Browse Source

sysctl: Use Debian Bullseye's values as default

Signed-off-by: Maximilian Wilhelm <max@sdn.clinic>
Maximilian Wilhelm 3 months ago
parent
commit
51cb518159
2 changed files with 10 additions and 70 deletions
  1. 10 2
      sysctl/sysctl.conf
  2. 0 68
      sysctl/sysctl.conf.Debian.bullseye

+ 10 - 2
sysctl/sysctl.conf

@@ -1,6 +1,6 @@
 #
 # /etc/sysctl.conf - Configuration file for setting system variables
-# See /etc/sysctl.d/ for additional system variables
+# See /etc/sysctl.d/ for additional system variables.
 # See sysctl.conf (5) for information.
 #
 
@@ -9,7 +9,7 @@
 # Uncomment the following to stop low-level messages on console
 #kernel.printk = 3 4 1 3
 
-##############################################################3
+###################################################################
 # Functions previously found in netbase
 #
 
@@ -58,3 +58,11 @@
 # Log Martian Packets
 #net.ipv4.conf.all.log_martians = 1
 #
+
+###################################################################
+# Magic system request Key
+# 0=disable, 1=enable all, >1 bitmask of sysrq functions
+# See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html
+# for what other values do
+#kernel.sysrq=438
+

+ 0 - 68
sysctl/sysctl.conf.Debian.bullseye

@@ -1,68 +0,0 @@
-#
-# /etc/sysctl.conf - Configuration file for setting system variables
-# See /etc/sysctl.d/ for additional system variables.
-# See sysctl.conf (5) for information.
-#
-
-#kernel.domainname = example.com
-
-# Uncomment the following to stop low-level messages on console
-#kernel.printk = 3 4 1 3
-
-###################################################################
-# Functions previously found in netbase
-#
-
-# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
-# Turn on Source Address Verification in all interfaces to
-# prevent some spoofing attacks
-#net.ipv4.conf.default.rp_filter=1
-#net.ipv4.conf.all.rp_filter=1
-
-# Uncomment the next line to enable TCP/IP SYN cookies
-# See http://lwn.net/Articles/277146/
-# Note: This may impact IPv6 TCP sessions too
-#net.ipv4.tcp_syncookies=1
-
-# Uncomment the next line to enable packet forwarding for IPv4
-#net.ipv4.ip_forward=1
-
-# Uncomment the next line to enable packet forwarding for IPv6
-#  Enabling this option disables Stateless Address Autoconfiguration
-#  based on Router Advertisements for this host
-#net.ipv6.conf.all.forwarding=1
-
-
-###################################################################
-# Additional settings - these settings can improve the network
-# security of the host and prevent against some network attacks
-# including spoofing attacks and man in the middle attacks through
-# redirection. Some network environments, however, require that these
-# settings are disabled so review and enable them as needed.
-#
-# Do not accept ICMP redirects (prevent MITM attacks)
-#net.ipv4.conf.all.accept_redirects = 0
-#net.ipv6.conf.all.accept_redirects = 0
-# _or_
-# Accept ICMP redirects only for gateways listed in our default
-# gateway list (enabled by default)
-# net.ipv4.conf.all.secure_redirects = 1
-#
-# Do not send ICMP redirects (we are not a router)
-#net.ipv4.conf.all.send_redirects = 0
-#
-# Do not accept IP source route packets (we are not a router)
-#net.ipv4.conf.all.accept_source_route = 0
-#net.ipv6.conf.all.accept_source_route = 0
-#
-# Log Martian Packets
-#net.ipv4.conf.all.log_martians = 1
-#
-
-###################################################################
-# Magic system request Key
-# 0=disable, 1=enable all, >1 bitmask of sysrq functions
-# See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html
-# for what other values do
-#kernel.sysrq=438
-