ffho-salt-public/snmpd/snmpd.conf

{%- set node_config = salt['pillar.get'] ('nodes:' ~ grains['id']) %}
{%- set ro_community = salt['pillar.get'] ('globals:snmp:ro_community', "Configure globals:snmp:ro_community in pillar...") %}
{%- set sys_contact = salt['pillar.get'] ('globals:ops_mail', "Configure globals:ops_mail in pillar...") %}
{%- set sys_location = node_config.get ('sysLocation', "Please fix sysLocation...") %}
{%- set nms_list = salt['pillar.get'] ('globals:snmp:nms_list', []) %}

{%- set sites_config = salt['pillar.get'] ('sites', {}) %}
{%- set ifaces = salt['ffho_net.get_interface_config'] (node_config, sites_config) %}


#
# /etc/snmp/snmpd.conf (Salt managed)
#

sysLocation	{{ sys_location }}
sysContact	{{ sys_contact }}
sysServices	72

# Listen for connections from the local system
agentAddress  udp:127.0.0.1:161
agentAddress  udp6:[::1]:161

# Listen for connections on Loopback-IPs
agentAddress  udp:{{ salt['ffho_net.get_loopback_ip'] (node_config, grains['id'], 'v4') }}:161
agentAddress  udp6:[{{ salt['ffho_net.get_loopback_ip'] (node_config, grains['id'], 'v6') }}]:161

# We accept requests from those fine boxes
rocommunity	{{ ro_community }}	127.0.0.1
rocommunity6	{{ ro_community }}	::1
{%- for entry in nms_list %}
  {%- if ':' in entry %}
rocommunity6	{{ ro_community }}	{{ entry }}
  {%- else %}
rocommunity	{{ ro_community }}	{{ entry }}
  {%- endif %}
{%- endfor %}

#
# Network interfaces
#
# Set bandwidth of VLAN, B.A.T.M.A.N., bridge and vEth interface to 100Mb/s
# The default is 10Mb/s which makes LibreNMS whine quite a lot if there is
# a little traffic. 100Mb/s currently seems a decent idea for us but is not
# an ideal value for everyone.
{%- for iface in ifaces|sort %}
 {%- set config = ifaces.get (iface) %}
 {%- if 'vlan-raw-device' in config or "batman" in config or "bridge" in config or config.get ('link-type', '') == 'veth' %}
interface	{{ iface }}	6	100000000
 {%- endif %}
{%- endfor %}

{%- if "fastd" in node_config.get ('roles') %}
  {%- for site in node_config.get ('sites') %}
interface	{{ site }}_intergw	6	100000000
  {%- endfor %}
{%- endif %}

{%- set ovpn_networks = [] %}
{%- for netname, network in salt['pillar.get']('ovpn', {}).items () if grains['id'] in network %}
  {%- do ovpn_networks.append (netname) %}
{%- endfor %}
{%- for netname in ovpn_networks|sort %}
  {%- set network = salt['pillar.get']('ovpn:' ~ netname) %}
  {%- set network_config = network.get ('config') %}
  {%- set host_stanza = network.get (grains['id']) %}
  {%- set host_config = host_stanza.get ('config', {}) %}
  {%- set interface = host_config.get ('interface', network_config.get ('interface')) %}
  {%- if loop.first %}
# OpenVPN interfaces
  {%- endif %}
interface	{{ interface }}	6	100000000
{%- endfor %}


#
#  Disk Monitoring
#
                               # 10MBs required on root disk, 5% free on /var, 10% free on all other disks
disk       /     10000
disk       /var  5%
includeAllDisks  10%

#  Walk the UCD-SNMP-MIB::dskTable to see the resulting output
#  Note that this table will be empty if there are no "disk" entries in the snmpd.conf file


#
#  System Load
#
                               # Unacceptable 1-, 5-, and 15-minute load averages
load   12 10 5

#  Walk the UCD-SNMP-MIB::laTable to see the resulting output
#  Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file


#
#  Event MIB - automatically generate alerts
#
                                   # Remember to activate the 'createUser' lines above
iquerySecName   internalUser
rouser          internalUser
                                   # generate traps on UCD error conditions
defaultMonitors          no
                                   # generate traps on linkUp/Down
linkUpDownNotifications  no


master          agentx