| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- Gluon 2016.2.3
- ==============
- Added hardware support
- ~~~~~~~~~~~~~~~~~~~~~~
- ar71xx-generic
- ^^^^^^^^^^^^^^
- * TP-Link TL-WR940N v4
- * TP-Link TL-WR1043ND v4
- Removed hardware support
- ~~~~~~~~~~~~~~~~~~~~~~~~
- Support for Meraki devices (MR12/16/62/66) has been removed for now because of
- severe problems (all devices were using the same MAC addresses). Support will return
- when the issues have been fixed.
- Bugfixes
- ~~~~~~~~
- * Automatically restart respondd on failure (`#863 <https://github.com/freifunk-gluon/gluon/issues/863>`_)
- There have been many reports of respondd processes disappearing; the exact cause is unclear,
- but might be related to the batman-adv debugfs interface and/or out-of-memory conditions.
- A new respondd initscript uses procd to automatically restart respondd when it dies.
- * Make autoupdater timeouts more robust (`#987 <https://github.com/freifunk-gluon/gluon/issues/987>`_)
- It was reported that wget processes sometimes hang indefinitely during the autoupdater manifest
- download. The autoupdater has been improved to ensure that wget can always be interrupted after
- a timeout.
- This issue, together with the recent addition of lock files to ensure that only one instance
- of the autoupdater can run at a time, had caused the autoupdater to blocked completely
- by hanging processes in some cases (till a node was rebooted).
- * Fix regulation domain switching in ath10k (`#1001 <https://github.com/freifunk-gluon/gluon/pull/1001>`_)
- Prevents use of too high transmission power in some cases.
- * Ensure that *prefix6* in site.conf is always a /64 prefix (`6b62e2f <https://github.com/freifunk-gluon/gluon/commit/6b62e2fc788cd1f83f6634288a15724dfc42b0fd>`_)
- Other prefix lengths were never supported and don't make sense in many places the prefix is used. Ensure
- that such configurations will not pass validation.
- Known Issues
- ~~~~~~~~~~~~
- * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
- Reducing the TX power in the Advanced Settings is recommended.
- * The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
- This may lead to issues in environments where a fixed MAC address is expected (like VMware when promicious mode is disallowed).
- * Inconsistent respondd API (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
- The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while.
|
