Gluon 2014.4
============

Added (and removed) hardware support
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Buffalo

  - WZR-HP-AG300H / WZR-600DHP
  - WZR-HP-G450H

* D-Link

  - DIR-615 (E1) support had to be dropped

* TP-LINK

  - CPE210/220/510/520 (v1)
  - TL-MR3040 (v2
  - TL-WA750RE (v1)
  - TL-WA801N/ND (v2)
  - TL-WA850RE (v1)
  - TL-WR703N (v1)
  - TL-WR710N (v1)
  - TL-WR1043N/ND (v2)


New features
~~~~~~~~~~~~
OpenWrt Barrier Breaker
-----------------------
Switching to the new OpenWrt release 14.09 ("Barrier Breaker") has yielded
lots of updates for both the kernel and most packages. Besides better
performance, this has also greatly improved stability (far less out-of-memory
issues!).

Modular config mode
-------------------
The old ``gluon-config-mode`` package has been split into five
small packages, each providing a single section of the config
mode form. This simplifies removing or replacing parts of the wizard.

See the *Site changes* section for details.

Experimental support for batman-adv compat 15
---------------------------------------------
As batman-adv has broken compatiblity starting with batman-adv 2014.0
(bumping the "compat level" to 15), Gluon users must decide which
batman-adv version to use. The package for the old batman-adv version
``gluon-mesh-batman-adv`` has been renamed to ``gluon-mesh-batman-adv-14``,
the new version can be used with ``gluon-mesh-batman-adv-15``.

Please note that batman-adv compat 15 still isn't tested very well
(and there are known bugs in the current release 2014.3), so for now
we still recommend using compat 14 in "production" environments.

fastd v16
---------
Besides other new features and bugfixes, fastd v16 support the new
authentication method "UMAC". We recommend switching from the old
``salsa2012+gmac`` and ``null+salsa2012+gmac`` methods to the new
``salsa2012+umac`` and ``null+salsa2012+umac`` as UMAC is
much faster and even more secure than GMAC.

Private WLAN
------------
The new package ``gluon-luci-private-wifi`` allows to configure a private WLAN
with WPA-PSK in the expert mode which is bridged with the WAN uplink.

Embedding SSH keys
------------------

Using ``gluon-authorized-keys`` it is possible to embed predefined SSH
public keys to firmware images. If ``gluon-config-mode-*`` is left out
images will be ready to mesh after the first boot with SSH running for
further configuration.

Bugfixes
~~~~~~~~

* Expert Mode: Fixed all SSH keys being removed when a password was set
* ``gluon-mesh-vpn-fastd``: Fixed VPN peers removed from the ``site.conf`` not being removed from ``/etc/config/fastd``
* TL-LINK TL-WDR3600/4300: Added workaround for reboot issues
* Improved stability (due to switch to OpenWrt Barrier Breaker)

Site changes
~~~~~~~~~~~~
* ``site.mk``

  - Obsolete packages:

    + ``gluon-config-mode``
    + ``gluon-mesh-batman-adv``

  - Recommended new packages:

    + ``gluon-config-mode-autoupdater``
    + ``gluon-config-mode-hostname``
    + ``gluon-config-mode-mesh-vpn``
    + ``gluon-config-mode-geo-location``
    + ``gluon-config-mode-contact-info``
    + ``gluon-mesh-batman-adv-14`` (specify this before all other packages in the ``site.mk``!)

Internals
~~~~~~~~~
The switch to Barrier Breaker has led to a multitude of changes all over Gluon:

* The config mode/setup mode is now started by an own set of init scripts in ``/lib/gluon/setup-mode/rc.d`` run by procd
* Many tools and services used by Gluon have been replaced by our own implementations to reduce the size of the images:

  - ethtool has been replaced by our minimal Lua library *lua-ethtool-stats*
  - tc has been replaced by our minimal implementation *gluon-simple-tc*
  - radvd has been replaced by our minimal implementation *gluon-radvd*

Known Issues
~~~~~~~~~~~~

Alfred crashes
--------------

https://github.com/freifunk-gluon/gluon/issues/177

Alfred may still crash unconditionally. Some measures have been taken
to aid but the core problem hasn't been analyzed yet.Some measures have
been taken to aid but the core problem hasn't been tackled yet.

WDR4300 stuck after reboot
--------------------------

https://github.com/freifunk-gluon/gluon/issues/185

The device may still fail to reboot properly.

Out of memory / batman-adv memory leaks
---------------------------------------

https://github.com/freifunk-gluon/gluon/issues/216

In some (hopefully rare!) cases batman-adv may still leak memory
associated with global TT entries. This may result in kernel panics or
out-of-memory conditions.


Ignored tx-power offset on Ubiquiti AirMax devices
--------------------------------------------------

https://github.com/freifunk-gluon/gluon/issues/94

There is still no OpenWRT support for determining the transmission
power offsets on Ubiquiti AirMax devices (Bullet M2, Picostation
M2, Nanostation (loco) M2, ...). Use Gluon with caution on these
devices! Manual adjustment may be required.