
-+		devinfo->idxbuf_sz = bufsz;
-+		idx_offset = devinfo->dma_idx_sz;
-+		devinfo->write_ptr = brcmf_pcie_write_idx;
-+		devinfo->read_ptr = brcmf_pcie_read_idx;
-+
-+		h2d_w_idx_ptr = 0;
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
-+		address = (u64)devinfo->idxbuf_dmahandle;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
-+		address += max_sub_queues * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
-+		address += max_sub_queues * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+		d2h_r_idx_ptr = d2h_w_idx_ptr +
-+				BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+		addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
-+		address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+		brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+		brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+		brcmf_dbg(PCIE, "Using host memory indices\n");
-+	}
- 
- 	addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
- 	ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-@@ -1079,8 +1171,8 @@ static int brcmf_pcie_init_ringbuffers(s
- 		ring->id = i;
- 		devinfo->shared.commonrings[i] = ring;
- 
--		h2d_w_idx_ptr += sizeof(u32);
--		h2d_r_idx_ptr += sizeof(u32);
-+		h2d_w_idx_ptr += idx_offset;
-+		h2d_r_idx_ptr += idx_offset;
- 		ring_mem_ptr += BRCMF_RING_MEM_SZ;
- 	}
- 
-@@ -1094,13 +1186,11 @@ static int brcmf_pcie_init_ringbuffers(s
- 		ring->id = i;
- 		devinfo->shared.commonrings[i] = ring;
- 
--		d2h_w_idx_ptr += sizeof(u32);
--		d2h_r_idx_ptr += sizeof(u32);
-+		d2h_w_idx_ptr += idx_offset;
-+		d2h_r_idx_ptr += idx_offset;
- 		ring_mem_ptr += BRCMF_RING_MEM_SZ;
- 	}
- 
--	addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
--	max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
- 	devinfo->shared.nrof_flowrings =
- 			max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
- 	rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
-@@ -1124,15 +1214,15 @@ static int brcmf_pcie_init_ringbuffers(s
- 					     ring);
- 		ring->w_idx_addr = h2d_w_idx_ptr;
- 		ring->r_idx_addr = h2d_r_idx_ptr;
--		h2d_w_idx_ptr += sizeof(u32);
--		h2d_r_idx_ptr += sizeof(u32);
-+		h2d_w_idx_ptr += idx_offset;
-+		h2d_r_idx_ptr += idx_offset;
- 	}
- 	devinfo->shared.flowrings = rings;
- 
- 	return 0;
- 
- fail:
--	brcmf_err("Allocating commonring buffers failed\n");
-+	brcmf_err("Allocating ring buffers failed\n");
- 	brcmf_pcie_release_ringbuffers(devinfo);
- 	return -ENOMEM;
- }
-@@ -1269,6 +1359,14 @@ brcmf_pcie_init_share_ram_info(struct br
- 		return -EINVAL;
- 	}
- 
-+	/* check firmware support dma indicies */
-+	if (shared->flags & BRCMF_PCIE_SHARED_DMA_INDEX) {
-+		if (shared->flags & BRCMF_PCIE_SHARED_DMA_2B_IDX)
-+			devinfo->dma_idx_sz = sizeof(u16);
-+		else
-+			devinfo->dma_idx_sz = sizeof(u32);
-+	}
-+
- 	addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- 	shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
- 	if (shared->max_rxbufpost == 0)
diff --git a/package/kernel/mac80211/patches/373-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch b/package/kernel/mac80211/patches/373-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch
deleted file mode 100644
index 28408d2..0000000
--- a/package/kernel/mac80211/patches/373-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 26 May 2015 13:19:46 +0200
-Subject: [PATCH] brcmfmac: avoid null pointer access when
- brcmf_msgbuf_get_pktid() fails
-
-The function brcmf_msgbuf_get_pktid() may return a NULL pointer so
-the callers should check the return pointer before accessing it to
-avoid the crash below (see [1]):
-
-brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use)
-BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
-IP: [<ffffffff8145b225>] skb_pull+0x5/0x50
-PGD 0
-Oops: 0000 [#1] PREEMPT SMP
-Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O)
- snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache
- jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd
- usbcore usb_common
-CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O    4.0.1-MacbookPro-ARCH #1
-Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6,
- BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015
-task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000
-RIP: 0010:[<ffffffff8145b225>]  [<ffffffff8145b225>] skb_pull+0x5/0x50
-RSP: 0018:ffff88025ffe7d40  EFLAGS: 00010202
-RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044
-RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000
-RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a
-R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00
-R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000
-FS:  0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000
-CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0
-Stack:
- ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278
- 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0
- ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0
-Call Trace:
- [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac]
- [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0
- [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac]
- [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac]
- [<ffffffff810cea80>] irq_thread_fn+0x20/0x50
- [<ffffffff810ceddf>] irq_thread+0x13f/0x170
- [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30
- [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0
- [<ffffffff81092a08>] kthread+0xd8/0xf0
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
- [<ffffffff8156d898>] ret_from_fork+0x58/0x90
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
-Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2
- f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f
-RIP  [<ffffffff8145b225>] skb_pull+0x5/0x50
- RSP <ffff88025ffe7d40>
-CR2: 0000000000000080
----[ end trace b074c0f90e7c997d ]---
-
-[1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com
-
-Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1
-Reported-by: Michael Hornung <mhornung.linux@gmail.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -500,11 +500,9 @@ static int brcmf_msgbuf_query_dcmd(struc
- 				     msgbuf->rx_pktids,
- 				     msgbuf->ioctl_resp_pktid);
- 	if (msgbuf->ioctl_resp_ret_len != 0) {
--		if (!skb) {
--			brcmf_err("Invalid packet id idx recv'd %d\n",
--				  msgbuf->ioctl_resp_pktid);
-+		if (!skb)
- 			return -EBADF;
--		}
-+
- 		memcpy(buf, skb->data, (len < msgbuf->ioctl_resp_ret_len) ?
- 				       len : msgbuf->ioctl_resp_ret_len);
- 	}
-@@ -866,10 +864,8 @@ brcmf_msgbuf_process_txstatus(struct brc
- 	flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
- 	skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- 				     msgbuf->tx_pktids, idx);
--	if (!skb) {
--		brcmf_err("Invalid packet id idx recv'd %d\n", idx);
-+	if (!skb)
- 		return;
--	}
- 
- 	set_bit(flowid, msgbuf->txstatus_done_map);
- 	commonring = msgbuf->flowrings[flowid];
-@@ -1148,6 +1144,8 @@ brcmf_msgbuf_process_rx_complete(struct
- 
- 	skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- 				     msgbuf->rx_pktids, idx);
-+	if (!skb)
-+		return;
- 
- 	if (data_offset)
- 		skb_pull(skb, data_offset);
diff --git a/package/kernel/mac80211/patches/374-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch b/package/kernel/mac80211/patches/374-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch
deleted file mode 100644
index f023034..0000000
--- a/package/kernel/mac80211/patches/374-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 27 May 2015 19:31:41 +0200
-Subject: [PATCH] brcmfmac: fix invalid access to struct acpi_device fields
-
-The fields of struct acpi_device are only known when CONFIG_ACPI is
-defined. Fix this by using a helper function. This will resolve the
-issue found in linux-next:
-
- ../brcmfmac/bcmsdh.c: In function 'brcmf_ops_sdio_probe':
- ../brcmfmac/bcmsdh.c:1139:7: error: dereferencing pointer to incomplete type
-   adev->flags.power_manageable = 0;
-       ^
-
-Fixes: f0992ace680c ("brcmfmac: prohibit ACPI power management ...")
-Cc: Fu, Zhonghui <zhonghui.fu@linux.intel.com>
-Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1117,6 +1117,18 @@ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_id
- static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
- 
- 
-+static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev,
-+						  int val)
-+{
-+#if IS_ENABLED(CONFIG_ACPI)
-+	struct acpi_device *adev;
-+
-+	adev = ACPI_COMPANION(dev);
-+	if (adev)
-+		adev->flags.power_manageable = 0;
-+#endif
-+}
-+
- static int brcmf_ops_sdio_probe(struct sdio_func *func,
- 				const struct sdio_device_id *id)
- {
-@@ -1124,7 +1136,6 @@ static int brcmf_ops_sdio_probe(struct s
- 	struct brcmf_sdio_dev *sdiodev;
- 	struct brcmf_bus *bus_if;
- 	struct device *dev;
--	struct acpi_device *adev;
- 
- 	brcmf_dbg(SDIO, "Enter\n");
- 	brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1132,11 +1143,9 @@ static int brcmf_ops_sdio_probe(struct s
- 	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- 	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
- 
--	/* prohibit ACPI power management for this device */
- 	dev = &func->dev;
--	adev = ACPI_COMPANION(dev);
--	if (adev)
--		adev->flags.power_manageable = 0;
-+	/* prohibit ACPI power management for this device */
-+	brcmf_sdiod_acpi_set_power_manageable(dev, 0);
- 
- 	/* Consume func num 1 but dont do anything with it. */
- 	if (func->num == 1)
diff --git a/package/kernel/mac80211/patches/375-brcmfmac-simplify-check-stripping-v2-NVRAM.patch b/package/kernel/mac80211/patches/375-brcmfmac-simplify-check-stripping-v2-NVRAM.patch
deleted file mode 100644
index 2bfd44f..0000000
--- a/package/kernel/mac80211/patches/375-brcmfmac-simplify-check-stripping-v2-NVRAM.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 09:34:21 +0200
-Subject: [PATCH] brcmfmac: simplify check stripping v2 NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Comparing NVRAM entry with a full filtering string is simpler than
-comparing it with a short prefix and then checking random chars at magic
-offsets. The cost of snprintf relatively low, we execute it just once.
-Tested on BCM43602 with NVRAM hacked to use V2 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -25,7 +25,7 @@
- 
- #define BRCMF_FW_MAX_NVRAM_SIZE			64000
- #define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
--#define BRCMF_FW_NVRAM_PCIEDEV_LEN		9	/* pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
- 
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
-@@ -297,6 +297,8 @@ fail:
- static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
- 				    u16 bus_nr)
- {
-+	char prefix[BRCMF_FW_NVRAM_PCIEDEV_LEN];
-+	size_t len;
- 	u32 i, j;
- 	u8 *nvram;
- 
-@@ -308,14 +310,13 @@ static void brcmf_fw_strip_multi_v2(stru
- 	 * Valid entries are of type pcie/X/Y/ where X = domain_nr and
- 	 * Y = bus_nr.
- 	 */
-+	snprintf(prefix, sizeof(prefix), "pcie/%d/%d/", domain_nr, bus_nr);
-+	len = strlen(prefix);
- 	i = 0;
- 	j = 0;
--	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
--		if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
--		    (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
--		    ((nvp->nvram[i + 5] - '0') == domain_nr) &&
--		    ((nvp->nvram[i + 7] - '0') == bus_nr)) {
--			i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+	while (i < nvp->nvram_len - len) {
-+		if (strncmp(&nvp->nvram[i], prefix, len) == 0) {
-+			i += len;
- 			while (nvp->nvram[i] != 0) {
- 				nvram[j] = nvp->nvram[i];
- 				i++;
diff --git a/package/kernel/mac80211/patches/376-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch b/package/kernel/mac80211/patches/376-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch
deleted file mode 100644
index 0e65114..0000000
--- a/package/kernel/mac80211/patches/376-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 11:01:08 +0200
-Subject: [PATCH] brcmfmac: simplify check finding NVRAM v1 device path
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With a simple use of snprintf and small buffer we can compare NVRAM
-entry value with a full string. This way we avoid checking random chars
-at magic offsets.
-Tested on BCM43602 with NVRAM hacked to use v1 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -222,6 +222,10 @@ static int brcmf_init_nvram_parser(struc
- static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
- 				    u16 bus_nr)
- {
-+	/* Device path with a leading '=' key-value separator */
-+	char pcie_path[] = "=pcie/?/?";
-+	size_t pcie_len;
-+
- 	u32 i, j;
- 	bool found;
- 	u8 *nvram;
-@@ -238,6 +242,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 	/* First search for the devpathX and see if it is the configuration
- 	 * for domain_nr/bus_nr. Search complete nvp
- 	 */
-+	snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
-+		 bus_nr);
-+	pcie_len = strlen(pcie_path);
- 	found = false;
- 	i = 0;
- 	while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-@@ -245,13 +252,10 @@ static void brcmf_fw_strip_multi_v1(stru
- 		 * Y = domain_nr, Z = bus_nr, X = virtual ID
- 		 */
- 		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
--		    (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
--			if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
--			    ((nvp->nvram[i + 16] - '0') == bus_nr)) {
--				id = nvp->nvram[i + 7] - '0';
--				found = true;
--				break;
--			}
-+		    (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+			id = nvp->nvram[i + 7] - '0';
-+			found = true;
-+			break;
- 		}
- 		while (nvp->nvram[i] != 0)
- 			i++;
diff --git a/package/kernel/mac80211/patches/377-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch b/package/kernel/mac80211/patches/377-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch
deleted file mode 100644
index dc174e5..0000000
--- a/package/kernel/mac80211/patches/377-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 13:59:54 +0200
-Subject: [PATCH] brcmfmac: treat \0 as end of comment when parsing NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes brcmfmac dealing with NVRAM coming from platform e.g. from a
-flash MTD partition. In such cases entries are separated by \0 instead
-of \n which caused ignoring whole content after the first "comment".
-While platform NVRAM doesn't usually contain comments, we switch to
-COMMENT state after e.g. finding an unexpected char in key name.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -162,17 +162,20 @@ brcmf_nvram_handle_value(struct nvram_pa
- static enum nvram_parser_state
- brcmf_nvram_handle_comment(struct nvram_parser *nvp)
- {
--	char *eol, *sol;
-+	char *eoc, *sol;
- 
- 	sol = (char *)&nvp->fwnv->data[nvp->pos];
--	eol = strchr(sol, '\n');
--	if (eol == NULL)
--		return END;
-+	eoc = strchr(sol, '\n');
-+	if (!eoc) {
-+		eoc = strchr(sol, '\0');
-+		if (!eoc)
-+			return END;
-+	}
- 
- 	/* eat all moving to next line */
- 	nvp->line++;
- 	nvp->column = 1;
--	nvp->pos += (eol - sol) + 1;
-+	nvp->pos += (eoc - sol) + 1;
- 	return IDLE;
- }
- 
diff --git a/package/kernel/mac80211/patches/378-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch b/package/kernel/mac80211/patches/378-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch
deleted file mode 100644
index 5700142..0000000
--- a/package/kernel/mac80211/patches/378-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 23 May 2015 09:15:33 +0200
-Subject: [PATCH] brcmfmac: allow NVRAM values to contain spaces
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Platform NVRAMs often contain values with spaces. Even if right now most
-firmware-supported entries are simple values, we shouldn't reject these
-with spaces. It was semi-confirmed by Broadcom in the early patch adding
-support for platform NVRAMs.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -66,6 +66,12 @@ struct nvram_parser {
- 	bool multi_dev_v2;
- };
- 
-+/**
-+ * is_nvram_char() - check if char is a valid one for NVRAM entry
-+ *
-+ * It accepts all printable ASCII chars except for '#' which opens a comment.
-+ * Please note that ' ' (space) while accepted is not a valid key name char.
-+ */
- static bool is_nvram_char(char c)
- {
- 	/* comment marker excluded */
-@@ -73,7 +79,7 @@ static bool is_nvram_char(char c)
- 		return false;
- 
- 	/* key and value may have any other readable character */
--	return (c > 0x20 && c < 0x7f);
-+	return (c >= 0x20 && c < 0x7f);
- }
- 
- static bool is_whitespace(char c)
-@@ -120,7 +126,7 @@ static enum nvram_parser_state brcmf_nvr
- 			nvp->multi_dev_v1 = true;
- 		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
- 			nvp->multi_dev_v2 = true;
--	} else if (!is_nvram_char(c)) {
-+	} else if (!is_nvram_char(c) || c == ' ') {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- 			  nvp->line, nvp->column);
- 		return COMMENT;
diff --git a/package/kernel/mac80211/patches/379-ath9k-fix-DMA-stop-sequence-for-AR9003.patch b/package/kernel/mac80211/patches/379-ath9k-fix-DMA-stop-sequence-for-AR9003.patch
deleted file mode 100644
index 814b0d7..0000000
--- a/package/kernel/mac80211/patches/379-ath9k-fix-DMA-stop-sequence-for-AR9003.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 2 Jun 2015 10:35:46 +0200
-Subject: [PATCH] ath9k: fix DMA stop sequence for AR9003+
-
-AR93xx and newer needs to stop rx before tx to avoid getting the DMA
-engine or MAC into a stuck state.
-This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -216,11 +216,13 @@ static bool ath_prepare_reset(struct ath
- 	ath_stop_ani(sc);
- 	ath9k_hw_disable_interrupts(ah);
- 
--	if (!ath_drain_all_txq(sc))
--		ret = false;
--
--	if (!ath_stoprecv(sc))
--		ret = false;
-+	if (AR_SREV_9300_20_OR_LATER(ah)) {
-+		ret &= ath_stoprecv(sc);
-+		ret &= ath_drain_all_txq(sc);
-+	} else {
-+		ret &= ath_drain_all_txq(sc);
-+		ret &= ath_stoprecv(sc);
-+	}
- 
- 	return ret;
- }
diff --git a/package/kernel/mac80211/patches/380-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch b/package/kernel/mac80211/patches/380-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch
deleted file mode 100644
index 7bbd57e..0000000
--- a/package/kernel/mac80211/patches/380-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 28 May 2015 14:19:21 +0200
-Subject: [PATCH] brcmfmac: support NVRAMs containing pci devpaths (instead of
- pcie)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Recently Broadcom added support for NVRAMs with entries for multiple
-PCIe devices. One of the supported formats is based on prefixes defined
-like: devpath0=pcie/1/4/ and entries like 0:foo=bar 0:baz=qux etc.
-
-Unfortunately there are also a bit older devices using different way of
-defining prefixes, e.g. SmartRG SR400ac (2 x BCM43602) with entries:
-devpath0=pci/1/1/
-devpath1=pci/2/1
-Broadcom stated this old format will never be used/supported by brcmfmac
-but given the simplicity of this patch I'll insist on supporting it.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -232,6 +232,8 @@ static void brcmf_fw_strip_multi_v1(stru
- 				    u16 bus_nr)
- {
- 	/* Device path with a leading '=' key-value separator */
-+	char pci_path[] = "=pci/?/?";
-+	size_t pci_len;
- 	char pcie_path[] = "=pcie/?/?";
- 	size_t pcie_len;
- 
-@@ -251,6 +253,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 	/* First search for the devpathX and see if it is the configuration
- 	 * for domain_nr/bus_nr. Search complete nvp
- 	 */
-+	snprintf(pci_path, sizeof(pci_path), "=pci/%d/%d", domain_nr,
-+		 bus_nr);
-+	pci_len = strlen(pci_path);
- 	snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
- 		 bus_nr);
- 	pcie_len = strlen(pcie_path);
-@@ -260,8 +265,9 @@ static void brcmf_fw_strip_multi_v1(stru
- 		/* Format: devpathX=pcie/Y/Z/
- 		 * Y = domain_nr, Z = bus_nr, X = virtual ID
- 		 */
--		if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
--		    (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+		if (strncmp(&nvp->nvram[i], "devpath", 7) == 0 &&
-+		    (!strncmp(&nvp->nvram[i + 8], pci_path, pci_len) ||
-+		     !strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len))) {
- 			id = nvp->nvram[i + 7] - '0';
- 			found = true;
- 			break;
diff --git a/package/kernel/mac80211/patches/381-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch b/package/kernel/mac80211/patches/381-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch
deleted file mode 100644
index 1eff6ed..0000000
--- a/package/kernel/mac80211/patches/381-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 31 May 2015 02:52:26 +0200
-Subject: [PATCH] brcmfmac: set wiphy perm_addr to hardware MAC address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows e.g. user space to use /sys/class/ieee80211/*/macaddress
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6070,6 +6070,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- 		brcmf_err("Could not allocate wiphy device\n");
- 		return NULL;
- 	}
-+	memcpy(wiphy->perm_addr, drvr->mac, ETH_ALEN);
- 	set_wiphy_dev(wiphy, busdev);
- 
- 	cfg = wiphy_priv(wiphy);
diff --git a/package/kernel/mac80211/patches/382-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch b/package/kernel/mac80211/patches/382-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch
deleted file mode 100644
index c6e83dd..0000000
--- a/package/kernel/mac80211/patches/382-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Jun 2015 22:11:07 +0200
-Subject: [PATCH] brcmfmac: use direct data pointer in NVRAM parser struct
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-As we plan to add support for platform NVRAM we should store direct
-data pointer without the extra struct firmware layer. This will allow
-us to support other sources with the only requirement being u8 buffer.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -43,7 +43,7 @@ enum nvram_parser_state {
-  * struct nvram_parser - internal info for parser.
-  *
-  * @state: current parser state.
-- * @fwnv: input buffer being parsed.
-+ * @data: input buffer being parsed.
-  * @nvram: output buffer with parse result.
-  * @nvram_len: lenght of parse result.
-  * @line: current line.
-@@ -55,7 +55,7 @@ enum nvram_parser_state {
-  */
- struct nvram_parser {
- 	enum nvram_parser_state state;
--	const struct firmware *fwnv;
-+	const u8 *data;
- 	u8 *nvram;
- 	u32 nvram_len;
- 	u32 line;
-@@ -91,7 +91,7 @@ static enum nvram_parser_state brcmf_nvr
- {
- 	char c;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (c == '\n')
- 		return COMMENT;
- 	if (is_whitespace(c))
-@@ -115,16 +115,16 @@ static enum nvram_parser_state brcmf_nvr
- 	enum nvram_parser_state st = nvp->state;
- 	char c;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (c == '=') {
- 		/* ignore RAW1 by treating as comment */
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "RAW1", 4) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "RAW1", 4) == 0)
- 			st = COMMENT;
- 		else
- 			st = VALUE;
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "devpath", 7) == 0)
- 			nvp->multi_dev_v1 = true;
--		if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+		if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0)
- 			nvp->multi_dev_v2 = true;
- 	} else if (!is_nvram_char(c) || c == ' ') {
- 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
-@@ -145,11 +145,11 @@ brcmf_nvram_handle_value(struct nvram_pa
- 	char *ekv;
- 	u32 cplen;
- 
--	c = nvp->fwnv->data[nvp->pos];
-+	c = nvp->data[nvp->pos];
- 	if (!is_nvram_char(c)) {
- 		/* key,value pair complete */
--		ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
--		skv = (u8 *)&nvp->fwnv->data[nvp->entry];
-+		ekv = (u8 *)&nvp->data[nvp->pos];
-+		skv = (u8 *)&nvp->data[nvp->entry];
- 		cplen = ekv - skv;
- 		if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
- 			return END;
-@@ -170,7 +170,7 @@ brcmf_nvram_handle_comment(struct nvram_
- {
- 	char *eoc, *sol;
- 
--	sol = (char *)&nvp->fwnv->data[nvp->pos];
-+	sol = (char *)&nvp->data[nvp->pos];
- 	eoc = strchr(sol, '\n');
- 	if (!eoc) {
- 		eoc = strchr(sol, '\0');
-@@ -201,17 +201,17 @@ static enum nvram_parser_state
- };
- 
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
--				   const struct firmware *nv)
-+				   const u8 *data, size_t data_len)
- {
- 	size_t size;
- 
- 	memset(nvp, 0, sizeof(*nvp));
--	nvp->fwnv = nv;
-+	nvp->data = data;
- 	/* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
--	if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+	if (data_len > BRCMF_FW_MAX_NVRAM_SIZE)
- 		size = BRCMF_FW_MAX_NVRAM_SIZE;
- 	else
--		size = nv->size;
-+		size = data_len;
- 	/* Alloc for extra 0 byte + roundup by 4 + length field */
- 	size += 1 + 3 + sizeof(u32);
- 	nvp->nvram = kzalloc(size, GFP_KERNEL);
-@@ -362,18 +362,18 @@ fail:
-  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
-  * End of buffer is completed with token identifying length of buffer.
-  */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
--				  u16 domain_nr, u16 bus_nr)
-+static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len,
-+				  u32 *new_length, u16 domain_nr, u16 bus_nr)
- {
- 	struct nvram_parser nvp;
- 	u32 pad;
- 	u32 token;
- 	__le32 token_le;
- 
--	if (brcmf_init_nvram_parser(&nvp, nv) < 0)
-+	if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0)
- 		return NULL;
- 
--	while (nvp.pos < nv->size) {
-+	while (nvp.pos < data_len) {
- 		nvp.state = nv_parser_states[nvp.state](&nvp);
- 		if (nvp.state == END)
- 			break;
-@@ -432,7 +432,7 @@ static void brcmf_fw_request_nvram_done(
- 		goto fail;
- 
- 	if (fw) {
--		nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+		nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length,
- 					     fwctx->domain_nr, fwctx->bus_nr);
- 		release_firmware(fw);
- 		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
diff --git a/package/kernel/mac80211/patches/383-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch b/package/kernel/mac80211/patches/383-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch
deleted file mode 100644
index 4ecef3b..0000000
--- a/package/kernel/mac80211/patches/383-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 6 Jun 2015 22:45:59 +0200
-Subject: [PATCH] b43: fix support for 14e4:4321 PCI dev with BCM4321 chipset
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems Broadcom released two devices with conflicting device id. There
-are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they
-can be found in routers, e.g. Netgear WNR834Bv2. However, according to
-Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY).
-It's unsure if they meant PCI device id, or "virtual" id (from SPROM).
-To distinguish these devices lets check PHY type (G vs. N).
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: <stable@vger.kernel.org> # 3.16+
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b
- 		*have_5ghz_phy = true;
- 		return;
- 	case 0x4321: /* BCM4306 */
-+		/* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
-+		if (dev->phy.type != B43_PHYTYPE_G)
-+			break;
-+		/* fall through */
- 	case 0x4313: /* BCM4311 */
- 	case 0x431a: /* BCM4318 */
- 	case 0x432a: /* BCM4321 */
diff --git a/package/kernel/mac80211/patches/384-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/384-ath9k-force-rx_clear-when-disabling-rx.patch
deleted file mode 100644
index bddb15a..0000000
--- a/package/kernel/mac80211/patches/384-ath9k-force-rx_clear-when-disabling-rx.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 7 Jun 2015 13:53:35 +0200
-Subject: [PATCH] ath9k: force rx_clear when disabling rx
-
-This makes stopping Rx more reliable and should reduce the frequency of
-Rx related DMA stop warnings
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -677,13 +677,15 @@ void ath9k_hw_startpcureceive(struct ath
- 
- 	ath9k_ani_reset(ah, is_scanning);
- 
--	REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
-+	REG_CLR_BIT(ah, AR_DIAG_SW,
-+		    AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
- }
- EXPORT_SYMBOL(ath9k_hw_startpcureceive);
- 
- void ath9k_hw_abortpcurecv(struct ath_hw *ah)
- {
--	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
-+	REG_SET_BIT(ah, AR_DIAG_SW,
-+		    AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
- 
- 	ath9k_hw_disable_mib_counters(ah);
- }
diff --git a/package/kernel/mac80211/patches/385-ath9k_hw-fix-device-ID-check-for-AR956x.patch b/package/kernel/mac80211/patches/385-ath9k_hw-fix-device-ID-check-for-AR956x.patch
deleted file mode 100644
index 2674efb..0000000
--- a/package/kernel/mac80211/patches/385-ath9k_hw-fix-device-ID-check-for-AR956x.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 21 Jun 2015 19:45:59 +0200
-Subject: [PATCH] ath9k_hw: fix device ID check for AR956x
-
-Because of the missing return, the macVersion value was being
-overwritten with an invalid register read
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -278,6 +278,7 @@ static void ath9k_hw_read_revisions(stru
- 		return;
- 	case AR9300_DEVID_QCA956X:
- 		ah->hw_version.macVersion = AR_SREV_VERSION_9561;
-+		return;
- 	}
- 
- 	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
diff --git a/package/kernel/mac80211/patches/385-brcmfmac-Update-msgbuf-read-pointer-quicker.patch b/package/kernel/mac80211/patches/385-brcmfmac-Update-msgbuf-read-pointer-quicker.patch
deleted file mode 100644
index 74df9f9..0000000
--- a/package/kernel/mac80211/patches/385-brcmfmac-Update-msgbuf-read-pointer-quicker.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:32 +0200
-Subject: [PATCH] brcmfmac: Update msgbuf read pointer quicker.
-
-On device to host data using msgbuf the read pointer gets updated
-once all data is processed. Updating this pointer more frequently
-allows the firmware to add more data quicker. This will result in
-slightly higher and more stable throughput on CPU bounded host
-processors.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -223,8 +223,6 @@ void brcmf_commonring_write_cancel(struc
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- 				    u16 *n_items)
- {
--	void *ret_addr;
--
- 	if (commonring->cr_update_wptr)
- 		commonring->cr_update_wptr(commonring->cr_ctx);
- 
-@@ -235,19 +233,18 @@ void *brcmf_commonring_get_read_ptr(stru
- 	if (*n_items == 0)
- 		return NULL;
- 
--	ret_addr = commonring->buf_addr +
--		   (commonring->r_ptr * commonring->item_len);
--
--	commonring->r_ptr += *n_items;
--	if (commonring->r_ptr == commonring->depth)
--		commonring->r_ptr = 0;
--
--	return ret_addr;
-+	return commonring->buf_addr +
-+	       (commonring->r_ptr * commonring->item_len);
- }
- 
- 
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring)
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+				   u16 n_items)
- {
-+	commonring->r_ptr += n_items;
-+	if (commonring->r_ptr == commonring->depth)
-+		commonring->r_ptr = 0;
-+
- 	if (commonring->cr_write_rptr)
- 		return commonring->cr_write_rptr(commonring->cr_ctx);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-@@ -62,7 +62,8 @@ void brcmf_commonring_write_cancel(struc
- 				   u16 n_items);
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- 				    u16 *n_items);
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring);
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+				   u16 n_items);
- 
- #define brcmf_commonring_n_items(commonring) (commonring->depth)
- #define brcmf_commonring_len_item(commonring) (commonring->item_len)
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -75,6 +75,8 @@
- 
- #define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
-+#define BRCMF_MSGBUF_UPDATE_RX_PTR_THRS		48
-+
- 
- struct msgbuf_common_hdr {
- 	u8				msgtype;
-@@ -1257,19 +1259,27 @@ static void brcmf_msgbuf_process_rx(stru
- {
- 	void *buf;
- 	u16 count;
-+	u16 processed;
- 
- again:
- 	buf = brcmf_commonring_get_read_ptr(commonring, &count);
- 	if (buf == NULL)
- 		return;
- 
-+	processed = 0;
- 	while (count) {
- 		brcmf_msgbuf_process_msgtype(msgbuf,
- 					     buf + msgbuf->rx_dataoffset);
- 		buf += brcmf_commonring_len_item(commonring);
-+		processed++;
-+		if (processed == BRCMF_MSGBUF_UPDATE_RX_PTR_THRS) {
-+			brcmf_commonring_read_complete(commonring, processed);
-+			processed = 0;
-+		}
- 		count--;
- 	}
--	brcmf_commonring_read_complete(commonring);
-+	if (processed)
-+		brcmf_commonring_read_complete(commonring, processed);
- 
- 	if (commonring->r_ptr == 0)
- 		goto again;
diff --git a/package/kernel/mac80211/patches/386-brcmfmac-remove-chipinfo-debugfs-entry.patch b/package/kernel/mac80211/patches/386-brcmfmac-remove-chipinfo-debugfs-entry.patch
deleted file mode 100644
index 9e5b486..0000000
--- a/package/kernel/mac80211/patches/386-brcmfmac-remove-chipinfo-debugfs-entry.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:33 +0200
-Subject: [PATCH] brcmfmac: remove chipinfo debugfs entry
-
-The information provided by chipinfo is also provided by the
-revinfo debugfs entry. Removing it from debugfs.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -41,15 +41,6 @@ void brcmf_debugfs_exit(void)
- 	root_folder = NULL;
- }
- 
--static int brcmf_debugfs_chipinfo_read(struct seq_file *seq, void *data)
--{
--	struct brcmf_bus *bus = dev_get_drvdata(seq->private);
--
--	seq_printf(seq, "chip: %x(%u) rev %u\n",
--		   bus->chip, bus->chip, bus->chiprev);
--	return 0;
--}
--
- int brcmf_debugfs_attach(struct brcmf_pub *drvr)
- {
- 	struct device *dev = drvr->bus_if->dev;
-@@ -58,7 +49,6 @@ int brcmf_debugfs_attach(struct brcmf_pu
- 		return -ENODEV;
- 
- 	drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder);
--	brcmf_debugfs_add_entry(drvr, "chipinfo", brcmf_debugfs_chipinfo_read);
- 
- 	return PTR_ERR_OR_ZERO(drvr->dbgfs_dir);
- }
diff --git a/package/kernel/mac80211/patches/387-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch b/package/kernel/mac80211/patches/387-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch
deleted file mode 100644
index c38b2cd..0000000
--- a/package/kernel/mac80211/patches/387-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:34 +0200
-Subject: [PATCH] brcmfmac: remove watchdog reset from
- brcmf_pcie_buscoreprep()
-
-The watchdog reset as done in brcmf_pcie_buscoreprep() is not
-sufficient. It needs to modify PCIe core registers as well
-which is properly done by brcmf_pcie_reset_device() after the
-chip recognition is done. So the faulty watchdog reset can be
-removed as it was causing driver reload to fail and hang the
-system requiring a power-cycle. Instead the call to to the
-brcmf_pcie_reset_device() function is done twice in the unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1629,20 +1629,7 @@ static void brcmf_pcie_buscore_write32(v
- 
- static int brcmf_pcie_buscoreprep(void *ctx)
- {
--	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
--	int err;
--
--	err = brcmf_pcie_get_resource(devinfo);
--	if (err == 0) {
--		/* Set CC watchdog to reset all the cores on the chip to bring
--		 * back dongle to a sane state.
--		 */
--		brcmf_pcie_buscore_write32(ctx, CORE_CC_REG(SI_ENUM_BASE,
--							    watchdog), 4);
--		msleep(100);
--	}
--
--	return err;
-+	return brcmf_pcie_get_resource(ctx);
- }
- 
- 
-@@ -1824,6 +1811,7 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- 		brcmf_pcie_intr_disable(devinfo);
- 
- 	brcmf_detach(&pdev->dev);
-+	brcmf_pcie_reset_device(devinfo);
- 
- 	kfree(bus->bus_priv.pcie);
- 	kfree(bus->msgbuf->flowrings);
diff --git a/package/kernel/mac80211/patches/388-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch b/package/kernel/mac80211/patches/388-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch
deleted file mode 100644
index 756fbb2..0000000
--- a/package/kernel/mac80211/patches/388-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:35 +0200
-Subject: [PATCH] brcmfmac: use debugfs_create_devm_seqfile() helper
- function
-
-Some time ago the function debugfs_create_devm_seqfile() was
-introduced in debugfs. The caller simply needs to provide a
-device pointer and read function. The function brcmf_debugfs_add_entry()
-is now simply a wrapper only doing the work for CONFIG_BRCMDBG.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -64,44 +64,12 @@ struct dentry *brcmf_debugfs_get_devdir(
- 	return drvr->dbgfs_dir;
- }
- 
--struct brcmf_debugfs_entry {
--	int (*read)(struct seq_file *seq, void *data);
--	struct brcmf_pub *drvr;
--};
--
--static int brcmf_debugfs_entry_open(struct inode *inode, struct file *f)
--{
--	struct brcmf_debugfs_entry *entry = inode->i_private;
--
--	return single_open(f, entry->read, entry->drvr->bus_if->dev);
--}
--
--static const struct file_operations brcmf_debugfs_def_ops = {
--	.owner = THIS_MODULE,
--	.open = brcmf_debugfs_entry_open,
--	.release = single_release,
--	.read = seq_read,
--	.llseek = seq_lseek
--};
--
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- 			    int (*read_fn)(struct seq_file *seq, void *data))
- {
--	struct dentry *dentry =  drvr->dbgfs_dir;
--	struct brcmf_debugfs_entry *entry;
--
--	if (IS_ERR_OR_NULL(dentry))
--		return -ENOENT;
--
--	entry = devm_kzalloc(drvr->bus_if->dev, sizeof(*entry), GFP_KERNEL);
--	if (!entry)
--		return -ENOMEM;
--
--	entry->read = read_fn;
--	entry->drvr = drvr;
--
--	dentry = debugfs_create_file(fn, S_IRUGO, dentry, entry,
--				     &brcmf_debugfs_def_ops);
-+	struct dentry *e;
- 
--	return PTR_ERR_OR_ZERO(dentry);
-+	e = debugfs_create_devm_seqfile(drvr->bus_if->dev, fn,
-+					drvr->dbgfs_dir, read_fn);
-+	return PTR_ERR_OR_ZERO(e);
- }
diff --git a/package/kernel/mac80211/patches/389-0001-brcmfmac-Check-if-firmware-supports-p2p.patch b/package/kernel/mac80211/patches/389-0001-brcmfmac-Check-if-firmware-supports-p2p.patch
deleted file mode 100644
index ff24a4a..0000000
--- a/package/kernel/mac80211/patches/389-0001-brcmfmac-Check-if-firmware-supports-p2p.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:17 +0200
-Subject: [PATCH] brcmfmac: Check if firmware supports p2p
-
-Add a feature flag to reflect the firmware's p2p capability.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -129,6 +129,7 @@ void brcmf_feat_attach(struct brcmf_pub
- 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- 	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
- 		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
- 
- 	/* set chip related quirks */
- 	switch (drvr->bus_if->chip) {
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -23,12 +23,14 @@
-  * MCHAN: multi-channel for concurrent P2P.
-  * PNO: preferred network offload.
-  * WOWL: Wake-On-WLAN.
-+ * P2P: peer-to-peer
-  */
- #define BRCMF_FEAT_LIST \
- 	BRCMF_FEAT_DEF(MBSS) \
- 	BRCMF_FEAT_DEF(MCHAN) \
- 	BRCMF_FEAT_DEF(PNO) \
--	BRCMF_FEAT_DEF(WOWL)
-+	BRCMF_FEAT_DEF(WOWL) \
-+	BRCMF_FEAT_DEF(P2P)
- /*
-  * Quirks:
-  *
diff --git a/package/kernel/mac80211/patches/389-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch b/package/kernel/mac80211/patches/389-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch
deleted file mode 100644
index 3876ba0..0000000
--- a/package/kernel/mac80211/patches/389-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:18 +0200
-Subject: [PATCH] brcmfmac: Build wiphy mode and interface combinations
- dynamically
-
-Switch from using semi hard coded interface combinations. This makes
-it easier to announce what the firmware actually supports. This fixes
-the case where brcmfmac announces p2p but the firmware doesn't
-support it.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -52,8 +52,6 @@
- #define BRCMF_PNO_SCAN_COMPLETE		1
- #define BRCMF_PNO_SCAN_INCOMPLETE	0
- 
--#define BRCMF_IFACE_MAX_CNT		3
--
- #define WPA_OUI				"\x00\x50\xF2"	/* WPA OUI */
- #define WPA_OUI_TYPE			1
- #define RSN_OUI				"\x00\x0F\xAC"	/* RSN OUI */
-@@ -5639,53 +5637,6 @@ static int brcmf_setup_wiphybands(struct
- 	return 0;
- }
- 
--static const struct ieee80211_iface_limit brcmf_iface_limits_mbss[] = {
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_STATION) |
--			 BIT(NL80211_IFTYPE_ADHOC)
--	},
--	{
--		.max = 4,
--		.types = BIT(NL80211_IFTYPE_AP)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--			 BIT(NL80211_IFTYPE_P2P_GO)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
--	}
--};
--
--static const struct ieee80211_iface_limit brcmf_iface_limits_sbss[] = {
--	{
--		.max = 2,
--		.types = BIT(NL80211_IFTYPE_STATION) |
--			 BIT(NL80211_IFTYPE_ADHOC) |
--			 BIT(NL80211_IFTYPE_AP)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--			 BIT(NL80211_IFTYPE_P2P_GO)
--	},
--	{
--		.max = 1,
--		.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
--	}
--};
--static struct ieee80211_iface_combination brcmf_iface_combos[] = {
--	{
--		 .max_interfaces = BRCMF_IFACE_MAX_CNT,
--		 .num_different_channels = 1,
--		 .n_limits = ARRAY_SIZE(brcmf_iface_limits_sbss),
--		 .limits = brcmf_iface_limits_sbss,
--	}
--};
--
- static const struct ieee80211_txrx_stypes
- brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
- 	[NL80211_IFTYPE_STATION] = {
-@@ -5715,6 +5666,67 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- 	}
- };
- 
-+static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
-+{
-+	struct ieee80211_iface_combination *combo = NULL;
-+	struct ieee80211_iface_limit *limits = NULL;
-+	int i = 0, max_iface_cnt;
-+
-+	combo = kzalloc(sizeof(*combo), GFP_KERNEL);
-+	if (!combo)
-+		goto err;
-+
-+	limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
-+	if (!limits)
-+		goto err;
-+
-+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-+				 BIT(NL80211_IFTYPE_ADHOC) |
-+				 BIT(NL80211_IFTYPE_AP);
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-+		combo->num_different_channels = 2;
-+	else
-+		combo->num_different_channels = 1;
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+		limits[i].max = 4;
-+		limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+		max_iface_cnt = 5;
-+	} else {
-+		limits[i].max = 2;
-+		limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
-+				    BIT(NL80211_IFTYPE_AP);
-+		max_iface_cnt = 2;
-+	}
-+
-+	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
-+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+					  BIT(NL80211_IFTYPE_P2P_GO) |
-+					  BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+				    BIT(NL80211_IFTYPE_P2P_GO);
-+		limits[i].max = 1;
-+		limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		max_iface_cnt += 2;
-+	}
-+	combo->max_interfaces = max_iface_cnt;
-+	combo->limits = limits;
-+	combo->n_limits = i;
-+
-+	wiphy->iface_combinations = combo;
-+	wiphy->n_iface_combinations = 1;
-+	return 0;
-+
-+err:
-+	kfree(limits);
-+	kfree(combo);
-+	return -ENOMEM;
-+}
-+
- static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
- {
- 	/* scheduled scan settings */
-@@ -5745,7 +5757,6 @@ static void brcmf_wiphy_wowl_params(stru
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct ieee80211_supported_band *band;
--	struct ieee80211_iface_combination ifc_combo;
- 	__le32 bandlist[3];
- 	u32 n_bands;
- 	int err, i;
-@@ -5753,24 +5764,11 @@ static int brcmf_setup_wiphy(struct wiph
- 	wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- 	wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- 	wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
--	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
--				 BIT(NL80211_IFTYPE_ADHOC) |
--				 BIT(NL80211_IFTYPE_AP) |
--				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
--				 BIT(NL80211_IFTYPE_P2P_GO) |
--				 BIT(NL80211_IFTYPE_P2P_DEVICE);
--	/* need VSDB firmware feature for concurrent channels */
--	ifc_combo = brcmf_iface_combos[0];
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
--		ifc_combo.num_different_channels = 2;
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
--		ifc_combo.n_limits = ARRAY_SIZE(brcmf_iface_limits_mbss),
--		ifc_combo.limits = brcmf_iface_limits_mbss;
--	}
--	wiphy->iface_combinations = kmemdup(&ifc_combo,
--					    sizeof(ifc_combo),
--					    GFP_KERNEL);
--	wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
-+
-+	err = brcmf_setup_ifmodes(wiphy, ifp);
-+	if (err)
-+		return err;
-+
- 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- 	wiphy->cipher_suites = __wl_cipher_suites;
- 	wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
-@@ -6035,6 +6033,8 @@ static void brcmf_free_wiphy(struct wiph
- 	if (!wiphy)
- 		return;
- 
-+	if (wiphy->iface_combinations)
-+		kfree(wiphy->iface_combinations->limits);
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/389-0003-brcmfmac-rework-.get_station-callback.patch b/package/kernel/mac80211/patches/389-0003-brcmfmac-rework-.get_station-callback.patch
deleted file mode 100644
index 7bd0686..0000000
--- a/package/kernel/mac80211/patches/389-0003-brcmfmac-rework-.get_station-callback.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:19 +0200
-Subject: [PATCH] brcmfmac: rework .get_station() callback
-
-The .get_station() cfg80211 callback is used in several scenarios. In
-managed mode it can obtain information about the access-point and its
-BSS parameters. In managed mode it can also obtain information about
-TDLS peers. In AP mode it can obtain information about connected
-clients.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2395,27 +2395,80 @@ brcmf_cfg80211_reconfigure_wep(struct br
- 		brcmf_err("set wsec error (%d)\n", err);
- }
- 
-+static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
-+{
-+	struct nl80211_sta_flag_update *sfu;
-+
-+	brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags);
-+	si->filled |= BIT(NL80211_STA_INFO_STA_FLAGS);
-+	sfu = &si->sta_flags;
-+	sfu->mask = BIT(NL80211_STA_FLAG_WME) |
-+		    BIT(NL80211_STA_FLAG_AUTHENTICATED) |
-+		    BIT(NL80211_STA_FLAG_ASSOCIATED) |
-+		    BIT(NL80211_STA_FLAG_AUTHORIZED);
-+	if (fw_sta_flags & BRCMF_STA_WME)
-+		sfu->set |= BIT(NL80211_STA_FLAG_WME);
-+	if (fw_sta_flags & BRCMF_STA_AUTHE)
-+		sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
-+	if (fw_sta_flags & BRCMF_STA_ASSOC)
-+		sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
-+	if (fw_sta_flags & BRCMF_STA_AUTHO)
-+		sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
-+}
-+
-+static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
-+{
-+	struct {
-+		__le32 len;
-+		struct brcmf_bss_info_le bss_le;
-+	} *buf;
-+	u16 capability;
-+	int err;
-+
-+	buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
-+	if (!buf)
-+		return;
-+
-+	buf->len = cpu_to_le32(WL_BSS_INFO_MAX);
-+	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
-+				     WL_BSS_INFO_MAX);
-+	if (err) {
-+		brcmf_err("Failed to get bss info (%d)\n", err);
-+		return;
-+	}
-+	si->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+	si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period);
-+	si->bss_param.dtim_period = buf->bss_le.dtim_period;
-+	capability = le16_to_cpu(buf->bss_le.capability);
-+	if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
-+	if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
-+	if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-+		si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
-+}
-+
- static s32
- brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
- 			   const u8 *mac, struct station_info *sinfo)
- {
- 	struct brcmf_if *ifp = netdev_priv(ndev);
--	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
--	struct brcmf_scb_val_le scb_val;
--	int rssi;
--	s32 rate;
- 	s32 err = 0;
--	u8 *bssid = profile->bssid;
- 	struct brcmf_sta_info_le sta_info_le;
--	u32 beacon_period;
--	u32 dtim_period;
-+	u32 sta_flags;
-+	u32 is_tdls_peer;
- 
- 	brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
- 	if (!check_vif_up(ifp->vif))
- 		return -EIO;
- 
--	if (brcmf_is_apmode(ifp->vif)) {
--		memcpy(&sta_info_le, mac, ETH_ALEN);
-+	memset(&sta_info_le, 0, sizeof(sta_info_le));
-+	memcpy(&sta_info_le, mac, ETH_ALEN);
-+	err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info",
-+				       &sta_info_le,
-+				       sizeof(sta_info_le));
-+	is_tdls_peer = !err;
-+	if (err) {
- 		err = brcmf_fil_iovar_data_get(ifp, "sta_info",
- 					       &sta_info_le,
- 					       sizeof(sta_info_le));
-@@ -2423,73 +2476,48 @@ brcmf_cfg80211_get_station(struct wiphy
- 			brcmf_err("GET STA INFO failed, %d\n", err);
- 			goto done;
- 		}
--		sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
--		sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
--		if (le32_to_cpu(sta_info_le.flags) & BRCMF_STA_ASSOC) {
--			sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
--			sinfo->connected_time = le32_to_cpu(sta_info_le.in);
--		}
--		brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n",
--			  sinfo->inactive_time, sinfo->connected_time);
--	} else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) {
--		if (memcmp(mac, bssid, ETH_ALEN)) {
--			brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n",
--				  mac, bssid);
--			err = -ENOENT;
--			goto done;
--		}
--		/* Report the current tx rate */
--		err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
--		if (err) {
--			brcmf_err("Could not get rate (%d)\n", err);
--			goto done;
--		} else {
-+	}
-+	brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver));
-+	sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
-+	sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
-+	sta_flags = le32_to_cpu(sta_info_le.flags);
-+	brcmf_convert_sta_flags(sta_flags, sinfo);
-+	sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	if (is_tdls_peer)
-+		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	else
-+		sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
-+	if (sta_flags & BRCMF_STA_ASSOC) {
-+		sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
-+		sinfo->connected_time = le32_to_cpu(sta_info_le.in);
-+		brcmf_fill_bss_param(ifp, sinfo);
-+	}
-+	if (sta_flags & BRCMF_STA_SCBSTATS) {
-+		sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED);
-+		sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures);
-+		sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS);
-+		sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts);
-+		sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts);
-+		sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS);
-+		sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts);
-+		sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
-+		if (sinfo->tx_packets) {
- 			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
--			sinfo->txrate.legacy = rate * 5;
--			brcmf_dbg(CONN, "Rate %d Mbps\n", rate / 2);
-+			sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate);
-+			sinfo->txrate.legacy /= 100;
- 		}
--
--		if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
--			     &ifp->vif->sme_state)) {
--			memset(&scb_val, 0, sizeof(scb_val));
--			err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
--						     &scb_val, sizeof(scb_val));
--			if (err) {
--				brcmf_err("Could not get rssi (%d)\n", err);
--				goto done;
--			} else {
--				rssi = le32_to_cpu(scb_val.val);
--				sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
--				sinfo->signal = rssi;
--				brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
--			}
--			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD,
--						    &beacon_period);
--			if (err) {
--				brcmf_err("Could not get beacon period (%d)\n",
--					  err);
--				goto done;
--			} else {
--				sinfo->bss_param.beacon_interval =
--					beacon_period;
--				brcmf_dbg(CONN, "Beacon peroid %d\n",
--					  beacon_period);
--			}
--			err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD,
--						    &dtim_period);
--			if (err) {
--				brcmf_err("Could not get DTIM period (%d)\n",
--					  err);
--				goto done;
--			} else {
--				sinfo->bss_param.dtim_period = dtim_period;
--				brcmf_dbg(CONN, "DTIM peroid %d\n",
--					  dtim_period);
--			}
--			sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+		if (sinfo->rx_packets) {
-+			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
-+			sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate);
-+			sinfo->rxrate.legacy /= 100;
-+		}
-+		if (le16_to_cpu(sta_info_le.ver) >= 4) {
-+			sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES);
-+			sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes);
-+			sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES);
-+			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
- 		}
--	} else
--		err = -EPERM;
-+	}
- done:
- 	brcmf_dbg(TRACE, "Exit\n");
- 	return err;
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -32,7 +32,11 @@
- #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
- #define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
- 
--#define BRCMF_STA_ASSOC			0x10		/* Associated */
-+#define BRCMF_STA_WME              0x00000002      /* WMM association */
-+#define BRCMF_STA_AUTHE            0x00000008      /* Authenticated */
-+#define BRCMF_STA_ASSOC            0x00000010      /* Associated */
-+#define BRCMF_STA_AUTHO            0x00000020      /* Authorized */
-+#define BRCMF_STA_SCBSTATS         0x00004000      /* Per STA debug stats */
- 
- /* size of brcmf_scan_params not including variable length array */
- #define BRCMF_SCAN_PARAMS_FIXED_SIZE	64
-@@ -113,6 +117,7 @@
- #define BRCMF_WOWL_MAXPATTERNSIZE	128
- 
- #define BRCMF_COUNTRY_BUF_SZ		4
-+#define BRCMF_ANT_MAX			4
- 
- /* join preference types for join_pref iovar */
- enum brcmf_join_pref_types {
-@@ -456,25 +461,61 @@ struct brcmf_channel_info_le {
- };
- 
- struct brcmf_sta_info_le {
--	__le16	ver;		/* version of this struct */
--	__le16	len;		/* length in bytes of this structure */
--	__le16	cap;		/* sta's advertised capabilities */
--	__le32	flags;		/* flags defined below */
--	__le32	idle;		/* time since data pkt rx'd from sta */
--	u8	ea[ETH_ALEN];		/* Station address */
--	__le32	count;			/* # rates in this set */
--	u8	rates[BRCMF_MAXRATES_IN_SET];	/* rates in 500kbps units */
-+	__le16 ver;		/* version of this struct */
-+	__le16 len;		/* length in bytes of this structure */
-+	__le16 cap;		/* sta's advertised capabilities */
-+	__le32 flags;		/* flags defined below */
-+	__le32 idle;		/* time since data pkt rx'd from sta */
-+	u8 ea[ETH_ALEN];		/* Station address */
-+	__le32 count;			/* # rates in this set */
-+	u8 rates[BRCMF_MAXRATES_IN_SET];	/* rates in 500kbps units */
- 						/* w/hi bit set if basic */
--	__le32	in;		/* seconds elapsed since associated */
--	__le32	listen_interval_inms; /* Min Listen interval in ms for STA */
--	__le32	tx_pkts;	/* # of packets transmitted */
--	__le32	tx_failures;	/* # of packets failed */
--	__le32	rx_ucast_pkts;	/* # of unicast packets received */
--	__le32	rx_mcast_pkts;	/* # of multicast packets received */
--	__le32	tx_rate;	/* Rate of last successful tx frame */
--	__le32	rx_rate;	/* Rate of last successful rx frame */
--	__le32	rx_decrypt_succeeds;	/* # of packet decrypted successfully */
--	__le32	rx_decrypt_failures;	/* # of packet decrypted failed */
-+	__le32 in;		/* seconds elapsed since associated */
-+	__le32 listen_interval_inms; /* Min Listen interval in ms for STA */
-+	__le32 tx_pkts;	/* # of packets transmitted */
-+	__le32 tx_failures;	/* # of packets failed */
-+	__le32 rx_ucast_pkts;	/* # of unicast packets received */
-+	__le32 rx_mcast_pkts;	/* # of multicast packets received */
-+	__le32 tx_rate;	/* Rate of last successful tx frame */
-+	__le32 rx_rate;	/* Rate of last successful rx frame */
-+	__le32 rx_decrypt_succeeds;	/* # of packet decrypted successfully */
-+	__le32 rx_decrypt_failures;	/* # of packet decrypted failed */
-+	__le32 tx_tot_pkts;    /* # of tx pkts (ucast + mcast) */
-+	__le32 rx_tot_pkts;    /* # of data packets recvd (uni + mcast) */
-+	__le32 tx_mcast_pkts;  /* # of mcast pkts txed */
-+	__le64 tx_tot_bytes;   /* data bytes txed (ucast + mcast) */
-+	__le64 rx_tot_bytes;   /* data bytes recvd (ucast + mcast) */
-+	__le64 tx_ucast_bytes; /* data bytes txed (ucast) */
-+	__le64 tx_mcast_bytes; /* # data bytes txed (mcast) */
-+	__le64 rx_ucast_bytes; /* data bytes recvd (ucast) */
-+	__le64 rx_mcast_bytes; /* data bytes recvd (mcast) */
-+	s8 rssi[BRCMF_ANT_MAX];   /* per antenna rssi */
-+	s8 nf[BRCMF_ANT_MAX];     /* per antenna noise floor */
-+	__le16 aid;                    /* association ID */
-+	__le16 ht_capabilities;        /* advertised ht caps */
-+	__le16 vht_flags;              /* converted vht flags */
-+	__le32 tx_pkts_retry_cnt;      /* # of frames where a retry was
-+					 * exhausted.
-+					 */
-+	__le32 tx_pkts_retry_exhausted; /* # of user frames where a retry
-+					 * was exhausted
-+					 */
-+	s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last
-+					    * received data frame.
-+					    */
-+	/* TX WLAN retry/failure statistics:
-+	 * Separated for host requested frames and locally generated frames.
-+	 * Include unicast frame only where the retries/failures can be counted.
-+	 */
-+	__le32 tx_pkts_total;          /* # user frames sent successfully */
-+	__le32 tx_pkts_retries;        /* # user frames retries */
-+	__le32 tx_pkts_fw_total;       /* # FW generated sent successfully */
-+	__le32 tx_pkts_fw_retries;     /* # retries for FW generated frames */
-+	__le32 tx_pkts_fw_retry_exhausted;     /* # FW generated where a retry
-+						* was exhausted
-+						*/
-+	__le32 rx_pkts_retried;        /* # rx with retry bit set */
-+	__le32 tx_rate_fallback;       /* lowest fallback TX rate */
- };
- 
- struct brcmf_chanspec_list {
diff --git a/package/kernel/mac80211/patches/389-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch b/package/kernel/mac80211/patches/389-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch
deleted file mode 100644
index 302bc3e..0000000
--- a/package/kernel/mac80211/patches/389-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:20 +0200
-Subject: [PATCH] brcmfmac: have sdio return -EIO when device communication
- is not possible
-
-The bus interface functions txctl and rxctl may be used while the device
-can not be accessed, eg. upon driver .remove() callback. This patch will
-immediately return -EIO when this is the case which speeds up the module
-unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -988,6 +988,7 @@ static void brcmf_sdiod_freezer_detach(s
- 
- static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
- {
-+	sdiodev->state = BRCMF_SDIOD_DOWN;
- 	if (sdiodev->bus) {
- 		brcmf_sdio_remove(sdiodev->bus);
- 		sdiodev->bus = NULL;
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2820,6 +2820,8 @@ static int brcmf_sdio_bus_txdata(struct
- 	struct brcmf_sdio *bus = sdiodev->bus;
- 
- 	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Add space for the header */
- 	skb_push(pkt, bus->tx_hdrlen);
-@@ -2948,6 +2950,8 @@ brcmf_sdio_bus_txctl(struct device *dev,
- 	int ret;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Send from dpc */
- 	bus->ctrl_frame_buf = msg;
-@@ -3238,6 +3242,8 @@ brcmf_sdio_bus_rxctl(struct device *dev,
- 	struct brcmf_sdio *bus = sdiodev->bus;
- 
- 	brcmf_dbg(TRACE, "Enter\n");
-+	if (sdiodev->state != BRCMF_SDIOD_DATA)
-+		return -EIO;
- 
- 	/* Wait until control frame is available */
- 	timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
diff --git a/package/kernel/mac80211/patches/389-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch b/package/kernel/mac80211/patches/389-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch
deleted file mode 100644
index 34af6d2..0000000
--- a/package/kernel/mac80211/patches/389-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 2 Jul 2015 13:35:05 +0200
-Subject: [PATCH] ath9k: make DMA stop related messages debug-only
-
-A long time ago, ath9k had issues during reset where the DMA engine
-would stay active and could potentially corrupt memory.
-To debug those issues, the driver would print warnings whenever they
-occur.
-
-Nowadays, these issues are gone and the primary cause of these messages
-is if the MAC is stuck during reset or busy processing a long
-transmission. This is fairly harmless, yet these messages continue to
-worry users.
-
-To reduce the number of bogus bug reports, turn these messages into
-debug messages and count their occurence in the "reset" debugfs file.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -765,6 +765,8 @@ static int read_file_reset(struct seq_fi
- 		[RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
- 		[RESET_TYPE_MCI] = "MCI Reset",
- 		[RESET_TYPE_CALIBRATION] = "Calibration error",
-+		[RESET_TX_DMA_ERROR] = "Tx DMA stop error",
-+		[RESET_RX_DMA_ERROR] = "Rx DMA stop error",
- 	};
- 	int i;
- 
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -50,6 +50,8 @@ enum ath_reset_type {
- 	RESET_TYPE_BEACON_STUCK,
- 	RESET_TYPE_MCI,
- 	RESET_TYPE_CALIBRATION,
-+	RESET_TX_DMA_ERROR,
-+	RESET_RX_DMA_ERROR,
- 	__RESET_TYPE_MAX
- };
- 
---- a/drivers/net/wireless/ath/ath9k/recv.c
-+++ b/drivers/net/wireless/ath/ath9k/recv.c
-@@ -496,10 +496,9 @@ bool ath_stoprecv(struct ath_softc *sc)
- 
- 	if (!(ah->ah_flags & AH_UNPLUGGED) &&
- 	    unlikely(!stopped)) {
--		ath_err(ath9k_hw_common(sc->sc_ah),
--			"Could not stop RX, we could be "
--			"confusing the DMA engine when we start RX up\n");
--		ATH_DBG_WARN_ON_ONCE(!stopped);
-+		ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-+			"Failed to stop Rx DMA\n");
-+		RESET_STAT_INC(sc, RESET_RX_DMA_ERROR);
- 	}
- 	return stopped && !reset;
- }
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1896,8 +1896,11 @@ bool ath_drain_all_txq(struct ath_softc
- 			npend |= BIT(i);
- 	}
- 
--	if (npend)
--		ath_err(common, "Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+	if (npend) {
-+		RESET_STAT_INC(sc, RESET_TX_DMA_ERROR);
-+		ath_dbg(common, RESET,
-+			"Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+	}
- 
- 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- 		if (!ATH_TXQ_SETUP(sc, i))
diff --git a/package/kernel/mac80211/patches/389-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch b/package/kernel/mac80211/patches/389-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch
deleted file mode 100644
index 06f2dce..0000000
--- a/package/kernel/mac80211/patches/389-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:21 +0200
-Subject: [PATCH] brcmfmac: free ifp for non-netdev interface in p2p module
-
-Making it more clear by freeing the ifp in same place where the
-vif object is freed.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -867,8 +867,6 @@ static void brcmf_del_if(struct brcmf_pu
- 		}
- 		/* unregister will take care of freeing it */
- 		unregister_netdev(ifp->ndev);
--	} else {
--		kfree(ifp);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2238,6 +2238,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+	kfree(vif->ifp);
- 	brcmf_free_vif(vif);
- }
- 
-@@ -2361,6 +2362,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
- 		break;
- 
- 	case NL80211_IFTYPE_P2P_DEVICE:
-+		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
-+		brcmf_p2p_deinit_discovery(p2p);
- 		brcmf_p2p_delete_p2pdev(p2p, vif);
- 		return 0;
- 	default:
diff --git a/package/kernel/mac80211/patches/389-0007-brcmfmac-move-p2p-attach-detach-functions.patch b/package/kernel/mac80211/patches/389-0007-brcmfmac-move-p2p-attach-detach-functions.patch
deleted file mode 100644
index 0a6e093..0000000
--- a/package/kernel/mac80211/patches/389-0007-brcmfmac-move-p2p-attach-detach-functions.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:22 +0200
-Subject: [PATCH] brcmfmac: move p2p attach/detach functions
-
-Moving two functions in p2p.c as is so next change will be
-easier to review.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -1908,105 +1908,6 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
- 
- 
- /**
-- * brcmf_p2p_attach() - attach for P2P.
-- *
-- * @cfg: driver private data for cfg80211 interface.
-- */
--s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
--{
--	struct brcmf_if *pri_ifp;
--	struct brcmf_if *p2p_ifp;
--	struct brcmf_cfg80211_vif *p2p_vif;
--	struct brcmf_p2p_info *p2p;
--	struct brcmf_pub *drvr;
--	s32 bssidx;
--	s32 err = 0;
--
--	p2p = &cfg->p2p;
--	p2p->cfg = cfg;
--
--	drvr = cfg->pub;
--
--	pri_ifp = drvr->iflist[0];
--	p2p_ifp = drvr->iflist[1];
--
--	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
--
--	if (p2p_ifp) {
--		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
--					  false);
--		if (IS_ERR(p2p_vif)) {
--			brcmf_err("could not create discovery vif\n");
--			err = -ENOMEM;
--			goto exit;
--		}
--
--		p2p_vif->ifp = p2p_ifp;
--		p2p_ifp->vif = p2p_vif;
--		p2p_vif->wdev.netdev = p2p_ifp->ndev;
--		p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev;
--		SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy));
--
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
--
--		brcmf_p2p_generate_bss_mac(p2p, NULL);
--		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
--		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
--
--		/* Initialize P2P Discovery in the firmware */
--		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
--		if (err < 0) {
--			brcmf_err("set p2p_disc error\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* obtain bsscfg index for P2P discovery */
--		err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
--		if (err < 0) {
--			brcmf_err("retrieving discover bsscfg index failed\n");
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--		/* Verify that firmware uses same bssidx as driver !! */
--		if (p2p_ifp->bssidx != bssidx) {
--			brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n",
--				  bssidx, p2p_ifp->bssidx);
--			brcmf_free_vif(p2p_vif);
--			goto exit;
--		}
--
--		init_completion(&p2p->send_af_done);
--		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
--		init_completion(&p2p->afx_hdl.act_frm_scan);
--		init_completion(&p2p->wait_next_af);
--	}
--exit:
--	return err;
--}
--
--
--/**
-- * brcmf_p2p_detach() - detach P2P.
-- *
-- * @p2p: P2P specific data.
-- */
--void brcmf_p2p_detach(struct brcmf_p2p_info *p2p)
--{
--	struct brcmf_cfg80211_vif *vif;
--
--	vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
--	if (vif != NULL) {
--		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
--		brcmf_p2p_deinit_discovery(p2p);
--		/* remove discovery interface */
--		brcmf_free_vif(vif);
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	}
--	/* just set it all to zero */
--	memset(p2p, 0, sizeof(*p2p));
--}
--
--/**
-  * brcmf_p2p_get_current_chanspec() - Get current operation channel.
-  *
-  * @p2p: P2P specific data.
-@@ -2425,3 +2326,102 @@ void brcmf_p2p_stop_device(struct wiphy
- 	clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
- 	mutex_unlock(&cfg->usr_sync);
- }
-+
-+/**
-+ * brcmf_p2p_attach() - attach for P2P.
-+ *
-+ * @cfg: driver private data for cfg80211 interface.
-+ */
-+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
-+{
-+	struct brcmf_if *pri_ifp;
-+	struct brcmf_if *p2p_ifp;
-+	struct brcmf_cfg80211_vif *p2p_vif;
-+	struct brcmf_p2p_info *p2p;
-+	struct brcmf_pub *drvr;
-+	s32 bssidx;
-+	s32 err = 0;
-+
-+	p2p = &cfg->p2p;
-+	p2p->cfg = cfg;
-+
-+	drvr = cfg->pub;
-+
-+	pri_ifp = drvr->iflist[0];
-+	p2p_ifp = drvr->iflist[1];
-+
-+	p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;
-+
-+	if (p2p_ifp) {
-+		p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE,
-+					  false);
-+		if (IS_ERR(p2p_vif)) {
-+			brcmf_err("could not create discovery vif\n");
-+			err = -ENOMEM;
-+			goto exit;
-+		}
-+
-+		p2p_vif->ifp = p2p_ifp;
-+		p2p_ifp->vif = p2p_vif;
-+		p2p_vif->wdev.netdev = p2p_ifp->ndev;
-+		p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev;
-+		SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy));
-+
-+		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
-+
-+		brcmf_p2p_generate_bss_mac(p2p, NULL);
-+		memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
-+		brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
-+
-+		/* Initialize P2P Discovery in the firmware */
-+		err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
-+		if (err < 0) {
-+			brcmf_err("set p2p_disc error\n");
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+		/* obtain bsscfg index for P2P discovery */
-+		err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
-+		if (err < 0) {
-+			brcmf_err("retrieving discover bsscfg index failed\n");
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+		/* Verify that firmware uses same bssidx as driver !! */
-+		if (p2p_ifp->bssidx != bssidx) {
-+			brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n",
-+				  bssidx, p2p_ifp->bssidx);
-+			brcmf_free_vif(p2p_vif);
-+			goto exit;
-+		}
-+
-+		init_completion(&p2p->send_af_done);
-+		INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
-+		init_completion(&p2p->afx_hdl.act_frm_scan);
-+		init_completion(&p2p->wait_next_af);
-+	}
-+exit:
-+	return err;
-+}
-+
-+/**
-+ * brcmf_p2p_detach() - detach P2P.
-+ *
-+ * @p2p: P2P specific data.
-+ */
-+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p)
-+{
-+	struct brcmf_cfg80211_vif *vif;
-+
-+	vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
-+	if (vif != NULL) {
-+		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
-+		brcmf_p2p_deinit_discovery(p2p);
-+		/* remove discovery interface */
-+		brcmf_free_vif(vif);
-+		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+	}
-+	/* just set it all to zero */
-+	memset(p2p, 0, sizeof(*p2p));
-+}
-+
diff --git a/package/kernel/mac80211/patches/389-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch b/package/kernel/mac80211/patches/389-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch
deleted file mode 100644
index 72e8eed..0000000
--- a/package/kernel/mac80211/patches/389-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:23 +0200
-Subject: [PATCH] brcmfmac: assure p2pdev is unregistered upon driver
- unload
-
-When unloading the driver with a p2pdev interface it resulted in
-a warning upon calling wiphy_unregister() and subsequently a crash
-in the driver. This patch assures the p2pdev is unregistered calling
-unregister_wdev() before doing the wiphy_unregister().
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6206,10 +6206,8 @@ void brcmf_cfg80211_detach(struct brcmf_
- 	if (!cfg)
- 		return;
- 
--	WARN_ON(!list_empty(&cfg->vif_list));
--	wiphy_unregister(cfg->wiphy);
- 	brcmf_btcoex_detach(cfg);
--	brcmf_p2p_detach(&cfg->p2p);
-+	wiphy_unregister(cfg->wiphy);
- 	wl_deinit_priv(cfg);
- 	brcmf_free_wiphy(cfg->wiphy);
- }
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1098,6 +1098,7 @@ void brcmf_detach(struct device *dev)
- 
- 	/* stop firmware event handling */
- 	brcmf_fweh_detach(drvr);
-+	brcmf_p2p_detach(&drvr->config->p2p);
- 
- 	brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -16,6 +16,7 @@
- #include <linux/slab.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
- #include <net/cfg80211.h>
- 
- #include <brcmu_wifi.h>
-@@ -2418,8 +2419,9 @@ void brcmf_p2p_detach(struct brcmf_p2p_i
- 		brcmf_p2p_cancel_remain_on_channel(vif->ifp);
- 		brcmf_p2p_deinit_discovery(p2p);
- 		/* remove discovery interface */
--		brcmf_free_vif(vif);
--		p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
-+		rtnl_lock();
-+		brcmf_p2p_delete_p2pdev(p2p, vif);
-+		rtnl_unlock();
- 	}
- 	/* just set it all to zero */
- 	memset(p2p, 0, sizeof(*p2p));
diff --git a/package/kernel/mac80211/patches/390-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch b/package/kernel/mac80211/patches/390-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch
deleted file mode 100644
index 179c77e..0000000
--- a/package/kernel/mac80211/patches/390-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 15 Jun 2015 22:48:38 +0200
-Subject: [PATCH] brcmfmac: fix double free of p2pdev interface
-
-When freeing the driver ifp pointer it should also be removed from
-the driver interface list, which is what brcmf_remove_interface()
-does. Otherwise, the ifp pointer will be freed twice triggering
-a kernel oops.
-
-Fixes: f37d69a4babc ("brcmfmac: free ifp for non-netdev interface in p2p module")
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	kfree(vif->ifp);
-+	brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx);
- 	brcmf_free_vif(vif);
- }
- 
diff --git a/package/kernel/mac80211/patches/390-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch b/package/kernel/mac80211/patches/390-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch
deleted file mode 100644
index e4f88b5..0000000
--- a/package/kernel/mac80211/patches/390-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 15 Jun 2015 22:48:39 +0200
-Subject: [PATCH] brcmfmac: make brcmf_p2p_detach() call conditional
-
-During verification of error handling in brcmf_cfg80211_attach() a
-null pointer dereference occurred upon calling brcmf_p2p_detach()
-from brcmf_detach(). This should only be called when the
-brcmf_cfg80211_attach() has succeeded.
-
-Fixes: f7a40873d2fa ("brcmfmac: assure p2pdev is unregistered upon driver unload")
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1098,7 +1098,8 @@ void brcmf_detach(struct device *dev)
- 
- 	/* stop firmware event handling */
- 	brcmf_fweh_detach(drvr);
--	brcmf_p2p_detach(&drvr->config->p2p);
-+	if (drvr->config)
-+		brcmf_p2p_detach(&drvr->config->p2p);
- 
- 	brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
- 
diff --git a/package/kernel/mac80211/patches/391-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch b/package/kernel/mac80211/patches/391-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch
deleted file mode 100644
index 0a81237..0000000
--- a/package/kernel/mac80211/patches/391-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Rafa? Mi?ecki <zajec5@gmail.com>
-Date: Thu, 9 Jul 2015 17:07:08 +0200
-Subject: [PATCH] brcmfmac: set wiphy's addresses to provide valid MACs
-
-Broadcom's firmware requires every BSS to use MAC address with unique
-last few bits. The amount of bits may depend on a particular firmware,
-it was verified to be 2 for BCM43602 one.
-If this condition won't be fulfilled firmware will reject such MAC:
-brcmfmac: _brcmf_set_mac_address: Setting cur_etheraddr failed, -52
-
-We don't want to simply set addr_mask as it would also disallow using
-locally administrated bit. Instead let's build a list of addresses
-manually enabling 0x2 bit for extra interfaces.
-
-Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5784,6 +5784,7 @@ static void brcmf_wiphy_wowl_params(stru
- 
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
-+	struct brcmf_pub *drvr = ifp->drvr;
- 	struct ieee80211_supported_band *band;
- 	__le32 bandlist[3];
- 	u32 n_bands;
-@@ -5797,6 +5798,19 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (err)
- 		return err;
- 
-+	for (i = 0; i < wiphy->iface_combinations->max_interfaces &&
-+	     i < ARRAY_SIZE(drvr->addresses); i++) {
-+		u8 *addr = drvr->addresses[i].addr;
-+
-+		memcpy(addr, drvr->mac, ETH_ALEN);
-+		if (i) {
-+			addr[0] |= BIT(1);
-+			addr[ETH_ALEN - 1] ^= i;
-+		}
-+	}
-+	wiphy->addresses = drvr->addresses;
-+	wiphy->n_addresses = i;
-+
- 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- 	wiphy->cipher_suites = __wl_cipher_suites;
- 	wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -21,6 +21,7 @@
- #ifndef BRCMFMAC_CORE_H
- #define BRCMFMAC_CORE_H
- 
-+#include <net/cfg80211.h>
- #include "fweh.h"
- 
- #define TOE_TX_CSUM_OL		0x00000001
-@@ -118,6 +119,8 @@ struct brcmf_pub {
- 	/* Multicast data packets sent to dongle */
- 	unsigned long tx_multicast;
- 
-+	struct mac_address addresses[BRCMF_MAX_IFS];
-+
- 	struct brcmf_if *iflist[BRCMF_MAX_IFS];
- 
- 	struct mutex proto_block;
diff --git a/package/kernel/mac80211/patches/392-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch b/package/kernel/mac80211/patches/392-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
deleted file mode 100644
index e44f121..0000000
--- a/package/kernel/mac80211/patches/392-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
-Date: Thu, 9 Jul 2015 13:43:18 +0530
-Subject: [PATCH] brcmfmac: dhd_sdio.c: use existing atomic_or primitive
-
-There's already a generic implementation so use that instead.
-
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2564,15 +2564,6 @@ static inline void brcmf_sdio_clrintr(st
- 	}
- }
- 
--static void atomic_orr(int val, atomic_t *v)
--{
--	int old_val;
--
--	old_val = atomic_read(v);
--	while (atomic_cmpxchg(v, old_val, val | old_val) != old_val)
--		old_val = atomic_read(v);
--}
--
- static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
- {
- 	struct brcmf_core *buscore;
-@@ -2595,7 +2586,7 @@ static int brcmf_sdio_intr_rstatus(struc
- 	if (val) {
- 		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
- 		bus->sdcnt.f1regdata++;
--		atomic_orr(val, &bus->intstatus);
-+		atomic_or(val, &bus->intstatus);
- 	}
- 
- 	return ret;
-@@ -2712,7 +2703,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- 
- 	/* Keep still-pending events for next scheduling */
- 	if (intstatus)
--		atomic_orr(intstatus, &bus->intstatus);
-+		atomic_or(intstatus, &bus->intstatus);
- 
- 	brcmf_sdio_clrintr(bus);
- 
diff --git a/package/kernel/mac80211/patches/393-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch b/package/kernel/mac80211/patches/393-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
deleted file mode 100644
index 76ca143..0000000
--- a/package/kernel/mac80211/patches/393-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Aug 2015 00:16:42 +0200
-Subject: [PATCH] brcmfmac: check all combinations when setting wiphy's
- addresses
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom is working on better reflection of interface combinations. With
-upcoming patches we may have 1st combination supporting less interfaces
-than others.
-To don't run out of addresses check all combinations to find the one
-with the greatest max_interfaces value.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5785,7 +5785,9 @@ static void brcmf_wiphy_wowl_params(stru
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct brcmf_pub *drvr = ifp->drvr;
-+	const struct ieee80211_iface_combination *combo;
- 	struct ieee80211_supported_band *band;
-+	u16 max_interfaces = 0;
- 	__le32 bandlist[3];
- 	u32 n_bands;
- 	int err, i;
-@@ -5798,8 +5800,13 @@ static int brcmf_setup_wiphy(struct wiph
- 	if (err)
- 		return err;
- 
--	for (i = 0; i < wiphy->iface_combinations->max_interfaces &&
--	     i < ARRAY_SIZE(drvr->addresses); i++) {
-+	for (i = 0, combo = wiphy->iface_combinations;
-+	     i < wiphy->n_iface_combinations; i++, combo++) {
-+		max_interfaces = max(max_interfaces, combo->max_interfaces);
-+	}
-+
-+	for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses);
-+	     i++) {
- 		u8 *addr = drvr->addresses[i].addr;
- 
- 		memcpy(addr, drvr->mac, ETH_ALEN);
diff --git a/package/kernel/mac80211/patches/393-0002-brcmfmac-correct-interface-combination-info.patch b/package/kernel/mac80211/patches/393-0002-brcmfmac-correct-interface-combination-info.patch
deleted file mode 100644
index c4a0720..0000000
--- a/package/kernel/mac80211/patches/393-0002-brcmfmac-correct-interface-combination-info.patch
+++ /dev/null
@@ -1,204 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:03 +0200
-Subject: [PATCH] brcmfmac: correct interface combination info
-
-The interface combination provided by brcmfmac did not truly reflect
-the combinations supported by driver and/or firmware.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5694,63 +5694,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- 	}
- };
- 
-+/**
-+ * brcmf_setup_ifmodes() - determine interface modes and combinations.
-+ *
-+ * @wiphy: wiphy object.
-+ * @ifp: interface object needed for feat module api.
-+ *
-+ * The interface modes and combinations are determined dynamically here
-+ * based on firmware functionality.
-+ *
-+ * no p2p and no mbss:
-+ *
-+ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
-+ *
-+ * no p2p and mbss:
-+ *
-+ *	#STA <= 1, #AP <= 1, channels = 1, 2 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ *
-+ * p2p, no mchan, and mbss:
-+ *
-+ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
-+ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ *
-+ * p2p, mchan, and mbss:
-+ *
-+ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
-+ *	#STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
-+ *	#AP <= 4, matching BI, channels = 1, 4 total
-+ */
- static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- 	struct ieee80211_iface_combination *combo = NULL;
--	struct ieee80211_iface_limit *limits = NULL;
--	int i = 0, max_iface_cnt;
-+	struct ieee80211_iface_limit *c0_limits = NULL;
-+	struct ieee80211_iface_limit *p2p_limits = NULL;
-+	struct ieee80211_iface_limit *mbss_limits = NULL;
-+	bool mbss, p2p;
-+	int i, c, n_combos;
- 
--	combo = kzalloc(sizeof(*combo), GFP_KERNEL);
-+	mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
-+	p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
-+
-+	n_combos = 1 + !!p2p + !!mbss;
-+	combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
- 	if (!combo)
- 		goto err;
- 
--	limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
--	if (!limits)
-+	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
-+	if (!c0_limits)
- 		goto err;
- 
-+	if (p2p) {
-+		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
-+		if (!p2p_limits)
-+			goto err;
-+	}
-+
-+	if (mbss) {
-+		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
-+		if (!mbss_limits)
-+			goto err;
-+	}
-+
- 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
- 				 BIT(NL80211_IFTYPE_ADHOC) |
- 				 BIT(NL80211_IFTYPE_AP);
- 
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
--		combo->num_different_channels = 2;
--	else
--		combo->num_different_channels = 1;
--
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_STATION);
--		limits[i].max = 4;
--		limits[i++].types = BIT(NL80211_IFTYPE_AP);
--		max_iface_cnt = 5;
--	} else {
--		limits[i].max = 2;
--		limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
--				    BIT(NL80211_IFTYPE_AP);
--		max_iface_cnt = 2;
--	}
--
--	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
-+	c = 0;
-+	i = 0;
-+	combo[c].num_different_channels = 1;
-+	c0_limits[i].max = 1;
-+	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+	if (p2p) {
-+		if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-+			combo[c].num_different_channels = 2;
- 		wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
- 					  BIT(NL80211_IFTYPE_P2P_GO) |
- 					  BIT(NL80211_IFTYPE_P2P_DEVICE);
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
--				    BIT(NL80211_IFTYPE_P2P_GO);
--		limits[i].max = 1;
--		limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
--		max_iface_cnt += 2;
--	}
--	combo->max_interfaces = max_iface_cnt;
--	combo->limits = limits;
--	combo->n_limits = i;
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+				       BIT(NL80211_IFTYPE_P2P_GO);
-+	} else {
-+		c0_limits[i].max = 1;
-+		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+	}
-+	combo[c].max_interfaces = i;
-+	combo[c].n_limits = i;
-+	combo[c].limits = c0_limits;
-+
-+	if (p2p) {
-+		c++;
-+		i = 0;
-+		combo[c].num_different_channels = 1;
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
-+		p2p_limits[i].max = 1;
-+		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+		combo[c].max_interfaces = i;
-+		combo[c].n_limits = i;
-+		combo[c].limits = p2p_limits;
-+	}
- 
-+	if (mbss) {
-+		c++;
-+		combo[c].beacon_int_infra_match = true;
-+		combo[c].num_different_channels = 1;
-+		mbss_limits[0].max = 4;
-+		mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
-+		combo[c].max_interfaces = 4;
-+		combo[c].n_limits = 1;
-+		combo[c].limits = mbss_limits;
-+	}
-+	wiphy->n_iface_combinations = n_combos;
- 	wiphy->iface_combinations = combo;
--	wiphy->n_iface_combinations = 1;
- 	return 0;
- 
- err:
--	kfree(limits);
-+	kfree(c0_limits);
-+	kfree(p2p_limits);
-+	kfree(mbss_limits);
- 	kfree(combo);
- 	return -ENOMEM;
- }
-@@ -6079,11 +6148,15 @@ static void brcmf_cfg80211_reg_notifier(
- 
- static void brcmf_free_wiphy(struct wiphy *wiphy)
- {
-+	int i;
-+
- 	if (!wiphy)
- 		return;
- 
--	if (wiphy->iface_combinations)
--		kfree(wiphy->iface_combinations->limits);
-+	if (wiphy->iface_combinations) {
-+		for (i = 0; i < wiphy->n_iface_combinations; i++)
-+			kfree(wiphy->iface_combinations[i].limits);
-+	}
- 	kfree(wiphy->iface_combinations);
- 	if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- 		kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
diff --git a/package/kernel/mac80211/patches/393-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch b/package/kernel/mac80211/patches/393-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
deleted file mode 100644
index 9768ef2..0000000
--- a/package/kernel/mac80211/patches/393-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:04 +0200
-Subject: [PATCH] brcmfmac: add debugfs entry for msgbuf statistics
-
-Expose ring buffer read/write pointers and other useful statistics
-through debugfs.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -1360,6 +1360,60 @@ void brcmf_msgbuf_delete_flowring(struct
- 	}
- }
- 
-+#ifdef DEBUG
-+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
-+{
-+	struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
-+	struct brcmf_pub *drvr = bus_if->drvr;
-+	struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
-+	struct brcmf_commonring *commonring;
-+	u16 i;
-+	struct brcmf_flowring_ring *ring;
-+	struct brcmf_flowring_hash *hash;
-+
-+	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
-+	seq_printf(seq, "h2d_ctl_submit: rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_RXPOST_SUBMIT];
-+	seq_printf(seq, "h2d_rx_submit:  rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_CONTROL_COMPLETE];
-+	seq_printf(seq, "d2h_ctl_cmplt:  rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_TX_COMPLETE];
-+	seq_printf(seq, "d2h_tx_cmplt:   rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+	commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE];
-+	seq_printf(seq, "d2h_rx_cmplt:   rp %4u, wp %4u, depth %4u\n",
-+		   commonring->r_ptr, commonring->w_ptr, commonring->depth);
-+
-+	seq_printf(seq, "\nh2d_flowrings: depth %u\n",
-+		   BRCMF_H2D_TXFLOWRING_MAX_ITEM);
-+	seq_puts(seq, "Active flowrings:\n");
-+	hash = msgbuf->flow->hash;
-+	for (i = 0; i < msgbuf->flow->nrofrings; i++) {
-+		if (!msgbuf->flow->rings[i])
-+			continue;
-+		ring = msgbuf->flow->rings[i];
-+		if (ring->status != RING_OPEN)
-+			continue;
-+		commonring = msgbuf->flowrings[i];
-+		hash = &msgbuf->flow->hash[ring->hash_id];
-+		seq_printf(seq, "id %3u: rp %4u, wp %4u, qlen %4u, blocked %u\n"
-+				"        ifidx %u, fifo %u, da %pM\n",
-+				i, commonring->r_ptr, commonring->w_ptr,
-+				skb_queue_len(&ring->skblist), ring->blocked,
-+				hash->ifidx, hash->fifo, hash->mac);
-+	}
-+
-+	return 0;
-+}
-+#else
-+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
-+{
-+	return 0;
-+}
-+#endif
- 
- int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
- {
-@@ -1460,6 +1514,8 @@ int brcmf_proto_msgbuf_attach(struct brc
- 	spin_lock_init(&msgbuf->flowring_work_lock);
- 	INIT_LIST_HEAD(&msgbuf->work_queue);
- 
-+	brcmf_debugfs_add_entry(drvr, "msgbuf_stats", brcmf_msgbuf_stats_read);
-+
- 	return 0;
- 
- fail:
diff --git a/package/kernel/mac80211/patches/393-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch b/package/kernel/mac80211/patches/393-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch
deleted file mode 100644
index 2b84cf9..0000000
--- a/package/kernel/mac80211/patches/393-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:05 +0200
-Subject: [PATCH] brcmfmac: make use of cfg80211_check_combinations()
-
-Use cfg80211_check_combinations() so we can bail out early when an
-interface add or change results in an invalid combination.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -469,6 +469,36 @@ brcmf_find_wpsie(const u8 *parse, u32 le
- 	return NULL;
- }
- 
-+static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg,
-+				     struct brcmf_cfg80211_vif *vif,
-+				     enum nl80211_iftype new_type)
-+{
-+	int iftype_num[NUM_NL80211_IFTYPES];
-+	struct brcmf_cfg80211_vif *pos;
-+
-+	memset(&iftype_num[0], 0, sizeof(iftype_num));
-+	list_for_each_entry(pos, &cfg->vif_list, list)
-+		if (pos == vif)
-+			iftype_num[new_type]++;
-+		else
-+			iftype_num[pos->wdev.iftype]++;
-+
-+	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
-+}
-+
-+static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg,
-+				  enum nl80211_iftype new_type)
-+{
-+	int iftype_num[NUM_NL80211_IFTYPES];
-+	struct brcmf_cfg80211_vif *pos;
-+
-+	memset(&iftype_num[0], 0, sizeof(iftype_num));
-+	list_for_each_entry(pos, &cfg->vif_list, list)
-+		iftype_num[pos->wdev.iftype]++;
-+
-+	iftype_num[new_type]++;
-+	return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num);
-+}
- 
- static void convert_key_from_CPU(struct brcmf_wsec_key *key,
- 				 struct brcmf_wsec_key_le *key_le)
-@@ -662,8 +692,14 @@ static struct wireless_dev *brcmf_cfg802
- 						     struct vif_params *params)
- {
- 	struct wireless_dev *wdev;
-+	int err;
- 
- 	brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
-+	err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
-+	if (err) {
-+		brcmf_err("iface validation failed: err=%d\n", err);
-+		return ERR_PTR(err);
-+	}
- 	switch (type) {
- 	case NL80211_IFTYPE_ADHOC:
- 	case NL80211_IFTYPE_STATION:
-@@ -822,8 +858,12 @@ brcmf_cfg80211_change_iface(struct wiphy
- 	s32 ap = 0;
- 	s32 err = 0;
- 
--	brcmf_dbg(TRACE, "Enter, ndev=%p, type=%d\n", ndev, type);
--
-+	brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
-+	err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
-+	if (err) {
-+		brcmf_err("iface validation failed: err=%d\n", err);
-+		return err;
-+	}
- 	switch (type) {
- 	case NL80211_IFTYPE_MONITOR:
- 	case NL80211_IFTYPE_WDS:
diff --git a/package/kernel/mac80211/patches/393-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch b/package/kernel/mac80211/patches/393-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
deleted file mode 100644
index 2d5f7b9..0000000
--- a/package/kernel/mac80211/patches/393-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Franky Lin <frankyl@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:06 +0200
-Subject: [PATCH] brcmfmac: block the correct flowring when backup queue
- overflow
-
-brcmf_flowring_block blocks the last active flowring under the same
-interface instead of the one provided by caller. This could lead to a
-dead lock of netif stop if there are more than one flowring under the
-interface and the traffic is high enough so brcmf_flowring_enqueue can
-not unblock the ring right away.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -194,11 +194,15 @@ static void brcmf_flowring_block(struct
- 	spin_lock_irqsave(&flow->block_lock, flags);
- 
- 	ring = flow->rings[flowid];
-+	if (ring->blocked == blocked) {
-+		spin_unlock_irqrestore(&flow->block_lock, flags);
-+		return;
-+	}
- 	ifidx = brcmf_flowring_ifidx_get(flow, flowid);
- 
- 	currently_blocked = false;
- 	for (i = 0; i < flow->nrofrings; i++) {
--		if (flow->rings[i]) {
-+		if ((flow->rings[i]) && (i != flowid)) {
- 			ring = flow->rings[i];
- 			if ((ring->status == RING_OPEN) &&
- 			    (brcmf_flowring_ifidx_get(flow, i) == ifidx)) {
-@@ -209,8 +213,8 @@ static void brcmf_flowring_block(struct
- 			}
- 		}
- 	}
--	ring->blocked = blocked;
--	if (currently_blocked == blocked) {
-+	flow->rings[flowid]->blocked = blocked;
-+	if (currently_blocked) {
- 		spin_unlock_irqrestore(&flow->block_lock, flags);
- 		return;
- 	}
diff --git a/package/kernel/mac80211/patches/393-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch b/package/kernel/mac80211/patches/393-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
deleted file mode 100644
index 7378401..0000000
--- a/package/kernel/mac80211/patches/393-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 20 Aug 2015 22:06:07 +0200
-Subject: [PATCH] brcmfmac: bump highest event number for 4339 firmware
-
-The event mask length is determined by the highest event number
-that is specified in the driver. When this length is shorter than
-firmware expects setting event mask will fail and device becomes
-pretty useless. This issue was reported with bcm4339 firmware that
-was recently released.
-
-Reported-by: Pontus Fuchs <pontusf@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
-@@ -85,7 +85,6 @@ struct brcmf_event;
- 	BRCMF_ENUM_DEF(IF, 54) \
- 	BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \
- 	BRCMF_ENUM_DEF(RSSI, 56) \
--	BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \
- 	BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME, 59) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME_COMPLETE, 60) \
-@@ -103,8 +102,7 @@ struct brcmf_event;
- 	BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \
- 	BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \
- 	BRCMF_ENUM_DEF(TDLS_PEER_EVENT, 92) \
--	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) \
--	BRCMF_ENUM_DEF(PSTA_PRIMARY_INTF_IND, 128)
-+	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127)
- 
- #define BRCMF_ENUM_DEF(id, val) \
- 	BRCMF_E_##id = (val),
-@@ -112,7 +110,11 @@ struct brcmf_event;
- /* firmware event codes sent by the dongle */
- enum brcmf_fweh_event_code {
- 	BRCMF_FWEH_EVENT_ENUM_DEFLIST
--	BRCMF_E_LAST
-+	/* this determines event mask length which must match
-+	 * minimum length check in device firmware so it is
-+	 * hard-coded here.
-+	 */
-+	BRCMF_E_LAST = 139
- };
- #undef BRCMF_ENUM_DEF
- 
diff --git a/package/kernel/mac80211/patches/394-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch b/package/kernel/mac80211/patches/394-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
deleted file mode 100644
index 97444b3..0000000
--- a/package/kernel/mac80211/patches/394-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:53 +0200
-Subject: [PATCH] brcmfmac: consolidate ifp lookup in driver core
-
-In rx path the firmware provide an interface index which is used to
-map to a struct brcmf_if instance. However, this involves some trick
-that is done in two places. This is changed by having driver core
-providing brcmf_get_ifp() function.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -276,6 +276,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 			 struct sk_buff *pktbuf)
- {
- 	struct brcmf_proto_bcdc_header *h;
-+	struct brcmf_if *ifp;
- 
- 	brcmf_dbg(BCDC, "Enter\n");
- 
-@@ -289,30 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	trace_brcmf_bcdchdr(pktbuf->data);
- 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
- 
--	*ifidx = BCDC_GET_IF_IDX(h);
--	if (*ifidx >= BRCMF_MAX_IFS) {
--		brcmf_err("rx data ifnum out of range (%d)\n", *ifidx);
-+	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
-+	if (IS_ERR_OR_NULL(ifp)) {
-+		brcmf_dbg(INFO, "no matching ifp found\n");
- 		return -EBADE;
- 	}
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (*ifidx)
--		(*ifidx)++;
--
- 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- 	    BCDC_PROTO_VER) {
- 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
--			  brcmf_ifname(drvr, *ifidx), h->flags);
-+			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
- 		return -EBADE;
- 	}
- 
- 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
- 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
--			  brcmf_ifname(drvr, *ifidx), h->flags);
-+			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
- 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
- 	}
- 
-@@ -320,12 +312,15 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf);
-+		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
-+				  pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
- 
- 	if (pktbuf->len == 0)
- 		return -ENODATA;
-+
-+	*ifidx = ifp->ifidx;
- 	return 0;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -83,6 +83,25 @@ char *brcmf_ifname(struct brcmf_pub *drv
- 	return "<if_none>";
- }
- 
-+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
-+{
-+	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
-+		brcmf_err("ifidx %d out of range\n", ifidx);
-+		return ERR_PTR(-ERANGE);
-+	}
-+
-+	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
-+	 * events this is easy because it contains the bssidx which maps
-+	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
-+	 * bssidx 1 is used for p2p0 and no data can be received or
-+	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
-+	 */
-+	if (ifidx)
-+		ifidx++;
-+
-+	return drvr->iflist[ifidx];
-+}
-+
- static void _brcmf_set_multicast_list(struct work_struct *work)
- {
- 	struct brcmf_if *ifp;
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -202,7 +202,7 @@ int brcmf_netdev_wait_pend8021x(struct b
- 
- /* Return pointer to interface name */
- char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
--
-+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
- 			      char *name, u8 *mac_addr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -1081,16 +1081,8 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
- {
- 	struct brcmf_if *ifp;
- 
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (ifidx)
--		(ifidx)++;
--	ifp = msgbuf->drvr->iflist[ifidx];
--	if (!ifp || !ifp->ndev) {
-+	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
-+	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
- 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
diff --git a/package/kernel/mac80211/patches/394-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch b/package/kernel/mac80211/patches/394-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
deleted file mode 100644
index 632714c..0000000
--- a/package/kernel/mac80211/patches/394-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch
+++ /dev/null
@@ -1,222 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:54 +0200
-Subject: [PATCH] brcmfmac: make brcmf_proto_hdrpull() return struct
- brcmf_if instance
-
-Avoid spreading the ifidx in the driver, but have it return the
-struct brcmf_if instance.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -272,11 +272,11 @@ brcmf_proto_bcdc_hdrpush(struct brcmf_pu
- }
- 
- static int
--brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
--			 struct sk_buff *pktbuf)
-+brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws,
-+			 struct sk_buff *pktbuf, struct brcmf_if **ifp)
- {
- 	struct brcmf_proto_bcdc_header *h;
--	struct brcmf_if *ifp;
-+	struct brcmf_if *tmp_if;
- 
- 	brcmf_dbg(BCDC, "Enter\n");
- 
-@@ -290,21 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	trace_brcmf_bcdchdr(pktbuf->data);
- 	h = (struct brcmf_proto_bcdc_header *)(pktbuf->data);
- 
--	ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
--	if (IS_ERR_OR_NULL(ifp)) {
-+	tmp_if = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h));
-+	if (!tmp_if) {
- 		brcmf_dbg(INFO, "no matching ifp found\n");
- 		return -EBADE;
- 	}
- 	if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- 	    BCDC_PROTO_VER) {
- 		brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
--			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
-+			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
- 		return -EBADE;
- 	}
- 
- 	if (h->flags & BCDC_FLAG_SUM_GOOD) {
- 		brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n",
--			  brcmf_ifname(drvr, ifp->ifidx), h->flags);
-+			  brcmf_ifname(drvr, tmp_if->ifidx), h->flags);
- 		pktbuf->ip_summed = CHECKSUM_UNNECESSARY;
- 	}
- 
-@@ -312,7 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2,
-+		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
- 				  pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
-@@ -320,7 +320,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 	if (pktbuf->len == 0)
- 		return -ENODATA;
- 
--	*ifidx = ifp->ifidx;
-+	*ifp = tmp_if;
- 	return 0;
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -87,7 +87,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
- {
- 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- 		brcmf_err("ifidx %d out of range\n", ifidx);
--		return ERR_PTR(-ERANGE);
-+		return NULL;
- 	}
- 
- 	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
-@@ -539,17 +539,15 @@ void brcmf_rx_frame(struct device *dev,
- 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- 	struct brcmf_pub *drvr = bus_if->drvr;
- 	struct brcmf_skb_reorder_data *rd;
--	u8 ifidx;
- 	int ret;
- 
- 	brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
- 
- 	/* process and remove protocol-specific header */
--	ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb);
--	ifp = drvr->iflist[ifidx];
-+	ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
- 
- 	if (ret || !ifp || !ifp->ndev) {
--		if ((ret != -ENODATA) && ifp)
-+		if (ret != -ENODATA && ifp)
- 			ifp->stats.rx_errors++;
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
-@@ -592,17 +590,17 @@ void brcmf_txcomplete(struct device *dev
- {
- 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- 	struct brcmf_pub *drvr = bus_if->drvr;
--	u8 ifidx;
-+	struct brcmf_if *ifp;
- 
- 	/* await txstatus signal for firmware if active */
- 	if (brcmf_fws_fc_active(drvr->fws)) {
- 		if (!success)
- 			brcmf_fws_bustxfail(drvr->fws, txp);
- 	} else {
--		if (brcmf_proto_hdrpull(drvr, false, &ifidx, txp))
-+		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
- 			brcmu_pkt_buf_free_skb(txp);
- 		else
--			brcmf_txfinalize(drvr, txp, ifidx, success);
-+			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1448,7 +1448,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 	struct sk_buff *skb;
- 	struct brcmf_skbuff_cb *skcb;
- 	struct brcmf_fws_mac_descriptor *entry = NULL;
--	u8 ifidx;
-+	struct brcmf_if *ifp;
- 
- 	brcmf_dbg(DATA, "flags %d\n", flags);
- 
-@@ -1497,15 +1497,16 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 	}
- 	brcmf_fws_macdesc_return_req_credit(skb);
- 
--	if (brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb)) {
-+	ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp);
-+	if (ret) {
- 		brcmu_pkt_buf_free_skb(skb);
- 		return -EINVAL;
- 	}
- 	if (!remove_from_hanger)
--		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifidx,
-+		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
--		brcmf_txfinalize(fws->drvr, skb, ifidx, true);
-+		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
- 
- 	return 0;
- }
-@@ -1848,7 +1849,7 @@ static int brcmf_fws_commit_skb(struct b
- 		entry->transit_count--;
- 		if (entry->suppressed)
- 			entry->suppr_transit_count--;
--		brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
-+		(void)brcmf_proto_hdrpull(fws->drvr, false, skb, NULL);
- 		goto rollback;
- 	}
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -522,7 +522,7 @@ static int brcmf_msgbuf_set_dcmd(struct
- 
- 
- static int brcmf_msgbuf_hdrpull(struct brcmf_pub *drvr, bool do_fws,
--				u8 *ifidx, struct sk_buff *skb)
-+				struct sk_buff *skb, struct brcmf_if **ifp)
- {
- 	return -ENODEV;
- }
-@@ -1082,7 +1082,7 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf
- 	struct brcmf_if *ifp;
- 
- 	ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
--	if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) {
-+	if (!ifp || !ifp->ndev) {
- 		brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
- 		brcmu_pkt_buf_free_skb(skb);
- 		return;
---- a/drivers/net/wireless/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h
-@@ -24,8 +24,8 @@ enum proto_addr_mode {
- 
- 
- struct brcmf_proto {
--	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
--		       struct sk_buff *skb);
-+	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws,
-+		       struct sk_buff *skb, struct brcmf_if **ifp);
- 	int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd,
- 			  void *buf, uint len);
- 	int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
-@@ -46,9 +46,19 @@ int brcmf_proto_attach(struct brcmf_pub
- void brcmf_proto_detach(struct brcmf_pub *drvr);
- 
- static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
--				      u8 *ifidx, struct sk_buff *skb)
-+				      struct sk_buff *skb,
-+				      struct brcmf_if **ifp)
- {
--	return drvr->proto->hdrpull(drvr, do_fws, ifidx, skb);
-+	struct brcmf_if *tmp = NULL;
-+
-+	/* assure protocol is always called with
-+	 * non-null initialized pointer.
-+	 */
-+	if (ifp)
-+		*ifp = NULL;
-+	else
-+		ifp = &tmp;
-+	return drvr->proto->hdrpull(drvr, do_fws, skb, ifp);
- }
- static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx,
- 					 uint cmd, void *buf, uint len)
diff --git a/package/kernel/mac80211/patches/394-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch b/package/kernel/mac80211/patches/394-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
deleted file mode 100644
index 2d15a77..0000000
--- a/package/kernel/mac80211/patches/394-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:55 +0200
-Subject: [PATCH] brcmfmac: change parameters for
- brcmf_remove_interface()
-
-Just pass the interface to be removed, ie. the struct brcmf_if instance.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4982,7 +4982,7 @@ brcmf_notify_connect_status_ap(struct br
- 		brcmf_dbg(CONN, "AP mode link down\n");
- 		complete(&cfg->vif_disabled);
- 		if (ifp->vif->mbss)
--			brcmf_remove_interface(ifp->drvr, ifp->bssidx);
-+			brcmf_remove_interface(ifp);
- 		return 0;
- 	}
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -887,12 +887,13 @@ static void brcmf_del_if(struct brcmf_pu
- 	}
- }
- 
--void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx)
-+void brcmf_remove_interface(struct brcmf_if *ifp)
- {
--	if (drvr->iflist[bssidx]) {
--		brcmf_fws_del_interface(drvr->iflist[bssidx]);
--		brcmf_del_if(drvr, bssidx);
--	}
-+	if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp))
-+		return;
-+
-+	brcmf_fws_del_interface(ifp);
-+	brcmf_del_if(ifp->drvr, ifp->bssidx);
- }
- 
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr)
-@@ -1122,7 +1123,7 @@ void brcmf_detach(struct device *dev)
- 
- 	/* make sure primary interface removed last */
- 	for (i = BRCMF_MAX_IFS-1; i > -1; i--)
--		brcmf_remove_interface(drvr, i);
-+		brcmf_remove_interface(drvr->iflist[i]);
- 
- 	brcmf_cfg80211_detach(drvr->config);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -206,7 +206,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
- 			      char *name, u8 *mac_addr);
--void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx);
-+void brcmf_remove_interface(struct brcmf_if *ifp);
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
- 			  enum brcmf_netif_stop_reason reason, bool state);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -222,7 +222,7 @@ static void brcmf_fweh_handle_if_event(s
- 	err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
- 
- 	if (ifp && ifevent->action == BRCMF_E_IF_DEL)
--		brcmf_remove_interface(drvr, ifevent->bssidx);
-+		brcmf_remove_interface(ifp);
- }
- 
- /**
---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
-@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru
- {
- 	cfg80211_unregister_wdev(&vif->wdev);
- 	p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
--	brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx);
-+	brcmf_remove_interface(vif->ifp);
- 	brcmf_free_vif(vif);
- }
- 
diff --git a/package/kernel/mac80211/patches/394-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch b/package/kernel/mac80211/patches/394-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
deleted file mode 100644
index 2b61f4e..0000000
--- a/package/kernel/mac80211/patches/394-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:56 +0200
-Subject: [PATCH] brcmfmac: only call brcmf_cfg80211_detach() when attach
- was successful
-
-In brcmf_bus_start() the function brcmf_cfg80211_attach() is called which
-may fail. If this happens we should not call brcmf_cfg80211_detach() in
-the failure path as it will result in NULL pointer dereference:
-
-  brcmf_fweh_activate_events: Set event_msgs error (-5)
-  brcmf_bus_start: failed: -5
-  brcmf_sdio_firmware_callback: dongle is not responding
-  BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
-  IP: [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-  PGD 0
-  Oops: 0000 [#1] SMP
-  Modules linked in: brcmfmac(O) brcmutil(O) cfg80211 auth_rpcgss
-  CPU: 1 PID: 45 Comm: kworker/1:1 Tainted: G           O
-  Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
-  Workqueue: events request_firmware_work_func
-  task: ffff880036c09ac0 ti: ffff880036dd4000 task.ti: ffff880036dd4000
-  RIP: 0010:[<ffffffff811e8f08>]  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-  RSP: 0018:ffff880036dd7a28  EFLAGS: 00010246
-  RAX: ffff880036c09ac0 RBX: 0000000000000000 RCX: 000000007fffffff
-  RDX: 0000000000000000 RSI: ffffffff816578b9 RDI: 0000000000000000
-  RBP: ffff880036dd7a48 R08: 0000000000000000 R09: ffff880036c0b340
-  R10: 00000000000002ec R11: ffff880036dd7b08 R12: ffffffff816578b9
-  R13: 0000000000000000 R14: ffffffff816578b9 R15: ffff8800c6c87000
-  FS:  0000000000000000(0000) GS:ffff88012bc40000(0000) knlGS:0000000000000000
-  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
-  CR2: 0000000000000068 CR3: 0000000001a0b000 CR4: 00000000000006e0
-  Stack:
-   0000000000000000 ffffffff816578b9 0000000000000000 ffff8800c0d003c8
-   ffff880036dd7a78 ffffffff811e8ff5 0000000ffffffff1 ffffffff81a9b060
-   ffff8800c789f880 ffff8800c0d00000 ffff880036dd7a98 ffffffff811ebe0d
-  Call Trace:
-   [<ffffffff811e8ff5>] kernfs_find_and_get_ns+0x35/0x60
-   [<ffffffff811ebe0d>] sysfs_unmerge_group+0x1d/0x60
-   [<ffffffff81404ef2>] dpm_sysfs_remove+0x22/0x60
-   [<ffffffff813f9db9>] device_del+0x49/0x240
-   [<ffffffff815da768>] rfkill_unregister+0x58/0xc0
-   [<ffffffffa06bd91b>] wiphy_unregister+0xab/0x2f0 [cfg80211]
-   [<ffffffffa0742fe3>] brcmf_cfg80211_detach+0x23/0x50 [brcmfmac]
-   [<ffffffffa074d986>] brcmf_detach+0x86/0xe0 [brcmfmac]
-   [<ffffffffa0757de8>] brcmf_sdio_remove+0x48/0x120 [brcmfmac]
-   [<ffffffffa0758ed9>] brcmf_sdiod_remove+0x29/0xd0 [brcmfmac]
-   [<ffffffffa0759031>] brcmf_ops_sdio_remove+0xb1/0x110 [brcmfmac]
-   [<ffffffffa001c267>] sdio_bus_remove+0x37/0x100 [mmc_core]
-   [<ffffffff813fe026>] __device_release_driver+0x96/0x130
-   [<ffffffff813fe0e3>] device_release_driver+0x23/0x30
-   [<ffffffffa0754bc8>] brcmf_sdio_firmware_callback+0x2a8/0x5d0 [brcmfmac]
-   [<ffffffffa074deaf>] brcmf_fw_request_nvram_done+0x15f/0x5e0 [brcmfmac]
-   [<ffffffff8140142f>] ? devres_add+0x3f/0x50
-   [<ffffffff810642b5>] ? usermodehelper_read_unlock+0x15/0x20
-   [<ffffffff81400000>] ? platform_match+0x70/0xa0
-   [<ffffffff8140f400>] request_firmware_work_func+0x30/0x60
-   [<ffffffff8106828c>] process_one_work+0x14c/0x3d0
-   [<ffffffff8106862a>] worker_thread+0x11a/0x450
-   [<ffffffff81068510>] ? process_one_work+0x3d0/0x3d0
-   [<ffffffff8106d692>] kthread+0xd2/0xf0
-   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
-   [<ffffffff815ed35f>] ret_from_fork+0x3f/0x70
-   [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180
-  Code: e9 40 fe ff ff 48 89 d8 eb 87 66 0f 1f 84 00 00 00 00 00 66 66 66 66
-	90 55 48 89 e5 41 56 49 89 f6 41 55 49 89 d5 31 d2 41 54 53 <0f> b7
-	47 68 48 8b 5f 48 66 c1 e8 05 83 e0 01 4d 85 ed 0f b6 c8
-  RIP  [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0
-   RSP <ffff880036dd7a28>
-  CR2: 0000000000000068
-  ---[ end trace 87d6ec0d3fe46740 ]---
-
-Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1049,7 +1049,10 @@ int brcmf_bus_start(struct device *dev)
- fail:
- 	if (ret < 0) {
- 		brcmf_err("failed: %d\n", ret);
--		brcmf_cfg80211_detach(drvr->config);
-+		if (drvr->config) {
-+			brcmf_cfg80211_detach(drvr->config);
-+			drvr->config = NULL;
-+		}
- 		if (drvr->fws) {
- 			brcmf_fws_del_interface(ifp);
- 			brcmf_fws_deinit(drvr);
diff --git a/package/kernel/mac80211/patches/394-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch b/package/kernel/mac80211/patches/394-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
deleted file mode 100644
index 868b0a8..0000000
--- a/package/kernel/mac80211/patches/394-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:57 +0200
-Subject: [PATCH] brcmfmac: correct detection of p2pdev interface event
-
-The p2pdev interface is setup in firmware resulting in a interface
-event. This event has role and no-if flag. When role is p2p client
-and no-if flag is set it indicates that this is the p2pdev interface.
-This info is used in handling the event and adding interface in the
-driver.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -795,7 +795,7 @@ fail:
- }
- 
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
--			      char *name, u8 *mac_addr)
-+			      bool is_p2pdev, char *name, u8 *mac_addr)
- {
- 	struct brcmf_if *ifp;
- 	struct net_device *ndev;
-@@ -821,7 +821,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		}
- 	}
- 
--	if (!brcmf_p2p_enable && bssidx == 1) {
-+	if (!brcmf_p2p_enable && is_p2pdev) {
- 		/* this is P2P_DEVICE interface */
- 		brcmf_dbg(INFO, "allocate non-netdev interface\n");
- 		ifp = kzalloc(sizeof(*ifp), GFP_KERNEL);
-@@ -999,12 +999,12 @@ int brcmf_bus_start(struct device *dev)
- 	brcmf_dbg(TRACE, "\n");
- 
- 	/* add primary networking interface */
--	ifp = brcmf_add_if(drvr, 0, 0, "wlan%d", NULL);
-+	ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL);
- 	if (IS_ERR(ifp))
- 		return PTR_ERR(ifp);
- 
- 	if (brcmf_p2p_enable)
--		p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL);
-+		p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL);
- 	else
- 		p2p_ifp = NULL;
- 	if (IS_ERR(p2p_ifp))
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -205,7 +205,7 @@ char *brcmf_ifname(struct brcmf_pub *drv
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
- int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
- struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
--			      char *name, u8 *mac_addr);
-+			      bool is_p2pdev, char *name, u8 *mac_addr);
- void brcmf_remove_interface(struct brcmf_if *ifp);
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -179,6 +179,7 @@ static void brcmf_fweh_handle_if_event(s
- {
- 	struct brcmf_if_event *ifevent = data;
- 	struct brcmf_if *ifp;
-+	bool is_p2pdev;
- 	int err = 0;
- 
- 	brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n",
-@@ -186,18 +187,16 @@ static void brcmf_fweh_handle_if_event(s
- 		  ifevent->flags, ifevent->role);
- 
- 	/* The P2P Device interface event must not be ignored
--	 * contrary to what firmware tells us. The only way to
--	 * distinguish the P2P Device is by looking at the ifidx
--	 * and bssidx received.
-+	 * contrary to what firmware tells us.
- 	 */
--	if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
--	    (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
-+	is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) &&
-+		    ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT;
-+	if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
- 		brcmf_dbg(EVENT, "event can be ignored\n");
- 		return;
- 	}
- 	if (ifevent->ifidx >= BRCMF_MAX_IFS) {
--		brcmf_err("invalid interface index: %u\n",
--			  ifevent->ifidx);
-+		brcmf_err("invalid interface index: %u\n", ifevent->ifidx);
- 		return;
- 	}
- 
-@@ -207,7 +206,7 @@ static void brcmf_fweh_handle_if_event(s
- 		brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname,
- 			  emsg->addr);
- 		ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx,
--				   emsg->ifname, emsg->addr);
-+				   is_p2pdev, emsg->ifname, emsg->addr);
- 		if (IS_ERR(ifp))
- 			return;
- 		brcmf_fws_add_interface(ifp);
diff --git a/package/kernel/mac80211/patches/394-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch b/package/kernel/mac80211/patches/394-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
deleted file mode 100644
index aebbfa6..0000000
--- a/package/kernel/mac80211/patches/394-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:58 +0200
-Subject: [PATCH] brcmfmac: use brcmf_get_ifp() to map ifidx to struct
- brcmf_if instance
-
-The knowledge on how to map the interface index to a struct brcmf_if
-instance is in brcmf_get_ifp() so use that function when only the
-interface index is known instead of accessing brcmf_pub::iflist
-directly.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c
-@@ -149,7 +149,7 @@ static s32 brcmf_btcoex_params_read(stru
- static void brcmf_btcoex_boost_wifi(struct brcmf_btcoex_info *btci,
- 				    bool trump_sco)
- {
--	struct brcmf_if *ifp = btci->cfg->pub->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(btci->cfg->pub, 0);
- 
- 	if (trump_sco && !btci->saved_regs_part2) {
- 		/* this should reduce eSCO agressive
-@@ -468,7 +468,7 @@ int brcmf_btcoex_set_mode(struct brcmf_c
- {
- 	struct brcmf_cfg80211_info *cfg = wiphy_priv(vif->wdev.wiphy);
- 	struct brcmf_btcoex_info *btci = cfg->btcoex;
--	struct brcmf_if *ifp = cfg->pub->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
- 
- 	switch (mode) {
- 	case BRCMF_BTCOEX_DISABLED:
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6212,7 +6212,7 @@ static void brcmf_free_wiphy(struct wiph
- struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
- 						  struct device *busdev)
- {
--	struct net_device *ndev = drvr->iflist[0]->ndev;
-+	struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
- 	struct brcmf_cfg80211_info *cfg;
- 	struct wiphy *wiphy;
- 	struct brcmf_cfg80211_vif *vif;
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -121,7 +121,7 @@ static void brcmf_feat_iovar_int_set(str
- 
- void brcmf_feat_attach(struct brcmf_pub *drvr)
- {
--	struct brcmf_if *ifp = drvr->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- 
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
- 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -221,7 +221,7 @@ static void brcmf_flowring_block(struct
- 
- 	bus_if = dev_get_drvdata(flow->dev);
- 	drvr = bus_if->drvr;
--	ifp = drvr->iflist[ifidx];
-+	ifp = brcmf_get_ifp(drvr, ifidx);
- 	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FLOW, blocked);
- 
- 	spin_unlock_irqrestore(&flow->block_lock, flags);
---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
-@@ -334,7 +334,7 @@ void brcmf_fweh_attach(struct brcmf_pub
- void brcmf_fweh_detach(struct brcmf_pub *drvr)
- {
- 	struct brcmf_fweh_info *fweh = &drvr->fweh;
--	struct brcmf_if *ifp = drvr->iflist[0];
-+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
- 
- 	if (ifp) {
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -972,7 +972,7 @@ static void
- brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
- 			     u8 if_id)
- {
--	struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1];
-+	struct brcmf_if *ifp = brcmf_get_ifp(fws->drvr, if_id);
- 
- 	if (WARN_ON(!ifp))
- 		return;
-@@ -2118,6 +2118,7 @@ static int brcmf_debugfs_fws_stats_read(
- int brcmf_fws_init(struct brcmf_pub *drvr)
- {
- 	struct brcmf_fws_info *fws;
-+	struct brcmf_if *ifp;
- 	u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS;
- 	int rc;
- 	u32 mode;
-@@ -2177,21 +2178,22 @@ int brcmf_fws_init(struct brcmf_pub *drv
- 	 * continue. Set mode back to none indicating not enabled.
- 	 */
- 	fws->fw_signals = true;
--	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) {
-+	ifp = brcmf_get_ifp(drvr, 0);
-+	if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) {
- 		brcmf_err("failed to set bdcv2 tlv signaling\n");
- 		fws->fcmode = BRCMF_FWS_FCMODE_NONE;
- 		fws->fw_signals = false;
- 	}
- 
--	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1))
-+	if (brcmf_fil_iovar_int_set(ifp, "ampdu_hostreorder", 1))
- 		brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n");
- 
- 	/* Enable seq number reuse, if supported */
--	if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) {
-+	if (brcmf_fil_iovar_int_get(ifp, "wlfc_mode", &mode) == 0) {
- 		if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) {
- 			mode = 0;
- 			BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1);
--			if (brcmf_fil_iovar_int_set(drvr->iflist[0],
-+			if (brcmf_fil_iovar_int_set(ifp,
- 						    "wlfc_mode", mode) == 0) {
- 				BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1);
- 			}
diff --git a/package/kernel/mac80211/patches/394-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch b/package/kernel/mac80211/patches/394-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
deleted file mode 100644
index 23a7b6f..0000000
--- a/package/kernel/mac80211/patches/394-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:14:59 +0200
-Subject: [PATCH] brcmfmac: pass struct brcmf_if instance in
- brcmf_txfinalize()
-
-Most call sites of brcmf_txfinalize already have struct brcmf_if
-instance so pass that to brcmf_txfinalize() as the function
-needs it anyway.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -560,17 +560,11 @@ void brcmf_rx_frame(struct device *dev,
- 		brcmf_netif_rx(ifp, skb);
- }
- 
--void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
--		      bool success)
-+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
- {
--	struct brcmf_if *ifp;
- 	struct ethhdr *eh;
- 	u16 type;
- 
--	ifp = drvr->iflist[ifidx];
--	if (!ifp)
--		goto done;
--
- 	eh = (struct ethhdr *)(txp->data);
- 	type = ntohs(eh->h_proto);
- 
-@@ -582,7 +576,7 @@ void brcmf_txfinalize(struct brcmf_pub *
- 
- 	if (!success)
- 		ifp->stats.tx_errors++;
--done:
-+
- 	brcmu_pkt_buf_free_skb(txp);
- }
- 
-@@ -600,7 +594,7 @@ void brcmf_txcomplete(struct device *dev
- 		if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
- 			brcmu_pkt_buf_free_skb(txp);
- 		else
--			brcmf_txfinalize(drvr, txp, ifp->ifidx, success);
-+			brcmf_txfinalize(ifp, txp, success);
- 	}
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -210,8 +210,7 @@ void brcmf_remove_interface(struct brcmf
- int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
- void brcmf_txflowblock_if(struct brcmf_if *ifp,
- 			  enum brcmf_netif_stop_reason reason, bool state);
--void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx,
--		      bool success);
-+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
- 
- /* Sets dongle media info (drv_version, mac address). */
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1506,7 +1506,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
--		brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true);
-+		brcmf_txfinalize(ifp, skb, true);
- 
- 	return 0;
- }
-@@ -1905,7 +1905,7 @@ int brcmf_fws_process_skb(struct brcmf_i
- 	if (fws->avoid_queueing) {
- 		rc = brcmf_proto_txdata(drvr, ifp->ifidx, 0, skb);
- 		if (rc < 0)
--			brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
-+			brcmf_txfinalize(ifp, skb, false);
- 		return rc;
- 	}
- 
-@@ -1929,7 +1929,7 @@ int brcmf_fws_process_skb(struct brcmf_i
- 		brcmf_fws_schedule_deq(fws);
- 	} else {
- 		brcmf_err("drop skb: no hanger slot\n");
--		brcmf_txfinalize(drvr, skb, ifp->ifidx, false);
-+		brcmf_txfinalize(ifp, skb, false);
- 		rc = -ENOMEM;
- 	}
- 	brcmf_fws_unlock(fws);
-@@ -2009,8 +2009,9 @@ static void brcmf_fws_dequeue_worker(str
- 				ret = brcmf_proto_txdata(drvr, ifidx, 0, skb);
- 				brcmf_fws_lock(fws);
- 				if (ret < 0)
--					brcmf_txfinalize(drvr, skb, ifidx,
--							 false);
-+					brcmf_txfinalize(brcmf_get_ifp(drvr,
-+								       ifidx),
-+							 skb, false);
- 				if (fws->bus_flow_blocked)
- 					break;
- 			}
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -873,7 +873,11 @@ brcmf_msgbuf_process_txstatus(struct brc
- 	commonring = msgbuf->flowrings[flowid];
- 	atomic_dec(&commonring->outstanding_tx);
- 
--	brcmf_txfinalize(msgbuf->drvr, skb, tx_status->msg.ifidx, true);
-+	/* Hante: i believe this was a bug as tx_status->msg.ifidx was used
-+	 * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny?
-+	 */
-+	brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx),
-+			 skb, true);
- }
- 
- 
diff --git a/package/kernel/mac80211/patches/394-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch b/package/kernel/mac80211/patches/394-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
deleted file mode 100644
index 8ddc0a6..0000000
--- a/package/kernel/mac80211/patches/394-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:00 +0200
-Subject: [PATCH] brcmfmac: add mapping for interface index to bsscfg
- index
-
-Because the P2P Device interface in firmware uses the same interface
-index as the primary interface we use the bsscfg index as index in the
-struct brcmf_pub::iflist. However, in the data path we get the interface
-index and not the bsscfg index. So we need a mapping of interface index
-to bsscfg index, which can be determined upon handle adding the interface.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -85,21 +85,20 @@ char *brcmf_ifname(struct brcmf_pub *drv
- 
- struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
- {
-+	struct brcmf_if *ifp;
-+	s32 bssidx;
-+
- 	if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
- 		brcmf_err("ifidx %d out of range\n", ifidx);
- 		return NULL;
- 	}
- 
--	/* The ifidx is the idx to map to matching netdev/ifp. When receiving
--	 * events this is easy because it contains the bssidx which maps
--	 * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd.
--	 * bssidx 1 is used for p2p0 and no data can be received or
--	 * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0
--	 */
--	if (ifidx)
--		ifidx++;
-+	ifp = NULL;
-+	bssidx = drvr->if2bss[ifidx];
-+	if (bssidx >= 0)
-+		ifp = drvr->iflist[bssidx];
- 
--	return drvr->iflist[ifidx];
-+	return ifp;
- }
- 
- static void _brcmf_set_multicast_list(struct work_struct *work)
-@@ -831,6 +830,8 @@ struct brcmf_if *brcmf_add_if(struct brc
- 
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
-+		/* store mapping ifidx to bssidx */
-+		drvr->if2bss[ifidx] = bssidx;
- 	}
- 
- 	ifp->drvr = drvr;
-@@ -855,6 +856,7 @@ static void brcmf_del_if(struct brcmf_pu
- 	struct brcmf_if *ifp;
- 
- 	ifp = drvr->iflist[bssidx];
-+	drvr->if2bss[ifp->ifidx] = -1;
- 	drvr->iflist[bssidx] = NULL;
- 	if (!ifp) {
- 		brcmf_err("Null interface, idx=%d\n", bssidx);
-@@ -862,6 +864,7 @@ static void brcmf_del_if(struct brcmf_pu
- 	}
- 	brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx);
- 	if (ifp->ndev) {
-+		drvr->if2bss[ifp->ifidx] = -1;
- 		if (bssidx == 0) {
- 			if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
- 				rtnl_lock();
-@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev)
- 	if (!drvr)
- 		return -ENOMEM;
- 
-+	memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss));
- 	mutex_init(&drvr->proto_block);
- 
- 	/* Link to bus module */
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
-@@ -122,6 +122,7 @@ struct brcmf_pub {
- 	struct mac_address addresses[BRCMF_MAX_IFS];
- 
- 	struct brcmf_if *iflist[BRCMF_MAX_IFS];
-+	s32 if2bss[BRCMF_MAX_IFS];
- 
- 	struct mutex proto_block;
- 	unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
diff --git a/package/kernel/mac80211/patches/394-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch b/package/kernel/mac80211/patches/394-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
deleted file mode 100644
index a0a798b..0000000
--- a/package/kernel/mac80211/patches/394-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:01 +0200
-Subject: [PATCH] brcmfmac: add dedicated debug level for firmware
- console logging
-
-Both PCIe and SDIO devices have the possibility to log the firmware
-console output in kernel log. For PCIe it is logged when PCIE debug
-level is enabled. For SDIO it is logged when user specifies a non-zero
-console interval through debugfs. This patch tries to make it a
-bit more consistent. The firmware console output is only logged when
-FWCON debug level is enabled.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h
-@@ -37,6 +37,7 @@
- #define BRCMF_SDIO_VAL		0x00020000
- #define BRCMF_MSGBUF_VAL	0x00040000
- #define BRCMF_PCIE_VAL		0x00080000
-+#define BRCMF_FWCON_VAL		0x00100000
- 
- /* set default print format */
- #undef pr_fmt
-@@ -78,6 +79,7 @@ do {								\
- #define BRCMF_GLOM_ON()		(brcmf_msg_level & BRCMF_GLOM_VAL)
- #define BRCMF_EVENT_ON()	(brcmf_msg_level & BRCMF_EVENT_VAL)
- #define BRCMF_FIL_ON()		(brcmf_msg_level & BRCMF_FIL_VAL)
-+#define BRCMF_FWCON_ON()	(brcmf_msg_level & BRCMF_FWCON_VAL)
- 
- #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
- 
-@@ -90,6 +92,7 @@ do {								\
- #define BRCMF_GLOM_ON()		0
- #define BRCMF_EVENT_ON()	0
- #define BRCMF_FIL_ON()		0
-+#define BRCMF_FWCON_ON()	0
- 
- #endif /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -644,7 +644,7 @@ static void brcmf_pcie_bus_console_init(
- 	addr = console->base_addr + BRCMF_CONSOLE_BUFSIZE_OFFSET;
- 	console->bufsize = brcmf_pcie_read_tcm32(devinfo, addr);
- 
--	brcmf_dbg(PCIE, "Console: base %x, buf %x, size %d\n",
-+	brcmf_dbg(FWCON, "Console: base %x, buf %x, size %d\n",
- 		  console->base_addr, console->buf_addr, console->bufsize);
- }
- 
-@@ -656,6 +656,9 @@ static void brcmf_pcie_bus_console_read(
- 	u8 ch;
- 	u32 newidx;
- 
-+	if (!BRCMF_FWCON_ON())
-+		return;
-+
- 	console = &devinfo->shared.console;
- 	addr = console->base_addr + BRCMF_CONSOLE_WRITEIDX_OFFSET;
- 	newidx = brcmf_pcie_read_tcm32(devinfo, addr);
-@@ -677,7 +680,7 @@ static void brcmf_pcie_bus_console_read(
- 		}
- 		if (ch == '\n') {
- 			console->log_str[console->log_idx] = 0;
--			brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
-+			pr_debug("CONSOLE: %s", console->log_str);
- 			console->log_idx = 0;
- 		}
- 	}
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -123,6 +123,7 @@ struct rte_console {
- 
- #define BRCMF_FIRSTREAD	(1 << 6)
- 
-+#define BRCMF_CONSOLE	10	/* watchdog interval to poll console */
- 
- /* SBSDIO_DEVICE_CTL */
- 
-@@ -3204,6 +3205,8 @@ static void brcmf_sdio_debugfs_create(st
- 	if (IS_ERR_OR_NULL(dentry))
- 		return;
- 
-+	bus->console_interval = BRCMF_CONSOLE;
-+
- 	brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
- 	brcmf_debugfs_add_entry(drvr, "counters",
- 				brcmf_debugfs_sdio_count_read);
-@@ -3613,7 +3616,7 @@ static void brcmf_sdio_bus_watchdog(stru
- 	}
- #ifdef DEBUG
- 	/* Poll for console output periodically */
--	if (bus->sdiodev->state == BRCMF_SDIOD_DATA &&
-+	if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
- 	    bus->console_interval != 0) {
- 		bus->console.count += BRCMF_WD_POLL_MS;
- 		if (bus->console.count >= bus->console_interval) {
diff --git a/package/kernel/mac80211/patches/394-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch b/package/kernel/mac80211/patches/394-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
deleted file mode 100644
index 53e7ede..0000000
--- a/package/kernel/mac80211/patches/394-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:02 +0200
-Subject: [PATCH] brcmfmac: remove ifidx parameter from
- brcmf_fws_txstatus_suppressed()
-
-The brcmf_fws_txstatus_suppressed() function prototype specifies an
-ifidx parameter which is not used within the function implementation.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1398,7 +1398,7 @@ done:
- }
- 
- static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
--					 struct sk_buff *skb, u8 ifidx,
-+					 struct sk_buff *skb,
- 					 u32 genbit, u16 seq)
- {
- 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
-@@ -1503,7 +1503,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- 		return -EINVAL;
- 	}
- 	if (!remove_from_hanger)
--		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx,
-+		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb,
- 						    genbit, seq);
- 	if (remove_from_hanger || ret)
- 		brcmf_txfinalize(ifp, skb, true);
diff --git a/package/kernel/mac80211/patches/394-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch b/package/kernel/mac80211/patches/394-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
deleted file mode 100644
index bb05235..0000000
--- a/package/kernel/mac80211/patches/394-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:03 +0200
-Subject: [PATCH] brcmfmac: change prototype for brcmf_fws_hdrpull()
-
-Instead of passing ifidx and drvr just pass struct brcmf_if pointer
-which holds both parameters.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
-@@ -312,8 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- 
- 	skb_pull(pktbuf, BCDC_HEADER_LEN);
- 	if (do_fws)
--		brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2,
--				  pktbuf);
-+		brcmf_fws_hdrpull(tmp_if, h->data_offset << 2, pktbuf);
- 	else
- 		skb_pull(pktbuf, h->data_offset << 2);
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -1616,11 +1616,10 @@ static int brcmf_fws_notify_bcmc_credit_
- 	return 0;
- }
- 
--int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
--		      struct sk_buff *skb)
-+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb)
- {
- 	struct brcmf_skb_reorder_data *rd;
--	struct brcmf_fws_info *fws = drvr->fws;
-+	struct brcmf_fws_info *fws = ifp->drvr->fws;
- 	u8 *signal_data;
- 	s16 data_len;
- 	u8 type;
-@@ -1630,20 +1629,20 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
- 	s32 err;
- 
- 	brcmf_dbg(HDRS, "enter: ifidx %d, skblen %u, sig %d\n",
--		  ifidx, skb->len, signal_len);
-+		  ifp->ifidx, skb->len, siglen);
- 
--	WARN_ON(signal_len > skb->len);
-+	WARN_ON(siglen > skb->len);
- 
--	if (!signal_len)
--		return 0;
-+	if (!siglen)
-+		return;
- 	/* if flow control disabled, skip to packet data and leave */
- 	if ((!fws) || (!fws->fw_signals)) {
--		skb_pull(skb, signal_len);
--		return 0;
-+		skb_pull(skb, siglen);
-+		return;
- 	}
- 
- 	fws->stats.header_pulls++;
--	data_len = signal_len;
-+	data_len = siglen;
- 	signal_data = skb->data;
- 
- 	status = BRCMF_FWS_RET_OK_NOSCHEDULE;
-@@ -1731,14 +1730,12 @@ int brcmf_fws_hdrpull(struct brcmf_pub *
- 	/* signalling processing result does
- 	 * not affect the actual ethernet packet.
- 	 */
--	skb_pull(skb, signal_len);
-+	skb_pull(skb, siglen);
- 
- 	/* this may be a signal-only packet
- 	 */
- 	if (skb->len == 0)
- 		fws->stats.header_only_pkt++;
--
--	return 0;
- }
- 
- static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
-@@ -21,8 +21,7 @@
- int brcmf_fws_init(struct brcmf_pub *drvr);
- void brcmf_fws_deinit(struct brcmf_pub *drvr);
- bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
--int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
--		      struct sk_buff *skb);
-+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb);
- int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb);
- 
- void brcmf_fws_reset_interface(struct brcmf_if *ifp);
diff --git a/package/kernel/mac80211/patches/394-0012-brcmfmac-introduce-brcmf_net_detach-function.patch b/package/kernel/mac80211/patches/394-0012-brcmfmac-introduce-brcmf_net_detach-function.patch
deleted file mode 100644
index ba92c67..0000000
--- a/package/kernel/mac80211/patches/394-0012-brcmfmac-introduce-brcmf_net_detach-function.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 26 Aug 2015 22:15:04 +0200
-Subject: [PATCH] brcmfmac: introduce brcmf_net_detach() function
-
-In case of error during brcmf_bus_start() the network interfaces were
-freed using free_netdev(). However, the interfaces may have additional
-memory allocated which is not freed. The netdev has destructor set to
-brcmf_cfg80211_free_netdev() which frees the additional memory if
-allocated and call free_netdev(). The brcmf_net_detach() either calls
-brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when
-struct net_device::reg_state indicates the netdev was registered.
-
-Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -4746,7 +4746,8 @@ void brcmf_cfg80211_free_netdev(struct n
- 	ifp = netdev_priv(ndev);
- 	vif = ifp->vif;
- 
--	brcmf_free_vif(vif);
-+	if (vif)
-+		brcmf_free_vif(vif);
- 	free_netdev(ndev);
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -718,8 +718,6 @@ int brcmf_net_attach(struct brcmf_if *if
- 	}
- 
- 	brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
--
--	ndev->destructor = brcmf_cfg80211_free_netdev;
- 	return 0;
- 
- fail:
-@@ -729,6 +727,14 @@ fail:
- 	return -EBADE;
- }
- 
-+static void brcmf_net_detach(struct net_device *ndev)
-+{
-+	if (ndev->reg_state == NETREG_REGISTERED)
-+		unregister_netdev(ndev);
-+	else
-+		brcmf_cfg80211_free_netdev(ndev);
-+}
-+
- static int brcmf_net_p2p_open(struct net_device *ndev)
- {
- 	brcmf_dbg(TRACE, "Enter\n");
-@@ -805,8 +811,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 			  ifp->ndev->name);
- 		if (ifidx) {
- 			netif_stop_queue(ifp->ndev);
--			unregister_netdev(ifp->ndev);
--			free_netdev(ifp->ndev);
-+			brcmf_net_detach(ifp->ndev);
- 			drvr->iflist[bssidx] = NULL;
- 		} else {
- 			brcmf_err("ignore IF event\n");
-@@ -828,6 +833,7 @@ struct brcmf_if *brcmf_add_if(struct brc
- 		if (!ndev)
- 			return ERR_PTR(-ENOMEM);
- 
-+		ndev->destructor = brcmf_cfg80211_free_netdev;
- 		ifp = netdev_priv(ndev);
- 		ifp->ndev = ndev;
- 		/* store mapping ifidx to bssidx */
-@@ -879,8 +885,7 @@ static void brcmf_del_if(struct brcmf_pu
- 			cancel_work_sync(&ifp->setmacaddr_work);
- 			cancel_work_sync(&ifp->multicast_work);
- 		}
--		/* unregister will take care of freeing it */
--		unregister_netdev(ifp->ndev);
-+		brcmf_net_detach(ifp->ndev);
- 	}
- }
- 
-@@ -1056,11 +1061,11 @@ fail:
- 			brcmf_fws_deinit(drvr);
- 		}
- 		if (drvr->iflist[0]) {
--			free_netdev(ifp->ndev);
-+			brcmf_net_detach(ifp->ndev);
- 			drvr->iflist[0] = NULL;
- 		}
- 		if (p2p_ifp) {
--			free_netdev(p2p_ifp->ndev);
-+			brcmf_net_detach(p2p_ifp->ndev);
- 			drvr->iflist[1] = NULL;
- 		}
- 		return ret;
diff --git a/package/kernel/mac80211/patches/395-brcmfmac-Reset-PCIE-devices-after-recognition.patch b/package/kernel/mac80211/patches/395-brcmfmac-Reset-PCIE-devices-after-recognition.patch
deleted file mode 100644
index 5a7e447..0000000
--- a/package/kernel/mac80211/patches/395-brcmfmac-Reset-PCIE-devices-after-recognition.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Thu, 27 Aug 2015 16:14:06 +0200
-Subject: [PATCH] brcmfmac: Reset PCIE devices after recognition.
-
-When PCIE type devices are being FW reloaded without being properly
-reset then the device ends up in a locked state, requiring the
-device to be completely powered down. This patch adds a reset
-through watchdog at the moment the device (cores) has been
-recognized. This will solve warm reboot issues.
-
-Cc: Rafal Milecki <zajec5@gmail.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -101,6 +101,9 @@
- /* ARM Cortex M3 core, ID 0x82a */
- #define BCM4329_CORE_ARM_BASE		0x18002000
- 
-+/* Max possibly supported memory size (limited by IO mapped memory) */
-+#define BRCMF_CHIP_MAX_MEMSIZE		(4 * 1024 * 1024)
-+
- #define CORE_SB(base, field) \
- 		(base + SBCONFIGOFF + offsetof(struct sbconfig, field))
- #define	SBCOREREV(sbidh) \
-@@ -687,6 +690,12 @@ static int brcmf_chip_get_raminfo(struct
- 		brcmf_err("RAM size is undetermined\n");
- 		return -ENOMEM;
- 	}
-+
-+	if (ci->pub.ramsize > BRCMF_CHIP_MAX_MEMSIZE) {
-+		brcmf_err("RAM size is incorrect\n");
-+		return -ENOMEM;
-+	}
-+
- 	return 0;
- }
- 
-@@ -899,6 +908,15 @@ static int brcmf_chip_recognition(struct
- 
- 	/* assure chip is passive for core access */
- 	brcmf_chip_set_passive(&ci->pub);
-+
-+	/* Call bus specific reset function now. Cores have been determined
-+	 * but further access may require a chip specific reset at this point.
-+	 */
-+	if (ci->ops->reset) {
-+		ci->ops->reset(ci->ctx, &ci->pub);
-+		brcmf_chip_set_passive(&ci->pub);
-+	}
-+
- 	return brcmf_chip_get_raminfo(ci);
- }
- 
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -73,6 +73,7 @@ struct brcmf_buscore_ops {
- 	u32 (*read32)(void *ctx, u32 addr);
- 	void (*write32)(void *ctx, u32 addr, u32 value);
- 	int (*prepare)(void *ctx);
-+	int (*reset)(void *ctx, struct brcmf_chip *chip);
- 	int (*setup)(void *ctx, struct brcmf_chip *chip);
- 	void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -74,6 +74,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_REG_INTMASK			0x94
- #define BRCMF_PCIE_REG_SBMBX			0x98
- 
-+#define BRCMF_PCIE_REG_LINK_STATUS_CTRL		0xBC
-+
- #define BRCMF_PCIE_PCIE2REG_INTMASK		0x24
- #define BRCMF_PCIE_PCIE2REG_MAILBOXINT		0x48
- #define BRCMF_PCIE_PCIE2REG_MAILBOXMASK		0x4C
-@@ -466,6 +468,7 @@ brcmf_pcie_select_core(struct brcmf_pcie
- 
- static void brcmf_pcie_reset_device(struct brcmf_pciedev_info *devinfo)
- {
-+	struct brcmf_core *core;
- 	u16 cfg_offset[] = { BRCMF_PCIE_CFGREG_STATUS_CMD,
- 			     BRCMF_PCIE_CFGREG_PM_CSR,
- 			     BRCMF_PCIE_CFGREG_MSI_CAP,
-@@ -484,32 +487,38 @@ static void brcmf_pcie_reset_device(stru
- 	if (!devinfo->ci)
- 		return;
- 
-+	/* Disable ASPM */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
--	lsc = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA);
-+	pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			      &lsc);
- 	val = lsc & (~BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, val);
-+	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			       val);
- 
-+	/* Watchdog reset */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_CHIPCOMMON);
- 	WRITECC32(devinfo, watchdog, 4);
- 	msleep(100);
- 
-+	/* Restore ASPM */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--			       BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL);
--	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, lsc);
-+	pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL,
-+			       lsc);
- 
--	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
--		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR,
--				       cfg_offset[i]);
--		val = brcmf_pcie_read_reg32(devinfo,
--					    BRCMF_PCIE_PCIE2REG_CONFIGDATA);
--		brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
--			  cfg_offset[i], val);
--		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA,
--				       val);
-+	core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
-+	if (core->rev <= 13) {
-+		for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) {
-+			brcmf_pcie_write_reg32(devinfo,
-+					       BRCMF_PCIE_PCIE2REG_CONFIGADDR,
-+					       cfg_offset[i]);
-+			val = brcmf_pcie_read_reg32(devinfo,
-+				BRCMF_PCIE_PCIE2REG_CONFIGDATA);
-+			brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n",
-+				  cfg_offset[i], val);
-+			brcmf_pcie_write_reg32(devinfo,
-+					       BRCMF_PCIE_PCIE2REG_CONFIGDATA,
-+					       val);
-+		}
- 	}
- }
- 
-@@ -519,8 +528,6 @@ static void brcmf_pcie_attach(struct brc
- 	u32 config;
- 
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
--	if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0)
--		brcmf_pcie_reset_device(devinfo);
- 	/* BAR1 window may not be sized properly */
- 	brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
- 	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, 0x4e0);
-@@ -1636,6 +1643,23 @@ static int brcmf_pcie_buscoreprep(void *
- }
- 
- 
-+static int brcmf_pcie_buscore_reset(void *ctx, struct brcmf_chip *chip)
-+{
-+	struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
-+	u32 val;
-+
-+	devinfo->ci = chip;
-+	brcmf_pcie_reset_device(devinfo);
-+
-+	val = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
-+	if (val != 0xffffffff)
-+		brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
-+				       val);
-+
-+	return 0;
-+}
-+
-+
- static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
- 					u32 rstvec)
- {
-@@ -1647,6 +1671,7 @@ static void brcmf_pcie_buscore_activate(
- 
- static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
- 	.prepare = brcmf_pcie_buscoreprep,
-+	.reset = brcmf_pcie_buscore_reset,
- 	.activate = brcmf_pcie_buscore_activate,
- 	.read32 = brcmf_pcie_buscore_read32,
- 	.write32 = brcmf_pcie_buscore_write32,
-@@ -1814,7 +1839,6 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- 		brcmf_pcie_intr_disable(devinfo);
- 
- 	brcmf_detach(&pdev->dev);
--	brcmf_pcie_reset_device(devinfo);
- 
- 	kfree(bus->bus_priv.pcie);
- 	kfree(bus->msgbuf->flowrings);
diff --git a/package/kernel/mac80211/patches/396-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch b/package/kernel/mac80211/patches/396-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
deleted file mode 100644
index f7b3e40..0000000
--- a/package/kernel/mac80211/patches/396-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 13 Sep 2015 22:26:10 +0200
-Subject: [PATCH] ath10k: fix DMA related firmware crashes on multiple devices
-
-Some platforms really don't like DMA bursts of 256 bytes, and this
-causes the firmware to crash when sending beacons.
-Also, changing this based on the firmware version does not seem to make
-much sense, so use 128 bytes for all versions.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -253,7 +253,7 @@ struct ath10k_pktlog_hdr {
- #define TARGET_10X_MAX_FRAG_ENTRIES		0
- 
- /* 10.2 parameters */
--#define TARGET_10_2_DMA_BURST_SIZE		1
-+#define TARGET_10_2_DMA_BURST_SIZE		0
- 
- /* Target specific defines for WMI-TLV firmware */
- #define TARGET_TLV_NUM_VDEVS			3
diff --git a/package/kernel/mac80211/patches/397-ath9k-declare-required-extra-tx-headroom.patch b/package/kernel/mac80211/patches/397-ath9k-declare-required-extra-tx-headroom.patch
deleted file mode 100644
index c420d20..0000000
--- a/package/kernel/mac80211/patches/397-ath9k-declare-required-extra-tx-headroom.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 24 Sep 2015 16:57:37 +0200
-Subject: [PATCH] ath9k: declare required extra tx headroom
-
-ath9k inserts padding between the 802.11 header and the data area (to
-align it). Since it didn't declare this extra required headroom, this
-led to some nasty issues like randomly dropped packets in some setups.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -867,6 +867,7 @@ static void ath9k_set_hw_capab(struct at
- 	hw->max_rate_tries = 10;
- 	hw->sta_data_size = sizeof(struct ath_node);
- 	hw->vif_data_size = sizeof(struct ath_vif);
-+	hw->extra_tx_headroom = 4;
- 
- 	hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
- 	hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
diff --git a/package/kernel/mac80211/patches/398-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch b/package/kernel/mac80211/patches/398-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
deleted file mode 100644
index 1478efa..0000000
--- a/package/kernel/mac80211/patches/398-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Mon, 5 Oct 2015 17:41:25 +0200
-Subject: [PATCH] mac80211: initialize tid field in struct ieee80211_txq
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -3323,9 +3323,11 @@ void ieee80211_init_tx_queue(struct ieee
- 	if (sta) {
- 		txqi->txq.sta = &sta->sta;
- 		sta->sta.txq[tid] = &txqi->txq;
-+		txqi->txq.tid = tid;
- 		txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
- 	} else {
- 		sdata->vif.txq = &txqi->txq;
-+		txqi->txq.tid = 0;
- 		txqi->txq.ac = IEEE80211_AC_BE;
- 	}
- }
diff --git a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
index 298f722..72e9a41 100644
--- a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
+++ b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch
@@ -14,7 +14,7 @@
  ccflags-y += -D__CHECK_ENDIAN__
 --- a/drivers/net/wireless/ath/ath.h
 +++ b/drivers/net/wireless/ath/ath.h
-@@ -316,13 +316,6 @@ void _ath_dbg(struct ath_common *common,
+@@ -318,13 +318,6 @@ void _ath_dbg(struct ath_common *common,
  #endif /* CPTCFG_ATH_DEBUG */
  
  /** Returns string describing opmode, or NULL if unknown mode. */
diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
index 2dac505..f918c18 100644
--- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch
+++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
@@ -59,7 +59,7 @@
  	---help---
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -89,6 +89,7 @@ RTL8187_LEDS=
+@@ -137,6 +137,7 @@ RTL8187_LEDS=
  ATH_COMMON=
  ATH_CARDS=
  ATH_DEBUG=
diff --git a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
index 1476953..8b52ac3 100644
--- a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
+++ b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
@@ -1,6 +1,6 @@
 --- a/net/wireless/reg.c
 +++ b/net/wireless/reg.c
-@@ -2368,6 +2368,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2390,6 +2390,8 @@ void regulatory_hint_country_ie(struct w
  	enum environment_cap env = ENVIRON_ANY;
  	struct regulatory_request *request = NULL, *lr;
  
@@ -9,7 +9,7 @@
  	/* IE len must be evenly divisible by 2 */
  	if (country_ie_len & 0x01)
  		return;
-@@ -2571,6 +2573,7 @@ static void restore_regulatory_settings(
+@@ -2596,6 +2598,7 @@ static void restore_regulatory_settings(
  
  void regulatory_hint_disconnect(void)
  {
diff --git a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
index 93760f9..1a62484 100644
--- a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
+++ b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -715,6 +715,7 @@ static const struct ieee80211_iface_limi
+@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi
  				 BIT(NL80211_IFTYPE_AP) },
  	{ .max = 1,	.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
  				 BIT(NL80211_IFTYPE_P2P_GO) },
diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
index aa521d2..42d43a4 100644
--- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
+++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
@@ -121,7 +121,7 @@ drivers/net/wireless/ath/ath5k/debug.c |   86 ++++++++++++++++++++++++++++++++
  	debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah,
 --- a/drivers/net/wireless/ath/ath5k/ath5k.h
 +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1371,6 +1371,7 @@ struct ath5k_hw {
+@@ -1370,6 +1370,7 @@ struct ath5k_hw {
  	u8			ah_coverage_class;
  	bool			ah_ack_bitrate_high;
  	u8			ah_bwmode;
diff --git a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
index 5892c3e..5a3e37c 100644
--- a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
+++ b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1024,23 +1024,23 @@ static int __init ath9k_init(void)
+@@ -1032,23 +1032,23 @@ static int __init ath9k_init(void)
  {
  	int error;
  
diff --git a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
index ed2cfee..d2a3b96 100644
--- a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
+++ b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -389,13 +389,8 @@ static void ath9k_hw_init_config(struct
+@@ -390,13 +390,8 @@ static void ath9k_hw_init_config(struct
  
  	ah->config.rx_intr_mitigation = true;
  
@@ -14,5 +14,5 @@
 +	ah->config.rimt_last = 250;
 +	ah->config.rimt_first = 500;
  
- 	/*
- 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ 		ah->config.pll_pwrsave = 7;
diff --git a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
index d4104f0..6766111 100644
--- a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
+++ b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -87,7 +87,7 @@ int ath_descdma_setup(struct ath_softc *
+@@ -88,7 +88,7 @@ int ath_descdma_setup(struct ath_softc *
  		(_l) &= ((_sz) - 1);		\
  	} while (0)
  
diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
index 40b5c81..c84d1bc 100644
--- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
+++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -647,6 +647,7 @@ int ath9k_hw_init(struct ath_hw *ah)
+@@ -651,6 +651,7 @@ int ath9k_hw_init(struct ath_hw *ah)
  
  	/* These are all the AR5008/AR9001/AR9002/AR9003 hardware family of chipsets */
  	switch (ah->hw_version.devid) {
diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
index 0c50a0b..99bf7e8 100644
--- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
@@ -18,7 +18,7 @@
  				const u8 *addr);
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -1171,6 +1171,7 @@ enum ieee80211_smps_mode {
+@@ -1252,6 +1252,7 @@ enum ieee80211_smps_mode {
   *
   * @power_level: requested transmit power (in dBm), backward compatibility
   *	value only that is set to the minimum of all interfaces
@@ -26,7 +26,7 @@
   *
   * @chandef: the channel definition to tune to
   * @radar_enabled: whether radar detection is enabled
-@@ -1192,6 +1193,7 @@ struct ieee80211_conf {
+@@ -1273,6 +1274,7 @@ struct ieee80211_conf {
  	u32 flags;
  	int power_level, dynamic_ps_timeout;
  	int max_sleep_period;
@@ -36,7 +36,7 @@
  	u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -1760,6 +1760,9 @@ enum nl80211_commands {
+@@ -1761,6 +1761,9 @@ enum nl80211_commands {
   * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
   *      is operating in an indoor environment.
   *
@@ -46,7 +46,7 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2129,6 +2132,8 @@ enum nl80211_attrs {
+@@ -2130,6 +2133,8 @@ enum nl80211_attrs {
  
  	NL80211_ATTR_REG_INDOOR,
  
@@ -57,7 +57,7 @@
  	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2208,6 +2208,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2233,6 +2233,19 @@ static int ieee80211_get_tx_power(struct
  	return 0;
  }
  
@@ -77,7 +77,7 @@
  static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
  				  const u8 *addr)
  {
-@@ -3771,6 +3784,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3845,6 +3858,7 @@ const struct cfg80211_ops mac80211_confi
  	.set_wiphy_params = ieee80211_set_wiphy_params,
  	.set_tx_power = ieee80211_set_tx_power,
  	.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
  	CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1333,6 +1333,7 @@ struct ieee80211_local {
+@@ -1318,6 +1318,7 @@ struct ieee80211_local {
  	int dynamic_ps_forced_timeout;
  
  	int user_power_level; /* in dBm, for all interfaces */
@@ -97,7 +97,7 @@
  
 --- a/net/mac80211/main.c
 +++ b/net/mac80211/main.c
-@@ -98,7 +98,7 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -95,7 +95,7 @@ static u32 ieee80211_hw_conf_chan(struct
  	struct ieee80211_sub_if_data *sdata;
  	struct cfg80211_chan_def chandef = {};
  	u32 changed = 0;
@@ -106,7 +106,7 @@
  	u32 offchannel_flag;
  
  	offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
-@@ -155,6 +155,12 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -152,6 +152,12 @@ static u32 ieee80211_hw_conf_chan(struct
  	}
  	rcu_read_unlock();
  
@@ -119,7 +119,7 @@
  	if (local->hw.conf.power_level != power) {
  		changed |= IEEE80211_CONF_CHANGE_POWER;
  		local->hw.conf.power_level = power;
-@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -581,6 +587,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
  					 IEEE80211_RADIOTAP_MCS_HAVE_BW;
  	local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
  					 IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
@@ -129,7 +129,7 @@
  	local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -400,6 +400,7 @@ static const struct nla_policy nl80211_p
+@@ -402,6 +402,7 @@ static const struct nla_policy nl80211_p
  	[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
  	[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
  	[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
@@ -137,7 +137,7 @@
  };
  
  /* policy for the key attributes */
-@@ -2206,6 +2207,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -2207,6 +2208,20 @@ static int nl80211_set_wiphy(struct sk_b
  		if (result)
  			return result;
  	}
diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
index 7512811..3cfffa0 100644
--- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -814,6 +814,9 @@ static inline int ath9k_dump_btcoex(stru
+@@ -806,6 +806,9 @@ static inline int ath9k_dump_btcoex(stru
  void ath_init_leds(struct ath_softc *sc);
  void ath_deinit_leds(struct ath_softc *sc);
  void ath_fill_led_pin(struct ath_softc *sc);
@@ -10,7 +10,7 @@
  #else
  static inline void ath_init_leds(struct ath_softc *sc)
  {
-@@ -953,6 +956,13 @@ void ath_ant_comb_scan(struct ath_softc
+@@ -945,6 +948,13 @@ void ath_ant_comb_scan(struct ath_softc
  
  #define ATH9K_NUM_CHANCTX  2 /* supports 2 operating channels */
  
@@ -24,7 +24,7 @@
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1004,9 +1014,8 @@ struct ath_softc {
+@@ -996,9 +1006,8 @@ struct ath_softc {
  	spinlock_t chan_lock;
  
  #ifdef CPTCFG_MAC80211_LEDS
@@ -165,7 +165,7 @@
  void ath_fill_led_pin(struct ath_softc *sc)
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -936,7 +936,7 @@ int ath9k_init_device(u16 devid, struct
+@@ -944,7 +944,7 @@ int ath9k_init_device(u16 devid, struct
  
  #ifdef CPTCFG_MAC80211_LEDS
  	/* must be initialized before ieee80211_register_hw */
diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
index 08c5a0f..2b2c763 100644
--- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
+++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
@@ -62,7 +62,7 @@
  	debugfs_create_devm_seqfile(sc->dev, "interrupt", sc->debug.debugfs_phy,
 --- a/drivers/net/wireless/ath/ath9k/hw.h
 +++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -513,6 +513,12 @@ enum {
+@@ -519,6 +519,12 @@ enum {
  	ATH9K_RESET_COLD,
  };
  
@@ -75,7 +75,7 @@
  struct ath9k_hw_version {
  	u32 magic;
  	u16 devid;
-@@ -794,6 +800,8 @@ struct ath_hw {
+@@ -804,6 +810,8 @@ struct ath_hw {
  	u32 rfkill_polarity;
  	u32 ah_flags;
  
@@ -84,7 +84,7 @@
  	bool reset_power_on;
  	bool htc_reset_init;
  
-@@ -1055,6 +1063,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1066,6 +1074,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
  bool ath9k_hw_check_alive(struct ath_hw *ah);
  
  bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
@@ -94,7 +94,7 @@
  struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1804,6 +1804,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1808,6 +1808,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
  }
  EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
  
@@ -115,7 +115,7 @@
  int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
  		   struct ath9k_hw_cal_data *caldata, bool fastcc)
  {
-@@ -2012,6 +2026,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2016,6 +2030,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ar9003_hw_disable_phy_restart(ah);
  
  	ath9k_hw_apply_gpio_override(ah);
diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
index 8c9b34c..fddaf56 100644
--- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
+++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.h
 +++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -710,6 +710,7 @@ struct ath_spec_scan {
+@@ -720,6 +720,7 @@ struct ath_spec_scan {
   * @config_pci_powersave:
   * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC
   *
@@ -8,7 +8,7 @@
   * @spectral_scan_config: set parameters for spectral scan and enable/disable it
   * @spectral_scan_trigger: trigger a spectral scan run
   * @spectral_scan_wait: wait for a spectral scan run to finish
-@@ -732,6 +733,7 @@ struct ath_hw_ops {
+@@ -742,6 +743,7 @@ struct ath_hw_ops {
  			struct ath_hw_antcomb_conf *antconf);
  	void (*antdiv_comb_conf_set)(struct ath_hw *ah,
  			struct ath_hw_antcomb_conf *antconf);
@@ -55,7 +55,7 @@
  	ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -703,7 +703,8 @@ static void ath9k_init_txpower_limits(st
+@@ -710,7 +710,8 @@ static void ath9k_init_txpower_limits(st
  	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
  		ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
  
@@ -65,7 +65,7 @@
  }
  
  static const struct ieee80211_iface_limit if_limits[] = {
-@@ -896,6 +897,18 @@ static void ath9k_set_hw_capab(struct at
+@@ -904,6 +905,18 @@ static void ath9k_set_hw_capab(struct at
  	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
  }
  
@@ -84,7 +84,7 @@
  int ath9k_init_device(u16 devid, struct ath_softc *sc,
  		    const struct ath_bus_ops *bus_ops)
  {
-@@ -941,6 +954,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -949,6 +962,8 @@ int ath9k_init_device(u16 devid, struct
  		ARRAY_SIZE(ath9k_tpt_blink));
  #endif
  
@@ -110,7 +110,7 @@
  static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -1316,9 +1316,30 @@ void ar5008_hw_init_rate_txpower(struct
+@@ -1327,9 +1327,30 @@ void ar5008_hw_init_rate_txpower(struct
  	}
  }
  
@@ -141,7 +141,7 @@
  	static const u32 ar5416_cca_regs[6] = {
  		AR_PHY_CCA,
  		AR_PHY_CH1_CCA,
-@@ -1333,6 +1354,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
+@@ -1344,6 +1365,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
  	if (ret)
  	    return ret;
  
diff --git a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
index 240b898..6ca642a 100644
--- a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
+++ b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -245,6 +245,19 @@ void ath9k_hw_get_channel_centers(struct
+@@ -246,6 +246,19 @@ void ath9k_hw_get_channel_centers(struct
  		centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
  }
  
@@ -20,7 +20,7 @@
  /******************/
  /* Chip Revisions */
  /******************/
-@@ -1382,6 +1395,9 @@ static bool ath9k_hw_set_reset(struct at
+@@ -1386,6 +1399,9 @@ static bool ath9k_hw_set_reset(struct at
  	if (AR_SREV_9100(ah))
  		udelay(50);
  
@@ -30,7 +30,7 @@
  	return true;
  }
  
-@@ -1481,6 +1497,9 @@ static bool ath9k_hw_chip_reset(struct a
+@@ -1485,6 +1501,9 @@ static bool ath9k_hw_chip_reset(struct a
  		ar9003_hw_internal_regulator_apply(ah);
  	ath9k_hw_init_pll(ah, chan);
  
@@ -40,7 +40,7 @@
  	return true;
  }
  
-@@ -1782,8 +1801,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1786,8 +1805,14 @@ static int ath9k_hw_do_fastcc(struct ath
  	if (AR_SREV_9271(ah))
  		ar9002_hw_load_ani_reg(ah, chan);
  
@@ -55,7 +55,7 @@
  	return -EINVAL;
  }
  
-@@ -2037,6 +2062,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2041,6 +2066,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ath9k_hw_set_radar_params(ah);
  	}
  
diff --git a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
index 9610372..bc0aca6 100644
--- a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
+++ b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -945,55 +945,6 @@ static bool ar5008_hw_ani_control_new(st
+@@ -956,55 +956,6 @@ static bool ar5008_hw_ani_control_new(st
  		 * on == 0 means more noise imm
  		 */
  		u32 on = param ? 1 : 0;
diff --git a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
index c0dc4fe..15863a6 100644
--- a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
+++ b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
@@ -20,32 +20,14 @@ Changes since v1: ---
  drivers/net/wireless/rt2x00/rt2800lib.h |   11 +++++++++++
  2 files changed, 11 insertions(+), 13 deletions(-)
 
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
-@@ -2960,17 +2960,4 @@ enum rt2800_eeprom_word {
-  */
- #define BCN_TBTT_OFFSET 64
- 
--/*
-- * RT2800 driver data structure
-- */
--struct rt2800_drv_data {
--	u8 calibration_bw20;
--	u8 calibration_bw40;
--	u8 bbp25;
--	u8 bbp26;
--	u8 txmixer_gain_24g;
--	u8 txmixer_gain_5g;
--	unsigned int tbtt_tick;
--};
--
- #endif /* RT2800_H */
 --- a/drivers/net/wireless/rt2x00/rt2800lib.h
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,17 @@
+@@ -20,6 +20,20 @@
  #ifndef RT2800LIB_H
  #define RT2800LIB_H
  
++#include "rt2800.h"
++
 +/* RT2800 driver data structure */
 +struct rt2800_drv_data {
 +	u8 calibration_bw20;
@@ -55,8 +37,30 @@ Changes since v1: ---
 +	u8 txmixer_gain_24g;
 +	u8 txmixer_gain_5g;
 +	unsigned int tbtt_tick;
++	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
 +};
 +
  struct rt2800_ops {
  	void (*register_read)(struct rt2x00_dev *rt2x00dev,
  			      const unsigned int offset, u32 *value);
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -2969,18 +2969,4 @@ enum rt2800_eeprom_word {
+ #define WCID_END	222
+ #define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
+ 
+-/*
+- * RT2800 driver data structure
+- */
+-struct rt2800_drv_data {
+-	u8 calibration_bw20;
+-	u8 calibration_bw40;
+-	u8 bbp25;
+-	u8 bbp26;
+-	u8 txmixer_gain_24g;
+-	u8 txmixer_gain_5g;
+-	unsigned int tbtt_tick;
+-	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+-};
+-
+ #endif /* RT2800_H */
diff --git a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
index 6bad6ac..9165eec 100644
--- a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
+++ b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch
@@ -24,7 +24,7 @@ Changes since v1:
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7747,6 +7747,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7721,6 +7721,7 @@ static int rt2800_probe_rt(struct rt2x00
  
  int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@ Changes since v1:
  	int retval;
  	u32 reg;
  
-@@ -7754,6 +7755,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7728,6 +7729,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (retval)
  		return retval;
  
@@ -44,9 +44,9 @@ Changes since v1:
  	 */
 --- a/drivers/net/wireless/rt2x00/rt2800lib.h
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,10 @@
- #ifndef RT2800LIB_H
- #define RT2800LIB_H
+@@ -22,6 +22,10 @@
+ 
+ #include "rt2800.h"
  
 +enum rt2800_flag {
 +	RT2800_HAS_HIGH_SHARED_MEM,
@@ -55,16 +55,16 @@ Changes since v1:
  /* RT2800 driver data structure */
  struct rt2800_drv_data {
  	u8 calibration_bw20;
-@@ -29,6 +33,8 @@ struct rt2800_drv_data {
- 	u8 txmixer_gain_24g;
+@@ -32,6 +36,8 @@ struct rt2800_drv_data {
  	u8 txmixer_gain_5g;
  	unsigned int tbtt_tick;
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
 +
 +	unsigned long rt2800_flags;
  };
  
  struct rt2800_ops {
-@@ -61,6 +67,13 @@ struct rt2800_ops {
+@@ -64,6 +70,13 @@ struct rt2800_ops {
  	__le32 *(*drv_get_txwi)(struct queue_entry *entry);
  };
  
diff --git a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
index 9f8dfcc..5671515 100644
--- a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
+++ b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch
@@ -175,7 +175,7 @@ Changes since v1: ---
  
  	/*
  	 * Update WCID information
-@@ -1437,8 +1467,11 @@ int rt2800_config_pairwise_key(struct rt
+@@ -1405,8 +1435,11 @@ int rt2800_config_pairwise_key(struct rt
  		       sizeof(key_entry.rx_mic));
  
  		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
@@ -187,7 +187,7 @@ Changes since v1: ---
  	}
  
  	/*
-@@ -4908,14 +4941,19 @@ static int rt2800_init_registers(struct
+@@ -4884,14 +4917,19 @@ static int rt2800_init_registers(struct
  	/*
  	 * ASIC will keep garbage value after boot, clear encryption keys.
  	 */
@@ -207,7 +207,7 @@ Changes since v1: ---
  	}
  
  	/*
-@@ -5041,8 +5079,10 @@ static int rt2800_wait_bbp_ready(struct
+@@ -5017,8 +5055,10 @@ static int rt2800_wait_bbp_ready(struct
  	 * BBP was enabled after firmware was loaded,
  	 * but we need to reactivate it now.
  	 */
@@ -218,7 +218,7 @@ Changes since v1: ---
  	msleep(1);
  
  	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-@@ -6738,11 +6778,19 @@ int rt2800_enable_radio(struct rt2x00_de
+@@ -6714,11 +6754,19 @@ int rt2800_enable_radio(struct rt2x00_de
  	/*
  	 * Send signal during boot time to initialize firmware.
  	 */
@@ -239,7 +239,7 @@ Changes since v1: ---
  	msleep(1);
  
  	/*
-@@ -7751,6 +7799,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7725,6 +7773,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	int retval;
  	u32 reg;
  
@@ -248,22 +248,22 @@ Changes since v1: ---
  	retval = rt2800_probe_rt(rt2x00dev);
  	if (retval)
  		return retval;
-@@ -7830,8 +7880,11 @@ void rt2800_get_tkip_seq(struct ieee8021
- 	u32 offset;
+@@ -7808,8 +7858,11 @@ void rt2800_get_key_seq(struct ieee80211
+ 		return;
  
- 	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+ 	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
 +
 +	rt2800_shared_mem_lock(rt2x00dev);
  	rt2800_register_multiread(rt2x00dev, offset,
  				      &iveiv_entry, sizeof(iveiv_entry));
 +	rt2800_shared_mem_unlock(rt2x00dev);
  
- 	memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
- 	memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
+ 	memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
+ 	memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
 --- a/drivers/net/wireless/rt2x00/rt2800lib.h
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -35,6 +35,11 @@ struct rt2800_drv_data {
- 	unsigned int tbtt_tick;
+@@ -38,6 +38,11 @@ struct rt2800_drv_data {
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
  
  	unsigned long rt2800_flags;
 +
@@ -274,7 +274,7 @@ Changes since v1: ---
  };
  
  struct rt2800_ops {
-@@ -65,6 +70,10 @@ struct rt2800_ops {
+@@ -68,6 +73,10 @@ struct rt2800_ops {
  				  const u8 *data, const size_t len);
  	int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
  	__le32 *(*drv_get_txwi)(struct queue_entry *entry);
@@ -285,7 +285,7 @@ Changes since v1: ---
  };
  
  static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev)
-@@ -74,6 +83,29 @@ static inline bool rt2800_has_high_share
+@@ -77,6 +86,29 @@ static inline bool rt2800_has_high_share
  	return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  }
  
@@ -486,7 +486,7 @@ Changes since v1: ---
  /*
   * Queue handlers.
   */
-@@ -294,8 +315,10 @@ static int rt2800usb_write_firmware(stru
+@@ -299,8 +320,10 @@ static int rt2800usb_write_firmware(stru
  					      data + offset, length);
  	}
  
@@ -497,7 +497,7 @@ Changes since v1: ---
  
  	/*
  	 * Send firmware request to device to load firmware,
-@@ -310,7 +333,10 @@ static int rt2800usb_write_firmware(stru
+@@ -315,7 +338,10 @@ static int rt2800usb_write_firmware(stru
  	}
  
  	msleep(10);
@@ -508,7 +508,7 @@ Changes since v1: ---
  
  	return 0;
  }
-@@ -328,8 +354,10 @@ static int rt2800usb_init_registers(stru
+@@ -333,8 +359,10 @@ static int rt2800usb_init_registers(stru
  	if (rt2800_wait_csr_ready(rt2x00dev))
  		return -EBUSY;
  
@@ -519,7 +519,7 @@ Changes since v1: ---
  
  	reg = 0;
  	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-@@ -859,6 +887,9 @@ static const struct rt2800_ops rt2800usb
+@@ -863,6 +891,9 @@ static const struct rt2800_ops rt2800usb
  	.drv_write_firmware	= rt2800usb_write_firmware,
  	.drv_init_registers	= rt2800usb_init_registers,
  	.drv_get_txwi		= rt2800usb_get_txwi,
diff --git a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
index e7eb630..d04998a 100644
--- a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
+++ b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch
@@ -24,7 +24,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4638,6 +4638,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+@@ -4614,6 +4614,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
   */
  static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	u32 reg;
  	u16 eeprom;
  	unsigned int i;
-@@ -5003,7 +5004,7 @@ static int rt2800_init_registers(struct
+@@ -4979,7 +4980,7 @@ static int rt2800_init_registers(struct
  	/*
  	 * Clear all beacons
  	 */
@@ -41,7 +41,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		rt2800_clear_beacon_register(rt2x00dev, i);
  
  	if (rt2x00_is_usb(rt2x00dev)) {
-@@ -7852,6 +7853,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7826,6 +7827,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
@@ -52,11 +52,11 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	 */
 --- a/drivers/net/wireless/rt2x00/rt2800lib.h
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -33,6 +33,7 @@ struct rt2800_drv_data {
+@@ -35,6 +35,7 @@ struct rt2800_drv_data {
  	u8 txmixer_gain_24g;
  	u8 txmixer_gain_5g;
  	unsigned int tbtt_tick;
 +	unsigned int hw_beacon_count;
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
  
  	unsigned long rt2800_flags;
- 
diff --git a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
index b79b4be..f5231f0 100644
--- a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
+++ b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch
@@ -34,7 +34,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
   */
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4650,6 +4650,30 @@ static int rt2800_init_registers(struct
+@@ -4626,6 +4626,30 @@ static int rt2800_init_registers(struct
  	if (ret)
  		return ret;
  
diff --git a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
index 180c5e3..4b21eae 100644
--- a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
+++ b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7877,7 +7877,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7851,7 +7851,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
diff --git a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
index 31aa34a..e77cd86 100644
--- a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7847,6 +7847,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7821,6 +7821,7 @@ static int rt2800_probe_rt(struct rt2x00
  	case RT3390:
  	case RT3572:
  	case RT3593:
diff --git a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
index a90c590..780c1dd 100644
--- a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
@@ -31,7 +31,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define RF5370				0x5370
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7465,6 +7465,66 @@ static const struct rf_channel rf_vals_3
+@@ -7441,6 +7441,66 @@ static const struct rf_channel rf_vals_3
  	{173, 0x61, 0, 9},
  };
  
@@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static const struct rf_channel rf_vals_5592_xtal20[] = {
  	/* Channel, N, K, mod, R */
  	{1, 482, 4, 10, 3},
-@@ -7694,6 +7754,11 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7668,6 +7728,11 @@ static int rt2800_probe_hw_mode(struct r
  		spec->channels = rf_vals_3x;
  		break;
  
diff --git a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
index ab2673b..858dece 100644
--- a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4402,6 +4402,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4378,6 +4378,7 @@ void rt2800_vco_calibration(struct rt2x0
  	case RF3053:
  	case RF3070:
  	case RF3290:
@@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -7873,6 +7874,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7847,6 +7848,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3053:
  	case RF3070:
  	case RF3290:
diff --git a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
index 05ed444..ed82e44 100644
--- a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
+++ b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -2649,6 +2649,211 @@ static void rt2800_config_channel_rf3053
+@@ -2625,6 +2625,211 @@ static void rt2800_config_channel_rf3053
  	}
  }
  
@@ -223,7 +223,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define POWER_BOUND		0x27
  #define POWER_BOUND_5G		0x2b
  
-@@ -3261,6 +3466,9 @@ static void rt2800_config_channel(struct
+@@ -3237,6 +3442,9 @@ static void rt2800_config_channel(struct
  	case RF3322:
  		rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
  		break;
diff --git a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
index 3b50775..33cbc4c 100644
--- a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
+++ b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7430,6 +7430,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7406,6 +7406,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF3290:
  	case RF3320:
  	case RF3322:
diff --git a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
index 4dfb068..c3a4798 100644
--- a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
@@ -35,7 +35,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  #define RX_FILTER_CFG			0x1400
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5005,6 +5005,12 @@ static int rt2800_init_registers(struct
+@@ -4981,6 +4981,12 @@ static int rt2800_init_registers(struct
  			rt2800_register_write(rt2x00dev, TX_SW_CFG2,
  					      0x00000000);
  		}
@@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
  		   rt2x00_rt(rt2x00dev, RT5392) ||
  		   rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5035,9 +5041,11 @@ static int rt2800_init_registers(struct
+@@ -5011,9 +5017,11 @@ static int rt2800_init_registers(struct
  
  	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
  	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
@@ -63,7 +63,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
  	else
  		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
-@@ -5190,6 +5198,11 @@ static int rt2800_init_registers(struct
+@@ -5166,6 +5174,11 @@ static int rt2800_init_registers(struct
  	reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
  	rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
  
diff --git a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
index 6663b78..e647777 100644
--- a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5808,6 +5808,47 @@ static void rt2800_init_bbp_3593(struct
+@@ -5784,6 +5784,47 @@ static void rt2800_init_bbp_3593(struct
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  
@@ -59,7 +59,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
  {
  	int ant, div_mode;
-@@ -6026,6 +6067,9 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6002,6 +6043,9 @@ static void rt2800_init_bbp(struct rt2x0
  	case RT3593:
  		rt2800_init_bbp_3593(rt2x00dev);
  		return;
diff --git a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
index 6e66f14..0fec3cd 100644
--- a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
@@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -6843,6 +6843,144 @@ static void rt2800_init_rfcsr_3593(struc
+@@ -6819,6 +6819,144 @@ static void rt2800_init_rfcsr_3593(struc
  	/* TODO: enable stream mode support */
  }
  
@@ -166,7 +166,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
  {
  	rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7074,6 +7212,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7050,6 +7188,9 @@ static void rt2800_init_rfcsr(struct rt2
  	case RT3390:
  		rt2800_init_rfcsr_3390(rt2x00dev);
  		break;
diff --git a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
index 9390f7e..c9d1e06 100644
--- a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7611,6 +7611,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7587,6 +7587,8 @@ static int rt2800_init_eeprom(struct rt2
  	    rt2x00_rt(rt2x00dev, RT5390) ||
  	    rt2x00_rt(rt2x00dev, RT5392))
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
diff --git a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
index 1cba4f6..12b9c33 100644
--- a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
+++ b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3429,6 +3429,36 @@ static char rt2800_txpower_to_dev(struct
+@@ -3405,6 +3405,36 @@ static char rt2800_txpower_to_dev(struct
  		return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
  }
  
@@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
  				  struct ieee80211_conf *conf,
  				  struct rf_channel *rf,
-@@ -3447,6 +3477,12 @@ static void rt2800_config_channel(struct
+@@ -3423,6 +3453,12 @@ static void rt2800_config_channel(struct
  			rt2800_txpower_to_dev(rt2x00dev, rf->channel,
  					      info->default_power3);
  
@@ -60,7 +60,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	switch (rt2x00dev->chip.rf) {
  	case RF2020:
  	case RF3020:
-@@ -3530,6 +3566,15 @@ static void rt2800_config_channel(struct
+@@ -3506,6 +3542,15 @@ static void rt2800_config_channel(struct
  		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 77, 0x98);
@@ -76,7 +76,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  	} else {
  		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
  		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -3542,6 +3587,7 @@ static void rt2800_config_channel(struct
+@@ -3518,6 +3563,7 @@ static void rt2800_config_channel(struct
  		    !rt2x00_rt(rt2x00dev, RT5392)) {
  			if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
  				rt2800_bbp_write(rt2x00dev, 82, 0x62);
@@ -84,7 +84,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  				rt2800_bbp_write(rt2x00dev, 75, 0x46);
  			} else {
  				if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3550,19 +3596,22 @@ static void rt2800_config_channel(struct
+@@ -3526,19 +3572,22 @@ static void rt2800_config_channel(struct
  					rt2800_bbp_write(rt2x00dev, 82, 0x84);
  				rt2800_bbp_write(rt2x00dev, 75, 0x50);
  			}
@@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_bbp_write(rt2x00dev, 83, 0x9a);
  
  		if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -3684,6 +3733,23 @@ static void rt2800_config_channel(struct
+@@ -3660,6 +3709,23 @@ static void rt2800_config_channel(struct
  
  		rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
  
diff --git a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
index 1773128..3f40b4e 100644
--- a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3416,13 +3416,15 @@ static char rt2800_txpower_to_dev(struct
+@@ -3392,13 +3392,15 @@ static char rt2800_txpower_to_dev(struct
  				  unsigned int channel,
  				  char txpower)
  {
diff --git a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
index 36f0a4c..52baeec 100644
--- a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
+++ b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4635,7 +4635,8 @@ static void rt2800_config_txpower(struct
+@@ -4611,7 +4611,8 @@ static void rt2800_config_txpower(struct
  				  struct ieee80211_channel *chan,
  				  int power_level)
  {
diff --git a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
index 8119f97..b9dafc6 100644
--- a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
+++ b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7493,7 +7493,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+@@ -7469,7 +7469,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
  {
  	u16 word;
  
@@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		return 0;
  
  	rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
-@@ -7507,7 +7508,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+@@ -7483,7 +7484,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
  {
  	u16 word;
  
diff --git a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
index dfbdee7..f09f803 100644
--- a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8428,7 +8428,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8402,7 +8402,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
  
diff --git a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
index 22f7110..f7d23fc 100644
--- a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1961,7 +1961,8 @@ void rt2800_config_ant(struct rt2x00_dev
+@@ -1937,7 +1937,8 @@ void rt2800_config_ant(struct rt2x00_dev
  	rt2800_bbp_write(rt2x00dev, 3, r3);
  	rt2800_bbp_write(rt2x00dev, 1, r1);
  
diff --git a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
index 9945f38..4da750e 100644
--- a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
+++ b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1984,7 +1984,8 @@ static void rt2800_config_lna_gain(struc
+@@ -1960,7 +1960,8 @@ static void rt2800_config_lna_gain(struc
  		rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
  		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
  	} else if (libconf->rf.channel <= 128) {
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
  			lna_gain = rt2x00_get_field16(eeprom,
  						      EEPROM_EXT_LNA2_A1);
-@@ -1994,7 +1995,8 @@ static void rt2800_config_lna_gain(struc
+@@ -1970,7 +1971,8 @@ static void rt2800_config_lna_gain(struc
  						      EEPROM_RSSI_BG2_LNA_A1);
  		}
  	} else {
diff --git a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
index beadea8..628b237 100644
--- a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4835,7 +4835,8 @@ static u8 rt2800_get_default_vgc(struct
+@@ -4811,7 +4811,8 @@ static u8 rt2800_get_default_vgc(struct
  		else
  			vgc = 0x2e + rt2x00dev->lna_gain;
  	} else { /* 5GHZ band */
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
  		else if (rt2x00_rt(rt2x00dev, RT5592))
  			vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -4855,7 +4856,8 @@ static inline void rt2800_set_vgc(struct
+@@ -4831,7 +4832,8 @@ static inline void rt2800_set_vgc(struct
  {
  	if (qual->vgc_level != vgc_level) {
  		if (rt2x00_rt(rt2x00dev, RT3572) ||
@@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  			rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
  						       vgc_level);
  		} else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -4902,6 +4904,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -4878,6 +4880,11 @@ void rt2800_link_tuner(struct rt2x00_dev
  		}
  		break;
  
diff --git a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
index a6c0f58..216b8b6 100644
--- a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7630,7 +7630,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7606,7 +7606,8 @@ static int rt2800_validate_eeprom(struct
  	rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
  	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
  		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
  		    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
  			rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -7650,7 +7651,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7626,7 +7627,8 @@ static int rt2800_validate_eeprom(struct
  	rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
  	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
  		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
@@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  		if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
  		    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
  			rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -7658,7 +7660,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7634,7 +7636,8 @@ static int rt2800_validate_eeprom(struct
  	}
  	rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
  
diff --git a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
index 910f9ec..515086f 100644
--- a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4005,6 +4005,9 @@ static u8 rt2800_compensate_txpower(stru
+@@ -3981,6 +3981,9 @@ static u8 rt2800_compensate_txpower(stru
  	if (rt2x00_rt(rt2x00dev, RT3593))
  		return min_t(u8, txpower, 0xc);
  
diff --git a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
index bcdfc67..77e3f1b 100644
--- a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
+++ b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8441,7 +8441,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8415,7 +8415,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	if (retval)
  		return retval;
  
diff --git a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
index 8f650a2..44b629f 100644
--- a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
+++ b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
@@ -1,13 +1,13 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -263,6 +263,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -312,6 +312,7 @@ RT2X00_LIB_FIRMWARE=
  RT2X00_LIB_CRYPTO=
  RT2X00_LIB_LEDS=
  RT2X00_LIB_DEBUGFS=
 +RT2X00_LIB_EEPROM=
  RT2X00_DEBUG=
- RTL_CARDS=
- RTL8192CE=
+ WL_MEDIATEK=
+ MT7601U=
 --- a/drivers/net/wireless/rt2x00/Kconfig
 +++ b/drivers/net/wireless/rt2x00/Kconfig
 @@ -69,6 +69,7 @@ config RT2800PCI
@@ -48,7 +48,7 @@
  obj-$(CPTCFG_RT2X00_LIB_MMIO)		+= rt2x00mmio.o
 --- a/drivers/net/wireless/rt2x00/rt2800lib.h
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -43,6 +43,8 @@ struct rt2800_drv_data {
+@@ -46,6 +46,8 @@ struct rt2800_drv_data {
  	} shmem_lock;
  };
  
@@ -57,7 +57,7 @@
  struct rt2800_ops {
  	void (*register_read)(struct rt2x00_dev *rt2x00dev,
  			      const unsigned int offset, u32 *value);
-@@ -176,6 +178,15 @@ static inline int rt2800_read_eeprom(str
+@@ -179,6 +181,15 @@ static inline int rt2800_read_eeprom(str
  {
  	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
  
diff --git a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
index a35bd55..16a579d 100644
--- a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
+++ b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch
@@ -41,7 +41,7 @@
   * Interrupt context handlers.
 --- a/drivers/net/wireless/rt2x00/rt61pci.c
 +++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -2392,6 +2392,7 @@ static int rt61pci_validate_eeprom(struc
+@@ -2390,6 +2390,7 @@ static int rt61pci_validate_eeprom(struc
  	u32 reg;
  	u16 word;
  	u8 *mac;
@@ -49,7 +49,7 @@
  	s8 value;
  
  	rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, &reg);
-@@ -2412,7 +2413,11 @@ static int rt61pci_validate_eeprom(struc
+@@ -2410,7 +2411,11 @@ static int rt61pci_validate_eeprom(struc
  	/*
  	 * Start validation of the data that has been read.
  	 */
diff --git a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
index 067d2ea..39b1ccc 100644
--- a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
+++ b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3552,11 +3552,18 @@ static void rt2800_config_channel(struct
+@@ -3528,11 +3528,18 @@ static void rt2800_config_channel(struct
  	/*
  	 * Change BBP settings
  	 */
@@ -19,7 +19,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT3593)) {
  		if (rf->channel > 14) {
  			/* Disable CCK Packet detection on 5GHz */
-@@ -6618,6 +6625,12 @@ static void rt2800_init_rfcsr_3290(struc
+@@ -6594,6 +6601,12 @@ static void rt2800_init_rfcsr_3290(struc
  
  static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
  {
@@ -32,7 +32,7 @@
  	rt2800_rf_init_calibration(rt2x00dev, 30);
  
  	rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
-@@ -6653,15 +6666,30 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6629,15 +6642,30 @@ static void rt2800_init_rfcsr_3352(struc
  	rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
  	rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
  	rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
@@ -66,7 +66,7 @@
  	rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
  	rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
  	rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
-@@ -6669,15 +6697,20 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6645,15 +6673,20 @@ static void rt2800_init_rfcsr_3352(struc
  	rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
  	rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
  	rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
@@ -96,7 +96,7 @@
  	rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
  	rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
  	rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-@@ -7698,6 +7731,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7674,6 +7707,7 @@ static int rt2800_init_eeprom(struct rt2
  	 * RT53xx: defined in "EEPROM_CHIP_ID" field
  	 */
  	if (rt2x00_rt(rt2x00dev, RT3290) ||
@@ -104,7 +104,7 @@
  	    rt2x00_rt(rt2x00dev, RT5390) ||
  	    rt2x00_rt(rt2x00dev, RT5392))
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
-@@ -7793,7 +7827,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7769,7 +7803,8 @@ static int rt2800_init_eeprom(struct rt2
  	/*
  	 * Detect if this device has Bluetooth co-existence.
  	 */
@@ -114,7 +114,7 @@
  		__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
  
  	/*
-@@ -7822,6 +7857,22 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7798,6 +7833,22 @@ static int rt2800_init_eeprom(struct rt2
  					EIRP_MAX_TX_POWER_LIMIT)
  		__set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
  
diff --git a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
index 1dcca36..dcecba4 100644
--- a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
+++ b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8209,6 +8209,27 @@ static const struct rf_channel rf_vals_5
+@@ -8185,6 +8185,27 @@ static const struct rf_channel rf_vals_5
  	{196, 83, 0, 12, 1},
  };
  
@@ -28,7 +28,7 @@
  static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
  {
  	struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -8297,7 +8318,10 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8271,7 +8292,10 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5390:
  	case RF5392:
  		spec->num_channels = 14;
@@ -40,7 +40,7 @@
  		break;
  
  	case RF3052:
-@@ -8481,6 +8505,19 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8455,6 +8479,19 @@ static int rt2800_probe_rt(struct rt2x00
  	return 0;
  }
  
@@ -60,7 +60,7 @@
  int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
  {
  	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-@@ -8523,6 +8560,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8497,6 +8534,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
  	rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
  
  	/*
diff --git a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
index c779a17..9f11862 100644
--- a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
+++ b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -8507,13 +8508,14 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8481,13 +8482,14 @@ static int rt2800_probe_rt(struct rt2x00
  
  int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev)
  {
diff --git a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
index 840b3bc..9679d71 100644
--- a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
+++ b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
@@ -10,7 +10,7 @@
  #define RF5370				0x5370
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3038,6 +3038,13 @@ static void rt2800_config_channel_rf53xx
+@@ -3014,6 +3014,13 @@ static void rt2800_config_channel_rf53xx
  
  				rt2800_rfcsr_write(rt2x00dev, 59,
  						   r59_non_bt[idx]);
@@ -24,7 +24,7 @@
  			}
  		}
  	}
-@@ -3516,6 +3523,7 @@ static void rt2800_config_channel(struct
+@@ -3492,6 +3499,7 @@ static void rt2800_config_channel(struct
  		rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
  		break;
  	case RF3070:
@@ -32,7 +32,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -3534,6 +3542,7 @@ static void rt2800_config_channel(struct
+@@ -3510,6 +3518,7 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rf(rt2x00dev, RF3070) ||
  	    rt2x00_rf(rt2x00dev, RF3290) ||
  	    rt2x00_rf(rt2x00dev, RF3322) ||
@@ -40,7 +40,7 @@
  	    rt2x00_rf(rt2x00dev, RF5360) ||
  	    rt2x00_rf(rt2x00dev, RF5362) ||
  	    rt2x00_rf(rt2x00dev, RF5370) ||
-@@ -3812,7 +3821,8 @@ static void rt2800_config_channel(struct
+@@ -3788,7 +3797,8 @@ static void rt2800_config_channel(struct
  	/*
  	 * Clear update flag
  	 */
@@ -50,7 +50,7 @@
  		rt2800_bbp_read(rt2x00dev, 49, &bbp);
  		rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
  		rt2800_bbp_write(rt2x00dev, 49, bbp);
-@@ -4698,6 +4708,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4674,6 +4684,7 @@ void rt2800_vco_calibration(struct rt2x0
  	case RF3070:
  	case RF3290:
  	case RF3853:
@@ -58,7 +58,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -5111,6 +5122,8 @@ static int rt2800_init_registers(struct
+@@ -5087,6 +5098,8 @@ static int rt2800_init_registers(struct
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -67,7 +67,7 @@
  	} else {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
  		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-@@ -5766,9 +5779,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5742,9 +5755,13 @@ static void rt2800_init_bbp_3352(struct
  
  	rt2800_bbp_write(rt2x00dev, 82, 0x62);
  
@@ -84,7 +84,7 @@
  
  	rt2800_bbp_write(rt2x00dev, 86, 0x38);
  
-@@ -5782,9 +5799,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5758,9 +5775,13 @@ static void rt2800_init_bbp_3352(struct
  
  	rt2800_bbp_write(rt2x00dev, 104, 0x92);
  
@@ -101,7 +101,7 @@
  
  	rt2800_bbp_write(rt2x00dev, 120, 0x50);
  
-@@ -5809,6 +5830,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5785,6 +5806,13 @@ static void rt2800_init_bbp_3352(struct
  	rt2800_bbp_write(rt2x00dev, 143, 0xa2);
  
  	rt2800_bbp_write(rt2x00dev, 148, 0xc8);
@@ -115,7 +115,7 @@
  }
  
  static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
-@@ -6150,6 +6178,7 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6126,6 +6154,7 @@ static void rt2800_init_bbp(struct rt2x0
  		rt2800_init_bbp_3290(rt2x00dev);
  		break;
  	case RT3352:
@@ -123,7 +123,7 @@
  		rt2800_init_bbp_3352(rt2x00dev);
  		break;
  	case RT3390:
-@@ -7101,6 +7130,76 @@ static void rt2800_init_rfcsr_3883(struc
+@@ -7077,6 +7106,76 @@ static void rt2800_init_rfcsr_3883(struc
  	rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
  }
  
@@ -200,7 +200,7 @@
  static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
  {
  	rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7341,6 +7440,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7317,6 +7416,9 @@ static void rt2800_init_rfcsr(struct rt2
  	case RT3593:
  		rt2800_init_rfcsr_3593(rt2x00dev);
  		break;
@@ -210,7 +210,7 @@
  	case RT5390:
  		rt2800_init_rfcsr_5390(rt2x00dev);
  		break;
-@@ -7600,6 +7702,12 @@ static int rt2800_validate_eeprom(struct
+@@ -7576,6 +7678,12 @@ static int rt2800_validate_eeprom(struct
  		rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
  		rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
  		rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
@@ -223,7 +223,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT2860) ||
  		   rt2x00_rt(rt2x00dev, RT2872)) {
  		/*
-@@ -7738,6 +7846,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7714,6 +7822,8 @@ static int rt2800_init_eeprom(struct rt2
  		rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
  	else if (rt2x00_rt(rt2x00dev, RT3883))
  		rf = RF3853;
@@ -232,7 +232,7 @@
  	else
  		rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
  
-@@ -7757,6 +7867,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7733,6 +7843,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF3320:
  	case RF3322:
  	case RF3853:
@@ -240,7 +240,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8312,6 +8423,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8286,6 +8397,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3290:
  	case RF3320:
  	case RF3322:
@@ -248,7 +248,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8451,6 +8563,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8425,6 +8537,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF3070:
  	case RF3290:
  	case RF3853:
@@ -256,7 +256,7 @@
  	case RF5360:
  	case RF5362:
  	case RF5370:
-@@ -8491,6 +8604,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8465,6 +8578,7 @@ static int rt2800_probe_rt(struct rt2x00
  	case RT3572:
  	case RT3593:
  	case RT3883:
diff --git a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
index 13f2048..b085c5e 100644
--- a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
+++ b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -7957,6 +7958,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7933,6 +7934,17 @@ static int rt2800_init_eeprom(struct rt2
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
  
diff --git a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
index aaa8367..259cb1f 100644
--- a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
+++ b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7841,10 +7841,11 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7817,10 +7817,11 @@ static int rt2800_init_eeprom(struct rt2
  	 * RT53xx: defined in "EEPROM_CHIP_ID" field
  	 */
  	if (rt2x00_rt(rt2x00dev, RT3290) ||
diff --git a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
index bb2fc1c..77d63fe 100644
--- a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
+++ b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch
@@ -11,7 +11,7 @@
   * RFCSR 31:
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3551,8 +3551,13 @@ static void rt2800_config_channel(struct
+@@ -3527,8 +3527,13 @@ static void rt2800_config_channel(struct
  	    rt2x00_rf(rt2x00dev, RF5390) ||
  	    rt2x00_rf(rt2x00dev, RF5392)) {
  		rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
index 9e29034..3b8b756 100644
--- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
+++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/libertas/cfg.c
 +++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
+@@ -2083,6 +2083,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
  		goto err_wiphy_new;
  	}
  
diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
index 252fa81..dace56b 100644
--- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
+++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/libertas/cfg.c
 +++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private
+@@ -2173,6 +2173,8 @@ int lbs_cfg_register(struct lbs_private
  	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
  	wdev->wiphy->reg_notifier = lbs_reg_notifier;
  
diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
index ac58dba..dd82ce5 100644
--- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
+++ b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
@@ -9,7 +9,7 @@
  	antenna = b43_antenna_to_phyctl(antenna);
  	ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
  	/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3302,8 +3302,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3300,8 +3300,8 @@ static int b43_chip_init(struct b43_wlde
  
  	/* Select the antennae */
  	if (phy->ops->set_rx_antenna)
@@ -20,7 +20,7 @@
  
  	if (phy->type == B43_PHYTYPE_B) {
  		value16 = b43_read16(dev, 0x005E);
-@@ -4003,7 +4003,6 @@ static int b43_op_config(struct ieee8021
+@@ -4001,7 +4001,6 @@ static int b43_op_config(struct ieee8021
  	struct b43_wldev *dev = wl->current_dev;
  	struct b43_phy *phy = &dev->phy;
  	struct ieee80211_conf *conf = &hw->conf;
@@ -28,7 +28,7 @@
  	int err = 0;
  
  	mutex_lock(&wl->mutex);
-@@ -4046,11 +4045,9 @@ static int b43_op_config(struct ieee8021
+@@ -4044,11 +4043,9 @@ static int b43_op_config(struct ieee8021
  	}
  
  	/* Antennas for RX and management frame TX. */
@@ -42,7 +42,7 @@
  
  	if (wl->radio_enabled != phy->radio_on) {
  		if (wl->radio_enabled) {
-@@ -5213,6 +5210,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee
  	return 0;
  }
  
@@ -90,7 +90,7 @@
  static const struct ieee80211_ops b43_hw_ops = {
  	.tx			= b43_op_tx,
  	.conf_tx		= b43_op_conf_tx,
-@@ -5234,6 +5272,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw
  	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
  	.get_survey		= b43_op_get_survey,
  	.rfkill_poll		= b43_rfkill_poll,
@@ -99,7 +99,7 @@
  };
  
  /* Hard-reset the chip. Do not call this directly.
-@@ -5542,6 +5582,8 @@ static int b43_one_core_attach(struct b4
+@@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4
  	if (!wldev)
  		goto out;
  
@@ -108,7 +108,7 @@
  	wldev->use_pio = b43_modparam_pio;
  	wldev->dev = dev;
  	wldev->wl = wl;
-@@ -5632,6 +5674,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init(
  
  	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
  
diff --git a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
index 1cba2b3..5fdfa37 100644
--- a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
+++ b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
@@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -691,9 +691,37 @@ static struct wireless_dev *brcmf_cfg802
+@@ -692,9 +692,37 @@ static struct wireless_dev *brcmf_cfg802
  						     u32 *flags,
  						     struct vif_params *params)
  {
diff --git a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch b/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch
deleted file mode 100644
index 856dea8..0000000
--- a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-When running with DT, we no longer have a board file that can set up the
-platform data for wlcore. Allow this data to be passed from DT.
-
-Since some platforms use a gpio-irq, add support for passing either the
-irq number or the gpio number. For the latter case, the driver will
-request the gpio and convert it to the irq number. If an irq is
-specified, it'll be used as is.
-
-[Arik - the pdev_data pointer does not belong to us and is freed when
-the device is released. Dereference to our private data first.]
-
-Signed-off-by: Ido Yariv <ido@wizery.com>
-Signed-off-by: Arik Nemtsov <arik@wizery.com>
----
- drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
- include/linux/wl12xx.h                |  3 +-
- 2 files changed, 67 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/ti/wlcore/sdio.c
-+++ b/drivers/net/wireless/ti/wlcore/sdio.c
-@@ -34,6 +34,7 @@
- #include <linux/wl12xx.h>
- #include <linux/pm_runtime.h>
- #include <linux/printk.h>
-+#include <linux/of.h>
- 
- #include "wlcore.h"
- #include "wl12xx_80211.h"
-@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
- 	.set_block_size = wl1271_sdio_set_block_size,
- };
- 
-+static const struct of_device_id wlcore_of_match[] = {
-+	{
-+		.compatible = "wlcore",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, wlcore_of_match);
-+
-+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
-+{
-+	struct wl12xx_platform_data *pdata;
-+	struct device_node *np;
-+	u32 gpio;
-+
-+	pdata = wl12xx_get_platform_data();
-+	if (!IS_ERR(pdata))
-+		return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
-+
-+	np = of_find_matching_node(NULL, wlcore_of_match);
-+	if (!np) {
-+		dev_err(dev, "No platform data set\n");
-+		return NULL;
-+	}
-+
-+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+	if (!pdata) {
-+		dev_err(dev, "Can't allocate platform data\n");
-+		return NULL;
-+	}
-+
-+	if (of_property_read_u32(np, "irq", &pdata->irq)) {
-+		if (!of_property_read_u32(np, "gpio", &gpio) &&
-+		    !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
-+			pdata->gpio = gpio;
-+			pdata->irq = gpio_to_irq(gpio);
-+		}
-+	}
-+
-+	/* Optional fields */
-+	pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
-+	of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
-+	of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
-+	of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
-+
-+	return pdata;
-+}
-+
-+static void del_platform_data(struct wl12xx_platform_data *pdata)
-+{
-+	if (pdata->gpio)
-+		gpio_free(pdata->gpio);
-+
-+	kfree(pdata);
-+}
-+
- static int wl1271_probe(struct sdio_func *func,
- 				  const struct sdio_device_id *id)
- {
-@@ -245,10 +301,10 @@ static int wl1271_probe(struct sdio_func
- 	/* Use block mode for transferring over one block size of data */
- 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- 
--	pdev_data.pdata = wl12xx_get_platform_data();
--	if (IS_ERR(pdev_data.pdata)) {
--		ret = PTR_ERR(pdev_data.pdata);
--		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
-+	pdev_data.pdata = get_platform_data(&func->dev);
-+	if (!pdev_data.pdata) {
-+		ret = -EINVAL;
-+		dev_err(glue->dev, "missing wlan platform data\n");
- 		goto out_free_glue;
- 	}
- 
-@@ -279,7 +335,7 @@ static int wl1271_probe(struct sdio_func
- 	if (!glue->core) {
- 		dev_err(glue->dev, "can't allocate platform_device");
- 		ret = -ENOMEM;
--		goto out_free_glue;
-+		goto out_free_pdata;
- 	}
- 
- 	glue->core->dev.parent = &func->dev;
-@@ -313,6 +369,9 @@ static int wl1271_probe(struct sdio_func
- out_dev_put:
- 	platform_device_put(glue->core);
- 
-+out_free_pdata:
-+	del_platform_data(pdev_data->pdata);
-+
- out_free_glue:
- 	kfree(glue);
- 
-@@ -323,11 +382,14 @@ out:
- static void wl1271_remove(struct sdio_func *func)
- {
- 	struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
-+	struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
-+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
- 
- 	/* Undo decrement done above in wl1271_probe */
- 	pm_runtime_get_noresume(&func->dev);
- 
- 	platform_device_unregister(glue->core);
-+	del_platform_data(pdata);
- 	kfree(glue);
- }
- 
diff --git a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
index 501910f..b0536ce 100644
--- a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
+++ b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
@@ -210,7 +210,7 @@
  	case RT5592:
  		*txwi_size = TXWI_DESC_SIZE_5WORDS;
  		*rxwi_size = RXWI_DESC_SIZE_6WORDS;
-@@ -3326,6 +3399,312 @@ static void rt2800_config_channel_rf55xx
+@@ -3302,6 +3375,312 @@ static void rt2800_config_channel_rf55xx
  	rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
  }
  
@@ -258,6 +258,7 @@
 +	u32 mac_sys_ctrl, mac_status;
 +	u32 tx_pin = 0x00150F0F;
 +	struct hw_mode_spec *spec = &rt2x00dev->spec;
++	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 +
 +	/* Frequeny plan setting */
 +	/*	
@@ -383,7 +384,6 @@
 +		rfcsr &= (~0x4);
 +	rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
 +
-+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 +	/*if (bScan == FALSE)*/
 +	if (conf_is_ht40(conf)) {
 +		txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
@@ -523,7 +523,7 @@
  static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
  					   const unsigned int word,
  					   const u8 value)
-@@ -3482,7 +3861,7 @@ static void rt2800_config_channel(struct
+@@ -3458,7 +3837,7 @@ static void rt2800_config_channel(struct
  				  struct channel_info *info)
  {
  	u32 reg;
@@ -532,7 +532,7 @@
  	u8 bbp, rfcsr;
  
  	info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
-@@ -3536,6 +3915,9 @@ static void rt2800_config_channel(struct
+@@ -3512,6 +3891,9 @@ static void rt2800_config_channel(struct
  	case RF5592:
  		rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
  		break;
@@ -542,7 +542,7 @@
  	default:
  		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
  	}
-@@ -3638,7 +4020,7 @@ static void rt2800_config_channel(struct
+@@ -3614,7 +3996,7 @@ static void rt2800_config_channel(struct
  		else if (rt2x00_rt(rt2x00dev, RT3593) ||
  			 rt2x00_rt(rt2x00dev, RT3883))
  			rt2800_bbp_write(rt2x00dev, 82, 0x82);
@@ -551,7 +551,7 @@
  			rt2800_bbp_write(rt2x00dev, 82, 0xf2);
  
  		if (rt2x00_rt(rt2x00dev, RT3593) ||
-@@ -3660,7 +4042,7 @@ static void rt2800_config_channel(struct
+@@ -3636,7 +4018,7 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rt(rt2x00dev, RT3572))
  		rt2800_rfcsr_write(rt2x00dev, 8, 0);
  
@@ -560,7 +560,7 @@
  
  	switch (rt2x00dev->default_ant.tx_chain_num) {
  	case 3:
-@@ -3709,6 +4091,7 @@ static void rt2800_config_channel(struct
+@@ -3685,6 +4067,7 @@ static void rt2800_config_channel(struct
  
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
@@ -568,7 +568,7 @@
  
  	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
  
-@@ -4725,6 +5108,14 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4701,6 +5084,14 @@ void rt2800_vco_calibration(struct rt2x0
  		rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
  		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
  		break;
@@ -583,7 +583,7 @@
  	default:
  		return;
  	}
-@@ -5125,9 +5516,42 @@ static int rt2800_init_registers(struct
+@@ -5101,9 +5492,42 @@ static int rt2800_init_registers(struct
  	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
  		   rt2x00_rt(rt2x00dev, RT5392) ||
  		   rt2x00_rt(rt2x00dev, RT5592)) {
@@ -629,7 +629,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT5350)) {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  	} else {
-@@ -6159,6 +6583,225 @@ static void rt2800_init_bbp_5592(struct
+@@ -6135,6 +6559,225 @@ static void rt2800_init_bbp_5592(struct
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  
@@ -855,7 +855,7 @@
  static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
  {
  	unsigned int i;
-@@ -6201,7 +6844,10 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6177,7 +6820,10 @@ static void rt2800_init_bbp(struct rt2x0
  		return;
  	case RT5390:
  	case RT5392:
@@ -867,7 +867,7 @@
  		break;
  	case RT5592:
  		rt2800_init_bbp_5592(rt2x00dev);
-@@ -7415,6 +8061,295 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -7391,6 +8037,296 @@ static void rt2800_init_rfcsr_5592(struc
  	rt2800_led_open_drain_enable(rt2x00dev);
  }
  
@@ -875,6 +875,8 @@
 +{
 +	u16 freq;
 +	u8 rfvalue;
++	struct hw_mode_spec *spec = &rt2x00dev->spec;
++
 +	/* Initialize RF central register to default value */
 +	rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
 +	rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
@@ -921,7 +923,6 @@
 +	rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
 +	rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
 +
-+	struct hw_mode_spec *spec = &rt2x00dev->spec;
 +	rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
 +	if (spec->clk_is_20mhz)
 +		rt2800_rfcsr_write(rt2x00dev, 13, 0x03);
@@ -1163,7 +1164,7 @@
  static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
  {
  	if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -7450,7 +8385,10 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7426,7 +8362,10 @@ static void rt2800_init_rfcsr(struct rt2
  		rt2800_init_rfcsr_5350(rt2x00dev);
  		break;
  	case RT5390:
@@ -1175,7 +1176,7 @@
  		break;
  	case RT5392:
  		rt2800_init_rfcsr_5392(rt2x00dev);
-@@ -7882,6 +8820,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7858,6 +8797,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF5390:
  	case RF5392:
  	case RF5592:
@@ -1183,7 +1184,7 @@
  		break;
  	default:
  		rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -8448,6 +9387,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8422,6 +9362,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:
@@ -1191,7 +1192,7 @@
  		spec->num_channels = 14;
  		if (spec->clk_is_20mhz)
  			spec->channels = rf_vals_xtal20mhz_3x;
-@@ -8588,6 +9528,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8562,6 +9503,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:
diff --git a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
deleted file mode 100644
index 4c04d4f..0000000
--- a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -387,9 +387,14 @@ static int ath10k_download_and_run_otp(s
- 
- 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
- 
--	if (!skip_otp && result != 0) {
--		ath10k_err(ar, "otp calibration failed: %d", result);
--		return -EINVAL;
-+	if (!skip_otp) {
-+		if (result == 2) {
-+			ath10k_warn(ar, "otp stream is empty, using board.bin contents");
-+			return 0;
-+		} else if (result != 0) {
-+			ath10k_err(ar, "otp calibration failed: %d", result);
-+			return -EINVAL;
-+		}
- 	}
- 
- 	return 0;
diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
index eed3814..93196e1 100644
--- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1323,6 +1323,16 @@ int ath10k_core_register(struct ath10k *
+@@ -1520,6 +1520,16 @@ int ath10k_core_register(struct ath10k *
  	ar->chip_id = chip_id;
  	queue_work(ar->workqueue, &ar->register_work);
  
diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
index 8003f86..34910a0 100644
--- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
+++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -5416,6 +5416,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
+@@ -6804,6 +6804,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
  	return arvif_iter.arvif;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -5590,6 +5605,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -7025,6 +7040,12 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->wiphy->cipher_suites = cipher_suites;
  	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
  
diff --git a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
new file mode 100644
index 0000000..75d8212
--- /dev/null
+++ b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/wireless/mwl8k.c
++++ b/drivers/net/wireless/mwl8k.c
+@@ -6261,6 +6261,8 @@ static int mwl8k_probe(struct pci_dev *p
+ 
+ 	priv->running_bsses = 0;
+ 
++	wait_for_completion(&priv->firmware_loading_complete);
++
+ 	return rc;
+ 
+ err_stop_firmware:
+@@ -6294,8 +6296,6 @@ static void mwl8k_remove(struct pci_dev
+ 		return;
+ 	priv = hw->priv;
+ 
+-	wait_for_completion(&priv->firmware_loading_complete);
+-
+ 	if (priv->fw_state == FW_STATE_ERROR) {
+ 		mwl8k_hw_reset(priv);
+ 		goto unmap;
diff --git a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch b/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch
deleted file mode 100644
index e94574d..0000000
--- a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/init.c
-+++ b/init.c
-@@ -16,6 +16,9 @@
- #include "eeprom.h"
- #include "mcu.h"
- 
-+#define ieee80211_hw_set(hw, flag) \
-+	do { (hw)->flags |= IEEE80211_HW_##flag; } while(0)
-+
- static bool
- mt76_wait_for_mac(struct mt76_dev *dev)
- {