ffho-salt-public/yanic/yanic.conf.tmpl

# This is the config file for Yanic written in "Tom's Obvious, Minimal Language."
# syntax: https://github.com/toml-lang/toml
# (if you need somethink multiple times, checkout out the [[table]] section)

# Send respondd request to update information
[respondd]
enable           = true
# Delay startup until a multiple of the period since zero time
synchronize      = "1m"
# how often request per multicast
collect_interval = "1m"
# define a port to listen
# if not set or set to 0 the kernel will use a random free port at its own
#port = 10001

[[respondd.interfaces]]
ifname = "{{iface}}"

# A little build-in webserver, which statically serves a directory.
# This is useful for testing purposes or for a little standalone installation.
[webserver]
enable  = {{webserver}}
bind    = "[{{bind_ip}}]:8080"
webroot = "/srv/yanic/data"


[nodes]
# Cache file
# a json file to cache all data collected directly from respondd
state_path    = "/srv/yanic/{{site}}.state"
# prune data in RAM, cache-file and output json files (i.e. nodes.json)
# that were inactive for longer than
prune_after   = "30d"
# Export nodes and graph periodically
save_interval = "1m"
# Set node to offline if not seen within this period
offline_after = "10m"


## [[nodes.output.example]]
# Each output format has its own config block and needs to be enabled by adding:
#enable = true
#
# For each output format there can be set different filters
#[nodes.output.example.filter]
#
# Set to false, if you want the json files to contain the owner information
#no_owner = true
#
# List of nodeids of nodes that should be filtered out, so they won't appear in output
#blacklist = ["00112233445566", "1337f0badead"]
#
# set has_location to true if you want to include only nodes that have geo-coordinates set
# (setting this to false has no sensible effect, unless you'd want to hide nodes that have coordinates)
#has_location = true

#[nodes.output.example.filter.in_area]
# nodes outside this area are not shown on the map but are still listed as a node without coordinates
#latitude_min = 34.30
#latitude_max = 71.85
#longitude_min = -24.96
#longitude_max = 39.72


# definition for the new more compressed meshviewer.json
[[nodes.output.meshviewer-ffrgb]]
enable   = true
path = "/srv/yanic/data/{{site}}/meshviewer.json"

[nodes.output.meshviewer-ffrgb.filter]
no_owner = true
#blacklist = ["00112233445566", "1337f0badead"]
#has_location = true

#[nodes.output.meshviewer-ffrgb.filter.in_area]
#latitude_min = 34.30
#latitude_max = 71.85
#longitude_min = -24.96
#longitude_max = 39.72


# definition for nodes.json
[[nodes.output.meshviewer]]
enable = true
# The structure version of the output which should be generated (i.e. nodes.json)
# version 1 is accepted by the legacy meshviewer (which is the master branch)
#   i.e. https://github.com/ffnord/meshviewer/tree/master
# version 2 is accepted by the new versions of meshviewer (which are in the legacy develop branch or newer)
#   i.e. https://github.com/ffnord/meshviewer/tree/dev
#        https://github.com/ffrgb/meshviewer/tree/develop
version    = 2
# path where to store nodes.json
nodes_path = "/srv/yanic/data/{{site}}/nodes.json"
# path where to store graph.json
graph_path = "/srv/yanic/data/{{site}}/graph.json"

[nodes.output.meshviewer.filter]
no_owner = true


# definition for nodelist.json
[[nodes.output.nodelist]]
enable   = true
path = "/srv/yanic/data/{{site}}/nodelist.json"

[nodes.output.nodelist.filter]
no_owner = true



[database]
# this will send delete commands to the database to prune data
# which is older than:
delete_after    = "30d"
# how often run the cleaning
delete_interval = "1d"

## [[database.connection.example]]
# Each database-connection has its own config block and needs to be enabled by adding:
#enable = true

# Save collected data to InfluxDB.
# There are the following measurments:
#   node: store node specific data i.e. clients memory, airtime
#   global: store global data, i.e. count of clients and nodes
#   firmware: store the count of nodes tagged with firmware
#   model: store the count of nodes tagged with hardware model
[[database.connection.influxdb]]
enable   = true
address  = "{{influxdb.address}}"
database = "{{influxdb.database}}"
username = "{{influxdb.username}}"
password = "{{influxdb.password}}"

# Tagging of the data (optional)
[database.connection.influxdb.tags]
# Tags used by Yanic would override the tags from this config
# nodeid, hostname, owner, model and firmware are tags which are already used
#tagname1 = "tagvalue 1"
# some usefull e.g.:
#system   = "productive"
#site     = "ffhb"
job      = "{{site}}"

# Logging
[[database.connection.logging]]
enable   = false
path     = "/var/log/yanic.log"

# Graphite settings
[[database.connection.graphite]]
enable   = false
address  = "localhost:2003"
# Graphite is replacing every "." in the metric name with a slash "/" and uses
# that for the file system hierarchy it generates. it is recommended to at least
# move the metrics out of the root namespace (that would be the empty prefix).
# If you only intend to run one community and only freifunk on your graphite node
# then the prefix can be set to anything (including the empty string) since you
# probably wont care much about "polluting" the namespace.
prefix   = "freifunk"