gluon/patches/lede/0051-ar71xx-fix-lan-ports-on-archer-C59-and-C60.patch

From: Henryk Heisig <hyniu@o2.pl>
Date: Thu, 16 Feb 2017 15:22:49 +0100
Subject: ar71xx: fix lan ports on archer C59 and C60

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 8552cde564b3fbed9425f42d5331f95fe5c3aaa8..5c6b47d0249c979934d61078e16759fc22aa41c7 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -64,8 +64,8 @@ archer-c25-v1)
 	;;
 archer-c59-v1|\
 archer-c60-v1)
-	ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
-	ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+	ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
 
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 3abe1114ee31c79abb125b85119876c3d75bb7c0..933ed22815ee076c98a83173aad143c010c9a131 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -206,9 +206,15 @@ ar71xx_setup_interfaces()
 			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 		;;
 	archer-c59-v1|\
+	rb-450g)
+		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+		;;
 	archer-c60-v1)
+		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
 		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+			"0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
 		;;
 	arduino-yun|\
 	dir-505-a1|\
@@ -370,11 +376,6 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
 		;;
-	rb-450g)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-		;;
 	routerstation-pro)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index 28353aa77b05078b895ab48cf6b1ae53abe98ce2..d55f9b9f75b38159ed7209aa5acd73ff31088b51 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -194,19 +194,33 @@ static void __init archer_c59_v1_setup(void)
 					ARRAY_SIZE(archer_c59_v1_gpio_keys),
 					archer_c59_v1_gpio_keys);
 
+	ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+				   QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+
+	ath79_register_mdio(0, 0x0);
 	ath79_register_mdio(1, 0x0);
 
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
 	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+	/* WAN port */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_register_eth(0);
+
+	/* LAN ports */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 	ath79_eth1_data.speed = SPEED_1000;
 	ath79_eth1_data.duplex = DUPLEX_FULL;
-	ath79_eth1_data.phy_mask = BIT(4);
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_switch_data.phy4_mii_en = 1;
 	ath79_register_eth(1);
 
 	ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
 	ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
 
-
 	ath79_register_usb();
 	gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
 			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
index 78186f02cda0a231afda4e53a1d6ff696ecb6b4a..4d83fa737b9650935b4f7f985d58f471c38cd9da 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -116,15 +116,25 @@ static void __init archer_c60_v1_setup(void)
 					ARRAY_SIZE(archer_c60_v1_gpio_keys),
 					archer_c60_v1_gpio_keys);
 
-	ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
-				   QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+	ath79_register_mdio(0, 0x0);
 	ath79_register_mdio(1, 0x0);
 
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
 
+	/* WAN port */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_register_eth(0);
+
+	/* LAN ports */
 	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 	ath79_eth1_data.speed = SPEED_1000;
 	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_switch_data.phy4_mii_en = 1;
 	ath79_register_eth(1);
 
 	ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);