From: Matthias Schiffer Date: Sat, 11 Jan 2014 17:28:18 +0100 Subject: Remove hostapd and mac80211 packages diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in deleted file mode 100644 index 810c5a0..0000000 --- a/package/hostapd/Config.in +++ /dev/null @@ -1,47 +0,0 @@ -# wpa_supplicant config -config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK - bool "Disable timestamp check" - depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini - default n - help - This disables the timestamp check for certificates in wpa_supplicant - Useful for devices without RTC that cannot reliably get the real date/time - -choice - prompt "Choose TLS provider" - default WPA_SUPPLICANT_INTERNAL - depends PACKAGE_wpa-supplicant || PACKAGE_wpad - -config WPA_SUPPLICANT_INTERNAL - bool "internal" - -config WPA_SUPPLICANT_OPENSSL - bool "openssl" - select PACKAGE_libopenssl - -endchoice - -config WPA_RFKILL_SUPPORT - bool "Add rfkill support" - depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini - default n - -config WPA_MSG_MIN_PRIORITY - int "Minimum debug message priority" - default 3 - help - Useful values are: - 0 = all messages - 1 = raw message dumps - 2 = most debugging messages - 3 = info messages - 4 = warnings - 5 = errors - -config DRIVER_WEXT_SUPPORT - bool - default n - -config DRIVER_11N_SUPPORT - bool - default n diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile deleted file mode 100644 index 485a8fa..0000000 --- a/package/hostapd/Makefile +++ /dev/null @@ -1,346 +0,0 @@ -# -# Copyright (C) 2006-2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -PKG_NAME:=hostapd -PKG_VERSION:=20130405 -PKG_RELEASE:=1 -PKG_REV:=f2f66ad7e805218468aa041985dccaf8719c296e - -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git -PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE_VERSION:=$(PKG_REV) -PKG_SOURCE_PROTO:=git -PKG_MIRROR_MD5SUM:=5dff9bc3b8fbd9ef8a66273d5adee5a3 - -PKG_MAINTAINER:=Felix Fietkau - -PKG_BUILD_PARALLEL:=1 - -PKG_BUILD_DEPENDS:= \ - PACKAGE_kmod-madwifi:madwifi \ - -PKG_CONFIG_DEPENDS:= \ - CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \ - CONFIG_PACKAGE_kmod-ath9k \ - CONFIG_PACKAGE_kmod-mac80211 \ - CONFIG_PACKAGE_kmod-madwifi \ - CONFIG_PACKAGE_hostapd \ - CONFIG_PACKAGE_hostapd-mini \ - CONFIG_PACKAGE_kmod-hostap \ - CONFIG_WPA_RFKILL_SUPPORT \ - CONFIG_DRIVER_WEXT_SUPPORT \ - CONFIG_DRIVER_11N_SUPPORT - -LOCAL_TYPE=$(strip \ - $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \ - $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \ - hostapd \ - ))) -LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT))) - -ifeq ($(LOCAL_TYPE),supplicant) - ifeq ($(LOCAL_VARIANT),full) - PKG_CONFIG_DEPENDS += \ - CONFIG_WPA_SUPPLICANT_INTERNAL \ - CONFIG_WPA_SUPPLICANT_OPENSSL - endif -endif - -PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) - -include $(INCLUDE_DIR)/package.mk - -STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY) - -ifneq ($(CONFIG_DRIVER_11N_SUPPORT),) - HOSTAPD_IEEE80211N:=y -endif - -DRIVER_MAKEOPTS= \ - CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \ - CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \ - CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \ - CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \ - CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k) \ - CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \ - $(if $(CONFIG_WPA_RFKILL_SUPPORT),NEED_RFKILL=y) - -ifneq ($(LOCAL_TYPE),hostapd) - ifdef CONFIG_WPA_SUPPLICANT_OPENSSL - ifeq ($(LOCAL_VARIANT),full) - DRIVER_MAKEOPTS += CONFIG_TLS=openssl - TARGET_LDFLAGS += -lcrypto -lssl - endif - endif - ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK - TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK - endif - DRIVER_MAKEOPTS += \ - CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) -endif - -DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny @(!TARGET_avr32||BROKEN) - -define Package/hostapd/Default - SECTION:=net - CATEGORY:=Network - TITLE:=IEEE 802.1x Authenticator - URL:=http://hostap.epitest.fi/ - DEPENDS:=$(DRV_DEPENDS) +libubus -endef - -define Package/hostapd -$(call Package/hostapd/Default) - TITLE+= (full) - VARIANT:=full -endef - -define Package/hostapd/description - This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS - Authenticator. -endef - -define Package/hostapd-mini -$(call Package/hostapd/Default) - TITLE+= (WPA-PSK only) - VARIANT:=mini -endef - -define Package/hostapd-mini/description - This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only). -endef - -define Package/hostapd-utils - $(call Package/hostapd/Default) - TITLE+= (utils) - DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini -endef - -define Package/hostapd-utils/description - This package contains a command line utility to control the - IEEE 802.1x/WPA/EAP/RADIUS Authenticator. -endef - -define Package/wpad/Default - SECTION:=net - CATEGORY:=Network - TITLE:=IEEE 802.1x Authenticator/Supplicant - URL:=http://hostap.epitest.fi/ -endef - -define Package/wpad -$(call Package/wpad/Default) - TITLE+= (full) - DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl +libubus - VARIANT:=wpad-full -endef - -define Package/wpad/description - This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS - Authenticator and Supplicant -endef - -define Package/wpad-mini -$(call Package/wpad/Default) - TITLE+= (WPA-PSK only) - DEPENDS:=$(DRV_DEPENDS) +libubus - VARIANT:=wpad-mini -endef - -define Package/wpad-mini/description - This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only). -endef - -define Package/wpa-supplicant - SECTION:=net - CATEGORY:=Network - TITLE:=WPA Supplicant - URL:=http://hostap.epitest.fi/wpa_supplicant/ - DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl - VARIANT:=supplicant-full -endef - -define Package/wpa-supplicant/Description - WPA Supplicant -endef - -define Package/wpa-supplicant/config - source "$(SOURCE)/Config.in" -endef - -define Package/wpa-supplicant-mini - $(Package/wpa-supplicant) - TITLE:=WPA Supplicant (minimal version) - DEPENDS:=$(DRV_DEPENDS) - VARIANT:=supplicant-mini -endef - -define Package/wpa-supplicant-mini/Description - WPA Supplicant (minimal version) -endef - -define Package/wpa-cli - SECTION:=net - CATEGORY:=Network - DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpad-mini||PACKAGE_wpad - TITLE:=WPA Supplicant command line interface -endef - -define Package/wpa-cli/Description - WPA Supplicant control utility -endef - - -ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED))) - define Build/Configure/rebuild - $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f - rm -f $(PKG_BUILD_DIR)/hostapd/hostapd - rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant - rm -f $(PKG_BUILD_DIR)/.config_* - touch $(subst .configured_,.config_,$(STAMP_CONFIGURED)) - endef -endif - -define Build/Configure - $(Build/Configure/rebuild) - $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config - $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config -endef - -TARGET_CPPFLAGS := \ - -I$(STAGING_DIR)/usr/include/libnl-tiny \ - -I$(PKG_BUILD_DIR)/src/crypto \ - $(TARGET_CPPFLAGS) \ - -I$(CURDIR)/madwifi \ - -DCONFIG_LIBNL20 \ - -D_GNU_SOURCE \ - $(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY)) - -TARGET_CFLAGS += -ffunction-sections -fdata-sections -TARGET_LDFLAGS += -Wl,--gc-sections -ifeq ($(findstring supplicant,$(BUILD_VARIANT)),) - TARGET_LDFLAGS += -lubox -lubus -endif - -ifdef CONFIG_PACKAGE_kmod-mac80211 - TARGET_LDFLAGS += -lm -lnl-tiny -endif - -define Build/RunMake - CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \ - $(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \ - $(TARGET_CONFIGURE_OPTS) \ - $(DRIVER_MAKEOPTS) \ - LIBS="$(TARGET_LDFLAGS)" \ - BCHECK= \ - $(2) -endef - -define Build/Compile/wpad - echo ` \ - $(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \ - $(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \ - sed -e 's,-n ,,g' -e 's,$(TARGET_CFLAGS),,' \ - ` > $(PKG_BUILD_DIR)/.cflags - +$(call Build/RunMake,hostapd, \ - CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ - MULTICALL=1 \ - hostapd_cli hostapd_multi.a \ - ) - +$(call Build/RunMake,wpa_supplicant, \ - CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ - MULTICALL=1 \ - wpa_cli wpa_supplicant_multi.a \ - ) - $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \ - $(TARGET_CFLAGS) \ - ./files/multicall.c \ - $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \ - $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \ - $(TARGET_LDFLAGS) -endef - -define Build/Compile/hostapd - $(call Build/RunMake,hostapd, \ - hostapd hostapd_cli \ - ) -endef - -define Build/Compile/supplicant - $(call Build/RunMake,wpa_supplicant, \ - wpa_cli wpa_supplicant \ - ) -endef - -define Build/Compile - $(Build/Compile/$(LOCAL_TYPE)) -endef - -define Install/hostapd - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh - $(INSTALL_DIR) $(1)/usr/sbin -endef - -define Install/supplicant - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh - $(INSTALL_DIR) $(1)/usr/sbin -endef - -define Package/hostapd/install - $(call Install/hostapd,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ -endef -Package/hostapd-mini/install = $(Package/hostapd/install) - -ifneq ($(LOCAL_TYPE),supplicant) - define Package/hostapd-utils/install - $(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/hotplug.d/button - $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/ - $(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps - $(if $(CONFIG_PROCD_INIT), - $(INSTALL_DIR) $(1)/etc/rc.button/ - $(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps, - $(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps - ) - endef -endif - -define Package/wpad/install - $(call Install/hostapd,$(1)) - $(call Install/supplicant,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/ - ln -sf wpad $(1)/usr/sbin/hostapd - ln -sf wpad $(1)/usr/sbin/wpa_supplicant -endef -Package/wpad-mini/install = $(Package/wpad/install) - -define Package/wpa-supplicant/install - $(call Install/supplicant,$(1)) - $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/ -endef -Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install) - -ifneq ($(LOCAL_TYPE),hostapd) - define Package/wpa-cli/install - $(INSTALL_DIR) $(1)/usr/sbin - $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/ - endef -endif - -$(eval $(call BuildPackage,hostapd)) -$(eval $(call BuildPackage,hostapd-mini)) -$(eval $(call BuildPackage,wpad)) -$(eval $(call BuildPackage,wpad-mini)) -$(eval $(call BuildPackage,wpa-supplicant)) -$(eval $(call BuildPackage,wpa-supplicant-mini)) -$(eval $(call BuildPackage,wpa-cli)) -$(eval $(call BuildPackage,hostapd-utils)) diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config deleted file mode 100644 index d558736..0000000 --- a/package/hostapd/files/hostapd-full.config +++ /dev/null @@ -1,164 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -#CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -#CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal -CONFIG_INTERNAL_LIBTOMMATH=y -CONFIG_INTERNAL_AES=y -NEED_AES_DEC=y - -CONFIG_NO_DUMP_STATE=y - -CONFIG_WPS=y -CONFIG_FULL_DYNAMIC_VLAN=y - diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config deleted file mode 100644 index 3e94a64..0000000 --- a/package/hostapd/files/hostapd-mini.config +++ /dev/null @@ -1,157 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -# CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -#CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -#CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -#CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -#CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -#CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -#CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -#CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -#CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -#CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal - -CONFIG_NO_DUMP_STATE=y diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh deleted file mode 100644 index 00c6a09..0000000 --- a/package/hostapd/files/hostapd.sh +++ /dev/null @@ -1,301 +0,0 @@ -hostapd_set_bss_options() { - local var="$1" - local vif="$2" - local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible - - config_get enc "$vif" encryption - config_get wep_rekey "$vif" wep_rekey # 300 - config_get wpa_group_rekey "$vif" wpa_group_rekey # 300 - config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300 - config_get wpa_master_rekey "$vif" wpa_master_rekey # 640 - config_get_bool ap_isolate "$vif" isolate 0 - config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1 - config_get max_num_sta "$vif" max_num_sta 0 - config_get max_inactivity "$vif" max_inactivity 0 - config_get_bool preamble "$vif" short_preamble 1 - - config_get device "$vif" device - config_get hwmode "$device" hwmode - config_get phy "$device" phy - - append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" - - if [ "$ap_isolate" -gt 0 ]; then - append "$var" "ap_isolate=$ap_isolate" "$N" - fi - if [ "$max_num_sta" -gt 0 ]; then - append "$var" "max_num_sta=$max_num_sta" "$N" - fi - if [ "$max_inactivity" -gt 0 ]; then - append "$var" "ap_max_inactivity=$max_inactivity" "$N" - fi - append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N" - if [ "$preamble" -gt 0 ]; then - append "$var" "preamble=$preamble" "$N" - fi - - # Examples: - # psk-mixed/tkip => WPA1+2 PSK, TKIP - # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP - # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP - # ... - - # TODO: move this parsing function somewhere generic, so that - # later it can be reused by drivers that don't use hostapd - - # crypto defaults: WPA2 vs WPA1 - case "$enc" in - wpa2*|*psk2*) - wpa=2 - crypto="CCMP" - ;; - *mixed*) - wpa=3 - crypto="CCMP TKIP" - ;; - *) - wpa=1 - crypto="TKIP" - ;; - esac - - # explicit override for crypto setting - case "$enc" in - *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";; - *aes|*ccmp) crypto="CCMP";; - *tkip) crypto="TKIP";; - esac - - # enforce CCMP for 11ng and 11na - case "$hwmode:$crypto" in - *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";; - esac - - # use crypto/auth settings for building the hostapd config - case "$enc" in - *psk*) - config_get psk "$vif" key - if [ ${#psk} -eq 64 ]; then - append "$var" "wpa_psk=$psk" "$N" - else - append "$var" "wpa_passphrase=$psk" "$N" - fi - wps_possible=1 - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - ;; - *wpa*) - # required fields? formats? - # hostapd is particular, maybe a default configuration for failures - config_get auth_server "$vif" auth_server - [ -z "$auth_server" ] && config_get auth_server "$vif" server - append "$var" "auth_server_addr=$auth_server" "$N" - config_get auth_port "$vif" auth_port - [ -z "$auth_port" ] && config_get auth_port "$vif" port - auth_port=${auth_port:-1812} - append "$var" "auth_server_port=$auth_port" "$N" - config_get auth_secret "$vif" auth_secret - [ -z "$auth_secret" ] && config_get auth_secret "$vif" key - append "$var" "auth_server_shared_secret=$auth_secret" "$N" - config_get_bool auth_cache "$vif" auth_cache 0 - [ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N" - [ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N" - config_get acct_server "$vif" acct_server - [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N" - config_get acct_port "$vif" acct_port - [ -n "$acct_port" ] && acct_port=${acct_port:-1813} - [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N" - config_get acct_secret "$vif" acct_secret - [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N" - config_get nasid "$vif" nasid - append "$var" "nas_identifier=$nasid" "$N" - append "$var" "eapol_key_index_workaround=1" "$N" - append "$var" "ieee8021x=1" "$N" - append "$var" "wpa_key_mgmt=WPA-EAP" "$N" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N" - done - append "$var" "wep_default_key=$((key - 1))" "$N" - ;; - *) - append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N" - append "$var" "wep_default_key=0" "$N" - [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N" - ;; - esac - case "$enc" in - *shared*) - auth_algs=2 - ;; - *mixed*) - auth_algs=3 - ;; - esac - wpa=0 - crypto= - ;; - *) - wpa=0 - crypto= - ;; - esac - append "$var" "auth_algs=${auth_algs:-1}" "$N" - append "$var" "wpa=$wpa" "$N" - [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - - config_get ssid "$vif" ssid - config_get bridge "$vif" bridge - config_get ieee80211d "$vif" ieee80211d - config_get iapp_interface "$vif" iapp_interface - - config_get_bool wps_pbc "$vif" wps_pushbutton 0 - config_get_bool wps_label "$vif" wps_label 0 - - config_get config_methods "$vif" wps_config - [ "$wps_pbc" -gt 0 ] && append config_methods push_button - - [ -n "$wps_possible" -a -n "$config_methods" ] && { - config_get device_type "$vif" wps_device_type "6-0050F204-1" - config_get device_name "$vif" wps_device_name "OpenWrt AP" - config_get manufacturer "$vif" wps_manufacturer "openwrt.org" - - append "$var" "eap_server=1" "$N" - append "$var" "wps_state=2" "$N" - append "$var" "ap_setup_locked=1" "$N" - append "$var" "device_type=$device_type" "$N" - append "$var" "device_name=$device_name" "$N" - append "$var" "manufacturer=$manufacturer" "$N" - append "$var" "config_methods=$config_methods" "$N" - } - - append "$var" "ssid=$ssid" "$N" - [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N" - [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N" - [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N" - - if [ "$wpa" -ge "2" ] - then - # RSN -> allow preauthentication - config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache" - if [ -n "$bridge" -a "$rsn_preauth" = 1 ] - then - append "$var" "rsn_preauth=1" "$N" - append "$var" "rsn_preauth_interfaces=$bridge" "$N" - fi - - # RSN -> allow management frame protection - config_get ieee80211w "$vif" ieee80211w - case "$ieee80211w" in - [012]) - append "$var" "ieee80211w=$ieee80211w" "$N" - [ "$ieee80211w" -gt "0" ] && { - config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout - config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout - [ -n "$ieee80211w_max_timeout" ] && \ - append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" - [ -n "$ieee80211w_retry_timeout" ] && \ - append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" - } - ;; - esac - fi - - config_get macfilter "$vif" macfilter - macfile="/var/run/hostapd-$ifname.maclist" - [ -e "$macfile" ] && rm -f "$macfile" - - case "$macfilter" in - allow) - append "$var" "macaddr_acl=1" "$N" - append "$var" "accept_mac_file=$macfile" "$N" - ;; - deny) - append "$var" "macaddr_acl=0" "$N" - append "$var" "deny_mac_file=$macfile" "$N" - ;; - esac - config_get maclist "$vif" maclist - [ -n "$maclist" ] && { - for mac in $maclist; do - echo "$mac" >> $macfile - done - } -} - -hostapd_set_log_options() { - local var="$1" - local cfg="$2" - local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme - - config_get log_level "$cfg" log_level 2 - - config_get_bool log_80211 "$cfg" log_80211 1 - config_get_bool log_8021x "$cfg" log_8021x 1 - config_get_bool log_radius "$cfg" log_radius 1 - config_get_bool log_wpa "$cfg" log_wpa 1 - config_get_bool log_driver "$cfg" log_driver 1 - config_get_bool log_iapp "$cfg" log_iapp 1 - config_get_bool log_mlme "$cfg" log_mlme 1 - - local log_mask=$(( \ - ($log_80211 << 0) | \ - ($log_8021x << 1) | \ - ($log_radius << 2) | \ - ($log_wpa << 3) | \ - ($log_driver << 4) | \ - ($log_iapp << 5) | \ - ($log_mlme << 6) \ - )) - - append "$var" "logger_syslog=$log_mask" "$N" - append "$var" "logger_syslog_level=$log_level" "$N" - append "$var" "logger_stdout=$log_mask" "$N" - append "$var" "logger_stdout_level=$log_level" "$N" -} - -hostapd_setup_vif() { - local vif="$1" - local driver="$2" - local ifname device channel hwmode - - hostapd_cfg= - - config_get ifname "$vif" ifname - config_get device "$vif" device - config_get channel "$device" channel - config_get hwmode "$device" hwmode - - hostapd_set_log_options hostapd_cfg "$device" - hostapd_set_bss_options hostapd_cfg "$vif" - - case "$hwmode" in - *bg|*gdt|*gst|*fh) hwmode=g;; - *adt|*ast) hwmode=a;; - esac - [ "$channel" = auto ] && channel= - [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" - cat > /var/run/hostapd-$ifname.conf < -#include -#include - -extern int hostapd_main(int argc, char **argv); -extern int wpa_supplicant_main(int argc, char **argv); - -int main(int argc, char **argv) -{ - bool restart = false; - const char *prog = argv[0]; - -restart: - if (strstr(argv[0], "hostapd")) - return hostapd_main(argc, argv); - else if (strstr(argv[0], "wpa_supplicant")) - return wpa_supplicant_main(argc, argv); - - if (!restart && argc > 1) { - argv++; - argc--; - restart = true; - goto restart; - } - - fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd []\n", prog); - return 255; -} diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config deleted file mode 100644 index f5abbad..0000000 --- a/package/hostapd/files/wpa_supplicant-full.config +++ /dev/null @@ -1,408 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -NEED_80211_COMMON=y - -CONFIG_IBSS_RSN=y diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config deleted file mode 100644 index 772e1d9..0000000 --- a/package/hostapd/files/wpa_supplicant-mini.config +++ /dev/null @@ -1,406 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -# CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -# CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -# CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -# CONFIG_EAP_TLS=y - -# EAL-PEAP -# CONFIG_EAP_PEAP=y - -# EAP-TTLS -# CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -# CONFIG_EAP_GTC=y - -# EAP-OTP -# CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -# CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -# CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -# CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -# CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -NEED_80211_COMMON=y diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh deleted file mode 100644 index 0b5e1d3..0000000 --- a/package/hostapd/files/wpa_supplicant.sh +++ /dev/null @@ -1,194 +0,0 @@ -wpa_supplicant_setup_vif() { - local vif="$1" - local driver="$2" - local key="$key" - local options="$3" - local freq="" - local ht="$5" - local ap_scan="" - local scan_ssid="1" - [ -n "$4" ] && freq="frequency=$4" - - config_get enc "$vif" encryption - config_get key "$vif" key - - local net_cfg bridge - config_get bridge "$vif" bridge - [ -z "$bridge" ] && { - net_cfg="$(find_net_config "$vif")" - [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")" - config_set "$vif" bridge "$bridge" - } - - local mode ifname wds modestr="" - config_get mode "$vif" mode - config_get ifname "$vif" ifname - config_get_bool wds "$vif" wds 0 - [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || { - echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface" - return 1 - } - [ "$mode" = "adhoc" ] && { - modestr="mode=1" - scan_ssid="0" - ap_scan="ap_scan=2" - } - - key_mgmt='NONE' - case "$enc" in - *none*) ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" - done - wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" - ;; - *) - wep_key0="wep_key0=$(prepare_key_wep "$key")" - wep_tx_keyidx="wep_tx_keyidx=0" - ;; - esac - ;; - *psk*) - key_mgmt='WPA-PSK' - # if you want to use PSK with a non-nl80211 driver you - # have to use WPA-NONE and wext driver for wpa_s - [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && { - key_mgmt='WPA-NONE' - driver='wext' - } - if [ ${#key} -eq 64 ]; then - passphrase="psk=${key}" - else - passphrase="psk=\"${key}\"" - fi - case "$enc" in - *psk2*) - proto='proto=RSN' - config_get ieee80211w "$vif" ieee80211w - ;; - *psk*) - proto='proto=WPA' - ;; - esac - ;; - *wpa*|*8021x*) - proto='proto=WPA2' - key_mgmt='WPA-EAP' - config_get ieee80211w "$vif" ieee80211w - config_get ca_cert "$vif" ca_cert - config_get eap_type "$vif" eap_type - ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} - case "$eap_type" in - tls) - pairwise='pairwise=CCMP' - group='group=CCMP' - config_get identity "$vif" identity - config_get client_cert "$vif" client_cert - config_get priv_key "$vif" priv_key - config_get priv_key_pwd "$vif" priv_key_pwd - identity="identity=\"$identity\"" - client_cert="client_cert=\"$client_cert\"" - priv_key="private_key=\"$priv_key\"" - priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" - ;; - peap|ttls) - config_get auth "$vif" auth - config_get identity "$vif" identity - config_get password "$vif" password - phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" - identity="identity=\"$identity\"" - password="${password:+password=\"$password\"}" - ;; - esac - eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" - ;; - esac - - case "$ieee80211w" in - [012]) - ieee80211w="ieee80211w=$ieee80211w" - ;; - esac - - local fixed_freq bssid1 beacon_interval brates mrate - config_get ifname "$vif" ifname - config_get bridge "$vif" bridge - config_get ssid "$vif" ssid - config_get bssid "$vif" bssid - bssid1=${bssid:+"bssid=$bssid"} - beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"} - - local br brval brsub brstr - [ -n "$basic_rate_list" ] && { - for br in $basic_rate_list; do - brval="$(($br / 1000))" - brsub="$((($br / 100) % 10))" - [ "$brsub" -gt 0 ] && brval="$brval.$brsub" - [ -n "$brstr" ] && brstr="$brstr," - brstr="$brstr$brval" - done - brates=${basic_rate_list:+"rates=$brstr"} - } - - local mcval="" - [ -n "$mcast_rate" ] && { - mcval="$(($mcast_rate / 1000))" - mcsub="$(( ($mcast_rate / 100) % 10 ))" - [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub" - mrate=${mcast_rate:+"mcast_rate=$mcval"} - } - - local ht_str - [ -n "$ht" ] && ht_str="htmode=$ht" - - rm -rf /var/run/wpa_supplicant-$ifname - cat > /var/run/wpa_supplicant-$ifname.conf < -#include -#include -#endif - -#if !defined(__KERNEL__) || !defined (__bitwise) -#define __le16 u_int16_t -#define __le32 u_int32_t -#define __le64 u_int64_t -#define __be16 u_int16_t -#define __be32 u_int32_t -#define __be64 u_int64_t -#define __force -#endif - -#ifndef container_of -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) -#endif - -#ifndef list_for_each_entry_reverse -#define list_for_each_entry_reverse(pos, head, member) \ - for (pos = list_entry((head)->prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ - pos = list_entry(pos->member.prev, typeof(*pos), member)) -#endif - -#ifndef NETDEV_TX_OK -#define NETDEV_TX_OK 0 -#define NETDEV_TX_BUSY 1 -#endif - -/* - * BSD/Linux compatibility shims. These are used mainly to - * minimize differences when importing necesary BSD code. - */ -#define NBBY 8 /* number of bits/byte */ - -/* roundup() appears in Linux 2.6.18 */ -#include -#ifndef roundup -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */ -#endif - -#define howmany(x, y) (((x)+((y)-1))/(y)) - -/* Bit map related macros. */ -#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) -#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) -#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) - -#ifndef __packed -#define __packed __attribute__((__packed__)) -#endif - -#define __offsetof(t,m) offsetof(t,m) - -#ifndef ALIGNED_POINTER -/* - * ALIGNED_POINTER is a boolean macro that checks whether an address - * is valid to fetch data elements of type t from on this architecture. - * This does not reflect the optimal alignment, just the possibility - * (within reasonable limits). - * - */ -#define ALIGNED_POINTER(p,t) 1 -#endif - -#ifdef __KERNEL__ -#define KASSERT(exp, msg) do { \ - if (unlikely(!(exp))) { \ - printk msg; \ - BUG(); \ - } \ -} while (0) -#endif /* __KERNEL__ */ - -/* - * NetBSD/FreeBSD defines for file version. - */ -#define __FBSDID(_s) -#define __KERNEL_RCSID(_n,_s) - -/* - * Fixes for Linux API changes - */ -#ifdef __KERNEL__ - -#include - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) -#define AUTOCONF_INCLUDED 1 -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) -#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t, 1) -#else -#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9) -#define __user -#define __kernel -#define __iomem -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -typedef int gfp_t; -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) -static inline int timeval_compare(struct timeval *lhs, struct timeval *rhs) -{ - if (lhs->tv_sec < rhs->tv_sec) - return -1; - if (lhs->tv_sec > rhs->tv_sec) - return 1; - return lhs->tv_usec - rhs->tv_usec; -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -#define IRQF_SHARED SA_SHIRQ -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) -#define netdev_priv(_netdev) ((_netdev)->priv) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) -#define skb_end_pointer(_skb) ((_skb)->end) -#define skb_tail_pointer(_skb) ((_skb)->tail) -#define skb_set_network_header(_skb, _offset) \ - do { (_skb)->nh.raw = (_skb)->data + (_offset); } while(0) -#define skb_reset_network_header(_skb) \ - do { (_skb)->nh.raw = (_skb)->data; } while(0) -#define skb_mac_header(_skb) ((_skb)->mac.raw) -#define skb_reset_mac_header(_skb) \ - do { (_skb)->mac.raw = (_skb)->data; } while(0) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) -#define CTL_AUTO -2 -#define DEV_ATH 9 -#else -#define CTL_AUTO CTL_UNNUMBERED -#define DEV_ATH CTL_UNNUMBERED -#endif - -/* __skb_append got a third parameter in 2.6.14 */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -#define __skb_queue_after(_list, _old, _new) __skb_append(_old, _new) -#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) -#define __skb_queue_after(_list, _old, _new) __skb_append(_old, _new, _list) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) -#define CTLNAME(x) .ctl_name = x, -#else -#define CTLNAME(x) -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ATH_COMPAT_H_ */ diff --git a/package/hostapd/madwifi/net80211/_ieee80211.h b/package/hostapd/madwifi/net80211/_ieee80211.h deleted file mode 100644 index 2d2a06f..0000000 --- a/package/hostapd/madwifi/net80211/_ieee80211.h +++ /dev/null @@ -1,325 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: _ieee80211.h 3207 2008-01-18 21:25:05Z mtaylor $ - */ -#ifndef _NET80211__IEEE80211_H_ -#define _NET80211__IEEE80211_H_ - -enum ieee80211_phytype { - IEEE80211_T_DS, /* direct sequence spread spectrum */ - IEEE80211_T_FH, /* frequency hopping */ - IEEE80211_T_OFDM, /* frequency division multiplexing */ - IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ -}; -#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ - -/* XXX: not really a mode; there are really multiple PHYs */ -enum ieee80211_phymode { - IEEE80211_MODE_AUTO = 0, /* autoselect */ - IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ - IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ - IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ - IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ - IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock dynamic turbo */ - IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock dynamic turbo*/ -}; -#define IEEE80211_MODE_MAX (IEEE80211_MODE_TURBO_G+1) - -enum ieee80211_opmode { - IEEE80211_M_STA = 1, /* infrastructure station */ - IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ - IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ - IEEE80211_M_HOSTAP = 6, /* Software Access Point */ - IEEE80211_M_MONITOR = 8, /* Monitor mode */ - IEEE80211_M_WDS = 2 /* WDS link */ -}; - -/* - * True if this mode will send beacon on a regular interval, like AP - * or IBSS - */ -#define IEEE80211_IS_MODE_BEACON(_opmode) \ - ((_opmode == IEEE80211_M_IBSS) || \ - (_opmode == IEEE80211_M_HOSTAP)) - -/* - * True if this mode must behave like a DFS master, ie do Channel - * Check Availability and In Service Monitoring. We need to make sure - * that all modes cannot send data without being authorized. Such - * enforcement is not done in monitor mode however. - */ - -#define IEEE80211_IS_MODE_DFS_MASTER(_opmode) \ - ((_opmode == IEEE80211_M_IBSS) || \ - (_opmode == IEEE80211_M_AHDEMO) || \ - (_opmode == IEEE80211_M_HOSTAP) || \ - (_opmode == IEEE80211_M_WDS)) - -/* - * 802.11g protection mode. - */ -enum ieee80211_protmode { - IEEE80211_PROT_NONE = 0, /* no protection */ - IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ - IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ -}; - -/* - * Authentication mode. - */ -enum ieee80211_authmode { - IEEE80211_AUTH_NONE = 0, - IEEE80211_AUTH_OPEN = 1, /* open */ - IEEE80211_AUTH_SHARED = 2, /* shared-key */ - IEEE80211_AUTH_8021X = 3, /* 802.1x */ - IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ - /* NB: these are used only for ioctls */ - IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ -}; - -/* - * Roaming mode is effectively who controls the operation - * of the 802.11 state machine when operating as a station. - * State transitions are controlled either by the driver - * (typically when management frames are processed by the - * hardware/firmware), the host (auto/normal operation of - * the 802.11 layer), or explicitly through ioctl requests - * when applications like wpa_supplicant want control. - */ -enum ieee80211_roamingmode { - IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ - IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ - IEEE80211_ROAMING_MANUAL= 2, /* application control */ -}; - -/* - * Scanning mode controls station scanning work; this is - * used only when roaming mode permits the host to select - * the bss to join/channel to use. - */ -enum ieee80211_scanmode { - IEEE80211_SCAN_DEVICE = 0, /* driver/hardware control */ - IEEE80211_SCAN_BEST = 1, /* 802.11 layer selects best */ - IEEE80211_SCAN_FIRST = 2, /* take first suitable candidate */ -}; - -enum ieee80211_scanflags { - IEEE80211_NOSCAN_DEFAULT = (1 << 0), - IEEE80211_NOSCAN_SET = (1 << 1), -}; - -/* - * Channels are specified by frequency and attributes. - */ -struct ieee80211_channel { - u_int16_t ic_freq; /* setting in MHz */ - u_int16_t ic_flags; /* see below */ - u_int8_t ic_ieee; /* IEEE channel number */ - int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ - int8_t ic_maxpower; /* maximum tx power in dBm */ - int8_t ic_minpower; /* minimum tx power in dBm */ - u_int8_t ic_scanflags; - u_int8_t ic_idletime; /* phy idle time in % */ -}; - -#define IEEE80211_CHAN_MAX 255 -#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */ -#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ -#define IEEE80211_CHAN_ANYC ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) - -#define IEEE80211_RADAR_CHANCHANGE_TBTT_COUNT 0 -#define IEEE80211_DEFAULT_CHANCHANGE_TBTT_COUNT 3 - -#define IEEE80211_RADAR_TEST_MUTE_CHAN 36 /* Move to channel 36 for mute test */ - -/* bits 0-3 are for private use by drivers */ -/* channel attributes */ -#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ -#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ -#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ -#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ -#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ -#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ -#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ -#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ -#define IEEE80211_CHAN_RADAR 0x1000 /* Radar found on channel */ -#define IEEE80211_CHAN_STURBO 0x2000 /* 11a static turbo channel only */ -#define IEEE80211_CHAN_HALF 0x4000 /* Half rate channel */ -#define IEEE80211_CHAN_QUARTER 0x8000 /* Quarter rate channel */ - -/* - * Useful combinations of channel characteristics. - */ -#define IEEE80211_CHAN_FHSS \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) -#define IEEE80211_CHAN_A \ - (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) -#define IEEE80211_CHAN_B \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) -#define IEEE80211_CHAN_PUREG \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) -#define IEEE80211_CHAN_G \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) -#define IEEE80211_CHAN_108A \ - (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) -#define IEEE80211_CHAN_108G \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) -#define IEEE80211_CHAN_ST \ - (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) - -#define IEEE80211_CHAN_ALL \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ - IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN) -#define IEEE80211_CHAN_ALLTURBO \ - (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) - -#define IEEE80211_IS_CHAN_FHSS(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) -#define IEEE80211_IS_CHAN_A(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) -#define IEEE80211_IS_CHAN_B(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) -#define IEEE80211_IS_CHAN_PUREG(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) -#define IEEE80211_IS_CHAN_G(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) -#define IEEE80211_IS_CHAN_ANYG(_c) \ - (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) -#define IEEE80211_IS_CHAN_ST(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) -#define IEEE80211_IS_CHAN_108A(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) -#define IEEE80211_IS_CHAN_108G(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) - -#define IEEE80211_IS_CHAN_2GHZ(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) -#define IEEE80211_IS_CHAN_5GHZ(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) -#define IEEE80211_IS_CHAN_OFDM(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0) -#define IEEE80211_IS_CHAN_CCK(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0) -#define IEEE80211_IS_CHAN_GFSK(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) -#define IEEE80211_IS_CHAN_TURBO(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) -#define IEEE80211_IS_CHAN_STURBO(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) -#define IEEE80211_IS_CHAN_DTURBO(_c) \ - (((_c)->ic_flags & \ - (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) -#define IEEE80211_IS_CHAN_HALF(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) -#define IEEE80211_IS_CHAN_QUARTER(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) - -#define IEEE80211_IS_CHAN_RADAR(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_RADAR) != 0) -#define IEEE80211_IS_CHAN_PASSIVE(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) -#define IEEE80211_ARE_CHANS_SAME_MODE(_a, _b) \ - (((_a)->ic_flags & IEEE80211_CHAN_ALLTURBO) == ((_b)->ic_flags & IEEE80211_CHAN_ALLTURBO)) - -/* ni_chan encoding for FH phy */ -#define IEEE80211_FH_CHANMOD 80 -#define IEEE80211_FH_CHAN(set,pat) (((set) - 1) * IEEE80211_FH_CHANMOD + (pat)) -#define IEEE80211_FH_CHANSET(chan) ((chan) / IEEE80211_FH_CHANMOD + 1) -#define IEEE80211_FH_CHANPAT(chan) ((chan) % IEEE80211_FH_CHANMOD) - -/* - * Spectrum Management (IEEE 802.11h-2003) - */ - -/* algorithm for (re)association based on supported channels - * (the one mentioned in 11.6.1 as out of scope of .11h) */ -enum ieee80211_sc_algorithm { - IEEE80211_SC_NONE, - /* - * Do not disallow anyone from associating. When needed, channel will - * be switched to the most suitable channel, no matter client stations - * support it or not. - */ - - IEEE80211_SC_LOOSE, - /* - * Do not disallow anyone from associating. When needed, channel will - * be switched to a suitable channel, which will be chosen taking - * ni->ni_suppchans and ic->ic_sc_sldg under consideration. - */ - - IEEE80211_SC_TIGHT, - /* - * Allow to associate if there are at least ic->ic_mincom channels - * common to the associating station and all of the already associated - * stations. If the number of new common channels is less than - * required, consider disassociating some other STAs. Such a - * disassociation will be performed if (and only if) the association we - * are currently considering would be then possible and the count of - * the resultant set of common channels (ic_chan_nodes[i] == - * ic_cn_total) would increase by some amount. Whether the number of - * the new channels that could be gained is enough to sacrifice a - * number of STAs is determined by the ic->ic_slcg parameter. - */ - - IEEE80211_SC_STRICT - /* - * Basically the same behavior as IEEE80211_SC_TIGHT, except that if a - * station does not specify Supported Channels, then it is denied to - * associate. - */ -}; - -/* - * 802.11 rate set. - */ -#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ -#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ -#define IEEE80211_SANITISE_RATESIZE(_rsz) \ - ((_rsz > IEEE80211_RATE_MAXSIZE) ? IEEE80211_RATE_MAXSIZE : _rsz) - -struct ieee80211_rateset { - u_int8_t rs_nrates; - u_int8_t rs_rates[IEEE80211_RATE_MAXSIZE]; -}; - -struct ieee80211_roam { - int8_t rssi11a; /* rssi thresh for 11a bss */ - int8_t rssi11b; /* for 11g sta in 11b bss */ - int8_t rssi11bOnly; /* for 11b sta */ - u_int8_t pad1; - u_int8_t rate11a; /* rate thresh for 11a bss */ - u_int8_t rate11b; /* for 11g sta in 11b bss */ - u_int8_t rate11bOnly; /* for 11b sta */ - u_int8_t pad2; -}; -#endif /* _NET80211__IEEE80211_H_ */ diff --git a/package/hostapd/madwifi/net80211/ieee80211.h b/package/hostapd/madwifi/net80211/ieee80211.h deleted file mode 100644 index a39d4b9..0000000 --- a/package/hostapd/madwifi/net80211/ieee80211.h +++ /dev/null @@ -1,997 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211.h 3268 2008-01-26 20:48:11Z mtaylor $ - */ -#ifndef _NET80211_IEEE80211_H_ -#define _NET80211_IEEE80211_H_ - -/* - * 802.11 protocol definitions. - */ - -#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ -/* is 802.11 address multicast/broadcast? */ -#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) - -/* IEEE 802.11 PLCP header */ -struct ieee80211_plcp_hdr { - u_int16_t i_sfd; - u_int8_t i_signal; - u_int8_t i_service; - u_int16_t i_length; - u_int16_t i_crc; -} __packed; - -#define IEEE80211_PLCP_SFD 0xF3A0 -#define IEEE80211_PLCP_SERVICE 0x00 - -/* - * generic definitions for IEEE 802.11 frames - */ -struct ieee80211_frame { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ - /* see below */ -} __packed; - -struct ieee80211_qosframe { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_qos[2]; - /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ - /* see below */ -} __packed; - -struct ieee80211_qoscntl { - u_int8_t i_qos[2]; -}; - -struct ieee80211_frame_addr4 { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_addr4[IEEE80211_ADDR_LEN]; -} __packed; - - -struct ieee80211_qosframe_addr4 { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_addr4[IEEE80211_ADDR_LEN]; - u_int8_t i_qos[2]; -} __packed; - -struct ieee80211_ctlframe_addr2 { - u_int8_t i_fc[2]; - __le16 i_aidordur; /* AID or duration */ - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; -} __packed; - -#define IEEE80211_FC0_VERSION_MASK 0x03 -#define IEEE80211_FC0_VERSION_SHIFT 0 -#define IEEE80211_FC0_VERSION_0 0x00 -#define IEEE80211_FC0_TYPE_MASK 0x0c -#define IEEE80211_FC0_TYPE_SHIFT 2 -#define IEEE80211_FC0_TYPE_MGT 0x00 -#define IEEE80211_FC0_TYPE_CTL 0x04 -#define IEEE80211_FC0_TYPE_DATA 0x08 - -#define IEEE80211_FC0_SUBTYPE_MASK 0xf0 -#define IEEE80211_FC0_SUBTYPE_SHIFT 4 -/* for TYPE_MGT */ -#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 -#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 -#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 -#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 -#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 -#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 -#define IEEE80211_FC0_SUBTYPE_BEACON 0x80 -#define IEEE80211_FC0_SUBTYPE_ATIM 0x90 -#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 -#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 -#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 -#define IEEE80211_FC0_SUBTYPE_ACTION 0xd0 -/* for TYPE_CTL */ -#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 -#define IEEE80211_FC0_SUBTYPE_RTS 0xb0 -#define IEEE80211_FC0_SUBTYPE_CTS 0xc0 -#define IEEE80211_FC0_SUBTYPE_ACK 0xd0 -#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 -#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 -/* for TYPE_DATA (bit combination) */ -#define IEEE80211_FC0_SUBTYPE_DATA 0x00 -#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 -#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 -#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 -#define IEEE80211_FC0_SUBTYPE_NODATA 0x40 -#define IEEE80211_FC0_SUBTYPE_CFACK 0x50 -#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 -#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 -#define IEEE80211_FC0_SUBTYPE_QOS 0x80 -#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 - -#define IEEE80211_FC1_DIR_MASK 0x03 -#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ -#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ -#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ -#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ - -#define IEEE80211_FC1_MORE_FRAG 0x04 -#define IEEE80211_FC1_RETRY 0x08 -#define IEEE80211_FC1_PWR_MGT 0x10 -#define IEEE80211_FC1_MORE_DATA 0x20 -#define IEEE80211_FC1_PROT 0x40 -#define IEEE80211_FC1_ORDER 0x80 - -#define IEEE80211_SEQ_FRAG_MASK 0x000f -#define IEEE80211_SEQ_FRAG_SHIFT 0 -#define IEEE80211_SEQ_SEQ_MASK 0xfff0 -#define IEEE80211_SEQ_SEQ_SHIFT 4 - -#define IEEE80211_NWID_LEN 32 - -#define IEEE80211_QOS_TXOP 0x00ff -/* bit 8 is reserved */ -#define IEEE80211_QOS_ACKPOLICY 0x60 -#define IEEE80211_QOS_ACKPOLICY_S 5 -#define IEEE80211_QOS_EOSP 0x10 -#define IEEE80211_QOS_EOSP_S 4 -#define IEEE80211_QOS_TID 0x0f - -#define IEEE80211_FRM_HAS_BODY(_wh) \ - (((_wh)->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != \ - IEEE80211_FC0_TYPE_CTL) - -/* - * Country/Region Codes from MS WINNLS.H - * Numbering from ISO 3166 - * XXX belongs elsewhere - */ -enum CountryCode { - CTRY_ALBANIA = 8, /* Albania */ - CTRY_ALGERIA = 12, /* Algeria */ - CTRY_ARGENTINA = 32, /* Argentina */ - CTRY_ARMENIA = 51, /* Armenia */ - CTRY_AUSTRALIA = 36, /* Australia */ - CTRY_AUSTRIA = 40, /* Austria */ - CTRY_AZERBAIJAN = 31, /* Azerbaijan */ - CTRY_BAHRAIN = 48, /* Bahrain */ - CTRY_BELARUS = 112, /* Belarus */ - CTRY_BELGIUM = 56, /* Belgium */ - CTRY_BELIZE = 84, /* Belize */ - CTRY_BOLIVIA = 68, /* Bolivia */ - CTRY_BRAZIL = 76, /* Brazil */ - CTRY_BRUNEI_DARUSSALAM = 96, /* Brunei Darussalam */ - CTRY_BULGARIA = 100, /* Bulgaria */ - CTRY_CANADA = 124, /* Canada */ - CTRY_CHILE = 152, /* Chile */ - CTRY_CHINA = 156, /* People's Republic of China */ - CTRY_COLOMBIA = 170, /* Colombia */ - CTRY_COSTA_RICA = 188, /* Costa Rica */ - CTRY_CROATIA = 191, /* Croatia */ - CTRY_CYPRUS = 196, - CTRY_CZECH = 203, /* Czech Republic */ - CTRY_DENMARK = 208, /* Denmark */ - CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */ - CTRY_ECUADOR = 218, /* Ecuador */ - CTRY_EGYPT = 818, /* Egypt */ - CTRY_EL_SALVADOR = 222, /* El Salvador */ - CTRY_ESTONIA = 233, /* Estonia */ - CTRY_FAEROE_ISLANDS = 234, /* Faeroe Islands */ - CTRY_FINLAND = 246, /* Finland */ - CTRY_FRANCE = 250, /* France */ - CTRY_FRANCE2 = 255, /* France2 */ - CTRY_GEORGIA = 268, /* Georgia */ - CTRY_GERMANY = 276, /* Germany */ - CTRY_GREECE = 300, /* Greece */ - CTRY_GUATEMALA = 320, /* Guatemala */ - CTRY_HONDURAS = 340, /* Honduras */ - CTRY_HONG_KONG = 344, /* Hong Kong S.A.R., P.R.C. */ - CTRY_HUNGARY = 348, /* Hungary */ - CTRY_ICELAND = 352, /* Iceland */ - CTRY_INDIA = 356, /* India */ - CTRY_INDONESIA = 360, /* Indonesia */ - CTRY_IRAN = 364, /* Iran */ - CTRY_IRAQ = 368, /* Iraq */ - CTRY_IRELAND = 372, /* Ireland */ - CTRY_ISRAEL = 376, /* Israel */ - CTRY_ITALY = 380, /* Italy */ - CTRY_JAMAICA = 388, /* Jamaica */ - CTRY_JAPAN = 392, /* Japan */ - CTRY_JAPAN1 = 393, /* Japan (JP1) */ - CTRY_JAPAN2 = 394, /* Japan (JP0) */ - CTRY_JAPAN3 = 395, /* Japan (JP1-1) */ - CTRY_JAPAN4 = 396, /* Japan (JE1) */ - CTRY_JAPAN5 = 397, /* Japan (JE2) */ - CTRY_JAPAN6 = 399, /* Japan (JP6) */ - CTRY_JAPAN7 = 900, /* Japan */ - CTRY_JAPAN8 = 901, /* Japan */ - CTRY_JAPAN9 = 902, /* Japan */ - CTRY_JAPAN10 = 903, /* Japan */ - CTRY_JAPAN11 = 904, /* Japan */ - CTRY_JAPAN12 = 905, /* Japan */ - CTRY_JAPAN13 = 906, /* Japan */ - CTRY_JAPAN14 = 907, /* Japan */ - CTRY_JAPAN15 = 908, /* Japan */ - CTRY_JAPAN16 = 909, /* Japan */ - CTRY_JAPAN17 = 910, /* Japan */ - CTRY_JAPAN18 = 911, /* Japan */ - CTRY_JAPAN19 = 912, /* Japan */ - CTRY_JAPAN20 = 913, /* Japan */ - CTRY_JAPAN21 = 914, /* Japan */ - CTRY_JAPAN22 = 915, /* Japan */ - CTRY_JAPAN23 = 916, /* Japan */ - CTRY_JAPAN24 = 917, /* Japan */ - CTRY_JAPAN25 = 918, /* Japan */ - CTRY_JAPAN26 = 919, /* Japan */ - CTRY_JAPAN27 = 920, /* Japan */ - CTRY_JAPAN28 = 921, /* Japan */ - CTRY_JAPAN29 = 922, /* Japan */ - CTRY_JAPAN30 = 923, /* Japan */ - CTRY_JAPAN31 = 924, /* Japan */ - CTRY_JAPAN32 = 925, /* Japan */ - CTRY_JAPAN33 = 926, /* Japan */ - CTRY_JAPAN34 = 927, /* Japan */ - CTRY_JAPAN35 = 928, /* Japan */ - CTRY_JAPAN36 = 929, /* Japan */ - CTRY_JAPAN37 = 930, /* Japan */ - CTRY_JAPAN38 = 931, /* Japan */ - CTRY_JAPAN39 = 932, /* Japan */ - CTRY_JAPAN40 = 933, /* Japan */ - CTRY_JAPAN41 = 934, /* Japan */ - CTRY_JAPAN42 = 935, /* Japan */ - CTRY_JAPAN43 = 936, /* Japan */ - CTRY_JAPAN44 = 937, /* Japan */ - CTRY_JAPAN45 = 938, /* Japan */ - CTRY_JAPAN46 = 939, /* Japan */ - CTRY_JAPAN47 = 940, /* Japan */ - CTRY_JAPAN48 = 941, /* Japan */ - CTRY_JORDAN = 400, /* Jordan */ - CTRY_KAZAKHSTAN = 398, /* Kazakhstan */ - CTRY_KENYA = 404, /* Kenya */ - CTRY_KOREA_NORTH = 408, /* North Korea */ - CTRY_KOREA_ROC = 410, /* South Korea */ - CTRY_KOREA_ROC2 = 411, /* South Korea */ - CTRY_KUWAIT = 414, /* Kuwait */ - CTRY_LATVIA = 428, /* Latvia */ - CTRY_LEBANON = 422, /* Lebanon */ - CTRY_LIBYA = 434, /* Libya */ - CTRY_LIECHTENSTEIN = 438, /* Liechtenstein */ - CTRY_LITHUANIA = 440, /* Lithuania */ - CTRY_LUXEMBOURG = 442, /* Luxembourg */ - CTRY_MACAU = 446, /* Macau */ - CTRY_MACEDONIA = 807, /* the Former Yugoslav Republic of Macedonia */ - CTRY_MALAYSIA = 458, /* Malaysia */ - CTRY_MEXICO = 484, /* Mexico */ - CTRY_MONACO = 492, /* Principality of Monaco */ - CTRY_MOROCCO = 504, /* Morocco */ - CTRY_NETHERLANDS = 528, /* Netherlands */ - CTRY_NEW_ZEALAND = 554, /* New Zealand */ - CTRY_NICARAGUA = 558, /* Nicaragua */ - CTRY_NORWAY = 578, /* Norway */ - CTRY_OMAN = 512, /* Oman */ - CTRY_PAKISTAN = 586, /* Islamic Republic of Pakistan */ - CTRY_PANAMA = 591, /* Panama */ - CTRY_PARAGUAY = 600, /* Paraguay */ - CTRY_PERU = 604, /* Peru */ - CTRY_PHILIPPINES = 608, /* Republic of the Philippines */ - CTRY_POLAND = 616, /* Poland */ - CTRY_PORTUGAL = 620, /* Portugal */ - CTRY_PUERTO_RICO = 630, /* Puerto Rico */ - CTRY_QATAR = 634, /* Qatar */ - CTRY_ROMANIA = 642, /* Romania */ - CTRY_RUSSIA = 643, /* Russia */ - CTRY_SAUDI_ARABIA = 682, /* Saudi Arabia */ - CTRY_SINGAPORE = 702, /* Singapore */ - CTRY_SLOVAKIA = 703, /* Slovak Republic */ - CTRY_SLOVENIA = 705, /* Slovenia */ - CTRY_SOUTH_AFRICA = 710, /* South Africa */ - CTRY_SPAIN = 724, /* Spain */ - CTRY_SWEDEN = 752, /* Sweden */ - CTRY_SWITZERLAND = 756, /* Switzerland */ - CTRY_SYRIA = 760, /* Syria */ - CTRY_TAIWAN = 158, /* Taiwan */ - CTRY_THAILAND = 764, /* Thailand */ - CTRY_TRINIDAD_Y_TOBAGO = 780, /* Trinidad y Tobago */ - CTRY_TUNISIA = 788, /* Tunisia */ - CTRY_TURKEY = 792, /* Turkey */ - CTRY_UAE = 784, /* U.A.E. */ - CTRY_UKRAINE = 804, /* Ukraine */ - CTRY_UNITED_KINGDOM = 826, /* United Kingdom */ - CTRY_UNITED_STATES = 840, /* United States */ - CTRY_UNITED_STATES_FCC49 = 842, /* United States (Public Safety)*/ - CTRY_URUGUAY = 858, /* Uruguay */ - CTRY_UZBEKISTAN = 860, /* Uzbekistan */ - CTRY_VENEZUELA = 862, /* Venezuela */ - CTRY_VIET_NAM = 704, /* Viet Nam */ - CTRY_YEMEN = 887, /* Yemen */ - CTRY_ZIMBABWE = 716 /* Zimbabwe */ -}; - -/* - * Generic information element - */ -struct ieee80211_ie { - u_int8_t id; - u_int8_t len; - u_int8_t info[0]; -} __packed; - -/* - * Country information element. - */ -#define IEEE80211_COUNTRY_MAX_TRIPLETS (83) -struct ieee80211_ie_country { - u_int8_t country_id; - u_int8_t country_len; - u_int8_t country_str[3]; - u_int8_t country_triplet[IEEE80211_COUNTRY_MAX_TRIPLETS * 3]; -} __packed; - -/* - * Power Constraint information element. - */ -struct ieee80211_ie_pwrcnstr { - u_int8_t pc_id; /* IEEE80211_ELEMID_PWRCNSTR */ - u_int8_t pc_len; /* == 2 */ - u_int8_t pc_lpc; /* Local Power Constraint [dB] */ -} __packed; - -/* - * Power Capability information element. - */ -struct ieee80211_ie_pwrcap { - u_int8_t pc_id; /* IEEE80211_ELEMID_PWRCAP */ - u_int8_t pc_len; /* == 2 */ - int8_t pc_mintxpow; /* Minimum Transmit Power Capability [dBm] */ - int8_t pc_maxtxpow; /* Maximum Transmit Power Capability [dBm] */ -} __packed; - -/* - * Supported Channels information element. - */ -#define IEEE80211_SUPPCHAN_MAX_PAIRS (127) -struct ieee80211_ie_sc { - u_int8_t sc_id; /* IEEE80211_ELEMID_SUPPCHAN */ - u_int8_t sc_len; /* == 2 * number of sc_subband elements */ - struct { - u_int8_t sc_first; /* First Channel Number */ - u_int8_t sc_number; /* Number of Channels */ - } __packed sc_subband[IEEE80211_SUPPCHAN_MAX_PAIRS]; -} __packed; - -/* - * Channel Switch Announcement information element. - */ -struct ieee80211_ie_csa { - u_int8_t csa_id; /* IEEE80211_ELEMID_CHANSWITCHANN */ - u_int8_t csa_len; /* == 3 */ - u_int8_t csa_mode; /* Channel Switch Mode: 1 == stop transmission until CS */ - u_int8_t csa_chan; /* New Channel Number */ - u_int8_t csa_count; /* TBTTs until Channel Switch happens */ -} __packed; - -/* minimal Channel Switch Count in the initial announcement */ -#define IEEE80211_CSA_PROTECTION_PERIOD 3 - -/* maximum allowed deviance of measurement of intervals between CSA in Beacons */ -#define IEEE80211_CSA_SANITY_THRESHOLD 100 - - -/* does frame have QoS sequence control data */ -#define IEEE80211_QOS_HAS_SEQ(wh) \ - (((wh)->i_fc[0] & \ - (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \ - (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) - -#define WME_QOSINFO_COUNT 0x0f /* Mask for Param Set Count field */ -/* - * WME/802.11e information element. - */ -struct ieee80211_ie_wme { - u_int8_t wme_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t wme_len; /* length in bytes */ - u_int8_t wme_oui[3]; /* 0x00, 0x50, 0xf2 */ - u_int8_t wme_type; /* OUI type */ - u_int8_t wme_subtype; /* OUI subtype */ - u_int8_t wme_version; /* spec revision */ - u_int8_t wme_info; /* QoS info */ -} __packed; - -/* - * WME/802.11e Tspec Element - */ -struct ieee80211_wme_tspec { - u_int8_t ts_id; - u_int8_t ts_len; - u_int8_t ts_oui[3]; - u_int8_t ts_oui_type; - u_int8_t ts_oui_subtype; - u_int8_t ts_version; - u_int8_t ts_tsinfo[3]; - u_int8_t ts_nom_msdu[2]; - u_int8_t ts_max_msdu[2]; - u_int8_t ts_min_svc[4]; - u_int8_t ts_max_svc[4]; - u_int8_t ts_inactv_intv[4]; - u_int8_t ts_susp_intv[4]; - u_int8_t ts_start_svc[4]; - u_int8_t ts_min_rate[4]; - u_int8_t ts_mean_rate[4]; - u_int8_t ts_max_burst[4]; - u_int8_t ts_min_phy[4]; - u_int8_t ts_peak_rate[4]; - u_int8_t ts_delay[4]; - u_int8_t ts_surplus[2]; - u_int8_t ts_medium_time[2]; -} __packed; - -/* - * WME AC parameter field - */ - -struct ieee80211_wme_acparams { - u_int8_t acp_aci_aifsn; - u_int8_t acp_logcwminmax; - u_int16_t acp_txop; -} __packed; - -#define IEEE80211_WME_PARAM_LEN 24 -#define WME_NUM_AC 4 /* 4 AC categories */ - -#define WME_PARAM_ACI 0x60 /* Mask for ACI field */ -#define WME_PARAM_ACI_S 5 /* Shift for ACI field */ -#define WME_PARAM_ACM 0x10 /* Mask for ACM bit */ -#define WME_PARAM_ACM_S 4 /* Shift for ACM bit */ -#define WME_PARAM_AIFSN 0x0f /* Mask for aifsn field */ -#define WME_PARAM_AIFSN_S 0 /* Shift for aifsn field */ -#define WME_PARAM_LOGCWMIN 0x0f /* Mask for CwMin field (in log) */ -#define WME_PARAM_LOGCWMIN_S 0 /* Shift for CwMin field */ -#define WME_PARAM_LOGCWMAX 0xf0 /* Mask for CwMax field (in log) */ -#define WME_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ - -#define WME_AC_TO_TID(_ac) ( \ - ((_ac) == WME_AC_VO) ? 6 : \ - ((_ac) == WME_AC_VI) ? 5 : \ - ((_ac) == WME_AC_BK) ? 1 : \ - 0) - -#define TID_TO_WME_AC(_tid) ( \ - ((_tid) < 1) ? WME_AC_BE : \ - ((_tid) < 3) ? WME_AC_BK : \ - ((_tid) < 6) ? WME_AC_VI : \ - WME_AC_VO) - -/* - * WME Parameter Element - */ - -struct ieee80211_wme_param { - u_int8_t param_id; - u_int8_t param_len; - u_int8_t param_oui[3]; - u_int8_t param_oui_type; - u_int8_t param_oui_sybtype; - u_int8_t param_version; - u_int8_t param_qosInfo; - u_int8_t param_reserved; - struct ieee80211_wme_acparams params_acParams[WME_NUM_AC]; -} __packed; - -/* - * WME U-APSD qos info field defines - */ -#define WME_CAPINFO_UAPSD_EN 0x00000080 -#define WME_CAPINFO_UAPSD_VO 0x00000001 -#define WME_CAPINFO_UAPSD_VI 0x00000002 -#define WME_CAPINFO_UAPSD_BK 0x00000004 -#define WME_CAPINFO_UAPSD_BE 0x00000008 -#define WME_CAPINFO_UAPSD_ACFLAGS_SHIFT 0 -#define WME_CAPINFO_UAPSD_ACFLAGS_MASK 0xF -#define WME_CAPINFO_UAPSD_MAXSP_SHIFT 5 -#define WME_CAPINFO_UAPSD_MAXSP_MASK 0x3 -#define WME_CAPINFO_IE_OFFSET 8 -#define WME_UAPSD_MAXSP(_qosinfo) \ - (((_qosinfo) >> WME_CAPINFO_UAPSD_MAXSP_SHIFT) & \ - WME_CAPINFO_UAPSD_MAXSP_MASK) -#define WME_UAPSD_AC_ENABLED(_ac, _qosinfo) \ - ((1 << (3 - (_ac))) & ( \ - ((_qosinfo) >> WME_CAPINFO_UAPSD_ACFLAGS_SHIFT) & \ - WME_CAPINFO_UAPSD_ACFLAGS_MASK)) - -/* - * Atheros Advanced Capability information element. - */ -struct ieee80211_ie_athAdvCap { - u_int8_t athAdvCap_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t athAdvCap_len; /* length in bytes */ - u_int8_t athAdvCap_oui[3]; /* 0x00, 0x03, 0x7f */ - u_int8_t athAdvCap_type; /* OUI type */ - u_int8_t athAdvCap_subtype; /* OUI subtype */ - u_int8_t athAdvCap_version; /* spec revision */ - u_int8_t athAdvCap_capability; /* Capability info */ - u_int16_t athAdvCap_defKeyIndex; -} __packed; - -/* - * Atheros XR information element. - */ -struct ieee80211_xr_param { - u_int8_t param_id; - u_int8_t param_len; - u_int8_t param_oui[3]; - u_int8_t param_oui_type; - u_int8_t param_oui_sybtype; - u_int8_t param_version; - u_int8_t param_Info; - u_int8_t param_base_bssid[IEEE80211_ADDR_LEN]; - u_int8_t param_xr_bssid[IEEE80211_ADDR_LEN]; - u_int16_t param_xr_beacon_interval; - u_int8_t param_base_ath_capability; - u_int8_t param_xr_ath_capability; -} __packed; - -/* Atheros capabilities */ -#define IEEE80211_ATHC_TURBOP 0x0001 /* Turbo Prime */ -#define IEEE80211_ATHC_COMP 0x0002 /* Compression */ -#define IEEE80211_ATHC_FF 0x0004 /* Fast Frames */ -#define IEEE80211_ATHC_XR 0x0008 /* Xtended Range support */ -#define IEEE80211_ATHC_AR 0x0010 /* Advanced Radar support */ -#define IEEE80211_ATHC_BURST 0x0020 /* Bursting - not negotiated */ -#define IEEE80211_ATHC_WME 0x0040 /* CWMin tuning */ -#define IEEE80211_ATHC_BOOST 0x0080 /* Boost */ - -/* - * Management Notification Frame - */ -struct ieee80211_mnf { - u_int8_t mnf_category; - u_int8_t mnf_action; - u_int8_t mnf_dialog; - u_int8_t mnf_status; -} __packed; -#define MNF_SETUP_REQ 0 -#define MNF_SETUP_RESP 1 -#define MNF_TEARDOWN 2 - -/* - * Control frames. - */ -struct ieee80211_frame_min { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_rts { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - u_int8_t i_ta[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_cts { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_ack { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_pspoll { - u_int8_t i_fc[2]; - u_int8_t i_aid[2]; - u_int8_t i_bssid[IEEE80211_ADDR_LEN]; - u_int8_t i_ta[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_cfend { /* NB: also CF-End+CF-Ack */ - u_int8_t i_fc[2]; - __le16 i_dur; /* should be zero */ - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - u_int8_t i_bssid[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -/* - * BEACON management packets - * - * octet timestamp[8] - * octet beacon interval[2] - * octet capability information[2] - * information element - * octet elemid - * octet length - * octet information[length] - */ - -typedef u_int8_t *ieee80211_mgt_beacon_t; - -#define IEEE80211_BEACON_INTERVAL(beacon) \ - ((beacon)[8] | ((beacon)[9] << 8)) -#define IEEE80211_BEACON_CAPABILITY(beacon) \ - ((beacon)[10] | ((beacon)[11] << 8)) - -#define IEEE80211_CAPINFO_ESS 0x0001 -#define IEEE80211_CAPINFO_IBSS 0x0002 -#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004 -#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008 -#define IEEE80211_CAPINFO_PRIVACY 0x0010 -#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020 -#define IEEE80211_CAPINFO_PBCC 0x0040 -#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080 -/* bits 8-9 are reserved (8 now for spectrum management) */ -#define IEEE80211_CAPINFO_SPECTRUM_MGMT 0x0100 -#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400 -#define IEEE80211_CAPINFO_RSN 0x0800 -/* bit 12 is reserved */ -#define IEEE80211_CAPINFO_DSSSOFDM 0x2000 -/* bits 14-15 are reserved */ - -/* - * 802.11i/WPA information element (maximally sized). - */ -struct ieee80211_ie_wpa { - u_int8_t wpa_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t wpa_len; /* length in bytes */ - u_int8_t wpa_oui[3]; /* 0x00, 0x50, 0xf2 */ - u_int8_t wpa_type; /* OUI type */ - u_int16_t wpa_version; /* spec revision */ - u_int32_t wpa_mcipher[1]; /* multicast/group key cipher */ - u_int16_t wpa_uciphercnt; /* # pairwise key ciphers */ - u_int32_t wpa_uciphers[8]; /* ciphers */ - u_int16_t wpa_authselcnt; /* authentication selector cnt*/ - u_int32_t wpa_authsels[8]; /* selectors */ - u_int16_t wpa_caps; /* 802.11i capabilities */ - u_int16_t wpa_pmkidcnt; /* 802.11i pmkid count */ - u_int16_t wpa_pmkids[8]; /* 802.11i pmkids */ -} __packed; - -/* - * Management information element payloads. - */ - -enum { - IEEE80211_ELEMID_SSID = 0, - IEEE80211_ELEMID_RATES = 1, - IEEE80211_ELEMID_FHPARMS = 2, - IEEE80211_ELEMID_DSPARMS = 3, - IEEE80211_ELEMID_CFPARMS = 4, - IEEE80211_ELEMID_TIM = 5, - IEEE80211_ELEMID_IBSSPARMS = 6, - IEEE80211_ELEMID_COUNTRY = 7, - IEEE80211_ELEMID_HOPPATRNPARMS = 8, - IEEE80211_ELEMID_HOPPATRNTABLE = 9, - IEEE80211_ELEMID_REQINFO = 10, - IEEE80211_ELEMID_QBSSLOAD = 11, - IEEE80211_ELEMID_EDCAPARAM = 12, - IEEE80211_ELEMID_TSPEC = 13, - IEEE80211_ELEMID_TRAFCLASS = 14, - IEEE80211_ELEMID_SCHEDULE = 15, - IEEE80211_ELEMID_CHALLENGE = 16, - /* 17-31 reserved for challenge text extension */ - IEEE80211_ELEMID_PWRCNSTR = 32, - IEEE80211_ELEMID_PWRCAP = 33, - IEEE80211_ELEMID_TPCREQ = 34, - IEEE80211_ELEMID_TPCREP = 35, - IEEE80211_ELEMID_SUPPCHAN = 36, - IEEE80211_ELEMID_CHANSWITCHANN = 37, - IEEE80211_ELEMID_MEASREQ = 38, - IEEE80211_ELEMID_MEASREP = 39, - IEEE80211_ELEMID_QUIET = 40, - IEEE80211_ELEMID_IBSSDFS = 41, - IEEE80211_ELEMID_ERP = 42, - IEEE80211_ELEMID_TSDELAY = 43, - IEEE80211_ELEMID_TCLASSPROC = 44, - IEEE80211_ELEMID_QOS = 46, - IEEE80211_ELEMID_RSN = 48, - /* 49 reserved */ - IEEE80211_ELEMID_XRATES = 50, - /* 128-129 proprietary elements used by Agere chipsets */ - IEEE80211_ELEMID_AGERE1 = 128, - IEEE80211_ELEMID_AGERE2 = 129, - IEEE80211_ELEMID_TPC = 150, - IEEE80211_ELEMID_CCKM = 156, - IEEE80211_ELEMID_VENDOR = 221, /* vendor private */ -}; - -#define IEEE80211_CHANSWITCHANN_BYTES 5 -#define BITCTL_BUFD_MCAST 1 -#define BITCTL_BUFD_UCAST_AID_MASK ((u_int8_t)~(BITCTL_BUFD_MCAST)) -#define BITCTL_BUFD_UCAST_AID_SHIFT 1 - -struct ieee80211_tim_ie { - u_int8_t tim_ie; /* IEEE80211_ELEMID_TIM */ - u_int8_t tim_len; - u_int8_t tim_count; /* DTIM count */ - u_int8_t tim_period; /* DTIM period */ - u_int8_t tim_bitctl; /* bitmap control */ - u_int8_t tim_bitmap[1]; /* variable-length bitmap */ -} __packed; - -struct ieee80211_country_ie { - u_int8_t ie; /* IEEE80211_ELEMID_COUNTRY */ - u_int8_t len; - u_int8_t cc[3]; /* ISO CC+(I)ndoor/(O)utdoor */ - struct { - u_int8_t schan; /* starting channel */ - u_int8_t nchan; /* number channels */ - u_int8_t maxtxpwr; /* tx power cap */ - } __packed band[4]; /* up to 4 sub bands */ -} __packed; - -#define IEEE80211_CHALLENGE_LEN 128 - -#define IEEE80211_SUPPCHAN_LEN 26 - -#define IEEE80211_RATE_BASIC 0x80 -#define IEEE80211_RATE_VAL 0x7f - -/* EPR information element flags */ -#define IEEE80211_ERP_NON_ERP_PRESENT 0x01 -#define IEEE80211_ERP_USE_PROTECTION 0x02 -#define IEEE80211_ERP_LONG_PREAMBLE 0x04 - -/* Atheros private advanced capabilities info */ -#define ATHEROS_CAP_TURBO_PRIME 0x01 -#define ATHEROS_CAP_COMPRESSION 0x02 -#define ATHEROS_CAP_FAST_FRAME 0x04 -/* bits 3-6 reserved */ -#define ATHEROS_CAP_BOOST 0x80 - -#define ATH_OUI 0x7f0300 /* Atheros OUI */ -#define ATH_OUI_TYPE 0x01 -#define ATH_OUI_SUBTYPE 0x01 -#define ATH_OUI_VERSION 0x00 -#define ATH_OUI_TYPE_XR 0x03 -#define ATH_OUI_SUBTYPE_XR 0x01 -#define ATH_OUI_VER_XR 0x00 - -#define WPA_OUI 0xf25000 -#define WPA_OUI_TYPE 0x01 -#define WPA_VERSION 1 /* current supported version */ - -#define WPA_CSE_NULL 0x00 -#define WPA_CSE_WEP40 0x01 -#define WPA_CSE_TKIP 0x02 -#define WPA_CSE_CCMP 0x04 -#define WPA_CSE_WEP104 0x05 - -#define WPA_ASE_NONE 0x00 -#define WPA_ASE_8021X_UNSPEC 0x01 -#define WPA_ASE_8021X_PSK 0x02 - -#define RSN_OUI 0xac0f00 -#define RSN_VERSION 1 /* current supported version */ - -#define RSN_CSE_NULL 0x00 -#define RSN_CSE_WEP40 0x01 -#define RSN_CSE_TKIP 0x02 -#define RSN_CSE_WRAP 0x03 -#define RSN_CSE_CCMP 0x04 -#define RSN_CSE_WEP104 0x05 - -#define RSN_ASE_NONE 0x00 -#define RSN_ASE_8021X_UNSPEC 0x01 -#define RSN_ASE_8021X_PSK 0x02 - -#define RSN_CAP_PREAUTH 0x01 - -#define WME_OUI 0xf25000 -#define WME_OUI_TYPE 0x02 -#define WME_INFO_OUI_SUBTYPE 0x00 -#define WME_PARAM_OUI_SUBTYPE 0x01 -#define WME_VERSION 1 - -/* WME stream classes */ -#define WME_AC_BE 0 /* best effort */ -#define WME_AC_BK 1 /* background */ -#define WME_AC_VI 2 /* video */ -#define WME_AC_VO 3 /* voice */ - -/* - * AUTH management packets - * - * octet algo[2] - * octet seq[2] - * octet status[2] - * octet chal.id - * octet chal.length - * octet chal.text[253] - */ - -typedef u_int8_t *ieee80211_mgt_auth_t; - -#define IEEE80211_AUTH_ALGORITHM(auth) \ - ((auth)[0] | ((auth)[1] << 8)) -#define IEEE80211_AUTH_TRANSACTION(auth) \ - ((auth)[2] | ((auth)[3] << 8)) -#define IEEE80211_AUTH_STATUS(auth) \ - ((auth)[4] | ((auth)[5] << 8)) - -#define IEEE80211_AUTH_ALG_OPEN 0x0000 -#define IEEE80211_AUTH_ALG_SHARED 0x0001 -#define IEEE80211_AUTH_ALG_LEAP 0x0080 - -enum { - IEEE80211_AUTH_OPEN_REQUEST = 1, - IEEE80211_AUTH_OPEN_RESPONSE = 2, -}; - -enum { - IEEE80211_AUTH_SHARED_REQUEST = 1, - IEEE80211_AUTH_SHARED_CHALLENGE = 2, - IEEE80211_AUTH_SHARED_RESPONSE = 3, - IEEE80211_AUTH_SHARED_PASS = 4, -}; - -/* - * Reason codes - * - * Unlisted codes are reserved - */ - -enum { - IEEE80211_REASON_UNSPECIFIED = 1, - IEEE80211_REASON_AUTH_EXPIRE = 2, - IEEE80211_REASON_AUTH_LEAVE = 3, - IEEE80211_REASON_ASSOC_EXPIRE = 4, - IEEE80211_REASON_ASSOC_TOOMANY = 5, - IEEE80211_REASON_NOT_AUTHED = 6, - IEEE80211_REASON_NOT_ASSOCED = 7, - IEEE80211_REASON_ASSOC_LEAVE = 8, - IEEE80211_REASON_ASSOC_NOT_AUTHED = 9, - - IEEE80211_REASON_PWRCAP_UNACCEPTABLE = 10, - IEEE80211_REASON_SUPPCHAN_UNACCEPTABLE = 11, - IEEE80211_REASON_RSN_REQUIRED = 11, - IEEE80211_REASON_RSN_INCONSISTENT = 12, - IEEE80211_REASON_IE_INVALID = 13, - IEEE80211_REASON_MIC_FAILURE = 14, - - IEEE80211_STATUS_SUCCESS = 0, - IEEE80211_STATUS_UNSPECIFIED = 1, - IEEE80211_STATUS_CAPINFO = 10, - IEEE80211_STATUS_NOT_ASSOCED = 11, - IEEE80211_STATUS_OTHER = 12, - IEEE80211_STATUS_ALG = 13, - IEEE80211_STATUS_SEQUENCE = 14, - IEEE80211_STATUS_CHALLENGE = 15, - IEEE80211_STATUS_TIMEOUT = 16, - IEEE80211_STATUS_TOOMANY = 17, - IEEE80211_STATUS_BASIC_RATE = 18, - IEEE80211_STATUS_SP_REQUIRED = 19, - IEEE80211_STATUS_PBCC_REQUIRED = 20, - IEEE80211_STATUS_CA_REQUIRED = 21, - IEEE80211_STATUS_SM_REQUIRED = 22, - IEEE80211_STATUS_PWRCAP_UNACCEPTABLE = 23, - IEEE80211_STATUS_SUPPCHAN_UNACCEPTABLE = 24, - IEEE80211_STATUS_TOO_MANY_STATIONS = 22, - IEEE80211_STATUS_RATES = 23, - IEEE80211_STATUS_SHORTSLOT_REQUIRED = 25, - IEEE80211_STATUS_DSSSOFDM_REQUIRED = 26, -}; - -#define IEEE80211_WEP_KEYLEN 5 /* 40bit */ -#define IEEE80211_WEP_IVLEN 3 /* 24bit */ -#define IEEE80211_WEP_KIDLEN 1 /* 1 octet */ -#define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */ -#define IEEE80211_WEP_NKID 4 /* number of key ids */ - -/* - * 802.11i defines an extended IV for use with non-WEP ciphers. - * When the EXTIV bit is set in the key id byte an additional - * 4 bytes immediately follow the IV for TKIP. For CCMP the - * EXTIV bit is likewise set but the 8 bytes represent the - * CCMP header rather than IV+extended-IV. - */ -#define IEEE80211_WEP_EXTIV 0x20 -#define IEEE80211_WEP_EXTIVLEN 4 /* extended IV length */ -#define IEEE80211_WEP_MICLEN 8 /* trailing MIC */ - -#define IEEE80211_CRC_LEN 4 - -/* - * Maximum acceptable MTU is: - * IEEE80211_MAX_LEN - WEP overhead - CRC - - * QoS overhead - RSN/WPA overhead - * Min is arbitrarily chosen > IEEE80211_MIN_LEN. The default - * mtu is Ethernet-compatible; it's set by ether_ifattach. - */ -#define IEEE80211_MTU_MAX 2290 -#define IEEE80211_MTU_MIN 32 - -#define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \ - (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN)) -#define IEEE80211_ACK_LEN \ - (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN) -#define IEEE80211_MIN_LEN \ - (sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN) - -/* - * The 802.11 spec says at most 2007 stations may be - * associated at once. For most APs this is way more - * than is feasible so we use a default of 128. This - * number may be overridden by the driver and/or by - * user configuration. - */ -#define IEEE80211_AID_MAX 2007 -#define IEEE80211_AID_DEF 128 - -#define IEEE80211_AID(b) ((b) &~ 0xc000) - -/* - * RTS frame length parameters. The default is specified in - * the 802.11 spec. The max may be wrong for jumbo frames. - */ -#define IEEE80211_RTS_DEFAULT 512 -#define IEEE80211_RTS_MIN 1 -#define IEEE80211_RTS_MAX 2346 - -/* - * Regulatory extension identifier for country IE. - */ -#define IEEE80211_REG_EXT_ID 201 - -/* - * IEEE 802.11 timer synchronization function (TSF) timestamp length - */ -#define IEEE80211_TSF_LEN 8 - -#endif /* _NET80211_IEEE80211_H_ */ diff --git a/package/hostapd/madwifi/net80211/ieee80211_crypto.h b/package/hostapd/madwifi/net80211/ieee80211_crypto.h deleted file mode 100644 index b34f359..0000000 --- a/package/hostapd/madwifi/net80211/ieee80211_crypto.h +++ /dev/null @@ -1,207 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211_crypto.h 3068 2007-12-21 17:46:02Z mentor $ - */ -#ifndef _NET80211_IEEE80211_CRYPTO_H_ -#define _NET80211_IEEE80211_CRYPTO_H_ - -/* - * 802.11 protocol crypto-related definitions. - */ -#define IEEE80211_KEYBUF_SIZE 16 -#define IEEE80211_MICBUF_SIZE (8 + 8) /* space for both TX & RX keys */ -#define IEEE80211_TID_SIZE 17 /* total number of TIDs */ - -/* - * Old WEP-style key. Deprecated. - */ -struct ieee80211_wepkey { - u_int wk_len; /* key length in bytes */ - u_int8_t wk_key[IEEE80211_KEYBUF_SIZE]; -}; - -struct ieee80211_cipher; - -/* - * Crypto key state. There is sufficient room for all supported - * ciphers (see below). The underlying ciphers are handled - * separately through loadable cipher modules that register with - * the generic crypto support. A key has a reference to an instance - * of the cipher; any per-key state is hung off wk_private by the - * cipher when it is attached. Ciphers are automatically called - * to detach and cleanup any such state when the key is deleted. - * - * The generic crypto support handles encap/decap of cipher-related - * frame contents for both hardware- and software-based implementations. - * A key requiring software crypto support is automatically flagged and - * the cipher is expected to honor this and do the necessary work. - * Ciphers such as TKIP may also support mixed hardware/software - * encrypt/decrypt and MIC processing. - */ - -typedef u_int16_t ieee80211_keyix_t; - -/* XXX pack better? */ -/* XXX 48-bit rsc/tsc */ -struct ieee80211_key { - u_int8_t wk_keylen; /* key length in bytes */ - u_int8_t wk_flags; -#define IEEE80211_KEY_XMIT 0x01 /* key used for xmit */ -#define IEEE80211_KEY_RECV 0x02 /* key used for recv */ -#define IEEE80211_KEY_GROUP 0x04 /* key used for WPA group operation */ -#define IEEE80211_KEY_SWCRYPT 0x10 /* host-based encrypt/decrypt */ -#define IEEE80211_KEY_SWMIC 0x20 /* host-based enmic/demic */ - ieee80211_keyix_t wk_keyix; /* key index */ - u_int8_t wk_key[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -#define wk_txmic wk_key+IEEE80211_KEYBUF_SIZE+0 /* XXX can't () right */ -#define wk_rxmic wk_key+IEEE80211_KEYBUF_SIZE+8 /* XXX can't () right */ - u_int64_t wk_keyrsc[IEEE80211_TID_SIZE]; /* key receive sequence counter */ - u_int64_t wk_keytsc; /* key transmit sequence counter */ - const struct ieee80211_cipher *wk_cipher; - void *wk_private; /* private cipher state */ -}; -#define IEEE80211_KEY_COMMON /* common flags passed in by apps */\ - (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV | IEEE80211_KEY_GROUP) - -/* - * NB: these values are ordered carefully; there are lots of - * of implications in any reordering. In particular beware - * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY. - */ -#define IEEE80211_CIPHER_WEP 0 -#define IEEE80211_CIPHER_TKIP 1 -#define IEEE80211_CIPHER_AES_OCB 2 -#define IEEE80211_CIPHER_AES_CCM 3 -#define IEEE80211_CIPHER_CKIP 5 -#define IEEE80211_CIPHER_NONE 6 /* pseudo value */ - -#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE + 1) - -#define IEEE80211_KEYIX_NONE ((ieee80211_keyix_t)-1) - -#if defined(__KERNEL__) || defined(_KERNEL) - -struct ieee80211com; -struct ieee80211vap; -struct ieee80211_node; -struct sk_buff; - -void ieee80211_crypto_attach(struct ieee80211com *); -void ieee80211_crypto_detach(struct ieee80211com *); -void ieee80211_crypto_vattach(struct ieee80211vap *); -void ieee80211_crypto_vdetach(struct ieee80211vap *); -int ieee80211_crypto_newkey(struct ieee80211vap *, int, int, - struct ieee80211_key *); -int ieee80211_crypto_delkey(struct ieee80211vap *, struct ieee80211_key *, - struct ieee80211_node *); -int ieee80211_crypto_setkey(struct ieee80211vap *, struct ieee80211_key *, - const u_int8_t macaddr[IEEE80211_ADDR_LEN], struct ieee80211_node *); -void ieee80211_crypto_delglobalkeys(struct ieee80211vap *); - -/* - * Template for a supported cipher. Ciphers register with the - * crypto code and are typically loaded as separate modules - * (the null cipher is always present). - * XXX may need refcnts - */ -struct ieee80211_cipher { - const char *ic_name; /* printable name */ - u_int ic_cipher; /* IEEE80211_CIPHER_* */ - u_int ic_header; /* size of privacy header (bytes) */ - u_int ic_trailer; /* size of privacy trailer (bytes) */ - u_int ic_miclen; /* size of mic trailer (bytes) */ - void *(*ic_attach)(struct ieee80211vap *, struct ieee80211_key *); - void (*ic_detach)(struct ieee80211_key *); - int (*ic_setkey)(struct ieee80211_key *); - int (*ic_encap)(struct ieee80211_key *, struct sk_buff *, u_int8_t); - int (*ic_decap)(struct ieee80211_key *, struct sk_buff *, int); - int (*ic_enmic)(struct ieee80211_key *, struct sk_buff *, int); - int (*ic_demic)(struct ieee80211_key *, struct sk_buff *, int, int); -}; -extern const struct ieee80211_cipher ieee80211_cipher_none; - -void ieee80211_crypto_register(const struct ieee80211_cipher *); -void ieee80211_crypto_unregister(const struct ieee80211_cipher *); -int ieee80211_crypto_available(struct ieee80211vap*, u_int); - -struct ieee80211_key *ieee80211_crypto_encap(struct ieee80211_node *, - struct sk_buff *); -struct ieee80211_key *ieee80211_crypto_decap(struct ieee80211_node *, - struct sk_buff *, int); - -/* - * Check and remove any MIC. - */ -static __inline int -ieee80211_crypto_demic(struct ieee80211vap *vap, struct ieee80211_key *k, - struct sk_buff *skb, int hdrlen, int force) -{ - const struct ieee80211_cipher *cip = k->wk_cipher; - return (cip->ic_miclen > 0 ? cip->ic_demic(k, skb, hdrlen, force) : 1); -} - -/* - * Add any MIC. - */ -static __inline int -ieee80211_crypto_enmic(struct ieee80211vap *vap, struct ieee80211_key *k, - struct sk_buff *skb, int force) -{ - const struct ieee80211_cipher *cip = k->wk_cipher; - return (cip->ic_miclen > 0 ? cip->ic_enmic(k, skb, force) : 1); -} - -/* - * Reset key state to an unused state. The crypto - * key allocation mechanism ensures other state (e.g. - * key data) is properly setup before a key is used. - */ -static __inline void -ieee80211_crypto_resetkey(struct ieee80211vap *vap, struct ieee80211_key *k, - ieee80211_keyix_t ix) -{ - k->wk_cipher = &ieee80211_cipher_none;; - k->wk_private = k->wk_cipher->ic_attach(vap, k); - k->wk_keyix = ix; - k->wk_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV; -} - -/* - * Crypto-related notification methods. - */ -void ieee80211_notify_replay_failure(struct ieee80211vap *, - const struct ieee80211_frame *, const struct ieee80211_key *, - u_int64_t rsc); -void ieee80211_notify_michael_failure(struct ieee80211vap *, - const struct ieee80211_frame *, ieee80211_keyix_t keyix); -#endif /* defined(__KERNEL__) || defined(_KERNEL) */ -#endif /* _NET80211_IEEE80211_CRYPTO_H_ */ diff --git a/package/hostapd/madwifi/net80211/ieee80211_ioctl.h b/package/hostapd/madwifi/net80211/ieee80211_ioctl.h deleted file mode 100644 index 204303b..0000000 --- a/package/hostapd/madwifi/net80211/ieee80211_ioctl.h +++ /dev/null @@ -1,715 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211_ioctl.h 3314 2008-01-30 23:50:16Z mtaylor $ - */ -#ifndef _NET80211_IEEE80211_IOCTL_H_ -#define _NET80211_IEEE80211_IOCTL_H_ - -/* - * IEEE 802.11 ioctls. - */ -#include -#include -#include - -/* - * Per/node (station) statistics available when operating as an AP. - */ -struct ieee80211_nodestats { - u_int32_t ns_rx_data; /* rx data frames */ - u_int32_t ns_rx_mgmt; /* rx management frames */ - u_int32_t ns_rx_ctrl; /* rx control frames */ - u_int32_t ns_rx_ucast; /* rx unicast frames */ - u_int32_t ns_rx_mcast; /* rx multi/broadcast frames */ - u_int64_t ns_rx_bytes; /* rx data count (bytes) */ - u_int64_t ns_rx_beacons; /* rx beacon frames */ - u_int32_t ns_rx_proberesp; /* rx probe response frames */ - - u_int32_t ns_rx_dup; /* rx discard because it's a dup */ - u_int32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */ - u_int32_t ns_rx_wepfail; /* rx wep processing failed */ - u_int32_t ns_rx_demicfail; /* rx demic failed */ - u_int32_t ns_rx_decap; /* rx decapsulation failed */ - u_int32_t ns_rx_defrag; /* rx defragmentation failed */ - u_int32_t ns_rx_disassoc; /* rx disassociation */ - u_int32_t ns_rx_deauth; /* rx deauthentication */ - u_int32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */ - u_int32_t ns_rx_unauth; /* rx on unauthorized port */ - u_int32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */ - - u_int32_t ns_tx_data; /* tx data frames */ - u_int32_t ns_tx_mgmt; /* tx management frames */ - u_int32_t ns_tx_ucast; /* tx unicast frames */ - u_int32_t ns_tx_mcast; /* tx multi/broadcast frames */ - u_int64_t ns_tx_bytes; /* tx data count (bytes) */ - u_int32_t ns_tx_probereq; /* tx probe request frames */ - u_int32_t ns_tx_uapsd; /* tx on uapsd queue */ - - u_int32_t ns_tx_novlantag; /* tx discard due to no tag */ - u_int32_t ns_tx_vlanmismatch; /* tx discard due to of bad tag */ - - u_int32_t ns_tx_eosplost; /* uapsd EOSP retried out */ - - u_int32_t ns_ps_discard; /* ps discard due to of age */ - - u_int32_t ns_uapsd_triggers; /* uapsd triggers */ - - /* MIB-related state */ - u_int32_t ns_tx_assoc; /* [re]associations */ - u_int32_t ns_tx_assoc_fail; /* [re]association failures */ - u_int32_t ns_tx_auth; /* [re]authentications */ - u_int32_t ns_tx_auth_fail; /* [re]authentication failures*/ - u_int32_t ns_tx_deauth; /* deauthentications */ - u_int32_t ns_tx_deauth_code; /* last deauth reason */ - u_int32_t ns_tx_disassoc; /* disassociations */ - u_int32_t ns_tx_disassoc_code; /* last disassociation reason */ - u_int32_t ns_psq_drops; /* power save queue drops */ -}; - -/* - * Summary statistics. - */ -struct ieee80211_stats { - u_int32_t is_rx_badversion; /* rx frame with bad version */ - u_int32_t is_rx_tooshort; /* rx frame too short */ - u_int32_t is_rx_wrongbss; /* rx from wrong bssid */ - u_int32_t is_rx_dup; /* rx discard due to it's a dup */ - u_int32_t is_rx_wrongdir; /* rx w/ wrong direction */ - u_int32_t is_rx_mcastecho; /* rx discard due to of mcast echo */ - u_int32_t is_rx_mcastdisabled; /* rx discard due to of mcast disabled */ - u_int32_t is_rx_notassoc; /* rx discard due to sta !assoc */ - u_int32_t is_rx_noprivacy; /* rx w/ wep but privacy off */ - u_int32_t is_rx_unencrypted; /* rx w/o wep and privacy on */ - u_int32_t is_rx_wepfail; /* rx wep processing failed */ - u_int32_t is_rx_decap; /* rx decapsulation failed */ - u_int32_t is_rx_mgtdiscard; /* rx discard mgt frames */ - u_int32_t is_rx_ctl; /* rx discard ctrl frames */ - u_int32_t is_rx_beacon; /* rx beacon frames */ - u_int32_t is_rx_rstoobig; /* rx rate set truncated */ - u_int32_t is_rx_elem_missing; /* rx required element missing*/ - u_int32_t is_rx_elem_toobig; /* rx element too big */ - u_int32_t is_rx_elem_toosmall; /* rx element too small */ - u_int32_t is_rx_elem_unknown; /* rx element unknown */ - u_int32_t is_rx_badchan; /* rx frame w/ invalid chan */ - u_int32_t is_rx_chanmismatch; /* rx frame chan mismatch */ - u_int32_t is_rx_nodealloc; /* rx frame dropped */ - u_int32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */ - u_int32_t is_rx_auth_unsupported;/* rx w/ unsupported auth alg */ - u_int32_t is_rx_auth_fail; /* rx sta auth failure */ - u_int32_t is_rx_auth_countermeasures;/* rx auth discard due to CM */ - u_int32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */ - u_int32_t is_rx_assoc_notauth; /* rx assoc w/o auth */ - u_int32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */ - u_int32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */ - u_int32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */ - u_int32_t is_rx_assoc_badscie; /* rx assoc w/ bad SC IE */ - u_int32_t is_rx_deauth; /* rx deauthentication */ - u_int32_t is_rx_disassoc; /* rx disassociation */ - u_int32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/ - u_int32_t is_rx_nobuf; /* rx failed for lack of buf */ - u_int32_t is_rx_decryptcrc; /* rx decrypt failed on crc */ - u_int32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/ - u_int32_t is_rx_bad_auth; /* rx bad auth request */ - u_int32_t is_rx_unauth; /* rx on unauthorized port */ - u_int32_t is_rx_badkeyid; /* rx w/ incorrect keyid */ - u_int32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */ - u_int32_t is_rx_ccmpformat; /* rx format bad (CCMP) */ - u_int32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */ - u_int32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */ - u_int32_t is_rx_tkipformat; /* rx format bad (TKIP) */ - u_int32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */ - u_int32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */ - u_int32_t is_rx_badcipher; /* rx failed due to of key type */ - u_int32_t is_rx_nocipherctx; /* rx failed due to key !setup */ - u_int32_t is_rx_acl; /* rx discard due to of acl policy */ - u_int32_t is_rx_ffcnt; /* rx fast frames */ - u_int32_t is_rx_badathtnl; /* driver key alloc failed */ - u_int32_t is_tx_nobuf; /* tx failed for lack of buf */ - u_int32_t is_tx_nonode; /* tx failed for no node */ - u_int32_t is_tx_unknownmgt; /* tx of unknown mgt frame */ - u_int32_t is_tx_badcipher; /* tx failed due to of key type */ - u_int32_t is_tx_nodefkey; /* tx failed due to no defkey */ - u_int32_t is_tx_noheadroom; /* tx failed due to no space */ - u_int32_t is_tx_ffokcnt; /* tx fast frames sent success */ - u_int32_t is_tx_fferrcnt; /* tx fast frames sent success */ - u_int32_t is_scan_active; /* active scans started */ - u_int32_t is_scan_passive; /* passive scans started */ - u_int32_t is_node_timeout; /* nodes timed out inactivity */ - u_int32_t is_node_fdisassoc; /* forced node disassociation */ - u_int32_t is_crypto_nomem; /* no memory for crypto ctx */ - u_int32_t is_crypto_tkip; /* tkip crypto done in s/w */ - u_int32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */ - u_int32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */ - u_int32_t is_crypto_tkipcm; /* tkip counter measures */ - u_int32_t is_crypto_ccmp; /* ccmp crypto done in s/w */ - u_int32_t is_crypto_wep; /* wep crypto done in s/w */ - u_int32_t is_crypto_setkey_cipher;/* cipher rejected key */ - u_int32_t is_crypto_setkey_nokey;/* no key index for setkey */ - u_int32_t is_crypto_delkey; /* driver key delete failed */ - u_int32_t is_crypto_badcipher; /* unknown cipher */ - u_int32_t is_crypto_nocipher; /* cipher not available */ - u_int32_t is_crypto_attachfail; /* cipher attach failed */ - u_int32_t is_crypto_swfallback; /* cipher fallback to s/w */ - u_int32_t is_crypto_keyfail; /* driver key alloc failed */ - u_int32_t is_crypto_enmicfail; /* en-MIC failed */ - u_int32_t is_ibss_capmismatch; /* merge failed-cap mismatch */ - u_int32_t is_ibss_norate; /* merge failed-rate mismatch */ - u_int32_t is_ps_unassoc; /* ps-poll for unassoc. sta */ - u_int32_t is_ps_badaid; /* ps-poll w/ incorrect aid */ - u_int32_t is_ps_qempty; /* ps-poll w/ nothing to send */ -}; - -/* - * Max size of optional information elements. We artificially - * constrain this; it's limited only by the max frame size (and - * the max parameter size of the wireless extensions). - */ -#define IEEE80211_MAX_OPT_IE 256 - -/* - * WPA/RSN get/set key request. Specify the key/cipher - * type and whether the key is to be used for sending and/or - * receiving. The key index should be set only when working - * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). - * Otherwise a unicast/pairwise key is specified by the bssid - * (on a station) or mac address (on an ap). They key length - * must include any MIC key data; otherwise it should be no - more than IEEE80211_KEYBUF_SIZE. - */ -struct ieee80211req_key { - u_int8_t ik_type; /* key/cipher type */ - u_int8_t ik_pad; - ieee80211_keyix_t ik_keyix; /* key index */ - u_int8_t ik_keylen; /* key length in bytes */ - u_int8_t ik_flags; -/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */ -#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ - u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; - u_int64_t ik_keyrsc; /* key receive sequence counter */ - u_int64_t ik_keytsc; /* key transmit sequence counter */ - u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -}; - -/* - * Delete a key either by index or address. Set the index - * to IEEE80211_KEYIX_NONE when deleting a unicast key. - */ -struct ieee80211req_del_key { - /* NB: This is different to ieee80211_keyix_t, but this is OK as - * values are unique over the low order bits. */ - u_int8_t idk_keyix; /* key index */ - u_int8_t idk_macaddr[IEEE80211_ADDR_LEN]; -}; - -/* - * MLME state manipulation request. IEEE80211_MLME_ASSOC - * only makes sense when operating as a station. The other - * requests can be used when operating as a station or an - * ap (to effect a station). - */ -struct ieee80211req_mlme { - u_int8_t im_op; /* operation to perform */ -#define IEEE80211_MLME_ASSOC 1 /* associate station */ -#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ -#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ -#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ -#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ -#define IEEE80211_MLME_CLEAR_STATS 6 /* clear station statistic */ - u_int8_t im_ssid_len; /* length of optional ssid */ - u_int16_t im_reason; /* 802.11 reason code */ - u_int8_t im_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t im_ssid[IEEE80211_NWID_LEN]; -}; - -/* - * MAC ACL operations. - */ -enum { - IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACLs */ - IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */ - IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */ - IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */ - IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */ -}; - -/* - * Set the active channel list. Note this list is - * intersected with the available channel list in - * calculating the set of channels actually used in - * scanning. - */ -struct ieee80211req_chanlist { - u_int8_t ic_channels[IEEE80211_CHAN_BYTES]; -}; - -/* - * Get the active channel list info. - */ -struct ieee80211req_chaninfo { - u_int ic_nchans; - struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX]; -}; - -/* - * Retrieve the WPA/RSN information element for an associated station. - */ -struct ieee80211req_wpaie { - u_int8_t wpa_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t wpa_ie[IEEE80211_MAX_OPT_IE]; - u_int8_t rsn_ie[IEEE80211_MAX_OPT_IE]; -}; - -/* - * Retrieve per-node statistics. - */ -struct ieee80211req_sta_stats { - union { - /* NB: explicitly force 64-bit alignment */ - u_int8_t macaddr[IEEE80211_ADDR_LEN]; - u_int64_t pad; - } is_u; - struct ieee80211_nodestats is_stats; -}; - -/* - * Station information block; the mac address is used - * to retrieve other data like stats, unicast key, etc. - */ -struct ieee80211req_sta_info { - u_int16_t isi_len; /* length (mult of 4) */ - u_int16_t isi_freq; /* MHz */ - u_int16_t isi_flags; /* channel flags */ - u_int16_t isi_state; /* state flags */ - u_int8_t isi_authmode; /* authentication algorithm */ - u_int8_t isi_rssi; - int8_t isi_noise; - u_int16_t isi_capinfo; /* capabilities */ - u_int8_t isi_athflags; /* Atheros capabilities */ - u_int8_t isi_erp; /* ERP element */ - u_int8_t isi_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t isi_nrates; /* negotiated rates */ - u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isi_txrate; /* index to isi_rates[] */ - u_int16_t isi_ie_len; /* IE length */ - u_int16_t isi_associd; /* assoc response */ - u_int16_t isi_txpower; /* current tx power */ - u_int16_t isi_vlan; /* vlan tag */ - u_int16_t isi_txseqs[17]; /* seq to be transmitted */ - u_int16_t isi_rxseqs[17]; /* seq previous for qos frames*/ - u_int16_t isi_inact; /* inactivity timer */ - u_int8_t isi_uapsd; /* UAPSD queues */ - u_int8_t isi_opmode; /* sta operating mode */ - - /* XXX frag state? */ - /* variable length IE data */ -}; - -enum { - IEEE80211_STA_OPMODE_NORMAL, - IEEE80211_STA_OPMODE_XR -}; - -/* - * Retrieve per-station information; to retrieve all - * specify a mac address of ff:ff:ff:ff:ff:ff. - */ -struct ieee80211req_sta_req { - union { - /* NB: explicitly force 64-bit alignment */ - u_int8_t macaddr[IEEE80211_ADDR_LEN]; - u_int64_t pad; - } is_u; - struct ieee80211req_sta_info info[1]; /* variable length */ -}; - -/* - * Get/set per-station tx power cap. - */ -struct ieee80211req_sta_txpow { - u_int8_t it_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t it_txpow; -}; - -/* - * WME parameters are set and return using i_val and i_len. - * i_val holds the value itself. i_len specifies the AC - * and, as appropriate, then high bit specifies whether the - * operation is to be applied to the BSS or ourself. - */ -#define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */ -#define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */ -#define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */ - -/* - * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. - */ -struct ieee80211req_scan_result { - u_int16_t isr_len; /* length (mult of 4) */ - u_int16_t isr_freq; /* MHz */ - u_int16_t isr_flags; /* channel flags */ - u_int8_t isr_noise; - u_int8_t isr_rssi; - u_int8_t isr_intval; /* beacon interval */ - u_int16_t isr_capinfo; /* capabilities */ - u_int8_t isr_erp; /* ERP element */ - u_int8_t isr_bssid[IEEE80211_ADDR_LEN]; - u_int8_t isr_nrates; - u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isr_ssid_len; /* SSID length */ - u_int8_t isr_ie_len; /* IE length */ - u_int8_t isr_pad[5]; - /* variable length SSID followed by IE data */ -}; - -#ifdef __FreeBSD__ -/* - * FreeBSD-style ioctls. - */ -/* the first member must be matched with struct ifreq */ -struct ieee80211req { - char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */ - u_int16_t i_type; /* req type */ - int16_t i_val; /* Index or simple value */ - int16_t i_len; /* Index or simple value */ - void *i_data; /* Extra data */ -}; -#define SIOCS80211 _IOW('i', 234, struct ieee80211req) -#define SIOCG80211 _IOWR('i', 235, struct ieee80211req) -#define SIOCG80211STATS _IOWR('i', 236, struct ifreq) -#define SIOC80211IFCREATE _IOWR('i', 237, struct ifreq) -#define SIOC80211IFDESTROY _IOW('i', 238, struct ifreq) - -#define IEEE80211_IOC_SSID 1 -#define IEEE80211_IOC_NUMSSIDS 2 -#define IEEE80211_IOC_WEP 3 -#define IEEE80211_WEP_NOSUP -1 -#define IEEE80211_WEP_OFF 0 -#define IEEE80211_WEP_ON 1 -#define IEEE80211_WEP_MIXED 2 -#define IEEE80211_IOC_WEPKEY 4 -#define IEEE80211_IOC_NUMWEPKEYS 5 -#define IEEE80211_IOC_WEPTXKEY 6 -#define IEEE80211_IOC_AUTHMODE 7 -#define IEEE80211_IOC_STATIONNAME 8 -#define IEEE80211_IOC_CHANNEL 9 -#define IEEE80211_IOC_POWERSAVE 10 -#define IEEE80211_POWERSAVE_NOSUP -1 -#define IEEE80211_POWERSAVE_OFF 0 -#define IEEE80211_POWERSAVE_CAM 1 -#define IEEE80211_POWERSAVE_PSP 2 -#define IEEE80211_POWERSAVE_PSP_CAM 3 -#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM -#define IEEE80211_IOC_POWERSAVESLEEP 11 -#define IEEE80211_IOC_RTSTHRESHOLD 12 -#define IEEE80211_IOC_PROTMODE 13 -#define IEEE80211_PROTMODE_OFF 0 -#define IEEE80211_PROTMODE_CTS 1 -#define IEEE80211_PROTMODE_RTSCTS 2 -#define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */ -#define IEEE80211_IOC_BSSID 15 -#define IEEE80211_IOC_ROAMING 16 /* roaming mode */ -#define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */ -#define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */ -#define IEEE80211_IOC_WPAKEY 19 -#define IEEE80211_IOC_DELKEY 20 -#define IEEE80211_IOC_MLME 21 -#define IEEE80211_IOC_OPTIE 22 /* optional info. element */ -#define IEEE80211_IOC_SCAN_REQ 23 -#define IEEE80211_IOC_SCAN_RESULTS 24 -#define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */ -#define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */ -#define IEEE80211_IOC_CHANLIST 27 /* channel list */ -#define IEEE80211_IOC_WME 28 /* WME mode (on, off) */ -#define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */ -#define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */ -#define IEEE80211_IOC_MCASTCIPHER 31 /* multicast/default cipher */ -#define IEEE80211_IOC_MCASTKEYLEN 32 /* multicast key length */ -#define IEEE80211_IOC_UCASTCIPHERS 33 /* unicast cipher suites */ -#define IEEE80211_IOC_UCASTCIPHER 34 /* unicast cipher */ -#define IEEE80211_IOC_UCASTKEYLEN 35 /* unicast key length */ -#define IEEE80211_IOC_DRIVER_CAPS 36 /* driver capabilities */ -#define IEEE80211_IOC_KEYMGTALGS 37 /* key management algorithms */ -#define IEEE80211_IOC_RSNCAPS 38 /* RSN capabilities */ -#define IEEE80211_IOC_WPAIE 39 /* WPA information element */ -#define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */ -#define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */ -#define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */ -#define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */ -#define IEEE80211_IOC_STA_INFO 45 /* station/neighbor info */ -#define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */ -#define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */ -#define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */ -#define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */ -#define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */ -#define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/ -#define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */ -#define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */ -#define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */ -#define IEEE80211_IOC_SETMAC 55 /* set interface wds mac addr */ -#define IEEE80211_IOC_FF 56 /* ATH fast frames (on, off) */ -#define IEEE80211_IOC_TURBOP 57 /* ATH turbo' (on, off) */ -#define IEEE80211_IOC_APPIEBUF 58 /* IE in the management frame */ -#define IEEE80211_IOC_FILTERFRAME 59 /* management frame filter */ - -/* - * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. - */ -struct ieee80211req_scan_result { - u_int16_t isr_len; /* length (mult of 4) */ - u_int16_t isr_freq; /* MHz */ - u_int16_t isr_flags; /* channel flags */ - u_int8_t isr_noise; - u_int8_t isr_rssi; - u_int8_t isr_intval; /* beacon interval */ - u_int16_t isr_capinfo; /* capabilities */ - u_int8_t isr_erp; /* ERP element */ - u_int8_t isr_bssid[IEEE80211_ADDR_LEN]; - u_int8_t isr_nrates; - u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isr_ssid_len; /* SSID length */ - u_int8_t isr_ie_len; /* IE length */ - u_int8_t isr_pad[5]; - /* variable length SSID followed by IE data */ -}; - -#endif /* __FreeBSD__ */ - -#ifdef __linux__ -/* - * Wireless Extensions API, private ioctl interfaces. - * - * NB: Even-numbered ioctl numbers have set semantics and are privileged! - * (regardless of the incorrect comment in wireless.h!) - */ -#ifdef __KERNEL__ -#include -#endif -/* The maximum size of a iwpriv structure is IW_PRIV_SIZE_MASK, which was - * exceeded for some time by chaninfo ioctl. These macros change the size - * encoding for anything larger than IW_PRIV_SIZE_MASK from bytes to 4-byte - * multiples so that the padded size fits under IW_PRIV_SIZE_MASK. */ -#define IW_PRIV_BLOB_LENGTH_ENCODING(_SIZE) \ - (((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \ - (_SIZE) : \ - (((_SIZE) / sizeof(uint32_t)) + \ - (((_SIZE) == (((_SIZE) / sizeof(uint32_t)) * sizeof(int))) ? \ - 0 : 1))) -#define IW_PRIV_BLOB_TYPE_ENCODING(_SIZE) \ - (((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \ - (IW_PRIV_TYPE_BYTE | (_SIZE)) : \ - (IW_PRIV_TYPE_INT | IW_PRIV_BLOB_LENGTH_ENCODING((_SIZE)))) - -#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) -#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) -#define IEEE80211_IOCTL_SETMODE (SIOCIWFIRSTPRIV+2) -#define IEEE80211_IOCTL_GETMODE (SIOCIWFIRSTPRIV+3) -#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+4) -#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5) -#define IEEE80211_IOCTL_SETCHANLIST (SIOCIWFIRSTPRIV+6) -#define IEEE80211_IOCTL_GETCHANLIST (SIOCIWFIRSTPRIV+7) -#define IEEE80211_IOCTL_CHANSWITCH (SIOCIWFIRSTPRIV+8) -#define IEEE80211_IOCTL_GET_APPIEBUF (SIOCIWFIRSTPRIV+9) -#define IEEE80211_IOCTL_SET_APPIEBUF (SIOCIWFIRSTPRIV+10) -#define IEEE80211_IOCTL_READREG (SIOCIWFIRSTPRIV+11) -#define IEEE80211_IOCTL_FILTERFRAME (SIOCIWFIRSTPRIV+12) -#define IEEE80211_IOCTL_GETCHANINFO (SIOCIWFIRSTPRIV+13) -#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+14) -#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+15) -#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+16) -#define IEEE80211_IOCTL_RADAR (SIOCIWFIRSTPRIV+17) -#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+18) -#define IEEE80211_IOCTL_WRITEREG (SIOCIWFIRSTPRIV+19) -#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+20) -#define IEEE80211_IOCTL_HALMAP (SIOCIWFIRSTPRIV+21) -#define IEEE80211_IOCTL_ADDMAC (SIOCIWFIRSTPRIV+22) -#define IEEE80211_IOCTL_DELMAC (SIOCIWFIRSTPRIV+24) -#define IEEE80211_IOCTL_WDSADDMAC (SIOCIWFIRSTPRIV+25) -#define IEEE80211_IOCTL_WDSSETMAC (SIOCIWFIRSTPRIV+26) -#define IEEE80211_IOCTL_KICKMAC (SIOCIWFIRSTPRIV+30) -#define IEEE80211_IOCTL_SETSCANLIST (SIOCIWFIRSTPRIV+31) - -enum { - IEEE80211_WMMPARAMS_CWMIN = 1, - IEEE80211_WMMPARAMS_CWMAX = 2, - IEEE80211_WMMPARAMS_AIFS = 3, - IEEE80211_WMMPARAMS_TXOPLIMIT = 4, - IEEE80211_WMMPARAMS_ACM = 5, - IEEE80211_WMMPARAMS_NOACKPOLICY = 6, -}; -enum { - IEEE80211_PARAM_TURBO = 1, /* turbo mode */ - IEEE80211_PARAM_MODE = 2, /* phy mode (11a, 11b, etc.) */ - IEEE80211_PARAM_AUTHMODE = 3, /* authentication mode */ - IEEE80211_PARAM_PROTMODE = 4, /* 802.11g protection */ - IEEE80211_PARAM_MCASTCIPHER = 5, /* multicast/default cipher */ - IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ - IEEE80211_PARAM_UCASTCIPHERS = 7, /* unicast cipher suites */ - IEEE80211_PARAM_UCASTCIPHER = 8, /* unicast cipher */ - IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */ - IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ - IEEE80211_PARAM_ROAMING = 12, /* roaming mode */ - IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */ - IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */ - IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */ - IEEE80211_PARAM_DRIVER_CAPS = 16, /* driver capabilities */ - IEEE80211_PARAM_MACCMD = 17, /* MAC ACL operation */ - IEEE80211_PARAM_WMM = 18, /* WMM mode (on, off) */ - IEEE80211_PARAM_HIDESSID = 19, /* hide SSID mode (on, off) */ - IEEE80211_PARAM_APBRIDGE = 20, /* AP inter-sta bridging */ - IEEE80211_PARAM_KEYMGTALGS = 21, /* key management algorithms */ - IEEE80211_PARAM_RSNCAPS = 22, /* RSN capabilities */ - IEEE80211_PARAM_INACT = 23, /* station inactivity timeout */ - IEEE80211_PARAM_INACT_AUTH = 24, /* station auth inact timeout */ - IEEE80211_PARAM_INACT_INIT = 25, /* station init inact timeout */ - IEEE80211_PARAM_ABOLT = 26, /* Atheros Adv. Capabilities */ - IEEE80211_PARAM_INACT_TICK = 27, /* station inactivity timer tick (seconds) */ - IEEE80211_PARAM_DTIM_PERIOD = 28, /* DTIM period (beacons) */ - IEEE80211_PARAM_BEACON_INTERVAL = 29, /* beacon interval (ms) */ - IEEE80211_PARAM_DOTH = 30, /* 11.h is on/off */ - IEEE80211_PARAM_PWRTARGET = 31, /* Current Channel Pwr Constraint */ - IEEE80211_PARAM_GENREASSOC = 32, /* Generate a reassociation request */ - IEEE80211_PARAM_COMPRESSION = 33, /* compression */ - IEEE80211_PARAM_FF = 34, /* fast frames support */ - IEEE80211_PARAM_XR = 35, /* XR support */ - IEEE80211_PARAM_BURST = 36, /* burst mode */ - IEEE80211_PARAM_PUREG = 37, /* pure 11g (no 11b stations) */ - IEEE80211_PARAM_AR = 38, /* AR support */ - IEEE80211_PARAM_WDS = 39, /* Enable 4 address processing */ - IEEE80211_PARAM_BGSCAN = 40, /* bg scanning (on, off) */ - IEEE80211_PARAM_BGSCAN_IDLE = 41, /* bg scan idle threshold */ - IEEE80211_PARAM_BGSCAN_INTERVAL = 42, /* bg scan interval */ - IEEE80211_PARAM_MCAST_RATE = 43, /* Multicast Tx Rate */ - IEEE80211_PARAM_COVERAGE_CLASS = 44, /* coverage class */ - IEEE80211_PARAM_COUNTRY_IE = 45, /* enable country IE */ - IEEE80211_PARAM_SCANVALID = 46, /* scan cache valid threshold */ - IEEE80211_PARAM_ROAM_RSSI_11A = 47, /* rssi threshold in 11a */ - IEEE80211_PARAM_ROAM_RSSI_11B = 48, /* rssi threshold in 11b */ - IEEE80211_PARAM_ROAM_RSSI_11G = 49, /* rssi threshold in 11g */ - IEEE80211_PARAM_ROAM_RATE_11A = 50, /* tx rate threshold in 11a */ - IEEE80211_PARAM_ROAM_RATE_11B = 51, /* tx rate threshold in 11b */ - IEEE80211_PARAM_ROAM_RATE_11G = 52, /* tx rate threshold in 11g */ - IEEE80211_PARAM_UAPSDINFO = 53, /* value for qos info field */ - IEEE80211_PARAM_SLEEP = 54, /* force sleep/wake */ - IEEE80211_PARAM_QOSNULL = 55, /* force sleep/wake */ - IEEE80211_PARAM_PSPOLL = 56, /* force ps-poll generation (sta only) */ - IEEE80211_PARAM_EOSPDROP = 57, /* force uapsd EOSP drop (ap only) */ - IEEE80211_PARAM_MARKDFS = 58, /* mark a dfs interference channel when found */ - IEEE80211_PARAM_REGCLASS = 59, /* enable regclass ids in country IE */ - IEEE80211_PARAM_DROPUNENC_EAPOL = 60, /* drop unencrypted eapol frames */ - IEEE80211_PARAM_SHPREAMBLE = 61, /* Short Preamble */ - IEEE80211_PARAM_DUMPREGS = 62, /* Pretty printed dump of Atheros hardware registers */ - IEEE80211_PARAM_DOTH_ALGORITHM = 63, /* spectrum management algorithm */ - IEEE80211_PARAM_DOTH_MINCOM = 64, /* minimum number of common channels */ - IEEE80211_PARAM_DOTH_SLCG = 65, /* permil of Stations Lost per Channel Gained */ - IEEE80211_PARAM_DOTH_SLDG = 66, /* permil of Stations Lost per rssi Db Gained */ - IEEE80211_PARAM_TXCONT = 67, /* continuous transmit mode (boolean) */ - IEEE80211_PARAM_TXCONT_RATE = 68, /* continuous transmit mode data rate (in mbit/sec) - will use closest match from current rate table */ - IEEE80211_PARAM_TXCONT_POWER = 69, /* power level in units of 0.5dBm */ - IEEE80211_PARAM_DFS_TESTMODE = 70, /* do not perform DFS actions (i.e. markng DFS and channel change on interference), just report them via debug. */ - IEEE80211_PARAM_DFS_CACTIME = 71, /* how long do we wait for chan availability - scans ? - FCC requires 60s, so that is the default. */ - IEEE80211_PARAM_DFS_EXCLPERIOD = 72, /* DFS no-occupancy limit - how long do we stay - off a channel once radar is detected? - FCC requires 30m, so that is the default. */ - IEEE80211_PARAM_BEACON_MISS_THRESH = 73, /* Beacon miss threshold (in beacons) */ - IEEE80211_PARAM_BEACON_MISS_THRESH_MS = 74, /* Beacon miss threshold (in ms) */ - IEEE80211_PARAM_MAXRATE = 75, /* Maximum rate (by table index) */ - IEEE80211_PARAM_MINRATE = 76, /* Minimum rate (by table index) */ - IEEE80211_PARAM_PROTMODE_RSSI = 77, /* RSSI Threshold for enabling protection mode */ - IEEE80211_PARAM_PROTMODE_TIMEOUT = 78, /* Timeout for expiring protection mode */ - IEEE80211_PARAM_BGSCAN_THRESH = 79, /* bg scan rssi threshold */ - IEEE80211_PARAM_RSSI_DIS_THR = 80, /* rssi threshold for disconnection */ - IEEE80211_PARAM_RSSI_DIS_COUNT = 81, /* counter for rssi threshold */ - IEEE80211_PARAM_WDS_SEP = 82, /* move wds stations into separate interfaces */ - IEEE80211_PARAM_MAXASSOC = 83, /* maximum associated stations */ - IEEE80211_PARAM_PROBEREQ = 84, /* enable handling of probe requests */ - IEEE80211_PARAM_BEACON_TXP = 85, /* set beacon tx power */ -}; - -#define SIOCG80211STATS (SIOCDEVPRIVATE+2) -/* NB: require in+out parameters so cannot use wireless extensions, yech */ -#define IEEE80211_IOCTL_GETKEY (SIOCDEVPRIVATE+3) -#define IEEE80211_IOCTL_GETWPAIE (SIOCDEVPRIVATE+4) -#define IEEE80211_IOCTL_STA_STATS (SIOCDEVPRIVATE+5) -#define IEEE80211_IOCTL_STA_INFO (SIOCDEVPRIVATE+6) -#define SIOC80211IFCREATE (SIOCDEVPRIVATE+7) -#define SIOC80211IFDESTROY (SIOCDEVPRIVATE+8) -#define IEEE80211_IOCTL_SCAN_RESULTS (SIOCDEVPRIVATE+9) - -struct ieee80211_clone_params { - char icp_name[IFNAMSIZ]; /* device name */ - u_int16_t icp_opmode; /* operating mode */ - u_int16_t icp_flags; /* see below */ -#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */ -#define IEEE80211_NO_STABEACONS 0x0002 /* Do not setup the station beacon timers */ -}; - -/* APPIEBUF related definitions */ - -/* Management frame type to which application IE is added */ -enum { - IEEE80211_APPIE_FRAME_BEACON = 0, - IEEE80211_APPIE_FRAME_PROBE_REQ = 1, - IEEE80211_APPIE_FRAME_PROBE_RESP = 2, - IEEE80211_APPIE_FRAME_ASSOC_REQ = 3, - IEEE80211_APPIE_FRAME_ASSOC_RESP = 4, - IEEE80211_APPIE_NUM_OF_FRAME = 5 -}; - -struct ieee80211req_getset_appiebuf { - u_int32_t app_frmtype; /* management frame type for which buffer is added */ - u_int32_t app_buflen; /* application-supplied buffer length */ - u_int8_t app_buf[0]; /* application-supplied IE(s) */ -}; - -/* Flags ORed by application to set filter for receiving management frames */ -enum { - IEEE80211_FILTER_TYPE_BEACON = 1<<0, - IEEE80211_FILTER_TYPE_PROBE_REQ = 1<<1, - IEEE80211_FILTER_TYPE_PROBE_RESP = 1<<2, - IEEE80211_FILTER_TYPE_ASSOC_REQ = 1<<3, - IEEE80211_FILTER_TYPE_ASSOC_RESP = 1<<4, - IEEE80211_FILTER_TYPE_AUTH = 1<<5, - IEEE80211_FILTER_TYPE_DEAUTH = 1<<6, - IEEE80211_FILTER_TYPE_DISASSOC = 1<<7, - IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */ -}; - -struct ieee80211req_set_filter { - u_int32_t app_filterype; /* management frame filter type */ -}; - - -#endif /* __linux__ */ - -#endif /* _NET80211_IEEE80211_IOCTL_H_ */ diff --git a/package/hostapd/patches/300-nl80211_multicall_fixes.patch b/package/hostapd/patches/300-nl80211_multicall_fixes.patch deleted file mode 100644 index be68ed1..0000000 --- a/package/hostapd/patches/300-nl80211_multicall_fixes.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -3290,6 +3290,7 @@ static void * wpa_driver_nl80211_init(vo - drv->monitor_sock = -1; - drv->eapol_tx_sock = -1; - drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; -+ drv->nlmode = NL80211_IFTYPE_STATION; - - if (wpa_driver_nl80211_init_nl(drv)) { - os_free(drv); -@@ -3607,17 +3608,12 @@ static void wpa_driver_nl80211_send_rfki - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } - -- - static int --wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) -+wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, -+ int *send_rfkill_event) - { - struct i802_bss *bss = &drv->first_bss; -- int send_rfkill_event = 0; - -- drv->ifindex = if_nametoindex(bss->ifname); -- drv->first_bss.ifindex = drv->ifindex; -- --#ifndef HOSTAPD - /* - * Make sure the interface starts up in station mode unless this is a - * dynamically added interface (e.g., P2P) that was already configured -@@ -3636,7 +3632,7 @@ wpa_driver_nl80211_finish_drv_init(struc - "interface '%s' due to rfkill", - bss->ifname); - drv->if_disabled = 1; -- send_rfkill_event = 1; -+ *send_rfkill_event = 1; - } else { - wpa_printf(MSG_ERROR, "nl80211: Could not set " - "interface '%s' UP", bss->ifname); -@@ -3646,7 +3642,19 @@ wpa_driver_nl80211_finish_drv_init(struc - - netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, - 1, IF_OPER_DORMANT); --#endif /* HOSTAPD */ -+} -+ -+static int -+wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) -+{ -+ struct i802_bss *bss = &drv->first_bss; -+ int send_rfkill_event = 0; -+ -+ drv->ifindex = if_nametoindex(bss->ifname); -+ drv->first_bss.ifindex = drv->ifindex; -+ -+ if (drv->nlmode == NL80211_IFTYPE_STATION) -+ wpa_driver_nl80211_finish_drv_init_sta(drv, &send_rfkill_event); - - if (wpa_driver_nl80211_capa(drv)) - return -1; diff --git a/package/hostapd/patches/310-multicall_bridge_fix.patch b/package/hostapd/patches/310-multicall_bridge_fix.patch deleted file mode 100644 index a80c041..0000000 --- a/package/hostapd/patches/310-multicall_bridge_fix.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -899,6 +899,10 @@ static void wpa_driver_nl80211_event_rtm - return; - } - -+ if (ifi->ifi_family == AF_BRIDGE && -+ drv->nlmode != NL80211_IFTYPE_AP) -+ return; -+ - wpa_printf(MSG_DEBUG, "RTM_NEWLINK: operstate=%d ifi_flags=0x%x " - "(%s%s%s%s)", - drv->operstate, ifi->ifi_flags, -@@ -1006,6 +1010,10 @@ static void wpa_driver_nl80211_event_rtm - attrlen = len; - attr = (struct rtattr *) buf; - -+ if (ifi->ifi_family == AF_BRIDGE && -+ drv->nlmode != NL80211_IFTYPE_AP) -+ return; -+ - rta_len = RTA_ALIGN(sizeof(struct rtattr)); - while (RTA_OK(attr, attrlen)) { - if (attr->rta_type == IFLA_IFNAME) { -@@ -3292,6 +3300,11 @@ static void * wpa_driver_nl80211_init(vo - drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; - drv->nlmode = NL80211_IFTYPE_STATION; - -+#ifdef HOSTAPD -+ drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); -+ drv->if_indices = drv->default_if_indices; -+#endif -+ - if (wpa_driver_nl80211_init_nl(drv)) { - os_free(drv); - return NULL; -@@ -8296,8 +8309,6 @@ static void *i802_init(struct hostapd_da - br_ifindex = 0; - } - -- drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); -- drv->if_indices = drv->default_if_indices; - for (i = 0; i < params->num_bridge; i++) { - if (params->bridge[i]) { - ifindex = if_nametoindex(params->bridge[i]); diff --git a/package/hostapd/patches/320-madwifi_key_fixes.patch b/package/hostapd/patches/320-madwifi_key_fixes.patch deleted file mode 100644 index 45a7ac6..0000000 --- a/package/hostapd/patches/320-madwifi_key_fixes.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/src/drivers/driver_madwifi.c -+++ b/src/drivers/driver_madwifi.c -@@ -453,7 +453,9 @@ wpa_driver_madwifi_set_key(const char *i - - memset(&wk, 0, sizeof(wk)); - wk.ik_type = cipher; -- wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT; -+ wk.ik_flags = IEEE80211_KEY_RECV; -+ if (set_tx) -+ wk.ik_flags |= IEEE80211_KEY_XMIT; - if (addr == NULL || is_broadcast_ether_addr(addr)) { - memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN); - wk.ik_keyix = key_idx; -@@ -465,6 +467,20 @@ wpa_driver_madwifi_set_key(const char *i - wk.ik_keylen = key_len; - memcpy(wk.ik_keydata, key, key_len); - -+#ifdef WORDS_BIGENDIAN -+#define WPA_KEY_RSC_LEN 8 -+ { -+ size_t i; -+ u8 tmp[WPA_KEY_RSC_LEN]; -+ os_memset(tmp, 0, sizeof(tmp)); -+ for (i = 0; i < seq_len; i++) -+ tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i]; -+ os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN); -+ } -+#else /* WORDS_BIGENDIAN */ -+ os_memcpy(&wk.ik_keyrsc, seq, seq_len); -+#endif /* WORDS_BIGENDIAN */ -+ - ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk)); - if (ret < 0) { - wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s" diff --git a/package/hostapd/patches/400-noscan.patch b/package/hostapd/patches/400-noscan.patch deleted file mode 100644 index 18a218c..0000000 --- a/package/hostapd/patches/400-noscan.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/hostapd/config_file.c -+++ b/hostapd/config_file.c -@@ -2464,6 +2464,8 @@ static int hostapd_config_fill(struct ho - } - #endif /* CONFIG_IEEE80211W */ - #ifdef CONFIG_IEEE80211N -+ } else if (os_strcmp(buf, "noscan") == 0) { -+ conf->noscan = atoi(pos); - } else if (os_strcmp(buf, "ieee80211n") == 0) { - conf->ieee80211n = atoi(pos); - } else if (os_strcmp(buf, "ht_capab") == 0) { ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -511,6 +511,7 @@ struct hostapd_config { - - int ht_op_mode_fixed; - u16 ht_capab; -+ int noscan; - int ieee80211n; - int secondary_channel; - int require_ht; ---- a/src/ap/hw_features.c -+++ b/src/ap/hw_features.c -@@ -494,7 +494,7 @@ static int ieee80211n_check_40mhz(struct - { - struct wpa_driver_scan_params params; - -- if (!iface->conf->secondary_channel) -+ if (!iface->conf->secondary_channel || iface->conf->noscan) - return 0; /* HT40 not used */ - - wpa_printf(MSG_DEBUG, "Scan for neighboring BSSes prior to enabling " diff --git a/package/hostapd/patches/410-multicall.patch b/package/hostapd/patches/410-multicall.patch deleted file mode 100644 index 723f5f6..0000000 --- a/package/hostapd/patches/410-multicall.patch +++ /dev/null @@ -1,246 +0,0 @@ ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils - # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include - - -include .config -+-include $(if $(MULTICALL), ../wpa_supplicant/.config) - - ifndef CONFIG_OS - ifdef CONFIG_NATIVE_WINDOWS -@@ -192,10 +193,14 @@ ifdef CONFIG_IEEE80211AC - CFLAGS += -DCONFIG_IEEE80211AC - endif - -+ifndef MULTICALL -+CFLAGS += -DNO_SUPPLICANT -+endif -+ - include ../src/drivers/drivers.mak --OBJS += $(DRV_AP_OBJS) --CFLAGS += $(DRV_AP_CFLAGS) --LDFLAGS += $(DRV_AP_LDFLAGS) -+OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS))) -+CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS)) -+LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS)) - LIBS += $(DRV_AP_LIBS) - - ifdef CONFIG_L2_PACKET -@@ -860,6 +865,12 @@ install: all - - BCHECK=../src/drivers/build.hostapd - -+hostapd_multi.a: $(BCHECK) $(OBJS) -+ $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c -+ @$(E) " CC " $< -+ @rm -f $@ -+ @$(AR) cr $@ hostapd_multi.o $(OBJS) -+ - hostapd: $(BCHECK) $(OBJS) - $(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS) - @$(E) " LD " $@ -@@ -898,6 +909,12 @@ HOBJS += ../src/crypto/aes-internal.o - HOBJS += ../src/crypto/aes-internal-enc.o - endif - -+dump_cflags: -+ @echo -n $(CFLAGS) " " -+ -+dump_ldflags: -+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " -+ - nt_password_hash: $(NOBJS) - $(Q)$(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n) - @$(E) " LD " $@ ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -14,6 +14,7 @@ CFLAGS += -I../src - CFLAGS += -I../src/utils - - -include .config -+-include $(if $(MULTICALL),../hostapd/.config) - - BINALL=wpa_supplicant wpa_cli - -@@ -708,6 +709,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS - CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS - LIBS += -ldl -rdynamic - endif -+else -+ ifdef MULTICALL -+ OBJS += ../src/eap_common/eap_common.o -+ endif - endif - - ifdef CONFIG_AP -@@ -716,9 +721,11 @@ NEED_EAP_COMMON=y - NEED_RSN_AUTHENTICATOR=y - CFLAGS += -DCONFIG_AP - OBJS += ap.o -+ifndef MULTICALL - CFLAGS += -DCONFIG_NO_RADIUS - CFLAGS += -DCONFIG_NO_ACCOUNTING - CFLAGS += -DCONFIG_NO_VLAN -+endif - OBJS += ../src/ap/hostapd.o - OBJS += ../src/ap/wpa_auth_glue.o - OBJS += ../src/ap/utils.o -@@ -773,10 +780,18 @@ endif - ifdef CONFIG_HS20 - OBJS += ../src/ap/hs20.o - endif -+else -+ ifdef MULTICALL -+ OBJS += ../src/eap_server/eap_server.o -+ OBJS += ../src/eap_server/eap_server_identity.o -+ OBJS += ../src/eap_server/eap_server_methods.o -+ endif - endif - - ifdef NEED_RSN_AUTHENTICATOR -+ifndef MULTICALL - CFLAGS += -DCONFIG_NO_RADIUS -+endif - NEED_AES_WRAP=y - OBJS += ../src/ap/wpa_auth.o - OBJS += ../src/ap/wpa_auth_ie.o -@@ -1525,6 +1540,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv) - - $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config - -+wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs) -+ $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c -+ @$(E) " CC " $< -+ @rm -f $@ -+ @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS) -+ - wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs) - $(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS) - @$(E) " LD " $@ -@@ -1595,6 +1616,12 @@ eap_ikev2.so: ../src/eap_peer/eap_ikev2. - %@.service: %.service.arg.in - sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@ - -+dump_cflags: -+ @echo -n $(CFLAGS) " " -+ -+dump_ldflags: -+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " -+ - wpa_supplicant.exe: wpa_supplicant - mv -f $< $@ - wpa_cli.exe: wpa_cli ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -3750,8 +3750,8 @@ union wpa_event_data { - * Driver wrapper code should call this function whenever an event is received - * from the driver. - */ --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data); -+extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); - - - /* ---- a/src/ap/drv_callbacks.c -+++ b/src/ap/drv_callbacks.c -@@ -714,8 +714,8 @@ static void hostapd_event_eapol_rx(struc - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+void hostapd_wpa_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct hostapd_data *hapd = ctx; - #ifndef CONFIG_NO_STDOUT_DEBUG ---- a/wpa_supplicant/wpa_priv.c -+++ b/wpa_supplicant/wpa_priv.c -@@ -819,8 +819,8 @@ static void wpa_priv_send_ft_response(st - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+static void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct wpa_priv_interface *iface = ctx; - -@@ -962,6 +962,7 @@ int main(int argc, char *argv[]) - if (os_program_init()) - return -1; - -+ wpa_supplicant_event = supplicant_event; - wpa_priv_fd_workaround(); - - for (;;) { ---- a/wpa_supplicant/events.c -+++ b/wpa_supplicant/events.c -@@ -2354,8 +2354,8 @@ static void wpa_supplicant_event_unprot_ - } - - --void wpa_supplicant_event(void *ctx, enum wpa_event_type event, -- union wpa_event_data *data) -+void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data) - { - struct wpa_supplicant *wpa_s = ctx; - u16 reason_code = 0; ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -3050,6 +3050,9 @@ static void wpa_supplicant_deinit_iface( - } - } - -+extern void supplicant_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); -+ - - /** - * wpa_supplicant_add_iface - Add a new network interface -@@ -3244,6 +3247,7 @@ struct wpa_global * wpa_supplicant_init( - wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb); - #endif /* CONFIG_NO_WPA_MSG */ - -+ wpa_supplicant_event = supplicant_event; - wpa_debug_open_file(params->wpa_debug_file_path); - if (params->wpa_debug_syslog) - wpa_debug_open_syslog(); ---- a/hostapd/main.c -+++ b/hostapd/main.c -@@ -554,6 +554,9 @@ static int hostapd_get_ctrl_iface_group( - return 0; - } - -+void hostapd_wpa_event(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); -+ - - int main(int argc, char *argv[]) - { -@@ -579,6 +582,7 @@ int main(int argc, char *argv[]) - interfaces.global_iface_name = NULL; - interfaces.global_ctrl_sock = -1; - -+ wpa_supplicant_event = hostapd_wpa_event; - for (;;) { - c = getopt(argc, argv, "Bde:f:hKP:tvg:G:"); - if (c < 0) ---- a/src/drivers/drivers.c -+++ b/src/drivers/drivers.c -@@ -7,7 +7,11 @@ - */ - - #include "includes.h" -+#include "common.h" -+#include "driver.h" - -+void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, -+ union wpa_event_data *data); - - #ifdef CONFIG_DRIVER_WEXT - extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ diff --git a/package/hostapd/patches/420-timestamp_check.patch b/package/hostapd/patches/420-timestamp_check.patch deleted file mode 100644 index b2d4a05..0000000 --- a/package/hostapd/patches/420-timestamp_check.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/src/tls/x509v3.c -+++ b/src/tls/x509v3.c -@@ -1848,6 +1848,9 @@ int x509_certificate_chain_validate(stru - if (chain_trusted) - continue; - -+#ifdef NO_TIMESTAMP_CHECK -+ disable_time_checks = 1; -+#endif - if (!disable_time_checks && - ((unsigned long) now.sec < - (unsigned long) cert->not_before || diff --git a/package/hostapd/patches/430-rescan_immediately.patch b/package/hostapd/patches/430-rescan_immediately.patch deleted file mode 100644 index 9d5fd32..0000000 --- a/package/hostapd/patches/430-rescan_immediately.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -2443,7 +2443,7 @@ static struct wpa_supplicant * wpa_suppl - if (wpa_s == NULL) - return NULL; - wpa_s->scan_req = INITIAL_SCAN_REQ; -- wpa_s->scan_interval = 5; -+ wpa_s->scan_interval = 1; - wpa_s->new_connection = 1; - wpa_s->parent = wpa_s; - wpa_s->sched_scanning = 0; diff --git a/package/hostapd/patches/440-optional_rfkill.patch b/package/hostapd/patches/440-optional_rfkill.patch deleted file mode 100644 index 8a006df..0000000 --- a/package/hostapd/patches/440-optional_rfkill.patch +++ /dev/null @@ -1,261 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -218,7 +218,9 @@ struct wpa_driver_nl80211_data { - int if_removed; - int if_disabled; - int ignore_if_down_event; -+#ifdef CONFIG_RFKILL - struct rfkill_data *rfkill; -+#endif - struct wpa_driver_capa capa; - u8 *extended_capa, *extended_capa_mask; - unsigned int extended_capa_len; -@@ -3128,7 +3130,7 @@ static int wpa_driver_nl80211_init_nl(st - return 0; - } - -- -+#ifdef CONFIG_RFKILL - static void wpa_driver_nl80211_rfkill_blocked(void *ctx) - { - wpa_printf(MSG_DEBUG, "nl80211: RFKILL blocked"); -@@ -3151,6 +3153,7 @@ static void wpa_driver_nl80211_rfkill_un - } - /* rtnetlink ifup handler will report interface as enabled */ - } -+#endif /* CONFIG_RFKILL */ - - - static void nl80211_get_phy_name(struct wpa_driver_nl80211_data *drv) -@@ -3279,7 +3282,9 @@ static void * wpa_driver_nl80211_init(vo - void *global_priv) - { - struct wpa_driver_nl80211_data *drv; -+#ifdef CONFIG_RFKILL - struct rfkill_config *rcfg; -+#endif - struct i802_bss *bss; - - if (global_priv == NULL) -@@ -3315,6 +3320,7 @@ static void * wpa_driver_nl80211_init(vo - - nl80211_get_phy_name(drv); - -+#ifdef CONFIG_RFKILL - rcfg = os_zalloc(sizeof(*rcfg)); - if (rcfg == NULL) - goto failed; -@@ -3327,6 +3333,7 @@ static void * wpa_driver_nl80211_init(vo - wpa_printf(MSG_DEBUG, "nl80211: RFKILL status not available"); - os_free(rcfg); - } -+#endif /* CONFIG_RFKILL */ - - if (wpa_driver_nl80211_finish_drv_init(drv)) - goto failed; -@@ -3616,10 +3623,12 @@ static void nl80211_mgmt_unsubscribe(str - } - - -+#ifdef CONFIG_RFKILL - static void wpa_driver_nl80211_send_rfkill(void *eloop_ctx, void *timeout_ctx) - { - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } -+#endif /* CONFIG_RFKILL */ - - static int - wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, -@@ -3640,13 +3649,16 @@ wpa_driver_nl80211_finish_drv_init_sta(s - } - - if (linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1)) { -+#ifdef CONFIG_RFKILL - if (rfkill_is_blocked(drv->rfkill)) { - wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable " - "interface '%s' due to rfkill", - bss->ifname); - drv->if_disabled = 1; - *send_rfkill_event = 1; -- } else { -+ } else -+#endif -+ { - wpa_printf(MSG_ERROR, "nl80211: Could not set " - "interface '%s' UP", bss->ifname); - return -1; -@@ -3677,8 +3689,10 @@ wpa_driver_nl80211_finish_drv_init(struc - return -1; - - if (send_rfkill_event) { -+#ifdef CONFIG_RFKILL - eloop_register_timeout(0, 0, wpa_driver_nl80211_send_rfkill, - drv, drv->ctx); -+#endif - } - - return 0; -@@ -3764,7 +3778,9 @@ static void wpa_driver_nl80211_deinit(st - - netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, 0, - IF_OPER_UP); -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - - eloop_cancel_timeout(wpa_driver_nl80211_scan_timeout, drv, drv->ctx); - ---- a/src/drivers/driver_wext.c -+++ b/src/drivers/driver_wext.c -@@ -742,7 +742,7 @@ static void wpa_driver_wext_event_rtm_de - } - } - -- -+#ifdef CONFIG_RFKILL - static void wpa_driver_wext_rfkill_blocked(void *ctx) - { - wpa_printf(MSG_DEBUG, "WEXT: RFKILL blocked"); -@@ -764,7 +764,7 @@ static void wpa_driver_wext_rfkill_unblo - } - /* rtnetlink ifup handler will report interface as enabled */ - } -- -+#endif /* CONFIG_RFKILL */ - - static void wext_get_phy_name(struct wpa_driver_wext_data *drv) - { -@@ -810,7 +810,9 @@ void * wpa_driver_wext_init(void *ctx, c - { - struct wpa_driver_wext_data *drv; - struct netlink_config *cfg; -+#ifdef CONFIG_RFKILL - struct rfkill_config *rcfg; -+#endif - char path[128]; - struct stat buf; - -@@ -845,6 +847,7 @@ void * wpa_driver_wext_init(void *ctx, c - goto err2; - } - -+#ifdef CONFIG_RFKILL - rcfg = os_zalloc(sizeof(*rcfg)); - if (rcfg == NULL) - goto err3; -@@ -857,6 +860,7 @@ void * wpa_driver_wext_init(void *ctx, c - wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available"); - os_free(rcfg); - } -+#endif /* CONFIG_RFKILL */ - - drv->mlme_sock = -1; - -@@ -874,7 +878,9 @@ void * wpa_driver_wext_init(void *ctx, c - return drv; - - err3: -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - netlink_deinit(drv->netlink); - err2: - close(drv->ioctl_sock); -@@ -884,10 +890,12 @@ err1: - } - - -+#ifdef CONFIG_RFKILL - static void wpa_driver_wext_send_rfkill(void *eloop_ctx, void *timeout_ctx) - { - wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); - } -+#endif /* CONFIG_RFKILL */ - - - static int wpa_driver_wext_finish_drv_init(struct wpa_driver_wext_data *drv) -@@ -895,13 +903,16 @@ static int wpa_driver_wext_finish_drv_in - int send_rfkill_event = 0; - - if (linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 1) < 0) { -+#ifdef CONFIG_RFKILL - if (rfkill_is_blocked(drv->rfkill)) { - wpa_printf(MSG_DEBUG, "WEXT: Could not yet enable " - "interface '%s' due to rfkill", - drv->ifname); - drv->if_disabled = 1; - send_rfkill_event = 1; -- } else { -+ } else -+#endif -+ { - wpa_printf(MSG_ERROR, "WEXT: Could not set " - "interface '%s' UP", drv->ifname); - return -1; -@@ -949,8 +960,10 @@ static int wpa_driver_wext_finish_drv_in - 1, IF_OPER_DORMANT); - - if (send_rfkill_event) { -+#ifdef CONFIG_RFKILL - eloop_register_timeout(0, 0, wpa_driver_wext_send_rfkill, - drv, drv->ctx); -+#endif - } - - return 0; -@@ -980,7 +993,9 @@ void wpa_driver_wext_deinit(void *priv) - - netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP); - netlink_deinit(drv->netlink); -+#ifdef CONFIG_RFKILL - rfkill_deinit(drv->rfkill); -+#endif - - if (drv->mlme_sock >= 0) - eloop_unregister_read_sock(drv->mlme_sock); ---- a/src/drivers/drivers.mak -+++ b/src/drivers/drivers.mak -@@ -25,7 +25,6 @@ NEED_SME=y - NEED_AP_MLME=y - NEED_NETLINK=y - NEED_LINUX_IOCTL=y --NEED_RFKILL=y - - ifdef CONFIG_LIBNL32 - DRV_LIBS += -lnl-3 -@@ -109,7 +108,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT - CONFIG_WIRELESS_EXTENSION=y - NEED_NETLINK=y - NEED_LINUX_IOCTL=y --NEED_RFKILL=y - endif - - ifdef CONFIG_DRIVER_NDIS -@@ -135,7 +133,6 @@ endif - ifdef CONFIG_WIRELESS_EXTENSION - DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION - DRV_WPA_OBJS += ../src/drivers/driver_wext.o --NEED_RFKILL=y - endif - - ifdef NEED_NETLINK -@@ -148,6 +145,7 @@ endif - - ifdef NEED_RFKILL - DRV_OBJS += ../src/drivers/rfkill.o -+DRV_WPA_CFLAGS += -DCONFIG_RFKILL - endif - - ifdef CONFIG_VLAN_NETLINK ---- a/src/drivers/driver_wext.h -+++ b/src/drivers/driver_wext.h -@@ -22,7 +22,9 @@ struct wpa_driver_wext_data { - int ifindex2; - int if_removed; - int if_disabled; -+#ifdef CONFIG_RFKILL - struct rfkill_data *rfkill; -+#endif - u8 *assoc_req_ies; - size_t assoc_req_ies_len; - u8 *assoc_resp_ies; diff --git a/package/hostapd/patches/450-reload_freq_change.patch b/package/hostapd/patches/450-reload_freq_change.patch deleted file mode 100644 index ffa757e..0000000 --- a/package/hostapd/patches/450-reload_freq_change.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -156,6 +156,24 @@ int hostapd_reload_config(struct hostapd - oldconf = hapd->iconf; - iface->conf = newconf; - -+ hostapd_select_hw_mode(iface); -+ iface->freq = hostapd_hw_get_freq(hapd, newconf->channel); -+ -+ if (hostapd_set_freq(hapd, newconf->hw_mode, iface->freq, -+ newconf->channel, -+ newconf->ieee80211n, -+ newconf->ieee80211ac, -+ newconf->secondary_channel, -+ newconf->vht_oper_chwidth, -+ newconf->vht_oper_centr_freq_seg0_idx, -+ newconf->vht_oper_centr_freq_seg1_idx)) { -+ wpa_printf(MSG_ERROR, "Could not set channel for " -+ "kernel driver"); -+ } -+ -+ if (iface->current_mode) -+ hostapd_prepare_rates(iface, iface->current_mode); -+ - for (j = 0; j < iface->num_bss; j++) { - hapd = iface->bss[j]; - hapd->iconf = newconf; diff --git a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch b/package/hostapd/patches/451-nl80211_del_beacon_bss.patch deleted file mode 100644 index fdff9e7..0000000 --- a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -3699,16 +3699,18 @@ wpa_driver_nl80211_finish_drv_init(struc - } - - --static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) -+static int wpa_driver_nl80211_del_bss_beacon(struct i802_bss *bss) - { -+ struct wpa_driver_nl80211_data *drv = bss->drv; - struct nl_msg *msg; - -+ bss->beacon_set = 0; - msg = nlmsg_alloc(); - if (!msg) - return -ENOMEM; - - nl80211_cmd(drv, msg, 0, NL80211_CMD_DEL_BEACON); -- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex); -+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, bss->ifindex); - - return send_and_recv_msgs(drv, msg, NULL, NULL); - nla_put_failure: -@@ -3716,6 +3718,21 @@ static int wpa_driver_nl80211_del_beacon - return -ENOBUFS; - } - -+static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) -+{ -+ struct i802_bss *bss; -+ -+ for (bss = &drv->first_bss; bss; bss = bss->next) -+ wpa_driver_nl80211_del_bss_beacon(bss); -+ -+ return 0; -+} -+ -+static int wpa_driver_nl80211_stop_ap(void *priv) -+{ -+ struct i802_bss *bss = priv; -+ return wpa_driver_nl80211_del_beacon(bss->drv); -+} - - /** - * wpa_driver_nl80211_deinit - Deinitialize nl80211 driver interface -@@ -9855,4 +9872,5 @@ const struct wpa_driver_ops wpa_driver_n - .tdls_oper = nl80211_tdls_oper, - #endif /* CONFIG_TDLS */ - .update_ft_ies = wpa_driver_nl80211_update_ft_ies, -+ .stop_ap = wpa_driver_nl80211_stop_ap, - }; ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -2095,6 +2095,9 @@ struct wpa_driver_ops { - */ - int (*probe_req_report)(void *priv, int report); - -+ -+ int (*stop_ap)(void *priv); -+ - /** - * deinit_ap - Deinitialize AP mode - * @priv: Private driver interface data diff --git a/package/hostapd/patches/452-ctrl_iface_reload.patch b/package/hostapd/patches/452-ctrl_iface_reload.patch deleted file mode 100644 index 85e871f..0000000 --- a/package/hostapd/patches/452-ctrl_iface_reload.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -33,6 +33,7 @@ - #include "wps/wps.h" - #include "config_file.h" - #include "ctrl_iface.h" -+#include "config_file.h" - - - struct wpa_ctrl_dst { -@@ -43,6 +44,7 @@ struct wpa_ctrl_dst { - int errors; - }; - -+static char *reload_opts = NULL; - - static void hostapd_ctrl_iface_send(struct hostapd_data *hapd, int level, - const char *buf, size_t len); -@@ -152,6 +154,68 @@ static int hostapd_ctrl_iface_new_sta(st - return 0; - } - -+static int hostapd_ctrl_iface_set_down(struct hostapd_data *hapd) -+{ -+ if (hapd->driver->stop_ap) -+ hapd->driver->stop_ap(hapd->drv_priv); -+ return 0; -+} -+ -+static char *get_option(char *opt, char *str) -+{ -+ int len = strlen(str); -+ -+ if (!strncmp(opt, str, len)) -+ return opt + len; -+ else -+ return NULL; -+} -+ -+static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname) -+{ -+ struct hostapd_config *conf; -+ char *opt, *val; -+ -+ conf = hostapd_config_read(fname); -+ if (!conf) -+ return NULL; -+ -+ for (opt = strtok(reload_opts, " "); -+ opt; -+ opt = strtok(NULL, " ")) { -+ -+ if ((val = get_option(opt, "channel="))) -+ conf->channel = atoi(val); -+ else if ((val = get_option(opt, "ht_capab="))) -+ conf->ht_capab = atoi(val); -+ else if ((val = get_option(opt, "ht_capab_mask="))) -+ conf->ht_capab &= atoi(val); -+ else if ((val = get_option(opt, "sec_chan="))) -+ conf->secondary_channel = atoi(val); -+ else if ((val = get_option(opt, "hw_mode="))) -+ conf->hw_mode = atoi(val); -+ else if ((val = get_option(opt, "ieee80211n="))) -+ conf->ieee80211n = atoi(val); -+ else -+ break; -+ } -+ -+ return conf; -+} -+ -+static int hostapd_ctrl_iface_update(struct hostapd_data *hapd, char *txt) -+{ -+ struct hostapd_config * (*config_read_cb)(const char *config_fname); -+ struct hostapd_iface *iface = hapd->iface; -+ -+ config_read_cb = iface->interfaces->config_read_cb; -+ iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read; -+ reload_opts = txt; -+ -+ hostapd_reload_config(iface); -+ -+ iface->interfaces->config_read_cb = config_read_cb; -+} - - #ifdef CONFIG_IEEE80211W - #ifdef NEED_AP_MLME -@@ -902,6 +966,10 @@ static void hostapd_ctrl_iface_receive(i - reply_len += res; - } - #endif /* CONFIG_NO_RADIUS */ -+ } else if (os_strcmp(buf, "DOWN") == 0) { -+ hostapd_ctrl_iface_set_down(hapd); -+ } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { -+ hostapd_ctrl_iface_update(hapd, buf + 7); - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, - reply_size); diff --git a/package/hostapd/patches/453-ap_sta_support.patch b/package/hostapd/patches/453-ap_sta_support.patch deleted file mode 100644 index a3dff04..0000000 --- a/package/hostapd/patches/453-ap_sta_support.patch +++ /dev/null @@ -1,223 +0,0 @@ ---- a/wpa_supplicant/wpa_supplicant_i.h -+++ b/wpa_supplicant/wpa_supplicant_i.h -@@ -96,6 +96,8 @@ struct wpa_interface { - * receiving of EAPOL frames from an additional interface. - */ - const char *bridge_ifname; -+ -+ const char *hostapd_ctrl; - }; - - /** -@@ -306,6 +308,8 @@ struct wpa_supplicant { - #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */ - char bridge_ifname[16]; - -+ struct wpa_ctrl *hostapd; -+ - char *confname; - struct wpa_config *conf; - int countermeasures; ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -13,6 +13,10 @@ PKG_CONFIG ?= pkg-config - CFLAGS += -I../src - CFLAGS += -I../src/utils - -+ifdef MULTICALL -+CFLAGS += -DMULTICALL -+endif -+ - -include .config - -include $(if $(MULTICALL),../hostapd/.config) - -@@ -76,6 +80,10 @@ OBJS_c = wpa_cli.o ../src/common/wpa_ctr - OBJS_c += ../src/utils/wpa_debug.o - OBJS_c += ../src/utils/common.o - -+ifdef MULTICALL -+OBJS += ../src/common/wpa_ctrl.o -+endif -+ - ifndef CONFIG_OS - ifdef CONFIG_NATIVE_WINDOWS - CONFIG_OS=win32 ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -107,6 +107,55 @@ extern int wpa_debug_show_keys; - extern int wpa_debug_timestamp; - extern struct wpa_driver_ops *wpa_drivers[]; - -+#ifdef MULTICALL -+static int hostapd_stop(struct wpa_supplicant *wpa_s) -+{ -+ const char *cmd = "DOWN"; -+ char buf[256]; -+ int len = sizeof(buf); -+ -+ if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) { -+ wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss) -+{ -+ char *cmd = NULL; -+ char buf[256]; -+ int len = sizeof(buf); -+ int channel, hw_mode; -+ int ret; -+ -+ if (!bss) -+ return; -+ -+ if (bss->freq < 4000) { -+ hw_mode = HOSTAPD_MODE_IEEE80211G; -+ channel = (bss->freq - 2407) / 5; -+ } else { -+ hw_mode = HOSTAPD_MODE_IEEE80211A; -+ channel = (bss->freq - 5000) / 5; -+ } -+ -+ if (asprintf(&cmd, "UPDATE channel=%d sec_chan=0 hw_mode=%d ieee80211n=%d", -+ channel, hw_mode, !!bss->ht_capab) < 0) { -+ return -1; -+ } -+ -+ ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL); -+ free(cmd); -+ -+ if (ret < 0) { -+ wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n"); -+ return -1; -+ } -+ return 0; -+} -+#endif -+ - /* Configure default/group WEP keys for static WEP */ - int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid) - { -@@ -667,8 +716,16 @@ void wpa_supplicant_set_state(struct wpa - #endif /* CONFIG_P2P */ - - sme_sched_obss_scan(wpa_s, 1); -+#ifdef MULTICALL -+ if (wpa_s->hostapd) -+ hostapd_reload(wpa_s, wpa_s->current_bss); -+#endif - } else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING || - state == WPA_ASSOCIATED) { -+#ifdef MULTICALL -+ if (wpa_s->hostapd) -+ hostapd_stop(wpa_s); -+#endif - wpa_s->new_connection = 1; - wpa_drv_set_operstate(wpa_s, 0); - #ifndef IEEE8021X_EAPOL -@@ -2853,6 +2910,21 @@ static int wpa_supplicant_init_iface(str - os_strlcpy(wpa_s->bridge_ifname, iface->bridge_ifname, - sizeof(wpa_s->bridge_ifname)); - } -+#ifdef MULTICALL -+ if (iface->hostapd_ctrl) { -+ char *cmd = "DOWN"; -+ char buf[256]; -+ int len = sizeof(buf); -+ -+ wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl); -+ if (!wpa_s->hostapd) { -+ wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n"); -+ return -1; -+ } -+ if (hostapd_stop(wpa_s) < 0) -+ return -1; -+ } -+#endif - - /* RSNA Supplicant Key Management - INITIALIZE */ - eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE); ---- a/wpa_supplicant/bss.c -+++ b/wpa_supplicant/bss.c -@@ -11,6 +11,7 @@ - #include "utils/common.h" - #include "utils/eloop.h" - #include "common/ieee802_11_defs.h" -+#include "common/ieee802_11_common.h" - #include "drivers/driver.h" - #include "wpa_supplicant_i.h" - #include "config.h" -@@ -245,6 +246,9 @@ static void calculate_update_time(const - static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src, - struct os_time *fetch_time) - { -+ struct ieee80211_ht_capabilities *capab; -+ struct ieee802_11_elems elems; -+ - dst->flags = src->flags; - os_memcpy(dst->bssid, src->bssid, ETH_ALEN); - dst->freq = src->freq; -@@ -255,6 +259,12 @@ static void wpa_bss_copy_res(struct wpa_ - dst->level = src->level; - dst->tsf = src->tsf; - -+ memset(&elems, 0, sizeof(elems)); -+ ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0); -+ capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities; -+ if (capab) -+ dst->ht_capab = le_to_host16(capab->ht_capabilities_info); -+ - calculate_update_time(fetch_time, src->age, &dst->last_update); - } - ---- a/wpa_supplicant/main.c -+++ b/wpa_supplicant/main.c -@@ -25,7 +25,7 @@ static void usage(void) - "usage:\n" - " wpa_supplicant [-BddhKLqqstuvW] [-P] " - "[-g] \\\n" -- " -i -c [-C] [-D] " -+ " -i -c [-C] [-D] [-H]" - "[-p] \\\n" - " [-b] [-f] [-e] " - "\\\n" -@@ -67,6 +67,7 @@ static void usage(void) - #endif /* CONFIG_DEBUG_LINUX_TRACING */ - printf(" -t = include timestamp in debug messages\n" - " -h = show this help text\n" -+ " -H = connect to a hostapd instance to manage state changes\n" - " -L = show license (BSD)\n" - " -o = override driver parameter for new interfaces\n" - " -O = override ctrl_interface parameter for new interfaces\n" -@@ -155,7 +156,7 @@ int main(int argc, char *argv[]) - - for (;;) { - c = getopt(argc, argv, -- "b:Bc:C:D:de:f:g:hi:KLNo:O:p:P:qsTtuvW"); -+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); - if (c < 0) - break; - switch (c) { -@@ -199,6 +200,9 @@ int main(int argc, char *argv[]) - usage(); - exitcode = 0; - goto out; -+ case 'H': -+ iface->hostapd_ctrl = optarg; -+ break; - case 'i': - iface->ifname = optarg; - break; ---- a/wpa_supplicant/bss.h -+++ b/wpa_supplicant/bss.h -@@ -69,6 +69,8 @@ struct wpa_bss { - u8 ssid[32]; - /** Length of SSID */ - size_t ssid_len; -+ /** HT caapbilities */ -+ u16 ht_capab; - /** Frequency of the channel in MHz (e.g., 2412 = channel 1) */ - int freq; - /** Beacon interval in TUs (host byte order) */ diff --git a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch b/package/hostapd/patches/460-disable_ctrl_iface_mib.patch deleted file mode 100644 index a51ade8..0000000 --- a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch +++ /dev/null @@ -1,168 +0,0 @@ ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -136,6 +136,9 @@ endif - ifdef CONFIG_NO_CTRL_IFACE - CFLAGS += -DCONFIG_NO_CTRL_IFACE - else -+ifdef CONFIG_CTRL_IFACE_MIB -+CFLAGS += -DCONFIG_CTRL_IFACE_MIB -+endif - OBJS += ctrl_iface.o - OBJS += ../src/ap/ctrl_iface_ap.o - endif ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -937,6 +937,7 @@ static void hostapd_ctrl_iface_receive(i - } else if (os_strncmp(buf, "RELOG", 5) == 0) { - if (wpa_debug_reopen_file() < 0) - reply_len = -1; -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "MIB") == 0) { - reply_len = ieee802_11_get_mib(hapd, reply, reply_size); - if (reply_len >= 0) { -@@ -966,10 +967,12 @@ static void hostapd_ctrl_iface_receive(i - reply_len += res; - } - #endif /* CONFIG_NO_RADIUS */ -+#endif - } else if (os_strcmp(buf, "DOWN") == 0) { - hostapd_ctrl_iface_set_down(hapd); - } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { - hostapd_ctrl_iface_update(hapd, buf + 7); -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, - reply_size); -@@ -979,6 +982,7 @@ static void hostapd_ctrl_iface_receive(i - } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { - reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply, - reply_size); -+#endif - } else if (os_strcmp(buf, "ATTACH") == 0) { - if (hostapd_ctrl_iface_attach(hapd, &from, fromlen)) - reply_len = -1; ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -758,6 +758,9 @@ ifdef CONFIG_WNM - OBJS += ../src/ap/wnm_ap.o - endif - ifdef CONFIG_CTRL_IFACE -+ifdef CONFIG_CTRL_IFACE_MIB -+CFLAGS += -DCONFIG_CTRL_IFACE_MIB -+endif - OBJS += ../src/ap/ctrl_iface_ap.o - endif - ---- a/wpa_supplicant/ctrl_iface.c -+++ b/wpa_supplicant/ctrl_iface.c -@@ -5051,6 +5051,7 @@ char * wpa_supplicant_ctrl_iface_process - reply_len = -1; - } else if (os_strncmp(buf, "NOTE ", 5) == 0) { - wpa_printf(MSG_INFO, "NOTE: %s", buf + 5); -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "MIB") == 0) { - reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size); - if (reply_len >= 0) { -@@ -5062,6 +5063,7 @@ char * wpa_supplicant_ctrl_iface_process - else - reply_len += res; - } -+#endif - } else if (os_strncmp(buf, "STATUS", 6) == 0) { - reply_len = wpa_supplicant_ctrl_iface_status( - wpa_s, buf + 6, reply, reply_size); -@@ -5465,6 +5467,7 @@ char * wpa_supplicant_ctrl_iface_process - reply_len = wpa_supplicant_ctrl_iface_bss( - wpa_s, buf + 4, reply, reply_size); - #ifdef CONFIG_AP -+#ifdef CONFIG_CTRL_IFACE_MIB - } else if (os_strcmp(buf, "STA-FIRST") == 0) { - reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size); - } else if (os_strncmp(buf, "STA ", 4) == 0) { -@@ -5473,6 +5476,7 @@ char * wpa_supplicant_ctrl_iface_process - } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { - reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply, - reply_size); -+#endif - } else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) { - if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15)) - reply_len = -1; ---- a/src/ap/ctrl_iface_ap.c -+++ b/src/ap/ctrl_iface_ap.c -@@ -20,6 +20,7 @@ - #include "ctrl_iface_ap.h" - #include "ap_drv_ops.h" - -+#ifdef CONFIG_CTRL_IFACE_MIB - - static int hostapd_get_sta_conn_time(struct sta_info *sta, - char *buf, size_t buflen) -@@ -129,6 +130,7 @@ int hostapd_ctrl_iface_sta_next(struct h - return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen); - } - -+#endif - - #ifdef CONFIG_P2P_MANAGER - static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype, -@@ -303,3 +305,4 @@ int hostapd_ctrl_iface_disassociate(stru - - return 0; - } -+ ---- a/src/ap/ieee802_1x.c -+++ b/src/ap/ieee802_1x.c -@@ -2048,6 +2048,7 @@ static const char * bool_txt(Boolean boo - return bool ? "TRUE" : "FALSE"; - } - -+#ifdef CONFIG_CTRL_IFACE_MIB - - int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen) - { -@@ -2200,6 +2201,7 @@ int ieee802_1x_get_mib_sta(struct hostap - return len; - } - -+#endif - - static void ieee802_1x_finished(struct hostapd_data *hapd, - struct sta_info *sta, int success) ---- a/src/ap/wpa_auth.c -+++ b/src/ap/wpa_auth.c -@@ -2687,6 +2687,7 @@ static const char * wpa_bool_txt(int boo - return bool ? "TRUE" : "FALSE"; - } - -+#ifdef CONFIG_CTRL_IFACE_MIB - - #define RSN_SUITE "%02x-%02x-%02x-%d" - #define RSN_SUITE_ARG(s) \ -@@ -2831,7 +2832,7 @@ int wpa_get_mib_sta(struct wpa_state_mac - - return len; - } -- -+#endif - - void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth) - { ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -1848,6 +1848,8 @@ static u32 wpa_key_mgmt_suite(struct wpa - } - - -+#ifdef CONFIG_CTRL_IFACE_MIB -+ - #define RSN_SUITE "%02x-%02x-%02x-%d" - #define RSN_SUITE_ARG(s) \ - ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff -@@ -1931,6 +1933,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch - - return (int) len; - } -+#endif - #endif /* CONFIG_CTRL_IFACE */ - - diff --git a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch b/package/hostapd/patches/470-wpa_ie_cap_workaround.patch deleted file mode 100644 index 974ec3d..0000000 --- a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/src/common/wpa_common.c -+++ b/src/common/wpa_common.c -@@ -965,6 +965,31 @@ const char * wpa_key_mgmt_txt(int key_mg - } - - -+static void wpa_fixup_wpa_ie_rsn(u8 *assoc_ie, const u8 *wpa_msg_ie, -+ size_t rsn_ie_len) -+{ -+ int pos, count; -+ -+ pos = sizeof(struct rsn_ie_hdr) + RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ count = WPA_GET_LE16(wpa_msg_ie + pos); -+ pos += 2 + count * RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ count = WPA_GET_LE16(wpa_msg_ie + pos); -+ pos += 2 + count * RSN_SELECTOR_LEN; -+ if (rsn_ie_len < pos + 2) -+ return; -+ -+ if (!assoc_ie[pos] && !assoc_ie[pos + 1] && -+ (wpa_msg_ie[pos] || wpa_msg_ie[pos + 1])) -+ memcpy(&assoc_ie[pos], &wpa_msg_ie[pos], 2); -+} -+ -+ - int wpa_compare_rsn_ie(int ft_initial_assoc, - const u8 *ie1, size_t ie1len, - const u8 *ie2, size_t ie2len) -@@ -972,8 +997,19 @@ int wpa_compare_rsn_ie(int ft_initial_as - if (ie1 == NULL || ie2 == NULL) - return -1; - -- if (ie1len == ie2len && os_memcmp(ie1, ie2, ie1len) == 0) -- return 0; /* identical IEs */ -+ if (ie1len == ie2len) { -+ u8 *ie_tmp; -+ -+ if (os_memcmp(ie1, ie2, ie1len) == 0) -+ return 0; /* identical IEs */ -+ -+ ie_tmp = alloca(ie1len); -+ memcpy(ie_tmp, ie1, ie1len); -+ wpa_fixup_wpa_ie_rsn(ie_tmp, ie2, ie1len); -+ -+ if (os_memcmp(ie_tmp, ie2, ie1len) == 0) -+ return 0; /* only mismatch in RSN capabilties */ -+ } - - #ifdef CONFIG_IEEE80211R - if (ft_initial_assoc) { diff --git a/package/hostapd/patches/480-terminate_on_setup_failure.patch b/package/hostapd/patches/480-terminate_on_setup_failure.patch deleted file mode 100644 index 3f8a778..0000000 --- a/package/hostapd/patches/480-terminate_on_setup_failure.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -911,11 +911,8 @@ int hostapd_setup_interface_complete(str - size_t j; - u8 *prev_addr; - -- if (err) { -- wpa_printf(MSG_ERROR, "Interface initialization failed"); -- eloop_terminate(); -- return -1; -- } -+ if (err) -+ goto error; - - wpa_printf(MSG_DEBUG, "Completing interface initialization"); - if (hapd->iconf->channel) { -@@ -935,7 +932,7 @@ int hostapd_setup_interface_complete(str - hapd->iconf->vht_oper_centr_freq_seg1_idx)) { - wpa_printf(MSG_ERROR, "Could not set channel for " - "kernel driver"); -- return -1; -+ goto error; - } - } - -@@ -946,7 +943,7 @@ int hostapd_setup_interface_complete(str - hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211, - HOSTAPD_LEVEL_WARNING, - "Failed to prepare rates table."); -- return -1; -+ goto error; - } - } - -@@ -954,14 +951,14 @@ int hostapd_setup_interface_complete(str - hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) { - wpa_printf(MSG_ERROR, "Could not set RTS threshold for " - "kernel driver"); -- return -1; -+ goto error; - } - - if (hapd->iconf->fragm_threshold > -1 && - hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) { - wpa_printf(MSG_ERROR, "Could not set fragmentation threshold " - "for kernel driver"); -- return -1; -+ goto error; - } - - prev_addr = hapd->own_addr; -@@ -971,7 +968,7 @@ int hostapd_setup_interface_complete(str - if (j) - os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN); - if (hostapd_setup_bss(hapd, j == 0)) -- return -1; -+ goto error; - if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) - prev_addr = hapd->own_addr; - } -@@ -983,7 +980,7 @@ int hostapd_setup_interface_complete(str - if (hostapd_driver_commit(hapd) < 0) { - wpa_printf(MSG_ERROR, "%s: Failed to commit driver " - "configuration", __func__); -- return -1; -+ goto error; - } - - /* -@@ -1004,6 +1001,11 @@ int hostapd_setup_interface_complete(str - iface->bss[0]->conf->iface); - - return 0; -+ -+error: -+ wpa_printf(MSG_ERROR, "Interface initialization failed"); -+ eloop_terminate(); -+ return -1; - } - - diff --git a/package/hostapd/patches/500-random_pool_add_kernel.patch b/package/hostapd/patches/500-random_pool_add_kernel.patch deleted file mode 100644 index ccecb22..0000000 --- a/package/hostapd/patches/500-random_pool_add_kernel.patch +++ /dev/null @@ -1,177 +0,0 @@ ---- a/src/crypto/random.c -+++ b/src/crypto/random.c -@@ -25,6 +25,7 @@ - #include "utils/includes.h" - #ifdef __linux__ - #include -+#include - #endif /* __linux__ */ - - #include "utils/common.h" -@@ -33,6 +34,8 @@ - #include "sha1.h" - #include "random.h" - -+#define RANDOM_STAMPFILE "/var/run/.random_available" -+ - #define POOL_WORDS 32 - #define POOL_WORDS_MASK (POOL_WORDS - 1) - #define POOL_TAP1 26 -@@ -43,6 +46,8 @@ - #define EXTRACT_LEN 16 - #define MIN_READY_MARK 2 - -+#ifndef CONFIG_NO_RANDOM_POOL -+ - static u32 pool[POOL_WORDS]; - static unsigned int input_rotate = 0; - static unsigned int pool_pos = 0; -@@ -123,7 +128,7 @@ static void random_extract(u8 *out) - } - - --void random_add_randomness(const void *buf, size_t len) -+static void random_pool_add_randomness(const void *buf, size_t len) - { - struct os_time t; - static unsigned int count = 0; -@@ -213,16 +218,22 @@ int random_get_bytes(void *buf, size_t l - int random_pool_ready(void) - { - #ifdef __linux__ -+ struct stat st; - int fd; - ssize_t res; - -+ if (stat(RANDOM_STAMPFILE, &st) == 0) -+ return 1; -+ - /* - * Make sure that there is reasonable entropy available before allowing - * some key derivation operations to proceed. - */ - -- if (dummy_key_avail == sizeof(dummy_key)) -+ if (dummy_key_avail == sizeof(dummy_key)) { -+ random_mark_pool_ready(); - return 1; /* Already initialized - good to continue */ -+ } - - /* - * Try to fetch some more data from the kernel high quality -@@ -257,6 +268,7 @@ int random_pool_ready(void) - if (dummy_key_avail == sizeof(dummy_key)) { - if (own_pool_ready < MIN_READY_MARK) - own_pool_ready = MIN_READY_MARK; -+ random_mark_pool_ready(); - random_write_entropy(); - return 1; - } -@@ -269,6 +281,7 @@ int random_pool_ready(void) - total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) { - wpa_printf(MSG_INFO, "random: Allow operation to proceed " - "based on internal entropy"); -+ random_mark_pool_ready(); - return 1; - } - -@@ -284,10 +297,16 @@ int random_pool_ready(void) - - void random_mark_pool_ready(void) - { -+ int fd; -+ - own_pool_ready++; - wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be " - "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK); - random_write_entropy(); -+ -+ fd = open(RANDOM_STAMPFILE, O_CREAT | O_WRONLY | O_EXCL | O_NOFOLLOW, 0600); -+ if (fd >= 0) -+ close(fd); - } - - -@@ -444,3 +463,22 @@ void random_deinit(void) - os_free(random_entropy_file); - random_entropy_file = NULL; - } -+ -+#endif /* CONFIG_NO_RANDOM_POOL */ -+ -+ -+void random_add_randomness(const void *buf, size_t len) -+{ -+#ifdef __linux__ -+ int fd; -+ -+ fd = open("/dev/random", O_RDWR); -+ if (fd >= 0) { -+ write(fd, buf, len); -+ close(fd); -+ } -+#endif -+#ifndef CONFIG_NO_RANDOM_POOL -+ random_pool_add_randomness(buf, len); -+#endif -+} ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -1226,9 +1226,8 @@ endif - - ifdef CONFIG_NO_RANDOM_POOL - CFLAGS += -DCONFIG_NO_RANDOM_POOL --else --OBJS += ../src/crypto/random.o - endif -+OBJS += ../src/crypto/random.o - - ifdef CONFIG_CTRL_IFACE - ifeq ($(CONFIG_CTRL_IFACE), y) ---- a/wpa_supplicant/Android.mk -+++ b/wpa_supplicant/Android.mk -@@ -1191,9 +1191,8 @@ endif - - ifdef CONFIG_NO_RANDOM_POOL - L_CFLAGS += -DCONFIG_NO_RANDOM_POOL --else --OBJS += src/crypto/random.c - endif -+OBJS += src/crypto/random.c - - ifdef CONFIG_CTRL_IFACE - ifeq ($(CONFIG_CTRL_IFACE), y) ---- a/hostapd/Android.mk -+++ b/hostapd/Android.mk -@@ -775,12 +775,12 @@ endif - ifdef CONFIG_NO_RANDOM_POOL - L_CFLAGS += -DCONFIG_NO_RANDOM_POOL - else --OBJS += src/crypto/random.c --HOBJS += src/crypto/random.c - HOBJS += src/utils/eloop.c - HOBJS += $(SHA1OBJS) - HOBJS += src/crypto/md5.c - endif -+OBJS += src/crypto/random.c -+HOBJS += src/crypto/random.c - - ifdef CONFIG_RADIUS_SERVER - L_CFLAGS += -DRADIUS_SERVER ---- a/hostapd/Makefile -+++ b/hostapd/Makefile -@@ -748,12 +748,12 @@ endif - ifdef CONFIG_NO_RANDOM_POOL - CFLAGS += -DCONFIG_NO_RANDOM_POOL - else --OBJS += ../src/crypto/random.o --HOBJS += ../src/crypto/random.o - HOBJS += ../src/utils/eloop.o - HOBJS += $(SHA1OBJS) - HOBJS += ../src/crypto/md5.o - endif -+OBJS += ../src/crypto/random.o -+HOBJS += ../src/crypto/random.o - - ifdef CONFIG_RADIUS_SERVER - CFLAGS += -DRADIUS_SERVER diff --git a/package/hostapd/patches/510-bring_down_interface.patch b/package/hostapd/patches/510-bring_down_interface.patch deleted file mode 100644 index e92c122..0000000 --- a/package/hostapd/patches/510-bring_down_interface.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -7616,8 +7616,6 @@ static int wpa_driver_nl80211_set_mode(s - ret = nl80211_set_mode(drv, drv->ifindex, nlmode); - if (ret == -EACCES) - break; -- res = linux_set_iface_flags(drv->global->ioctl_sock, -- bss->ifname, 1); - if (res && !ret) - ret = -1; - else if (ret != -EBUSY) -@@ -7633,6 +7631,7 @@ static int wpa_driver_nl80211_set_mode(s - "interface is down"); - drv->nlmode = nlmode; - drv->ignore_if_down_event = 1; -+ linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1); - } - - done: diff --git a/package/hostapd/patches/520-fix_wps_pin_crash.patch b/package/hostapd/patches/520-fix_wps_pin_crash.patch deleted file mode 100644 index 80d562c..0000000 --- a/package/hostapd/patches/520-fix_wps_pin_crash.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -479,6 +479,9 @@ static int hostapd_ctrl_iface_wps_ap_pin - char *pos; - const char *pin_txt; - -+ if (!hapd->wps) -+ return -1; -+ - pos = os_strchr(txt, ' '); - if (pos) - *pos++ = '\0'; diff --git a/package/hostapd/patches/530-wps_single_auth_enc_type.patch b/package/hostapd/patches/530-wps_single_auth_enc_type.patch deleted file mode 100644 index 6f4a655..0000000 --- a/package/hostapd/patches/530-wps_single_auth_enc_type.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/src/ap/wps_hostapd.c -+++ b/src/ap/wps_hostapd.c -@@ -989,11 +989,9 @@ int hostapd_init_wps(struct hostapd_data - - if (conf->rsn_pairwise & WPA_CIPHER_CCMP) - wps->encr_types |= WPS_ENCR_AES; -- if (conf->rsn_pairwise & WPA_CIPHER_TKIP) -+ else if (conf->rsn_pairwise & WPA_CIPHER_TKIP) - wps->encr_types |= WPS_ENCR_TKIP; -- } -- -- if (conf->wpa & WPA_PROTO_WPA) { -+ } else if (conf->wpa & WPA_PROTO_WPA) { - if (conf->wpa_key_mgmt & WPA_KEY_MGMT_PSK) - wps->auth_types |= WPS_AUTH_WPAPSK; - if (conf->wpa_key_mgmt & WPA_KEY_MGMT_IEEE8021X) -@@ -1001,7 +999,7 @@ int hostapd_init_wps(struct hostapd_data - - if (conf->wpa_pairwise & WPA_CIPHER_CCMP) - wps->encr_types |= WPS_ENCR_AES; -- if (conf->wpa_pairwise & WPA_CIPHER_TKIP) -+ else if (conf->wpa_pairwise & WPA_CIPHER_TKIP) - wps->encr_types |= WPS_ENCR_TKIP; - } - diff --git a/package/hostapd/patches/540-dynamic_20_40_mhz.patch b/package/hostapd/patches/540-dynamic_20_40_mhz.patch deleted file mode 100644 index a7b39db..0000000 --- a/package/hostapd/patches/540-dynamic_20_40_mhz.patch +++ /dev/null @@ -1,206 +0,0 @@ ---- a/hostapd/config_file.c -+++ b/hostapd/config_file.c -@@ -2474,6 +2474,10 @@ static int hostapd_config_fill(struct ho - "ht_capab", line); - errors++; - } -+ } else if (os_strcmp(buf, "dynamic_ht40") == 0) { -+ conf->dynamic_ht40 = atoi(pos); -+ if (conf->dynamic_ht40 == 1) -+ conf->dynamic_ht40 = 1500; - } else if (os_strcmp(buf, "require_ht") == 0) { - conf->require_ht = atoi(pos); - #endif /* CONFIG_IEEE80211N */ ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -515,6 +515,7 @@ struct hostapd_config { - int ieee80211n; - int secondary_channel; - int require_ht; -+ int dynamic_ht40; - u32 vht_capab; - int ieee80211ac; - int require_vht; ---- a/src/ap/hostapd.c -+++ b/src/ap/hostapd.c -@@ -22,6 +22,7 @@ - #include "beacon.h" - #include "iapp.h" - #include "ieee802_1x.h" -+#include "ieee802_11.h" - #include "ieee802_11_auth.h" - #include "vlan_init.h" - #include "wpa_auth.h" -@@ -348,6 +349,7 @@ static void hostapd_cleanup_iface_pre(st - - static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface) - { -+ hostapd_deinit_ht(iface); - hostapd_free_hw_features(iface->hw_features, iface->num_hw_features); - iface->hw_features = NULL; - os_free(iface->current_rates); ---- a/src/ap/hostapd.h -+++ b/src/ap/hostapd.h -@@ -269,6 +269,9 @@ struct hostapd_iface { - /* Overlapping BSS information */ - int olbc_ht; - -+ int force_20mhz; -+ struct os_time last_20mhz_trigger; -+ - u16 ht_op_mode; - void (*scan_cb)(struct hostapd_iface *iface); - }; ---- a/src/ap/ieee802_11.c -+++ b/src/ap/ieee802_11.c -@@ -1484,6 +1484,9 @@ static void handle_beacon(struct hostapd - sizeof(mgmt->u.beacon)), &elems, - 0); - -+ if (!elems.ht_capabilities) -+ hostapd_trigger_20mhz(hapd->iface); -+ - ap_list_process_beacon(hapd->iface, mgmt, &elems, fi); - } - ---- a/src/ap/ieee802_11.h -+++ b/src/ap/ieee802_11.h -@@ -81,4 +81,17 @@ int hostapd_update_time_adv(struct hosta - void hostapd_client_poll_ok(struct hostapd_data *hapd, const u8 *addr); - u8 * hostapd_eid_bss_max_idle_period(struct hostapd_data *hapd, u8 *eid); - -+#ifdef CONFIG_IEEE80211N -+void hostapd_trigger_20mhz(struct hostapd_iface *iface); -+void hostapd_deinit_ht(struct hostapd_iface *iface); -+ -+#else -+static inline void hostapd_deinit_ht(struct hostapd_iface *iface) -+{ -+} -+static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface) -+{ -+} -+#endif /* CONFIG_IEEE80211N */ -+ - #endif /* IEEE802_11_H */ ---- a/src/ap/ieee802_11_ht.c -+++ b/src/ap/ieee802_11_ht.c -@@ -20,9 +20,11 @@ - #include "drivers/driver.h" - #include "hostapd.h" - #include "ap_config.h" -+#include "ap_drv_ops.h" - #include "sta_info.h" - #include "beacon.h" - #include "ieee802_11.h" -+#include "utils/eloop.h" - - - u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid) -@@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos - - oper->control_chan = hapd->iconf->channel; - oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode); -- if (hapd->iconf->secondary_channel == 1) -- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | -- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -- if (hapd->iconf->secondary_channel == -1) -- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | -- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ -+ if (!hapd->iface->force_20mhz) { -+ if (hapd->iconf->secondary_channel == 1) -+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | -+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ if (hapd->iconf->secondary_channel == -1) -+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | -+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; -+ } - - pos += sizeof(*oper); - -@@ -270,3 +275,84 @@ void hostapd_get_ht_capab(struct hostapd - - neg_ht_cap->ht_capabilities_info = host_to_le16(cap); - } -+ -+static void hostapd_set_force_20mhz(struct hostapd_iface *iface); -+ -+static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx) -+{ -+ struct hostapd_iface *iface = eloop_data; -+ struct os_time time; -+ int timeout; -+ -+ if (!iface->last_20mhz_trigger.sec) -+ return; -+ -+ os_get_time(&time); -+ timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 - -+ time.sec; -+ -+ if (timeout > 0) { -+ eloop_register_timeout(timeout, 0, hostapd_restore_40mhz, -+ iface, NULL); -+ return; -+ } -+ -+ iface->last_20mhz_trigger.sec = 0; -+ iface->last_20mhz_trigger.usec = 0; -+ -+ iface->force_20mhz = 0; -+ hostapd_set_force_20mhz(iface); -+} -+ -+static void hostapd_set_force_20mhz(struct hostapd_iface *iface) -+{ -+ int secondary_channel; -+ int i; -+ -+ ieee802_11_set_beacons(iface); -+ -+ for (i = 0; i < iface->num_bss; i++) { -+ struct hostapd_data *hapd = iface->bss[i]; -+ -+ if (iface->force_20mhz) -+ secondary_channel = 0; -+ else -+ secondary_channel = hapd->iconf->secondary_channel; -+ -+ if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq, -+ hapd->iconf->channel, -+ hapd->iconf->ieee80211n, -+ hapd->iconf->ieee80211ac, -+ secondary_channel, -+ hapd->iconf->vht_oper_chwidth, -+ hapd->iconf->vht_oper_centr_freq_seg0_idx, -+ hapd->iconf->vht_oper_centr_freq_seg1_idx)) { -+ wpa_printf(MSG_ERROR, "Could not set channel for " -+ "kernel driver"); -+ } -+ } -+} -+ -+void hostapd_deinit_ht(struct hostapd_iface *iface) -+{ -+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); -+} -+ -+void hostapd_trigger_20mhz(struct hostapd_iface *iface) -+{ -+ if (!iface->conf->dynamic_ht40) -+ return; -+ -+ if (!iface->force_20mhz) { -+ iface->force_20mhz = 1; -+ hostapd_set_force_20mhz(iface); -+ } -+ -+ if (!iface->last_20mhz_trigger.sec) { -+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); -+ eloop_register_timeout(iface->conf->dynamic_ht40, 0, -+ hostapd_restore_40mhz, iface, NULL); -+ } -+ -+ os_get_time(&iface->last_20mhz_trigger); -+} diff --git a/package/hostapd/patches/550-limit_debug_messages.patch b/package/hostapd/patches/550-limit_debug_messages.patch deleted file mode 100644 index 659e980..0000000 --- a/package/hostapd/patches/550-limit_debug_messages.patch +++ /dev/null @@ -1,213 +0,0 @@ ---- a/src/utils/wpa_debug.c -+++ b/src/utils/wpa_debug.c -@@ -201,7 +201,7 @@ void wpa_debug_close_linux_tracing(void) - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_printf(int level, const char *fmt, ...) -+void _wpa_printf(int level, const char *fmt, ...) - { - va_list ap; - -@@ -248,8 +248,8 @@ void wpa_printf(int level, const char *f - } - - --static void _wpa_hexdump(int level, const char *title, const u8 *buf, -- size_t len, int show) -+void _wpa_hexdump(int level, const char *title, const u8 *buf, -+ size_t len, int show) - { - size_t i; - -@@ -375,20 +375,9 @@ static void _wpa_hexdump(int level, cons - #endif /* CONFIG_ANDROID_LOG */ - } - --void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump(level, title, buf, len, 1); --} -- -- --void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); --} - -- --static void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -- size_t len, int show) -+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -+ size_t len, int show) - { - size_t i, llen; - const u8 *pos = buf; -@@ -495,19 +484,6 @@ static void _wpa_hexdump_ascii(int level - } - - --void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len) --{ -- _wpa_hexdump_ascii(level, title, buf, len, 1); --} -- -- --void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, -- size_t len) --{ -- _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); --} -- -- - #ifdef CONFIG_DEBUG_FILE - static char *last_path = NULL; - #endif /* CONFIG_DEBUG_FILE */ -@@ -591,7 +567,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_ - } - - --void wpa_msg(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg(void *ctx, int level, const char *fmt, ...) - { - va_list ap; - char *buf; -@@ -625,7 +601,7 @@ void wpa_msg(void *ctx, int level, const - } - - --void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) - { - va_list ap; - char *buf; ---- a/src/utils/wpa_debug.h -+++ b/src/utils/wpa_debug.h -@@ -43,6 +43,17 @@ int wpa_debug_open_file(const char *path - int wpa_debug_reopen_file(void); - void wpa_debug_close_file(void); - -+/* internal */ -+void _wpa_hexdump(int level, const char *title, const u8 *buf, -+ size_t len, int show); -+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -+ size_t len, int show); -+extern int wpa_debug_show_keys; -+ -+#ifndef CONFIG_MSG_MIN_PRIORITY -+#define CONFIG_MSG_MIN_PRIORITY 0 -+#endif -+ - /** - * wpa_debug_printf_timestamp - Print timestamp for debug output - * -@@ -63,9 +74,15 @@ void wpa_debug_print_timestamp(void); - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_printf(int level, const char *fmt, ...) -+void _wpa_printf(int level, const char *fmt, ...) - PRINTF_FORMAT(2, 3); - -+#define wpa_printf(level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_printf(level, __VA_ARGS__); \ -+ } while(0) -+ - /** - * wpa_hexdump - conditional hex dump - * @level: priority level (MSG_*) of the message -@@ -77,7 +94,13 @@ PRINTF_FORMAT(2, 3); - * output may be directed to stdout, stderr, and/or syslog based on - * configuration. The contents of buf is printed out has hex dump. - */ --void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len); -+static inline void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump(level, title, buf, len, 1); -+} - - static inline void wpa_hexdump_buf(int level, const char *title, - const struct wpabuf *buf) -@@ -99,7 +122,13 @@ static inline void wpa_hexdump_buf(int l - * like wpa_hexdump(), but by default, does not include secret keys (passwords, - * etc.) in debug output. - */ --void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len); -+static inline void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); -+} - - static inline void wpa_hexdump_buf_key(int level, const char *title, - const struct wpabuf *buf) -@@ -121,8 +150,14 @@ static inline void wpa_hexdump_buf_key(i - * the hex numbers and ASCII characters (for printable range) are shown. 16 - * bytes per line will be shown. - */ --void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, -- size_t len); -+static inline void wpa_hexdump_ascii(int level, const char *title, -+ const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump_ascii(level, title, buf, len, 1); -+} - - /** - * wpa_hexdump_ascii_key - conditional hex dump, hide keys -@@ -138,8 +173,14 @@ void wpa_hexdump_ascii(int level, const - * bytes per line will be shown. This works like wpa_hexdump_ascii(), but by - * default, does not include secret keys (passwords, etc.) in debug output. - */ --void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, -- size_t len); -+static inline void wpa_hexdump_ascii_key(int level, const char *title, -+ const u8 *buf, size_t len) -+{ -+ if (level < CONFIG_MSG_MIN_PRIORITY) -+ return; -+ -+ _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); -+} - - /* - * wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce -@@ -172,7 +213,12 @@ void wpa_hexdump_ascii_key(int level, co - * - * Note: New line '\n' is added to the end of the text when printing to stdout. - */ --void wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); -+void _wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); -+#define wpa_msg(ctx, level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_msg(ctx, level, __VA_ARGS__); \ -+ } while(0) - - /** - * wpa_msg_ctrl - Conditional printf for ctrl_iface monitors -@@ -186,8 +232,13 @@ void wpa_msg(void *ctx, int level, const - * attached ctrl_iface monitors. In other words, it can be used for frequent - * events that do not need to be sent to syslog. - */ --void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) -+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) - PRINTF_FORMAT(3, 4); -+#define wpa_msg_ctrl(ctx, level, ...) \ -+ do { \ -+ if (level >= CONFIG_MSG_MIN_PRIORITY) \ -+ _wpa_msg_ctrl(ctx, level, __VA_ARGS__); \ -+ } while(0) - - typedef void (*wpa_msg_cb_func)(void *ctx, int level, const char *txt, - size_t len); diff --git a/package/hostapd/patches/560-indicate-features.patch b/package/hostapd/patches/560-indicate-features.patch deleted file mode 100644 index 9073bd43..0000000 --- a/package/hostapd/patches/560-indicate-features.patch +++ /dev/null @@ -1,82 +0,0 @@ ---- a/hostapd/main.c -+++ b/hostapd/main.c -@@ -14,6 +14,7 @@ - - #include "utils/common.h" - #include "utils/eloop.h" -+#include "utils/build_features.h" - #include "crypto/random.h" - #include "crypto/tls.h" - #include "common/version.h" -@@ -584,7 +585,7 @@ int main(int argc, char *argv[]) - - wpa_supplicant_event = hostapd_wpa_event; - for (;;) { -- c = getopt(argc, argv, "Bde:f:hKP:tvg:G:"); -+ c = getopt(argc, argv, "Bde:f:hKP:tg:G:v::"); - if (c < 0) - break; - switch (c) { -@@ -616,6 +617,8 @@ int main(int argc, char *argv[]) - wpa_debug_timestamp++; - break; - case 'v': -+ if (optarg) -+ exit(!has_feature(optarg)); - show_version(); - exit(1); - break; ---- a/wpa_supplicant/main.c -+++ b/wpa_supplicant/main.c -@@ -12,6 +12,7 @@ - #endif /* __linux__ */ - - #include "common.h" -+#include "build_features.h" - #include "wpa_supplicant_i.h" - #include "driver_i.h" - -@@ -156,7 +157,7 @@ int main(int argc, char *argv[]) - - for (;;) { - c = getopt(argc, argv, -- "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); -+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuv::W"); - if (c < 0) - break; - switch (c) { -@@ -248,8 +249,12 @@ int main(int argc, char *argv[]) - break; - #endif /* CONFIG_DBUS */ - case 'v': -- printf("%s\n", wpa_supplicant_version); -- exitcode = 0; -+ if (optarg) { -+ exitcode = !has_feature(optarg); -+ } else { -+ printf("%s\n", wpa_supplicant_version); -+ exitcode = 0; -+ } - goto out; - case 'W': - params.wait_for_monitor++; ---- /dev/null -+++ b/src/utils/build_features.h -@@ -0,0 +1,17 @@ -+#ifndef BUILD_FEATURES_H -+#define BUILD_FEATURES_H -+ -+static inline int has_feature(const char *feat) -+{ -+#ifdef IEEE8021X_EAPOL -+ if (!strcmp(feat, "eap")) -+ return 1; -+#endif -+#ifdef IEEE80211N -+ if (!strcmp(feat, "11n")) -+ return 1; -+#endif -+ return 0; -+} -+ -+#endif /* BUILD_FEATURES_H */ diff --git a/package/hostapd/patches/570-genl_connect_debug.patch b/package/hostapd/patches/570-genl_connect_debug.patch deleted file mode 100644 index 5f14048..0000000 --- a/package/hostapd/patches/570-genl_connect_debug.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -127,7 +127,7 @@ static struct nl_handle * nl_create_hand - } - - if (genl_connect(handle)) { -- wpa_printf(MSG_ERROR, "nl80211: Failed to connect to generic " -+ wpa_printf(MSG_DEBUG, "nl80211: Failed to connect to generic " - "netlink (%s)", dbg); - nl80211_handle_destroy(handle); - return NULL; diff --git a/package/hostapd/patches/590-hostapd_cli_ifdef.patch b/package/hostapd/patches/590-hostapd_cli_ifdef.patch deleted file mode 100644 index cbf1e48..0000000 --- a/package/hostapd/patches/590-hostapd_cli_ifdef.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/hostapd/hostapd_cli.c -+++ b/hostapd/hostapd_cli.c -@@ -67,7 +67,6 @@ static const char *commands_help = - #ifdef CONFIG_IEEE80211W - " sa_query send SA Query to a station\n" - #endif /* CONFIG_IEEE80211W */ --#ifdef CONFIG_WPS - " wps_pin [timeout] [addr] add WPS Enrollee PIN\n" - " wps_check_pin verify PIN checksum\n" - " wps_pbc indicate button pushed to initiate PBC\n" -@@ -79,7 +78,6 @@ static const char *commands_help = - #endif /* CONFIG_WPS_NFC */ - " wps_ap_pin [params..] enable/disable AP PIN\n" - " wps_config configure AP\n" --#endif /* CONFIG_WPS */ - " get_config show current configuration\n" - " help show this usage help\n" - " interface [ifname] show interfaces/select interface\n" -@@ -340,7 +338,6 @@ static int hostapd_cli_cmd_sa_query(stru - #endif /* CONFIG_IEEE80211W */ - - --#ifdef CONFIG_WPS - static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc, - char *argv[]) - { -@@ -559,7 +556,6 @@ static int hostapd_cli_cmd_wps_config(st - ssid_hex, argv[1]); - return wpa_ctrl_command(ctrl, buf); - } --#endif /* CONFIG_WPS */ - - - static int hostapd_cli_cmd_disassoc_imminent(struct wpa_ctrl *ctrl, int argc, -@@ -805,7 +801,6 @@ static struct hostapd_cli_cmd hostapd_cl - #ifdef CONFIG_IEEE80211W - { "sa_query", hostapd_cli_cmd_sa_query }, - #endif /* CONFIG_IEEE80211W */ --#ifdef CONFIG_WPS - { "wps_pin", hostapd_cli_cmd_wps_pin }, - { "wps_check_pin", hostapd_cli_cmd_wps_check_pin }, - { "wps_pbc", hostapd_cli_cmd_wps_pbc }, -@@ -818,7 +813,6 @@ static struct hostapd_cli_cmd hostapd_cl - #endif /* CONFIG_WPS_NFC */ - { "wps_ap_pin", hostapd_cli_cmd_wps_ap_pin }, - { "wps_config", hostapd_cli_cmd_wps_config }, --#endif /* CONFIG_WPS */ - { "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent }, - { "ess_disassoc", hostapd_cli_cmd_ess_disassoc }, - { "get_config", hostapd_cli_cmd_get_config }, diff --git a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch b/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch deleted file mode 100644 index 3345e55..0000000 --- a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch +++ /dev/null @@ -1,209 +0,0 @@ -From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Sun, 3 Jun 2012 18:22:56 +0200 -Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used - with the ibss join command - -Signed-hostap: Antonio Quartulli ---- - src/drivers/driver.h | 6 +++ - wpa_supplicant/config.c | 96 +++++++++++++++++++++++++++++++++++++++ - wpa_supplicant/config_ssid.h | 6 +++ - wpa_supplicant/wpa_supplicant.c | 23 +++++++--- - 4 files changed, 124 insertions(+), 7 deletions(-) - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -19,6 +19,7 @@ - - #define WPA_SUPPLICANT_DRIVER_VERSION 4 - -+#include "drivers/nl80211_copy.h" - #include "common/defs.h" - - #define HOSTAPD_CHAN_DISABLED 0x00000001 -@@ -363,6 +364,11 @@ struct wpa_driver_associate_params { - */ - int freq; - -+ int beacon_interval; -+ int fixed_freq; -+ unsigned char rates[NL80211_MAX_SUPP_RATES]; -+ int mcast_rate; -+ - /** - * bg_scan_period - Background scan period in seconds, 0 to disable - * background scan, or -1 to indicate no change to default driver ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -14,6 +14,7 @@ - #include "rsn_supp/wpa.h" - #include "eap_peer/eap.h" - #include "p2p/p2p.h" -+#include "drivers/nl80211_copy.h" - #include "config.h" - - -@@ -1376,6 +1377,97 @@ static char * wpa_config_write_p2p_clien - - #endif /* CONFIG_P2P */ - -+static int wpa_config_parse_mcast_rate(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ ssid->mcast_rate = (int)(strtod(value, NULL) * 10); -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_mcast_rate(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value; -+ int res; -+ -+ if (!ssid->mcast_rate == 0) -+ return NULL; -+ -+ value = os_malloc(6); /* longest: 300.0 */ -+ if (value == NULL) -+ return NULL; -+ res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ -+static int wpa_config_parse_rates(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ int i; -+ char *pos, *r, *sptr, *end; -+ double rate; -+ -+ pos = (char *)value; -+ r = strtok_r(pos, ",", &sptr); -+ i = 0; -+ while (pos && i < NL80211_MAX_SUPP_RATES) { -+ rate = 0.0; -+ if (r) -+ rate = strtod(r, &end); -+ ssid->rates[i] = rate * 2; -+ if (*end != '\0' || rate * 2 != ssid->rates[i]) -+ return 1; -+ -+ i++; -+ r = strtok_r(NULL, ",", &sptr); -+ } -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_rates(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value, *pos; -+ int res, i; -+ -+ if (ssid->rates[0] <= 0) -+ return NULL; -+ -+ value = os_malloc(6 * NL80211_MAX_SUPP_RATES + 1); -+ if (value == NULL) -+ return NULL; -+ pos = value; -+ for (i = 0; i < NL80211_MAX_SUPP_RATES - 1; i++) { -+ res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ pos += res; -+ } -+ res = os_snprintf(pos, 6, "%.1f", -+ (double)ssid->rates[NL80211_MAX_SUPP_RATES - 1] / 2); -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ -+ value[6 * NL80211_MAX_SUPP_RATES] = '\0'; -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ - /* Helper macros for network block parser */ - - #ifdef OFFSET -@@ -1574,6 +1666,9 @@ static const struct parse_data ssid_fiel - { INT(ap_max_inactivity) }, - { INT(dtim_period) }, - { INT(beacon_int) }, -+ { INT_RANGE(fixed_freq, 0, 1) }, -+ { FUNC(rates) }, -+ { FUNC(mcast_rate) }, - }; - - #undef OFFSET ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -11,6 +11,7 @@ - - #include "common/defs.h" - #include "eap_peer/eap_config.h" -+#include "drivers/nl80211_copy.h" - - #define MAX_SSID_LEN 32 - -@@ -600,6 +601,10 @@ struct wpa_ssid { - * dereferences since it may not be updated in all cases. - */ - void *parent_cred; -+ -+ int fixed_freq; -+ unsigned char rates[NL80211_MAX_SUPP_RATES]; -+ double mcast_rate; - }; - - #endif /* CONFIG_SSID_H */ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1597,15 +1597,24 @@ void wpa_supplicant_associate(struct wpa - params.ssid_len = ssid->ssid_len; - } - -- if (ssid->mode == WPAS_MODE_IBSS && ssid->bssid_set && -- wpa_s->conf->ap_scan == 2) { -- params.bssid = ssid->bssid; -- params.fixed_bssid = 1; -+ if (ssid->mode == WPAS_MODE_IBSS) { -+ if (ssid->bssid_set && wpa_s->conf->ap_scan == 2) { -+ params.bssid = ssid->bssid; -+ params.fixed_bssid = 1; -+ } -+ if (ssid->frequency > 0 && params.freq == 0) -+ /* Initial channel for IBSS */ -+ params.freq = ssid->frequency; -+ params.fixed_freq = ssid->fixed_freq; -+ params.beacon_interval = ssid->beacon_int; -+ i = 0; -+ while (i < NL80211_MAX_SUPP_RATES) { -+ params.rates[i] = ssid->rates[i]; -+ i++; -+ } -+ params.mcast_rate = ssid->mcast_rate; - } - -- if (ssid->mode == WPAS_MODE_IBSS && ssid->frequency > 0 && -- params.freq == 0) -- params.freq = ssid->frequency; /* Initial channel for IBSS */ - params.wpa_ie = wpa_ie; - params.wpa_ie_len = wpa_ie_len; - params.pairwise_suite = cipher_pairwise; diff --git a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch b/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch deleted file mode 100644 index 5a6eb5e..0000000 --- a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch +++ /dev/null @@ -1,59 +0,0 @@ -From ffc4445958a3ed4064f2e1bf73fa478a61c5cf7b Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Sun, 3 Jun 2012 18:42:25 +0200 -Subject: [PATCHv2 602/602] driver_nl80211: use new parameters during ibss join - -Signed-hostap: Antonio Quartulli ---- - src/drivers/driver_nl80211.c | 33 ++++++++++++++++++++++++++++++++- - 1 file changed, 32 insertions(+), 1 deletion(-) - ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -7040,7 +7040,7 @@ static int wpa_driver_nl80211_ibss(struc - struct wpa_driver_associate_params *params) - { - struct nl_msg *msg; -- int ret = -1; -+ int ret = -1, i; - int count = 0; - - wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex); -@@ -7073,6 +7073,37 @@ retry: - wpa_printf(MSG_DEBUG, " * freq=%d", params->freq); - NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, params->freq); - -+ if (params->fixed_freq) { -+ wpa_printf(MSG_DEBUG, " * fixed_freq"); -+ NLA_PUT_FLAG(msg, NL80211_ATTR_FREQ_FIXED); -+ } -+ -+ if (params->beacon_interval > 0) { -+ wpa_printf(MSG_DEBUG, " * beacon_interval=%d", -+ params->beacon_interval); -+ NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL, -+ params->beacon_interval); -+ } -+ -+ if (params->rates[0] > 0) { -+ wpa_printf(MSG_DEBUG, " * basic_rates:"); -+ i = 0; -+ while (i < NL80211_MAX_SUPP_RATES && -+ params->rates[i] > 0) { -+ wpa_printf(MSG_DEBUG, " %.1f", -+ (double)params->rates[i] / 2); -+ i++; -+ } -+ NLA_PUT(msg, NL80211_ATTR_BSS_BASIC_RATES, i, -+ params->rates); -+ } -+ -+ if (params->mcast_rate > 0) { -+ wpa_printf(MSG_DEBUG, " * mcast_rates=%.1f", -+ (double)params->mcast_rate / 10); -+ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); -+ } -+ - ret = nl80211_set_conn_keys(params, msg); - if (ret) - goto nla_put_failure; diff --git a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch b/package/hostapd/patches/604-wpa_s-support-htmode-param.patch deleted file mode 100644 index 267bde8..0000000 --- a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch +++ /dev/null @@ -1,156 +0,0 @@ -From b9329c5dfeed7d5c55d2117d8dfe326fc40c8fb1 Mon Sep 17 00:00:00 2001 -From: Antonio Quartulli -Date: Tue, 3 Jul 2012 00:36:24 +0200 -Subject: [PATCH] wpa_s: support htmode param - -possible values are HT20, HT40-, HT40+ and NOHT - -Signed-off-by: Antonio Quartulli ---- - src/drivers/driver.h | 2 ++ - src/drivers/driver_nl80211.c | 16 ++++++++++ - wpa_supplicant/config.c | 66 +++++++++++++++++++++++++++++++++++++++ - wpa_supplicant/config_ssid.h | 2 ++ - wpa_supplicant/wpa_supplicant.c | 2 ++ - 5 files changed, 88 insertions(+) - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -368,6 +368,8 @@ struct wpa_driver_associate_params { - int fixed_freq; - unsigned char rates[NL80211_MAX_SUPP_RATES]; - int mcast_rate; -+ int ht_set; -+ unsigned int htmode; - - /** - * bg_scan_period - Background scan period in seconds, 0 to disable ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -7104,6 +7104,22 @@ retry: - NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); - } - -+ if (params->ht_set) { -+ switch(params->htmode) { -+ case NL80211_CHAN_HT20: -+ wpa_printf(MSG_DEBUG, " * ht=HT20"); -+ break; -+ case NL80211_CHAN_HT40PLUS: -+ wpa_printf(MSG_DEBUG, " * ht=HT40+"); -+ break; -+ case NL80211_CHAN_HT40MINUS: -+ wpa_printf(MSG_DEBUG, " * ht=HT40-"); -+ break; -+ } -+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, -+ params->htmode); -+ } -+ - ret = nl80211_set_conn_keys(params, msg); - if (ret) - goto nla_put_failure; ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -1408,6 +1408,71 @@ static char * wpa_config_write_mcast_rat - } - #endif /* NO_CONFIG_WRITE */ - -+static int wpa_config_parse_htmode(const struct parse_data *data, -+ struct wpa_ssid *ssid, int line, -+ const char *value) -+{ -+ int i; -+ static const struct { -+ const char *name; -+ unsigned int val; -+ } htmap[] = { -+ { .name = "HT20", .val = NL80211_CHAN_HT20, }, -+ { .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, }, -+ { .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, }, -+ { .name = "NOHT", .val = NL80211_CHAN_NO_HT, }, -+ }; -+ ssid->ht_set = 0;; -+ for (i = 0; i < 4; i++) { -+ if (strcasecmp(htmap[i].name, value) == 0) { -+ ssid->htmode = htmap[i].val; -+ ssid->ht_set = 1; -+ break; -+ } -+ } -+ -+ return 0; -+} -+ -+#ifndef NO_CONFIG_WRITE -+static char * wpa_config_write_htmode(const struct parse_data *data, -+ struct wpa_ssid *ssid) -+{ -+ char *value; -+ int res; -+ -+ value = os_malloc(6); /* longest: HT40+ */ -+ if (value == NULL) -+ return NULL; -+ -+ switch(ssid->htmode) { -+ case NL80211_CHAN_HT20: -+ res = os_snprintf(value, 4, "HT20"); -+ break; -+ case NL80211_CHAN_HT40PLUS: -+ res = os_snprintf(value, 5, "HT40+"); -+ break; -+ case NL80211_CHAN_HT40MINUS: -+ res = os_snprintf(value, 5, "HT40-"); -+ break; -+ case NL80211_CHAN_NO_HT: -+ res = os_snprintf(value, 4, "NOHT"); -+ break; -+ default: -+ os_free(value); -+ return NULL; -+ } -+ -+ if (res < 0) { -+ os_free(value); -+ return NULL; -+ } -+ -+ return value; -+} -+#endif /* NO_CONFIG_WRITE */ -+ -+ - static int wpa_config_parse_rates(const struct parse_data *data, - struct wpa_ssid *ssid, int line, - const char *value) -@@ -1669,6 +1734,7 @@ static const struct parse_data ssid_fiel - { INT_RANGE(fixed_freq, 0, 1) }, - { FUNC(rates) }, - { FUNC(mcast_rate) }, -+ { FUNC(htmode) }, - }; - - #undef OFFSET ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -605,6 +605,8 @@ struct wpa_ssid { - int fixed_freq; - unsigned char rates[NL80211_MAX_SUPP_RATES]; - double mcast_rate; -+ int ht_set; -+ unsigned int htmode; - }; - - #endif /* CONFIG_SSID_H */ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1613,6 +1613,8 @@ void wpa_supplicant_associate(struct wpa - i++; - } - params.mcast_rate = ssid->mcast_rate; -+ params.ht_set = ssid->ht_set; -+ params.htmode = ssid->htmode; - } - - params.wpa_ie = wpa_ie; diff --git a/package/hostapd/patches/610-max_num_sta_probe.patch b/package/hostapd/patches/610-max_num_sta_probe.patch deleted file mode 100644 index 141eb5b..0000000 --- a/package/hostapd/patches/610-max_num_sta_probe.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/src/ap/beacon.c -+++ b/src/ap/beacon.c -@@ -455,6 +455,10 @@ void handle_probe_req(struct hostapd_dat - return; - } - -+ if (!sta && hapd->num_sta >= hapd->conf->max_num_sta) -+ wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " ignored," -+ " too many connected stations.", MAC2STR(mgmt->sa)); -+ - #ifdef CONFIG_INTERWORKING - if (elems.interworking && elems.interworking_len >= 1) { - u8 ant = elems.interworking[0] & 0x0f; diff --git a/package/hostapd/patches/620-scan_wait.patch b/package/hostapd/patches/620-scan_wait.patch deleted file mode 100644 index ac2d445..0000000 --- a/package/hostapd/patches/620-scan_wait.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/hostapd/main.c -+++ b/hostapd/main.c -@@ -33,6 +33,8 @@ - extern int wpa_debug_level; - extern int wpa_debug_show_keys; - extern int wpa_debug_timestamp; -+static int daemonize = 0; -+static char *pid_file = NULL; - - extern struct wpa_driver_ops *wpa_drivers[]; - -@@ -147,6 +149,14 @@ static void hostapd_logger_cb(void *ctx, - } - #endif /* CONFIG_NO_HOSTAPD_LOGGER */ - -+static void hostapd_setup_complete_cb(void *ctx) -+{ -+ if (daemonize && os_daemonize(pid_file)) { -+ perror("daemon"); -+ return; -+ } -+ daemonize = 0; -+} - - /** - * hostapd_init - Allocate and initialize per-interface data -@@ -190,6 +200,7 @@ static struct hostapd_iface * hostapd_in - if (hapd == NULL) - goto fail; - hapd->msg_ctx = hapd; -+ hapd->setup_complete_cb = hostapd_setup_complete_cb; - } - - return hapd_iface; -@@ -429,8 +440,6 @@ static void hostapd_global_deinit(const - #endif /* CONFIG_NATIVE_WINDOWS */ - - eap_server_unregister_methods(); -- -- os_daemonize_terminate(pid_file); - } - - -@@ -456,11 +465,6 @@ static int hostapd_global_run(struct hap - } - #endif /* EAP_SERVER_TNC */ - -- if (daemonize && os_daemonize(pid_file)) { -- perror("daemon"); -- return -1; -- } -- - eloop_run(); - - return 0; -@@ -564,8 +568,7 @@ int main(int argc, char *argv[]) - struct hapd_interfaces interfaces; - int ret = 1; - size_t i; -- int c, debug = 0, daemonize = 0; -- char *pid_file = NULL; -+ int c, debug = 0; - const char *log_file = NULL; - const char *entropy_file = NULL; - diff --git a/package/hostapd/patches/630-bool_fix.patch b/package/hostapd/patches/630-bool_fix.patch deleted file mode 100644 index 510b000..0000000 --- a/package/hostapd/patches/630-bool_fix.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/src/ap/ieee802_1x.c -+++ b/src/ap/ieee802_1x.c -@@ -2043,9 +2043,9 @@ void ieee802_1x_notify_pre_auth(struct e - } - - --static const char * bool_txt(Boolean bool) -+static const char * bool_txt(Boolean bool_val) - { -- return bool ? "TRUE" : "FALSE"; -+ return bool_val ? "TRUE" : "FALSE"; - } - - #ifdef CONFIG_CTRL_IFACE_MIB diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile deleted file mode 100644 index e4fa925..0000000 --- a/package/mac80211/Makefile +++ /dev/null @@ -1,1630 +0,0 @@ -# -# Copyright (C) 2007-2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=mac80211 - -PKG_VERSION:=2013-06-27 -PKG_RELEASE:=1 -PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources -PKG_BACKPORT_VERSION:=.1 -PKG_MD5SUM:=73bd220c64c5c6fdc22b3bb7f180644f - -PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2 -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) -PKG_BUILD_PARALLEL:=1 - -PKG_MAINTAINER:=Felix Fietkau - -PKG_DRIVERS = \ - adm8211 ath5k libertas-usb libertas-sd p54-common p54-pci p54-usb p54-spi \ - rt2x00-lib rt2x00-pci rt2x00-usb rt2x00-soc rt2800-lib rt2400-pci \ - rt2500-pci rt2500-usb rt61-pci rt73-usb rt2800-pci rt2800-usb \ - rtl8180 rtl8187 zd1211rw mac80211-hwsim carl9170 b43 b43legacy \ - ath9k-common ath9k ath9k-htc ath net-libipw net-ipw2100 net-ipw2200 \ - mwl8k net-hermes net-hermes-pci net-hermes-plx net-hermes-pcmcia \ - iwl-legacy iwl3945 iwl4965 iwlagn wl12xx lib80211 - -PKG_CONFIG_DEPENDS:= \ - CONFIG_PACKAGE_kmod-mac80211 \ - $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \ - CONFIG_PACKAGE_MAC80211_DEBUGFS \ - CONFIG_PACKAGE_MAC80211_MESH \ - CONFIG_PACKAGE_ATH_DEBUG \ - CONFIG_PACKAGE_B43_DEBUG \ - CONFIG_PACKAGE_B43_PIO \ - CONFIG_PACKAGE_B43_N_PHY \ - CONFIG_ATH_USER_REGD \ - -CARL9170_FW_VERSION:=1.9.6 - -include $(INCLUDE_DIR)/package.mk - -WMENU:=Wireless Drivers - -define KernelPackage/mac80211/Default - SUBMENU:=$(WMENU) - URL:=http://linuxwireless.org/ - MAINTAINER:=Felix Fietkau - DEPENDS:=@(!(TARGET_avr32||TARGET_ps3||TARGET_pxcab)||BROKEN) -endef - -define KernelPackage/cfg80211 - $(call KernelPackage/mac80211/Default) - TITLE:=cfg80211 - wireless configuration API - DEPENDS+= +iw - FILES:= \ - $(PKG_BUILD_DIR)/compat/compat.ko \ - $(PKG_BUILD_DIR)/net/wireless/cfg80211.ko - AUTOLOAD:=$(call AutoLoad,20,compat cfg80211) -endef - -define KernelPackage/cfg80211/description -cfg80211 is the Linux wireless LAN (802.11) configuration API. -endef - -define KernelPackage/mac80211 - $(call KernelPackage/mac80211/Default) - TITLE:=Linux 802.11 Wireless Networking Stack - DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211 - KCONFIG:=\ - CONFIG_AVERAGE=y - FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko - AUTOLOAD:=$(call AutoLoad,21,mac80211) - MENU:=1 -endef - -define KernelPackage/mac80211/config - if PACKAGE_kmod-mac80211 - - config PACKAGE_MAC80211_DEBUGFS - bool "Export mac80211 internals in DebugFS" - select KERNEL_DEBUG_FS - select KERNEL_RELAY if PACKAGE_kmod-ath9k-common - default y - help - Select this to see extensive information about - the internal state of mac80211 in debugfs. - - config PACKAGE_MAC80211_MESH - bool "Enable 802.11s mesh support" - default y - - endif -endef - -define KernelPackage/mac80211/description -Generic IEEE 802.11 Networking Stack (mac80211) -endef - -PKG_LINUX_FIRMWARE_NAME:=linux-firmware -PKG_LINUX_FIRMWARE_VERSION:=6942dba419d2ebf8c15514972e89734fd7a8cebc -PKG_LINUX_FIRMWARE_SOURCE:=$(PKG_LINUX_FIRMWARE_NAME)-$(PKG_LINUX_FIRMWARE_VERSION).tar.bz2 -PKG_LINUX_FIRMWARE_PROTO:=git -PKG_LINUX_FIRMWARE_SOURCE_URL:=git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git -PKG_LINUX_FIRMWARE_SUBDIR:=$(PKG_LINUX_FIRMWARE_NAME)-$(PKG_LINUX_FIRMWARE_VERSION) -PKG_LINUX_FIRMWARE_MIRROR_MD5SUM:=a5f8c27af9e43f0ad24d7f821c5a781e - -define Download/linux-firmware - FILE:=$(PKG_LINUX_FIRMWARE_SOURCE) - URL:=$(PKG_LINUX_FIRMWARE_SOURCE_URL) - MD5SUM:=$(PKG_LINUX_FIRMWARE_MD5SUM) - PROTO:=$(PKG_LINUX_FIRMWARE_PROTO) - VERSION:=$(PKG_LINUX_FIRMWARE_VERSION) - SUBDIR:=$(PKG_LINUX_FIRMWARE_SUBDIR) - MIRROR_MD5SUM:=$(PKG_LINUX_FIRMWARE_MIRROR_MD5SUM) -endef -$(eval $(call Download,linux-firmware)) - -# Prism54 drivers -P54PCIFW:=2.13.12.0.arm -P54USBFW:=2.13.24.0.lm87.arm -P54SPIFW:=2.13.0.0.a.13.14.arm -CARL9170_FW:=carl9170-1.fw - -define Download/p54usb - FILE:=$(P54USBFW) - URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb - MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6 -endef -$(eval $(call Download,p54usb)) - -define Download/p54pci - FILE:=$(P54PCIFW) - URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac - MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4 -endef -$(eval $(call Download,p54pci)) - -define Download/p54spi - FILE:=$(P54SPIFW) - URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560 - MD5SUM:=42661f8ecbadd88012807493f596081d -endef -$(eval $(call Download,p54spi)) - -define Download/carl9170 - FILE:=$(CARL9170_FW)-$(CARL9170_FW_VERSION) - URL:=http://downloads.openwrt.org/sources/ - MD5SUM:=2fa6ed98d53d0b5fbcc136d1cf5e9609 -endef -$(eval $(call Download,carl9170)) - -define KernelPackage/p54/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Prism54 Drivers -endef - -define KernelPackage/p54/description - Kernel module for Prism54 chipsets (mac80211) -endef - -define KernelPackage/p54-common - $(call KernelPackage/p54/Default) - DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt - TITLE+= (COMMON) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko - AUTOLOAD:=$(call AutoLoad,30,p54common) -endef - -define KernelPackage/p54-pci - $(call KernelPackage/p54/Default) - TITLE+= (PCI) - DEPENDS+= @PCI_SUPPORT +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko - AUTOLOAD:=$(call AutoLoad,31,p54pci) -endef - -define KernelPackage/p54-usb - $(call KernelPackage/p54/Default) - TITLE+= (USB) - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko - AUTOLOAD:=$(call AutoLoad,31,p54usb) -endef - -define KernelPackage/p54-spi - $(call KernelPackage/p54/Default) - TITLE+= (SPI) - DEPENDS+= @TARGET_omap24xx +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko - AUTOLOAD:=$(call AutoLoad,31,p54spi) -endef - -define KernelPackage/rt2x00/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Ralink Drivers for RT2x00 cards -endef - -define KernelPackage/rt2x00-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t - TITLE+= (LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko - AUTOLOAD:=$(call AutoLoad,24,rt2x00lib) - MENU:=1 -endef - -define KernelPackage/rt2x00-lib/config - if PACKAGE_kmod-rt2x00-lib - - config PACKAGE_RT2X00_LIB_DEBUGFS - bool "Enable rt2x00 debugfs support" - depends on PACKAGE_MAC80211_DEBUGFS - help - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - - config PACKAGE_RT2X00_DEBUG - bool "Enable rt2x00 debug output" - help - Enable debugging output for all rt2x00 modules - - endif -endef - -define KernelPackage/rt2x00-mmio -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 - TITLE+= (MMIO) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko - AUTOLOAD:=$(call AutoLoad,25,rt2x00mmio) -endef - -define KernelPackage/rt2x00-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib - TITLE+= (PCI) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko - AUTOLOAD:=$(call AutoLoad,26,rt2x00pci) -endef - -define KernelPackage/rt2x00-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core - TITLE+= (USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko - AUTOLOAD:=$(call AutoLoad,26,rt2x00usb) -endef - -define KernelPackage/rt2x00-soc -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @TARGET_ramips @!TARGET_ramips_mt7620a @!TARGET_ramips_rt3883 +kmod-rt2x00-mmio +kmod-rt2x00-lib - TITLE+= (SoC) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko - AUTOLOAD:=$(call AutoLoad,26,rt2x00soc) -endef - -define KernelPackage/rt2800-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +TARGET_ramips:kmod-rt2x00-soc +@DRIVER_11N_SUPPORT - TITLE+= (rt2800 LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko - AUTOLOAD:=$(call AutoLoad,27,rt2800lib) -endef - -define KernelPackage/rt2400-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2400 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko - AUTOLOAD:=$(call AutoLoad,27,rt2400pci) -endef - -define KernelPackage/rt2500-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2500 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko - AUTOLOAD:=$(call AutoLoad,27,rt2500pci) -endef - -define KernelPackage/rt2500-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT2500 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko - AUTOLOAD:=$(call AutoLoad,27,rt2500usb) -endef - -define KernelPackage/rt61-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2x61 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko - AUTOLOAD:=$(call AutoLoad,27,rt61pci) -endef - -define KernelPackage/rt73-usb - $(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT73 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko - AUTOLOAD:=$(call AutoLoad,27,rt73usb) -endef - -define KernelPackage/rt2800-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +PCI_SUPPORT:kmod-rt2x00-pci +kmod-rt2800-lib +kmod-lib-crc-ccitt +TARGET_ramips:kmod-rt2x00-soc - TITLE+= (RT2860 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko - AUTOLOAD:=$(call AutoLoad,28,rt2800pci) -endef - -define KernelPackage/rt2800-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt - TITLE+= (RT2870 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko - AUTOLOAD:=$(call AutoLoad,28,rt2800usb) -endef - -define KernelPackage/rtl818x/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek Drivers for RTL818x devices - URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187 - DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 -endef - -define KernelPackage/rtl8180 - $(call KernelPackage/rtl818x/Default) - DEPENDS+= @PCI_SUPPORT - TITLE+= (RTL8180 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180/rtl8180.ko - AUTOLOAD:=$(call AutoLoad,27,rtl8180) -endef - -define KernelPackage/rtl8187 -$(call KernelPackage/rtl818x/Default) - DEPENDS+= @USB_SUPPORT +kmod-usb-core - TITLE+= (RTL8187 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko - AUTOLOAD:=$(call AutoLoad,27,rtl8187) -endef - -ZD1211FW_NAME:=zd1211-firmware -ZD1211FW_VERSION:=1.4 -define Download/zd1211rw - FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 - URL:=@SF/zd1211/ - MD5SUM:=19f28781d76569af8551c9d11294c870 -endef -$(eval $(call Download,zd1211rw)) - -define KernelPackage/zd1211rw - $(call KernelPackage/mac80211/Default) - TITLE:=Zydas ZD1211 support - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko - AUTOLOAD:=$(call AutoLoad,60,zd1211rw) -endef - -define KernelPackage/adm8211 - $(call KernelPackage/mac80211/Default) - TITLE:=ADMTek 8211 support - DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko - AUTOLOAD:=$(call AutoLoad,60,adm8211) -endef - -define KernelPackage/ath/config - if PACKAGE_kmod-ath - config ATH_USER_REGD - bool "Force Atheros drivers to respect the user's regdomain settings" - help - Atheros' idea of regulatory handling is that the EEPROM of the card defines - the regulatory limits and the user is only allowed to restrict the settings - even further, even if the country allows frequencies or power levels that - are forbidden by the EEPROM settings. - - Select this option if you want the driver to respect the user's decision about - regulatory settings. - - config PACKAGE_ATH_DEBUG - bool "Atheros wireless debugging" - help - Say Y, if you want to debug atheros wireless drivers. - Right now only ath9k makes use of this. - endif -endef - -define KernelPackage/ath - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros common driver part - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_atheros +kmod-mac80211 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko - AUTOLOAD:=$(call AutoLoad,26,ath) - MENU:=1 -endef - -define KernelPackage/ath/description - This module contains some common parts needed by Atheros Wireless drivers. -endef - -define KernelPackage/ath5k - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 5xxx wireless cards support - URL:=http://linuxwireless.org/en/users/Drivers/ath5k - DEPENDS+= @PCI_SUPPORT||@TARGET_atheros +kmod-ath - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko - AUTOLOAD:=$(call AutoLoad,27,ath5k) -endef - -define KernelPackage/ath5k/description - This module adds support for wireless adapters based on - Atheros 5xxx chipset. -endef - -define KernelPackage/ath9k-common - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) - URL:=http://linuxwireless.org/en/users/Drivers/ath9k - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko - AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common) -endef - -define KernelPackage/ath9k - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n PCI wireless cards support - URL:=http://linuxwireless.org/en/users/Drivers/ath9k - DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko - AUTOLOAD:=$(call AutoLoad,28,ath9k) -endef - -define KernelPackage/ath9k/description -This module adds support for wireless adapters based on -Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. -endef - -define KernelPackage/ath9k-htc - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n USB device support - URL:=http://linuxwireless.org/en/users/Drivers/ath9k - DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko - AUTOLOAD:=$(call AutoLoad,55,ath9k_htc) -endef - -define KernelPackage/ath9k-htc/description -This module adds support for wireless adapters based on -Atheros USB AR9271 and AR7010 family of chipsets. -endef - -define KernelPackage/carl9170 - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Atheros AR9170 USB sticks - DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko - AUTOLOAD:=$(call AutoLoad,60,carl9170) -endef - -define KernelPackage/carl9170/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(CARL9170_FW)-$(CARL9170_FW_VERSION) $(1)/lib/firmware/$(CARL9170_FW) -endef - -define KernelPackage/lib80211 - $(call KernelPackage/mac80211/Default) - TITLE:=802.11 Networking stack - FILES:= \ - $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko - AUTOLOAD:=$(call AutoLoad,21, \ - lib80211 \ - lib80211_crypt_wep \ - lib80211_crypt_ccmp \ - lib80211_crypt_tkip \ - ) -endef - -define KernelPackage/lib80211/description - Kernel modules for 802.11 Networking stack - Includes: - - lib80211 - - lib80211_crypt_wep - - lib80211_crypt_tkip - - lib80211_crytp_ccmp -endef - -define KernelPackage/libertas-usb - $(call KernelPackage/mac80211/Default) - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT - TITLE:=Marvell 88W8015 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko - AUTOLOAD:=$(call AutoLoad,27,libertas usb8xxx) -endef - -define KernelPackage/libertas-sd - $(call KernelPackage/mac80211/Default) - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT - TITLE:=Marvell 88W8686 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko - AUTOLOAD:=$(call AutoLoad,91,libertas libertas_sdio) -endef - -define KernelPackage/mac80211-hwsim - $(call KernelPackage/mac80211/Default) - TITLE:=mac80211 HW simulation device - DEPENDS+= +kmod-mac80211 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko - AUTOLOAD:=$(call AutoLoad,60,mac80211_hwsim) -endef - -define KernelPackage/net-libipw - $(call KernelPackage/mac80211/Default) - TITLE:=libipw for ipw2100 and ipw2200 - DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko - AUTOLOAD:=$(call AutoLoad,49,libipw) -endef - -define KernelPackage/net-libipw/description - Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. -endef - -IPW2100_NAME:=ipw2100-fw -IPW2100_VERSION:=1.3 - -define Download/net-ipw2100 - URL:=http://bughost.org/firmware/ - FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz - MD5SUM=46aa75bcda1a00efa841f9707bbbd113 -endef -$(eval $(call Download,net-ipw2100)) - -define KernelPackage/net-ipw2100 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2100 driver - DEPENDS:=@PCI_SUPPORT +kmod-net-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko - AUTOLOAD:=$(call AutoLoad,50,ipw2100) -endef - -define KernelPackage/net-ipw2100/description - Kernel support for Intel IPW2100 - Includes: - - ipw2100 -endef - -IPW2200_NAME:=ipw2200-fw -IPW2200_VERSION:=3.1 - -define Download/net-ipw2200 - URL:=http://bughost.org/firmware/ - FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz - MD5SUM=eaba788643c7cc7483dd67ace70f6e99 -endef -$(eval $(call Download,net-ipw2200)) - -define KernelPackage/net-ipw2200 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2200 driver - DEPENDS:=@PCI_SUPPORT +kmod-net-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko - AUTOLOAD:=$(call AutoLoad,50,ipw2200) -endef - -define KernelPackage/net-ipw2200/description - Kernel support for Intel IPW2200 - Includes: - - ipw2200 -endef - - -define KernelPackage/net-hermes - $(call KernelPackage/mac80211/Default) - TITLE:=Hermes 802.11b chipset support - DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko - AUTOLOAD:=$(call AutoLoad,50,orinoco) -endef - -define KernelPackage/net-hermes/description - Kernel support for Hermes 802.11b chipsets -endef - -define KernelPackage/net-hermes-pci - $(call KernelPackage/mac80211/Default) - TITLE:=Intersil Prism 2.5 PCI support - DEPENDS:=@PCI_SUPPORT +kmod-net-hermes - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko - AUTOLOAD:=$(call AutoLoad,55,orinoco_pci) -endef - -define KernelPackage/net-hermes-pci/description - Kernel modules for Intersil Prism 2.5 PCI support -endef - -define KernelPackage/net-hermes-plx - $(call KernelPackage/mac80211/Default) - TITLE:=PLX9052 based PCI adaptor - DEPENDS:=@PCI_SUPPORT +kmod-net-hermes - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko - AUTOLOAD:=$(call AutoLoad,55,orinoco_plx) -endef - -define KernelPackage/net-hermes-plx/description - Kernel modules for Hermes in PLX9052 based PCI adaptors -endef - -define KernelPackage/net-hermes-pcmcia - $(call KernelPackage/mac80211/Default) - TITLE:=Hermes based PCMCIA adaptors - DEPENDS:=@PCMCIA_SUPPORT +kmod-net-hermes @BROKEN - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko - AUTOLOAD:=$(call AutoLoad,55,orinoco_cs) -endef - -define KernelPackage/net-hermes-pcmcia/description - Kernel modules for Hermes based PCMCIA adaptors -endef - -define KernelPackage/iwlagn - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT - TITLE:=Intel AGN Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko - AUTOLOAD:=$(call AutoLoad,60,iwlwifi) - MENU:=1 -endef - -define KernelPackage/iwlagn/description - iwlagn kernel module for Intel 5000/5150/1000/6000/6050/6005/6030/100 support -endef - -define KernelPackage/iwlagn/config - if PACKAGE_kmod-iwlagn - - config IWL5000_FW - bool "Intel 5000 Firmware" - default y - help - Download and install firmware for: - Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN - - config IWL5150_FW - bool "Intel 5150 Firmware" - default y - help - Download and install firmware for: - Intel Wireless WiFi 5150AGN - - config IWL1000_FW - bool "Intel 1000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 1000 - - config IWL6000_FW - bool "Intel 6000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Ultimate-N 6300 and Advanced-N 6200 - - config IWL6050_FW - bool "Intel 6050 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150 - - config IWL6005_FW - bool "Intel 6005 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N 6205 - - config IWL6030_FW - bool "Intel 6030 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235 - - config IWL100_FW - bool "Intel 100 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 100 - - config IWL2000_FW - bool "Intel 2000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 2200 - - config IWL2030_FW - bool "Intel 2030 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 2230 - - config IWL105_FW - bool "Intel 105 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 105 - - config IWL135_FW - bool "Intel 135 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 135 - endif -endef - -define KernelPackage/iwl-legacy - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT - TITLE:=Intel legacy Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwlegacy.ko - AUTOLOAD:=$(call AutoLoad,60,iwlegacy) -endef - -define KernelPackage/iwl-legacy/description - iwl-legacy kernel module for legacy Intel wireless support -endef - -define KernelPackage/iwl3945 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy - TITLE:=Intel iwl3945 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko - AUTOLOAD:=$(call AutoLoad,61,iwl3945) -endef - -define KernelPackage/iwl3945/description - iwl3945 kernel module for Intel 3945 support -endef - -define KernelPackage/iwl4965 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT - TITLE:=Intel iwl4965 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko - AUTOLOAD:=$(call AutoLoad,61,iwl4965) -endef - -define KernelPackage/iwl4965/description - iwl4965 kernel module for Intel 4965 support -endef - - -define KernelPackage/mwl8k - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards - URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k - DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko - AUTOLOAD:=$(call AutoLoad,27,mwl8k) -endef - -define KernelPackage/mwl8k/description - Kernel modules for Marvell TOPDOG 802.11 Wireless cards -endef - - -define KernelPackage/wl12xx - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for TI WL12xx - URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx - DEPENDS+= @TARGET_omap4 +kmod-mac80211 - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko - AUTOLOAD:=$(call AutoLoad,61,wlcore wlcore_sdio wl12xx) -endef - -define KernelPackage/wl12xx/description - Kernel modules for TI WL12xx -endef - -#Broadcom firmware -ifneq ($(CONFIG_B43_FW_5_10),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.10.56.27.3 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac -else -ifneq ($(CONFIG_B43_FW_4_178),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.178.10.4 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb -else -ifneq ($(CONFIG_B43_FW_5_100_138),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.100.138 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ - PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555 -else - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.150.10.5 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60 -endif -endif -endif -ifneq ($(CONFIG_B43_OPENFIRMWARE),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.2 - PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) - PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz - PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/ - PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa -endif - - -PKG_B43_FWV3_NAME:=wl_apsta -PKG_B43_FWV3_VERSION:=3.130.20.0 -PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o -PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/ -PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3 - -define Download/b43 - FILE:=$(PKG_B43_FWV4_SOURCE) - URL:=$(PKG_B43_FWV4_SOURCE_URL) - MD5SUM:=$(PKG_B43_FWV4_MD5SUM) -endef -$(eval $(call Download,b43)) - -define Download/b43legacy - FILE:=$(PKG_B43_FWV3_SOURCE) - URL:=$(PKG_B43_FWV3_SOURCE_URL) - MD5SUM:=$(PKG_B43_FWV3_MD5SUM) -endef -$(eval $(call Download,b43legacy)) - - -define KernelPackage/b43 - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx wireless support - URL:=http://linuxwireless.org/en/users/Drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - DEPENDS+= +kmod-mac80211 +!TARGET_brcm47xx:kmod-bcma +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko - AUTOLOAD:=$(call AutoLoad,30,b43) - MENU:=1 -endef - -define KernelPackage/b43/config - if PACKAGE_kmod-b43 - - choice - prompt "b43 firmware version" - default B43_FW_5_100_138 - help - This option allows you to select the version of the b43 firmware. - - config B43_FW_4_150 - bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" - help - Stable firmware for BCM43xx devices. - - If unsure, select this. - - config B43_FW_4_178 - bool "Firmware 478.104 from driver 4.178.10.4" - help - Experimental firmware for BCM43xx devices. - - This firmware is not tested as much as the "stable" firmware. - - If unsure, select the "stable" firmware. - - config B43_FW_5_10 - bool "Firmware 508.1084 from driver 5.10.56.27" - help - Newer experimental firmware for BCM43xx devices. - - This firmware is mostly untested. It is needed for some N-PHY devices. - - If unsure, select the "stable" firmware. - - config B43_FW_5_100_138 - bool "Firmware 666.2 from driver 5.100.138 (stable)" - help - Newer experimental firmware for BCM43xx devices. - - This firmware is mostly untested. It is needed for some N-PHY devices. - - If unsure, select the "stable" firmware. - - config B43_OPENFIRMWARE - bool "Open FirmWare for WiFi networks" - help - Opensource firmware for BCM43xx devices. - - Do _not_ select this, unless you know what you are doing. - The Opensource firmware is not suitable for embedded devices, yet. - It does not support QoS, which is bad for AccessPoints. - It does not support hardware crypto acceleration, which is a showstopper - for embedded devices with low CPU resources. - - If unsure, select the "stable" firmware. - - endchoice - - config B43_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on !B43_OPENFIRMWARE - default y - help - This options allows you to remove unnecessary b43 firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 200k. - - If unsure, say Y. - - config B43_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on B43_FW_SQUASH - default "5,6,7,8,9,10,11,13,15,16,29" - help - This is a comma seperated list of core revision numbers. - - Example (keep files for rev5 only): - 5 - - Example (keep files for rev5 and rev11): - 5,11 - - config B43_FW_SQUASH_PHYTYPES - string "PHY types to include" - depends on B43_FW_SQUASH - default "G,LP,N,HT" - help - This is a comma seperated list of PHY types: - A => A-PHY - AG => Dual A-PHY G-PHY - G => G-PHY - LP => LP-PHY - N => N-PHY - HT => HT-PHY - LCN => LCN-PHY - - Example (keep files for G-PHY only): - G - - Example (keep files for G-PHY and N-PHY): - G,N - - config PACKAGE_B43_DEBUG - bool "Enable debug output and debugfs for b43" - default n - help - Enable additional debug output and runtime sanity checks for b43 - and enables the debugfs interface. - - If unsure, say N. - - config PACKAGE_B43_PIO - bool "Enable support for PIO transfer mode" - default n - help - Enable support for using PIO instead of DMA. Unless you have DMA - transfer problems you don't need this. - - If unsure, say N. - - config PACKAGE_B43_PHY_N - bool "Enable support for N-PHYs" - default y - help - Enable support for N-PHY. This includes support for the following devices: - PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 - SoC: BCM4716, BCM4717, BCM4718 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_HT - bool "Enable support for HT-PHYs" - default y - help - Enable support for HT-PHY. This includes support for the following devices: - PCI: BCM4331 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_LCN - bool "Enable support for LCN-PHYs" - depends on BROKEN - default n - help - Currently broken. - - If unsure, say N. - - endif -endef - -define KernelPackage/b43/description -Kernel module for Broadcom 43xx wireless support (mac80211 stack) new -endef - -define KernelPackage/b43legacy - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx-legacy wireless support - URL:=http://linuxwireless.org/en/users/Drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko - AUTOLOAD:=$(call AutoLoad,30,b43legacy) - MENU:=1 -endef - -define KernelPackage/b43legacy/config - if PACKAGE_kmod-b43legacy - - config B43LEGACY_FW_SQUASH - bool "Remove unnecessary firmware files" - default y - help - This options allows you to remove unnecessary b43legacy firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 50k. - - If unsure, say Y. - - config B43LEGACY_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on B43LEGACY_FW_SQUASH - default "1,2,3,4" - help - This is a comma seperated list of core revision numbers. - - Example (keep files for rev4 only): - 4 - - Example (keep files for rev2 and rev4): - 2,4 - - endif -endef - -define KernelPackage/b43legacy/description -Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new -endef - - -define KernelPackage/brcmutil - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n common driver parts - URL:=http://linuxwireless.org/en/users/Drivers/brcm80211 - DEPENDS+=@PCI_SUPPORT||USB_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko - AUTOLOAD:=$(call AutoLoad,30,brcmutil) - MENU:=1 -endef - -define KernelPackage/brcmutil/description - This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. -endef - -define KernelPackage/brcmutil/config - if PACKAGE_kmod-brcmutil - - config PACKAGE_BRCM80211_DEBUG - bool "Broadcom wireless driver debugging" - help - Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. - - endif -endef - -PKG_BRCMSMAC_FW_NAME:=broadcom-wl -PKG_BRCMSMAC_FW_VERSION:=5.100.138 -PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o -PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 -PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ -PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555 - -define Download/brcmsmac - FILE:=$(PKG_BRCMSMAC_FW_SOURCE) - URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) - MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM) -endef -$(eval $(call Download,brcmsmac)) - -define KernelPackage/brcmsmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver - URL:=http://linuxwireless.org/en/users/Drivers/brcm80211 - DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko - AUTOLOAD:=$(call AutoLoad,31,brcmsmac) - MENU:=1 -endef - -define KernelPackage/brcmsmac/description - Kernel module for Broadcom IEEE802.11n PCIe Wireless cards -endef - -define KernelPackage/brcmsmac/config - if PACKAGE_kmod-brcmsmac - - config BRCMSMAC_USE_FW_FROM_WL - bool "Use firmware extracted from broadcom proprietary driver" - default y - help - Instead of using the official brcmsmac firmware a firmware - version 666.2 extracted from the proprietary Broadcom driver - is used. This is needed to get core rev 17 used in bcm4716 - to work. - - If unsure, say Y. - - endif -endef - - -define KernelPackage/brcmfmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver - URL:=http://linuxwireless.org/en/users/Drivers/brcm80211 - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko - AUTOLOAD:=$(call AutoLoad,60,brcmfmac) -endef - -define KernelPackage/brcmfmac/description - Kernel module for Broadcom IEEE802.11n USB Wireless cards -endef - -config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) - -config-y:= \ - WLAN \ - NL80211_TESTMODE \ - CFG80211_WEXT \ - CFG80211_INTERNAL_REGDB \ - MAC80211_RC_MINSTREL \ - MAC80211_RC_MINSTREL_HT \ - MAC80211_RC_DEFAULT_MINSTREL \ - -config-$(call config_package,cfg80211) += CFG80211 - -config-$(call config_package,mac80211) += MAC80211 -config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH -ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS - config-y += \ - CFG80211_DEBUGFS \ - MAC80211_DEBUGFS \ - ATH9K_DEBUGFS \ - ATH9K_HTC_DEBUGFS \ - CARL9170_DEBUGFS \ - ATH5K_DEBUG -endif - -config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP - -config-$(call config_package,ath) += ATH_CARDS ATH_COMMON -config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG - -config-$(call config_package,ath9k) += ATH9K -config-$(call config_package,ath9k-common) += ATH9K_COMMON -config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB -config-$(CONFIG_PCI) += ATH9K_PCI -config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD - -config-$(call config_package,ath9k-htc) += ATH9K_HTC - -config-$(call config_package,ath5k) += ATH5K -ifdef CONFIG_TARGET_atheros - config-y += ATH5K_AHB -else - config-y += ATH5K_PCI -endif - -config-$(call config_package,carl9170) += CARL9170 - -config-$(call config_package,b43) += B43 -config-y += B43_SSB B43_BCMA B43_PHY_LP -config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N -config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT -config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO -config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG - -config-$(call config_package,b43legacy) += B43LEGACY -config-y += B43LEGACY_DMA_MODE - -config-$(call config_package,brcmutil) += BRCMUTIL -config-$(call config_package,brcmsmac) += BRCMSMAC -config-$(call config_package,brcmfmac) += BRCMFMAC BRCMFMAC_USB -config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG - -config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM - -config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB -config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI -config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO -config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB -config-$(call config_package,rt2x00-soc) += RT2X00_LIB_SOC -config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS -config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG - -config-$(call config_package,rt2400-pci) += RT2400PCI -config-$(call config_package,rt2500-pci) += RT2500PCI -config-$(call config_package,rt2500-usb) += RT2500USB -config-$(call config_package,rt61-pci) += RT61PCI -config-$(call config_package,rt73-usb) += RT73USB - -config-$(call config_package,rt2800-lib) += RT2800_LIB -config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 - -config-$(call config_package,rt2800-pci) += RT2800PCI -config-$(call config_package,rt2800-usb) += RT2800USB - -config-$(call config_package,iwl-legacy) += IWLEGACY -config-$(call config_package,iwl3945) += IWL3945 -config-$(call config_package,iwl4965) += IWL4965 -config-$(call config_package,iwlagn) += IWLWIFI - -config-$(call config_package,net-libipw) += LIBIPW -config-$(call config_package,net-ipw2100) += IPW2100 -config-$(call config_package,net-ipw2200) += IPW2200 - -config-$(call config_package,p54-common) += P54_COMMON -config-$(call config_package,p54-pci) += P54_PCI -config-$(call config_package,p54-usb) += P54_USB -config-$(call config_package,p54-spi) += P54_SPI - -config-$(call config_package,net-hermes) += HERMES -config-$(call config_package,net-hermes-pci) += PCI_HERMES -config-$(call config_package,net-hermes-plx) += PLX_HERMES -config-$(call config_package,net-hermes-pcmcia) += PCMCIA_HERMES -config-y += HERMES_PRISM - -config-$(call config_package,adm8211) += ADM8211 -config-$(call config_package,libertas-sd) += LIBERTAS LIBERTAS_SDIO -config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB -config-$(call config_package,mwl8k) += MWL8K -config-$(call config_package,rtl8180) += RTL8180 -config-$(call config_package,rtl8187) += RTL8187 -config-$(call config_package,wl12xx) += WL_TI WLCORE WLCORE_SDIO WL12XX -config-$(call config_package,zd1211rw) += ZD1211RW - -config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS - -MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ - CROSS_COMPILE="$(KERNEL_CROSS)" \ - ARCH="$(LINUX_KARCH)" \ - EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include" \ - KLIB_BUILD="$(LINUX_DIR)" \ - MODPROBE=true \ - KLIB=$(TARGET_MODULES_DIR) \ - KERNEL_SUBLEVEL=$(lastword $(subst ., ,$(KERNEL_PATCHVER))) \ - KBUILD_LDFLAGS_MODULE_PREREQ= - -define ConfigVars -$(subst $(space),,$(foreach opt,$(config-$(1)),CPTCFG_$(opt)=$(1) -)) -endef - -define mac80211_config -$(call ConfigVars,m)$(call ConfigVars,y) -endef -$(eval $(call shexport,mac80211_config)) - -define Build/Prepare - rm -rf $(PKG_BUILD_DIR) - mkdir -p $(PKG_BUILD_DIR) - $(PKG_UNPACK) - $(Build/Patch) - $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz - $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz - $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 - $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE) - rm -rf \ - $(PKG_BUILD_DIR)/include/linux/ssb \ - $(PKG_BUILD_DIR)/include/linux/bcma \ - $(PKG_BUILD_DIR)/include/net/bluetooth - - rm -f \ - $(PKG_BUILD_DIR)/include/linux/cordic.h \ - $(PKG_BUILD_DIR)/include/linux/crc8.h \ - $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \ - $(PKG_BUILD_DIR)/include/linux/wl12xx.h \ - $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \ - $(PKG_BUILD_DIR)/include/net/ieee80211.h - - echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version - $(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt -endef - -ifneq ($(CONFIG_PACKAGE_kmod-cfg80211)$(CONFIG_PACKAGE_kmod-lib80211),) - define Build/Compile/kmod - rm -rf $(PKG_BUILD_DIR)/modules - +$(MAKE) $(PKG_JOBS) $(MAKE_OPTS) modules - endef -endif - -define Build/Configure - cmp $(PKG_BUILD_DIR)/include/linux/ath9k_platform.h $(LINUX_DIR)/include/linux/ath9k_platform.h - cmp $(PKG_BUILD_DIR)/include/linux/ath5k_platform.h $(LINUX_DIR)/include/linux/ath5k_platform.h - cmp $(PKG_BUILD_DIR)/include/linux/rt2x00_platform.h $(LINUX_DIR)/include/linux/rt2x00_platform.h -endef - -define Build/Compile - $(SH_FUNC) var2file "$(call shvar,mac80211_config)" $(PKG_BUILD_DIR)/.config - $(MAKE) $(MAKE_OPTS) allnoconfig - $(call Build/Compile/kmod) -endef - -define Build/InstallDev - mkdir -p \ - $(1)/usr/include/mac80211 \ - $(1)/usr/include/mac80211-backport \ - $(1)/usr/include/mac80211/ath \ - $(1)/usr/include/net/mac80211 - $(CP) $(PKG_BUILD_DIR)/net/mac80211/*.h $(PKG_BUILD_DIR)/include/* $(1)/usr/include/mac80211/ - $(CP) $(PKG_BUILD_DIR)/backport-include/* $(1)/usr/include/mac80211-backport/ - $(CP) $(PKG_BUILD_DIR)/net/mac80211/rate.h $(1)/usr/include/net/mac80211/ - $(CP) $(PKG_BUILD_DIR)/drivers/net/wireless/ath/*.h $(1)/usr/include/mac80211/ath/ -endef - -define KernelPackage/libertas-usb/install - $(INSTALL_DIR) $(1)/lib/firmware/libertas - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8388_v9.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8682.bin \ - $(1)/lib/firmware/libertas/ -endef - -define KernelPackage/libertas-sd/install - $(INSTALL_DIR) $(1)/lib/firmware/libertas - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688.bin \ - $(1)/lib/firmware/libertas -endef - -define KernelPackage/cfg80211/install - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi -endef - -define KernelPackage/p54-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci -endef - -define KernelPackage/p54-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb -endef - -define KernelPackage/p54-spi/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm -endef - -define KernelPackage/rt61-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561s.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2661.bin \ - $(1)/lib/firmware/ -endef - -define KernelPackage/rt73-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt73.bin $(1)/lib/firmware/ -endef - -define KernelPackage/rt2800-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2860.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt3290.bin \ - $(1)/lib/firmware -endef - -define KernelPackage/rt2800-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2870.bin $(1)/lib/firmware/ -endef - -define KernelPackage/wl12xx/install - $(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-mr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-plt.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-sr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl1271-nvs.bin \ - $(1)/lib/firmware/ti-connectivity -endef - - -define KernelPackage/zd1211rw/install - $(INSTALL_DIR) $(1)/lib/firmware/zd1211 - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 -endef - -define KernelPackage/ath9k-htc/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_9271.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_7010.fw \ - $(1)/lib/firmware/ -endef - -define KernelPackage/mwl8k/install - $(INSTALL_DIR) $(1)/lib/firmware/mwl8k - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366_ap-3.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8366.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8687.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8687.fw \ - $(1)/lib/firmware/mwl8k/ -endef - -define KernelPackage/net-ipw2100/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware -endef - -define KernelPackage/net-ipw2200/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware -endef - -define KernelPackage/iwlagn/install - $(INSTALL_DIR) $(1)/lib/firmware -ifneq ($(CONFIG_IWL5000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL5150_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL1000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6050_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6005_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6030_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL100_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-100-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL2000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL2030_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL105_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-105-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL135_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-135-6.ucode $(1)/lib/firmware -endif -endef - -define KernelPackage/iwl3945/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware -endef - -define KernelPackage/iwl4965/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware -endef - -define KernelPackage/b43/install - rm -rf $(1)/lib/firmware/ -ifeq ($(CONFIG_B43_OPENFIRMWARE),y) - tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)" -else - tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)" -endif - $(INSTALL_DIR) $(1)/lib/firmware/ -ifeq ($(CONFIG_B43_OPENFIRMWARE),y) - $(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/" - $(INSTALL_DIR) $(1)/lib/firmware/b43-open/ - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw -else - b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT) -endif -ifneq ($(CONFIG_B43_FW_SQUASH),) - b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43" -endif -endef - -define KernelPackage/b43legacy/install - $(INSTALL_DIR) $(1)/lib/firmware/ - b43-fwcutter --unsupported -w $(1)/lib/firmware/ $(DL_DIR)/$(PKG_B43_FWV3_SOURCE) -ifneq ($(CONFIG_B43LEGACY_FW_SQUASH),) - b43-fwsquash.py "G" "$(CONFIG_B43LEGACY_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43legacy" -endif -endef - -define KernelPackage/brcmsmac/install - $(INSTALL_DIR) $(1)/lib/firmware/brcm -ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) - tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" - b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) -else - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx-0.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx_hdr-0.fw \ - $(1)/lib/firmware/brcm/ -endif -endef - -define KernelPackage/brcmfmac/install - $(INSTALL_DIR) $(1)/lib/firmware/brcm - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43236b.bin \ - $(1)/lib/firmware/brcm/ -endef - -$(eval $(call KernelPackage,adm8211)) -$(eval $(call KernelPackage,ath5k)) -$(eval $(call KernelPackage,lib80211)) -$(eval $(call KernelPackage,libertas-usb)) -$(eval $(call KernelPackage,libertas-sd)) -$(eval $(call KernelPackage,cfg80211)) -$(eval $(call KernelPackage,mac80211)) -$(eval $(call KernelPackage,p54-common)) -$(eval $(call KernelPackage,p54-pci)) -$(eval $(call KernelPackage,p54-usb)) -$(eval $(call KernelPackage,p54-spi)) -$(eval $(call KernelPackage,rt2x00-lib)) -$(eval $(call KernelPackage,rt2x00-mmio)) -$(eval $(call KernelPackage,rt2x00-pci)) -$(eval $(call KernelPackage,rt2x00-usb)) -$(eval $(call KernelPackage,rt2x00-soc)) -$(eval $(call KernelPackage,rt2800-lib)) -$(eval $(call KernelPackage,rt2400-pci)) -$(eval $(call KernelPackage,rt2500-pci)) -$(eval $(call KernelPackage,rt2500-usb)) -$(eval $(call KernelPackage,rt61-pci)) -$(eval $(call KernelPackage,rt73-usb)) -$(eval $(call KernelPackage,rt2800-pci)) -$(eval $(call KernelPackage,rt2800-usb)) -$(eval $(call KernelPackage,rtl8180)) -$(eval $(call KernelPackage,rtl8187)) -$(eval $(call KernelPackage,zd1211rw)) -$(eval $(call KernelPackage,mac80211-hwsim)) -$(eval $(call KernelPackage,ath9k-common)) -$(eval $(call KernelPackage,ath9k)) -$(eval $(call KernelPackage,ath9k-htc)) -$(eval $(call KernelPackage,ath)) -$(eval $(call KernelPackage,carl9170)) -$(eval $(call KernelPackage,b43)) -$(eval $(call KernelPackage,b43legacy)) -$(eval $(call KernelPackage,brcmutil)) -$(eval $(call KernelPackage,brcmsmac)) -$(eval $(call KernelPackage,brcmfmac)) -$(eval $(call KernelPackage,net-libipw)) -$(eval $(call KernelPackage,net-ipw2100)) -$(eval $(call KernelPackage,net-ipw2200)) -$(eval $(call KernelPackage,iwlagn)) -$(eval $(call KernelPackage,iwl-legacy)) -$(eval $(call KernelPackage,iwl4965)) -$(eval $(call KernelPackage,iwl3945)) -$(eval $(call KernelPackage,mwl8k)) -$(eval $(call KernelPackage,net-hermes)) -$(eval $(call KernelPackage,net-hermes-pci)) -$(eval $(call KernelPackage,net-hermes-plx)) -$(eval $(call KernelPackage,net-hermes-pcmcia)) -$(eval $(call KernelPackage,wl12xx)) diff --git a/package/mac80211/files/lib/wifi/mac80211.sh b/package/mac80211/files/lib/wifi/mac80211.sh deleted file mode 100644 index 20f6bfa..0000000 --- a/package/mac80211/files/lib/wifi/mac80211.sh +++ /dev/null @@ -1,641 +0,0 @@ -#!/bin/sh -append DRIVERS "mac80211" - -mac80211_hostapd_setup_base() { - local phy="$1" - local ifname="$2" - - cfgfile="/var/run/hostapd-$phy.conf" - - config_get device "$vif" device - config_get country "$device" country - config_get hwmode "$device" hwmode - config_get channel "$device" channel - config_get beacon_int "$device" beacon_int - config_get basic_rate_list "$device" basic_rate - config_get_bool noscan "$device" noscan - - hostapd_set_log_options base_cfg "$device" - - [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" - - [ "$channel" = auto ] && { - channel=$(iw phy "$phy" info | \ - sed -ne '/MHz/ { /disabled\|passive\|radar/d; s/.*\[//; s/\].*//; p; q }') - config_set "$device" channel "$channel" - } - - [ -n "$hwmode" ] && { - config_get hwmode_11n "$device" hwmode_11n - [ -n "$hwmode_11n" ] && { - hwmode="$hwmode_11n" - append base_cfg "ieee80211n=1" "$N" - config_get htmode "$device" htmode - config_get ht_capab_list "$device" ht_capab - case "$htmode" in - HT20|HT40+|HT40-) ht_capab="[$htmode]";; - *)ht_capab=;; - esac - for cap in $ht_capab_list; do - ht_capab="$ht_capab[$cap]" - done - [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N" - } - } - - local country_ie=0 - [ -n "$country" ] && country_ie=1 - config_get_bool country_ie "$device" country_ie "$country_ie" - [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N" - - local br brval brstr - [ -n "$basic_rate_list" ] && { - for br in $basic_rate_list; do - brval="$(($br / 100))" - [ -n "$brstr" ] && brstr="$brstr " - brstr="$brstr$brval" - done - } - - cat >> "$cfgfile" <