|
@@ -10,14 +10,14 @@
|
|
hostname_prefix = 'freifunk',
|
|
hostname_prefix = 'freifunk',
|
|
|
|
|
|
-- Name of the community.
|
|
-- Name of the community.
|
|
- site_name = 'Freifunk Lübeck',
|
|
|
|
|
|
+ site_name = 'Freifunk Entenhausen',
|
|
|
|
|
|
-- Shorthand of the community.
|
|
-- Shorthand of the community.
|
|
- site_code = 'ffhl',
|
|
|
|
|
|
+ site_code = 'ffxx',
|
|
|
|
|
|
-- Prefixes used within the mesh. Both are required.
|
|
-- Prefixes used within the mesh. Both are required.
|
|
- prefix4 = '10.130.0.0/20',
|
|
|
|
- prefix6 = 'fdef:ffc0:3dd7::/64',
|
|
|
|
|
|
+ prefix4 = '10.xxx.0.0/20',
|
|
|
|
+ prefix6 = 'fdxx:xxxx:xxxx::/64',
|
|
|
|
|
|
-- Timezone of your community.
|
|
-- Timezone of your community.
|
|
-- See http://wiki.openwrt.org/doc/uci/system#time_zones
|
|
-- See http://wiki.openwrt.org/doc/uci/system#time_zones
|
|
@@ -25,7 +25,7 @@
|
|
|
|
|
|
-- List of NTP servers in your community.
|
|
-- List of NTP servers in your community.
|
|
-- Must be reachable using IPv6!
|
|
-- Must be reachable using IPv6!
|
|
- ntp_servers = {'1.ntp.services.ffhl'},
|
|
|
|
|
|
+ ntp_servers = {'1.ntp.services.ffxx'},
|
|
|
|
|
|
-- Wireless regulatory domain of your community.
|
|
-- Wireless regulatory domain of your community.
|
|
regdom = 'DE',
|
|
regdom = 'DE',
|
|
@@ -36,7 +36,7 @@
|
|
channel = 1,
|
|
channel = 1,
|
|
|
|
|
|
-- ESSID used for client network.
|
|
-- ESSID used for client network.
|
|
- ssid = 'luebeck.freifunk.net',
|
|
|
|
|
|
+ ssid = 'entenhausen.freifunk.net',
|
|
|
|
|
|
-- Specifies the channel width in 802.11n and 802.11ac mode.
|
|
-- Specifies the channel width in 802.11n and 802.11ac mode.
|
|
-- Possible values are:
|
|
-- Possible values are:
|
|
@@ -46,8 +46,8 @@
|
|
htmode = 'HT20',
|
|
htmode = 'HT20',
|
|
|
|
|
|
-- Adjust these values!
|
|
-- Adjust these values!
|
|
- mesh_ssid = 'XX:XX:XX:XX:XX:XX', -- ESSID used for mesh
|
|
|
|
- mesh_bssid = 'XX:XX:XX:XX:XX:XX', -- BSSID used for mesh
|
|
|
|
|
|
+ mesh_ssid = 'xe:xx:xx:xx:xx:xx', -- ESSID used for mesh
|
|
|
|
+ mesh_bssid = 'xe:xx:xx:xx:xx:xx', -- BSSID used for mesh
|
|
|
|
|
|
-- Bitrate used for multicast/broadcast packets.
|
|
-- Bitrate used for multicast/broadcast packets.
|
|
mesh_mcast_rate = 12000,
|
|
mesh_mcast_rate = 12000,
|
|
@@ -57,11 +57,11 @@
|
|
-- This should be equal to the 2.4 GHz variant, except
|
|
-- This should be equal to the 2.4 GHz variant, except
|
|
-- for channel and htmode.
|
|
-- for channel and htmode.
|
|
wifi5 = {
|
|
wifi5 = {
|
|
- ssid = 'luebeck.freifunk.net',
|
|
|
|
|
|
+ ssid = 'entenhausen.freifunk.net',
|
|
channel = 44,
|
|
channel = 44,
|
|
htmode = 'HT20',
|
|
htmode = 'HT20',
|
|
- mesh_ssid = 'XX:XX:XX:XX:XX:XX',
|
|
|
|
- mesh_bssid = 'XX:XX:XX:XX:XX:XX',
|
|
|
|
|
|
+ mesh_ssid = 'xx:xx:xx:xx:xx:xx',
|
|
|
|
+ mesh_bssid = 'xx:xx:xx:xx:xx:xx',
|
|
mesh_mcast_rate = 12000,
|
|
mesh_mcast_rate = 12000,
|
|
},
|
|
},
|
|
|
|
|
|
@@ -69,18 +69,18 @@
|
|
-- connected to using a known IP address.
|
|
-- connected to using a known IP address.
|
|
next_node = {
|
|
next_node = {
|
|
-- anycast IPs of all nodes
|
|
-- anycast IPs of all nodes
|
|
- ip4 = '10.130.0.1',
|
|
|
|
- ip6 = 'fdef:ffc0:3dd7::1',
|
|
|
|
|
|
+ ip4 = '10.xxx.0.xxx',
|
|
|
|
+ ip6 = 'fdxx:xxxx:xxxx::xxxx',
|
|
|
|
|
|
-- anycast MAC of all nodes
|
|
-- anycast MAC of all nodes
|
|
- mac = '16:41:95:40:f7:dc',
|
|
|
|
|
|
+ mac = 'xe:xx:xx:xx:xx:xx',
|
|
},
|
|
},
|
|
|
|
|
|
-- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
|
|
-- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
|
|
-- what these options do.
|
|
-- what these options do.
|
|
fastd_mesh_vpn = {
|
|
fastd_mesh_vpn = {
|
|
-- List of crypto-methods to use.
|
|
-- List of crypto-methods to use.
|
|
- methods = {'salsa2012+gmac'},
|
|
|
|
|
|
+ methods = {'salsa2012+umac'},
|
|
mtu = 1426,
|
|
mtu = 1426,
|
|
backbone = {
|
|
backbone = {
|
|
-- Limit number of connected peers to reduce bandwidth.
|
|
-- Limit number of connected peers to reduce bandwidth.
|
|
@@ -88,15 +88,16 @@
|
|
|
|
|
|
-- List of peers.
|
|
-- List of peers.
|
|
peers = {
|
|
peers = {
|
|
- burgtor = {
|
|
|
|
- key = '657af03e36ff1b8bbe5a5134982a4f110c8523a9a63293870caf548916a95a03',
|
|
|
|
|
|
+ peer1 = {
|
|
|
|
+ key = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx',
|
|
|
|
|
|
-- This is a list, so you might add multiple entries.
|
|
-- This is a list, so you might add multiple entries.
|
|
- remotes = {'ipv4 "burgtor.mesh.ffhl.chaotikum.org" port 10000'},
|
|
|
|
|
|
+ remotes = {'ipv4 "xxx.somehost.invalid" port xxxxxx'},
|
|
},
|
|
},
|
|
- holstentor = {
|
|
|
|
- key = '8c660f7511bf101ea1b599fe53af20e1146cd923c9e9d2a3a0d534ee75af9067',
|
|
|
|
- remotes = {'ipv4 "holstentor.mesh.ffhl.chaotikum.org" port 10000'},
|
|
|
|
|
|
+ peer2 = {
|
|
|
|
+ key = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx',
|
|
|
|
+ -- You can also omit the ipv4 to allow both connection via ipv4 and ipv6
|
|
|
|
+ remotes = {'"xxx.somehost2.invalid" port xxxxx'},
|
|
},
|
|
},
|
|
},
|
|
},
|
|
},
|
|
},
|
|
@@ -122,9 +123,9 @@
|
|
|
|
|
|
-- List of public keys of maintainers.
|
|
-- List of public keys of maintainers.
|
|
pubkeys = {
|
|
pubkeys = {
|
|
- 'daa19b44bbd7033965e02088127bad9516ba0fea8f34267a777144a23ec8900c', -- Linus
|
|
|
|
- 'a8dd60765b07330a4bbfdf8406102befca132881a4b65f3efda32cf2d5b362d9', -- Nils
|
|
|
|
- '323bd3285c4e5547a89cd6da1f2aef67f1654b0928bbd5b104efc9dab2156d0b', -- NeoRaider
|
|
|
|
|
|
+ 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Alice
|
|
|
|
+ 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Bob
|
|
|
|
+ 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Mary
|
|
},
|
|
},
|
|
},
|
|
},
|
|
},
|
|
},
|
|
@@ -159,25 +160,24 @@
|
|
-- <%=sysconfig.primary_mac%> - the node's primary MAC
|
|
-- <%=sysconfig.primary_mac%> - the node's primary MAC
|
|
config_mode = {
|
|
config_mode = {
|
|
msg_welcome = [[
|
|
msg_welcome = [[
|
|
-Willkommen zum Einrichtungsassistenten für deinen neuen Lübecker
|
|
|
|
|
|
+Willkommen zum Einrichtungsassistenten für deinen neuen Entenhausener
|
|
Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
|
|
Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
|
|
entsprechend aus und sende es ab.
|
|
entsprechend aus und sende es ab.
|
|
]],
|
|
]],
|
|
msg_pubkey = [[
|
|
msg_pubkey = [[
|
|
Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem
|
|
Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem
|
|
-er auf den Servern des Lübecker Freifunk-Projektes eingetragen wurde,
|
|
|
|
-kann sich dein Knoten mit dem Lübecker Mesh-VPN zu verbinden. Bitte
|
|
|
|
|
|
+er auf den Servern des Entenhausener Freifunk-Projektes eingetragen wurde,
|
|
|
|
+kann sich dein Knoten mit dem Entenhausener Mesh-VPN verbinden. Bitte
|
|
schicke dazu diesen Schlüssel und den Namen deines Knotens
|
|
schicke dazu diesen Schlüssel und den Namen deines Knotens
|
|
(<em><%=hostname%></em>) an
|
|
(<em><%=hostname%></em>) an
|
|
-<a href="mailto:keys@luebeck.freifunk.net">keys@luebeck.freifunk.net</a>.
|
|
|
|
|
|
+<a href="mailto:keys@entenhausen.freifunk.net">keys@entenhausen.freifunk.net</a>.
|
|
]],
|
|
]],
|
|
msg_reboot = [[
|
|
msg_reboot = [[
|
|
<p>
|
|
<p>
|
|
Dein Knoten startet gerade neu und wird anschließend versuchen,
|
|
Dein Knoten startet gerade neu und wird anschließend versuchen,
|
|
-sich anschließend mit anderen Freifunk-Knoten in seiner Nähe zu
|
|
|
|
-verbinden. Weitere Informationen zur
|
|
|
|
-Lübecker Freifunk-Community findest du auf
|
|
|
|
-<a href="https://luebeck.freifunk.net/">unserer Webseite</a>.
|
|
|
|
|
|
+sich mit anderen Freifunk-Knoten in seiner Nähe zu verbinden.
|
|
|
|
+Weitere Informationen zur Entenhausener Freifunk-Community
|
|
|
|
+findest du auf <a href="https://entenhausen.freifunk.net/">unserer Webseite</a>.
|
|
</p>
|
|
</p>
|
|
<p>
|
|
<p>
|
|
Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
|
|
Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
|