From: Ludwig Thomeczek Date: Sat, 22 Apr 2017 18:21:47 +0200 Subject: ar71xx: add support for TP-Link Archer C25 v1 The TP-Link Archer C25 is a low-cost dual-band router. Specification: - CPU: Atheros QCA9561 775 MHz - RAM: 64 MB - Flash: 8 MB - Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 - NET: 5x 10/100 Mbps Ethernet Some LEDs are controlled by an additional 74HC595 chip. Signed-off-by: Ludwig Thomeczek [minor code style fixes, boards alphabetical order fixes, reworked commit message] Signed-off-by: Piotr Dymacz diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 833522f27b61ac2208c2862bc0f29f34dea5e701..e1efb561b33da4dcfcb82ee953cd888170476dfb 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -53,6 +53,15 @@ ap121f) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; +archer-c25-v1) + ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" + ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" + ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" + ;; arduino-yun) ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 6d8a5c3d0a86a627663dee6e2905e03d5dec99fb..cefb7413eac6ffc50e67f1eaf63def749314428b 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -122,6 +122,7 @@ ar71xx_setup_interfaces() a60|\ alfa-ap96|\ alfa-nx|\ + archer-c25-v1|\ dr344|\ gl-ar150|\ gl-ar300m|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index bc2fc2f774c4f2f0bbfa6e43d9b9a55e9b63153d..38cc5d7853c79f2a7800a387310a95abb3b4de1b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -50,6 +50,7 @@ get_status_led() { ap135-020) status_led="ap135:green:status" ;; + archer-c25-v1|\ mr12|\ mr16|\ nbg6616|\ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b3e23c9a8f8c56870ef36fb55ae52e6b5ea61134..68f90de802ddd18e09a1da39c0d56292eea9489c 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -92,6 +92,7 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; + archer-c25-v1|\ tl-wdr6500-v2) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 170c6f01b4310c4d6c261e9ba97af8786b21c93b..fc7d862c2911e96f76622cbed23e99863814da63 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -463,6 +463,9 @@ ar71xx_board_detect() { *AP90Q) name="ap90q" ;; + *"Archer C25 v1") + name="archer-c25-v1" + ;; *"Archer C5") name="archer-c5" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 21ad2a617db2fe4ff5801aba3a7fae5ba103570a..e65f6e2f7594ba373fbc9a26620859b9005c8532 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -206,6 +206,7 @@ platform_check_image() { ap121f|\ ap132|\ ap90q|\ + archer-c25-v1|\ bullet-m|\ c-55|\ carambola2|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index a8622454b421c1c74a8a71134b53c50399114aa5..e10401d42ae06506f82f2f5538fbc7df79fd4c65 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_AP152=y # CONFIG_ATH79_MACH_AP81 is not set CONFIG_ATH79_MACH_AP90Q=y CONFIG_ATH79_MACH_AP96=y +CONFIG_ATH79_MACH_ARCHER_C25_V1=y CONFIG_ATH79_MACH_ARCHER_C7=y CONFIG_ATH79_MACH_ARDUINO_YUN=y CONFIG_ATH79_MACH_AW_NR580=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 58d7e435362e0bac105e8183206e593329e4ae96..fb2afb965c4641df7cdcaf0920f2d56b3717fa9b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1234,6 +1234,16 @@ config ATH79_MACH_BSB select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_ARCHER_C25_V1 + bool "TP-LINK Archer C25 v1 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_ARCHER_C7 bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 7aee76019552e14ebdbf7bea357859dedb1a5bbb..3365a43ce16fc77b3212b39b92081efe678e8803 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c new file mode 100644 index 0000000000000000000000000000000000000000..a0f001cb49af5aa501c6825c40f3a98ab99503b2 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c @@ -0,0 +1,227 @@ +/* + * TP-Link Archer C25 v1 board support + * + * Copyright (C) 2017 Ludwig Thomeczek + * based on mach-archer-c60/C59-v1.c + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include +#include + +#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */ +#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */ +#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */ +#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */ +#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */ + +#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT +#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27 +#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28 +#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29 +#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30 +#define ARCHER_C25_74HC_GPIO_LED_LAN1 23 +#define ARCHER_C25_74HC_GPIO_LED_LAN2 24 +#define ARCHER_C25_74HC_GPIO_LED_LAN3 25 +#define ARCHER_C25_74HC_GPIO_LED_LAN4 26 + +#define ARCHER_C25_V1_SSR_BIT_0 0 +#define ARCHER_C25_V1_SSR_BIT_1 1 +#define ARCHER_C25_V1_SSR_BIT_2 2 +#define ARCHER_C25_V1_SSR_BIT_3 3 +#define ARCHER_C25_V1_SSR_BIT_4 4 +#define ARCHER_C25_V1_SSR_BIT_5 5 +#define ARCHER_C25_V1_SSR_BIT_6 6 +#define ARCHER_C25_V1_SSR_BIT_7 7 + + +#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20 +#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \ + (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL) + +#define ARCHER_C25_V1_GPIO_BTN_RESET 1 +#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22 + +#define ARCHER_C25_V1_GPIO_LED_POWER 17 +#define ARCHER_C25_V1_GPIO_LED_WPS 2 + +#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000 + +static struct spi_gpio_platform_data archer_c25_v1_spi_data = { + .sck = ARCHER_C25_GPIO_SHIFT_SRCLK, + .miso = SPI_GPIO_NO_MISO, + .mosi = ARCHER_C25_GPIO_SHIFT_SER, + .num_chipselect = 1, +}; + +static u8 archer_c25_v1_ssr_initdata[] __initdata = { + BIT(ARCHER_C25_V1_SSR_BIT_7) | + BIT(ARCHER_C25_V1_SSR_BIT_6) | + BIT(ARCHER_C25_V1_SSR_BIT_5) | + BIT(ARCHER_C25_V1_SSR_BIT_4) | + BIT(ARCHER_C25_V1_SSR_BIT_3) | + BIT(ARCHER_C25_V1_SSR_BIT_2) | + BIT(ARCHER_C25_V1_SSR_BIT_1) +}; + +static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = { + .base = ARCHER_C25_74HC_GPIO_BASE, + .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata), + .init_data = archer_c25_v1_ssr_initdata, +}; + +static struct platform_device archer_c25_v1_spi_device = { + .name = "spi_gpio", + .id = 1, + .dev = { + .platform_data = &archer_c25_v1_spi_data, + }, +}; + +static struct spi_board_info archer_c25_v1_spi_info[] = { + { + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 10000000, + .modalias = "74x164", + .platform_data = &archer_c25_v1_ssr_data, + .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK, + }, +}; + +static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = { + { + .name = "archer-c25-v1:green:power", + .gpio = ARCHER_C25_V1_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:wps", + .gpio = ARCHER_C25_V1_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:wlan2g", + .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:wlan5g", + .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:lan1", + .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:lan2", + .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:lan3", + .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:lan4", + .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "archer-c25-v1:green:wan", + .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "archer-c25-v1:amber:wan", + .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C25_V1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL, + .active_low = 1, + }, +}; + +static void __init archer_c25_v1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008); + u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); + + ath79_register_m25p80(NULL); + + spi_register_board_info(archer_c25_v1_spi_info, + ARRAY_SIZE(archer_c25_v1_spi_info)); + + platform_device_register(&archer_c25_v1_spi_device); + + gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "LED control"); + + gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "LED reset"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio), + archer_c25_v1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(archer_c25_v1_gpio_keys), + archer_c25_v1_gpio_keys); + + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + /* WAN port */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(4); + ath79_register_eth(0); + + /* LAN ports */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_switch_data.phy4_mii_en = 1; + ath79_register_eth(1); + + ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac); + ap91_pci_init(NULL, NULL); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1", + archer_c25_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index a12685cd11a7a6cefe9b69991a5e41db55ccea85..8864e0deda57b926e88dceebd26056a2f8099380 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -40,6 +40,7 @@ enum ath79_mach_type { ATH79_MACH_AP152, /* Atheros AP152 reference board */ ATH79_MACH_AP90Q, /* YunCore AP90Q */ ATH79_MACH_AP96, /* Atheros AP96 */ + ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 9cd6c6372ac8f7e509a0a2422616097c1c19edf6..6933654e575a1ef2c92e4c656696a479cba4c594 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -103,6 +103,22 @@ $(Device/tplink) IMAGE_SIZE := 15872k endef +define Device/archer-c25-v1 + DEVICE_TITLE := TP-LINK Archer C25 v1 + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 + BOARDNAME := ARCHER-C25-V1 + TPLINK_BOARD_NAME := ARCHER-C25-V1 + DEVICE_PROFILE := ARCHERC25V1 + IMAGE_SIZE := 7808k + LOADER_TYPE := elf + KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory + MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware) +endef +TARGET_DEVICES += archer-c25-v1 + define Device/cpe510-520 DEVICE_TITLE := TP-LINK CPE510/520 DEVICE_PACKAGES := rssileds diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index f8d255fd87b8c53511b34b42f4117422218219fe..376835a703f91532300d0dd7c8ef66704acc6e05 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -16,6 +16,7 @@ # CONFIG_ATH79_MACH_AP152 is not set # CONFIG_ATH79_MACH_AP90Q is not set # CONFIG_ATH79_MACH_AP96 is not set +# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_ARDUINO_YUN is not set # CONFIG_ATH79_MACH_AW_NR580 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index c1b5e61c3e9e5f02979584f72621f5e54cde2e36..62be218e33cc6366ea89f363983f36523c419650 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -9,6 +9,7 @@ # CONFIG_ATH79_MACH_AP136 is not set # CONFIG_ATH79_MACH_AP147 is not set # CONFIG_ATH79_MACH_AP96 is not set +# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_AW_NR580 is not set # CONFIG_ATH79_MACH_CAP324 is not set