| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169 |
- From: Matthias Schiffer <mschiffer@universe-factory.net>
- Date: Thu, 9 Jun 2016 04:55:37 +0200
- Subject: ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510
- Split profile into 2GHz and 5GHz. The 5GHz devices are
- quite "special". The 2 GHz works perfect.
- Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
- Backport of LEDE c5ff273d85f69981e5b126eeaed3dee5b4061fb4
- diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
- index b41f275..0f7a415 100644
- --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
- +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
- @@ -15,6 +15,7 @@ nanostation-m)
- nanostation-m-xw)
- ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
- ;;
- +cpe210|\
- cpe510)
- ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
- ;;
- diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
- index 3d240fb..f1266d8 100644
- --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
- +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
- @@ -78,6 +78,7 @@ carambola2)
- ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
- ;;
-
- +cpe210|\
- cpe510)
- ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
- index ca9c577..6c3ecf5 100755
- --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
- +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
- @@ -72,6 +72,7 @@ bsb)
- ucidef_set_interface_wlan
- ;;
-
- +cpe210|\
- cpe510)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
- index 20250e9..0d8ccd2 100755
- --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
- +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
- @@ -447,7 +447,11 @@ ar71xx_board_detect() {
- *CAP4200AG)
- name="cap4200ag"
- ;;
- - *"CPE210/220/510/520")
- + *"CPE210/220")
- + name="cpe210"
- + tplink_pharos_board_detect
- + ;;
- + *"CPE510/520")
- name="cpe510"
- tplink_pharos_board_detect
- ;;
- diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
- index 53284df..4003b21 100755
- --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
- +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
- @@ -265,6 +265,7 @@ platform_check_image() {
- return 0
- ;;
-
- + cpe210|\
- cpe510)
- tplink_pharos_check_image "$1" && return 0
- return 1
- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
- index 5cb052a..74daf43 100644
- --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
- +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
- @@ -78,12 +78,8 @@ static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
- }
- };
-
- -
- -static void __init cpe510_setup(void)
- +static void __init cpe_setup(u8 *mac)
- {
- - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- -
- /* Disable JTAG, enabling GPIOs 0-3 */
- /* Configure OBS4 line, for GPIO 4*/
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- @@ -105,9 +101,31 @@ static void __init cpe510_setup(void)
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
- +}
- +
- +
- +static void __init cpe210_setup(void)
- +{
- + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- +
- + cpe_setup(mac);
-
- ath79_register_wmac(ee, mac);
- }
-
- -MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
- +static void __init cpe510_setup(void)
- +{
- + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- +
- + cpe_setup(mac);
- +
- + ath79_register_wmac(ee, mac);
- +}
- +
- +MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
- + cpe210_setup);
- +
- +MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
- cpe510_setup);
- diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
- index d66bd25..75083f9 100644
- --- a/target/linux/ar71xx/image/Makefile
- +++ b/target/linux/ar71xx/image/Makefile
- @@ -2111,7 +2111,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR10
- $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V3,tl-wr1043nd-v3,TL-WR1043ND-v2,ttyS0,115200,0x10430003,1,8M))
- $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
-
- -$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
- +$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE210_220,cpe210-220,CPE210,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
- +$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510_520,cpe510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
-
- $(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
- $(eval $(call SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-UOP,ttyS0,115200,BZ,BZ,ar7240))
- @@ -2175,6 +2176,7 @@ $(eval $(call MultiProfile,TLWR842,TLWR842V1))
- $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4))
- $(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2 TLWR1043V3))
- $(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
- +$(eval $(call MultiProfile,CPE510,CPE210_220 CPE510_520))
- $(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
- $(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTROCKETMXW UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
- $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
- diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
- index d4b417b..c83ac2e 100644
- --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
- +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
- @@ -1,6 +1,6 @@
- --- a/arch/mips/ath79/machtypes.h
- +++ b/arch/mips/ath79/machtypes.h
- -@@ -16,22 +16,203 @@
- +@@ -16,22 +16,204 @@
-
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- @@ -26,6 +26,7 @@
- + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
- + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
- + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
- ++ ATH79_MACH_CPE210, /* TP-LINK CPE210 */
- + ATH79_MACH_CPE510, /* TP-LINK CPE510 */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
|
