| 12345678910111213141516171819202122232425262728293031323334353637 |
- Config Mode
- ===========
- When in Config Mode a node will neither participate in the mesh nor connect
- to the VPN using the WAN port. Instead, it'll offer a web interface on the
- LAN port to aid configuration of the node.
- Whether a node is in Config Mode can be determined by a characteristic
- blinking sequence of the SYS LED:
- .. image:: node_configmode.gif
- Activating Config Mode
- ----------------------
- Config Mode is automatically entered at the first boot. You can re-enter
- Config Mode by pressing and holding the RESET/WPS button for about three
- seconds. The device should reboot (all LEDs will turn of briefly) and
- Config Mode will be available.
- Port Configuration
- ------------------
- In general, Config Mode will be offered on the LAN ports. However, there
- are two practical exceptions:
- * Devices with just one network port will run Config Mode on that port.
- * Devices with PoE on the WAN port will run Config Mode on the WAN port instead.
- Accessing Config Mode
- ---------------------
- Config Mode can be accessed at http://192.168.1.1. The node will offer DHCP
- to clients. Should this fail, you may assign an IP from 192.168.1.0/24 to
- your computer manually.
|
