Browse Source

lvm: New config version for Debian buster.

Signed-off-by: Maximilian Wilhelm <max@sdn.clinic>
Maximilian Wilhelm 4 years ago
parent
commit
979e8bd484
2 changed files with 2193 additions and 1 deletions
  1. 3 1
      hardware/init.sls
  2. 2190 0
      hardware/lvm.conf.Debian.buster

+ 3 - 1
hardware/init.sls

@@ -5,4 +5,6 @@
 # Only read PVs from sw/hw RAID and physical disks. Ignore anything else (like PVs within VM LVs).
 /etc/lvm/lvm.conf:
   file.managed:
-    - source: salt://hardware/lvm.conf
+    - source:
+      - salt://hardware/lvm.conf.{{ grains.os }}.{{ grains.oscodename }}
+      - salt://hardware/lvm.conf

+ 2190 - 0
hardware/lvm.conf.Debian.buster

@@ -0,0 +1,2190 @@
+# This is an example configuration file for the LVM2 system.
+# It contains the default settings that would be used if there was no
+# /etc/lvm/lvm.conf file.
+#
+# Refer to 'man lvm.conf' for further information including the file layout.
+#
+# Refer to 'man lvm.conf' for information about how settings configured in
+# this file are combined with built-in values and command line options to
+# arrive at the final values used by LVM.
+#
+# Refer to 'man lvmconfig' for information about displaying the built-in
+# and configured values used by LVM.
+#
+# If a default value is set in this file (not commented out), then a
+# new version of LVM using this file will continue using that value,
+# even if the new version of LVM changes the built-in default value.
+#
+# To put this file in a different directory and override /etc/lvm set
+# the environment variable LVM_SYSTEM_DIR before running the tools.
+#
+# N.B. Take care that each setting only appears once if uncommenting
+# example settings in this file.
+
+
+# Configuration section config.
+# How LVM configuration settings are handled.
+config {
+
+	# Configuration option config/checks.
+	# If enabled, any LVM configuration mismatch is reported.
+	# This implies checking that the configuration key is understood by
+	# LVM and that the value of the key is the proper type. If disabled,
+	# any configuration mismatch is ignored and the default value is used
+	# without any warning (a message about the configuration key not being
+	# found is issued in verbose mode only).
+	checks = 1
+
+	# Configuration option config/abort_on_errors.
+	# Abort the LVM process if a configuration mismatch is found.
+	abort_on_errors = 0
+
+	# Configuration option config/profile_dir.
+	# Directory where LVM looks for configuration profiles.
+	profile_dir = "/etc/lvm/profile"
+}
+
+# Configuration section devices.
+# How LVM uses block devices.
+devices {
+
+	# Configuration option devices/dir.
+	# Directory in which to create volume group device nodes.
+	# Commands also accept this as a prefix on volume group names.
+	# This configuration option is advanced.
+	dir = "/dev"
+
+	# Configuration option devices/scan.
+	# Directories containing device nodes to use with LVM.
+	# This configuration option is advanced.
+	scan = [ "/dev" ]
+
+	# Configuration option devices/obtain_device_list_from_udev.
+	# Obtain the list of available devices from udev.
+	# This avoids opening or using any inapplicable non-block devices or
+	# subdirectories found in the udev directory. Any device node or
+	# symlink not managed by udev in the udev directory is ignored. This
+	# setting applies only to the udev-managed device directory; other
+	# directories will be scanned fully. LVM needs to be compiled with
+	# udev support for this setting to apply.
+	obtain_device_list_from_udev = 1
+
+	# Configuration option devices/external_device_info_source.
+	# Select an external device information source.
+	# Some information may already be available in the system and LVM can
+	# use this information to determine the exact type or use of devices it
+	# processes. Using an existing external device information source can
+	# speed up device processing as LVM does not need to run its own native
+	# routines to acquire this information. For example, this information
+	# is used to drive LVM filtering like MD component detection, multipath
+	# component detection, partition detection and others.
+	# 
+	# Accepted values:
+	#   none
+	#     No external device information source is used.
+	#   udev
+	#     Reuse existing udev database records. Applicable only if LVM is
+	#     compiled with udev support.
+	# 
+	external_device_info_source = "none"
+
+	# Configuration option devices/preferred_names.
+	# Select which path name to display for a block device.
+	# If multiple path names exist for a block device, and LVM needs to
+	# display a name for the device, the path names are matched against
+	# each item in this list of regular expressions. The first match is
+	# used. Try to avoid using undescriptive /dev/dm-N names, if present.
+	# If no preferred name matches, or if preferred_names are not defined,
+	# the following built-in preferences are applied in order until one
+	# produces a preferred name:
+	# Prefer names with path prefixes in the order of:
+	# /dev/mapper, /dev/disk, /dev/dm-*, /dev/block.
+	# Prefer the name with the least number of slashes.
+	# Prefer a name that is a symlink.
+	# Prefer the path with least value in lexicographical order.
+	# 
+	# Example
+	# preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option devices/filter.
+	# Limit the block devices that are used by LVM commands.
+	# This is a list of regular expressions used to accept or reject block
+	# device path names. Each regex is delimited by a vertical bar '|'
+	# (or any character) and is preceded by 'a' to accept the path, or
+	# by 'r' to reject the path. The first regex in the list to match the
+	# path is used, producing the 'a' or 'r' result for the device.
+	# When multiple path names exist for a block device, if any path name
+	# matches an 'a' pattern before an 'r' pattern, then the device is
+	# accepted. If all the path names match an 'r' pattern first, then the
+	# device is rejected. Unmatching path names do not affect the accept
+	# or reject decision. If no path names for a device match a pattern,
+	# then the device is accepted. Be careful mixing 'a' and 'r' patterns,
+	# as the combination might produce unexpected results (test changes.)
+	# Run vgscan after changing the filter to regenerate the cache.
+	# 
+	# Example
+	# Accept every block device:
+	# filter = [ "a|.*/|" ]
+	# Reject the cdrom drive:
+	# filter = [ "r|/dev/cdrom|" ]
+	# Work with just loopback devices, e.g. for testing:
+	# filter = [ "a|loop|", "r|.*|" ]
+	# Accept all loop devices and ide drives except hdc:
+	# filter = [ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
+	# Use anchors to be very specific:
+	# filter = [ "a|^/dev/hda8$|", "r|.*/|" ]
+	# 
+	# This configuration option has an automatic default value.
+	# filter = [ "a|.*/|" ]
+	filter = [ "a|/dev/md[0-9]+|/dev/cciss/c0d.*|/dev/sd[a-z]+|", "r/.*/" ]
+
+	# Configuration option devices/global_filter.
+	# Limit the block devices that are used by LVM system components.
+	# Because devices/filter may be overridden from the command line, it is
+	# not suitable for system-wide device filtering, e.g. udev.
+	# Use global_filter to hide devices from these LVM system components.
+	# The syntax is the same as devices/filter. Devices rejected by
+	# global_filter are not opened by LVM.
+	# This configuration option has an automatic default value.
+	# global_filter = [ "a|.*/|" ]
+
+	# Configuration option devices/types.
+	# List of additional acceptable block device types.
+	# These are of device type names from /proc/devices, followed by the
+	# maximum number of partitions.
+	# 
+	# Example
+	# types = [ "fd", 16 ]
+	# 
+	# This configuration option is advanced.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option devices/sysfs_scan.
+	# Restrict device scanning to block devices appearing in sysfs.
+	# This is a quick way of filtering out block devices that are not
+	# present on the system. sysfs must be part of the kernel and mounted.)
+	sysfs_scan = 1
+
+	# Configuration option devices/scan_lvs.
+	# Scan LVM LVs for layered PVs.
+	scan_lvs = 1
+
+	# Configuration option devices/multipath_component_detection.
+	# Ignore devices that are components of DM multipath devices.
+	multipath_component_detection = 1
+
+	# Configuration option devices/md_component_detection.
+	# Ignore devices that are components of software RAID (md) devices.
+	md_component_detection = 1
+
+	# Configuration option devices/fw_raid_component_detection.
+	# Ignore devices that are components of firmware RAID devices.
+	# LVM must use an external_device_info_source other than none for this
+	# detection to execute.
+	fw_raid_component_detection = 0
+
+	# Configuration option devices/md_chunk_alignment.
+	# Align the start of a PV data area with md device's stripe-width.
+	# This applies if a PV is placed directly on an md device.
+	# default_data_alignment will be overriden if it is not aligned
+	# with the value detected for this setting.
+	# This setting is overriden by data_alignment_detection,
+	# data_alignment, and the --dataalignment option.
+	md_chunk_alignment = 1
+
+	# Configuration option devices/default_data_alignment.
+	# Align the start of a PV data area with this number of MiB.
+	# Set to 1 for 1MiB, 2 for 2MiB, etc. Set to 0 to disable.
+	# This setting is overriden by data_alignment and the --dataalignment
+	# option.
+	# This configuration option has an automatic default value.
+	# default_data_alignment = 1
+
+	# Configuration option devices/data_alignment_detection.
+	# Align the start of a PV data area with sysfs io properties.
+	# The start of a PV data area will be a multiple of minimum_io_size or
+	# optimal_io_size exposed in sysfs. minimum_io_size is the smallest
+	# request the device can perform without incurring a read-modify-write
+	# penalty, e.g. MD chunk size. optimal_io_size is the device's
+	# preferred unit of receiving I/O, e.g. MD stripe width.
+	# minimum_io_size is used if optimal_io_size is undefined (0).
+	# If md_chunk_alignment is enabled, that detects the optimal_io_size.
+	# default_data_alignment and md_chunk_alignment will be overriden
+	# if they are not aligned with the value detected for this setting.
+	# This setting is overriden by data_alignment and the --dataalignment
+	# option.
+	data_alignment_detection = 1
+
+	# Configuration option devices/data_alignment.
+	# Align the start of a PV data area with this number of KiB.
+	# When non-zero, this setting overrides default_data_alignment.
+	# Set to 0 to disable, in which case default_data_alignment
+	# is used to align the first PE in units of MiB.
+	# This setting is overriden by the --dataalignment option.
+	data_alignment = 0
+
+	# Configuration option devices/data_alignment_offset_detection.
+	# Shift the start of an aligned PV data area based on sysfs information.
+	# After a PV data area is aligned, it will be shifted by the
+	# alignment_offset exposed in sysfs. This offset is often 0, but may
+	# be non-zero. Certain 4KiB sector drives that compensate for windows
+	# partitioning will have an alignment_offset of 3584 bytes (sector 7
+	# is the lowest aligned logical block, the 4KiB sectors start at
+	# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
+	# This setting is overriden by the --dataalignmentoffset option.
+	data_alignment_offset_detection = 1
+
+	# Configuration option devices/ignore_suspended_devices.
+	# Ignore DM devices that have I/O suspended while scanning devices.
+	# Otherwise, LVM waits for a suspended device to become accessible.
+	# This should only be needed in recovery situations.
+	ignore_suspended_devices = 0
+
+	# Configuration option devices/ignore_lvm_mirrors.
+	# Do not scan 'mirror' LVs to avoid possible deadlocks.
+	# This avoids possible deadlocks when using the 'mirror' segment type.
+	# This setting determines whether LVs using the 'mirror' segment type
+	# are scanned for LVM labels. This affects the ability of mirrors to
+	# be used as physical volumes. If this setting is enabled, it is
+	# impossible to create VGs on top of mirror LVs, i.e. to stack VGs on
+	# mirror LVs. If this setting is disabled, allowing mirror LVs to be
+	# scanned, it may cause LVM processes and I/O to the mirror to become
+	# blocked. This is due to the way that the mirror segment type handles
+	# failures. In order for the hang to occur, an LVM command must be run
+	# just after a failure and before the automatic LVM repair process
+	# takes place, or there must be failures in multiple mirrors in the
+	# same VG at the same time with write failures occurring moments before
+	# a scan of the mirror's labels. The 'mirror' scanning problems do not
+	# apply to LVM RAID types like 'raid1' which handle failures in a
+	# different way, making them a better choice for VG stacking.
+	ignore_lvm_mirrors = 1
+
+	# Configuration option devices/require_restorefile_with_uuid.
+	# Allow use of pvcreate --uuid without requiring --restorefile.
+	require_restorefile_with_uuid = 1
+
+	# Configuration option devices/pv_min_size.
+	# Minimum size in KiB of block devices which can be used as PVs.
+	# In a clustered environment all nodes must use the same value.
+	# Any value smaller than 512KiB is ignored. The previous built-in
+	# value was 512.
+	pv_min_size = 2048
+
+	# Configuration option devices/issue_discards.
+	# Issue discards to PVs that are no longer used by an LV.
+	# Discards are sent to an LV's underlying physical volumes when the LV
+	# is no longer using the physical volumes' space, e.g. lvremove,
+	# lvreduce. Discards inform the storage that a region is no longer
+	# used. Storage that supports discards advertise the protocol-specific
+	# way discards should be issued by the kernel (TRIM, UNMAP, or
+	# WRITE SAME with UNMAP bit set). Not all storage will support or
+	# benefit from discards, but SSDs and thinly provisioned LUNs
+	# generally do. If enabled, discards will only be issued if both the
+	# storage and kernel provide support.
+	issue_discards = 0
+
+	# Configuration option devices/allow_changes_with_duplicate_pvs.
+	# Allow VG modification while a PV appears on multiple devices.
+	# When a PV appears on multiple devices, LVM attempts to choose the
+	# best device to use for the PV. If the devices represent the same
+	# underlying storage, the choice has minimal consequence. If the
+	# devices represent different underlying storage, the wrong choice
+	# can result in data loss if the VG is modified. Disabling this
+	# setting is the safest option because it prevents modifying a VG
+	# or activating LVs in it while a PV appears on multiple devices.
+	# Enabling this setting allows the VG to be used as usual even with
+	# uncertain devices.
+	allow_changes_with_duplicate_pvs = 0
+}
+
+# Configuration section allocation.
+# How LVM selects space and applies properties to LVs.
+allocation {
+
+	# Configuration option allocation/cling_tag_list.
+	# Advise LVM which PVs to use when searching for new space.
+	# When searching for free space to extend an LV, the 'cling' allocation
+	# policy will choose space on the same PVs as the last segment of the
+	# existing LV. If there is insufficient space and a list of tags is
+	# defined here, it will check whether any of them are attached to the
+	# PVs concerned and then seek to match those PV tags between existing
+	# extents and new extents.
+	# 
+	# Example
+	# Use the special tag "@*" as a wildcard to match any PV tag:
+	# cling_tag_list = [ "@*" ]
+	# LVs are mirrored between two sites within a single VG, and
+	# PVs are tagged with either @site1 or @site2 to indicate where
+	# they are situated:
+	# cling_tag_list = [ "@site1", "@site2" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option allocation/maximise_cling.
+	# Use a previous allocation algorithm.
+	# Changes made in version 2.02.85 extended the reach of the 'cling'
+	# policies to detect more situations where data can be grouped onto
+	# the same disks. This setting can be used to disable the changes
+	# and revert to the previous algorithm.
+	maximise_cling = 1
+
+	# Configuration option allocation/use_blkid_wiping.
+	# Use blkid to detect and erase existing signatures on new PVs and LVs.
+	# The blkid library can detect more signatures than the native LVM
+	# detection code, but may take longer. LVM needs to be compiled with
+	# blkid wiping support for this setting to apply. LVM native detection
+	# code is currently able to recognize: MD device signatures,
+	# swap signature, and LUKS signatures. To see the list of signatures
+	# recognized by blkid, check the output of the 'blkid -k' command.
+	use_blkid_wiping = 1
+
+	# Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
+	# Look for and erase any signatures while zeroing a new LV.
+	# The --wipesignatures option overrides this setting.
+	# Zeroing is controlled by the -Z/--zero option, and if not specified,
+	# zeroing is used by default if possible. Zeroing simply overwrites the
+	# first 4KiB of a new LV with zeroes and does no signature detection or
+	# wiping. Signature wiping goes beyond zeroing and detects exact types
+	# and positions of signatures within the whole LV. It provides a
+	# cleaner LV after creation as all known signatures are wiped. The LV
+	# is not claimed incorrectly by other tools because of old signatures
+	# from previous use. The number of signatures that LVM can detect
+	# depends on the detection code that is selected (see
+	# use_blkid_wiping.) Wiping each detected signature must be confirmed.
+	# When this setting is disabled, signatures on new LVs are not detected
+	# or erased unless the --wipesignatures option is used directly.
+	wipe_signatures_when_zeroing_new_lvs = 1
+
+	# Configuration option allocation/mirror_logs_require_separate_pvs.
+	# Mirror logs and images will always use different PVs.
+	# The default setting changed in version 2.02.85.
+	mirror_logs_require_separate_pvs = 0
+
+	# Configuration option allocation/raid_stripe_all_devices.
+	# Stripe across all PVs when RAID stripes are not specified.
+	# If enabled, all PVs in the VG or on the command line are used for
+	# raid0/4/5/6/10 when the command does not specify the number of
+	# stripes to use.
+	# This was the default behaviour until release 2.02.162.
+	# This configuration option has an automatic default value.
+	# raid_stripe_all_devices = 0
+
+	# Configuration option allocation/cache_pool_metadata_require_separate_pvs.
+	# Cache pool metadata and data will always use different PVs.
+	cache_pool_metadata_require_separate_pvs = 0
+
+	# Configuration option allocation/cache_metadata_format.
+	# Sets default metadata format for new cache.
+	# 
+	# Accepted values:
+	#   0  Automatically detected best available format
+	#   1  Original format
+	#   2  Improved 2nd. generation format
+	# 
+	# This configuration option has an automatic default value.
+	# cache_metadata_format = 0
+
+	# Configuration option allocation/cache_mode.
+	# The default cache mode used for new cache.
+	# 
+	# Accepted values:
+	#   writethrough
+	#     Data blocks are immediately written from the cache to disk.
+	#   writeback
+	#     Data blocks are written from the cache back to disk after some
+	#     delay to improve performance.
+	# 
+	# This setting replaces allocation/cache_pool_cachemode.
+	# This configuration option has an automatic default value.
+	# cache_mode = "writethrough"
+
+	# Configuration option allocation/cache_policy.
+	# The default cache policy used for new cache volume.
+	# Since kernel 4.2 the default policy is smq (Stochastic multiqueue),
+	# otherwise the older mq (Multiqueue) policy is selected.
+	# This configuration option does not have a default value defined.
+
+	# Configuration section allocation/cache_settings.
+	# Settings for the cache policy.
+	# See documentation for individual cache policies for more info.
+	# This configuration section has an automatic default value.
+	# cache_settings {
+	# }
+
+	# Configuration option allocation/cache_pool_chunk_size.
+	# The minimal chunk size in KiB for cache pool volumes.
+	# Using a chunk_size that is too large can result in wasteful use of
+	# the cache, where small reads and writes can cause large sections of
+	# an LV to be mapped into the cache. However, choosing a chunk_size
+	# that is too small can result in more overhead trying to manage the
+	# numerous chunks that become mapped into the cache. The former is
+	# more of a problem than the latter in most cases, so the default is
+	# on the smaller end of the spectrum. Supported values range from
+	# 32KiB to 1GiB in multiples of 32.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option allocation/cache_pool_max_chunks.
+	# The maximum number of chunks in a cache pool.
+	# For cache target v1.9 the recommended maximumm is 1000000 chunks.
+	# Using cache pool with more chunks may degrade cache performance.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option allocation/thin_pool_metadata_require_separate_pvs.
+	# Thin pool metdata and data will always use different PVs.
+	thin_pool_metadata_require_separate_pvs = 0
+
+	# Configuration option allocation/thin_pool_zero.
+	# Thin pool data chunks are zeroed before they are first used.
+	# Zeroing with a larger thin pool chunk size reduces performance.
+	# This configuration option has an automatic default value.
+	# thin_pool_zero = 1
+
+	# Configuration option allocation/thin_pool_discards.
+	# The discards behaviour of thin pool volumes.
+	# 
+	# Accepted values:
+	#   ignore
+	#   nopassdown
+	#   passdown
+	# 
+	# This configuration option has an automatic default value.
+	# thin_pool_discards = "passdown"
+
+	# Configuration option allocation/thin_pool_chunk_size_policy.
+	# The chunk size calculation policy for thin pool volumes.
+	# 
+	# Accepted values:
+	#   generic
+	#     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
+	#     the chunk size based on estimation and device hints exposed in
+	#     sysfs - the minimum_io_size. The chunk size is always at least
+	#     64KiB.
+	#   performance
+	#     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
+	#     the chunk size for performance based on device hints exposed in
+	#     sysfs - the optimal_io_size. The chunk size is always at least
+	#     512KiB.
+	# 
+	# This configuration option has an automatic default value.
+	# thin_pool_chunk_size_policy = "generic"
+
+	# Configuration option allocation/thin_pool_chunk_size.
+	# The minimal chunk size in KiB for thin pool volumes.
+	# Larger chunk sizes may improve performance for plain thin volumes,
+	# however using them for snapshot volumes is less efficient, as it
+	# consumes more space and takes extra time for copying. When unset,
+	# lvm tries to estimate chunk size starting from 64KiB. Supported
+	# values are in the range 64KiB to 1GiB.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option allocation/physical_extent_size.
+	# Default physical extent size in KiB to use for new VGs.
+	# This configuration option has an automatic default value.
+	# physical_extent_size = 4096
+
+	# Configuration option allocation/vdo_use_compression.
+	# Enables or disables compression when creating a VDO volume.
+	# Compression may be disabled if necessary to maximize performance
+	# or to speed processing of data that is unlikely to compress.
+	# This configuration option has an automatic default value.
+	# vdo_use_compression = 1
+
+	# Configuration option allocation/vdo_use_deduplication.
+	# Enables or disables deduplication when creating a VDO volume.
+	# Deduplication may be disabled in instances where data is not expected
+	# to have good deduplication rates but compression is still desired.
+	# This configuration option has an automatic default value.
+	# vdo_use_deduplication = 1
+
+	# Configuration option allocation/vdo_emulate_512_sectors.
+	# Specifies that the VDO volume is to emulate a 512 byte block device.
+	# This configuration option has an automatic default value.
+	# vdo_emulate_512_sectors = 0
+
+	# Configuration option allocation/vdo_block_map_cache_size_mb.
+	# Specifies the amount of memory in MiB allocated for caching block map
+	# pages for VDO volume. The value must be a multiple of 4096 and must be
+	# at least 128MiB and less than 16TiB. The cache must be at least 16MiB
+	# per logical thread. Note that there is a memory overhead of 15%.
+	# This configuration option has an automatic default value.
+	# vdo_block_map_cache_size_mb = 128
+
+	# Configuration option allocation/vdo_block_map_period.
+	# Tunes the quantity of block map updates that can accumulate
+	# before cache pages are flushed to disk. The value must be
+	# at least 1 and less then 16380.
+	# A lower value means shorter recovery time but lower performance.
+	# This configuration option has an automatic default value.
+	# vdo_block_map_period = 16380
+
+	# Configuration option allocation/vdo_check_point_frequency.
+	# The default check point frequency for VDO volume.
+	# This configuration option has an automatic default value.
+	# vdo_check_point_frequency = 0
+
+	# Configuration option allocation/vdo_use_sparse_index.
+	# Enables sparse indexing for VDO volume.
+	# This configuration option has an automatic default value.
+	# vdo_use_sparse_index = 0
+
+	# Configuration option allocation/vdo_index_memory_size_mb.
+	# Specifies the amount of index memory in MiB for VDO volume.
+	# The value must be at least 256MiB and at most 1TiB.
+	# This configuration option has an automatic default value.
+	# vdo_index_memory_size_mb = 256
+
+	# Configuration option allocation/vdo_use_read_cache.
+	# Enables or disables the read cache within the VDO volume.
+	# The cache should be enabled if write workloads are expected
+	# to have high levels of deduplication, or for read intensive
+	# workloads of highly compressible data.
+	# This configuration option has an automatic default value.
+	# vdo_use_read_cache = 0
+
+	# Configuration option allocation/vdo_read_cache_size_mb.
+	# Specifies the extra VDO volume read cache size in MiB.
+	# This space is in addition to a system-defined minimum.
+	# The value must be less then 16TiB and 1.12 MiB of memory
+	# will be used per MiB of read cache specified, per bio thread.
+	# This configuration option has an automatic default value.
+	# vdo_read_cache_size_mb = 0
+
+	# Configuration option allocation/vdo_slab_size_mb.
+	# Specifies the size in MiB of the increment by which a VDO is grown.
+	# Using a smaller size constrains the total maximum physical size
+	# that can be accommodated. Must be a power of two between 128MiB and 32GiB.
+	# This configuration option has an automatic default value.
+	# vdo_slab_size_mb = 2048
+
+	# Configuration option allocation/vdo_ack_threads.
+	# Specifies the number of threads to use for acknowledging
+	# completion of requested VDO I/O operations.
+	# The value must be at in range [0..100].
+	# This configuration option has an automatic default value.
+	# vdo_ack_threads = 1
+
+	# Configuration option allocation/vdo_bio_threads.
+	# Specifies the number of threads to use for submitting I/O
+	# operations to the storage device of VDO volume.
+	# The value must be in range [1..100]
+	# Each additional thread after the first will use an additional 18MiB of RAM,
+	# plus 1.12 MiB of RAM per megabyte of configured read cache size.
+	# This configuration option has an automatic default value.
+	# vdo_bio_threads = 1
+
+	# Configuration option allocation/vdo_bio_rotation.
+	# Specifies the number of I/O operations to enqueue for each bio-submission
+	# thread before directing work to the next. The value must be in range [1..1024].
+	# This configuration option has an automatic default value.
+	# vdo_bio_rotation = 64
+
+	# Configuration option allocation/vdo_cpu_threads.
+	# Specifies the number of threads to use for CPU-intensive work such as
+	# hashing or compression for VDO volume. The value must be in range [1..100]
+	# This configuration option has an automatic default value.
+	# vdo_cpu_threads = 2
+
+	# Configuration option allocation/vdo_hash_zone_threads.
+	# Specifies the number of threads across which to subdivide parts of the VDO
+	# processing based on the hash value computed from the block data.
+	# The value must be at in range [0..100].
+	# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
+	# either all zero or all non-zero.
+	# This configuration option has an automatic default value.
+	# vdo_hash_zone_threads = 1
+
+	# Configuration option allocation/vdo_logical_threads.
+	# Specifies the number of threads across which to subdivide parts of the VDO
+	# processing based on the hash value computed from the block data.
+	# A logical thread count of 9 or more will require explicitly specifying
+	# a sufficiently large block map cache size, as well.
+	# The value must be in range [0..100].
+	# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
+	# either all zero or all non-zero.
+	# This configuration option has an automatic default value.
+	# vdo_logical_threads = 1
+
+	# Configuration option allocation/vdo_physical_threads.
+	# Specifies the number of threads across which to subdivide parts of the VDO
+	# processing based on physical block addresses.
+	# Each additional thread after the first will use an additional 10MiB of RAM.
+	# The value must be in range [0..16].
+	# vdo_hash_zone_threads, vdo_logical_threads and vdo_physical_threads must be
+	# either all zero or all non-zero.
+	# This configuration option has an automatic default value.
+	# vdo_physical_threads = 1
+
+	# Configuration option allocation/vdo_write_policy.
+	# Specifies the write policy:
+	# auto  - VDO will check the storage device and determine whether it supports flushes.
+	#         If it does, VDO will run in async mode, otherwise it will run in sync mode.
+	# sync  - Writes are acknowledged only after data is stably written.
+	#         This policy is not supported if the underlying storage is not also synchronous.
+	# async - Writes are acknowledged after data has been cached for writing to stable storage.
+	#         Data which has not been flushed is not guaranteed to persist in this mode.
+	# This configuration option has an automatic default value.
+	# vdo_write_policy = "auto"
+}
+
+# Configuration section log.
+# How LVM log information is reported.
+log {
+
+	# Configuration option log/report_command_log.
+	# Enable or disable LVM log reporting.
+	# If enabled, LVM will collect a log of operations, messages,
+	# per-object return codes with object identification and associated
+	# error numbers (errnos) during LVM command processing. Then the
+	# log is either reported solely or in addition to any existing
+	# reports, depending on LVM command used. If it is a reporting command
+	# (e.g. pvs, vgs, lvs, lvm fullreport), then the log is reported in
+	# addition to any existing reports. Otherwise, there's only log report
+	# on output. For all applicable LVM commands, you can request that
+	# the output has only log report by using --logonly command line
+	# option. Use log/command_log_cols and log/command_log_sort settings
+	# to define fields to display and sort fields for the log report.
+	# You can also use log/command_log_selection to define selection
+	# criteria used each time the log is reported.
+	# This configuration option has an automatic default value.
+	# report_command_log = 0
+
+	# Configuration option log/command_log_sort.
+	# List of columns to sort by when reporting command log.
+	# See <lvm command> --logonly --configreport log -o help
+	# for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# command_log_sort = "log_seq_num"
+
+	# Configuration option log/command_log_cols.
+	# List of columns to report when reporting command log.
+	# See <lvm command> --logonly --configreport log -o help
+	# for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# command_log_cols = "log_seq_num,log_type,log_context,log_object_type,log_object_name,log_object_id,log_object_group,log_object_group_id,log_message,log_errno,log_ret_code"
+
+	# Configuration option log/command_log_selection.
+	# Selection criteria used when reporting command log.
+	# You can define selection criteria that are applied each
+	# time log is reported. This way, it is possible to control the
+	# amount of log that is displayed on output and you can select
+	# only parts of the log that are important for you. To define
+	# selection criteria, use fields from log report. See also
+	# <lvm command> --logonly --configreport log -S help for the
+	# list of possible fields and selection operators. You can also
+	# define selection criteria for log report on command line directly
+	# using <lvm command> --configreport log -S <selection criteria>
+	# which has precedence over log/command_log_selection setting.
+	# For more information about selection criteria in general, see
+	# lvm(8) man page.
+	# This configuration option has an automatic default value.
+	# command_log_selection = "!(log_type=status && message=success)"
+
+	# Configuration option log/verbose.
+	# Controls the messages sent to stdout or stderr.
+	verbose = 0
+
+	# Configuration option log/silent.
+	# Suppress all non-essential messages from stdout.
+	# This has the same effect as -qq. When enabled, the following commands
+	# still produce output: dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck,
+	# pvdisplay, pvs, version, vgcfgrestore -l, vgdisplay, vgs.
+	# Non-essential messages are shifted from log level 4 to log level 5
+	# for syslog and lvm2_log_fn purposes.
+	# Any 'yes' or 'no' questions not overridden by other arguments are
+	# suppressed and default to 'no'.
+	silent = 0
+
+	# Configuration option log/syslog.
+	# Send log messages through syslog.
+	syslog = 1
+
+	# Configuration option log/file.
+	# Write error and debug log messages to a file specified here.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option log/overwrite.
+	# Overwrite the log file each time the program is run.
+	overwrite = 0
+
+	# Configuration option log/level.
+	# The level of log messages that are sent to the log file or syslog.
+	# There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
+	# 7 is the most verbose (LOG_DEBUG).
+	level = 0
+
+	# Configuration option log/indent.
+	# Indent messages according to their severity.
+	indent = 1
+
+	# Configuration option log/command_names.
+	# Display the command name on each line of output.
+	command_names = 0
+
+	# Configuration option log/prefix.
+	# A prefix to use before the log message text.
+	# (After the command name, if selected).
+	# Two spaces allows you to see/grep the severity of each message.
+	# To make the messages look similar to the original LVM tools use:
+	# indent = 0, command_names = 1, prefix = " -- "
+	prefix = "  "
+
+	# Configuration option log/activation.
+	# Log messages during activation.
+	# Don't use this in low memory situations (can deadlock).
+	activation = 0
+
+	# Configuration option log/debug_classes.
+	# Select log messages by class.
+	# Some debugging messages are assigned to a class and only appear in
+	# debug output if the class is listed here. Classes currently
+	# available: memory, devices, io, activation, allocation,
+	# metadata, cache, locking, lvmpolld. Use "all" to see everything.
+	debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ]
+}
+
+# Configuration section backup.
+# How LVM metadata is backed up and archived.
+# In LVM, a 'backup' is a copy of the metadata for the current system,
+# and an 'archive' contains old metadata configurations. They are
+# stored in a human readable text format.
+backup {
+
+	# Configuration option backup/backup.
+	# Maintain a backup of the current metadata configuration.
+	# Think very hard before turning this off!
+	backup = 1
+
+	# Configuration option backup/backup_dir.
+	# Location of the metadata backup files.
+	# Remember to back up this directory regularly!
+	backup_dir = "/etc/lvm/backup"
+
+	# Configuration option backup/archive.
+	# Maintain an archive of old metadata configurations.
+	# Think very hard before turning this off.
+	archive = 1
+
+	# Configuration option backup/archive_dir.
+	# Location of the metdata archive files.
+	# Remember to back up this directory regularly!
+	archive_dir = "/etc/lvm/archive"
+
+	# Configuration option backup/retain_min.
+	# Minimum number of archives to keep.
+	retain_min = 10
+
+	# Configuration option backup/retain_days.
+	# Minimum number of days to keep archive files.
+	retain_days = 30
+}
+
+# Configuration section shell.
+# Settings for running LVM in shell (readline) mode.
+shell {
+
+	# Configuration option shell/history_size.
+	# Number of lines of history to store in ~/.lvm_history.
+	history_size = 100
+}
+
+# Configuration section global.
+# Miscellaneous global LVM settings.
+global {
+
+	# Configuration option global/umask.
+	# The file creation mask for any files and directories created.
+	# Interpreted as octal if the first digit is zero.
+	umask = 077
+
+	# Configuration option global/test.
+	# No on-disk metadata changes will be made in test mode.
+	# Equivalent to having the -t option on every command.
+	test = 0
+
+	# Configuration option global/units.
+	# Default value for --units argument.
+	units = "r"
+
+	# Configuration option global/si_unit_consistency.
+	# Distinguish between powers of 1024 and 1000 bytes.
+	# The LVM commands distinguish between powers of 1024 bytes,
+	# e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
+	# If scripts depend on the old behaviour, disable this setting
+	# temporarily until they are updated.
+	si_unit_consistency = 1
+
+	# Configuration option global/suffix.
+	# Display unit suffix for sizes.
+	# This setting has no effect if the units are in human-readable form
+	# (global/units = "h") in which case the suffix is always displayed.
+	suffix = 1
+
+	# Configuration option global/activation.
+	# Enable/disable communication with the kernel device-mapper.
+	# Disable to use the tools to manipulate LVM metadata without
+	# activating any logical volumes. If the device-mapper driver
+	# is not present in the kernel, disabling this should suppress
+	# the error messages.
+	activation = 1
+
+	# Configuration option global/segment_libraries.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option global/proc.
+	# Location of proc filesystem.
+	# This configuration option is advanced.
+	proc = "/proc"
+
+	# Configuration option global/etc.
+	# Location of /etc system configuration directory.
+	etc = "/etc"
+
+	# Configuration option global/wait_for_locks.
+	# When disabled, fail if a lock request would block.
+	wait_for_locks = 1
+
+	# Configuration option global/locking_dir.
+	# Directory to use for LVM command file locks.
+	# Local non-LV directory that holds file-based locks while commands are
+	# in progress. A directory like /tmp that may get wiped on reboot is OK.
+	locking_dir = "/run/lock/lvm"
+
+	# Configuration option global/prioritise_write_locks.
+	# Allow quicker VG write access during high volume read access.
+	# When there are competing read-only and read-write access requests for
+	# a volume group's metadata, instead of always granting the read-only
+	# requests immediately, delay them to allow the read-write requests to
+	# be serviced. Without this setting, write access may be stalled by a
+	# high volume of read-only requests. This option only affects
+	# locking_type 1 viz. local file-based locking.
+	prioritise_write_locks = 1
+
+	# Configuration option global/library_dir.
+	# Search this directory first for shared libraries.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option global/abort_on_internal_errors.
+	# Abort a command that encounters an internal error.
+	# Treat any internal errors as fatal errors, aborting the process that
+	# encountered the internal error. Please only enable for debugging.
+	abort_on_internal_errors = 0
+
+	# Configuration option global/metadata_read_only.
+	# No operations that change on-disk metadata are permitted.
+	# Additionally, read-only commands that encounter metadata in need of
+	# repair will still be allowed to proceed exactly as if the repair had
+	# been performed (except for the unchanged vg_seqno). Inappropriate
+	# use could mess up your system, so seek advice first!
+	metadata_read_only = 0
+
+	# Configuration option global/mirror_segtype_default.
+	# The segment type used by the short mirroring option -m.
+	# The --type mirror|raid1 option overrides this setting.
+	# 
+	# Accepted values:
+	#   mirror
+	#     The original RAID1 implementation from LVM/DM. It is
+	#     characterized by a flexible log solution (core, disk, mirrored),
+	#     and by the necessity to block I/O while handling a failure.
+	#     There is an inherent race in the dmeventd failure handling logic
+	#     with snapshots of devices using this type of RAID1 that in the
+	#     worst case could cause a deadlock. (Also see
+	#     devices/ignore_lvm_mirrors.)
+	#   raid1
+	#     This is a newer RAID1 implementation using the MD RAID1
+	#     personality through device-mapper. It is characterized by a
+	#     lack of log options. (A log is always allocated for every
+	#     device and they are placed on the same device as the image,
+	#     so no separate devices are required.) This mirror
+	#     implementation does not require I/O to be blocked while
+	#     handling a failure. This mirror implementation is not
+	#     cluster-aware and cannot be used in a shared (active/active)
+	#     fashion in a cluster.
+	# 
+	mirror_segtype_default = "raid1"
+
+	# Configuration option global/raid10_segtype_default.
+	# The segment type used by the -i -m combination.
+	# The --type raid10|mirror option overrides this setting.
+	# The --stripes/-i and --mirrors/-m options can both be specified
+	# during the creation of a logical volume to use both striping and
+	# mirroring for the LV. There are two different implementations.
+	# 
+	# Accepted values:
+	#   raid10
+	#     LVM uses MD's RAID10 personality through DM. This is the
+	#     preferred option.
+	#   mirror
+	#     LVM layers the 'mirror' and 'stripe' segment types. The layering
+	#     is done by creating a mirror LV on top of striped sub-LVs,
+	#     effectively creating a RAID 0+1 array. The layering is suboptimal
+	#     in terms of providing redundancy and performance.
+	# 
+	raid10_segtype_default = "raid10"
+
+	# Configuration option global/sparse_segtype_default.
+	# The segment type used by the -V -L combination.
+	# The --type snapshot|thin option overrides this setting.
+	# The combination of -V and -L options creates a sparse LV. There are
+	# two different implementations.
+	# 
+	# Accepted values:
+	#   snapshot
+	#     The original snapshot implementation from LVM/DM. It uses an old
+	#     snapshot that mixes data and metadata within a single COW
+	#     storage volume and performs poorly when the size of stored data
+	#     passes hundreds of MB.
+	#   thin
+	#     A newer implementation that uses thin provisioning. It has a
+	#     bigger minimal chunk size (64KiB) and uses a separate volume for
+	#     metadata. It has better performance, especially when more data
+	#     is used. It also supports full snapshots.
+	# 
+	sparse_segtype_default = "thin"
+
+	# Configuration option global/lvdisplay_shows_full_device_path.
+	# Enable this to reinstate the previous lvdisplay name format.
+	# The default format for displaying LV names in lvdisplay was changed
+	# in version 2.02.89 to show the LV name and path separately.
+	# Previously this was always shown as /dev/vgname/lvname even when that
+	# was never a valid path in the /dev filesystem.
+	# This configuration option has an automatic default value.
+	# lvdisplay_shows_full_device_path = 0
+
+	# Configuration option global/event_activation.
+	# Activate LVs based on system-generated device events.
+	# When a device appears on the system, a system-generated event runs
+	# the pvscan command to activate LVs if the new PV completes the VG.
+	# Use auto_activation_volume_list to select which LVs should be
+	# activated from these events (the default is all.)
+	# When event_activation is disabled, the system will generally run
+	# a direct activation command to activate LVs in complete VGs.
+	event_activation = 1
+
+	# Configuration option global/use_aio.
+	# Use async I/O when reading and writing devices.
+	# This configuration option has an automatic default value.
+	# use_aio = 1
+
+	# Configuration option global/use_lvmlockd.
+	# Use lvmlockd for locking among hosts using LVM on shared storage.
+	# Applicable only if LVM is compiled with lockd support in which
+	# case there is also lvmlockd(8) man page available for more
+	# information.
+	use_lvmlockd = 0
+
+	# Configuration option global/lvmlockd_lock_retries.
+	# Retry lvmlockd lock requests this many times.
+	# Applicable only if LVM is compiled with lockd support
+	# This configuration option has an automatic default value.
+	# lvmlockd_lock_retries = 3
+
+	# Configuration option global/sanlock_lv_extend.
+	# Size in MiB to extend the internal LV holding sanlock locks.
+	# The internal LV holds locks for each LV in the VG, and after enough
+	# LVs have been created, the internal LV needs to be extended. lvcreate
+	# will automatically extend the internal LV when needed by the amount
+	# specified here. Setting this to 0 disables the automatic extension
+	# and can cause lvcreate to fail. Applicable only if LVM is compiled
+	# with lockd support
+	# This configuration option has an automatic default value.
+	# sanlock_lv_extend = 256
+
+	# Configuration option global/thin_check_executable.
+	# The full path to the thin_check command.
+	# LVM uses this command to check that a thin metadata device is in a
+	# usable state. When a thin pool is activated and after it is
+	# deactivated, this command is run. Activation will only proceed if
+	# the command has an exit status of 0. Set to "" to skip this check.
+	# (Not recommended.) Also see thin_check_options.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# thin_check_executable = "/usr/sbin/thin_check"
+
+	# Configuration option global/thin_dump_executable.
+	# The full path to the thin_dump command.
+	# LVM uses this command to dump thin pool metadata.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# thin_dump_executable = "/usr/sbin/thin_dump"
+
+	# Configuration option global/thin_repair_executable.
+	# The full path to the thin_repair command.
+	# LVM uses this command to repair a thin metadata device if it is in
+	# an unusable state. Also see thin_repair_options.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# thin_repair_executable = "/usr/sbin/thin_repair"
+
+	# Configuration option global/thin_check_options.
+	# List of options passed to the thin_check command.
+	# With thin_check version 2.1 or newer you can add the option
+	# --ignore-non-fatal-errors to let it pass through ignorable errors
+	# and fix them later. With thin_check version 3.2 or newer you should
+	# include the option --clear-needs-check-flag.
+	# This configuration option has an automatic default value.
+	# thin_check_options = [ "-q", "--clear-needs-check-flag" ]
+
+	# Configuration option global/thin_repair_options.
+	# List of options passed to the thin_repair command.
+	# This configuration option has an automatic default value.
+	# thin_repair_options = [ "" ]
+
+	# Configuration option global/thin_disabled_features.
+	# Features to not use in the thin driver.
+	# This can be helpful for testing, or to avoid using a feature that is
+	# causing problems. Features include: block_size, discards,
+	# discards_non_power_2, external_origin, metadata_resize,
+	# external_origin_extend, error_if_no_space.
+	# 
+	# Example
+	# thin_disabled_features = [ "discards", "block_size" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option global/cache_disabled_features.
+	# Features to not use in the cache driver.
+	# This can be helpful for testing, or to avoid using a feature that is
+	# causing problems. Features include: policy_mq, policy_smq, metadata2.
+	# 
+	# Example
+	# cache_disabled_features = [ "policy_smq" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option global/cache_check_executable.
+	# The full path to the cache_check command.
+	# LVM uses this command to check that a cache metadata device is in a
+	# usable state. When a cached LV is activated and after it is
+	# deactivated, this command is run. Activation will only proceed if the
+	# command has an exit status of 0. Set to "" to skip this check.
+	# (Not recommended.) Also see cache_check_options.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# cache_check_executable = "/usr/sbin/cache_check"
+
+	# Configuration option global/cache_dump_executable.
+	# The full path to the cache_dump command.
+	# LVM uses this command to dump cache pool metadata.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# cache_dump_executable = "/usr/sbin/cache_dump"
+
+	# Configuration option global/cache_repair_executable.
+	# The full path to the cache_repair command.
+	# LVM uses this command to repair a cache metadata device if it is in
+	# an unusable state. Also see cache_repair_options.
+	# (See package device-mapper-persistent-data or thin-provisioning-tools)
+	# This configuration option has an automatic default value.
+	# cache_repair_executable = "/usr/sbin/cache_repair"
+
+	# Configuration option global/cache_check_options.
+	# List of options passed to the cache_check command.
+	# With cache_check version 5.0 or newer you should include the option
+	# --clear-needs-check-flag.
+	# This configuration option has an automatic default value.
+	# cache_check_options = [ "-q", "--clear-needs-check-flag" ]
+
+	# Configuration option global/cache_repair_options.
+	# List of options passed to the cache_repair command.
+	# This configuration option has an automatic default value.
+	# cache_repair_options = [ "" ]
+
+	# Configuration option global/vdo_format_executable.
+	# The full path to the vdoformat command.
+	# LVM uses this command to initial data volume for VDO type logical volume
+	# This configuration option has an automatic default value.
+	# vdo_format_executable = "autodetect"
+
+	# Configuration option global/vdo_format_options.
+	# List of options passed added to standard vdoformat command.
+	# This configuration option has an automatic default value.
+	# vdo_format_options = [ "" ]
+
+	# Configuration option global/fsadm_executable.
+	# The full path to the fsadm command.
+	# LVM uses this command to help with lvresize -r operations.
+	# This configuration option has an automatic default value.
+	# fsadm_executable = "/sbin/fsadm"
+
+	# Configuration option global/system_id_source.
+	# The method LVM uses to set the local system ID.
+	# Volume Groups can also be given a system ID (by vgcreate, vgchange,
+	# or vgimport.) A VG on shared storage devices is accessible only to
+	# the host with a matching system ID. See 'man lvmsystemid' for
+	# information on limitations and correct usage.
+	# 
+	# Accepted values:
+	#   none
+	#     The host has no system ID.
+	#   lvmlocal
+	#     Obtain the system ID from the system_id setting in the 'local'
+	#     section of an lvm configuration file, e.g. lvmlocal.conf.
+	#   uname
+	#     Set the system ID from the hostname (uname) of the system.
+	#     System IDs beginning localhost are not permitted.
+	#   machineid
+	#     Use the contents of the machine-id file to set the system ID.
+	#     Some systems create this file at installation time.
+	#     See 'man machine-id' and global/etc.
+	#   file
+	#     Use the contents of another file (system_id_file) to set the
+	#     system ID.
+	# 
+	system_id_source = "none"
+
+	# Configuration option global/system_id_file.
+	# The full path to the file containing a system ID.
+	# This is used when system_id_source is set to 'file'.
+	# Comments starting with the character # are ignored.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option global/use_lvmpolld.
+	# Use lvmpolld to supervise long running LVM commands.
+	# When enabled, control of long running LVM commands is transferred
+	# from the original LVM command to the lvmpolld daemon. This allows
+	# the operation to continue independent of the original LVM command.
+	# After lvmpolld takes over, the LVM command displays the progress
+	# of the ongoing operation. lvmpolld itself runs LVM commands to
+	# manage the progress of ongoing operations. lvmpolld can be used as
+	# a native systemd service, which allows it to be started on demand,
+	# and to use its own control group. When this option is disabled, LVM
+	# commands will supervise long running operations by forking themselves.
+	# Applicable only if LVM is compiled with lvmpolld support.
+	use_lvmpolld = 1
+
+	# Configuration option global/notify_dbus.
+	# Enable D-Bus notification from LVM commands.
+	# When enabled, an LVM command that changes PVs, changes VG metadata,
+	# or changes the activation state of an LV will send a notification.
+	notify_dbus = 1
+}
+
+# Configuration section activation.
+activation {
+
+	# Configuration option activation/checks.
+	# Perform internal checks of libdevmapper operations.
+	# Useful for debugging problems with activation. Some of the checks may
+	# be expensive, so it's best to use this only when there seems to be a
+	# problem.
+	checks = 0
+
+	# Configuration option activation/udev_sync.
+	# Use udev notifications to synchronize udev and LVM.
+	# The --nodevsync option overrides this setting.
+	# When disabled, LVM commands will not wait for notifications from
+	# udev, but continue irrespective of any possible udev processing in
+	# the background. Only use this if udev is not running or has rules
+	# that ignore the devices LVM creates. If enabled when udev is not
+	# running, and LVM processes are waiting for udev, run the command
+	# 'dmsetup udevcomplete_all' to wake them up.
+	udev_sync = 1
+
+	# Configuration option activation/udev_rules.
+	# Use udev rules to manage LV device nodes and symlinks.
+	# When disabled, LVM will manage the device nodes and symlinks for
+	# active LVs itself. Manual intervention may be required if this
+	# setting is changed while LVs are active.
+	udev_rules = 1
+
+	# Configuration option activation/verify_udev_operations.
+	# Use extra checks in LVM to verify udev operations.
+	# This enables additional checks (and if necessary, repairs) on entries
+	# in the device directory after udev has completed processing its
+	# events. Useful for diagnosing problems with LVM/udev interactions.
+	verify_udev_operations = 0
+
+	# Configuration option activation/retry_deactivation.
+	# Retry failed LV deactivation.
+	# If LV deactivation fails, LVM will retry for a few seconds before
+	# failing. This may happen because a process run from a quick udev rule
+	# temporarily opened the device.
+	retry_deactivation = 1
+
+	# Configuration option activation/missing_stripe_filler.
+	# Method to fill missing stripes when activating an incomplete LV.
+	# Using 'error' will make inaccessible parts of the device return I/O
+	# errors on access. Using 'zero' will return success (and zero) on I/O
+	# You can instead use a device path, in which case,
+	# that device will be used in place of missing stripes. Using anything
+	# other than 'error' with mirrored or snapshotted volumes is likely to
+	# result in data corruption.
+	# This configuration option is advanced.
+	missing_stripe_filler = "error"
+
+	# Configuration option activation/use_linear_target.
+	# Use the linear target to optimize single stripe LVs.
+	# When disabled, the striped target is used. The linear target is an
+	# optimised version of the striped target that only handles a single
+	# stripe.
+	use_linear_target = 1
+
+	# Configuration option activation/reserved_stack.
+	# Stack size in KiB to reserve for use while devices are suspended.
+	# Insufficent reserve risks I/O deadlock during device suspension.
+	reserved_stack = 64
+
+	# Configuration option activation/reserved_memory.
+	# Memory size in KiB to reserve for use while devices are suspended.
+	# Insufficent reserve risks I/O deadlock during device suspension.
+	reserved_memory = 8192
+
+	# Configuration option activation/process_priority.
+	# Nice value used while devices are suspended.
+	# Use a high priority so that LVs are suspended
+	# for the shortest possible time.
+	process_priority = -18
+
+	# Configuration option activation/volume_list.
+	# Only LVs selected by this list are activated.
+	# If this list is defined, an LV is only activated if it matches an
+	# entry in this list. If this list is undefined, it imposes no limits
+	# on LV activation (all are allowed).
+	# 
+	# Accepted values:
+	#   vgname
+	#     The VG name is matched exactly and selects all LVs in the VG.
+	#   vgname/lvname
+	#     The VG name and LV name are matched exactly and selects the LV.
+	#   @tag
+	#     Selects an LV if the specified tag matches a tag set on the LV
+	#     or VG.
+	#   @*
+	#     Selects an LV if a tag defined on the host is also set on the LV
+	#     or VG. See tags/hosttags. If any host tags exist but volume_list
+	#     is not defined, a default single-entry list containing '@*'
+	#     is assumed.
+	# 
+	# Example
+	# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option activation/auto_activation_volume_list.
+	# Only LVs selected by this list are auto-activated.
+	# This list works like volume_list, but it is used only by
+	# auto-activation commands. It does not apply to direct activation
+	# commands. If this list is defined, an LV is only auto-activated
+	# if it matches an entry in this list. If this list is undefined, it
+	# imposes no limits on LV auto-activation (all are allowed.) If this
+	# list is defined and empty, i.e. "[]", then no LVs are selected for
+	# auto-activation. An LV that is selected by this list for
+	# auto-activation, must also be selected by volume_list (if defined)
+	# before it is activated. Auto-activation is an activation command that
+	# includes the 'a' argument: --activate ay or -a ay. The 'a' (auto)
+	# argument for auto-activation is meant to be used by activation
+	# commands that are run automatically by the system, as opposed to LVM
+	# commands run directly by a user. A user may also use the 'a' flag
+	# directly to perform auto-activation. Also see pvscan(8) for more
+	# information about auto-activation.
+	# 
+	# Accepted values:
+	#   vgname
+	#     The VG name is matched exactly and selects all LVs in the VG.
+	#   vgname/lvname
+	#     The VG name and LV name are matched exactly and selects the LV.
+	#   @tag
+	#     Selects an LV if the specified tag matches a tag set on the LV
+	#     or VG.
+	#   @*
+	#     Selects an LV if a tag defined on the host is also set on the LV
+	#     or VG. See tags/hosttags. If any host tags exist but volume_list
+	#     is not defined, a default single-entry list containing '@*'
+	#     is assumed.
+	# 
+	# Example
+	# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option activation/read_only_volume_list.
+	# LVs in this list are activated in read-only mode.
+	# If this list is defined, each LV that is to be activated is checked
+	# against this list, and if it matches, it is activated in read-only
+	# mode. This overrides the permission setting stored in the metadata,
+	# e.g. from --permission rw.
+	# 
+	# Accepted values:
+	#   vgname
+	#     The VG name is matched exactly and selects all LVs in the VG.
+	#   vgname/lvname
+	#     The VG name and LV name are matched exactly and selects the LV.
+	#   @tag
+	#     Selects an LV if the specified tag matches a tag set on the LV
+	#     or VG.
+	#   @*
+	#     Selects an LV if a tag defined on the host is also set on the LV
+	#     or VG. See tags/hosttags. If any host tags exist but volume_list
+	#     is not defined, a default single-entry list containing '@*'
+	#     is assumed.
+	# 
+	# Example
+	# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+	# 
+	# This configuration option does not have a default value defined.
+
+	# Configuration option activation/raid_region_size.
+	# Size in KiB of each raid or mirror synchronization region.
+	# The clean/dirty state of data is tracked for each region.
+	# The value is rounded down to a power of two if necessary, and
+	# is ignored if it is not a multiple of the machine memory page size.
+	raid_region_size = 2048
+
+	# Configuration option activation/error_when_full.
+	# Return errors if a thin pool runs out of space.
+	# The --errorwhenfull option overrides this setting.
+	# When enabled, writes to thin LVs immediately return an error if the
+	# thin pool is out of data space. When disabled, writes to thin LVs
+	# are queued if the thin pool is out of space, and processed when the
+	# thin pool data space is extended. New thin pools are assigned the
+	# behavior defined here.
+	# This configuration option has an automatic default value.
+	# error_when_full = 0
+
+	# Configuration option activation/readahead.
+	# Setting to use when there is no readahead setting in metadata.
+	# 
+	# Accepted values:
+	#   none
+	#     Disable readahead.
+	#   auto
+	#     Use default value chosen by kernel.
+	# 
+	readahead = "auto"
+
+	# Configuration option activation/raid_fault_policy.
+	# Defines how a device failure in a RAID LV is handled.
+	# This includes LVs that have the following segment types:
+	# raid1, raid4, raid5*, and raid6*.
+	# If a device in the LV fails, the policy determines the steps
+	# performed by dmeventd automatically, and the steps perfomed by the
+	# manual command lvconvert --repair --use-policies.
+	# Automatic handling requires dmeventd to be monitoring the LV.
+	# 
+	# Accepted values:
+	#   warn
+	#     Use the system log to warn the user that a device in the RAID LV
+	#     has failed. It is left to the user to run lvconvert --repair
+	#     manually to remove or replace the failed device. As long as the
+	#     number of failed devices does not exceed the redundancy of the LV
+	#     (1 device for raid4/5, 2 for raid6), the LV will remain usable.
+	#   allocate
+	#     Attempt to use any extra physical volumes in the VG as spares and
+	#     replace faulty devices.
+	# 
+	raid_fault_policy = "warn"
+
+	# Configuration option activation/mirror_image_fault_policy.
+	# Defines how a device failure in a 'mirror' LV is handled.
+	# An LV with the 'mirror' segment type is composed of mirror images
+	# (copies) and a mirror log. A disk log ensures that a mirror LV does
+	# not need to be re-synced (all copies made the same) every time a
+	# machine reboots or crashes. If a device in the LV fails, this policy
+	# determines the steps perfomed by dmeventd automatically, and the steps
+	# performed by the manual command lvconvert --repair --use-policies.
+	# Automatic handling requires dmeventd to be monitoring the LV.
+	# 
+	# Accepted values:
+	#   remove
+	#     Simply remove the faulty device and run without it. If the log
+	#     device fails, the mirror would convert to using an in-memory log.
+	#     This means the mirror will not remember its sync status across
+	#     crashes/reboots and the entire mirror will be re-synced. If a
+	#     mirror image fails, the mirror will convert to a non-mirrored
+	#     device if there is only one remaining good copy.
+	#   allocate
+	#     Remove the faulty device and try to allocate space on a new
+	#     device to be a replacement for the failed device. Using this
+	#     policy for the log is fast and maintains the ability to remember
+	#     sync state through crashes/reboots. Using this policy for a
+	#     mirror device is slow, as it requires the mirror to resynchronize
+	#     the devices, but it will preserve the mirror characteristic of
+	#     the device. This policy acts like 'remove' if no suitable device
+	#     and space can be allocated for the replacement.
+	#   allocate_anywhere
+	#     Not yet implemented. Useful to place the log device temporarily
+	#     on the same physical volume as one of the mirror images. This
+	#     policy is not recommended for mirror devices since it would break
+	#     the redundant nature of the mirror. This policy acts like
+	#     'remove' if no suitable device and space can be allocated for the
+	#     replacement.
+	# 
+	mirror_image_fault_policy = "remove"
+
+	# Configuration option activation/mirror_log_fault_policy.
+	# Defines how a device failure in a 'mirror' log LV is handled.
+	# The mirror_image_fault_policy description for mirrored LVs also
+	# applies to mirrored log LVs.
+	mirror_log_fault_policy = "allocate"
+
+	# Configuration option activation/snapshot_autoextend_threshold.
+	# Auto-extend a snapshot when its usage exceeds this percent.
+	# Setting this to 100 disables automatic extension.
+	# The minimum value is 50 (a smaller value is treated as 50.)
+	# Also see snapshot_autoextend_percent.
+	# Automatic extension requires dmeventd to be monitoring the LV.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
+	# snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
+	# 840M, it is extended to 1.44G:
+	# snapshot_autoextend_threshold = 70
+	# 
+	snapshot_autoextend_threshold = 100
+
+	# Configuration option activation/snapshot_autoextend_percent.
+	# Auto-extending a snapshot adds this percent extra space.
+	# The amount of additional space added to a snapshot is this
+	# percent of its current size.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
+	# snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
+	# 840M, it is extended to 1.44G:
+	# snapshot_autoextend_percent = 20
+	# 
+	snapshot_autoextend_percent = 20
+
+	# Configuration option activation/thin_pool_autoextend_threshold.
+	# Auto-extend a thin pool when its usage exceeds this percent.
+	# Setting this to 100 disables automatic extension.
+	# The minimum value is 50 (a smaller value is treated as 50.)
+	# Also see thin_pool_autoextend_percent.
+	# Automatic extension requires dmeventd to be monitoring the LV.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
+	# thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
+	# 840M, it is extended to 1.44G:
+	# thin_pool_autoextend_threshold = 70
+	# 
+	thin_pool_autoextend_threshold = 100
+
+	# Configuration option activation/thin_pool_autoextend_percent.
+	# Auto-extending a thin pool adds this percent extra space.
+	# The amount of additional space added to a thin pool is this
+	# percent of its current size.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
+	# thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
+	# 840M, it is extended to 1.44G:
+	# thin_pool_autoextend_percent = 20
+	# 
+	thin_pool_autoextend_percent = 20
+
+	# Configuration option activation/vdo_pool_autoextend_threshold.
+	# Auto-extend a VDO pool when its usage exceeds this percent.
+	# Setting this to 100 disables automatic extension.
+	# The minimum value is 50 (a smaller value is treated as 50.)
+	# Also see vdo_pool_autoextend_percent.
+	# Automatic extension requires dmeventd to be monitoring the LV.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 10G
+	# VDO pool exceeds 7G, it is extended to 12G, and when it exceeds
+	# 8.4G, it is extended to 14.4G:
+	# vdo_pool_autoextend_threshold = 70
+	# 
+	vdo_pool_autoextend_threshold = 100
+
+	# Configuration option activation/vdo_pool_autoextend_percent.
+	# Auto-extending a VDO pool adds this percent extra space.
+	# The amount of additional space added to a VDO pool is this
+	# percent of its current size.
+	# 
+	# Example
+	# Using 70% autoextend threshold and 20% autoextend size, when a 10G
+	# VDO pool exceeds 7G, it is extended to 12G, and when it exceeds
+	# 8.4G, it is extended to 14.4G:
+	# This configuration option has an automatic default value.
+	# vdo_pool_autoextend_percent = 20
+
+	# Configuration option activation/mlock_filter.
+	# Do not mlock these memory areas.
+	# While activating devices, I/O to devices being (re)configured is
+	# suspended. As a precaution against deadlocks, LVM pins memory it is
+	# using so it is not paged out, and will not require I/O to reread.
+	# Groups of pages that are known not to be accessed during activation
+	# do not need to be pinned into memory. Each string listed in this
+	# setting is compared against each line in /proc/self/maps, and the
+	# pages corresponding to lines that match are not pinned. On some
+	# systems, locale-archive was found to make up over 80% of the memory
+	# used by the process.
+	# 
+	# Example
+	# mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
+	# 
+	# This configuration option is advanced.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option activation/use_mlockall.
+	# Use the old behavior of mlockall to pin all memory.
+	# Prior to version 2.02.62, LVM used mlockall() to pin the whole
+	# process's memory while activating devices.
+	use_mlockall = 0
+
+	# Configuration option activation/monitoring.
+	# Monitor LVs that are activated.
+	# The --ignoremonitoring option overrides this setting.
+	# When enabled, LVM will ask dmeventd to monitor activated LVs.
+	monitoring = 1
+
+	# Configuration option activation/polling_interval.
+	# Check pvmove or lvconvert progress at this interval (seconds).
+	# When pvmove or lvconvert must wait for the kernel to finish
+	# synchronising or merging data, they check and report progress at
+	# intervals of this number of seconds. If this is set to 0 and there
+	# is only one thing to wait for, there are no progress reports, but
+	# the process is awoken immediately once the operation is complete.
+	polling_interval = 15
+
+	# Configuration option activation/auto_set_activation_skip.
+	# Set the activation skip flag on new thin snapshot LVs.
+	# The --setactivationskip option overrides this setting.
+	# An LV can have a persistent 'activation skip' flag. The flag causes
+	# the LV to be skipped during normal activation. The lvchange/vgchange
+	# -K option is required to activate LVs that have the activation skip
+	# flag set. When this setting is enabled, the activation skip flag is
+	# set on new thin snapshot LVs.
+	# This configuration option has an automatic default value.
+	# auto_set_activation_skip = 1
+
+	# Configuration option activation/activation_mode.
+	# How LVs with missing devices are activated.
+	# The --activationmode option overrides this setting.
+	# 
+	# Accepted values:
+	#   complete
+	#     Only allow activation of an LV if all of the Physical Volumes it
+	#     uses are present. Other PVs in the Volume Group may be missing.
+	#   degraded
+	#     Like complete, but additionally RAID LVs of segment type raid1,
+	#     raid4, raid5, radid6 and raid10 will be activated if there is no
+	#     data loss, i.e. they have sufficient redundancy to present the
+	#     entire addressable range of the Logical Volume.
+	#   partial
+	#     Allows the activation of any LV even if a missing or failed PV
+	#     could cause data loss with a portion of the LV inaccessible.
+	#     This setting should not normally be used, but may sometimes
+	#     assist with data recovery.
+	# 
+	activation_mode = "degraded"
+
+	# Configuration option activation/lock_start_list.
+	# Locking is started only for VGs selected by this list.
+	# The rules are the same as those for volume_list.
+	# This configuration option does not have a default value defined.
+
+	# Configuration option activation/auto_lock_start_list.
+	# Locking is auto-started only for VGs selected by this list.
+	# The rules are the same as those for auto_activation_volume_list.
+	# This configuration option does not have a default value defined.
+}
+
+# Configuration section metadata.
+# This configuration section has an automatic default value.
+# metadata {
+
+	# Configuration option metadata/check_pv_device_sizes.
+	# Check device sizes are not smaller than corresponding PV sizes.
+	# If device size is less than corresponding PV size found in metadata,
+	# there is always a risk of data loss. If this option is set, then LVM
+	# issues a warning message each time it finds that the device size is
+	# less than corresponding PV size. You should not disable this unless
+	# you are absolutely sure about what you are doing!
+	# This configuration option is advanced.
+	# This configuration option has an automatic default value.
+	# check_pv_device_sizes = 1
+
+	# Configuration option metadata/record_lvs_history.
+	# When enabled, LVM keeps history records about removed LVs in
+	# metadata. The information that is recorded in metadata for
+	# historical LVs is reduced when compared to original
+	# information kept in metadata for live LVs. Currently, this
+	# feature is supported for thin and thin snapshot LVs only.
+	# This configuration option has an automatic default value.
+	# record_lvs_history = 0
+
+	# Configuration option metadata/lvs_history_retention_time.
+	# Retention time in seconds after which a record about individual
+	# historical logical volume is automatically destroyed.
+	# A value of 0 disables this feature.
+	# This configuration option has an automatic default value.
+	# lvs_history_retention_time = 0
+
+	# Configuration option metadata/pvmetadatacopies.
+	# Number of copies of metadata to store on each PV.
+	# The --pvmetadatacopies option overrides this setting.
+	# 
+	# Accepted values:
+	#   2
+	#     Two copies of the VG metadata are stored on the PV, one at the
+	#     front of the PV, and one at the end.
+	#   1
+	#     One copy of VG metadata is stored at the front of the PV.
+	#   0
+	#     No copies of VG metadata are stored on the PV. This may be
+	#     useful for VGs containing large numbers of PVs.
+	# 
+	# This configuration option is advanced.
+	# This configuration option has an automatic default value.
+	# pvmetadatacopies = 1
+
+	# Configuration option metadata/vgmetadatacopies.
+	# Number of copies of metadata to maintain for each VG.
+	# The --vgmetadatacopies option overrides this setting.
+	# If set to a non-zero value, LVM automatically chooses which of the
+	# available metadata areas to use to achieve the requested number of
+	# copies of the VG metadata. If you set a value larger than the the
+	# total number of metadata areas available, then metadata is stored in
+	# them all. The value 0 (unmanaged) disables this automatic management
+	# and allows you to control which metadata areas are used at the
+	# individual PV level using pvchange --metadataignore y|n.
+	# This configuration option has an automatic default value.
+	# vgmetadatacopies = 0
+
+	# Configuration option metadata/pvmetadatasize.
+	# The default size of the metadata area in units of 512 byte sectors.
+	# The metadata area begins at an offset of the page size from the start
+	# of the device. The first PE is by default at 1 MiB from the start of
+	# the device. The space between these is the default metadata area size.
+	# The actual size of the metadata area may be larger than what is set
+	# here due to default_data_alignment making the first PE a MiB multiple.
+	# The metadata area begins with a 512 byte header and is followed by a
+	# circular buffer used for VG metadata text. The maximum size of the VG
+	# metadata is about half the size of the metadata buffer. VGs with large
+	# numbers of PVs or LVs, or VGs containing complex LV structures, may need
+	# additional space for VG metadata. The --metadatasize option overrides
+	# this setting.
+	# This configuration option does not have a default value defined.
+	# This configuration option has an automatic default value.
+
+	# Configuration option metadata/pvmetadataignore.
+	# Ignore metadata areas on a new PV.
+	# The --metadataignore option overrides this setting.
+	# If metadata areas on a PV are ignored, LVM will not store metadata
+	# in them.
+	# This configuration option is advanced.
+	# This configuration option has an automatic default value.
+	# pvmetadataignore = 0
+
+	# Configuration option metadata/stripesize.
+	# This configuration option is advanced.
+	# This configuration option has an automatic default value.
+	# stripesize = 64
+# }
+
+# Configuration section report.
+# LVM report command output formatting.
+# This configuration section has an automatic default value.
+# report {
+
+	# Configuration option report/output_format.
+	# Format of LVM command's report output.
+	# If there is more than one report per command, then the format
+	# is applied for all reports. You can also change output format
+	# directly on command line using --reportformat option which
+	# has precedence over log/output_format setting.
+	# Accepted values:
+	#   basic
+	#     Original format with columns and rows. If there is more than
+	#     one report per command, each report is prefixed with report's
+	#     name for identification.
+	#   json
+	#     JSON format.
+	# This configuration option has an automatic default value.
+	# output_format = "basic"
+
+	# Configuration option report/compact_output.
+	# Do not print empty values for all report fields.
+	# If enabled, all fields that don't have a value set for any of the
+	# rows reported are skipped and not printed. Compact output is
+	# applicable only if report/buffered is enabled. If you need to
+	# compact only specified fields, use compact_output=0 and define
+	# report/compact_output_cols configuration setting instead.
+	# This configuration option has an automatic default value.
+	# compact_output = 0
+
+	# Configuration option report/compact_output_cols.
+	# Do not print empty values for specified report fields.
+	# If defined, specified fields that don't have a value set for any
+	# of the rows reported are skipped and not printed. Compact output
+	# is applicable only if report/buffered is enabled. If you need to
+	# compact all fields, use compact_output=1 instead in which case
+	# the compact_output_cols setting is then ignored.
+	# This configuration option has an automatic default value.
+	# compact_output_cols = ""
+
+	# Configuration option report/aligned.
+	# Align columns in report output.
+	# This configuration option has an automatic default value.
+	# aligned = 1
+
+	# Configuration option report/buffered.
+	# Buffer report output.
+	# When buffered reporting is used, the report's content is appended
+	# incrementally to include each object being reported until the report
+	# is flushed to output which normally happens at the end of command
+	# execution. Otherwise, if buffering is not used, each object is
+	# reported as soon as its processing is finished.
+	# This configuration option has an automatic default value.
+	# buffered = 1
+
+	# Configuration option report/headings.
+	# Show headings for columns on report.
+	# This configuration option has an automatic default value.
+	# headings = 1
+
+	# Configuration option report/separator.
+	# A separator to use on report after each field.
+	# This configuration option has an automatic default value.
+	# separator = " "
+
+	# Configuration option report/list_item_separator.
+	# A separator to use for list items when reported.
+	# This configuration option has an automatic default value.
+	# list_item_separator = ","
+
+	# Configuration option report/prefixes.
+	# Use a field name prefix for each field reported.
+	# This configuration option has an automatic default value.
+	# prefixes = 0
+
+	# Configuration option report/quoted.
+	# Quote field values when using field name prefixes.
+	# This configuration option has an automatic default value.
+	# quoted = 1
+
+	# Configuration option report/columns_as_rows.
+	# Output each column as a row.
+	# If set, this also implies report/prefixes=1.
+	# This configuration option has an automatic default value.
+	# columns_as_rows = 0
+
+	# Configuration option report/binary_values_as_numeric.
+	# Use binary values 0 or 1 instead of descriptive literal values.
+	# For columns that have exactly two valid values to report
+	# (not counting the 'unknown' value which denotes that the
+	# value could not be determined).
+	# This configuration option has an automatic default value.
+	# binary_values_as_numeric = 0
+
+	# Configuration option report/time_format.
+	# Set time format for fields reporting time values.
+	# Format specification is a string which may contain special character
+	# sequences and ordinary character sequences. Ordinary character
+	# sequences are copied verbatim. Each special character sequence is
+	# introduced by the '%' character and such sequence is then
+	# substituted with a value as described below.
+	# 
+	# Accepted values:
+	#   %a
+	#     The abbreviated name of the day of the week according to the
+	#     current locale.
+	#   %A
+	#     The full name of the day of the week according to the current
+	#     locale.
+	#   %b
+	#     The abbreviated month name according to the current locale.
+	#   %B
+	#     The full month name according to the current locale.
+	#   %c
+	#     The preferred date and time representation for the current
+	#     locale (alt E)
+	#   %C
+	#     The century number (year/100) as a 2-digit integer. (alt E)
+	#   %d
+	#     The day of the month as a decimal number (range 01 to 31).
+	#     (alt O)
+	#   %D
+	#     Equivalent to %m/%d/%y. (For Americans only. Americans should
+	#     note that in other countries%d/%m/%y is rather common. This
+	#     means that in international context this format is ambiguous and
+	#     should not be used.
+	#   %e
+	#     Like %d, the day of the month as a decimal number, but a leading
+	#     zero is replaced by a space. (alt O)
+	#   %E
+	#     Modifier: use alternative local-dependent representation if
+	#     available.
+	#   %F
+	#     Equivalent to %Y-%m-%d (the ISO 8601 date format).
+	#   %G
+	#     The ISO 8601 week-based year with century as adecimal number.
+	#     The 4-digit year corresponding to the ISO week number (see %V).
+	#     This has the same format and value as %Y, except that if the
+	#     ISO week number belongs to the previous or next year, that year
+	#     is used instead.
+	#   %g
+	#     Like %G, but without century, that is, with a 2-digit year
+	#     (00-99).
+	#   %h
+	#     Equivalent to %b.
+	#   %H
+	#     The hour as a decimal number using a 24-hour clock
+	#     (range 00 to 23). (alt O)
+	#   %I
+	#     The hour as a decimal number using a 12-hour clock
+	#     (range 01 to 12). (alt O)
+	#   %j
+	#     The day of the year as a decimal number (range 001 to 366).
+	#   %k
+	#     The hour (24-hour clock) as a decimal number (range 0 to 23);
+	#     single digits are preceded by a blank. (See also %H.)
+	#   %l
+	#     The hour (12-hour clock) as a decimal number (range 1 to 12);
+	#     single digits are preceded by a blank. (See also %I.)
+	#   %m
+	#     The month as a decimal number (range 01 to 12). (alt O)
+	#   %M
+	#     The minute as a decimal number (range 00 to 59). (alt O)
+	#   %O
+	#     Modifier: use alternative numeric symbols.
+	#   %p
+	#     Either "AM" or "PM" according to the given time value,
+	#     or the corresponding strings for the current locale. Noon is
+	#     treated as "PM" and midnight as "AM".
+	#   %P
+	#     Like %p but in lowercase: "am" or "pm" or a corresponding
+	#     string for the current locale.
+	#   %r
+	#     The time in a.m. or p.m. notation. In the POSIX locale this is
+	#     equivalent to %I:%M:%S %p.
+	#   %R
+	#     The time in 24-hour notation (%H:%M). For a version including
+	#     the seconds, see %T below.
+	#   %s
+	#     The number of seconds since the Epoch,
+	#     1970-01-01 00:00:00 +0000 (UTC)
+	#   %S
+	#     The second as a decimal number (range 00 to 60). (The range is
+	#     up to 60 to allow for occasional leap seconds.) (alt O)
+	#   %t
+	#     A tab character.
+	#   %T
+	#     The time in 24-hour notation (%H:%M:%S).
+	#   %u
+	#     The day of the week as a decimal, range 1 to 7, Monday being 1.
+	#     See also %w. (alt O)
+	#   %U
+	#     The week number of the current year as a decimal number,
+	#     range 00 to 53, starting with the first Sunday as the first
+	#     day of week 01. See also %V and %W. (alt O)
+	#   %V
+	#     The ISO 8601 week number of the current year as a decimal number,
+	#     range 01 to 53, where week 1 is the first week that has at least
+	#     4 days in the new year. See also %U and %W. (alt O)
+	#   %w
+	#     The day of the week as a decimal, range 0 to 6, Sunday being 0.
+	#     See also %u. (alt O)
+	#   %W
+	#     The week number of the current year as a decimal number,
+	#     range 00 to 53, starting with the first Monday as the first day
+	#     of week 01. (alt O)
+	#   %x
+	#     The preferred date representation for the current locale without
+	#     the time. (alt E)
+	#   %X
+	#     The preferred time representation for the current locale without
+	#     the date. (alt E)
+	#   %y
+	#     The year as a decimal number without a century (range 00 to 99).
+	#     (alt E, alt O)
+	#   %Y
+	#     The year as a decimal number including the century. (alt E)
+	#   %z
+	#     The +hhmm or -hhmm numeric timezone (that is, the hour and minute
+	#     offset from UTC).
+	#   %Z
+	#     The timezone name or abbreviation.
+	#   %%
+	#     A literal '%' character.
+	# 
+	# This configuration option has an automatic default value.
+	# time_format = "%Y-%m-%d %T %z"
+
+	# Configuration option report/devtypes_sort.
+	# List of columns to sort by when reporting 'lvm devtypes' command.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# devtypes_sort = "devtype_name"
+
+	# Configuration option report/devtypes_cols.
+	# List of columns to report for 'lvm devtypes' command.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# devtypes_cols = "devtype_name,devtype_max_partitions,devtype_description"
+
+	# Configuration option report/devtypes_cols_verbose.
+	# List of columns to report for 'lvm devtypes' command in verbose mode.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# devtypes_cols_verbose = "devtype_name,devtype_max_partitions,devtype_description"
+
+	# Configuration option report/lvs_sort.
+	# List of columns to sort by when reporting 'lvs' command.
+	# See 'lvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# lvs_sort = "vg_name,lv_name"
+
+	# Configuration option report/lvs_cols.
+	# List of columns to report for 'lvs' command.
+	# See 'lvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# lvs_cols = "lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
+
+	# Configuration option report/lvs_cols_verbose.
+	# List of columns to report for 'lvs' command in verbose mode.
+	# See 'lvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# lvs_cols_verbose = "lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile"
+
+	# Configuration option report/vgs_sort.
+	# List of columns to sort by when reporting 'vgs' command.
+	# See 'vgs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# vgs_sort = "vg_name"
+
+	# Configuration option report/vgs_cols.
+	# List of columns to report for 'vgs' command.
+	# See 'vgs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# vgs_cols = "vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
+
+	# Configuration option report/vgs_cols_verbose.
+	# List of columns to report for 'vgs' command in verbose mode.
+	# See 'vgs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# vgs_cols_verbose = "vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
+
+	# Configuration option report/pvs_sort.
+	# List of columns to sort by when reporting 'pvs' command.
+	# See 'pvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvs_sort = "pv_name"
+
+	# Configuration option report/pvs_cols.
+	# List of columns to report for 'pvs' command.
+	# See 'pvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
+
+	# Configuration option report/pvs_cols_verbose.
+	# List of columns to report for 'pvs' command in verbose mode.
+	# See 'pvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
+
+	# Configuration option report/segs_sort.
+	# List of columns to sort by when reporting 'lvs --segments' command.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# segs_sort = "vg_name,lv_name,seg_start"
+
+	# Configuration option report/segs_cols.
+	# List of columns to report for 'lvs --segments' command.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# segs_cols = "lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
+
+	# Configuration option report/segs_cols_verbose.
+	# List of columns to report for 'lvs --segments' command in verbose mode.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# segs_cols_verbose = "lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
+
+	# Configuration option report/pvsegs_sort.
+	# List of columns to sort by when reporting 'pvs --segments' command.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvsegs_sort = "pv_name,pvseg_start"
+
+	# Configuration option report/pvsegs_cols.
+	# List of columns to sort by when reporting 'pvs --segments' command.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvsegs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
+
+	# Configuration option report/pvsegs_cols_verbose.
+	# List of columns to sort by when reporting 'pvs --segments' command in verbose mode.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvsegs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
+
+	# Configuration option report/vgs_cols_full.
+	# List of columns to report for lvm fullreport's 'vgs' subreport.
+	# See 'vgs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# vgs_cols_full = "vg_all"
+
+	# Configuration option report/pvs_cols_full.
+	# List of columns to report for lvm fullreport's 'vgs' subreport.
+	# See 'pvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvs_cols_full = "pv_all"
+
+	# Configuration option report/lvs_cols_full.
+	# List of columns to report for lvm fullreport's 'lvs' subreport.
+	# See 'lvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# lvs_cols_full = "lv_all"
+
+	# Configuration option report/pvsegs_cols_full.
+	# List of columns to report for lvm fullreport's 'pvseg' subreport.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvsegs_cols_full = "pvseg_all,pv_uuid,lv_uuid"
+
+	# Configuration option report/segs_cols_full.
+	# List of columns to report for lvm fullreport's 'seg' subreport.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# segs_cols_full = "seg_all,lv_uuid"
+
+	# Configuration option report/vgs_sort_full.
+	# List of columns to sort by when reporting lvm fullreport's 'vgs' subreport.
+	# See 'vgs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# vgs_sort_full = "vg_name"
+
+	# Configuration option report/pvs_sort_full.
+	# List of columns to sort by when reporting lvm fullreport's 'vgs' subreport.
+	# See 'pvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvs_sort_full = "pv_name"
+
+	# Configuration option report/lvs_sort_full.
+	# List of columns to sort by when reporting lvm fullreport's 'lvs' subreport.
+	# See 'lvs -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# lvs_sort_full = "vg_name,lv_name"
+
+	# Configuration option report/pvsegs_sort_full.
+	# List of columns to sort by when reporting for lvm fullreport's 'pvseg' subreport.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# pvsegs_sort_full = "pv_uuid,pvseg_start"
+
+	# Configuration option report/segs_sort_full.
+	# List of columns to sort by when reporting lvm fullreport's 'seg' subreport.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# This configuration option has an automatic default value.
+	# segs_sort_full = "lv_uuid,seg_start"
+
+	# Configuration option report/mark_hidden_devices.
+	# Use brackets [] to mark hidden devices.
+	# This configuration option has an automatic default value.
+	# mark_hidden_devices = 1
+
+	# Configuration option report/two_word_unknown_device.
+	# Use the two words 'unknown device' in place of '[unknown]'.
+	# This is displayed when the device for a PV is not known.
+	# This configuration option has an automatic default value.
+	# two_word_unknown_device = 0
+# }
+
+# Configuration section dmeventd.
+# Settings for the LVM event daemon.
+dmeventd {
+
+	# Configuration option dmeventd/mirror_library.
+	# The library dmeventd uses when monitoring a mirror device.
+	# libdevmapper-event-lvm2mirror.so attempts to recover from
+	# failures. It removes failed devices from a volume group and
+	# reconfigures a mirror as necessary. If no mirror library is
+	# provided, mirrors are not monitored through dmeventd.
+	mirror_library = "libdevmapper-event-lvm2mirror.so"
+
+	# Configuration option dmeventd/raid_library.
+	# This configuration option has an automatic default value.
+	# raid_library = "libdevmapper-event-lvm2raid.so"
+
+	# Configuration option dmeventd/snapshot_library.
+	# The library dmeventd uses when monitoring a snapshot device.
+	# libdevmapper-event-lvm2snapshot.so monitors the filling of snapshots
+	# and emits a warning through syslog when the usage exceeds 80%. The
+	# warning is repeated when 85%, 90% and 95% of the snapshot is filled.
+	snapshot_library = "libdevmapper-event-lvm2snapshot.so"
+
+	# Configuration option dmeventd/thin_library.
+	# The library dmeventd uses when monitoring a thin device.
+	# libdevmapper-event-lvm2thin.so monitors the filling of a pool
+	# and emits a warning through syslog when the usage exceeds 80%. The
+	# warning is repeated when 85%, 90% and 95% of the pool is filled.
+	thin_library = "libdevmapper-event-lvm2thin.so"
+
+	# Configuration option dmeventd/thin_command.
+	# The plugin runs command with each 5% increment when thin-pool data volume
+	# or metadata volume gets above 50%.
+	# Command which starts with 'lvm ' prefix is internal lvm command.
+	# You can write your own handler to customise behaviour in more details.
+	# User handler is specified with the full path starting with '/'.
+	# This configuration option has an automatic default value.
+	# thin_command = "lvm lvextend --use-policies"
+
+	# Configuration option dmeventd/vdo_library.
+	# The library dmeventd uses when monitoring a VDO pool device.
+	# libdevmapper-event-lvm2vdo.so monitors the filling of a pool
+	# and emits a warning through syslog when the usage exceeds 80%. The
+	# warning is repeated when 85%, 90% and 95% of the pool is filled.
+	# This configuration option has an automatic default value.
+	# vdo_library = "libdevmapper-event-lvm2vdo.so"
+
+	# Configuration option dmeventd/vdo_command.
+	# The plugin runs command with each 5% increment when VDO pool volume
+	# gets above 50%.
+	# Command which starts with 'lvm ' prefix is internal lvm command.
+	# You can write your own handler to customise behaviour in more details.
+	# User handler is specified with the full path starting with '/'.
+	# This configuration option has an automatic default value.
+	# vdo_command = "lvm lvextend --use-policies"
+
+	# Configuration option dmeventd/executable.
+	# The full path to the dmeventd binary.
+	# This configuration option has an automatic default value.
+	# executable = "/sbin/dmeventd"
+}
+
+# Configuration section tags.
+# Host tag settings.
+# This configuration section has an automatic default value.
+# tags {
+
+	# Configuration option tags/hosttags.
+	# Create a host tag using the machine name.
+	# The machine name is nodename returned by uname(2).
+	# This configuration option has an automatic default value.
+	# hosttags = 0
+
+	# Configuration section tags/<tag>.
+	# Replace this subsection name with a custom tag name.
+	# Multiple subsections like this can be created. The '@' prefix for
+	# tags is optional. This subsection can contain host_list, which is a
+	# list of machine names. If the name of the local machine is found in
+	# host_list, then the name of this subsection is used as a tag and is
+	# applied to the local machine as a 'host tag'. If this subsection is
+	# empty (has no host_list), then the subsection name is always applied
+	# as a 'host tag'.
+	# 
+	# Example
+	# The host tag foo is given to all hosts, and the host tag
+	# bar is given to the hosts named machine1 and machine2.
+	# tags { foo { } bar { host_list = [ "machine1", "machine2" ] } }
+	# 
+	# This configuration section has variable name.
+	# This configuration section has an automatic default value.
+	# tag {
+
+		# Configuration option tags/<tag>/host_list.
+		# A list of machine names.
+		# These machine names are compared to the nodename returned
+		# by uname(2). If the local machine name matches an entry in
+		# this list, the name of the subsection is applied to the
+		# machine as a 'host tag'.
+		# This configuration option does not have a default value defined.
+	# }
+# }