Private WLAN ============ It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network. Please note that you should not enable ``mesh_on_wan`` simultaneously. The private WLAN can be enabled through the config mode if the package ``gluon-luci-private-wifi`` is installed. You may also enable a private WLAN using the command line:: uci set wireless.wan_radio0=wifi-iface uci set wireless.wan_radio0.device=radio0 uci set wireless.wan_radio0.network=wan uci set wireless.wan_radio0.mode=ap uci set wireless.wan_radio0.encryption=psk2 uci set wireless.wan_radio0.ssid="$SSID" uci set wireless.wan_radio0.key="$KEY" uci set wireless.wan_radio0.disabled=0 uci commit wifi Please replace ``$SSID`` by the name of the WLAN and ``$KEY`` by your passphrase (8-63 characters). If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1. It may also be disabled by running:: uci set wireless.wan_radio0.disabled=1 uci commit wifi