123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496 |
- Site configuration
- ==================
- The ``site`` consists of the files ``site.conf`` and ``site.mk``.
- In the first community based values are defined, which both are processed
- during the build process and runtime.
- The last is directly included in the make process of Gluon.
- Configuration
- -------------
- The ``site.conf`` is a lua dictionary with the following defined keys.
- hostname_prefix
- A string which shall prefix the default hostname of a device.
- site_name
- The name of your community.
- site_code
- The code of your community. It is good practice to use the TLD of
- your community here.
- prefix4 \: optional
- The IPv4 Subnet of your community mesh network in CIDR notation, e.g.
- ::
- prefix4 = '10.111.111.0/18'
- Required if ``next_node.ip4`` is set.
- prefix6
- The IPv6 subnet of your community mesh network, e.g.
- ::
- prefix6 = 'fdca::ffee:babe:1::/64'
- timezone
- The timezone of your community live in, e.g.
- ::
- -- Europe/Berlin
- timezone = 'CET-1CEST,M3.5.0,M10.5.0/3'
- ntp_server
- List of NTP servers available in your community or used by your community, e.g.:
- ::
- ntp_servers = {'1.ntp.services.ffac','2.ntp.services.ffac'}
- This NTP servers must be reachable via IPv6 from the nodes. If you don't want to set an IPv6 address
- explicitly, but use a hostname (which is recommended), see also the :ref:`FAQ <faq-dns>`.
- opkg \: optional
- ``opkg`` package manager configuration.
- There are two optional fields in the ``opkg`` section:
- - ``openwrt`` overrides the default OpenWrt repository URL
- - ``extra`` specifies a table of additional repositories (with arbitrary keys)
- ::
- opkg = {
- openwrt = 'http://opkg.services.ffac/openwrt/%n/%v/%S/packages',
- extra = {
- modules = 'http://opkg.services.ffac/modules/gluon-%GS-%GR/%S',
- },
- }
- There are various patterns which can be used in the URLs:
- - ``%n`` is replaced by the OpenWrt version codename (e.g. "chaos_calmer")
- - ``%v`` is replaced by the OpenWrt version number (e.g. "15.05")
- - ``%S`` is replaced by the target architecture (e.g. "ar71xx/generic")
- - ``%GS`` is replaced by the Gluon site code (as specified in ``site.conf``)
- - ``%GV`` is replaced by the Gluon version
- - ``%GR`` is replaced by the Gluon release (as specified in ``site.mk``)
- regdom \: optional
- The wireless regulatory domain responsible for your area, e.g.:
- ::
- regdom = 'DE'
- Setting ``regdom`` is mandatory if ``wifi24`` or ``wifi5`` is defined.
- wifi24 \: optional
- WLAN configuration for 2.4 GHz devices.
- ``channel`` must be set to a valid wireless channel for your radio.
- There are currently three interface types available. You many choose to
- configure any subset of them:
- - ``ap`` creates a master interface where clients may connect
- - ``mesh`` creates an 802.11s mesh interface with forwarding disabled
- - ``ibss`` creates an ad-hoc interface
- Each interface may be disabled by setting ``disabled`` to ``true``.
- This will only affect new installations.
- Upgrades will not changed the disabled state.
- Additionally it is possible to configure the ``supported_rates`` and ``basic_rate``
- of each radio. Both are optional, by default hostapd/driver dictate the rates.
- If ``supported_rates`` is set, ``basic_rate`` is required, because ``basic_rate``
- has to be a subset of ``supported_rates``.
- The example below disables 802.11b rates.
- ``ap`` requires a single parameter, a string, named ``ssid`` which sets the
- interface's ESSID.
- ``mesh`` requires a single parameter, a string, named ``id`` which sets the mesh id.
- ``ibss`` requires two parametersr: ``ssid`` (a string) and ``bssid`` (a MAC).
- An optional parameter ``vlan`` (integer) is supported.
- Both ``mesh`` and ``ibss`` accept an optional ``mcast_rate`` (kbit/s) parameter for
- setting the multicast bitrate. Increasing the default value of 1000 to something
- like 12000 is recommended.
- ::
- wifi24 = {
- channel = 11,
- supported_rates = {6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000},
- basic_rate = {6000, 9000, 18000, 36000, 54000},
- ap = {
- ssid = 'alpha-centauri.freifunk.net',
- },
- mesh = {
- id = 'alpha-centauri-mesh',
- mcast_rate = 12000,
- },
- ibss = {
- ssid = 'ff:ff:ff:ee:ba:be',
- bssid = 'ff:ff:ff:ee:ba:be',
- mcast_rate = 12000,
- },
- },
- wifi5 \: optional
- Same as `wifi24` but for the 5Ghz radio.
- next_node \: package
- Configuration of the local node feature of Gluon
- ::
- next_node = {
- ip4 = '10.23.42.1',
- ip6 = 'fdca:ffee:babe:1::1',
- mac = 'ca:ff:ee:ba:be:00'
- }
- The IPv4 next-node address is optional.
- mesh \: optional
- Options specific to routing protocols.
- At the moment, only the ``batman_adv`` routing protocol has such options:
- The optional value ``gw_sel_class`` sets the gateway selection class. The default
- class 20 is based on the link quality (TQ) only, class 1 is calculated from
- both the TQ and the announced bandwidth.
- ::
- mesh = {
- batman_adv = {
- gw_sel_class = 1,
- },
- }
- fastd_mesh_vpn
- Remote server setup for the fastd-based mesh VPN.
- The `enabled` option can be set to true to enable the VPN by default.
- If `configurable` is set to `false` or unset, the method list will be replaced on updates
- with the list from the site configuration. Setting `configurable` to `true` will allow the user to
- add the method ``null`` to the beginning of the method list or remove ``null`` from it,
- and make this change survive updates. Setting `configurable` is necessary for the
- package `gluon-luci-mesh-vpn-fastd`, which adds a UI for this configuration.
- In any case, the ``null`` method should always be the first method in the list
- if it is supported at all. You should only set `configurable` to `true` if the
- configured peers support both the ``null`` method and methods with encryption.
- You can set syslog_level from verbose (default) to warn to reduce syslog output.
- ::
- fastd_mesh_vpn = {
- methods = {'salsa2012+umac'},
- -- enabled = true,
- -- configurable = true,
- -- syslog_level = 'warn',
- mtu = 1280,
- groups = {
- backbone = {
- -- Limit number of connected peers from this group
- limit = 1,
- peers = {
- peer1 = {
- key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX',
- -- Having multiple domains prevents SPOF in freifunk.net
- remotes = {
- 'ipv4 "vpn1.alpha-centauri.freifunk.net" port 10000',
- 'ipv4 "vpn1.alpha-centauri-freifunk.de" port 10000',
- },
- },
- peer2 = {
- key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX',
- -- You can also omit the ipv4 to allow both connection via ipv4 and ipv6
- remotes = {'"vpn2.alpha-centauri.freifunk.net" port 10000'},
- },
- },
- -- Optional: nested peer groups
- -- groups = {
- -- lowend_backbone = {
- -- limit = 1,
- -- peers = ...
- -- },
- -- },
- },
- -- Optional: additional peer groups, possibly with other limits
- -- peertopeer = {
- -- limit = 10,
- -- peers = { ... },
- -- },
- },
- bandwidth_limit = {
- -- The bandwidth limit can be enabled by default here.
- enabled = false,
- -- Default upload limit (kbit/s).
- egress = 200,
- -- Default download limit (kbit/s).
- ingress = 3000,
- },
- }
- mesh_on_wan \: optional
- Enables the mesh on the WAN port (``true`` or ``false``).
- mesh_on_lan \: optional
- Enables the mesh on the LAN port (``true`` or ``false``).
- poe_passthrough \: optional
- Enable PoE passthrough by default on hardware with such a feature.
- autoupdater \: package
- Configuration for the autoupdater feature of Gluon.
- The mirrors are checked in random order until the manifest could be downloaded
- successfully or all mirrors have been tried.
- ::
- autoupdater = {
- branch = 'stable',
- branches = {
- stable = {
- name = 'stable',
- mirrors = {
- 'http://[fdca:ffee:babe:1::fec1]/firmware/stable/sysupgrade/',
- 'http://autoupdate.alpha-centauri.freifunk.net/firmware/stable/sysupgrade/',
- },
- -- Number of good signatures required
- good_signatures = 2,
- pubkeys = {
- 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someguy
- 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someother
- }
- }
- }
- }
- All configured mirrors must be reachable from the nodes via IPv6. If you don't want to set an IPv6 address
- explicitly, but use a hostname (which is recommended), see also the :ref:`FAQ <faq-dns>`.
- roles \: optional
- Optional role definitions. Nodes will announce their role inside the mesh.
- This will allow in the backend to distinguish between normal, backbone and
- service nodes or even gateways (if they advertise that role). It is up to
- the community which roles to define. See the section below as an example.
- ``default`` takes the default role which is set initially. This value should be
- part of ``list``. If you want node owners to change the role via config mode add
- the package ``gluon-luci-node-role`` to ``site.mk``.
- The strings to display in the LuCI interface are configured per language in the
- ``i18n/en.po``, ``i18n/de.po``, etc. files of the site repository using message IDs like
- ``gluon-luci-node-role:role:node`` and ``gluon-luci-node-role:role:backbone``.
- ::
- roles = {
- default = 'node',
- list = {
- 'node',
- 'test',
- 'backbone',
- 'service',
- },
- },
- setup_mode \: package
- Allows skipping setup mode (config mode) at first boot when attribute
- ``skip`` is set to ``true``. This is optional and may be left out.
- ::
- setup_mode = {
- skip = true,
- },
- legacy \: package
- Configuration for the legacy upgrade path.
- This is only required in communities upgrading from Lübeck's LFF-0.3.x.
- ::
- legacy = {
- version_files = {'/etc/.freifunk_version_keep', '/etc/.eff_version_keep'},
- old_files = {'/etc/config/config_mode', '/etc/config/ffac', '/etc/config/freifunk'},
- config_mode_configs = {'config_mode', 'ffac', 'freifunk'},
- fastd_configs = {'ffac_mesh_vpn', 'mesh_vpn'},
- mesh_ifname = 'freifunk',
- tc_configs = {'ffki', 'freifunk'},
- wifi_names = {'wifi_freifunk', 'wifi_freifunk5', 'wifi_mesh', 'wifi_mesh5'},
- }
- Packages
- --------
- The ``site.mk`` is a Makefile which should define constants
- involved in the build process of Gluon.
- GLUON_SITE_PACKAGES
- Defines a list of packages which should be installed additionally
- to the ``gluon-core`` package.
- GLUON_RELEASE
- The current release version Gluon should use.
- GLUON_PRIORITY
- The default priority for the generated manifests (see the autoupdater documentation
- for more information).
- GLUON_REGION
- Region code to build into images where necessary. Valid values are the empty string,
- ``us`` and ``eu``.
- GLUON_LANGS
- List of languages (as two-letter-codes) to be included in the web interface. Should always contain
- ``en``.
- .. _site-config-mode-texts:
- Config mode texts
- -----------------
- The community-defined texts in the config mode are configured in PO files in the ``i18n`` subdirectory
- of the site configuration. The message IDs currently defined are:
- gluon-config-mode:welcome
- Welcome text on the top of the config wizard page.
- gluon-config-mode:pubkey
- Information about the public VPN key on the reboot page.
- gluon-config-mode:altitude-label
- Label for the ``altitude`` field
- gluon-config-mode:altitude-help
- Description for the usage of the ``altitude`` field
- gluon-config-mode:reboot
- General information shown on the reboot page.
- There is a POT file in the site example directory which can be used to create templates
- for the language files. The command ``msginit -l en -i ../../docs/site-example/i18n/gluon-site.pot``
- can be used from the ``i18n`` directory to create an initial PO file called ``en.po`` if the ``gettext``
- utilities are installed.
- .. note::
- An empty ``msgstr``, as is the default after running ``msginit``, leads to
- the ``msgid`` being printed as-is. It does *not* hide the whole text, as
- might be expected.
- Depending on the context, you might be able to use comments like
- ``<!-- empty -->`` as translations to effectively hide the text.
- Site modules
- ------------
- The file ``modules`` in the site repository is completely optional and can be used
- to supply additional package feeds from which packages are built. The git repositories
- specified here are retrieved in addition to the default feeds when ``make update``
- it called.
- This file's format is very similar to the toplevel ``modules`` file of the Gluon
- tree, with the important different that the list of feeds must be assigned to
- the variable ``GLUON_SITE_FEEDS``. Multiple feed names must be separated by spaces,
- for example::
- GLUON_SITE_FEEDS='foo bar'
- The feed names may only contain alphanumerical characters, underscores and slashes.
- For each of the feeds, the following variables are used to specify how to update
- the feed:
- PACKAGES_${feed}_REPO
- The URL of the git repository to clone (usually ``git://`` or ``http(s)://``)
- PACKAGES_${feed}_COMMIT
- The commit ID of the repository to use
- PACKAGES_${feed}_BRANCH
- Optional: The branch of the repository the given commit ID can be found in.
- Defaults to the default branch of the repository (usually ``master``)
- These variables are always all uppercase, so for an entry ``foo`` in GLUON_SITE_FEEDS,
- the corresponding configuration variables would be ``PACKAGES_FOO_REPO``,
- ``PACKAGES_FOO_COMMIT`` and ``PACKAGES_FOO_BRANCH``. Slashes in feed names are
- replaced by underscores to get valid shell variable identifiers.
- Examples
- --------
- site.mk
- ^^^^^^^
- .. literalinclude:: ../site-example/site.mk
- :language: makefile
- site.conf
- ^^^^^^^^^
- .. literalinclude:: ../site-example/site.conf
- :language: lua
- i18n/en.po
- ^^^^^^^^^^
- .. literalinclude:: ../site-example/i18n/en.po
- :language: po
- i18n/de.po
- ^^^^^^^^^^
- .. literalinclude:: ../site-example/i18n/de.po
- :language: po
- modules
- ^^^^^^^
- .. literalinclude:: ../site-example/modules
- :language: makefile
- site-repos in the wild
- ^^^^^^^^^^^^^^^^^^^^^^
- This is a non-exhaustive list of site-repos from various communities:
- * `site-ffa <https://github.com/tecff/site-ffa>`_ (Altdorf, Landshut & Umgebung)
- * `site-ffac <https://github.com/ffac/site>`_ (Regio Aachen)
- * `site-ffbs <https://github.com/ffbs/site-ffbs>`_ (Braunschweig)
- * `site-ffhb <https://github.com/FreifunkBremen/gluon-site-ffhb>`_ (Bremen)
- * `site-ffda <https://github.com/freifunk-darmstadt/site-ffda>`_ (Darmstadt)
- * `site-ffeh <https://github.com/freifunk-ehingen/site-ffeh>`_ (Ehingen)
- * `site-fffl <https://github.com/freifunk-flensburg/site-fffl>`_ (Flensburg)
- * `site-ffgoe <https://github.com/freifunk-goettingen/site-ffgoe>`_ (Göttingen)
- * `site-ffgt-rhw <https://github.com/ffgtso/site-ffgt-rhw>`_ (Guetersloh)
- * `site-ffhh <https://github.com/freifunkhamburg/site-ffhh>`_ (Hamburg)
- * `site-ffho <https://git.c3pb.de/freifunk-pb/site-ffho>`_ (Hochstift)
- * `site-ffhgw <https://github.com/lorenzo-greifswald/site-ffhgw>`_ (Greifswald)
- * `site-ffka <https://github.com/ffka/site-ffka>`_ (Karlsruhe)
- * `site-ffki <http://git.freifunk.in-kiel.de/ffki-site/>`_ (Kiel)
- * `site-fflz <https://github.com/freifunk-lausitz/site-fflz>`_ (Lausitz)
- * `site-ffl <https://github.com/freifunk-leipzig/freifunk-gluon-leipzig>`_ (Leipzig)
- * `site-ffhl <https://github.com/freifunk-luebeck/site-ffhl>`_ (Lübeck)
- * `site-fflg <https://github.com/kartenkarsten/site-fflg>`_ (Lüneburg)
- * `site-ffmd <https://github.com/FreifunkMD/site-ffmd>`_ (Magdeburg)
- * `site-ffmwu <https://github.com/freifunk-mwu/sites-ffmwu>`_ (Mainz, Wiesbaden & Umgebung)
- * `site-ffmyk <https://github.com/FreifunkMYK/site-ffmyk>`_ (Mayen-Koblenz)
- * `site-ffmo <https://github.com/ffruhr/site-ffmo>`_ (Moers)
- * `site-ffmg <https://github.com/ffruhr/site-ffmg>`_ (Mönchengladbach)
- * `site-ffm <https://github.com/freifunkMUC/site-ffm>`_ (München)
- * `site-ffhmue <https://github.com/Freifunk-Muenden/site-conf>`_ (Münden)
- * `site-ffms <https://github.com/FreiFunkMuenster/site-ffms>`_ (Münsterland)
- * `site-neuss <https://github.com/ffne/site-neuss>`_ (Neuss)
- * `site-ffniers <https://github.com/ffruhr/site-ffniers>`_ (Niersufer)
- * `site-ffnw <https://git.nordwest.freifunk.net/ffnw-firmware/siteconf/tree/master>`_ (Nordwest)
- * `site-ffrgb <https://github.com/ffrgb/site-ffrgb>`_ (Regensburg)
- * `site-ffrn <https://github.com/Freifunk-Rhein-Neckar/site-ffrn>`_ (Rhein-Neckar)
- * `site-ffruhr <https://github.com/ffruhr?utf8=✓&query=site>`_ (Ruhrgebiet, Multi-Communities)
- * `site-ffs <https://github.com/freifunk-stuttgart/site-ffs>`_ (Stuttgart)
- * `site-fftr <https://github.com/freifunktrier/site-fftr>`_ (Trier)
|