|
@@ -1,232 +0,0 @@
|
|
|
-{
|
|
|
- -- A new node's name will be autogenerated from
|
|
|
- -- it's primary MAC address and this prefix.
|
|
|
- -- e.g. freifunk-0123456789ab
|
|
|
- hostname_prefix = 'freifunk',
|
|
|
-
|
|
|
- -- name of this community
|
|
|
- site_name = 'Freifunk Paderborn',
|
|
|
- -- short name of this community
|
|
|
- site_code = 'ffpb',
|
|
|
-
|
|
|
- -- v4 and v6 prefixes in which nodes+clients might get an IP
|
|
|
- prefix4 = '10.132.0.0/18',
|
|
|
- prefix6 = 'fdca:ffee:ff12:132::/64',
|
|
|
-
|
|
|
- -- extra ipv6 prefixes used in this mesh area
|
|
|
- additional_prefix6 = { '2001:470:6d:860::/64', },
|
|
|
-
|
|
|
- -- timezone
|
|
|
- timezone = 'CET-1CEST,M3.5.0,M10.5.0/3', -- Europe/Berlin
|
|
|
-
|
|
|
- -- network-internal ntp service
|
|
|
- ntp_servers = {'ntp.services.ffpb'},
|
|
|
-
|
|
|
- -- OpenWRT Package Repository (IPv6 capable)
|
|
|
- opkg_repo = 'http://bo.mirror.garr.it/pub/1/openwrt/barrier_breaker/14.07/%S/packages/',
|
|
|
-
|
|
|
- -- regulatory domain of your wifi
|
|
|
- regdom = 'DE',
|
|
|
-
|
|
|
- -- wifi settings (2.4 GHz and 5 GHz)
|
|
|
- -- the most important thing to change is the SSID
|
|
|
- -- of the client network (yourcity.freifunk.net) and
|
|
|
- -- both(!) mesh_?ssid ad-hoc mesh network ids.
|
|
|
- wifi24 = {
|
|
|
- ssid = 'paderborn.freifunk.net',
|
|
|
- channel = 1,
|
|
|
- htmode = 'HT20',
|
|
|
- mesh_ssid = '02:d1:11:13:87:ad',
|
|
|
- mesh_bssid = '02:d1:11:13:87:ad',
|
|
|
- mesh_mcast_rate = 12000,
|
|
|
- },
|
|
|
- wifi5 = {
|
|
|
- ssid = 'paderborn.freifunk.net',
|
|
|
- channel = 44,
|
|
|
- htmode = 'HT40+',
|
|
|
- mesh_ssid = '02:d1:11:13:87:ad',
|
|
|
- mesh_bssid = '02:d1:11:13:87:ad',
|
|
|
- mesh_mcast_rate = 12000,
|
|
|
- },
|
|
|
-
|
|
|
- -- IP address of each router
|
|
|
- -- At this IP a client can always connect to its
|
|
|
- -- currently connected node. Both v4 and v6 addr.
|
|
|
- -- must lie in the above prefix4 and prefix6.
|
|
|
- next_node = {
|
|
|
- ip4 = '10.132.0.1',
|
|
|
- ip6 = 'fdca:ffee:ff12:132::1',
|
|
|
-
|
|
|
- -- mac address, must be unique in the client network
|
|
|
- -- (usually, you don't need to change this)
|
|
|
- mac = '16:41:95:40:f7:dc',
|
|
|
- },
|
|
|
-
|
|
|
- -- fastd (vpn) settings
|
|
|
- fastd_mesh_vpn = {
|
|
|
- -- cipher(s) to use
|
|
|
- methods = {'salsa2012+gmac'},
|
|
|
-
|
|
|
- -- the maximum transfer unit
|
|
|
- -- use 1426 for IPv4 gateways
|
|
|
- mtu = 1406,
|
|
|
-
|
|
|
- groups = {
|
|
|
- backbone = {
|
|
|
- -- specifies how many servers are contacted
|
|
|
- -- by a client simultanously
|
|
|
- limit = 1,
|
|
|
-
|
|
|
- -- list all available vpn servers
|
|
|
- peers = {
|
|
|
- gw01 = {
|
|
|
- -- public fastd key of the vpn server
|
|
|
- key = '97bc56ae561f67cfe15364134868c3553b5f1eab06f7bd9c5b93fbf280a52b51',
|
|
|
- -- remotes is an array of ways on how to reach the VPN server
|
|
|
- -- Use public addresses here, these addresses are used when the mesh might not be connected yet.
|
|
|
- -- format: '[|ipv4|ipv6] "hostname-or-ip-address" port 10000'
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw01.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw01.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a01:4f8:190:2105::ff12" port 10000',
|
|
|
- 'ipv4 "85.10.248.243" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw02 = {
|
|
|
- key = 'e8fa9bf402fd33dd1ba804a97f2e46c704423ff49e9c55312845a7bfb93121ad',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw02.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw02.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a01:4f8:190:6500::18:1" port 10000',
|
|
|
- 'ipv4 "78.46.242.24" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw03 = {
|
|
|
- key = 'cf7b54f7221a26251a5970e1d404f864ff4bfed3254bd741cf754445e040b9d0',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw03.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw03.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a01:a700:4621:d100::10" port 10000',
|
|
|
- 'ipv4 "31.172.8.123" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw04 = {
|
|
|
- key = 'cf3855e5fa04e4c04a294cb6e8902f91c7ff7ef82bf031cc842a2b79b936677c',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw04.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw04.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a02:450:1:4::10" port 10000',
|
|
|
- 'ipv4 "80.70.181.57" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw05 = {
|
|
|
- key = 'd0d32a2f536a0fc1f0c848e6da15bd96851d5ff4fdf9239c830bab033ddcec1a',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw05.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw05.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2001:638:502:1884::ff05" port 10000',
|
|
|
- 'ipv4 "192.26.175.182" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw06 = {
|
|
|
- key = 'b912bcf1c1335390364b8030448e53d8869b650f32923e59bf01d763d3028840',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw06.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw06.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a03:4000:6:20f0::ff12" port 10000',
|
|
|
- 'ipv4 "5.45.111.222" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- gw08 = {
|
|
|
- key = '3da050bbf1c3e95af286af65553f546fd563d9cb5d4b3b3444069bef281de621',
|
|
|
- remotes = {
|
|
|
- 'ipv6 "v6.gw08.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv4 "v4.gw08.paderborn.freifunk.net" port 10000',
|
|
|
- 'ipv6 "2a03:4000:6:1151::ff12" port 10000',
|
|
|
- 'ipv4 "5.45.107.59" port 10000',
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
-
|
|
|
- -- configure the autoupdater
|
|
|
- autoupdater = {
|
|
|
- enabled = 1,
|
|
|
-
|
|
|
- -- default branch for a firmware
|
|
|
- -- In config-mode, the user can select a different branch from below
|
|
|
- branch = 'stable',
|
|
|
-
|
|
|
- -- available branches for the autoupdater
|
|
|
- branches = {
|
|
|
- stable = {
|
|
|
- -- visible name of this branch (why not use the internal identifier here, too)
|
|
|
- name = 'stable',
|
|
|
-
|
|
|
- -- where to get the manifest file (without the trailing /manifest)
|
|
|
- -- It's wise to use an internal address here,
|
|
|
- -- but specifying a publicly available update site does not hurt.
|
|
|
- mirrors = {'http://[fdca:ffee:ff12:a254::80]/stable', 'http://firmware.paderborn.freifunk.net/stable'},
|
|
|
-
|
|
|
- -- Number of valid manifest signatures necessary to accept the manifest as "good".
|
|
|
- good_signatures = 3,
|
|
|
-
|
|
|
- -- list of public keys which are considered "good" for manifest signatures
|
|
|
- pubkeys = {
|
|
|
- '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
|
|
|
- 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
|
|
|
- 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
|
|
|
- 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
|
|
|
- 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
|
|
|
- },
|
|
|
- },
|
|
|
- testing = {
|
|
|
- name = 'testing',
|
|
|
- mirrors = {'http://[fdca:ffee:ff12:a254::80]/testing','http://firmware.paderborn.freifunk.net/testing'},
|
|
|
- good_signatures = 2,
|
|
|
- pubkeys = {
|
|
|
- '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
|
|
|
- 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
|
|
|
- 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
|
|
|
- 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
|
|
|
- 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
|
|
|
- },
|
|
|
- },
|
|
|
- experimental = {
|
|
|
- name = 'experimental',
|
|
|
- mirrors = {'http://[fdca:ffee:ff12:a254::80]/experimental','http://firmware.paderborn.freifunk.net/experimental'},
|
|
|
- good_signatures = 1,
|
|
|
- pubkeys = {
|
|
|
- '16b0e942929d6592d4a01b66b334427ba4db03b388a876432958d9010bd8d8b5', -- HeJ
|
|
|
- 'b0197042824a752c2dba717a4b2ded88852111bbe12e6b5f57fdfa3abb9312c0', -- thardes2
|
|
|
- 'ba2e6ff4de41ade9959702195d4c26c764e7aab85c627363681c29dbc4a8a2c5', -- oscar-
|
|
|
- 'fb9d6beba63dcb6175d0248c1e743b5fe4359474eb264d27f389d7a962e24477', -- northalpha
|
|
|
- 'f70f9ddeb307fff8fca31a76f4fbd0ac676dab8ad143625f0a4160d434d72876', -- Barbarossa
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
- },
|
|
|
-
|
|
|
- -- default traffic shaping (bandwidth limit) settings
|
|
|
- simple_tc = {
|
|
|
- mesh_vpn = {
|
|
|
- ifname = 'mesh-vpn',
|
|
|
- enabled = false,
|
|
|
- limit_egress = 200,
|
|
|
- limit_ingress = 3000,
|
|
|
- },
|
|
|
- },
|
|
|
-
|
|
|
- -- configure ffpb-debug
|
|
|
- debugserver = {
|
|
|
- host = { 'debugreport.paderborn.freifunk.net', 'fdca:ffee:ff12:a254::deb9' },
|
|
|
- port = 1337,
|
|
|
- liveport = 1338,
|
|
|
- },
|
|
|
-
|
|
|
- -- enable BATMAN on WAN interface by default (requires gluon-batman-on-wan package)
|
|
|
- batman_on_wan = 0,
|
|
|
-
|
|
|
-}
|