From: Tim Thorpe Date: Mon, 25 Sep 2017 04:38:49 -0500 Subject: ar71xx: add support for TP-Link TL-WR1043N v5 TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe Signed-off-by: Ludwig Thomeczek diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index e1efb561b33da4dcfcb82ee953cd888170476dfb..e67b5e38561e841b88e486341950c52e1d454322 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -666,14 +666,20 @@ tl-wr1043nd-v2) ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; +tl-wr1043n-v5|\ tl-wr1043nd-v4) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" + + case "$board" in + tl-wr1043nd-v4) + ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ;; + esac ;; tl-wr2543n) ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index cefb7413eac6ffc50e67f1eaf63def749314428b..454abe6a5005621967dd96e0282e7bce2a0b127e 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -243,7 +243,8 @@ ar71xx_setup_interfaces() mynet-n750|\ sr3200|\ wndr3700v4|\ - wndr4300) + wndr4300|\ + tl-wr1043n-v5) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; @@ -487,6 +488,7 @@ ar71xx_setup_macs() lan_mac=$(mtd_get_mac_binary caldata 0) wan_mac=$(mtd_get_mac_binary caldata 6) ;; + tl-wr1043n-v5|\ tl-wr1043nd-v4) lan_mac=$(mtd_get_mac_binary product-info 8) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 38cc5d7853c79f2a7800a387310a95abb3b4de1b..61db387c9ecefd7090c25a5f5d75fdbf65a44d65 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -359,6 +359,7 @@ get_status_led() { tl-wdr3320-v2|\ tl-wdr3500|\ tl-wr1041n-v2|\ + tl-wr1043n-v5|\ tl-wr1043nd|\ tl-wr1043nd-v2|\ tl-wr1043nd-v4|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index fc7d862c2911e96f76622cbed23e99863814da63..8f8158bac8a28db4f4f15ce5c37f48a21084dc03 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -947,6 +947,9 @@ ar71xx_board_detect() { *"TL-WR1043ND v4") name="tl-wr1043nd-v4" ;; + *"TL-WR1043N v5") + name="tl-wr1043n-v5" + ;; *TL-WR2543N*) name="tl-wr2543n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index e65f6e2f7594ba373fbc9a26620859b9005c8532..e748a2559cdb3a0ca6618429b0f613a656e39388 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -261,6 +261,7 @@ platform_check_image() { tew-712br|\ tew-732br|\ tew-823dru|\ + tl-wr1043n-v5|\ unifi-outdoor|\ unifiac-lite|\ unifiac-pro|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index c82fcf09228be7063967f2517e0942651234afb8..57b6d2e541d7ef9dea8570ba8de72164d97b9775 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -181,6 +181,7 @@ CONFIG_ATH79_MACH_TL_WR1041N_V2=y CONFIG_ATH79_MACH_TL_WR1043ND=y CONFIG_ATH79_MACH_TL_WR1043ND_V2=y CONFIG_ATH79_MACH_TL_WR1043ND_V4=y +CONFIG_ATH79_MACH_TL_WR1043N_V5=y CONFIG_ATH79_MACH_TL_WR2543N=y CONFIG_ATH79_MACH_TL_WR703N=y CONFIG_ATH79_MACH_TL_WR720N_V3=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index fb2afb965c4641df7cdcaf0920f2d56b3717fa9b..7ad5419f51ec9909d8b59f33178221a7d81ec184 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1564,6 +1564,15 @@ config ATH79_MACH_TL_WR1041N_V2 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_TL_WR1043N_V5 + bool "TP-LINK TL-WR1043N v5 support" + select SOC_QCA956X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_TL_WR1043ND bool "TP-LINK TL-WR1043ND support" select SOC_AR913X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c index b1539c5d71a61806b88c50f1a78f6a27d98d7a2d..450819a9e6baa997dab2dfba4c5a19261aae9664 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c @@ -5,6 +5,7 @@ * Copyright (C) 2016 Matthias Schiffer * Copyright (C) 2016 Andreas Ziegler * Copyright (C) 2016 Ludwig Thomeczek + * Copyright (C) 2017 Tim Thorpe * * Derived from: mach-dir-869-a1.c * @@ -62,6 +63,8 @@ #define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000 #define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000 +#define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008 + static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = { { .name = "tp-link:green:wps", @@ -188,3 +191,82 @@ static void __init tl_wr1043nd_v4_setup(void) MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4", "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup); + +static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = { + { + .name = "tp-link:green:wps", + .gpio = TL_WR1043_V4_GPIO_LED_WPS, + .active_low = 1, + }, + { + .name = "tp-link:green:system", + .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, + .active_low = 1, + }, + { + .name = "tp-link:green:wlan", + .gpio = TL_WR1043_V4_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "tp-link:green:wan", + .gpio = TL_WR1043_V4_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "tp-link:green:lan1", + .gpio = TL_WR1043_V4_GPIO_LED_LAN1, + .active_low = 1, + }, + { + .name = "tp-link:green:lan2", + .gpio = TL_WR1043_V4_GPIO_LED_LAN2, + .active_low = 1, + }, + { + .name = "tp-link:green:lan3", + .gpio = TL_WR1043_V4_GPIO_LED_LAN3, + .active_low = 1, + }, + { + .name = "tp-link:green:lan4", + .gpio = TL_WR1043_V4_GPIO_LED_LAN4, + .active_low = 1, + }, +}; + +/* The 1043Nv5 is identical to the 1043NDv4, + * only missing the usb and small firmware layout changes */ +static void __init tl_wr1043nv5_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); + u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio), + tl_wr1043n_v5_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), + tl_wr1043nd_v4_gpio_keys); + + platform_device_register(&ath79_mdio0_device); + + mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, + ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); + + ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + /* GMAC0 is connected to an AR8337 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5", + tl_wr1043nv5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 8864e0deda57b926e88dceebd26056a2f8099380..9cb4a7f2e1df641232289721b676a9b0149c76e5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -214,6 +214,7 @@ enum ath79_mach_type { ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ + ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 6933654e575a1ef2c92e4c656696a479cba4c594..5be7cbfbd4ab7d73d679d52d2581459250e04302 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -858,7 +858,22 @@ define Device/tl-wr1043nd-v4 IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade IMAGE/factory.bin := append-rootfs | tplink-safeloader factory endef -TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 + +define Device/tl-wr1043n-v5 + DEVICE_TITLE := TP-LINK TL-WR1043N v5 + BOARDNAME := TL-WR1043N-v5 + SUPPORTED_DEVICES := tl-wr1043n-v5 + DEVICE_PROFILE := TLWR1043 + MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro + IMAGE_SIZE := 15104k + KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \ + append-metadata | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory + TPLINK_BOARD_NAME := TLWR1043NV5 +endef +TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 tl-wr1043n-v5 define Device/tl-wr2543-v1 $(Device/tplink-8mlzma) diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 376835a703f91532300d0dd7c8ef66704acc6e05..f5af38a726f5ce33391223a4dbeb2fc0a8cac613 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -143,6 +143,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y # CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set # CONFIG_ATH79_MACH_TL_WPA8630 is not set # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set +# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set # CONFIG_ATH79_MACH_TL_WR1043ND is not set # CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 62be218e33cc6366ea89f363983f36523c419650..5c18f5d594d625f91ff10e21ddc5af2b3b4d768f 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -52,6 +52,7 @@ # CONFIG_ATH79_MACH_TL_WDR3500 is not set # CONFIG_ATH79_MACH_TL_WDR4300 is not set # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set +# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set # CONFIG_ATH79_MACH_TL_WR1043ND is not set # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set # CONFIG_ATH79_MACH_TL_WR2543N is not set diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 24684268b1a3fe491c4eb876a5ebefc700f2e56e..478d5d8e9b43bbe37694732c138048c8fe8d807c 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -478,6 +478,42 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the TL-WR1043 v5 */ + { + .id = "TLWR1043NV5", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n" + "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + .partitions = { + {"factory-boot", 0x00000, 0x20000}, + {"fs-uboot", 0x20000, 0x20000}, + {"os-image", 0x40000, 0x180000}, + {"file-system", 0x1c0000, 0xd40000}, + {"default-mac", 0xf00000, 0x00200}, + {"pin", 0xf00200, 0x00200}, + {"device-id", 0xf00400, 0x00100}, + {"product-info", 0xf00500, 0x0fb00}, + {"soft-version", 0xf10000, 0x01000}, + {"extra-para", 0xf11000, 0x01000}, + {"support-list", 0xf12000, 0x0a000}, + {"profile", 0xf1c000, 0x04000}, + {"default-config", 0xf20000, 0x10000}, + {"user-config", 0xf30000, 0x40000}, + {"qos-db", 0xf70000, 0x40000}, + {"certificate", 0xfb0000, 0x10000}, + {"partition-table", 0xfc0000, 0x10000}, + {"log", 0xfd0000, 0x20000}, + {"radio", 0xff0000, 0x10000}, + {NULL, 0, 0} + }, + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE450 */ { .id = "RE450", @@ -888,7 +924,9 @@ static void build_image(const char *output, parts[3] = read_file("os-image", kernel_image, false); parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof); - if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) { + /* Some devices need the extra-para partition to accept the firmware */ + if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 || + strcasecmp(info->id, "TLWR1043NV5") == 0) { const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11); }